Commit bf9aa490db introduced a compression API in compress_io.{c,h} to
make reuse easier, and allow adding more compression algorithms.
However, pg_backup_archiver.c was not switched to this API and continued
to call the compression directly.
This commit teaches pg_backup_archiver.c about the compression API, so
that it can benefit from bf9aa490db (simpler code, easier addition of
new compression methods).
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Rachel Heaton, Justin Pryzby, Tomas Vondra
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss%3D%40protonmail.com
pg_restore -l has always been able to read the TOC data of a dump even
if its binary has no support for compression, for both compressed and
uncompressed dumps. 5e73a60 has introduced a backward-incompatible
behavior by switching a warning to a hard error in the code path reading
the header data of a dump, preventing the TOC items to be listed even if
pg_restore -l, with no support for compression, is used on a compressed
dump. Most modern systems should have support for zlib, but it can be
also possible that somebody relies on the past behavior when copying
over a dump where binaries are not built with zlib support (most likely
some WIN32 flavors these days, though most environments should provide
that).
There is no easy way to have a regression test for this pattern, as it
requires a mix of dump/restore commands with different compilation
options, with and without compression. One possibility I see here would
be to have a command-line option that enforces a non-compression check
for a build that supports compression, but that does not seem worth the
cost, either.
Reported-by: Justin Pryzby
Author: Georgios Kokolatos
Discussion: https://postgr.es/m/20230125180020.GF22427@telsasoft.com
If the public schema has a non-default owner (perhaps due to
dropping and recreating it) then use of pg_dump's "--if-exists"
option results in a warning message:
warning: could not find where to insert IF EXISTS in statement "-- *not* dropping schema, since initdb creates it"
This is harmless since the dump output is the same either way,
but nonetheless it's undesirable. It's the fault of commit
a7a7be1f2, which created situations where a TOC entry's "defn"
or "dropStmt" fields could be just comments. Although that
commit fixed up the kluges in pg_backup_archiver.c that munge defn
strings, it missed doing so for the one that munges dropStmts.
Per bug# 17753 from Justin Zhang.
Discussion: https://postgr.es/m/17753-9c8773631747ee1c@postgresql.org
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
This is a second attempt at committing 1b4d280ea. The difference
from the first time is that now we can add some filtering rules to
AdjustUpgrade.pm to allow cross-version upgrade testing to pass
despite all the cosmetic changes in CREATE VIEW outputs.
Amit Langote (filtering rules by me)
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
Discussion: https://postgr.es/m/891521.1673657296@sss.pgh.pa.us
This reverts commit 1b4d280ea1.
It's broken the buildfarm members that run cross-version-upgrade tests,
because they're not prepared to deal with cosmetic differences between
CREATE VIEW commands emitted by older servers and HEAD. Even if we had
a solution to that, which we don't, it'd take some time to roll it out
to the affected animals. This improvement isn't valuable enough to
justify addressing that problem on an emergency basis, so revert it
for now.
The rule system needs "old" and/or "new" pseudo-RTEs in rule actions
that are ON INSERT/UPDATE/DELETE. Historically it's put such entries
into the ON SELECT rules of views as well, but those are really quite
vestigial. The only thing we've used them for is to carry the
view's relid forward to AcquireExecutorLocks (so that we can
re-lock the view to verify it hasn't changed before re-using a plan)
and to carry its relid and permissions data forward to execution-time
permissions checks. What we can do instead of that is to retain
these fields of the RTE_RELATION RTE for the view even after we
convert it to an RTE_SUBQUERY RTE. This requires a tiny amount of
extra complication in the planner and AcquireExecutorLocks, but on
the other hand we can get rid of the logic that moves that data from
one place to another.
The principal immediate benefit of doing this, aside from a small
saving in the pg_rewrite data for views, is that these pseudo-RTEs
no longer trigger ruleutils.c's heuristic about qualifying variable
names when the rangetable's length is more than 1. That results
in quite a number of small simplifications in regression test outputs,
which are all to the good IMO.
Bump catversion because we need to dump a few more fields of
RTE_SUBQUERY RTEs. While those will always be zeroes anyway in
stored rules (because we'd never populate them until query rewrite)
they are useful for debugging, and it seems like we'd better make
sure to transmit such RTEs accurately in plans sent to parallel
workers. I don't think the executor actually examines these fields
after startup, but someday it might.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqEf7gPN4Hn+LoZ4tP2q_Qt7n3vw7-6fJKOf92tSEnX6Gg@mail.gmail.com
In both partitioning and traditional inheritance, require child
columns to be GENERATED if and only if their parent(s) are.
Formerly we allowed the case of an inherited column being
GENERATED when its parent isn't, but that results in inconsistent
behavior: the column can be directly updated through an UPDATE
on the parent table, leading to it containing a user-supplied
value that might not match the generation expression. This also
fixes an oversight that we enforced partition-key-columns-can't-
be-GENERATED against parent tables, but not against child tables
that were dynamically attached to them.
Also, remove the restriction that the child's generation expression
be equivalent to the parent's. In the wake of commit 3f7836ff6,
there doesn't seem to be any reason that we need that restriction,
since generation expressions are always computed per-table anyway.
By removing this, we can also allow a child to merge multiple
inheritance parents with inconsistent generation expressions, by
overriding them with its own expression, much as we've long allowed
for DEFAULT expressions.
Since we're rejecting a case that we used to accept, this doesn't
seem like a back-patchable change. Given the lack of field
complaints about the inconsistent behavior, it's likely that no
one is doing this anyway, but we won't change it in minor releases.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
Combine multiple LOCK TABLE commands to reduce the number of
round trips to the server. This is particularly helpful when
dumping from a remote server, but it seems useful even without
that. In particular, shortening the time from seeing a table
in pg_class to acquiring lock on it reduces the window for
trouble from concurrent DDL.
Aleksander Alekseev, reviewed by Fabrízio de Royes Mello,
Gilles Darold, and Andres Freund
Discussion: https://postgr.es/m/CAJ7c6TO4z1+OBa-R+fC8FnaUgbEWJUf2Kq=nRngTW5EXtKru2g@mail.gmail.com
While on it, newlines are removed from the end of two elog() strings.
The others are simple grammar mistakes. One comment in pg_upgrade
referred incorrectly to sequences since a7e5457.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20221230231257.GI1153@telsasoft.com
Backpatch-through: 11
This commit changes some of the bbstreamer files and pg_dump to use the
same style as a few other places (like common/compression.c), where the
name of the compression method is not part of the string, but an
argument of it. This reduces a bit the translation work with less
string patterns.
Discussion: https://postgr.es/m/Y5/5tdK+4n3clvtU@paquier.xyz
The USER SET flag specifies that the variable should be set on behalf of an
ordinary role. That lets ordinary roles set placeholder variables, which
permission requirements are not known yet. Such a value wouldn't be used if
the variable finally appear to require superuser privileges.
The new flags are stored in the pg_db_role_setting.setuser array. Catversion
is bumped.
