In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Discussion: https://postgr.es/m/6629.1523294509@sss.pgh.pa.us
This reverts the backend sides of commit 1fde38beaa.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
This makes it possible to turn checksums on in a live cluster, without
the previous need for dump/reload or logical replication (and to turn it
off).
Enabling checkusm starts a background process in the form of a
launcher/worker combination that goes through the entire database and
recalculates checksums on each and every page. Only when all pages have
been checksummed are they fully enabled in the cluster. Any failure of
the process will revert to checksums off and the process has to be
started.
This adds a new WAL record that indicates the state of checksums, so
the process works across replicated clusters.
Authors: Magnus Hagander and Daniel Gustafsson
Review: Tomas Vondra, Michael Banck, Heikki Linnakangas, Andrey Borodin
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
In the previous coding, skipped pages were mostly zeroes, but they still
had valid WAL page headers. That makes them very much less compressible
than an unbroken string of zeroes would be --- about 10X worse for bzip2
compression, for instance. We don't need those headers, so tweak the logic
so that we zero them out.
Chapman Flack, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/579297F8.7020107@anastigmatix.net
Store GID of 2PC in commit/abort WAL records when wal_level = logical.
This allows logical decoding to send the SAME gid to subscribers
across restarts of logical replication.
Track relica origin replay progress for 2PC.
(Edited from patch 0003 in the logical decoding 2PC series.)
Authors: Nikhil Sontakke, Stas Kelvich
Reviewed-by: Simon Riggs, Andres Freund
Originally, we treated memory context names as potentially variable in
all cases, and therefore always copied them into the context header.
Commit 9fa6f00b1 rethought this a little bit and invented a distinction
between fixed and variable names, skipping the copy step for the former.
But we can make things both simpler and more useful by instead allowing
there to be two parts to a context's identification, a fixed "name" and
an optional, variable "ident". The name supplied in the context create
call is now required to be a compile-time-constant string in all cases,
as it is never copied but just pointed to. The "ident" string, if
wanted, is supplied later. This is needed because typically we want
the ident to be stored inside the context so that it's cleaned up
automatically on context deletion; that means it has to be copied into
the context before we can set the pointer.
The cost of this approach is basically just an additional pointer field
in struct MemoryContextData, which isn't much overhead, and is bought
back entirely in the AllocSet case by not needing a headerSize field
anymore, since we no longer have to cope with variable header length.
In addition, we can simplify the internal interfaces for memory context
creation still further, saving a few cycles there. And it's no longer
true that a custom identifier disqualifies a context from participating
in aset.c's freelist scheme, so possibly there's some win on that end.
All the places that were using non-compile-time-constant context names
are adjusted to put the variable info into the "ident" instead. This
allows more effective identification of those contexts in many cases;
for example, subsidary contexts of relcache entries are now identified
by both type (e.g. "index info") and relname, where before you got only
one or the other. Contexts associated with PL function cache entries
are now identified more fully and uniformly, too.
I also arranged for plancache contexts to use the query source string
as their identifier. This is basically free for CachedPlanSources, as
they contained a copy of that string already. We pay an extra pstrdup
to do it for CachedPlans. That could perhaps be avoided, but it would
make things more fragile (since the CachedPlanSource is sometimes
destroyed first). I suspect future improvements in error reporting will
require CachedPlans to have a copy of that string anyway, so it's not
clear that it's worth moving mountains to avoid it now.
This also changes the APIs for context statistics routines so that the
context-specific routines no longer assume that output goes straight
to stderr, nor do they know all details of the output format. This
is useful immediately to reduce code duplication, and it also allows
for external code to do something with stats output that's different
from printing to stderr.
The reason for pushing this now rather than waiting for v12 is that
it rethinks some of the API changes made by commit 9fa6f00b1. Seems
better for extension authors to endure just one round of API changes
not two.
Discussion: https://postgr.es/m/CAB=Je-FdtmFZ9y9REHD7VsSrnCkiBhsA4mdsLKSPauwXtQBeNA@mail.gmail.com
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
In some cases, these were different for no apparent reason, making
debugging unnecessarily mysterious.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
All of these are false positives, but in each case a fair amount of
analysis is needed to see that, and it's not too surprising that not all
compilers are smart enough. (In particular, in the logtape.c case, a
compiler lacking the knowledge provided by the Assert would almost surely
complain, so that this warning will be seen in any non-assert build.)
Some of these are of long standing while others are pretty recent,
but it only seems worth fixing them in HEAD.
Jaime Casanova, tweaked a bit by me
Discussion: https://postgr.es/m/CAJGNTeMcYAMJdPAom52dppLMtF-UnEZi0dooj==75OEv1EoBZA@mail.gmail.com
Commit 445dbd82a basically missed the point of commit d46633506,
which was that we shouldn't allow shm_toc_lookup() failure to lead
to a core dump or assertion crash, because the odds of such a
failure should never be considered negligible. It's correct that
we can't expect the PARALLEL_KEY_ERROR_QUEUE TOC entry to be there
if we have no workers. But if we have no workers, we're not going
to do anything in this function with the lookup result anyway,
so let's just skip it. That lets the code use the easy-to-prove-safe
noError=false case, rather than anything requiring effort to review.
Back-patch to v10, like the previous commit.
Discussion: https://postgr.es/m/3647.1517601675@sss.pgh.pa.us
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Once this function has been called, we know that all workers have
started and attached to their error queues -- so if any of them
subsequently exit uncleanly, we'll be sure to throw an ERROR promptly.
Otherwise, users of the ParallelContext machinery must be careful not
to wait forever for a worker that has failed to start. Parallel query
manages to work without needing this for reasons explained in new
comments added by this patch, but it's a useful primitive for other
parallel operations, such as the pending patch to make creating a
btree index run in parallel.
Amit Kapila, revised by me. Additional review by Peter Geoghegan.
Discussion: http://postgr.es/m/CAA4eK1+e2MzyouF5bg=OtyhDSX+=Ao=3htN=T-r_6s3gCtKFiw@mail.gmail.com
Since 9.6, heavyweight locking is not an abstract and unhandled
concern of the parallel machinery, but rather something to which
we have a specific approach.
Commit 28724fd90d fixed things so that
if a background worker fails to start due to fork() failure or because
it is terminated before startup succeeds, BGWH_STOPPED will be
reported. However, that only helps if the code that uses the
background worker machinery notices the change in status, and the code
in parallel.c did not.
To fix that, do two things. First, make sure that when a worker
exits, it triggers the leader to read from error queues. That way, if
a worker which has attached to an error queue exits uncleanly, the
leader is sure to throw some error, either the contents of the
ErrorResponse sent by the worker, or "lost connection to parallel
worker" if it exited without sending one. To cover the case where
the worker never starts up in the first place or exits before
attaching to the error queue, the ParallelContext now keeps track
of which workers have sent at least one message via the error
queue. A worker which sends no messages by the time the parallel
operation finishes will be checked to see whether it exited before
attaching to the error queue; if so, a new error message, "parallel
worker failed to initialize", will be reported. If not, we'll
continue to wait until it either starts up and exits cleanly, starts
up and exits uncleanly, or fails to start, and then take the
appropriate action.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYnBgXgdTu6wk5YPdWhmgabYc9nY_pFLq=tB=FSLYkD8Q@mail.gmail.com
currentCommandIdUsed is only used to skip redundant increments of the
command counter, and CommandCounterIncrement() is categorically denied
under parallelism anyway. Therefore, it's OK for
GetCurrentCommandId() to mark the counter value used, as long as it
happens in the leader, not a worker.
Prior to commit e9baa5e9fa, the slightly
incorrect check didn't matter, but now it does. A test case added by
commit 1804284042 uncovered the problem
by accident; it caused failures with force_parallel_mode=on/regress.
Report and review by Andres Freund. Patch by me.
Discussion: http://postgr.es/m/20171221143106.5lhtygohvmazli3x@alap3.anarazel.de
Generally, error recovery paths that need to do things like
LWLockReleaseAll and pgstat_report_wait_end also need to call
ConditionVariableCancelSleep, but AbortSubTransaction was missed.
Since subtransaction abort might destroy up the DSM segment that
contains the ConditionVariable stored in cv_sleep_target, this
can result in a crash for anything using condition variables.
Reported and diagnosed by Andres Freund.
Discussion: http://postgr.es/m/20171221110048.rxk6464azzl5t2fi@alap3.anarazel.de
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
This patch makes a number of interrelated changes to reduce the overhead
involved in creating/deleting memory contexts. The key ideas are:
* Include the AllocSetContext header of an aset.c context in its first
malloc request, rather than allocating it separately in TopMemoryContext.
This means that we now always create an initial or "keeper" block in an
aset, even if it never receives any allocation requests.
* Create freelists in which we can save and recycle recently-destroyed
asets (this idea is due to Robert Haas).
* In the common case where the name of a context is a constant string,
just store a pointer to it in the context header, rather than copying
the string.
The first change eliminates a palloc/pfree cycle per context, and
also avoids bloat in TopMemoryContext, at the price that creating
a context now involves a malloc/free cycle even if the context never
receives any allocations. That would be a loser for some common
usage patterns, but recycling short-lived contexts via the freelist
eliminates that pain.
Avoiding copying constant strings not only saves strlen() and strcpy()
overhead, but is an essential part of the freelist optimization because
it makes the context header size constant. Currently we make no
attempt to use the freelist for contexts with non-constant names.
(Perhaps someday we'll need to think harder about that, but in current
usage, most contexts with custom names are long-lived anyway.)
The freelist management in this initial commit is pretty simplistic,
and we might want to refine it later --- but in common workloads that
will never matter because the freelists will never get full anyway.
To create a context with a non-constant name, one is now required to
call AllocSetContextCreateExtended and specify the MEMCONTEXT_COPY_NAME
option. AllocSetContextCreate becomes a wrapper macro, and it includes
a test that will complain about non-string-literal context name
parameters on gcc and similar compilers.
An unfortunate side effect of making AllocSetContextCreate a macro is
that one is now *required* to use the size parameter abstraction macros
(ALLOCSET_DEFAULT_SIZES and friends) with it; the pre-9.6 habit of
writing out individual size parameters no longer works unless you
switch to AllocSetContextCreateExtended.
Internally to the memory-context-related modules, the context creation
APIs are simplified, removing the rather baroque original design whereby
a context-type module called mcxt.c which then called back into the
context-type module. That saved a bit of code duplication, but not much,
and it prevented context-type modules from exercising control over the
allocation of context headers.
In passing, I converted the test-and-elog validation of aset size
parameters into Asserts to save a few more cycles. The original thought
was that callers might compute size parameters on the fly, but in practice
nobody does that, so it's useless to expend cycles on checking those
numbers in production builds.
Also, mark the memory context method-pointer structs "const",
just for cleanliness.
Discussion: https://postgr.es/m/2264.1512870796@sss.pgh.pa.us
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
Commit d466335064 changed things so
that shm_toc_lookup would fail with an error rather than silently
returning NULL in the hope that such failures would be reported
in a useful way rather than via a system crash. However, it
overlooked the fact that the lookup of PARALLEL_KEY_ERROR_QUEUE
in ReinitializeParallelDSM is expected to fail when no DSM segment
was created in the first place; in that case, we end up with a
backend-private memory segment that still contains an entry for
PARALLEL_KEY_FIXED but no others. Consequently a benign failure
to initialize parallelism can escalate into an elog(ERROR);
repair.
Discussion: http://postgr.es/m/CA+Tgmob8LFw55DzH1QEREpBEA9RJ_W_amhBFCVZ6WMwUhVpOqg@mail.gmail.com
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog backup block seen so far. We now MAXALIGN the palloc size.
The original coding could result in many repeated palloc cycles, in the
worst case where we see a series ofgradually larger xlog records. We
ameliorate that similarly to 8735978e7a
by imposing a minimum buffer size of BLCKSZ.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog record seen so far. It turns out that that can result in
valgrind complaints, because some compilers will emit code that assumes
it can safely fetch padding bytes at the end of a struct, and those
padding bytes were unallocated so far as aset.c was concerned. We can
fix that by MAXALIGN'ing the palloc request size, ensuring that it is big
enough to include any possible padding that might've been omitted from
the on-disk record.
An additional objection to the original coding is that it could result in
many repeated palloc cycles, in the worst case where we see a series of
gradually larger xlog records. We can ameliorate that cheaply by
imposing a minimum buffer size that's large enough for most xlog records.
BLCKSZ/2 was chosen after a bit of discussion.
In passing, remove an obsolete comment in struct xl_heap_new_cid that the
combocid field is free due to alignment considerations. Perhaps that was
true at some point, but it's not now.
Back-patch to 9.5 where this code came in.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Previously server reserved WAL for last two checkpoints,
which used too much disk space for small servers.
Bumps PG_CONTROL_VERSION
Author: Simon Riggs <simon@2ndQuadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Without this fix, dropping a role can sometimes result in parallel
query failures in sessions that have used "SET ROLE" to assume the
dropped role, even if that setting isn't active any more.
Report by Pavan Deolasee. Patch by Amit Kapila, reviewed by me.
Discussion: http://postgr.es/m/CABOikdOomRcZsLsLK+Z+qENM1zxyaWnAvFh3MJZzZnnKiF+REg@mail.gmail.com
resowner/README contained advice to use a PG_TRY block to restore the
old CurrentResourceOwner value anywhere that that variable is transiently
changed. That advice was only inconsistently followed, however, and
on reflection it seems like unnecessary overhead. We don't bother
with such a convention for transient CurrentMemoryContext changes,
on the grounds that any (sub)transaction abort will start out by
resetting CurrentMemoryContext to what it wants. But the same is
true of CurrentResourceOwner, so there seems no need to treat it
differently.
Hence, remove PG_TRY blocks that exist only to restore CurrentResourceOwner
before re-throwing the error. There are a couple of places that restore
it along with some other actions, and I left those alone; the restore is
probably unnecessary but no noticeable gain will result from removing it.
Discussion: https://postgr.es/m/5236.1507583529@sss.pgh.pa.us
Sloppy loop coding in set_status_by_pages() resulted in fetching one array
element more than it should from the subxids[] array. The odds of this
resulting in SIGSEGV are pretty small, but we've certainly seen that happen
with similar mistakes elsewhere. While at it, we can get rid of an extra
TransactionIdToPage() calculation per loop.
Per report from David Binderman. Back-patch to all supported branches,
since this code is quite old.
Discussion: https://postgr.es/m/HE1PR0802MB2331CBA919CBFFF0C465EB429C710@HE1PR0802MB2331.eurprd08.prod.outlook.com
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
The bug was caused by not re-reading the control file during crash
recovery restarts, which lead to an attempt to pfree() shared memory
contents. The fix is to re-read the control file, which seems good
anyway.
It's unclear as of this moment, whether we want to keep the
refactoring introduced in the commit referenced above, or come up with
an alternative approach. But fixing the bug in the mean time seems
like a good idea regardless.
