This can be used to build 64 bit Windows binaries, not only on 64 bit
Windows but on supported cross-compiling hosts including 32 bit Windows,
Cygwin, Darwin and Linux.
reduce_outer_joins() mistakenly treated a semijoin like a left join for
purposes of deciding whether not-null constraints created by the join's
quals could be passed down into the join's left-hand side (possibly
resulting in outer-join simplification there). Actually, semijoin works
like inner join for this purpose, ie, we do not need to see any rows that
can't possibly satisfy the quals. Hence, two-line fix to treat semi and
inner joins alike. Per observation by Andres Freund about a performance
gripe from Yazan Suleiman.
Back-patch to 8.4, since this oversight has been there since the current
handling of semijoins was implemented.
When included, this makes the base backup a complete working
"clone" of the initial database, ready to have a postmaster
started against it without the need to set up any log archiving
or similar.
Magnus Hagander, reviewed by Fujii Masao and Heikki Linnakangas
When we need to insert a new entry and the queue is full, compact the
entire queue in the hopes of making room for the new entry. Doing this
on every insertion might worsen contention on BgWriterCommLock, but
when the queue it's full, it's far better than allowing the backend to
perform its own fsync, per testing by Greg Smith as reported in
http://archives.postgresql.org/pgsql-hackers/2011-01/msg02665.php
Original idea from Greg Smith. Patch by me. Review by Chris Browne
and Greg Smith
We only need that header when compiling with icc, since the gcc variant of
ia64_get_bsp() uses in-line assembly code. Per report from Frank Brendel,
the header doesn't exist on all IA64 platforms; so don't include it unless
we need it.
This reverts commit a06e41deeb of 2011-01-26.
Per discussion, this behavior is not wanted, as it would need to change if
we ever made composite types support DEFAULT.
In the case where the initial call of systable_getnext_ordered() returned
NULL, this function would nonetheless call it again. That's undefined
behavior that only by chance failed to not give visibly incorrect results.
Put an if-test around the final loop to prevent that, and in passing
improve some comments. No back-patch since there's no actual failure.
Per report from YAMAMOTO Takashi.
Synchronize pg_config.h.in with configure.in (someone must have
forgotten to run autoheader or autoreconf), and clean up some spurious
change in configure introduced by the last commit there.
Use the built-in TypeError, not SPIError, for errors having to do with
argument counts or types. Use SPIError, not simply plpy.Error, for
errors in PLy_spi_execute_plan. Finally, do not set a Python
exception if PyArg_ParseTuple failed, as it already sets the correct
exception.
Jan Urbański
The previous coding prevented ALTER TABLE .. ADD COLUMN from being used
with a non-NULL default in situations where the table's rowtype was being
used elsewhere. But this is a completely arbitrary restriction since
you could do the same operation in multiple steps (add the column, add
the default, update the table).
Inspired by a patch from Noah Misch, though I didn't use his code.
There isn't any need to track this state on a table-wide basis, and trying
to do so introduces undesirable semantic fuzziness. Move the flag to
pg_index, where it clearly describes just a single index and can be
immutable after index creation.
This feature allows a unique or pkey constraint to be created using an
already-existing unique index. While the constraint isn't very
functionally different from the bare index, it's nice to be able to do that
for documentation purposes. The main advantage over just issuing a plain
ALTER TABLE ADD UNIQUE/PRIMARY KEY is that the index can be created with
CREATE INDEX CONCURRENTLY, so that there is not a long interval where the
table is locked against updates.
On the way, refactor some of the code in DefineIndex() and index_create()
so that we don't have to pass through those functions in order to create
the index constraint's catalog entries. Also, in parse_utilcmd.c, pass
around the ParseState pointer in struct CreateStmtContext to save on
notation, and add error location pointers to some error reports that didn't
have one before.
Gurjeet Singh, reviewed by Steve Singer and Tom Lane
This is still pretty rough - among other things, the documentation
needs work, and the messages need a visit from the style police -
but this gets the basic framework in place.
KaiGai Kohei
While doing this, also move base backup options into
a struct instead of increasing the number of parameters
to multiple functions for each new option.
The target of sscanf with a %o format had better be of integer width,
but "mode_t" conceivably isn't that. Another compiler warning seen
only on some platforms; this one I think is potentially a real bug
and not just a warning.
Include the lefttype/righttype columns explicitly (instead of assuming
the reader can deduce them from the operator or function description),
and move the operator or function description to the end of the string,
to make it clearer that it's a referenced object and not the amop or
amproc item itself. Per extensive discussion of Andreas Karlsson's
original patch.
Andreas Karlsson, Tom Lane
This reverts commit 740e54ca84, which seems
to have tickled an optimization bug in gcc 4.5.x, as reported upstream at
https://bugzilla.redhat.com/show_bug.cgi?id=671899
Since this patch had no purpose beyond code beautification, it's not
worth expending a lot of effort to look for another workaround.
This tool makes it possible to do the pg_start_backup/
copy files/pg_stop_backup step in a single command.
There are still some steps to be done before this is a
complete backup solution, such as the ability to stream
the required WAL logs, but it's still usable, and
could do with some buildfarm coverage.
In passing, make the checkpoint request optionally
fast instead of hardcoding it.
Magnus Hagander, reviewed by Fujii Masao and Dimitri Fontaine
As in commit fb4c5d2798 on 2011-01-21,
this avoids spurious debug messages and allows idempotent changes at
any time. Along the way, make assign_XactIsoLevel allow idempotent
changes even when not within a subtransaction, to be consistent with
the new coding of assign_transaction_read_only and because there's
no compelling reason to do otherwise.
Kevin Grittner, with some adjustments.