This commit is inspired by the previous work by Steve Chavez.
Discussion: https://postgr.es/m/CAPpHfdsLd6E--epnGqXENqLP6dLwuNZrPMcNYb3wJ87WR7UBOQ%40mail.gmail.com
Author: Alexander Korotkov, Steve Chavez
Reviewed-by: Pavel Borisov, Steve Chavez
By default, the contents generated by the custom and directory dump
formats are compressed. However, with the existing test facility, the
restore program will succeed regardless of whether the dumped output was
compressed or not without checking if anything has been compressed.
This commit implements a portable way to check the contents of the
custom and directory dump formats:
- glob_patterns, that can be defined for each test as an array of
glob()-compilable strings, tracking the contents that should or should
not be compressed. While this is useful to make sure that the table
data is compressed, this also checks that blobs.toc and toc.dat are
never compressed.
- command_like, to execute a command on a dump and check its generated
output. This is used here in correlation with pg_restore -l to check if
the dumps have been compressed or not, depending on if the build
supports gzip, or not.
This hole in the tests has come up when working on 5e73a60, where
compression has to be applied by default, if available, for both dump
formats.
The idea of glob_patterns comes from me, and Georgios has come up with
the design for command_like.
Author: Georgios Kokolatos, Michael Paquier
Discussion: https://postgr.es/m/DQn4czCWR1rcbGPLL7p3LfEr5-kGmlySm-H05VgroINdikvhtS5r9EdI6b8D8sjnbKdJ09k-cxs2AqijBeHAWk9Q8gvEAxPRHuLRhwONcGc=@pm.me
For historical reasons, pg_dump refers to large objects as "BLOBs".
This term is not used anywhere else in PostgreSQL, and it also means
something different in the SQL standard and other SQL systems.
This patch renames internal functions, code comments, documentation,
etc. to use the "large object" or "LO" terminology instead. There is
no functionality change, so the archive format still uses the name
"BLOB" for the archive entry. Additional long command-line options
are added with the new naming.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/868a381f-4650-9460-1726-1ffd39a270b4%40enterprisedb.com
This is present in the declaration for ReadDataFromArchive, so we'd better
have it in the definition too in order to avoid compilers from complaining
about the mismatch of function signatures.
Compression specifications are currently used by pg_basebackup and
pg_receivewal, and are able to let the user control in an extended way
the method and level of compression used. As an effect of this commit,
pg_dump's -Z/--compress is now able to use more than just an integer, as
of the grammar "method[:detail]".
The method can be either "none" or "gzip", and can optionally take a
detail string. If the detail string is only an integer, it defines the
compression level. A comma-separated list of keywords can also be used
method allows for more options, the only keyword supported now is
"level".
The change is backward-compatible, hence specifying only an integer
leads to no compression for a level of 0 and gzip compression when the
level is greater than 0.
Most of the code changes are straight-forward, as pg_dump was relying on
an integer tracking the compression level to check for gzip or no
compression. These are changed to use a compression specification and
the algorithm stored in it.
As of this change, note that the dump format is not bumped because there
is no need yet to track the compression algorithm in the TOC entries.
Hence, we still rely on the compression level to make the difference
when reading them. This will be mandatory once a new compression method
is added, though.
In order to keep the code simpler when parsing the compression
specification, the code is changed so as pg_dump now fails hard when
using gzip on -Z/--compress without its support compiled, rather than
enforcing no compression without the user knowing about it except
through a warning. Like before this commit, archive and custom formats
are compressed by default when the code is compiled with gzip, and left
uncompressed without gzip.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/O4mutIrCES8ZhlXJiMvzsivT7ztAMja2lkdL1LJx6O5f22I2W8PBIeLKz7mDLwxHoibcnRAYJXm1pH4tyUNC4a8eDzLn22a6Pb1S74Niexg=@pm.me
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Similar to how the INHERIT option controls whether or not the
permissions of the granted role are automatically available to the
grantee, the new SET permission controls whether or not the grantee
may use the SET ROLE command to assume the privileges of the granted
role.
In addition, the new SET permission controls whether or not it
is possible to transfer ownership of objects to the target role
or to create new objects owned by the target role using commands
such as CREATE DATABASE .. OWNER. We could alternatively have made
this controlled by the INHERIT option, or allow it when either
option is given. An advantage of this approach is that if you
are granted a predefined role with INHERIT TRUE, SET FALSE, you
can't go and create objects owned by that role.
The underlying theory here is that the ability to create objects
as a target role is not a privilege per se, and thus does not
depend on whether you inherit the target role's privileges. However,
it's surely something you could do anyway if you could SET ROLE
to the target role, and thus making it contingent on whether you
have that ability is reasonable.
Design review by Nathan Bossat, Wolfgang Walther, Jeff Davis,
Peter Eisentraut, and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmob+zDSRS6JXYrgq0NWdzCXuTNzT5eK54Dn2hhgt17nm8A@mail.gmail.com
Avoid having to list all the possible object types twice. Instead,
only _getObjectDescription() needs to know about specific object
types. It communicates back to _printTocEntry() whether an owner is
to be set.
In passing, remove the logic to use ALTER TABLE to set the owner of
views and sequences. This is no longer necessary. Furthermore, if
pg_dump doesn't recognize the object type, this is now a fatal error,
not a warning.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0a00f923-599a-381b-923f-0d802a727715@enterprisedb.com
When the pg_dump 002_pg_dump.pl test generates the command to load the
schema, it does
# Add terminating semicolon
$create_sql{$test_db} .= $tests{$test}->{create_sql} . ";";
In some cases, this creates a duplicate semicolon, but more
importantly, this doesn't add any newline. So if you look at the
result in either the server log or in
tmp_check/log/regress_log_002_pg_dump, it looks like a complete mess.
This patch makes the output look cleaner for manual inspection: add
semicolon only if necessary, and add two newlines.
Discussion: https://www.postgresql.org/message-id/flat/d6aec95a-8729-43cc-2578-f2a5e46640e0%40enterprisedb.com
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Previously, these were declared in postgres_ext.h, but they are not
needed nearly so widely as the OID declarations, so that doesn't
necessarily make sense. Also, because postgres_ext.h is included
before most of c.h has been processed, the previous location creates
some problems for a pending patch.
Patch by me, reviewed by Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoYc8oevMqRokZQ4y_6aRn-7XQny1JBr5DyWR_jiFtONHw@mail.gmail.com
We previously thought that allowing such cases can confuse users when they
specify DROP TABLES IN SCHEMA but that doesn't seem to be the case based
on discussion. This helps to uplift the restriction during
ALTER TABLE ... SET SCHEMA which used to ensure that we couldn't end up
with a publication having both a schema and the same schema's table.
To allow this, we need to forbid having any schema on a publication if
column lists on a table are specified (and vice versa). This is because
otherwise we still need a restriction during ALTER TABLE ... SET SCHEMA to
forbid cases where it could lead to a publication having both a schema and
the same schema's table with column list.
Based on suggestions by Peter Eisentraut.