A followup commit will introduce regression test coverage for crash
restarts.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/14134.1505572349@sss.pgh.pa.us
Tuples can have type RECORDOID and a typmod number that identifies a blessed
TupleDesc in a backend-private cache. To support the sharing of such tuples
through shared memory and temporary files, provide a typmod registry in
shared memory.
To achieve that, introduce per-session DSM segments, created on demand when a
backend first runs a parallel query. The per-session DSM segment has a
table-of-contents just like the per-query DSM segment, and initially the
contents are a shared record typmod registry and a DSA area to provide the
space it needs to grow.
State relating to the current session is accessed via a Session object
reached through global variable CurrentSession that may require significant
redesign further down the road as we figure out what else needs to be shared
or remodelled.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Previously we read the control file in multiple places. But soon the
segment size will be configurable and stored in the control file, and
that needs to be available earlier than it currently is needed.
Instead of adding yet another place where it's read, refactor things
so there's a single processing of the control file during startup (in
EXEC_BACKEND that's every individual backend's startup).
Author: Andres Freund
Discussion: http://postgr.es/m/20170913092828.aozd3gvvmw67gmyc@alap3.anarazel.de
It is equivalent in ANSI C to write (*funcptr) () and funcptr(). These
two styles have been applied inconsistently. After discussion, we'll
use the more verbose style for plain function pointer variables, to make
it clear that it's a variable, and the shorter style when the function
pointer is in a struct (s.func() or s->func()), because then it's clear
that it's not a plain function name, and otherwise the excessive
punctuation makes some of those invocations hard to read.
Discussion: https://www.postgresql.org/message-id/f52c16db-14ed-757d-4b48-7ef360b1631d@2ndquadrant.com
Issuing a savepoint-related command in a Query message that contains
multiple SQL statements led to a FATAL exit with a complaint about
"unexpected state STARTED". This is a shortcoming of commit 4f896dac1,
which attempted to prevent such misbehaviors in multi-statement strings;
its quick hack of marking the individual statements as "not top-level"
does the wrong thing in this case, and isn't a very accurate description
of the situation anyway.
To fix, let's introduce into xact.c an explicit model of what happens for
multi-statement Query strings. This is an "implicit transaction block
in progress" state, which for many purposes works like the normal
TBLOCK_INPROGRESS state --- in particular, IsTransactionBlock returns true,
causing the desired result that PreventTransactionChain will throw error.
But in case of error abort it works like TBLOCK_STARTED, allowing the
transaction to be cancelled without need for an explicit ROLLBACK command.
Commit 4f896dac1 is reverted in toto, so that we go back to treating the
individual statements as "top level". We could have left it as-is, but
this allows sharpening the error message for PreventTransactionChain
calls inside functions.
Except for getting a normal error instead of a FATAL exit for savepoint
commands, this patch should result in no user-visible behavioral change
(other than that one error message rewording). There are some things
we might want to do in the line of changing the appearance or wording of
error and warning messages around this behavior, which would be much
simpler to do now that it's an explicitly modeled state. But I haven't
done them here.
Although this fixes a long-standing bug, no backpatch. The consequences
of the bug don't seem severe enough to justify the risk that this commit
itself creates some new issue.
Patch by me, but it owes something to previous investigation by
Takayuki Tsunakawa, who also reported the bug in the first place.
Also thanks to Michael Paquier for reviewing.
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F6BE40D@G01JPEXMBYT05
Commit 0e141c0fbb introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. A previous attempt to introduce a similar
mechanism for CLogControlLock in ccce90b398
crashed and burned, but the design problem which resulted in those
failures is believed to have been corrected in this version.
Amit Kapila, with some cosmetic changes by me. See the previous commit
message for additional credits.
Discussion: http://postgr.es/m/CAA4eK1KudxzgWhuywY_X=yeSAhJMT4DwCjroV5Ay60xaeB2Eew@mail.gmail.com
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
Stress testing by Andreas Seltenreich disclosed longstanding problems that
occur if a FATAL exit (e.g. due to receipt of SIGTERM) occurs while we are
trying to execute a ROLLBACK of an already-failed transaction. In such a
case, xact.c is in TBLOCK_ABORT state, so that AbortOutOfAnyTransaction
would skip AbortTransaction and go straight to CleanupTransaction. This
led to an assert failure in an assert-enabled build (due to the ROLLBACK's
portal still having a cleanup hook) or without assertions, to a FATAL exit
complaining about "cannot drop active portal". The latter's not
disastrous, perhaps, but it's messy enough to want to improve it.
We don't really want to run all of AbortTransaction in this code path.
The minimum required to clean up the open portal safely is to do
AtAbort_Memory and AtAbort_Portals. It seems like a good idea to
do AtAbort_Memory unconditionally, to be entirely sure that we are
starting with a safe CurrentMemoryContext. That means that if the
main loop in AbortOutOfAnyTransaction does nothing, we need an extra
step at the bottom to restore CurrentMemoryContext = TopMemoryContext,
which I chose to do by invoking AtCleanup_Memory. This'll result in
calling AtCleanup_Memory twice in many of the paths through this function,
but that seems harmless and reasonably inexpensive.
The original motivation for the assertion in AtCleanup_Portals was that
we wanted to be sure that any user-defined code executed as a consequence
of the cleanup hook runs during AbortTransaction not CleanupTransaction.
That still seems like a valid concern, and now that we've seen one case
of the assertion firing --- which means that exactly that would have
happened in a production build --- let's replace the Assert with a runtime
check. If we see the cleanup hook still set, we'll emit a WARNING and
just drop the hook unexecuted.
This has been like this a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/877ey7bmun.fsf@ansel.ydns.eu
The sole useful effect of this function, to check that no catcache
entries have positive refcounts at transaction end, has really been
obsolete since we introduced ResourceOwners in PG 8.1. We reduced the
checks to assertions years ago, so that the function was a complete
no-op in production builds. There have been previous discussions about
removing it entirely, but consensus up to now was that it had some small
value as a cross-check for bugs in the ResourceOwner logic.
However, it now emerges that it's possible to trigger these assertions
if you hit an assert-enabled backend with SIGTERM during a call to
SearchCatCacheList, because that function temporarily increases the
refcounts of entries it's intending to add to a catcache list construct.
In a normal ERROR scenario, the extra refcounts are cleaned up by
SearchCatCacheList's PG_CATCH block; but in a FATAL exit we do a
transaction abort and exit without ever executing PG_CATCH handlers.
There's a case to be made that this is a generic hazard and we should
consider restructuring elog(FATAL) handling so that pending PG_CATCH
handlers do get run. That's pretty scary though: it could easily create
more problems than it solves. Preliminary stress testing by Andreas
Seltenreich suggests that there are not many live problems of this ilk,
so we rejected that idea.
There are more-localized ways to fix the problem; the most principled
one would be to use PG_ENSURE_ERROR_CLEANUP instead of plain PG_TRY.
But adding cycles to SearchCatCacheList isn't very appealing. We could
also weaken the assertions in AtEOXact_CatCache in some more or less
ad-hoc way, but that just makes its raison d'etre even less compelling.
In the end, the most reasonable solution seems to be to just remove
AtEOXact_CatCache altogether, on the grounds that it's not worth trying
to fix it. It hasn't found any bugs for us in many years.
Per report from Jeevan Chalke. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAM2+6=VEE30YtRQCZX7_sCFsEpoUkFBV1gZazL70fqLn8rcvBA@mail.gmail.com
We must advance the oldest XID that can be safely looked up in clog
*before* truncating CLOG, and the oldest XID that can't be reused
*after* truncating CLOG. This assertion, and the accompanying
comment, are confused; remove them.
Reported by Neha Sharma.
Discussion: http://postgr.es/m/CANiYTQumC3T=UMBMd1Hor=5XWZYuCEQBioL3ug0YtNQCMMT5wQ@mail.gmail.com
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
SLRU buffer lwlocks are allocated twice by oversight in commit
fe702a7b3f where that locks were moved to
separate tranche. The bug doesn't have user-visible effects except small
overspending of shared memory.
Backpatch to 9.6 where it was introduced.
Alexander Korotkov with small editorization by me.
When pg_control was first designed, sizeof(ControlFileData) was small
enough that a comment seemed like plenty to document the assumption that
it'd fit into one disk sector. Now it's nearly 300 bytes, raising the
possibility that somebody would carelessly add enough stuff to create
a problem. Let's add a StaticAssertStmt() to ensure that the situation
doesn't pass unnoticed if it ever occurs.
While at it, rename PG_CONTROL_SIZE to PG_CONTROL_FILE_SIZE to make it
clearer what that symbol means, and convert the existing runtime
comparisons of sizeof(ControlFileData) vs. PG_CONTROL_FILE_SIZE to be
static asserts --- we didn't have that technology when this code was
first written.
Discussion: https://postgr.es/m/9192.1500490591@sss.pgh.pa.us
When promoting a standby just after a XLOG_SWITCH record was replayed,
and next segment(s) are already are locally available (via walsender,
restore_command + trigger/recovery target), that segment could
accidentally be recycled onto the past of the new timeline. Later
checkpointer would create a .ready file for it, assuming there was an
error during creation, and it would get archived. That causes trouble
if another standby is later brought up from a basebackup from before
the timeline creation, because it would try to read the
segment, because XLogFileReadAnyTLI just tries all possible timelines,
which doesn't have valid contents. Thus replay would fail.
The problem, if already occurred, can be fixed by removing the segment
and/or having restore_command filter it out.
The reason for the creation of such "phantom" segments was, that after
an XLOG_SWITCH record the EndOfLog variable points to the beginning of
the next segment, and RemoveXlogFile() used XLByteToPrevSeg().
Normally RemoveXlogFile() doing so is harmless, because the last
segment will still exist preventing InstallXLogFileSegment() from
causing harm, but just after promotion there's no previous segment on
the new timeline.
Fix that by using XLByteToSeg() instead of XLByteToPrevSeg().
Author: Andres Freund
Reported-By: Greg Burek
Discussion: https://postgr.es/m/20170619073026.zcwpe6mydsaz5ygd@alap3.anarazel.de
Backpatch: 9.2-, bug older than all supported versions
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The optimized code in 728bd991c3 contains a few invalid locking
sequences. To wit, the original code would try to acquire an lwlock
that it already holds. Avoid this by moving lock acquisitions to
higher-level code, and install appropriate assertions in low-level that
the correct mode is held.
Authors: Michael Paquier, Álvaro Herrera
Reported-By: chuanting wang
Bug: #14680
Discussion: https://postgr.es/m/20170531033228.1487.10124@wrigleys.postgresql.org
The larger part of this patch replaces usages of MyProc->procLatch
with MyLatch. The latter works even early during backend startup,
where MyProc->procLatch doesn't yet. While the affected code
shouldn't run in cases where it's not initialized, it might get copied
into places where it might. Using MyLatch is simpler and a bit faster
to boot, so there's little point to stick with the previous coding.
While doing so I noticed some weaknesses around newly introduced uses
of latches that could lead to missed events, and an omitted
CHECK_FOR_INTERRUPTS() call in worker_spi.
As all the actual bugs are in v10 code, there doesn't seem to be
sufficient reason to backpatch this.
Author: Andres Freund
Discussion:
https://postgr.es/m/20170606195321.sjmenrfgl2nu6j63@alap3.anarazel.dehttps://postgr.es/m/20170606210405.sim3yl6vpudhmufo@alap3.anarazel.de
Backpatch: -
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and
throws a PANIC if so. At that point, only walsenders are still
active, so one might think this could not happen, but walsenders can
also generate WAL, for instance in BASE_BACKUP and logical decoding
related commands (e.g. via hint bits). So they can trigger this panic
if such a command is run while the shutdown checkpoint is being
written.
To fix this, divide the walsender shutdown into two phases. First,
checkpointer, itself triggered by postmaster, sends a
PROCSIG_WALSND_INIT_STOPPING signal to all walsenders. If the backend
is idle or runs an SQL query this causes the backend to shutdown, if
logical replication is in progress all existing WAL records are
processed followed by a shutdown. Otherwise this causes the walsender
to switch to the "stopping" state. In this state, the walsender will
reject any further replication commands. The checkpointer begins the
shutdown checkpoint once all walsenders are confirmed as
stopping. When the shutdown checkpoint finishes, the postmaster sends
us SIGUSR2. This instructs walsender to send any outstanding WAL,
including the shutdown checkpoint record, wait for it to be replicated
to the standby, and then exit.
Author: Andres Freund, based on an earlier patch by Michael Paquier
Reported-By: Fujii Masao, Andres Freund
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Backpatch: 9.4, where logical decoding was introduced
This reverts commit 086221cf6b, which
was made to master only.
The approach implemented in the above commit has some issues. While
those could easily be fixed incrementally, doing so would make
backpatching considerably harder, so instead first revert this patch.
Discussion: https://postgr.es/m/20170602002912.tqlwn4gymzlxpvs2@alap3.anarazel.de
Given the possibility of race conditions and so on, it seems entirely
unsafe to just assume that shm_toc_lookup() always finds the key it's
looking for --- but that was exactly what all but one call site were
doing. To fix, add a "bool noError" argument, similarly to what we
have in many other functions, and throw an error on an unexpected
lookup failure. Remove now-redundant Asserts that a rather random
subset of call sites had.
I doubt this will throw any light on buildfarm member lorikeet's
recent failures, because if an unnoticed lookup failure were involved,
you'd kind of expect a null-pointer-dereference crash rather than the
observed symptom. But you never know ... and this is better coding
practice even if it never catches anything.
Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
When the checkpointer writes the shutdown checkpoint, it checks
afterwards whether any WAL has been written since it started and throws
a PANIC if so. At that point, only walsenders are still active, so one
might think this could not happen, but walsenders can also generate WAL,
for instance in BASE_BACKUP and certain variants of
CREATE_REPLICATION_SLOT. So they can trigger this panic if such a
command is run while the shutdown checkpoint is being written.
To fix this, divide the walsender shutdown into two phases. First, the
postmaster sends a SIGUSR2 signal to all walsenders. The walsenders
then put themselves into the "stopping" state. In this state, they
reject any new commands. (For simplicity, we reject all new commands,
so that in the future we do not have to track meticulously which
commands might generate WAL.) The checkpointer waits for all walsenders
to reach this state before proceeding with the shutdown checkpoint.
After the shutdown checkpoint is done, the postmaster sends
SIGINT (previously unused) to the walsenders. This triggers the
existing shutdown behavior of sending out the shutdown checkpoint record
and then terminating.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
After the logical replication launcher was told to wake up at
commit (for example, by a CREATE SUBSCRIPTION command), the flag to wake
up was not reset, so it would be woken up at every following commit as
well. So fix that by resetting the flag.
Also, we don't need to wake up anything if the transaction was rolled
back. Just reset the flag in that case.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-by: Fujii Masao <masao.fujii@gmail.com>
ProcessTwoPhaseBuffer (formerly StandbyRecoverPreparedTransactions)
mixed up the parent and child XIDs when calling SubTransSetParent to
record the transactions' relationship in pg_subtrans.
