per gripe from Csaba Nagy. There is still potential for platform-specific
behavior for values that are exactly halfway between integers, but at
least we now get the expected answer for all other cases.
causes interval rounding not to work as expected in 7.3, for example
SELECT '18:17:15.6'::interval(0) does not round the value.
I did not force initdb, but one is needed to install the added row.
believe I didn't notice this before -- once 64k was sent to/from the
server the client would crash. Basicly, in 7.3 the server SSL code set
the initial state to "about to renegotiate" without actually starting
the renegotiation. In addition, the server and client didn't properly
handle the SSL_ERROR_WANT_(READ|WRITE) error. This is fixed in the
second patch.
Nathan Mueller
first, that I missed when checking over 7.3.1, was that the client
method was switched to SSLv23 along with the server. The SSLv23 client
method does SSLv2 by default, but can also understand SSLv3. In our
situation the SSLv2 backwords compatibility is really only needed on the
server. This is the first patch.
The last thing is that I found a way for the server to understand SSLv2
HELLO messages (sent by pre-7.3 clients) but then get them to talk
SSLv3. This is the last one.
Nathan Mueller
> The big problem is that while pg_dump's dump_trigger() looks at
> tginitdeferred and dumps accordingly, pg_get_constraintdef doesn't look
> at tginitdeferred, and therefore doesn't record the requirement as part
> of ALTER TABLE ADD CONSTRAINT.
pg_get_constraintdef should probably be looking at condeferrable and
condeferred in the pg_constraint row it's looking at. Maybe something
like the attached.
(Added, output only non-default values.)
Stephan Szabo
proposal on -hackers a couple days ago. The 'tgenabled' status of the
trigger is consulted when the trigger is added to the deferred queue
(i.e. when the event occurs that fires the trigger), not when the
deferred event is executed.
No regression tests, as another bug prevents them (the pg_trigger row
for a trigger is only loaded once per session, so any changes to it are
not noticed unless the client disconnects and reconnects).
Neil Conway
the index AM when we know we are fetching a unique row. However, this
logic did not consider the possibility that it would be asked to fetch
backwards. Also fix mark/restore to work correctly in this scenario.
previously determined not to be the last segment of a relation.
This reduces the expected cost to one seek, rather than one seek per
segment. We can get away with this because truncation of a relation
will cause a relcache flush and so the md.c file descriptor will be
closed; when it is re-opened we will re-determine the last segment.
match parent table. This used to work, but was broken in 7.3 by
rearrangement of code that handles targetlist sorting. Add a regression
test to catch future breakage.
patches of 9-Dec (permissions fix) and 13-Dec (performance) as well as
a partial fix for locking issues: concurrent DROP COLUMN should not
create trouble anymore. But concurrent DROP TABLE is still a risk, and
there is no protection at all against creating a column of a domain while
we are altering the domain.
columns in DefineIndex. So, ALTER TABLE ... PRIMARY KEY will now
automatically add the NOT NULL constraint. It appeared the alter_table
regression test wanted this to occur, as after the change the regression
test better matched in inline 'fails'/'succeeds' comments.
Rod Taylor
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
computation: reduce the bucket number mod nbatch. This changes the
association between original bucket numbers and batches, but that
doesn't matter. Minor other cleanups in hashjoin code to help
centralize decisions.
Also, tweak -C option (emit CREATE DATABASE command) to emit encoding
name rather than encoding number, for consistency with pg_dumpall
and better cross-version portability.
"SSLv23_method(void), SSLv23_server_method(void), SSLv23_client_method(void)
A TLS/SSL connection established with these methods will understand the SSLv2,
SSLv3, and TLSv1 protocol. A client will send out SSLv2 client hello messages
and will indicate that it also understands SSLv3 and TLSv1. A server will
understand SSLv2, SSLv3, and TLSv1 client hello messages. This is the best
choice when compatibility is a concern."