Author: Hou Zhijie and Vignesh C
Reviewed-By: Peter Smith, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e@enterprisedb.com
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in pg_dump/pg_dumpall
related code.
Affected code happens to be inconsistent in how it applies conventions
around how Archive and Archive Handle variables are named. Significant
code churn is required to fully fix those inconsistencies, so take the
least invasive approach possible: treat function definition names as
authoritative, and mechanically adjust corresponding names from function
definitions to match.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-Wzmma+vzcO6gr5NYDZ+sx0G14aU-UrzFutT2FoRaisVCUQ@mail.gmail.com
This may be a bit too subtle, but removing that word from there makes
this clause no longer a perfect parallel of the GRANT variant "ALL
TABLES IN SCHEMA": indeed, for publications what we record is the schema
itself, not the tables therein, which means that any tables added to the
schema in the future are also published. This is completely different
to what GRANT does, which is affect only the tables that exist when the
command is executed.
There isn't resounding support for this change, but there are a few
positive votes and no opposition. Because the time to 15 RC1 is very
short, let's get this out now.
Backpatch to 15.
Discussion: https://postgr.es/m/2729c9e2-9aac-8cda-f2f4-34f2bcc18f4e
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
In a similar effort to f736e188c and 110d81728, fixup various usages of
string functions where a more appropriate function is available and more
fit for purpose.
These changes include:
1. Use cstring_to_text_with_len() instead of cstring_to_text() when
working with a StringInfoData and the length can easily be obtained.
2. Use appendStringInfoString() instead of appendStringInfo() when no
formatting is required.
3. Use pstrdup(...) instead of psprintf("%s", ...)
4. Use pstrdup(...) instead of psprintf(...) (with no formatting)
5. Use appendPQExpBufferChar() instead of appendPQExpBufferStr() when the
length of the string being appended is 1.
6. appendStringInfoChar() instead of appendStringInfo() when no formatting
is required and string is 1 char long.
7. Use appendPQExpBufferStr(b, .) instead of appendPQExpBuffer(b, "%s", .)
8. Don't use pstrdup when it's fine to just point to the string constant.
I (David) did find other cases of #8 but opted to use #4 instead as I
wasn't certain enough that applying #8 was ok (e.g in hba.c)
Author: Ranier Vilela, David Rowley
Discussion: https://postgr.es/m/CAApHDvo2j2+RJBGhNtUz6BxabWWh2Jx16wMUMWKUjv70Ver1vg@mail.gmail.com
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
The GRANT statement can now specify WITH INHERIT TRUE or WITH
INHERIT FALSE to control whether the member inherits the granted
role's permissions. For symmetry, you can now likewise write
WITH ADMIN TRUE or WITH ADMIN FALSE to turn ADMIN OPTION on or off.
If a GRANT does not specify WITH INHERIT, the behavior based on
whether the member role is marked INHERIT or NOINHERIT. This means
that if all roles are marked INHERIT or NOINHERIT before any role
grants are performed, the behavior is identical to what we had before;
otherwise, it's different, because ALTER ROLE [NO]INHERIT now only
changes the default behavior of future grants, and has no effect on
existing ones.
Patch by me. Reviewed and testing by Nathan Bossart and Tushar Ahuja,
with design-level comments from various others.
Discussion: http://postgr.es/m/CA+Tgmoa5Sf4PiWrfxA=sGzDKg0Ojo3dADw=wAHOhR9dggV=RmQ@mail.gmail.com
In a similar effort to f01592f91, here we're targetting fixing the
warnings that -Wshadow=compatible-local produces that we can fix by moving
a variable to an inner scope to stop that variable from being shadowed by
another variable declared somewhere later in the function.
All of the warnings being fixed here are changing the scope of variables
which are being used as an iterator for a "for" loop. In each instance,
the fix happens to be changing the for loop to use the C99 type
initialization. Much of this code likely pre-dates our use of C99.
Reducing the scope of the outer scoped variable seems like the safest way
to fix these. Renaming seems more likely to risk patches using the wrong
variable. Reducing the scope is more likely to result in a compilation
failure after applying some future patch rather than introducing bugs with
it.
By my count, this takes the warning count from 129 down to 114.
Author: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvrwLGBP%2BYw9vriayyf%3DXR4uPWP5jr6cQhP9au_kaDUhbA%40mail.gmail.com
Previously, membership of role A in role B could be recorded in the
catalog tables only once. This meant that a new grant of role A to
role B would overwrite the previous grant. For other object types, a
new grant of permission on an object - in this case role A - exists
along side the existing grant provided that the grantor is different.
Either grant can be revoked independently of the other, and
permissions remain so long as at least one grant remains. Make role
grants work similarly.
Previously, when granting membership in a role, the superuser could
specify any role whatsoever as the grantor, but for other object types,
the grantor of record must be either the owner of the object, or a
role that currently has privileges to perform a similar GRANT.
Implement the same scheme for role grants, treating the bootstrap
superuser as the role owner since roles do not have owners. This means
that attempting to revoke a grant, or admin option on a grant, can now
fail if there are dependent privileges, and that CASCADE can be used
to revoke these. It also means that you can't grant ADMIN OPTION on
a role back to a user who granted it directly or indirectly to you,
similar to how you can't give WITH GRANT OPTION on a privilege back
to a role which granted it directly or indirectly to you.
Previously, only the superuser could specify GRANTED BY with a user
other than the current user. Relax that rule to allow the grantor
to be any role whose privileges the current user posseses. This
doesn't improve compatibility with what we do for other object types,
where support for GRANTED BY is entirely vestigial, but it makes this
feature more usable and seems to make sense to change at the same time
we're changing related behaviors.
Along the way, fix "ALTER GROUP group_name ADD USER user_name" to
require the same privileges as "GRANT group_name TO user_name".
Previously, CREATEROLE privileges were sufficient for either, but
only the former form was permissible with ADMIN OPTION on the role.
Now, either CREATEROLE or ADMIN OPTION on the role suffices for
either spelling.
Patch by me, reviewed by Stephen Frost.
Discussion: http://postgr.es/m/CA+TgmoaFr-RZeQ+WoQ5nKPv97oT9+aDgK_a5+qWHSgbDsMp1Vg@mail.gmail.com
Compiling with -Wshadow=compatible-local yields quite a few warnings about
local variables being shadowed by compatible local variables in an inner
scope. Of course, this is perfectly valid in C, but we have had bugs in
the past as a result of developers failing to notice this. af7d270dd is a
recent example.
Here we do a cleanup of warnings we receive from -Wshadow=compatible-local
for code which is new to PostgreSQL 15. We've yet to have the discussion
about if we actually ever want to run that as a standard compilation flag.
We'll need to at least get the number of warnings down to something easier
to manage before we can realistically consider if we want this or not.
This commit is the first step towards reducing the warnings.
The changes being made here are all fairly trivial. Because of that, and
the fact that v15 is still in beta, this is being back-patched into 15.