Remarkably, analysis by Simon Riggs suggests that this doesn't lead to
visible problems (at least, not in non-Assert builds). That might
explain why we'd not noticed it before. Nonetheless, it's surely wrong.
This code was born broken, so back-patch to all supported branches.
Discussion: https://postgr.es/m/20110.1492905318@sss.pgh.pa.us
Doing so allows various crash possibilities. Fix by avoiding
having PrescanPreparedTransactions() increment
ShmemVariableCache->nextXid when it has no 2PC files
Bug found by Jeff Janes, diagnosis and patch by Pavan Deolasee,
then patch re-designed for clarity and full accuracy by
Michael Paquier.
Reported-by: Jeff Janes
Author: Pavan Deolasee, Michael Paquier
Discussion: https://postgr.es/m/CAMkU=1zMLnH_i1-PVQ-biZzvNx7VcuatriquEnh7HNk6K8Ss3Q@mail.gmail.com
Coverity complained because bgw.bgw_extra wasn't being filled in by
ApplyLauncherRegister(). The most future-proof fix is to memset the
whole BackgroundWorker struct to zeroes. While at it, let's apply the
same coding rule to other places that set up BackgroundWorker structs;
four out of five had the same or related issues.
We'd already recognized that we can't pass function pointers across process
boundaries for functions in loadable modules, since a shared library could
get loaded at different addresses in different processes. But actually the
practice doesn't work for functions in the core backend either, if we're
using EXEC_BACKEND. This is the cause of recent failures on buildfarm
member culicidae. Switch to passing a string function name in all cases.
Something like this needs to be back-patched into 9.6, but let's see
if the buildfarm likes it first.
Petr Jelinek, with a bunch of basically-cosmetic adjustments by me
Discussion: https://postgr.es/m/548f9c1d-eafa-e3fa-9da8-f0cc2f654e60@2ndquadrant.com
For normal commits and aborts we already reset PgXact->xmin,
so we can simply avoid running SnapshotResetXmin() twice.
During performance tests by Alexander Korotkov, diagnosis
by Andres Freund showed PgXact array as a bottleneck. After
manual analysis by me of the code paths that touch those
memory locations, I was able to identify extraneous code
in the main transaction commit path.
Avoiding touching highly contented shmem improves concurrent
performance slightly on all workloads, confirmed by tests
run by Ashutosh Sharma and Alexander Korotkov.
Simon Riggs
Discussion: CANP8+jJdXE9b+b9F8CQT-LuxxO0PBCB-SZFfMVAdp+akqo4zfg@mail.gmail.com
Previously they were defined using multiples of XLogSegSize.
Remove GUC_UNIT_XSEGS. Introduce GUC_UNIT_MB
Extracted from patch series on XLogSegSize infrastructure.
Beena Emerson
2PC state info held in shmem at PREPARE, then cleaned at COMMIT PREPARED/ABORT PREPARED,
avoiding writing/fsyncing any state information to disk in the normal path, greatly enhancing replay speed.
Prepared transactions that live past one checkpoint redo horizon will be written to disk as now.
Similar conceptually to 978b2f65aa and building upon
the infrastructure created by that commit.
Authors, in equal measure: Stas Kelvich, Nikhil Sontakke and Michael Paquier
Discussion: https://postgr.es/m/CAMGcDxf8Bn9ZPBBJZba9wiyQq-Qk5uqq=VjoMnRnW5s+fKST3w@mail.gmail.com
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
We were assigning values near 255 through "char *" pointers. On machines
where char is signed, that's not entirely kosher, and it's reasonable
for compilers to warn about it.
A better solution would be to change the pointer type to "unsigned char *",
but that would be vastly more invasive. For the moment, let's just apply
this simple backpatchable solution.
Aleksander Alekseev
Discussion: https://postgr.es/m/20170220141239.GD12278@e733.localdomain
Discussion: https://postgr.es/m/2839.1490714708@sss.pgh.pa.us
If file was created/deleted just before powerloss it's possible that
file system will miss that. To prevent it, call fsync() where creating/
unlinkg file is critical.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat, Takayuki Tsunakawa, me
Assert-enabled build crashes but without asserts it works by wrong way:
it may not reset forcing full page write and preventing from starting
exclusive backup with the same name as cancelled.
Patch replaces pair of booleans
nonexclusive_backup_running/exclusive_backup_running to single enum to
correctly describe backup state.
Backpatch to 9.6 where bug was introduced
Reported-by: David Steele
Authors: Michael Paquier, David Steele
Reviewed-by: Anastasia Lubennikova
https://commitfest.postgresql.org/13/1068/
This provides infrastructure for looking up arbitrary, user-supplied
XIDs without a risk of scary-looking failures from within the clog
module. Normally, the oldest XID that can be safely looked up in CLOG
is the same as the oldest XID that can reused without causing
wraparound, and the latter is already tracked. However, while
truncation is in progress, the values are different, so we must
keep track of them separately.
Craig Ringer, reviewed by Simon Riggs and by me.
Discussion: http://postgr.es/m/CAMsr+YHQiWNEi0daCTboS40T+V5s_+dst3PYv_8v2wNVH+Xx4g@mail.gmail.com
Adds write_lag, flush_lag and replay_lag cols to pg_stat_replication.
Implements a lag tracker module that reports the lag times based upon
measurements of the time taken for recent WAL to be written, flushed and
replayed and for the sender to hear about it. These times
represent the commit lag that was (or would have been) introduced by each
synchronous commit level, if the remote server was configured as a
synchronous standby. For an asynchronous standby, the replay_lag column
approximates the delay before recent transactions became visible to queries.
If the standby server has entirely caught up with the sending server and
there is no more WAL activity, the most recently measured lag times will
continue to be displayed for a short time and then show NULL.
Physical replication lag tracking is automatic. Logical replication tracking
is possible but is the responsibility of the logical decoding plugin.
Tracking is a private module operating within each walsender individually,
with values reported to shared memory. Module not used outside of walsender.
Design and code is good enough now to commit - kudos to the author.
In many ways a difficult topic, with important and subtle behaviour so this
shoudl be expected to generate discussion and multiple open items: Test now!
Author: Thomas Munro, following designs by Fujii Masao and Simon Riggs
Review: Simon Riggs, Ian Barwick and Craig Ringer
Internally, we have supported the option to either wait for all of the
WAL associated with a backup to be archived, or to return immediately.
This option is useful to users of pg_stop_backup() as well, when they
are reading the stop backup record position and checking that the WAL
they need has been archived independently.
This patch adds an additional, optional, argument to pg_stop_backup()
which allows the user to indicate if they wish to wait for the WAL to be
archived or not. The default matches current behavior, which is to
wait.
Author: David Steele, with some minor changes, doc updates by me.
Reviewed by: Takayuki Tsunakawa, Fujii Masao
Discussion: https://postgr.es/m/758e3fd1-45b4-5e28-75cd-e9e7f93a4c02@pgmasters.net
A hot standby replica keeps a list of Access Exclusive locks for a top
level transaction. These locks are released when the top level transaction
ends. Searching of this list is O(N^2), and each transaction had to pay the
price of searching this list for locks, even if it didn't take any AE
locks itself.
This patch optimizes this case by having the master server track which
transactions took AE locks, and passes that along to the standby server in
the commit/abort record. This allows the standby to only try to release
locks for transactions which actually took any, avoiding the majority of
the performance issue.
Refactor MyXactAccessedTempRel into MyXactFlags to allow minimal additional
cruft with this.
Analysis and initial patch by David Rowley
Author: David Rowley and Simon Riggs
Uses page-based mechanism to ensure we’re using the correct timeline.
Tests are included to exercise the functionality using a cold disk-level copy
of the master that's started up as a replica with slots intact, but the
intended use of the functionality is with later features.
Craig Ringer, reviewed by Simon Riggs and Andres Freund
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
The original messaging design, introduced in commit 068cfadf9, seems too
chatty now that some time has elapsed since the bug fix; most installations
will be in good shape and don't really need a reminder about this on every
postmaster start.
Hence, arrange to suppress the "wraparound protections are now enabled"
message during startup (specifically, during the TrimMultiXact() call).
The message will still appear if protection becomes effective at some
later point.
Discussion: https://postgr.es/m/17211.1489189214@sss.pgh.pa.us
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
This reverts commit ccce90b398. This
optimization is unsafe, at least, of rollbacks and rollbacks to
savepoints, but I'm concerned there may be other problematic cases as
well. Therefore, I've decided to revert this pending further
investigation.
Commit 0e141c0fbb introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. Use a similar mechanism to reduce
contention on CLogControlLock. Testing shows that this very
significantly reduces the amount of time waiting for CLogControlLock
on high-concurrency pgbench tests run on a large multi-socket
machines; whether that translates into a TPS improvement depends on
how much of that contention is simply shifted to some other lock,
particularly WALWriteLock.
Amit Kapila, with some cosmetic changes by me. Extensively reviewed,
tested, and benchmarked over a period of about 15 months by Simon
Riggs, Robert Haas, Andres Freund, Jesper Pedersen, and especially by
Tomas Vondra and Dilip Kumar.
Discussion: http://postgr.es/m/CAA4eK1L_snxM_JcrzEstNq9P66++F4kKFce=1r5+D1vzPofdtg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1LyR2A+m=RBSZ6rcPEwJ=rVi1ADPSndXHZdjn56yqO6Vg@mail.gmail.com
Discussion: http://postgr.es/m/91d57161-d3ea-0cc2-6066-80713e4f90d7@2ndquadrant.com
This introduces a new generic SASL authentication method, similar to the
GSS and SSPI methods. The server first tells the client which SASL
authentication mechanism to use, and then the mechanism-specific SASL
messages are exchanged in AuthenticationSASLcontinue and PasswordMessage
messages. Only SCRAM-SHA-256 is supported at the moment, but this allows
adding more SASL mechanisms in the future, without changing the overall
protocol.
Support for channel binding, aka SCRAM-SHA-256-PLUS is left for later.
The SASLPrep algorithm, for pre-processing the password, is not yet
implemented. That could cause trouble, if you use a password with
non-ASCII characters, and a client library that does implement SASLprep.
That will hopefully be added later.
Authorization identities, as specified in the SCRAM-SHA-256 specification,
are ignored. SET SESSION AUTHORIZATION provides more or less the same
functionality, anyway.
If a user doesn't exist, perform a "mock" authentication, by constructing
an authentic-looking challenge on the fly. The challenge is derived from
a new system-wide random value, "mock authentication nonce", which is
created at initdb, and stored in the control file. We go through these
motions, in order to not give away the information on whether the user
exists, to unauthenticated users.
Bumps PG_CONTROL_VERSION, because of the new field in control file.
Patch by Michael Paquier and Heikki Linnakangas, reviewed at different
stages by Robert Haas, Stephen Frost, David Steele, Aleksander Alekseev,
and many others.
Discussion: https://www.postgresql.org/message-id/CAB7nPqRbR3GmFYdedCAhzukfKrgBLTLtMvENOmPrVWREsZkF8g%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAB7nPqSMXU35g%3DW9X74HVeQp0uvgJxvYOuA4A-A3M%2B0wfEBv-w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/55192AFE.6080106@iki.fi
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
Twiddle the replication-related code so that its timestamp variables
are declared TimestampTz, rather than the uninformative "int64" that
was previously used for meant-to-be-always-integer timestamps.
This resolves the int64-vs-TimestampTz declaration inconsistencies
introduced by commit 7c030783a, though in the opposite direction to
what was originally suggested.
This required including datatype/timestamp.h in a couple more places
than before. I decided it would be a good idea to slim down that
header by not having it pull in <float.h> etc, as those headers are
no longer at all relevant to its purpose. Unsurprisingly, a small number
of .c files turn out to have been depending on those inclusions, so add
them back in the .c files as needed.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
Discussion: https://postgr.es/m/27694.1487456324@sss.pgh.pa.us
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
If a user requests the commit timestamp for a transaction old enough
that its data is concurrently being truncated away by vacuum at just the
right time, they would receive an ugly internal file-not-found error
message from slru.c rather than the expected NULL return value.
In a primary server, the window for the race is very small: the lookup
has to occur exactly between the two calls by vacuum, and there's not a
lot that happens between them (mostly just a multixact truncate). In a
standby server, however, the window is larger because the truncation is
executed as soon as the WAL record for it is replayed, but the advance
of the oldest-Xid is not executed until the next checkpoint record.
To fix in the primary, simply reverse the order of operations in
vac_truncate_clog. To fix in the standby, augment the WAL truncation
record so that the standby is aware of the new oldest-XID value and can
apply the update immediately. WAL version bumped because of this.
No backpatch, because of the low importance of the bug and its rarity.
Author: Craig Ringer
Reviewed-By: Petr Jelínek, Peter Eisentraut
Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier
Reviewed-By: Kyotaro Horiguchi and me
Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
Some background activity (like checkpoints, archive timeout, standby
snapshots) is not supposed to happen on an idle system. Unfortunately
so far it was not easy to determine when a system is idle, which
defeated some of the attempts to avoid redundant activity on an idle
system.
To make that easier, allow to make individual WAL insertions as not
being "important". By checking whether any important activity happened
since the last time an activity was performed, it now is easy to check
whether some action needs to be repeated.
Use the new facility for checkpoints, archive timeout and standby
snapshots.
The lack of a facility causes some issues in older releases, but in my
opinion the consequences (superflous checkpoints / archived segments)
aren't grave enough to warrant backpatching.
Author: Michael Paquier, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Amit Kapila, Kyotaro HORIGUCHI
Bug: #13685
Discussion:
https://www.postgresql.org/message-id/20151016203031.3019.72930@wrigleys.postgresql.orghttps://www.postgresql.org/message-id/CAB7nPqQcPqxEM3S735Bd2RzApNqSNJVietAC=6kfkYv_45dKwA@mail.gmail.com
Backpatch: -
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
A new thing also called a "barrier" is proposed, but whether we decide
to take that patch or not, this file seems to have outlived its
usefulness.
Thomas Munro
Condition variables provide a flexible way to sleep until a
cooperating process causes an arbitrary condition to become true. In
simple cases, this can be accomplished with a WaitLatch/ResetLatch
loop; the cooperating process can call SetLatch after performing work
that might cause the condition to be satisfied, and the waiting
process can recheck the condition each time. However, if the process
performing the work doesn't have an easy way to identify which
processes might be waiting, this doesn't work, because it can't
identify which latches to set. Condition variables solve that problem
by internally maintaining a list of waiters; a process that may have
caused some waiter's condition to be satisfied must "signal" or
"broadcast" on the condition variable.
Robert Haas and Thomas Munro
The debug messages that merely print StartTransactionCommand,
CommitTransactionCommand, ProcessUtilty, or ProcessQuery with no
additional details seem to be useless. Get rid of them.