This will maintain backwards compatibility for those us that don't use
TLS connections ...
allocation in best_inner_indexscan(). While at it, simplify GEQO's
interface to the main planner --- make_join_rel() offers exactly the
API it really wants, whereas calling make_rels_by_clause_joins() and
make_rels_by_clauseless_joins() required jumping through hoops.
Rewrite gimme_tree for clarity (sometimes iteration is much better than
recursion), and approximately halve GEQO's runtime by recognizing that
tours of the forms (a,b,c,d,...) and (b,a,c,d,...) are equivalent
because of symmetry in make_join_rel().
disallowed by CREATE TABLE (eg, pseudo-types); also disallow these types
from being introduced by the range-function syntax. While at it, allow
CREATE TABLE to create zero-column tables, per recent pghackers discussion.
I am back-patching this into 7.3 since failure to disallow pseudo-types
is arguably a security hole.
practice of evaluating MemSet's arguments multiple times, except for
the special case of newNode(), where we can assume the argument is
a constant sizeof() operator.
Also, add GetMemoryChunkContext() to mcxt.c's API, in preparation for
fixing recent GEQO breakage.
given any malloc block until something is first allocated in it; but
thereafter, MemoryContextReset won't release that first malloc block.
This preserves the quick-reset property of the original policy, without
forcing 8K to be allocated to every context whether any of it is ever
used or not. Also, remove some more no-longer-needed explicit freeing
during ExecEndPlan.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
failing to find pg_hba.conf should be a fatal error anyway, so I
increased the priority of the elog() from LOG to FATAL and refactored
the code a little bit.
Neil Conway
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
produce which output in the geometry test, even with the problem narrowed
down to only whether they print minus zero or not. Instead, use
pg_regress' locale-variant mechanism to automatically consider the test
to pass if it matches either supplied comparison file. geometry_1.out
replaces the former geometry-positive-zeros.out.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
completion. Note that it's based on 7.3 tarball, not CVS HEAD, or 7.3rel
branch. Damn, looking at CVS, this will patch into 7.3rel (just tested,
it does) probably collide with Rod Taylor's patch adding ALTER TRIGGER
stuff. O.K, second patch attached against HEAD - not tested, hand
merged.
Ross Reedstrom
>
> In pg.py the attributes of DB are defined as being the same as
> the attributes of the corresponding pgobject "db", using the following
...
> The problem is that the attributes of db (which are read only)
> are not static (they are actually function calls to PostgreSQL),
> especially "status" and "error", but those attributes are copied
> and this is done only once when initializing the DB object.
>
> So, in effect, only the attribute "db.error" of a DB instance
> will be updated, but not the attribute "error". Same with "status".
> Don't copy the (read only) attributes of the pgobject to the
> DB object, but only the methods, and all of them, like this:
>
> --------------- change in pg.py ------------------
> # Create convience methods, in a way that is still overridable.
> for e in self.db.__methods__:
> setattr(self, e, getattr(self.db, e))
> ----------------------------------------------------
>
> Furthermore, make an addition to the documentation of the
> DB wrapper class (i.e. in pygresql-pg-db.html):
> After the sentence "All pgobject methods are included in this class also."
> add the following sentence "The pgobject read-only attributes can be
> accessed py adding the prefix 'db.' to them."
Christoph Zwerschke
* Add schema, cast, and conversion backslash commands to psql
I had to create a new publically available function,
pg_conversion_is_visible, as it seemed to be missing from the catalogs.
This required me to do no small amount of hacking around in namespace.c
I have updated the \? help and sgml docs.
\dc - list conversions [PATTERN]
\dC - list casts
\dn list schemas
I didn't support patterns with casts as there's nothing obvious to match
against.
Catalog version incremented --- initdb required.
Christopher Kings-Lynne
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
documentation and regression test mods. It seemed small and unobtrusive enough
to not require a specific proposal on the hackers list -- but if not, let me
know and I'll make a pitch. Otherwise, if there are no objections please apply.