It seems more risky not to do this as the risk of future bugs is increased
by the additional conflicts that this commit could cause for any future
bug fixes touching the same areas as this commit.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220817145434.GC26426%40telsasoft.com
Backpatch-through: 15
We must issue the TRUNCATE command first and update relfrozenxid
and relminmxid afterward; otherwise, TRUNCATE overwrites the
previously-set values.
Add a test case like I should have done the first time.
Per buildfarm report from TestUpgradeXversion.pm, by way of Tom
Lane.
The earlier commit used pg_class.relfilenode where it should have
used pg_class.oid. This could lead to emitting an UPDATE statement
into the dump that would update nothing (or the wrong thing) when
executed in the new cluster, resulting in relfrozenxid and
relminmxid being improperly carried forward for pg_largeobject.
Noticed by Dilip Kumar.
Discussion: http://postgr.es/m/CAFiTN-ty1Gzs6stk2vt9BJiq0m0hzf=aPnh3a-4Z3Tk5GzoENw@mail.gmail.com
Commit 9a974cbcba arranged to preserve
the relfilenode of user tables across pg_upgrade, but failed to notice
that pg_upgrade treats pg_largeobject as a user table and thus it needs
the same treatment. Otherwise, large objects will appear to vanish
after a pg_upgrade.
Commit d498e052b4 fixed this problem
by teaching pg_dump to UPDATE pg_class.relfilenode for pg_largeobject
and its index. However, because an UPDATE on the catalog rows doesn't
change anything on disk, this can leave stray files behind in the new
cluster. They will normally be empty, but it's a little bit untidy.
Hence, this commit arranges to do the same thing using DDL. Specifically,
it makes TRUNCATE work for the pg_largeobject catalog when in
binary-upgrade mode, and it then uses that command in binary-upgrade
dumps as a way of setting pg_class.relfilenode for pg_largeobject and
its index. That way, the old files are removed from the new cluster.
Discussion: http://postgr.es/m/CA+TgmoYYMXGUJO5GZk1-MByJGu_bB8CbOL6GJQC8=Bzt6x6vDg@mail.gmail.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
This reverts commit 617d691412.
While I still think the basic idea is attractive, we need to sort
out what happens with built .c files, and there also seem to be
VPATH issues.
The backend already used a mechanically-generated list of *.c files,
but everywhere else we had a manually-written-out list of files in
which to seek translatable messages. Commit b0a55e432 contains the
latest in a long line of failures to update those lists. Rather than
manually fix its oversight, let's change to using "$(wildcard *.c)"
in all these nls.mk files.
Many of these files also have manual references to some *.c files
in other directories, most often src/common/. Perhaps we should try
to improve that situation too; but it's a bit less clear how, so for
now just fix the local file references.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/20220713.160853.453362706160476128.horikyota.ntt@gmail.com
This moves the list of available languages from nls.mk into a separate
file called po/LINGUAS. Advantages:
- It keeps the parts notionally managed by programmers (nls.mk)
separate from the parts notionally managed by translators (LINGUAS).
- It's the standard practice recommended by the Gettext manual
nowadays.
- The Meson build system also supports this layout (and of course
doesn't know anything about our custom nls.mk), so this would enable
sharing the list of languages between the two build systems.
(The MSVC build system currently finds all po files by globbing, so it
is not affected by this change.)
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/557a9f5c-e871-edc7-2f58-a4140fb65b7b@enterprisedb.com
Commit 9a974cbcba did this for user
tables, but pg_upgrade treats pg_largeobject as a user table, and so
needs the same treatment. Without this fix, if you rewrite the
pg_largeobject table and then perform an upgrade with pg_upgrade, the
table will apparently be empty on the new cluster, while all of your
objects will end up with an orphaned file.
With this fix, instead of the old cluster's pg_largeobject files ending
up orphaned, the original files fro the new cluster do. That's mostly
harmless because we expect the table to be empty, but we might want
to arrange to remove the as part of the upgrade. Since we're still
debating the best way of doing that, I (rhaas) have decided to postpone
dealing with that problem and get the basic fix committed.
Justin Pryzby, reviewed by Shruthi Gowda and by me.
Discussion: http://postgr.es/m/20220701231413.GI13040@telsasoft.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Enforce __pg_log_level message filtering centrally in logging.c,
instead of relying on the calling macros to do it. This is more
reliable (e.g. it works correctly for direct calls to pg_log_generic)
and it saves a percent or so of total code size because we get rid of
so many duplicate checks of __pg_log_level.
This does mean that argument expressions in a logging macro will be
evaluated even if we end up not printing anything. That seems of
little concern for INFO and higher levels as those messages are printed
by default, and most of our frontend programs don't even offer a way to
turn them off. I left the unlikely() checks in place for DEBUG
messages, though.
Discussion: https://postgr.es/m/3993549.1649449609@sss.pgh.pa.us
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
The test logic is extended with two new concepts:
- Addition of a compression command called compress_cmd, executed
between restore_cmd and dump_cmd to control the contents of the dumps.
In the case of this commit, this is used to compress or decompress
elements of a dump to test new code paths.
- Addition of a new flag called compile_option, to check if a set of
tests can be executed depending on the ./configure options used in a
given build.
The tests introduced here are for gzip, but they are designed so as they
can easily be extended for new compression methods.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
Compression with gzip has never been supported in the tar format of
pg_dump since this code has been introduced in c3e18804, as the use of
buffered I/O in gzdopen() changes the file positioning that tar
requires. The original idea behind the use of compression with the tar
mode is to be able to include compressed data files (named %u.dat.gz)
and blob files (blob_%u.dat.gz) in the tarball generated by the dump,
with toc.dat, that tracks down if compression is used in the dump,
always uncompressed.
Note that this commit removes the dump part of the code as well as the
restore part, removing any dependency to zlib in pg_backup_tar.c. There
could be an argument behind keeping around the restore part, but this
would require one to change the internals of a tarball previously dumped
so as data and blob files are compressed with toc.dat itself changed to
track down if compression is enabled. However, the argument about
gzdopen() still holds in the read case with pg_restore.
Removing this code simplifies future additions related to compression in
pg_dump.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
When cross-building to windows, or building with mingw on windows, the build
could fail with
x86_64-w64-mingw32-gcc: error: win32ver.o: No such file or director
because pg_dumpall didn't depend on WIN32RES, but it's recipe references
it. The build nevertheless succeeded most of the time, due to
pg_dump/pg_restore having the required dependency, causing win32ver.o to be
built.
Reported-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJeekpUPWW6yCVdf9=oBAcCp86RrBivo4Y4cwazAzGPng@mail.gmail.com
Backpatch: 10-, omission present on all live branches
This feature allows skipping the transaction on subscriber nodes.
If incoming change violates any constraint, logical replication stops
until it's resolved. Currently, users need to either manually resolve the
conflict by updating a subscriber-side database or by using function
pg_replication_origin_advance() to skip the conflicting transaction. This
commit introduces a simpler way to skip the conflicting transactions.