The transaction status messages produced by ShowTransactionState are
occasionally useful, but they are extremely verbose, producing
multiple lines of log output every time they fire, which can happens
multiple times per transaction. So, reduce the level to DEBUG5; avoid
emitting an extra line just to explain which debug point is at issue;
and tighten up the rest of the message so it doesn't use quite so much
horizontal space.
With these changes, it's possible to run a somewhat busy system with a
log level even as high as DEBUG4, whereas previously anything above
DEBUG2 would flood the log with output that probably wasn't really all
that useful.
Generally, WAL resource managers are only supposed to examine the
top 4 bits of a WAL record's xl_info; the rest are reserved for
the WAL mechanism itself. A few places were not consistent about
doing this with respect to XLOG_CHECKPOINT and XLOG_SWITCH records.
There's no bug currently, since no additional bits ever get set in
these specific record types, but that might not be true forever.
Let's follow the generic coding rule here too.
Michael Paquier
If a restartpoint flushed no dirty buffers, it could fail to update
the minimum recovery point, leading to a minimum recovery point prior
to the starting REDO location. perform_base_backup() would interpret
that as meaning that no WAL files at all needed to be included in the
backup, failing an internal sanity check. To fix, have restartpoints
always update the minimum recovery point to just after the checkpoint
record itself, so that the file (or files) containing the checkpoint
record will always be included in the backup.
Code by Amit Kapila, per a design suggestion by me, with some
additional work on the code comment by me. Test case by Michael
Paquier. Report by Kyotaro Horiguchi.
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Move the updating of the control file to "in production" status until
the point where WAL writes are allowed. Before, there could be a
significant gap between the control file update and write transactions
actually being allowed. This makes it more reliable to use the control
status to verify the end of a promotion.
From: Michael Paquier <michael.paquier@gmail.com>
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Peter Geoghegan
Reading 2PC state files during recovery was borked, causing corruptions during
recovery. Effect limited to servers with 2PC, subtransactions and
recovery/replication.
Stas Kelvich, reviewed by Michael Paquier and Pavan Deolasee
StandbyRecoverPreparedTransactions() leaked the buffer
used for two phase state file. This was leaked once
at startup and at every shutdown checkpoint seen.
Backpatch to 9.6
Stas Kelvich
This can't really work because standby_mode expects there to be more
WAL arriving, which there will not ever be because there's no WAL
receiver process to fetch it. Moreover, if standby_mode is on then
hot standby might also be turned on, causing even more strangeness
because that expects read-only sessions to be executing in parallel.
Bernd Helmle reported a case where btree_xlog_delete_get_latestRemovedXid
got confused, but rather than band-aiding individual problems it seems
best to prevent getting anywhere near this state in the first place.
Back-patch to all supported branches.
In passing, also fix some omissions of errcodes in other ereport's in
readRecoveryCommandFile().
Michael Paquier (errcode hacking by me)
Discussion: <00F0B2CEF6D0CEF8A90119D4@eje.credativ.lan>
Since the hash AM is going to be revamped to have WAL, this is a good
opportunity to clean up the include file a little bit to avoid including
a lot of extra stuff in the future.
Author: Amit Kapila
Previously pg_xlogdump failed to dump the contents of the WAL file
if the file starts with the continuation WAL record which spans
more than one pages. Since pg_xlogdump assumed that the continuation
record always fits on a page, it could not find the valid WAL record to
start reading from in that case.
This patch changes pg_xlogdump so that it can handle a continuation
WAL record which crosses a page boundary and find the valid record
to start reading from.
Back-patch to 9.3 where pg_xlogdump was introduced.
Author: Pavan Deolasee
Reviewed-By: Michael Paquier and Craig Ringer
Discussion: CABOikdPsPByMiG6J01DKq6om2+BNkxHTPkOyqHM2a4oYwGKsqQ@mail.gmail.com
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
HandleParallelMessages leaked memory into the caller's context. Since it's
called from ProcessInterrupts, there is basically zero certainty as to what
CurrentMemoryContext is, which means we could be leaking into long-lived
contexts. Over the processing of many worker messages that would grow to
be a problem. Things could be even worse than just a leak, if we happened
to service the interrupt while ErrorContext is current: elog.c thinks it
can reset that on its own whim, possibly yanking storage out from under
HandleParallelMessages.
Give HandleParallelMessages its own dedicated context instead, which we can
reset during each call to ensure there's no accumulation of wasted memory.
Discussion: <16610.1472222135@sss.pgh.pa.us>
The previous coding here was capable of adding a "parallel worker" context
line to errors that were not, in fact, returned from a parallel worker.
Instead of using an errcontext callback to add that annotation, just paste
it onto the message by hand; this looks uglier but is more reliable.
Discussion: <19757.1472151987@sss.pgh.pa.us>
As noted by Alvaro, there are CHECK_FOR_INTERRUPTS() calls in the shm_mq.c
functions called by HandleParallelMessages(). I believe they're all
unreachable since we always pass nowait = true, but it doesn't seem like
a great idea to assume that no such call will ever be reachable from
HandleParallelMessages(). If that did happen, there would be a risk of a
recursive call to HandleParallelMessages(), which it does not appear to be
designed for --- for example, there's nothing that would prevent
out-of-order processing of received messages. And certainly such cases
cannot easily be tested. So let's prevent it by holding off interrupts for
the duration of the function. Back-patch to 9.5 which contains identical
code.
Discussion: <14869.1470083848@sss.pgh.pa.us>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
On a standby, ThisTimelineID is always 0, so we would generate a
filename in timeline 0 even for other timelines. Instead, use starttli
which we have retreived from the controlfile.
Report by: Francesco Canovai in bug #14230
Author: Marco Nenciarini
Reviewed by: Michael Paquier and Amit Kapila
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
The fact that no workers were successfully launched in the previous
iteration does not excuse us from setting up properly to try again.
This appears to explain crashes I saw in parallel regression testing
due to error_mqh being NULL when it shouldn't be.
Minor other cosmetic fixes too.
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
Page image should be MAXALIGN'ed because existing code could directly align
pointers in page instead of align offset from beginning of page.
Found during play with indexes as extenstion, Alexander Korotkov and me
Some comments mentioned XLogReplayBuffer, but there's no such function:
that was an interim name for a function that got renamed to
XLogReadBufferForRedo, before commit 2c03216d83 was pushed.
That way, if the result overflows size_t, you'll get an error instead
of undefined behavior, which seems like a plus. This also has the
effect of casting the number of workers from int to Size, which is
better because it's harder to overflow int than size_t.
Dilip Kumar reported this issue and provided a patch upon which this
patch is based, but his version did use mul_size.
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
Rename this function to GenericXLogRegisterBuffer() to make it clearer
what it does, and leave room for other sorts of "register" actions in
future. Also, replace its "bool isNew" argument with an integer flags
argument, so as to allow adding more flags in future without an API
break.
Alexander Korotkov, adjusted slightly by me
The previous coding could allow the contents of the "hole" between pd_lower
and pd_upper to diverge during replay from what it had been when the update
was originally applied. This would pose a problem if checksums were in
use, and in any case would complicate forensic comparisons between master
and slave servers. So force the "hole" to contain zeroes, both at initial
application of a generically-logged action, and at replay.
Alexander Korotkov, adjusted slightly by me
Since we're requiring pages handled by generic_xlog.c to be standard
format, specify REGBUF_STANDARD when doing a full-page image, so that
xloginsert.c can compress out the "hole" between pd_lower and pd_upper.
Given the current API in which this path will be taken only for a newly
initialized page, the hole is likely to be particularly large in such
cases, so that this oversight could easily be performance-significant.
I don't notice any particular change in the runtime of contrib/bloom's
regression test, though.
Make the inner comparison loops of computeDelta() as tight as possible by
pulling considerations of valid and invalid ranges out of the inner loops,
and extending a match or non-match detection as far as possible before
deciding what to do next. To keep this tractable, give up the possibility
of merging fragments across the pd_lower to pd_upper gap. The fraction of
pages where that could happen (ie, there are 4 or fewer bytes in the gap,
*and* data changes immediately adjacent to it on both sides) is too small
to be worth spending cycles on.
Also, avoid two BLCKSZ-length memcpy()s by computing the delta before
moving data into the target buffer, instead of after. This doesn't save
nearly as many cycles as being tenser about computeDelta(), but it still
seems worth doing.
On my machine, this patch cuts a full 40% off the runtime of
contrib/bloom's regression test.
This routine is unsafe as implemented, because it invalidates the page
image pointers returned by previous GenericXLogRegister() calls.
Rather than complicate the API or the implementation to avoid that,
let's just get rid of it; the use-case for having it seems much
too thin to justify a lot of work here.
While at it, do some wordsmithing on the SGML docs for generic WAL.
Improve commentary, use more specific names for the delta fields,
const-ify pointer arguments where possible, avoid assuming that
initializing only the first element of a local array will guarantee
that the remaining elements end up as we need them. (I think that
code in generic_redo actually worked, but only because InvalidBuffer
is zero; this is a particularly ugly way of depending on that ...)
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Benchmarking has shown that the current number of clog buffers limits
scalability. We've previously increased the number in 33aaa139, but
that's not sufficient with a large number of clients.
We've benchmarked the cost of increasing the limit by benchmarking worst
case scenarios; testing showed that 128 buffers don't cause a
regression, even in contrived scenarios, whereas 256 does
There are a number of more complex patches flying around to address
various clog scalability problems, but this is simple enough that we can
get it into 9.6; and is beneficial even after those patches have been
applied.
It is a bit unsatisfactory to increase this in small steps every few
releases, but a better solution seems to require a rewrite of slru.c;
not something done quickly.
Author: Amit Kapila and Andres Freund
Discussion: CAA4eK1+-=18HOrdqtLXqOMwZDbC_15WTyHiFruz7BvVArZPaAw@mail.gmail.com
Now that pg_dump will properly dump out any ACL changes made to
functions which exist in pg_catalog, switch to using the GRANT system
to manage access to those functions.
This means removing 'if (!superuser()) ereport()' checks from the
functions themselves and then REVOKEing EXECUTE right from 'public' for
these functions in system_views.sql.
Reviews by Alexander Korotkov, Jose Luis Tallon
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
Previously non-exclusive backups had to be done using the replication protocol
and pg_basebackup. With this commit it's now possible to make them using
pg_start_backup/pg_stop_backup as well, as long as the backup program can
maintain a persistent connection to the database.
Doing this, backup_label and tablespace_map are returned as results from
pg_stop_backup() instead of being written to the data directory. This makes
the server safe from a crash during an ongoing backup, which can be a problem
with exclusive backups.
The old syntax of the functions remain and work exactly as before, but since the
new syntax is safer this should eventually be deprecated and removed.
Only reference documentation is included. The main section on backup still needs
to be rewritten to cover this, but since that is already scheduled for a separate
large rewrite, it's not included in this patch.
Reviewed by David Steele and Amit Kapila
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Some minor tweaks and comment additions, for cleanliness sake and to
avoid having the upcoming timeline-following patch be polluted with
unrelated cleanup.
Extracted from a larger patch by Craig Ringer, reviewed by Andres
Freund, with some additions by myself.
In this mode, the master waits for the transaction to be applied on
the remote side, not just written to disk. That means that you can
count on a transaction started on the standby to see all commits
previously acknowledged by the master.
To make this work, the standby sends a reply after replaying each
commit record generated with synchronous_commit >= 'remote_apply'.
This introduces a small inefficiency: the extra replies will be sent
even by standbys that aren't the current synchronous standby. But
previously-existing synchronous_commit levels make no attempt at all
to optimize which replies are sent based on what the primary cares
about, so this is no worse, and at least avoids any extra replies for
people not using the feature at all.
Thomas Munro, reviewed by Michael Paquier and by me. Some additional
tweaks by me.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
Previously 2PC header was fixed at 200 bytes, which in most cases wasted
WAL space for a workload using 2PC heavily.
Pavan Deolasee, reviewed by Petr Jelinek
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Using this facility, any utility command can report the target relation
upon which it is operating, if there is one, and up to 10 64-bit
counters; the intent of this is that users should be able to figure out
what a utility command is doing without having to resort to ugly hacks
like attaching strace to a backend.
As a demonstration, this adds very crude reporting to lazy vacuum; we
just report the target relation and nothing else. A forthcoming patch
will make VACUUM report a bunch of additional data that will make this
much more interesting. But this gets the basic framework in place.
Vinayak Pokale, Rahila Syed, Amit Langote, Robert Haas, reviewed by
Kyotaro Horiguchi, Jim Nasby, Thom Brown, Masahiko Sawada, Fujii Masao,
and Masanori Oyama.
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
A simple SELECT is handled by PortalRunSelect, not ProcessQuery. Also,
the previous indentation was unclear: change it so that a deeper level
of indentation indicates that the outer function calls the inner one.
Stas Kelvich
Originally, we didn't have nworkers_launched, so code that used parallel
contexts had to be preprared for the possibility that not all of the
workers requested actually got launched. But now we can count on knowing
the number of workers that were successfully launched, which can shave
off a few cycles and simplify some code slightly.
Amit Kapila, reviewed by Haribabu Kommi, per a suggestion from Peter
Geoghegan.
StartupSUBTRANS() incorrectly handled cases near the max pageid in the subtrans
data structure, which in some cases could lead to errors in startup for Hot
Standby.
This patch wraps the pageids correctly, avoiding any such errors.
Identified by exhaustive crash testing by Jeff Janes.
Jeff Janes
Commit 4de82f7d7 increased the WAL flush rate, mainly to increase the
likelihood that hint bits can be set quickly. More quickly set hint bits
can reduce contention around the clog et al. But unfortunately the
increased flush rate can have a significant negative performance impact,
I have measured up to a factor of ~4. The reason for this slowdown is
that if there are independent writes to the underlying devices, for
example because shared buffers is a lot smaller than the hot data set,
or because a checkpoint is ongoing, the fdatasync() calls force cache
flushes to be emitted to the storage.
This is achieved by flushing WAL only if the last flush was longer than
wal_writer_delay ago, or if more than wal_writer_flush_after (new GUC)
unflushed blocks are pending. Based on some tests the default for
wal_writer_delay is 1MB, which seems to work well both on SSD and
rotational media.
To avoid negative performance impact due to 4de82f7d7 an earlier
commit (db76b1e) made SetHintBits() more likely to succeed; preventing
performance regressions in the pgbench tests I performed.
Discussion: 20160118163908.GW10941@awork2.anarazel.de
NextXID has been rendered in the form of a pg_lsn even though it
really is not. This can cause confusion, so change the format from
%u/%u to %u:%u, per discussion on hackers.
Complaint by me, patch by me and Bruce, reviewed by Michael Paquier
and Alvaro. Applied to HEAD only.
Author: Joe Conway, Bruce Momjian
Reviewed-by: Michael Paquier, Alvaro Herrera
Backpatch-through: master
Historically this message has been emitted at the end of ShutdownXLOG().