It's not clear to me what should happen to the other plpython_unicode
variant expected files, but this patch gets things passing on my own
machines and at least some of the buildfarm.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Not sure why I'm seeing this on Fedora 14 and not earlier versions.
Seems like a regression that gcc no longer knows that DIE() doesn't return.
Still, adding a dummy return is harmless enough.
It appears that gcc 4.5 can issue such warnings for whole structs, not
just scalar variables as in the past. Refactor some pg_dump code slightly
so that the OutputContext local variables are always initialized, even
if they won't be used. It's cheap enough to not be worth worrying about.
Global error handling led to confusion and was hard to manage. With
this change, errors from PostgreSQL are immediately reported to Python
as exceptions. This requires setting a Python exception after
reporting the caught PostgreSQL error as a warning, because PLy_elog
destroys the Python exception state.
Ideally, all places where PostgreSQL errors need to be reported back
to Python should be wrapped in subtransactions, to make going back to
Python from a longjmp safe. This will be handled in a separate patch.
Jan Urbański
The previous coding treated anything that wasn't an autovacuum launcher
as a normal backend, which is wrong now that we also have WAL senders.
Fujii Masao, reviewed by Robert Haas, Alvaro Herrera, Tom Lane,
and Bernd Helmle.
The new coding avoids a spurious debug message when a transaction
that has changed the isolation level has been rolled back. It also
allows the property to be freely changed to the current value within
a subtransaction.
Kevin Grittner, with one small change by me.
The way the exception types where added to the module was wrong for
Python 3. Exception classes were not actually available from plpy.
Fix that by factoring out code that is responsible for defining new
Python exceptions and make it work with Python 3. New regression test
makes sure the plpy module has the expected contents.
Jan Urbanśki, slightly revised by me
Failure to do so can lead to constraint violations. This was broken by
commit 1ddc2703a9 on 2010-02-07, so
back-patch to 9.0.
Noah Misch. Regression test by me.
Pay attention to the attisdropped field and skip over TupleDesc fields
that have it set. Not a real problem until we get table returning
functions, but it's the right thing to do anyway.
Jan Urbański
If the function using yield to return rows fails halfway, the iterator
stays open and subsequent calls to the function will resume reading
from it. The fix is to unref the iterator and set it to NULL if there
has been an error.
Jan Urbański
We can get the length of a compressed or out-of-line datum without actually
detoasting it. If the lengths of two strings are unequal, we can then
conclude they are unequal without detoasting. That saves considerable work
in an admittedly less-common case, without costing anything much when the
optimization doesn't apply.
Noah Misch
Two separate hash tables are used for regular procedures and for
trigger procedures, since the way trigger procedures work is quite
different from normal stored procedures. Change the signatures of
PLy_procedure_{get,create} to accept the function OID and a Boolean
flag indicating whether it's a trigger. This should make implementing
a PL/Python validator easier.
Using HTABs instead of Python dictionaries makes error recovery
easier, and allows for procedures to be cached based on their OIDs,
not their names. It also allows getting rid of the PyCObject field
that used to hold a pointer to PLyProcedure, since PyCObjects are
deprecated in Python 2.7 and replaced by Capsules in Python 3.
Jan Urbański
If the slice to be assigned to was before the existing array lower bound
(requiring at least one null element to spring into existence to fill the
gap), the code miscalculated how many entries needed to be copied from
the old array's null bitmap. This could result in trashing the array's
data area (as seen in bug #5840 from Karsten Loesing), or worse.
This has been broken since we first allowed the behavior of assigning to
non-adjacent slices, in 8.2. Back-patch to all affected versions.
Otherwise WAL recovery will replay the un-flushed WAL after walreceiver has
exited, which can lead to a non-recoverable standby if the system crashes hard
at that point.
This closes a race condition where if a tablespace was created
after the enumeration happened but before the do_pg_start_backup()
was called, the backup would be incomplete. Now that it's done
while we are in backup mode, WAL replay will recreate it during
restore.
Noted by Heikki.
backend, as far as the postmaster shutdown logic is concerned. That means,
fast shutdown will wait for WAL sender processes to exit before signaling
bgwriter to finish. This avoids race conditions between a base backup stopping
or starting, and bgwriter writing the shutdown checkpoint WAL record. We don't
want e.g the end-of-backup WAL record to be written after the shutdown
checkpoint.
Makes it easier to parse mainly the BASE_BACKUP command
with it's options, and avoids having to manually deal
with quoted identifiers in the label (previously broken),
and makes it easier to add new commands and options in
the future.
In passing, refactor the case statement in the walsender
to put each command in it's own function.
When the exit waits until the whole backup completes, it may take
a very long time.
In passing, add back an error check in the main loop so we detect
clients that disconnect much earlier if the backup is large.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
This reverts commit d1001a78ce of 2010-12-05,
which was broken as reported by Jeff Davis. The problem is that the
individual planning steps may have side-effects on substructures of
PlannerGlobal, not only the current PlannerInfo root. Arranging to keep
all such side effects in the main planning context is probably possible,
but it would change this from a quick local hack into a wide-ranging and
rather fragile endeavor. Which it's not worth.
that can be read without blocking. It used to conclude that there isn't, even
though there was data in the socket receive buffer. That lead walreceiver to
flush the WAL after every received chunk, potentially causing big performance
issues.
Backpatch to 9.0, because the performance impact can be very significant.
Changing a file two directory levels deep under src/backend/ would not
cause the postgres binary to be rebuilt. This change fixes it, but no
one knows why.
Instead, run them in the encoding that the locale selects, which is
more representative of real use.
Also document how locale and encoding for regression test runs can be
selected.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
Andrew Dunstan
Tom Lane
Magnus Hagander
Robert Haas
Heikki Linnakangas
Peter Eisentraut
Bruce Momjian
Alvaro Herrera