The user can specify LSN by ALTER SUBSCRIPTION ... SKIP (lsn = XXX),
which allows the apply worker to skip the transaction finished at
specified LSN. The apply worker skips all data modification changes within
the transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Hou Zhijie, Peter Eisentraut, Amit Kapila, Shi Yu, Vignesh C, Greg Nancarrow, Haiying Tang, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
For GENERATED columns, we record all dependencies of the generation
expression as AUTO dependencies of the column itself. This means
that the generated column is silently dropped if any dependency
is removed, even if CASCADE wasn't specified. This is at least
a POLA violation, but I think it's actually based on a misreading
of the standard. The standard does say that you can't drop a
dependent GENERATED column in RESTRICT mode; but that's buried down
in a subparagraph, on a different page from some pseudocode that
makes it look like an AUTO drop is being suggested.
Change this to be more like the way that we handle regular default
expressions, ie record the dependencies as NORMAL dependencies of
the pg_attrdef entry. Also, make the pg_attrdef entry's dependency
on the column itself be INTERNAL not AUTO. That has two effects:
* the column will go away, not just lose its default, if any
dependency of the expression is dropped with CASCADE. So we
don't need any special mechanism to make that happen.
* it provides an additional cross-check preventing someone from
dropping the default expression without dropping the column.
catversion bump because of change in the contents of pg_depend
(which also requires a change in one information_schema view).
Per bug #17439 from Kevin Humphreys. Although this is a longstanding
bug, it seems impractical to back-patch because of the need for
catalog contents changes.
Discussion: https://postgr.es/m/17439-7df4421197e928f0@postgresql.org
This adds the option to use ICU as the default locale provider for
either the whole cluster or a database. New options for initdb,
createdb, and CREATE DATABASE are used to select this.
Since some (legacy) code still uses the libc locale facilities
directly, we still need to set the libc global locale settings even if
ICU is otherwise selected. So pg_database now has three
locale-related fields: the existing datcollate and datctype, which are
always set, and a new daticulocale, which is only set if ICU is
selected. A similar change is made in pg_collation for consistency,
but in that case, only the libc-related fields or the ICU-related
field is set, never both.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5e756dd6-0e91-d778-96fd-b1bcb06c161a%402ndquadrant.com
These tests were added recently, but older code tests USE_LZ4 rathr
than HAVE_LIBLZ4, so let's follow the established precedent. It
also seems more consistent with the intent of the configure tests,
since I think that the USE_* symbols are intended to correspond to
what the user requested, and the HAVE_* symbols to what configure
found while probing.
Discussion: http://postgr.es/m/CA+Tgmoap+hTD2-QNPJLH4tffeFE8MX5+xkbFKMU3FKBy=ZSNKA@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
Slow hosts may avoid load-induced, spurious failures by setting
environment variable PG_TEST_TIMEOUT_DEFAULT to some number of seconds
greater than 180. Developers may see faster failures by setting that
environment variable to some lesser number of seconds. In tests, write
$PostgreSQL::Test::Utils::timeout_default wherever the convention has
been to write 180. This change raises the default for some briefer
timeouts. Back-patch to v10 (all supported versions).
Discussion: https://postgr.es/m/20220218052842.GA3627003@rfd.leadboat.com
Commit 52e4f0cd47 didn't add tests for pg_dump support, so add a few tests
for it. Additionally, verify that catalogs are updated after few
ALTER PUBLICATION commands that modify row filters by using \d.
Reported-by: Tomas Vondra
Author: Shi yu, based on initial by Tomas Vondra
Reviewed-by: Euler Taveira and Amit Kapila
Discussion: https://postgr.es/m/6bdbd7fc-e81a-9a77-d963-24adeb95f29e@enterprisedb.com
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
This adds to database objects the same version tracking that collation
objects have. There is a new pg_database column datcollversion that
stores the version, a new function
pg_database_collation_actual_version() to get the version from the
operating system, and a new subcommand ALTER DATABASE ... REFRESH
COLLATION VERSION.
This was not originally added together with pg_collation.collversion,
since originally version tracking was only supported for ICU, and ICU
on a database-level is not currently supported. But we now have
version tracking for glibc (since PG13), FreeBSD (since PG14), and
Windows (since PG13), so this is useful to have now.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f0ff3190-29a3-5b39-a179-fa32eee57db6%40enterprisedb.com
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
ReadStr returns allocated memory which the caller is responsible for
freeing when done with the string. This commit ensures that memory is
freed in one case which used ReadStr in a conditional. While the leak
might not be too concerning, this makes the code consistent across all
ReadStr callsites in ReadToc. Due to the lack of complaints of issues
in production from this, no backpatch is performed at this point.
Author: Bharath Rupireddy, Georgios Kokolatos
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/oZwKiUxFsVaetG2xOJp7Hwao8F1AKIdfFDQLNJrnwoaxmjyB-45r_aYmhgXHKLcMI3GT24m9L6HafSi2ns7WFxXe0mw2_tIJpD-Z3vb_eyI=@pm.me
The SQL standard has been ambiguous about whether null values in
unique constraints should be considered equal or not. Different
implementations have different behaviors. In the SQL:202x draft, this
has been formalized by making this implementation-defined and adding
an option on unique constraint definitions UNIQUE [ NULLS [NOT]
DISTINCT ] to choose a behavior explicitly.
This patch adds this option to PostgreSQL. The default behavior
remains UNIQUE NULLS DISTINCT. Making this happen in the btree code
is pretty easy; most of the patch is just to carry the flag around to
all the places that need it.
The CREATE UNIQUE INDEX syntax extension is not from the standard,
it's my own invention.
I named all the internal flags, catalog columns, etc. in the negative
("nulls not distinct") so that the default PostgreSQL behavior is the
default if the flag is false.
Reviewed-by: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/84e5ee1b-387e-9a54-c326-9082674bde78@enterprisedb.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
Commit 6df7a9698 wrote appendPQExpBuffer where it should have
written printfPQExpBuffer. This resulted in re-issuing the
previous query along with the desired one, which very accidentally
had no negative consequences except for some wasted cycles.
Back-patch to v14 where that came in.
Discussion: https://postgr.es/m/1714711.1642962663@sss.pgh.pa.us
Commit 5c649fe15 introduced a memory leak into pg_basebackup's
parse_compress_options. (I simplified nearby code while at it.)
Commit 9a974cbcb introduced a memory leak into pg_dump's
binary_upgrade_set_pg_class_oids.
Coverity also complained about a call of SnapBuildProcessChange that
ignored the result, unlike every other call of that function. This
is evidently intentional, so add a (void) cast to indicate that.
(It's also old, dating to b89e15105; I suppose the reason it showed
up now is 7a5f6b474's recent rearrangement of nearby code.)
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
The logic is similar to default_tablespace in some ways, so as no SET
queries on default_table_access_method are generated before dumping or
restoring an object (table or materialized view support table AMs) when
specifying this new option.
This option is useful to enforce the use of a default access method even
if some tables included in a dump use an AM different than the system's
default.