That's not an insane place for it in a standalone backend, but in the
postmaster environment we've grown a fair amount of stuff that happens
later, including archiver/walsender shutdown, stats collector shutdown,
etc. Recent buildfarm experimentation showed that on slower machines
there could be many seconds' delay between finishing ShutdownXLOG() and
actual postmaster exit. That's fairly confusing, both for testing
purposes and for DBAs. Hence, move the code that prints this message
into UnlinkLockFiles(), so that it comes out just after we remove the
postmaster's pidfile. That is a more appropriate definition of "is shut
down" from the point of view of "pg_ctl stop", for example. In general,
removing the pidfile should be the last externally-visible action of
either a postmaster or a standalone backend; compare commit
d73d14c271 for instance. So this seems
like a reasonably future-proof approach.
Early returns from the buildfarm show that there's a bit of a gap in the
logging I added in 3971f64843b02e4a: the portion of CreateCheckPoint()
after CheckPointGuts() can take a fair amount of time. Add a few more
log messages in that section of code. This too shall be reverted later.
This is a quick hack, due to be reverted when its purpose has been served,
to try to gather information about why some of the buildfarm critters
regularly fail with "postmaster does not shut down" complaints. Maybe they
are just really overloaded, but maybe something else is going on. Hence,
instrument pg_ctl to print the current time when it starts waiting for
postmaster shutdown and when it gives up, and add a lot of logging of the
current time in the server's checkpoint and shutdown code paths.
No attempt has been made to make this pretty. I'm not even totally sure
if it will build on Windows, but we'll soon find out.
When force_parallel_mode = true, we enable the parallel mode restrictions
for all queries for which this is believed to be safe. For the subset of
those queries believed to be safe to run entirely within a worker, we spin
up a worker and run the query there instead of running it in the
original process. When force_parallel_mode = regress, make additional
changes to allow the regression tests to run cleanly even though parallel
workers have been injected under the hood.
Taken together, this facilitates both better user testing and better
regression testing of the parallelism code.
Robert Haas, with help from Amit Kapila and Rushabh Lathia.
For locking purposes, we now regard heavyweight locks as mutually
non-conflicting between cooperating parallel processes. There are some
possible pitfalls to this approach that are not to be taken lightly,
but it works OK for now and can be changed later if we find a better
approach. Without this, it's very easy for parallel queries to
silently self-deadlock if the user backend holds strong relation locks.
Robert Haas, with help from Amit Kapila. Thanks to Noah Misch and
Andres Freund for extensive discussion of possible issues with this
approach.
2PC state info is written only to WAL at PREPARE, then read back from WAL at
COMMIT PREPARED/ABORT PREPARED. Prepared transactions that live past one bufmgr
checkpoint cycle will be written to disk in the same form as previously. Crash
recovery path is not altered. Measured performance gains of 50-100% for short
2PC transactions by completely avoiding writing files and fsyncing. Other
optimizations still available, further patches in related areas expected.
Stas Kelvich and heavily edited by Simon Riggs
Based upon earlier ideas and patches by Michael Paquier and Heikki Linnakangas,
a concrete example of how Postgres-XC has fed back ideas into PostgreSQL.
Reviewed by Michael Paquier, Jeff Janes and Andres Freund
Performance testing by Jesper Pedersen
Previously we didn’t have a generic WAL page read callback function,
surprisingly. Logical decoding has logical_read_local_xlog_page(), which was
actually generic, so move that to xlogfunc.c and rename to
read_local_xlog_page().
Maintain logical_read_local_xlog_page() so existing callers still work.
As requested by Michael Paquier, Alvaro Herrera and Andres Freund
Recovery does not achieve its goal of zeroing all pg_multixact entries
whose accompanying WAL records never reached disk. Remove that claim
and justify its expendability. Detail the need for TrimMultiXact(),
which has little in common with the TrimCLOG() rationale. Merge two
tightly-related comments. Stop presenting pg_multixact as specific to
heap_lock_tuple(); PostgreSQL 9.3 extended its use to heap_update().
Noticed while investigating a report from Andres Freund.
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
It's a bit cumbersome to use LWLockNewTrancheId(), because the returned
value needs to be shared between backends so that each backend can call
LWLockRegisterTranche() with the correct ID. So, for built-in tranches,
use a hard-coded value instead.
This is motivated by an upcoming patch adding further built-in tranches.
Andres Freund and Robert Haas
Previously, if find_multixact_start() failed, SetOffsetVacuumLimit() would
install 0 into MultiXactState->offsetStopLimit if it previously succeeded.
Luckily, there are no known cases where find_multixact_start() will return
an error in 9.5 and above. But if it were to happen, for example due to
filesystem permission issues, it'd be somewhat bad: GetNewMultiXactId()
could continue allocating mxids even if close to a wraparound, or it could
erroneously stop allocating mxids, even if no wraparound is looming. The
wrong value would be corrected the next time SetOffsetVacuumLimit() is
called, or by a restart.
Reported-By: Noah Misch, although this is not his preferred fix
Discussion: 20151210140450.GA22278@alap3.anarazel.de
Backpatch: 9.5, where the bug was introduced as part of 4f627f
This module needs explicit initialization in order to replay WAL records
in recovery, but we had broken this recently following changes to make
other (stranger) scenarios work correctly. To fix, rework the
initialization sequence so that it always takes place before WAL replay
commences for both master and standby.
I could have gone for a more localized fix that just added a "startup"
call for the master server, but it seemed better to restructure the
existing callers as well so that the whole thing made more sense. As a
drawback, there is more control logic in xlog.c now than previously, but
doing otherwise meant passing down the ControlFile flag, which seemed
uglier as a whole.
This also meant adding a check to not re-execute ActivateCommitTs if it
had already been called.
Reported by Fujii Masao.
Backpatch to 9.5.
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
As pointed out by Fujii Masao, we weren't quite there on a standby
behaving sanely: first because we were failing to acquire the correct
state in the case where no XLOG_PARAMETER_CHANGE message was sent
(because a checkpoint had already happened after the setting was changed
in the master, and then the standby was restarted); and second because
promoting the standby with the feature enabled failed to activate it if
the master had the feature disabled.
This patch fixes both those misbehaviors hopefully without
re-introducing any old problems.
Also change the hint emitted in a standby together with the error
message about the feature being disabled, to make it point out that the
place to chance the setting is the master. Otherwise, if the setting is
already enabled in the standby, it is very confusing to have it say that
the setting must be enabled ...
Authors: Álvaro Herrera, Petr Jelínek.
Backpatch to 9.5.
This makes it significantly easier to identify these lwlocks in
LWLOCK_STATS or Trace_lwlocks output. It's also arguably better
from a modularity standpoint, since lwlock.c no longer needs to
know anything about the LWLock needs of the higher-level SLRU
facility.
Ildus Kurbangaliev, reviewd by Álvaro Herrera and by me.
Up until now, the total amount of data that could be passed to a
background worker at startup was one datum, which can be a small as
4 bytes on some systems. That's enough to pass a dsm_handle or an
array index, but not much else. Add a bgw_extra flag to the
BackgroundWorker struct, allowing up to 128 bytes to be passed to
a new worker on any platform.
Use this to fix a problem I recently discovered with the parallel
context machinery added in 9.5: the master assigns each worker an
array index, and each worker subsequently assigns itself an array
index, and there's nothing to guarantee that the two sets of indexes
match, leading to chaos.
Normally, I would not back-patch the change to add bgw_extra, since it
is basically a feature addition. However, since 9.5 is still in beta
and there seems to be no other sensible way to repair the broken
parallel context machinery, back-patch to 9.5. Existing background
worker code can ignore the bgw_extra field without a problem, but
might need to be recompiled since the structure size has changed.
Report and patch by me. Review by Amit Kapila.
Commit b0b0d84b3d purported to make it
possible to relaunch workers using the same parallel context, but it had
an unpleasant race condition: we might reinitialize after the workers
have sent their last control message but before they have dettached the
DSM, leaving to crashes. Repair by introducing a new ParallelContext
operation, ReinitializeParallelDSM.
Adjust execParallel.c to use this new support, so that we can rescan a
Gather node by relaunching workers but without needing to recreate the
DSM.
Amit Kapila, with some adjustments by me. Extracted from latest parallel
sequential scan patch.
Further tweak commit_ts.c so that on a standby the state is completely
consistent with what that in the master, rather than behaving
differently in the cases that the settings differ. Now in standby and
master the module should always be active or inactive in lockstep.
Author: Petr Jelínek, with some further tweaks by Álvaro Herrera.
Backpatch to 9.5, where commit timestamps were introduced.
Discussion: http://www.postgresql.org/message-id/5622BF9D.2010409@2ndquadrant.com
This may allow some callers to avoid the overhead involved in tearing
down a parallel context and then setting up a new one, which means
releasing the DSM and then allocating and populating a new one. I
suspect we'll want to revise the Gather node to make use of this new
capability, but even if not it may be useful elsewhere and requires
very little additional code.
In order for this to be safe, the code which hands true serializability
will need to taught that the SIRead locks taken by a parallel worker
pertain to the same transaction as those taken by the parallel leader.
Some further changes may be needed as well. Until the necessary
adaptations are made, don't generate parallel plans in serializable
mode, and if a previously-generated parallel plan is used after
serializable mode has been activated, run it serially.
This fixes a bug in commit 7aea8e4f2d.
check_role() tries to verify that the user has permission to become the
requested role, but this is inappropriate in a parallel worker, which
needs to exactly recreate the master's authorization settings. So skip
the check in that case.
This fixes a bug in commit 924bcf4f16.
Starting a parallel worker transaction changes our notion of which XIDs
are in-progress or committed, and our notion of the current command
counter ID. Therefore, our view of these caches prior to starting
this transaction may no longer valid. Defend against that by clearing
them.
This fixes a bug in commit 924bcf4f16.
Commit 924bcf4f16 failed to enforce
parallel mode checks during the commit of a parallel worker, because
we exited parallel mode prior to ending the transaction so that we
could pop the active snapshot. Re-establish parallel mode during
parallel worker commit. Without this, it's far too easy for unsafe
actions during the pre-commit sequence to crash the server instead of
hitting the error checks as intended.
Just to be extra paranoid, adjust a couple of the sanity checks in
xact.c to check not only IsInParallelMode() but also
IsParallelWorker().
Commit 924bcf4f16 correctly forbade
parallel workers to modify the command counter while in parallel mode,
but it inexplicably neglected to actually transfer the current command
counter from leader to workers. This can result in the workers seeing
a different set of tuples from the leader, which is bad. Repair.
Commit 2bd9e412f9 introduced a mechanism
for relaying protocol messages from a background worker to another
backend via a shm_mq. However, there was no provision for shutting
down the communication channel. Therefore, a protocol message sent
late in the shutdown sequence, such as a DEBUG message resulting from
cranking up log_min_messages, could crash the server. To fix, install
an on_dsm_detach callback that disables sending messages to the shm_mq
when the associated DSM is detached.
Module initialization was still not completely correct after commit
6b61955135, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
If a transaction or subtransaction creates a ParallelContext but ends
without calling InitializeParallelDSM, the previous code would
seg fault. Fix that.
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
In 9.5 and master there is no need to support legacy truncation. This is
just committed separately to make it easier to backpatch the WAL logged
multixact truncation to 9.3 and 9.4 if we later decide to do so.
I bumped master's magic from 0xD086 to 0xD088 and 9.5's from 0xD085 to
0xD087 to avoid 9.5 reusing a value that has been in use on master while
keeping the numbers increasing between major versions.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Backpatch: 9.5
The fact that multixact truncations are not WAL logged has caused a fair
share of problems. Amongst others it requires to do computations during
recovery while the database is not in a consistent state, delaying
truncations till checkpoints, and handling members being truncated, but
offset not.
We tried to put bandaids on lots of these issues over the last years,
but it seems time to change course. Thus this patch introduces WAL
logging for multixact truncations.
This allows:
1) to perform the truncation directly during VACUUM, instead of delaying it
to the checkpoint.
2) to avoid looking at the offsets SLRU for truncation during recovery,
we can just use the master's values.
3) simplify a fair amount of logic to keep in memory limits straight,
this has gotten much easier
During the course of fixing this a bunch of additional bugs had to be
fixed:
1) Data was not purged from memory the member's SLRU before deleting
segments. This happened to be hard or impossible to hit due to the
interlock between checkpoints and truncation.
2) find_multixact_start() relied on SimpleLruDoesPhysicalPageExist - but
that doesn't work for offsets that haven't yet been flushed to
disk. Add code to flush the SLRUs to fix. Not pretty, but it feels
slightly safer to only make decisions based on actual on-disk state.
3) find_multixact_start() could be called concurrently with a truncation
and thus fail. Via SetOffsetVacuumLimit() that could lead to a round
of emergency vacuuming. The problem remains in
pg_get_multixact_members(), but that's quite harmless.
For now this is going to only get applied to 9.5+, leaving the issues in
the older branches in place. It is quite possible that we need to
backpatch at a later point though.
For the case this gets backpatched we need to handle that an updated
standby may be replaying WAL from a not-yet upgraded primary. We have to
recognize that situation and use "old style" truncation (i.e. looking at
the SLRUs) during WAL replay. In contrast to before, this now happens in
the startup process, when replaying a checkpoint record, instead of the
checkpointer. Doing truncation in the restartpoint is incorrect, they
can happen much later than the original checkpoint, thereby leading to
wraparound. To avoid "multixact_redo: unknown op code 48" errors
standbys would have to be upgraded before primaries.
A later patch will bump the WAL page magic, and remove the legacy
truncation codepaths. Legacy truncation support is just included to make
a possible future backpatch easier.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Reviewed-By: Robert Haas, Alvaro Herrera, Thomas Munro
Backpatch: 9.5 for now
This patch changes the log message which is logged when the server
successfully renames backup_label file to *.old but fails to rename
tablespace_map file during the shutdown. Previously the WARNING
message "online backup mode was not canceled" was logged in that case.
However this message is confusing because the backup mode is treated
as canceled whenever backup_label is successfully renamed. So this
commit makes the server log the message "online backup mode canceled"
in that case.
Also this commit changes errdetail messages so that they follow the
error message style guide.
Back-patch to 9.5 where tablespace_map file is introduced.
Original patch by Amit Kapila, heavily modified by me.
This commit makes postmaster forcibly remove the files signaling
a standby promotion request. Otherwise, the existence of those files
can trigger a promotion too early, whether a user wants that or not.
This removal of files is usually unnecessary because they can exist
only during a few moments during a standby promotion. However
there is a race condition: if pg_ctl promote is executed and creates
the files during a promotion, the files can stay around even after
the server is brought up to new master. Then, if new standby starts
by using the backup taken from that master, the files can exist
at the server startup and should be removed in order to avoid
an unexpected promotion.
Back-patch to 9.1 where promote signal file was introduced.
Problem reported by Feike Steenbergen.
Original patch by Michael Paquier, modified by me.
Discussion: 20150528100705.4686.91426@wrigleys.postgresql.org
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Tom Lane and Michael Paquier
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
The code had bugs that would cause crashes if NULL was passed as that
argument (originally intended to mean not to bother returning its
value), and after inspection it turns out that nothing seems interested
in the case that *ts is NULL anyway. Therefore, remove the partial
checks intended to support that case.