Joe Conway
postgresql version 7.3, but yea... this patch adds full IPv6
support to postgres. I've tested it out on 7.2.3 and has
been running perfectly stable.
CREDITS:
The KAME Project (Initial patch)
Nigel Kukard <nkukard@lbsd.net>
Johan Jordaan <johanj@lando.co.za>
=====================
I suggested an improvement of the inserttable in the PyGreSQL interface
already in January, but seemingly it was never implemented. I was told this
is the right place to get patches in for PyGreSQL, so I'm reposting my patch
here.
I consider the inserttable methode essential in populating the database
because of its benefits in performance compared to insert, so I think this
patch is quite essential. The attachment is an improved version of the
corresponding pg_inserttable function in pgmodule.c, which fixes the
following problems:
* The function raised exceptions because PyList_GetItem was used beyond the
size of the list. This was checked by comparing the result with NULL, but
the exception was not cleaned up, which could result in mysterious errors in
the following Python code. Instead of clearing the exception using
PyErr_Clear or something like that, I avoided throwing the exception at all
by at first requesting the size of the list. Using this opportunity, I also
checked the uniformity of the size of the rows passed in the lists/tuples.
The function also accepts (and silently ignores) empty lists and sublists.
* Python "None" values are now accepted and properly converted to PostgreSQL
NULL values
* The function now generates an error message in case of a line buffer
overflow
* It copes with tabulators, newlines and backslashes in strings now
* Rewrote the buffer filling code which should now run faster by avoiding
unnecessary string copy operations forth and back
Christoph Zwerschke
cleaning up locale names and nothing else. Since all the locale names
are in plain ASCII I think it will be safe to use ASCII-only lower-case
conversion.
Nicolai Tufar
problems that occur if sublink is referenced via a join alias variable.
Perhaps this can be improved later, but a simple and safe fix is needed
for 7.3.1.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
('SELECT expression') inline, like macros, during the constant-folding
phase of planning. The actual expansion is not difficult, but checking
that we're not changing the semantics of the call turns out to be more
subtle than one might think; in particular must pay attention to
permissions issues, strictness, and volatility.
well as function calls. This is needed for cases where the planner has
constant-folded or inlined the original function call. Possibly we should
back-patch this change into 7.3 branch as well.
and eliminate its manual pfree() calls. This solves the encoding-conversion
bug recently reported, and should be faster and more robust than the
original coding anyway. For example, we are no longer at risk if
datatype output routines leak memory or choose to return a constant string.
logic, dissuade planner from thinking that 'x IS DISTINCT FROM 42' may
be optimized into 'x = 42' (!!), cause dependency on = operator to be
recorded correctly, minor other improvements.
instead of only one. This should speed up planning (only one hash path
to consider for a given pair of relations) as well as allow more effective
hashing, when there are multiple hashable joinclauses.
operations: make sure we use operators that are compatible, as determined
by a mergejoin link in pg_operator. Also, add code to planner to ensure
we don't try to use hashed grouping when the grouping operators aren't
marked hashable.
sublink results and COPY's domain constraint checking. A Const that
isn't really constant is just a Bad Idea(tm). Remove hacks in
parse_coerce and other places that were needed because of the former
klugery.
just done for copyfuncs/equalfuncs. Read functions in particular get
a lot shorter than before, and it's much easier to compare an out function
with the corresponding read function to make sure they agree.
initdb forced due to small changes in nodestring format (regularizing
a few cases that were formerly idiosyncratic).
reliance on macros, in hopes of eliminating silly typos (like copying
to the wrong field) and just generally making it easier to see the forest
instead of the trees. As an example, here is the new code for A_Indices:
static A_Indices *
_copyAIndices(A_Indices *from)
{
A_Indices *newnode = makeNode(A_Indices);
COPY_NODE_FIELD(lidx);
COPY_NODE_FIELD(uidx);
return newnode;
}
static bool
_equalAIndices(A_Indices *a, A_Indices *b)
{
COMPARE_NODE_FIELD(lidx);
COMPARE_NODE_FIELD(uidx);
return true;
}
I plan to redo outfuncs/readfuncs in a similar style, but am committing
what I've got.
raises pgdb.DatabaseError when any of the fetch*
methods was invoked but previous call to execute* did
not produce any result set or no call was issued yet.