There are already two cases in the TAP tests of pg_dump with a table and
a materialized view that use a non-default table AM, and these are
extended that the new option does not generate SET clauses on
default_table_access_method.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20211207153930.GR17618@telsasoft.com
While user-defined triggers defined on a partitioned table have
a catalog definition for both it and its partitions, internal
triggers used by foreign keys defined on partitioned tables only
have a catalog definition for its partitions. This commit fixes
that so that partitioned tables get the foreign key triggers too,
just like user-defined triggers. Moreover, like user-defined
triggers, partitions' internal triggers will now also have their
tgparentid set appropriately. This is to allow subsequent commit(s)
to make the foreign key related events to be fired in some cases
using the parent table triggers instead of those of partitions'.
This also changes what tgisinternal means in some cases. Currently,
it means either that the trigger is an internal implementation object
of a foreign key constraint, or a "child" trigger on a partition
cloned from the trigger on the parent. This commit changes it to
only mean the former to avoid confusion. As for the latter, it can
be told by tgparentid being nonzero, which is now true both for user-
defined and foreign key's internal triggers.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Arne Roland <A.Roland@index.de>
Discussion: https://postgr.es/m/CA+HiwqG7LQSK+n8Bki8tWv7piHD=PnZro2y6ysU2-28JS6cfgQ@mail.gmail.com
Get rid of the "username_subquery" mechanism in favor of doing
local lookups of role names from role OIDs. The PG backend isn't
terribly smart about scalar SubLinks in SELECT output lists,
so this offers a small performance improvement, at least in
installations with more than a couple of users. In any case
the old method didn't make for particularly readable SQL code.
While at it, I removed the various custom warning messages about
failing to find an object's owner, in favor of just fatal'ing
in the local lookup function. AFAIK there is no reason any
longer to treat that as anything but a catalog-corruption case,
and certainly no reason to make translators deal with a dozen
different messages where one would do. (If it turns out that
fatal() is indeed a bad idea, we can back off to issuing
pg_log_warning() and returning an empty string, resulting in
the same behavior as before, except more consistent.)
Also drop an entirely unnecessary sub-SELECT to check on the
pg_depend status of a sequence relation: we already have a
LEFT JOIN to fetch the row of interest in the FROM clause.
Discussion: https://postgr.es/m/2460369.1640903318@sss.pgh.pa.us
dumpPublication, dumpPublicationNamespace, dumpPublicationTable, and
dumpSubscription failed to check dataOnly. This is just a latent bug,
because pg_backup_archiver.c would filter out the ArchiveEntry later;
but they're wasting cycles in data-only dumps, and the omission might
become a live bug someday. In any case, it's not good to have some
dumpFoo functions do this and some not.
On the same reasoning, make dumpPublicationNamespace follow the
same pattern as every other dumpFoo function for checking the
DUMP_COMPONENT_DEFINITION flag. (Since 5209c0ba0, we wouldn't
even get here if that flag isn't set, so checking it is just
pro forma right now. But it might not be so forever.)
Since this is just cosmetic and/or future-proofing, no need for
back-patch.
In the wake of commits 05649b88c and 5209c0ba0, findComments() and
findSecLabels() no longer use their "Archive *fout" arguments,
so get rid of those.
While doing that, I noticed that there's no very good reason why
dumpCompositeTypeColComments() should be doing its own query to fetch
the column names of the composite type, when the calling function has
just fetched the same data. Tweak it to use that query result. This
probably doesn't save a lot for most people, because since 5209c0ba0
we won't get into this code at all unless the composite type has at
least one comment. Nonetheless, it's a wasted query.
Coverity complained that parts of dumpFunc() and buildACLCommands()
were now unreachable, as indeed they are. Remove 'em.
In passing, make dumpFunc's handling of protrftypes less gratuitously
different from other fields.
Server versions for which there was a plausible reason to
use this switch are all out of support now. Leaving it
around would accomplish little except to let careless DBAs
shoot themselves in the foot.
Discussion: https://postgr.es/m/556122.1639520324@sss.pgh.pa.us
Per discussion, we'll limit support for old servers to those branches
that can still be built easily on modern platforms, which as of now
is 9.2 and up. Remove over a thousand lines of code dedicated to
dumping from older server versions. (As in previous changes of
this sort, we aren't removing pg_restore's ability to read older
archive files ... though it's fair to wonder how that might be
tested nowadays.) This cleans up some dead code left behind by
commit 989596152.
Discussion: https://postgr.es/m/2923349.1634942313@sss.pgh.pa.us
In parallel mode, pg_dump tries to order the table-data-dumping
jobs with the largest tables first. However, it was only
consulting the pg_class.relpages value to determine table size.
This ignores TOAST data, and so we could make poor scheduling
decisions in cases where some large tables are mostly TOASTed
data while others have very little. To fix, add in the relpages
value for the TOAST table as well.
This patch also fixes a potential integer-overflow issue that
could result in poor scheduling on machines where off_t is
only 32 bits wide. Such platforms are probably extinct in the
wild, but we do still nominally support them, so repair.
Per complaint from Hans Buschmann.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
For objects such as functions, pg_dump issues the same secondary
data-collection query against each object to be dumped. This can't
readily be refactored to avoid the repetitive queries, but we can
PREPARE these queries to reduce planning costs.
This patch applies the idea to functions, aggregates, operators, and
data types. While it could be carried further, the remaining sorts of
objects aren't likely to appear in typical databases enough times to
be worth worrying over. Moreover, doing the PREPARE is likely to be a
net loss if there aren't at least some dozens of objects to apply the
prepared query to.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Instead of issuing a secondary data-collection query against each
table to be dumped, issue just one query, with a WHERE clause
restricting it to be applied to only the tables we intend to dump.
Likewise for indexes, constraints, and triggers. This greatly
reduces the number of queries needed to dump a database containing
many tables. It might seem that WHERE clauses listing many target
OIDs could be inefficient, but at least on recent server versions
this provides a very substantial speedup.
(In principle the same thing could be done with other object types
such as functions; but that would require significant refactoring
of pg_dump, so those will be tackled in a different way in a
following patch.)
The new WHERE clauses depend on the unnest() function, which is
only present in 8.4 and above. We could implement them differently
for older servers, but there is an ongoing discussion that will
probably result in dropping pg_dump support for servers before 9.2,
so that seems like it'd be wasted work. For now, just bump the
server version check to require >= 8.4, without stopping to remove
any of the code that's thereby rendered dead. We'll mop that
situation up soon.
Patch by me, based on an idea from Andres Freund.
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Avoid calling pg_get_partkeydef(), pg_get_expr(relpartbound),
and regtypeout until we have lock on the relevant tables.
The existing coding is at serious risk of failure if there
are any concurrent DROP TABLE commands going on --- including
drops of other sessions' temp tables.
Arguably this is a bug fix that should be back-patched, but it's
moderately invasive and we've not had all that many complaints
about such failures. Let's just put it in HEAD for now.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Throw away most of the existing logic for this, as it was very
inefficient thanks to expensive sub-selects executed to collect
ACL data that we very possibly would have no interest in dumping.