Author: Michael Paquier
though I didn't include a proposed Assert.
Backpatch to 9.5.
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
Amit reviewed the replication origins patch and made some good
points. Address them. This fixes typos in error messages, docs and
comments and adds a missing error check (although in a
should-never-happen scenario).
Discussion: CAA4eK1JqUBVeWWKwUmBPryFaje4190ug0y-OAUHWQ6tD83V4xg@mail.gmail.com
Backpatch: 9.5, where replication origins were introduced.
When a write transaction commits, it must clear its XID advertised via
the ProcArray, which requires that we hold ProcArrayLock in exclusive
mode in order to prevent concurrent processes running GetSnapshotData
from seeing inconsistent results. When many processes try to commit
at once, ProcArrayLock must change hands repeatedly, with each
concurrent process trying to commit waking up to acquire the lock in
turn. To make things more efficient, when more than one backend is
trying to commit a write transaction at the same time, have just one
of them acquire ProcArrayLock in exclusive mode and clear the XIDs of
all processes in the group. Benchmarking reveals that this is much
more efficient at very high client counts.
Amit Kapila, heavily revised by me, with some review also from Pavan
Deolasee.
If tablespace_map file is present without backup_label file, there is
no use of such file. There is no harm in retaining it, but it is better
to get rid of the map file so that we don't have any redundant file
in data directory and it will avoid any sort of confusion. It seems
prudent though to just rename the file out of the way rather than
delete it completely, also we ignore any error that occurs in rename
operation as even if map file is present without backup_label file,
it is harmless.
Back-patch to 9.5 where tablespace_map file was introduced.
Amit Kapila, reviewed by Robert Haas, Alvaro Herrera and me.
If a call to WaitForXLogInsertionsToFinish() returned a value in the middle
of a page, and another backend then started to insert a record to the same
page, and then you called WaitXLogInsertionsToFinish() again, the second
call might return a smaller value than the first call. The problem was in
GetXLogBuffer(), which always updated the insertingAt value to the
beginning of the requested page, not the actual requested location. Because
of that, the second call might return a xlog pointer to the beginning of
the page, while the first one returned a later position on the same page.
XLogFlush() performs two calls to WaitXLogInsertionsToFinish() in
succession, and holds WALWriteLock on the second call, which can deadlock
if the second call to WaitXLogInsertionsToFinish() blocks.
Reported by Spiros Ioannou. Backpatch to 9.4, where the more scalable
WALInsertLock mechanism, and this bug, was introduced.
The lwlock scalability work introduced two race conditions into the
lwlock variable support provided for xlog.c. First, and harmlessly on
most platforms, it set/read the variable without the spinlock in some
places. Secondly, due to the removal of the spinlock, it was possible
that a backend missed changes to the variable's state if it changed in
the wrong moment because checking the lock's state, the variable's state
and the queuing are not protected by a single spinlock acquisition
anymore.
To fix first move resetting the variable's from LWLockAcquireWithVar to
WALInsertLockRelease, via a new function LWLockReleaseClearVar. That
prevents issues around waiting for a variable's value to change when a
new locker has acquired the lock, but not yet set the value. Secondly
re-check that the variable hasn't changed after enqueing, that prevents
the issue that the lock has been released and already re-acquired by the
time the woken up backend checks for the lock's state.
Reported-By: Jeff Janes
Analyzed-By: Heikki Linnakangas
Reviewed-By: Heikki Linnakangas
Discussion: 5592DB35.2060401@iki.fi
Backpatch: 9.5, where the lwlock scalability went in
XLogReaderFree failed to free the per-block data buffers, when they
happened to not be used by the latest read WAL record.
Michael Paquier. Backpatch to 9.5, where the per-block buffers were added.
If there were no subtransactions (or multixacts) active, we would calculate
the oldestxid == next xid. That's correct, but if next XID happens to be
on the next pg_subtrans (pg_multixact) page, the page does not exist yet,
and SimpleLruTruncate will produce an "apparent wraparound" warning. The
warning is harmless in this case, but looks very alarming to users.
Backpatch to all supported versions. Patch and analysis by Thomas Munro.
There was already a sanity-check in the other direction: if a page was
marked with WILL_INIT, it had to be initialized by the redo routine. It's
not strictly necessary for correctness that a page is marked with WILL_INIT
if it's going to be initialized at redo, but it's a missed optimization if
nothing else.
Fix a few instances of this issue in SP-GiST, where a block in WAL record
was not marked with WILL_INIT, but was in fact always initialized at redo.
We were creating a full-page image of the page unnecessarily in those
cases.
Backpatch to 9.5, where the new WILL_INIT flag was added.
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
XLogFileCopy() was changed heavily in commit de76884. However it was
partially reverted in commit 7abc685 and most of those changes to
XLogFileCopy() were no longer needed. Then commit 7cbee7c removed
those unnecessary code, but XLogFileCopy() looked different in master
and 9.4 though the contents are almost the same.
This patch makes XLogFileCopy() look the same in master and back-branches,
which makes back-patching easier, per discussion on pgsql-hackers.
Back-patch to 9.5.
Discussion: 55760844.7090703@iki.fi
Michael Paquier
When archive recovery and restartpoints were initially introduced,
checkpoint_segments was ignored on the grounds that the files restored from
archive don't consume any space in the recovery server. That was changed in
later releases, but even then it was arguably a feature rather than a bug,
as performing restartpoints as often as checkpoints during normal operation
might be excessive, but you might nevertheless not want to waste a lot of
space for pre-allocated WAL by setting checkpoint_segments to a high value.
But now that we have separate min_wal_size and max_wal_size settings, you
can bound WAL usage with max_wal_size, and still avoid consuming excessive
space usage by setting min_wal_size to a lower value, so that argument is
moot.
There are still some issues with actually limiting the space usage to
max_wal_size: restartpoints in recovery can only start after seeing the
checkpoint record, while a checkpoint starts flushing buffers as soon as
the redo-pointer is set. Restartpoint is paced to happen at the same
leisurily speed, determined by checkpoint_completion_target, as checkpoints,
but because they are started later, max_wal_size can be exceeded by upto
one checkpoint cycle's worth of WAL, depending on
checkpoint_completion_target. But that seems better than not trying at all,
and max_wal_size is a soft limit anyway.
The documentation already claimed that max_wal_size is obeyed in recovery,
so this just fixes the behaviour to match the docs. However, add some
weasel-words there to mention that max_wal_size may well be exceeded by
some amount in recovery.
Seems like cheap insurance for WAL bugs. A spurious call to
XLogBeginInsert() in itself would be fairly harmless, but if there is any
data registered and the insertion is not completed/cancelled properly, there
is a risk that the data ends up in a wrong WAL record.
Per Jeff Janes's suggestion.
Don't apply rmtree(), which will gleefully remove an entire subtree,
and don't even apply unlink() unless it's symlink or a directory,
the only things that we expect to find.
Amit Kapila, with minor tweaks by me, per extensive discussions
involving Andrew Dunstan, Fujii Masao, and Heikki Linnakangas,
at least some of whom also reviewed the code.
Previously autovacuum was not necessarily triggered if space in the
members slru got tight. The first problem was that the signalling was
tied to values in the offsets slru, but members can advance much
faster. Thats especially a problem if old sessions had been around that
previously prevented the multixact horizon to increase. Secondly the
skipping logic doesn't work if the database was restarted after
autovacuum was triggered - that knowledge is not preserved across
restart. This is especially a problem because it's a common
panic-reaction to restart the database if it gets slow to
anti-wraparound vacuums.
Fix the first problem by separating the logic for members from
offsets. Trigger autovacuum whenever a multixact crosses a segment
boundary, as the current member offset increases in irregular values, so
we can't use a simple modulo logic as for offsets. Add a stopgap for
the second problem, by signalling autovacuum whenver ERRORing out
because of boundaries.
Discussion: 20150608163707.GD20772@alap3.anarazel.de
Backpatch into 9.3, where it became more likely that multixacts wrap
around.
9a20a9b2 added a new elog(), enabled when WAL_DEBUG is defined. The
other WAL_DEBUG dependant messages check for the wal_debug GUC, but this
one did not. While at it replace 'upto' with 'up to'.
Discussion: 20150610110253.GF3832@alap3.anarazel.de
Backpatch to 9.4, the first release containing 9a20a9b2.
Since find_multixact_start() relies on SimpleLruDoesPhysicalPageExist(),
and that function looks only at the on-disk state, it's possible for it
to fail to find a page that exists in the in-memory SLRU that has not
been written yet. If that happens, SetOffsetVacuumLimit() will
erroneously decide to force emergency autovacuuming immediately.
We should probably fix find_multixact_start() to consider the data
cached in memory as well as on the on-disk state, but that's no excuse
for SetOffsetVacuumLimit() to be stupid about the case where it can
no longer read the value after having previously succeeded in doing so.
Report by Andres Freund.
* Remove unused argument "dstfname" and related code from XLogFileCopy().
* Previously XLogFileCopy() returned a pstrdup'd string so that
InstallXLogFileSegment() used it later. Since the pstrdup'd string was never
free'd, there could be a risk of memory leak. It was almost harmless because
the startup process exited just after calling XLogFileCopy(), it existed.
This commit changes XLogFileCopy() so that it directly calls
InstallXLogFileSegment() and doesn't call pstrdup() at all. Which fixes that
memory leak problem.
* Extend InstallXLogFileSegment() so that the caller can specify the log level.
Which allows us to emit an error when InstallXLogFileSegment() fails a disk
file access like link() and rename(). Previously it was always logged with
LOG level and additionally needed to be logged with ERROR when we wanted
to treat it as an error.
Michael Paquier
HotStandbyActiveInReplay, introduced in 061b079f, only allowed WAL
replay to happen in the startup process, missing the single user case.
This buglet is fairly harmless as it only causes problems when single
user mode in an assertion enabled build is used to replay a btree vacuum
record.
Backpatch to 9.2. 061b079f was backpatched further, but the assertion
was not.
Recent commits, mainly b69bf30b9b and
53bb309d2d, introduced mechanisms to
protect against wraparound of the MultiXact member space: the number
of multixacts that can exist at one time is limited to 2^32, but the
total number of members in those multixacts is also limited to 2^32,
and older code did not take care to enforce the second limit,
potentially allowing old data to be overwritten while it was still
needed.
Unfortunately, these new mechanisms failed to account for the fact
that the code paths in which they run might be executed during
recovery or while the cluster was in an inconsistent state. Also,
they failed to account for the fact that users who used pg_upgrade
to upgrade a PostgreSQL version between 9.3.0 and 9.3.4 might have
might oldestMultiXid = 1 in the control file despite the true value
being larger.
To fix these problems, first, avoid unnecessarily examining the
mmembers of MultiXacts when the cluster is not known to be consistent.
TruncateMultiXact has done this for a long time, and this patch does
not fix that. But the new calls used to prevent member wraparound
are not needed until we reach normal running, so avoid calling them
earlier. (SetMultiXactIdLimit is actually called before InRecovery
is set, so we can't rely on that; we invent our own multixact-specific
flag instead.)
Second, make failure to look up the members of a MultiXact a non-fatal
error. Instead, if we're unable to determine the member offset at
which wraparound would occur, postpone arming the member wraparound
defenses until we are able to do so. If we're unable to determine the
member offset that should force autovacuum, force it continuously
until we are able to do so. If we're unable to deterine the member
offset at which we should truncate the members SLRU, log a message and
skip truncation.
An important consequence of these changes is that anyone who does have
a bogus oldestMultiXid = 1 value in pg_control will experience
immediate emergency autovacuuming when upgrading to a release that
contains this fix. The release notes should highlight this fact. If
a user has no pg_multixact/offsets/0000 file, but has oldestMultiXid = 1
in the control file, they may wish to vacuum any tables with
relminmxid = 1 prior to upgrading in order to avoid an immediate
emergency autovacuum after the upgrade. This must be done with a
PostgreSQL version 9.3.5 or newer and with vacuum_multixact_freeze_min_age
and vacuum_multixact_freeze_table_age set to 0.
This patch also adds an additional log message at each database server
startup, indicating either that protections against member wraparound
have been engaged, or that they have not. In the latter case, once
autovacuum has advanced oldestMultiXid to a sane value, the message
indicating that the guards have been engaged will appear at the next
checkpoint. A few additional messages have also been added at the DEBUG1
level so that the correct operation of this code can be properly audited.
Along the way, this patch fixes another, related bug in TruncateMultiXact
that has existed since PostgreSQL 9.3.0: when no MultiXacts exist at
all, the truncation code looks up NextMultiXactId, which doesn't exist
yet. This can lead to TruncateMultiXact removing every file in
pg_multixact/offsets instead of keeping one around, as it should.
This in turn will cause the database server to refuse to start
afterwards.
Patch by me. Review by Álvaro Herrera, Andres Freund, Noah Misch, and
Thomas Munro.
Commit 2ce439f337 introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
Typo in commit 7cbee7c0a. No practical effect since the buffer should
never actually be overrun, but various compilers and static analyzers will
whine about it.
Petr Jelinek
With commit de768844, a copy of the partial segment was archived with the
.partial suffix, but the original file was still left in pg_xlog, so it
didn't actually solve the problems with archiving the partial segment that
it was supposed to solve. With this patch, the partial segment is renamed
rather than copied, so we only archive it with the .partial suffix.
Also be more robust in detecting if the last segment is already being
archived. Previously I used XLogArchiveIsBusy() for that, but that's not
quite right. With archive_mode='always', there might be a .ready file for
it, and we don't want to rename it to .partial in that case.
The old segment is needed until we're fully committed to the new timeline,
i.e. until we've written the end-of-recovery WAL record and updated the
min recovery point and timeline in the control file. So move the renaming
later in the startup sequence, after all that's been done.
Previously even if recovery_target_action was set to pause and
the recovery target was reached, the recovery could never be paused.
Because the setting of pause was *always* overridden with that of
shutdown unexpectedly. This override is valid and intentional
if hot_standby is not enabled because there is no way to resume
the paused recovery in this case and the setting of pause is
completely useless. But not if hot_standby is enabled.
This patch changes the code so that the setting of pause is overridden
with that of shutdown only when hot_standby is not enabled.
Bug reported by Andres Freund
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Windows can't reliably restore symbolic links from a tar format, so
instead during backup start we create a tablespace_map file, which is
used by the restoring postgres to create the correct links in pg_tblspc.
The backup protocol also now has an option to request this file to be
included in the backup stream, and this is used by pg_basebackup when
operating in tar mode.
This is done on all platforms, not just Windows.
This means that pg_basebackup will not not work in tar mode against 9.4
and older servers, as this protocol option isn't implemented there.
Amit Kapila, reviewed by Dilip Kumar, with a little editing from me.