Also, raises pgdb.NotSupportedError when .nextset() is
invoked, instead of NameError.
This behaviour complies with DB-API 2.0.
Thanks for your work!
Timur Irmatov.
used for the primary key lookup. This will prevent a database lookup
for each connection object that gets created. This could be a significant
optimization on a busy system.
Similarly, the get_attnames method allows for the attributes dictionary
to be installed directly.
debug output is managed. The user can continue to use the current method
of passing a formatting string to have a replacement done and output will
be sent to the standard output exactly as it did before. In addition they
can set it to a file object, sys.stderr for example, and the query string
will be printed to it. Thay can also set it to a method (function) and the
query string will be passed to that method giving them the maximum flexibility
to do whatever they want with the query string.
I will be working with the PyGreSQL documentation shortly and at that time
will properly document this feature.
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
one more row from the subplan than the COUNT would appear to require.
This costs a little more logic but a number of people have complained
about the old implementation.
results due to doing arithmetic on uninitialized values. Add some
documentation about the AT TIME ZONE construct. Update some other
date/time documentation that seemed out of date for 7.3.
database access outside a transaction; revert bogus performance improvement
in SIBackendInit(); improve comments; add documentation (this part courtesy
Neil Conway).
parameter to allow it to be forced off for comparison purposes.
Add ORDER BY clauses to a bunch of regression test queries that will
otherwise produce randomly-ordered output in the new regime.
on a preparedStatement would reset the prepared statment causing subsequent
uses of the preparedStatement to fail (i.e. the following series of calls
would fail: addBatch() executeBatch() addBatch() executBatch()). This is
a regression from 7.2 where this worked correctly. The regression test has
also been modified to explicitly test for this case.
Modified Files:
jdbc/org/postgresql/jdbc1/AbstractJdbc1Statement.java
jdbc/org/postgresql/jdbc2/AbstractJdbc2Statement.java
jdbc/org/postgresql/test/jdbc2/BatchExecuteTest.java
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
"canceled", so I changed the one remaining usage of the British
spelling ("cancelled") over to the former, and updated the translation
files appropriately.
Neil Conway
The code was not making TupleConstr structs for such catalogs in
several places; with the consequence that the not-null constraint
wasn't actually enforced. With this change,
INSERT INTO pg_proc VALUES('sdf');
generates a 'Fail to add null value' error instead of a core dump.
- CLUSTER ALL clusters all the tables that have some index with
indisclustered set and the calling user owns.
- CLUSTER tablename clusters the named table, using the index with
indisclustered set. If no index has the bit set, throws elog(ERROR).
- The multi-relation version (CLUSTER ALL) uses a multitransaction
approach, similar to what VACUUM does.
Alvaro Herrera
Add simple ALTER DATABASE, ALTER TRIGGER, CHECK POINT, CREATE
CONVERSION, CREATE DOMAIN, CREATE LANGUAGE, DEALLOCATE, DROP CONVERSION,
DROP DOMAIN, DROP LANGUAGE, EXECUTE, PREPARE
Complete CAST in CREATE CAST and DROP CAST but doesn't suggest what
should follow.
Add many more SET / SHOW variables to the list. Taken from SHOW ALL
output.
Complete a case sensitive search to allow \dD, \dd, \dS, \ds, \h, \H to
complete properly. But there are no matches, then try a case
insensitive search to allow case conversion. Add all missing help
options.
\Q<tab> -> \q
\dD<tab> -> \dD
\dd<tab> -> \dd
\D<tab><tab><tab> -> \d (with listing of \d? commands)
sel<tab> -> SELECT
Rod Taylor