Reduce the ACL handling in the initial per-object-type queries
to be just collection of the catalog ACL fields, as it was
originally. Fetch pg_init_privs data separately in a single
scan of that catalog, and do the merging calculations on the
client side. Remove the separate code path used for pre-9.6
source servers; there is no good reason to treat them differently
from newer servers that happen to have empty pg_init_privs.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Split the DumpableObject.dump bitmask field into separate bitmasks
tracking which components are requested to be dumped (in the
existing "dump" field) and which components exist for the particular
object (in the new "components" field). This gets rid of some
klugy and easily-broken logic that involved setting bits and later
clearing them. More importantly, it restores the originally intended
behavior that pg_dump's secondary data-gathering queries should not
be executed for objects we have no interest in dumping. That
optimization got broken when the dump flag was turned into a bitmask,
because irrelevant bits tended to remain set in many cases. Since
the "components" field starts from a minimal set of bits and is
added onto as needed, ANDing it with "dump" provides a reliable
indicator of what we actually have to dump, without having to
complicate the logic that manages the request bits. This makes
a significant difference in the number of queries needed when,
for example, there are many functions in extensions.
Discussion: https://postgr.es/m/2273648.1634764485@sss.pgh.pa.us
Discussion: https://postgr.es/m/7d7eb6128f40401d81b3b7a898b6b4de@W2012-02.nidsa.loc
Checking for RELKIND_MATVIEW was forgotten in
guessConstraintInheritance(). This isn't a live problem, since it is
checked in flagInhTables() which relkinds can have parents, and those
entries will have numParents==0 after that. But after discussion it
was felt that this place should be kept consistent with
flagInhTables() and flagInhAttrs().
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/a574c8f1-9c84-93ad-a9e5-65233d6fc00f@enterprisedb.com
When a stored expression depends on a user-defined cast, the backend
records the dependency as being on the cast's implementation function
--- or indeed, if there's no cast function involved but just
RelabelType or CoerceViaIO, no dependency is recorded at all. This
is problematic for pg_dump, which is at risk of dumping things in the
wrong order leading to restore failures. Given the lack of previous
reports, the risk isn't that high, but it can be demonstrated if the
cast is used in some view whose rowtype is then used as an input or
result type for some other function. (That results in the view
getting hoisted into the functions portion of the dump, ahead of
the cast.)
A logically bulletproof fix for this would require including the
cast's OID in the parsed form of the expression, whence it could be
extracted by dependency.c, and then the stored dependency would force
pg_dump to do the right thing. Such a change would be fairly invasive,
and certainly not back-patchable. Moreover, since we'd prefer that
an expression using cast syntax be equal() to one doing the same
thing by explicit function call, the cast OID field would have to
have special ignored-by-comparisons semantics, making things messy.
So, let's instead fix this by a very simple hack in pg_dump: change
the object-type priority order so that casts are initially sorted
before functions, immediately after types. This fixes the problem
in a fairly direct way for casts that have no implementation function.
For those that do, the implementation function will be hoisted to just
before the cast by the dependency sorting step, so that we still have
a valid dump order. (I'm not sure that this provides a full guarantee
of no problems; but since it's been like this for many years without
any previous reports, this is probably enough to fix it in practice.)
Per report from Дмитрий Иванов.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPL5KHoGa3uvyKp6z6m48LwCnTsK+LRQ_mcA4uKGfqAVSEjV_A@mail.gmail.com
If a table contains a generated column that's preceded by a dropped
column, dumpTableData_insert failed to account for the dropped
column, and would emit DEFAULT placeholder(s) in the wrong column(s).
This resulted in failures at restore time. The default COPY code path
did not have this bug, likely explaining why it wasn't noticed sooner.
While we're fixing this, we can be a little smarter about the
situation: (1) avoid unnecessarily fetching the values of generated
columns, (2) omit generated columns from the output, too, if we're
using --column-inserts. While these modes aren't expected to be
as high-performance as the COPY path, we might as well be as
efficient as we can; it doesn't add much complexity.
Per report from Дмитрий Иванов.
Back-patch to v12 where generated columns came in.
Discussion: https://postgr.es/m/CAPL5KHrkBniyQt5e1rafm5DdXvbgiiqfEQEJ9GjtVzN71Jj5pA@mail.gmail.com
Coverity complained that applying get_gz_error after a failed gzclose,
as we did in one place in pg_basebackup, is unsafe. I think it's
right: it's entirely likely that the call is touching freed memory.
Change that to inspect errno, as we do for other gzclose calls.
Also, be careful to initialize errno to zero immediately before any
gzclose() call where we care about the error status. (There are
some calls where we don't, because we already failed at some previous
step.) This ensures that we don't get a misleadingly irrelevant
error code if gzclose() fails in a way that doesn't set errno.
We could work harder at that, but it looks to me like all such cases
are basically can't-happen if we're not misusing zlib, so it's
not worth the extra notational cruft that would be required.
Also, fix several places that simply failed to check for close-time
errors at all, mostly at some remove from the close or gzclose itself;
and one place that did check but didn't bother to report the errno.
Back-patch to v12. These mistakes are older than that, but between
the frontend logging API changes that happened in v12 and the fact
that frontend code can't rely on %m before that, the patch would need
substantial revision to work in older branches. It doesn't quite
seem worth the trouble given the lack of related field complaints.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1343113.1636489231@sss.pgh.pa.us
Commit 5a2832465f introduced some enums to represent all tables in schema
publications and used REL in their names. Use TABLE instead of REL in
those enums to avoid confusion with other objects like SEQUENCES that can
be part of a publication in the future.
In the passing, (a) Change one of the newly introduced error messages to
make it consistent for Create and Alter commands, (b) add missing alias in
one of the SQL Statements that is used to print publications associated
with the table.
Reported-by: Tomas Vondra, Peter Smith
Author: Vignesh C
Reviewed-by: Hou Zhijie, Peter Smith
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ%40mail.gmail.com
Re-ordering the #include's is a bit problematic here because
libpq/libpq-be.h needs to include <openssl/ssl.h>. Instead,
let's #undef the unwanted macro after all the #includes.
This is definitely uglier than the other way, but it should
work despite possible future header rearrangements.
(A look at the openssl headers indicates that X509_NAME is the
only conflicting symbol that we use.)
In passing, remove a related but long-incorrect comment in
pg_backup_archiver.h.
Discussion: https://postgr.es/m/1051867.1635720347@sss.pgh.pa.us
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
I found these by running pg_dump under "valgrind --leak-check=full".
The changes in flagInhIndexes() and getIndexes() replace allocation of
an array of which we use only some elements by individual allocations
of just the actually-needed objects. The previous coding wasted some
memory, but more importantly it confused valgrind's leak tracking.
collectComments() and collectSecLabels() remain major blots on
the valgrind report, because they don't PQclear their query
results, in order to avoid a lot of strdup's. That's a dubious
tradeoff, but I'll leave it alone here; an upcoming patch will
modify those functions enough to justify changing the tradeoff.