Analysis by Noah Misch shows that the 25% threshold set by commit
53bb309d2d is lower than any other,
similar autovac threshold. While we don't know exactly what value
will be optimal for all users, it is better to err a little on the
high side than on the low side. A higher value increases the risk
that users might exhaust the available space and start seeing errors
before autovacuum can clean things up sufficiently, but a user who
hits that problem can compensate for it by reducing
autovacuum_multixact_freeze_max_age to a value dependent on their
average multixact size. On the flip side, if the emergency cap
imposed by that patch kicks in too early, the user will experience
excessive wraparound scanning and will be unable to mitigate that
problem by configuration. The new value will hopefully reduce the
risk of such bad experiences while still providing enough headroom
to avoid multixact member exhaustion for most users.
Along the way, adjust the documentation to reflect the effects of
commit 04e6d3b877, which taught
autovacuum to run for multixact wraparound even when autovacuum
is configured off.
Commit b69bf30b9b advanced the stop point
at vacuum time, but this has subsequently been shown to be unsafe as a
result of analysis by myself and Thomas Munro and testing by Thomas
Munro. The crux of the problem is that the SLRU deletion logic may
get confused about what to remove if, at exactly the right time during
the checkpoint process, the head of the SLRU crosses what used to be
the tail.
This patch, by me, fixes the problem by advancing the stop point only
following a checkpoint. This has the additional advantage of making
the removal logic work during recovery more like the way it works during
normal running, which is probably good.
At least one of the calls to DetermineSafeOldestOffset which this patch
removes was already dead, because MultiXactAdvanceOldest is called only
during recovery and DetermineSafeOldestOffset was set up to do nothing
during recovery. That, however, is inconsistent with the principle that
recovery and normal running should work similarly, and was confusing to
boot.
Along the way, fix some comments that previous patches in this area
neglected to update. It's not clear to me whether there's any
concrete basis for the decision to use only half of the multixact ID
space, but it's neither necessary nor sufficient to prevent multixact
member wraparound, so the comments should not say otherwise.
Commit b69bf30b9b failed to take into
account the possibility that there might be no multixacts in existence
at all.
Report by Thomas Munro; patch by me.
Previously, we would archive the possible-incomplete WAL segment with its
normal filename, but that causes trouble if the server owning that timeline
is still running, and tries to archive the same segment later. It's not nice
for the standby to trip up the master's archival like that. And it's pretty
confusing, anyway, to have an incomplete segment in the archive that's
indistinguishable from a normal, complete segment.
To avoid such confusion, add a .partial suffix to the file. Or to be more
precise, make a copy of the old segment under the .partial suffix, and
archive that instead of the original file. pg_receivexlog also uses the
.partial suffix for the same purpose, to tell apart incompletely streamed
files from complete ones.
There is no automatic mechanism to use the .partial files at recovery, so
they will go unused, unless the administrator manually copies to them to
the pg_xlog directory (and removes the .partial suffix). Recovery won't
normally need the WAL - when recovering to the new timeline, it will find
the same WAL on the first segment on the new timeline instead - but it
nevertheless feels better to archive the file with the .partial suffix, for
debugging purposes if nothing else.
The logic introduced in commit b69bf30b9b
and repaired in commits 669c7d20e6 and
7be47c56af helps to ensure that we don't
overwrite old multixact member information while it is still needed,
but a user who creates many large multixacts can still exhaust the
member space (and thus start getting errors) while autovacuum stands
idly by.
To fix this, progressively ramp down the effective value (but not the
actual contents) of autovacuum_multixact_freeze_max_age as member space
utilization increases. This makes autovacuum more aggressive and also
reduces the threshold for a manual VACUUM to perform a full-table scan.
This patch leaves unsolved the problem of ensuring that emergency
autovacuums are triggered even when autovacuum=off. We'll need to fix
that via a separate patch.
Thomas Munro and Robert Haas
The old formula didn't have enough parentheses, so it would do the wrong
thing, and it used / rather than % to find a remainder. The effect of
these oversights is that the stop point chosen by the logic introduced in
commit b69bf30b9b might be rather
meaningless.
Thomas Munro, reviewed by Kevin Grittner, with a whitespace tweak by me.
Otherwise, if there's another crash, some writes from after the first
crash might make it to disk while writes from before the crash fail
to make it to disk. This could lead to data corruption.
Back-patch to all supported versions.
Abhijit Menon-Sen, reviewed by Andres Freund and slightly revised
by me.
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
We need to create the pg_multixact/offsets file deleted by pg_upgrade
much earlier than we originally were: it was in TrimMultiXact(), which
runs after we exit recovery, but it actually needs to run earlier than
the first call to SetMultiXactIdLimit (before recovery), because that
routine already wants to read the first offset segment.
Per pg_upgrade trouble report from Jeff Janes.
While at it, silence a compiler warning about a pointless assert that an
unsigned variable was being tested non-negative. This was a signed
constant in Thomas Munro's patch which I changed to unsigned before
commit. Pointed out by Andres Freund.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
Multixact member files are subject to early wraparound overflow and
removal: if the average multixact size is above a certain threshold (see
note below) the protections against offset overflow are not enough:
during multixact truncation at checkpoint time, some
pg_multixact/members files would be removed because the server considers
them to be old and not needed anymore. This leads to loss of files that
are critical to interpret existing tuples's Xmax values.
To protect against this, since we don't have enough info in pg_control
and we can't modify it in old branches, we maintain shared memory state
about the oldest value that we need to keep; we use this during new
multixact creation to abort if an old still-needed file would get
overwritten. This value is kept up to date by checkpoints, which makes
it not completely accurate but should be good enough. We start emitting
warnings sometime earlier, so that the eventual multixact-shutdown
doesn't take DBAs completely by surprise (more precisely: once 20
members SLRU segments are remaining before shutdown.)
On troublesome average multixact size: The threshold size depends on the
multixact freeze parameters. The oldest age is related to the greater of
multixact_freeze_table_age and multixact_freeze_min_age: anything
older than that should be removed promptly by autovacuum. If autovacuum
is keeping up with multixact freezing, the troublesome multixact average
size is
(2^32-1) / Max(freeze table age, freeze min age)
or around 28 members per multixact. Having an average multixact size
larger than that will eventually cause new multixact data to overwrite
the data area for older multixacts. (If autovacuum is not able to keep
up, or there are errors in vacuuming, the actual maximum is
multixact_freeeze_max_age instead, at which point multixact generation
is stopped completely. The default value for this limit is 400 million,
which means that the multixact size that would cause trouble is about 10
members).
Initial bug report by Timothy Garnett, bug #12990
Backpatch to 9.3, where the problem was introduced.
Authors: Álvaro Herrera, Thomas Munro
Reviews: Thomas Munro, Amit Kapila, Robert Haas, Kevin Grittner
When the startup process recovers transactions by scanning pg_twophase
directory, it should clear MyLockedGxact after it's done processing each
transaction. Like we do during normal operation, at PREPARE TRANSACTION.
Otherwise, if the startup process exits due to an error, it will try to
clear the locking_backend field of the last recovered transaction. That's
usually harmless, but if the error happens in MarkAsPreparing, while
holding TwoPhaseStateLock, the shmem-exit hook will try to acquire
TwoPhaseStateLock again, and deadlock with itself.
This fixes bug #13128 reported by Grant McAlister. The bug was introduced
by commit bb38fb0d, so backpatch to all supported versions like that
commit.
After the WAL format changes, the calculation of the size of a checkpoint
record became incorrect. Instead of trying to fix the math, check that the
previous record, i.e. the xl_prev value that we'd write for the next
record, matches the last checkpoint's redo pointer. That way it's not
dependent on the size of the checkpoint record at all.
The old logic was actually slightly wrong all along: if the previous
checkpoint record crossed a page boundary, the page headers threw off the
record size calculation, and the checkpoint was not skipped. The new
checkpoint would not cross a page boundary, so this only resulted in at
most one extra checkpoint after the system became idle. The new logic fixes
that. (It's not worth fixing in backbranches).
However, it makes some sense to try to keep the latest checkpoint contained
fully in a page, or at least in a single WAL segment, just on general
robustness grounds. If something goes awfully wrong, it's more likely that
you can recover the latest WAL segment, than the last two WAL segments. So
I added an extra check that the checkpoint is not skipped if the previous
checkpoint crossed a WAL segment.
Reported by Jeff Janes.
SLRU_SEGMENTS_PER_PAGE -> SLRU_PAGES_PER_SEGMENT
I introduced this ancient typo in subtrans.c and later propagated it to
multixact.c. I fixed the latter in f741300c, but only back to 9.3;
backpatch to all supported branches for consistency.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
Commit 2c03216 changed allocate_recordbuf() so that it uses a palloc to
allocate the read buffer and fails immediately when an out-of-memory error
shows up, even though its callers still expect that NULL is returned in that
case. This bug is fixed making allocate_recordbuf() use a palloc_extended
with MCXT_ALLOC_NO_OOM flag and return NULL in OOM case.
Michael Paquier
In 83ff1618 we defined integer limits iff they're not provided by the
system. That turns out not to be the greatest idea because there's
different ways some datatypes can be represented. E.g. on OSX PG's 64bit
datatype will be a 'long int', but OSX unconditionally uses 'long
long'. That disparity then can lead to warnings, e.g. around printf
formats.
One way to fix that would be to back int64 using stdint.h's
int64_t. While a good idea it's not that easy to implement. We would
e.g. need to include stdint.h in our external headers, which we don't
today. Also computing the correct int64 printf formats in that case is
nontrivial.
Instead simply prefix the integer limits with PG_ and define them
unconditionally. I've adjusted all the references to them in code, but
not the ones in comments; the latter seems unnecessary to me.
Discussion: 20150331141423.GK4878@alap3.anarazel.de
This improves on commit bbfd7edae5 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
Several submitted and even committed patches have run into the problem
that C89, our baseline, does not provide minimum/maximum values for
various integer datatypes. C99's stdint.h does, but we can't rely on
it.
Several parts of the code defined limits locally, so instead centralize
the definitions to c.h.
This patch also changes the more obvious usages of literal limit values;
there's more places that could be changed, but it's less clear whether
it's beneficial to change those.
Author: Andrew Gierth
Discussion: 87619tc5wc.fsf@news-spur.riddles.org.uk
Recovery delays are implemented by waiting on a latch, and latches take
milliseconds as a parameter. The required amount of waiting was computed
using microsecond resolution though and the wait loop's abort condition
was checking the delay in microseconds as well. This could lead to
short spurts of busy looping when the overall wait time was below a
millisecond, but above 0 microseconds.
Instead just formulate the wait loop's abort condition in millisecond
granularity as well. Given that that's recovery_min_apply_delay
resolution, it seems harmless to not wait for less than a millisecond.
Backpatch to 9.4 where recovery_min_apply_delay was introduced.
Discussion: 20150323141819.GH26995@alap3.anarazel.de
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: 20150220152150.GD4149@awork2.anarazel.de,
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
The introduction of min_wal_size & max_wal_size in 88e9823026 makes it
feasible to increase the default upper bound in checkpoint
size. Previously raising the default would lead to a increased disk
footprint, even if more segments weren't beneficial. The low default of
checkpoint size is one of common performance problem users have thus
increasing the default makes sense. Setups where the increase in
maximum disk usage is a problem will very likely have to run with a
modified configuration anyway.
Discussion: 54F4EFB8.40202@agliodbs.com,
CA+TgmoZEAgX5oMGJOHVj8L7XOkAe05Gnf45rP40m-K3FhZRVKg@mail.gmail.com
Author: Josh Berkus, after a discussion involving lots of people.
The new recovery_target_action (introduced in aedccb1f6/b8e33a85d4)
replaces it's functionality. Having both seems likely to cause more
confusion than it saves worry due to the incompatibility.
Discussion: 5484FC53.2060903@2ndquadrant.com
Author: Petr Jelinek
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
When newly-added GUC parameter, wal_compression, is on, the PostgreSQL server
compresses a full page image written to WAL when full_page_writes is on or
during a base backup. A compressed page image will be decompressed during WAL
replay. Turning this parameter on can reduce the WAL volume without increasing
the risk of unrecoverable data corruption, but at the cost of some extra CPU
spent on the compression during WAL logging and on the decompression during
WAL replay.
This commit changes the WAL format (so bumping WAL version number) so that
the one-byte flag indicating whether a full page image is compressed or not is
included in its header information. This means that the commit increases the
WAL volume one-byte per a full page image even if WAL compression is not used
at all. We can save that one-byte by borrowing one-bit from the existing field
like hole_offset in the header and using it as the flag, for example. But which
would reduce the code readability and the extensibility of the feature.
Per discussion, it's not worth paying those prices to save only one-byte, so we
decided to add the one-byte flag to the header.
This commit doesn't introduce any new compression algorithm like lz4.
Currently a full page image is compressed using the existing PGLZ algorithm.
Per discussion, we decided to use it at least in the first version of the
feature because there were no performance reports showing that its compression
ratio is unacceptably lower than that of other algorithm. Of course,
in the future, it's worth considering the support of other compression
algorithm for the better compression.
Rahila Syed and Michael Paquier, reviewed in various versions by myself,
Andres Freund, Robert Haas, Abhijit Menon-Sen and many others.
We allow this module to be turned off on restarts, so a restart time
check is enough to activate or deactivate the module; however, if there
is a standby replaying WAL emitted from a master which is restarted, but
the standby isn't, the state in the standby becomes inconsistent and can
easily be crashed.
Fix by activating and deactivating the module during WAL replay on
parameter change as well as on system start.
Problem reported by Fujii Masao in
http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com
Author: Petr Jelínek
This makes it easier to write frontend programs that needs to understand
the WAL record format of CREATE/DROP DATABASE. dbcommands.h cannot easily
be #included in a frontend program, because it pulls in other header files
that need backend stuff, but the new dbcommands_xlog.h header file has
fewer dependencies.
Up to now RecordTransactionCommit() waited for WAL to be flushed (if
synchronous_commit != off) and to be synchronously replicated (if
enabled), even if a transaction did not have a xid assigned. The primary
reason for that is that sequence's nextval() did not assign a xid, but
are worthwhile to wait for on commit.
This can be problematic because sometimes read only transactions do
write WAL, e.g. HOT page prune records. That then could lead to read only
transactions having to wait during commit. Not something people expect
in a read only transaction.
This lead to such strange symptoms as backends being seemingly stuck
during connection establishment when all synchronous replicas are
down. Especially annoying when said stuck connection is the standby
trying to reconnect to allow syncrep again...
This behavior also is involved in a rather complicated <= 9.4 bug where
the transaction started by catchup interrupt processing waited for
syncrep using latches, but didn't get the wakeup because it was already
running inside the same overloaded signal handler. Fix the issue here
doesn't properly solve that issue, merely papers over the problems. In
9.5 catchup interrupts aren't processed out of signal handlers anymore.
To fix all this, make nextval() acquire a top level xid, and only wait for
transaction commit if a transaction both acquired a xid and emitted WAL
records. If only a xid has been assigned we don't uselessly want to
wait just because of writes to temporary/unlogged tables; if only WAL
has been written we don't want to wait just because of HOT prunes.