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
Create a hash table that indexes dumpable objects by CatalogId
(that is, catalog OID + object OID). Use this to replace the
former catalogIdMap array, as well as various other single-
catalog index arrays, and also the extension membership map.
In principle this should be faster for databases with many objects,
since lookups are now O(1) not O(log N). However, it seems that these
lookups are pretty much negligible in context, so that no overall
performance change can be measured. But having only one lookup
data structure to maintain makes the code simpler and more flexible,
so let's do it anyway.
Discussion: https://postgr.es/m/2595220.1634855245@sss.pgh.pa.us
Non-global default privilege entries should be dumped as-is,
not made relative to the default ACL for their object type.
This would typically only matter if one had revoked some
on-by-default privileges in a global entry, and then wanted
to grant them again in a non-global entry.
Per report from Boris Korzun. This is an old bug, so back-patch
to all supported branches.
Neil Chen, test case by Masahiko Sawada
Discussion: https://postgr.es/m/111621616618184@mail.yandex.ru
Discussion: https://postgr.es/m/CAA3qoJnr2+1dVJObNtfec=qW4Z0nz=A9+r5bZKoTSy5RDjskMw@mail.gmail.com
Along the same lines as 047329624, ed2c7f65b and daa9fe8a5, reduce
code duplication by having just one copy of the parts of the query
that are the same across all server versions; and make the
conditionals control the smallest possible amount of code.
This also gets rid of the confusing assortment of different ways
to accomplish the same result that we had here before.
While at it, make sure all three relevant parts of the function
list the fields in the same order. This is just neatnik-ism,
of course.
Discussion: https://postgr.es/m/1240992.1634419055@sss.pgh.pa.us
If the blob TOC file cannot be parsed, the error message was failing
to print the filename as the variable holding it was shadowed by the
destination buffer for parsing. When the filename fails to parse,
the error will print an empty string:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "": ..
..instead of the intended error message:
./pg_restore -d foo -F d dump
pg_restore: error: invalid line in large object TOC file "dump/blobs.toc": ..
Fix by renaming both variables as the shared name was too generic to
store either and still convey what the variable held.
Backpatch all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/A2B151F5-B32B-4F2C-BA4A-6870856D9BDE@yesql.se
Backpatch-through: 9.6
Make sure that the string parsing is limited by the size of the
destination buffer.
In pg_basebackup the available values sent from the server
is limited to two characters so there was no risk of overflow.
In pg_dump the buffer is bounded by MAXPGPATH, and thus the limit
must be inserted via preprocessor expansion and the buffer increased
by one to account for the terminator. There is no risk of overflow
here, since in this case, the buffer scanned is smaller than the
destination buffer.
Backpatch the pg_basebackup fix to 11 where it was introduced, and
the pg_dump fix all the way down to 9.6.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/B14D3D7B-F98C-4E20-9459-C122C67647FB@yesql.se
Backpatch-through: 11 and 9.6
It was clearly the intent to do so all along, but the original coding
fat-fingered this by checking the wrong array element. We fixed it
in passing in 403a3d91c, but that later got reverted, and we forgot
to keep this bug fix.
Most of the time this'd be relatively harmless, since once we lock
any of the partitioned table's leaf partitions, that would suffice
to prevent major DDL on the partitioned table itself. However, a
childless partitioned table would get dumped with no relevant lock
whatsoever, possibly allowing dump failure or inconsistent output.
Unlike 403a3d91c, there are no versioning concerns, since every server
version that has partitioned tables will allow you to lock one.
Back-patch to v10 where partitioned tables were introduced.
Discussion: https://postgr.es/m/1018205.1634346327@sss.pgh.pa.us
This switches the default ACL to what the documentation has recommended
since CVE-2018-1058. Upgrades will carry forward any old ownership and
ACL. Sites that declined the 2018 recommendation should take a fresh
look. Recipes for commissioning a new database cluster from scratch may
need to create a schema, grant more privileges, etc. Out-of-tree test
suites may require such updates.
Reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/20201031163518.GB4039133@rfd.leadboat.com
Coverity complained that one caller of getFormattedTypeName() failed
to free the returned string. Which is true, but rather than fixing
that one, let's get rid of this tedious and error-prone requirement.
Now that getFormattedTypeName() caches its result, strdup'ing that
result and expecting the caller to free it accomplishes little except
to waste cycles. We do create a leak in the case where getTypes didn't
make a TypeInfo for the type, but that basically shouldn't ever happen.
Back-patch, as commit 6c450a861 was. This isn't a particularly
interesting bug fix, but the API change seems like a hazard for
future back-patching activity if we don't back-patch it.
The code printing expressions for extended statistics doubled the
parens, producing results like ((a+1)), which is unnecessary and not
consistent with how we print expressions elsewhere.
Fixed by tweaking the code to produce just a single set of parens.
Reported by Mark Dilger, fix by me. Backpatch to 14, where support for
extended statistics on expressions was added.
Reported-by: Mark Dilger
Discussion: https://postgr.es/m/20210122040101.GF27167%40telsasoft.com
For no particularly good reason, getPolicies() queried pg_policy
separately for each table. We can collect all the policies in
a single query instead, and attach them to the correct TableInfo
objects using findTableByOid() lookups. On the regression
database, this reduces the number of queries substantially, and
provides a visible savings even when running against a local
server.
Per complaint from Hubert Depesz Lubaczewski. Since this is such
a simple fix and can have a visible performance benefit, back-patch
to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
There's long been a "TODO: there might be some value in caching
the results" annotation on pg_dump's getFormattedTypeName function;
but we hadn't gotten around to checking what it was costing us to
repetitively look up type names. It turns out that when dumping the
current regression database, about 10% of the total number of queries
issued are duplicative format_type() queries. However, Hubert Depesz
Lubaczewski reported a not-unusual case where these account for over
half of the queries issued by pg_dump. Individually these queries
aren't expensive, but when network lag is a factor, they add up to a
problem. We can very easily add some caching to getFormattedTypeName
to solve it.
Since this is such a simple fix and can have a visible performance
benefit, back-patch to all supported branches.
Discussion: https://postgr.es/m/20210826084430.GA26282@depesz.com
When looping over the resultset from a SQL query, extracting the field
number before the loop body to avoid repeated calls to PQfnumber is an
established pattern. On very wide tables this can have a performance
impact, but it wont be noticeable in the common case. This fixes a few
queries which were extracting the field number in the loop body.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/OS0PR01MB57164C392783F29F6D0ECA0B94139@OS0PR01MB5716.jpnprd01.prod.outlook.com
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
Tomas Vondra
Peter Eisentraut
Michael Paquier
Tom Lane
John Naylor
Amit Kapila
Bruce Momjian
Andrew Dunstan
Jeff Davis
Alexander Korotkov
David Rowley
Robert Haas
Andres Freund
Peter Geoghegan
Alvaro Herrera
Thomas Munro
Daniel Gustafsson
Noah Misch