The xid assignment in nextval() is unlikely to cause overhead in
real-world workloads. For one it only happens SEQ_LOG_VALS/32 values
anyway, for another only usage of nextval() without using the result in
an insert or similar is affected.
Discussion: 20150223165359.GF30784@awork2.anarazel.de,
369698E947874884A77849D8FE3680C2@maumau,
5CF4ABBA67674088B3941894E22A0D25@maumau
Per complaint from maumau and Thom Brown
Backpatch all the way back; 9.0 doesn't have syncrep, but it seems
better to be consistent behavior across all maintained branches.
Instead of having a single knob (checkpoint_segments) that both triggers
checkpoints, and determines how many checkpoints to recycle, they are now
separate concerns. There is still an internal variable called
CheckpointSegments, which triggers checkpoints. But it no longer determines
how many segments to recycle at a checkpoint. That is now auto-tuned by
keeping a moving average of the distance between checkpoints (in bytes),
and trying to keep that many segments in reserve. The advantage of this is
that you can set max_wal_size very high, but the system won't actually
consume that much space if there isn't any need for it. The min_wal_size
sets a floor for that; you can effectively disable the auto-tuning behavior
by setting min_wal_size equal to max_wal_size.
The max_wal_size setting is now the actual target size of WAL at which a
new checkpoint is triggered, instead of the distance between checkpoints.
Previously, you could calculate the actual WAL usage with the formula
"(2 + checkpoint_completion_target) * checkpoint_segments + 1". With this
patch, you set the desired WAL usage with max_wal_size, and the system
calculates the appropriate CheckpointSegments with the reverse of that
formula. That's a lot more intuitive for administrators to set.
Reviewed by Amit Kapila and Venkata Balaji N.
Previously when the standby server failed to retrieve WAL files from any sources
(i.e., streaming replication, local pg_xlog directory or WAL archive), it always
waited for five seconds (hard-coded) before the next attempt. For example,
this is problematic in warm-standby because restore_command can fail
every five seconds even while new WAL file is expected to be unavailable for
a long time and flood the log files with its error messages.
This commit adds new parameter, wal_retrieve_retry_interval, to control that
wait time.
Alexey Vasiliev and Michael Paquier, reviewed by Andres Freund and me.
The flag is supposed to be copied from the record. Same issue with
track_commit_timestamps, but that's master-only.
Report and fix by Petr Jalinek. Backpatch to 9.4, where wal_log_hints was
added.
Since commit ba94518a, we used XLogFileOpen to open the next segment for
writing, but if the end-of-recovery happens exactly at a segment boundary,
the new segment might not exist yet. (Before ba94518a, XLogFileOpen was
correct, because we would open the previous segment if the switch happened
at the boundary.)
Instead of trying to create it if necessary, it's simpler to not bother
opening the segment at all. XLogWrite() will open or create it soon anyway,
after writing the checkpoint or end-of-recovery record.
Reported by Andres Freund.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
Rename parameter action_at_recovery_target to
recovery_target_action suggested by Christoph Berg.
Place into recovery.conf suggested by Fujii Masao,
replacing (deprecating) earlier parameters, per
Michael Paquier.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
InitXLogInsert() cannot be called in a critical section, because it
allocates memory. But CreateCheckPoint() did that, when called for the
end-of-recovery checkpoint by the startup process.
In the passing, fix the scratch space allocation in InitXLogInsert to go to
the right memory context. Also update the comment at InitXLOGAccess, which
hasn't been totally accurate since hot standby was introduced (in a hot
standby backend, InitXLOGAccess isn't called at backend startup).
Reported by Michael Paquier
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
Now that the backup blocks are appended to the WAL record in xloginsert.c,
XLogInsert doesn't see them anymore and cannot remove them from the version
reconstructed for xlog_outdesc. This makes running with wal_debug=on more
expensive, as we now make (unnecessary) temporary copies of the backup
blocks, but it doesn't seem worth convoluting the code to keep that
optimization.
Reported by Alvaro Herrera.
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
Instead of initializing a new TransInvalidationInfo for every
transaction or subtransaction, we can just do it for those
transactions or subtransactions that actually need to queue
invalidation messages. That also avoids needing to free those
entries at the end of a transaction or subtransaction that does
not generate any invalidation messages, which is by far the
common case.
Patch by me. Review by Simon Riggs and Andres Freund.
Previously the archive recovery always created .ready file for
the last WAL file of the old timeline at the end of recovery even when
it's restored from the archive and has .done file. That is, there was
the case where the WAL file had both .ready and .done files.
This caused the already-archived WAL file to be archived again.
This commit prevents the archive recovery from creating .ready file
for the last WAL file if it has .done file, in order to prevent it from
being archived again.
This bug was added when cascading replication feature was introduced,
i.e., the commit 5286105800.
So, back-patch to 9.2, where cascading replication was added.
Reviewed by Michael Paquier
The duplication originated in cdd46c765, where restartpoints were
introduced.
In LogCheckpointStart's case the duplication actually lead to the
compiler's format string checking not to be effective because the
format string wasn't constant.
Arguably these messages shouldn't be elog(), but ereport() style
messages. That'd even allow to translate the messages... But as
there's more mistakes of that kind in surrounding code, it seems
better to change that separately.
Commit 7dbb606938 added a new CHECKPOINT_FLUSH_ALL flag. As that
commit needed to be backpatched I didn't change the numeric values of
the existing flags as that could lead to nastly problems if any
external code issued checkpoints. That's not a concern on master, so
renumber them there.
Also add a comment about CHECKPOINT_FLUSH_ALL above
CreateCheckPoint().
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
As noted in http://bugs.debian.org/763098 there is a conflict between
postgres' definition of CACHE_LINE_SIZE and the definition by various
*bsd platforms. It's debatable who has the right to define such a
name, but postgres' use was only introduced in 375d8526f2 (9.4), so
it seems like a good idea to rename it.
Discussion: 20140930195756.GC27407@msg.df7cb.de
Per complaint of Christoph Berg in the above email, although he's not
the original bug reporter.
Backpatch to 9.4 where the define was introduced.
For the reason outlined in df4077cda2 also remove volatile qualifiers
from xlog.c. Some of these uses of volatile have been added after
noticing problems back when spinlocks didn't imply compiler
barriers. So they are a good test - in fact removing the volatiles
breaks when done without the barriers in spinlocks present.
Several uses of volatile remain where they are explicitly used to
access shared memory without locks. These locations are ok with
slightly out of date data, but removing the volatile might lead to the
variables never being reread from memory. These uses could also be
replaced by barriers, but that's a separate change of doubtful value.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
strncmp() is a specialized API unsuited for routine copying into
fixed-size buffers. On a system where the length of a single filename
can exceed MAXPGPATH, the pg_archivecleanup change prevents a simple
crash in the subsequent strlen(). Few filesystems support names that
long, and calling pg_archivecleanup with untrusted input is still not a
credible use case. Therefore, no back-patch.
David Rowley
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
Commit 0ac5ad5134 removed an optimization in multixact.c that skipped
fetching members of MultiXactId that were older than our
OldestVisibleMXactId value. The reason this was removed is that it is
possible for multixacts that contain updates to be older than that
value. However, if the caller is certain that the multi does not
contain an update (because the infomask bits say so), it can pass this
info down to GetMultiXactIdMembers, enabling it to use the old
optimization.
Pointed out by Andres Freund in 20131121200517.GM7240@alap2.anarazel.de
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
Nothing in the checkpointer calls InitXLOGAccess(), so WALInsertLocks
never got initialized there. Without EXEC_BACKEND, it works anyway
because the correct value is inherited from the postmaster, but
with EXEC_BACKEND we've got a problem. The problem appears to have
been introduced by commit 68a2e52bba.
To fix, move the relevant initialization steps from InitXLOGAccess()
to XLOGShmemInit(), making this more parallel to what we do
elsewhere.
Amit Kapila
The assertion failed if WAL_DEBUG or LWLOCK_STATS was enabled; fix that by
using separate memory contexts for the allocations made within those code
blocks.
This patch introduces a mechanism for marking any memory context as allowed
in a critical section. Previously ErrorContext was exempt as a special case.
Instead of a blanket exception of the checkpointer process, only exempt the
memory context used for the pending ops hash table.
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134.
Change the order of checks in similar functions to be the same; remove
a parameter that's not needed anymore; rename a memory context and
expand a couple of comments.
Per review comments from Amit Kapila
In a50d976254 I already changed this, but got it wrong for the case
where the number of members is larger than the number of entries that
fit in the last page of the last segment.
As reported by Serge Negodyuck in a followup to bug #8673.
It's critical that the backend's idea of LOBLKSIZE match the way data has
actually been divided up in pg_largeobject. While we don't provide any
direct way to adjust that value, doing so is a one-line source code change
and various people have expressed interest recently in changing it. So,
just as with TOAST_MAX_CHUNK_SIZE, it seems prudent to record the value in
pg_control and cross-check that the backend's compiled-in setting matches
the on-disk data.
Also tweak the code in inv_api.c so that fetches from pg_largeobject
explicitly verify that the length of the data field is not more than
LOBLKSIZE. Formerly we just had Asserts() for that, which is no protection
at all in production builds. In some of the call sites an overlength data
value would translate directly to a security-relevant stack clobber, so it
seems worth one extra runtime comparison to be sure.
In the back branches, we can't change the contents of pg_control; but we
can still make the extra checks in inv_api.c, which will offer some amount
of protection against running with the wrong value of LOBLKSIZE.
Previously there's been a mix between 'slotname' and 'slot_name'. It's
not nice to be unneccessarily inconsistent in a new feature. As a post
beta1 initdb now is required in the wake of eeca4cd35e, fix the
inconsistencies.
Most the changes won't affect usage of replication slots because the
majority of changes is around function parameter names. The prominent
exception to that is that the recovery.conf parameter
'primary_slotname' is now named 'primary_slot_name'.
transam/README explained how B-tree incomplete splits were tracked and
fixed after recovery, as an example of handling complex actions that need
multiple WAL records, but that's not how it works anymore. Explain the new
paradigm.
Commit dd428c79 added dbId and tsId to the xl_xact_commit struct but missed
that prepared transaction commits reuse that struct. Fix that.
Because those fields were left unitialized, replaying a commit prepared WAL
record in a hot standby node would fail to remove the relcache init file.
That can lead to "could not open file" errors on the standby. Relcache init
file only needs to be removed when a system table/index is rewritten in the
transaction using two phase commit, so that should be rare in practice. In
HEAD, the incorrect dbId/tsId values are also used for filtering in logical
replication code, causing the transaction to always be filtered out.
Analysis and fix by Andres Freund. Backpatch to 9.0 where hot standby was
introduced.
To lock a prepared transaction's shared memory entry, we used to mark it
with the XID of the backend. When the XID was no longer active according
to the proc array, the entry was implicitly considered as not locked
anymore. However, when preparing a transaction, the backend's proc array
entry was cleared before transfering the locks (and some other state) to
the prepared transaction's dummy PGPROC entry, so there was a window where
another backend could finish the transaction before it was in fact fully
prepared.
To fix, rewrite the locking mechanism of global transaction entries. Instead
of an XID, just have simple locked-or-not flag in each entry (we store the
locking backend's backend id rather than a simple boolean, but that's just
for debugging purposes). The backend is responsible for explicitly unlocking
the entry, and to make sure that that happens, install a callback to unlock
it on abort or process exit.
Backpatch to all supported versions.
Per discussion, this seems like a more consistent choice of name.
Fabrízio de Royes Mello, after a suggestion by Peter Eisentraut;
some additional documentation wordsmithing by me
Commit a730183926 created rather a mess by
putting dependencies on backend-only include files into include/common.
We really shouldn't do that. To clean it up:
* Move TABLESPACE_VERSION_DIRECTORY back to its longtime home in
catalog/catalog.h. We won't consider this symbol part of the FE/BE API.
* Push enum ForkNumber from relfilenode.h into relpath.h. We'll consider
relpath.h as the source of truth for fork numbers, since relpath.c was
already partially serving that function, and anyway relfilenode.h was
kind of a random place for that enum.
* So, relfilenode.h now includes relpath.h rather than vice-versa. This
direction of dependency is fine. (That allows most, but not quite all,
of the existing explicit #includes of relpath.h to go away again.)
* Push forkname_to_number from catalog.c to relpath.c, just to centralize
fork number stuff a bit better.
* Push GetDatabasePath from catalog.c to relpath.c; it was rather odd
that the previous commit didn't keep this together with relpath().
* To avoid needing relfilenode.h in common/, redefine the underlying
function (now called GetRelationPath) as taking separate OID arguments,
and make the APIs using RelFileNode or RelFileNodeBackend into macro
wrappers. (The macros have a potential multiple-eval risk, but none of
the existing call sites have an issue with that; one of them had such a
risk already anyway.)
* Fix failure to follow the directions when "init" fork type was added;
specifically, the errhint in forkname_to_number wasn't updated, and neither
was the SGML documentation for pg_relation_size().
* Fix tablespace-path-too-long check in CreateTableSpace() to account for
fork-name component of maximum-length pathnames. This requires putting
FORKNAMECHARS into a header file, but it was rather useless (and
actually unreferenced) where it was.
The last couple of items are potentially back-patchable bug fixes,
if anyone is sufficiently excited about them; but personally I'm not.
Per a gripe from Christoph Berg about how include/common wasn't
self-contained.
As noted some time ago, the original coding had a typo ("|" for "^")
that made the result less unique than intended. Even the intended
behavior is obsolete since it was based on wanting to produce a
usable value even if we didn't have int64 arithmetic --- a limitation
we stopped supporting years ago. Instead, let's redefine the system
identifier as tv_sec in the upper 32 bits (same as before), tv_usec
in the next 20 bits, and the low 12 bits of getpid() in the remaining
bits. This is still hardly guaranteed-universally-unique, but it's
noticeably better than before. Per my proposal at
<29019.1374535940@sss.pgh.pa.us>
If a tuple is locked, and this lock is later upgraded either to an
update or to a stronger lock, and in the meantime some other process
tries to lock, update or delete the same tuple, it (the tuple) could end
up being updated twice, or having conflicting locks held.
The reason for this is that the second updater checks for a change in
Xmax value, or in the HEAP_XMAX_IS_MULTI infomask bit, after noticing
the first lock; and if there's a change, it restarts and re-evaluates
its ability to update the tuple. But it neglected to check for changes
in lock strength or in lock-vs-update status when those two properties
stayed the same. This would lead it to take the wrong decision and
continue with its own update, when in reality it shouldn't do so but
instead restart from the top.
This could lead to either an assertion failure much later (when a
multixact containing multiple updates is detected), or duplicate copies
of tuples.
To fix, make sure to compare the other relevant infomask bits alongside
the Xmax value and HEAP_XMAX_IS_MULTI bit, and restart from the top if
necessary.
Also, in the belt-and-suspenders spirit, add a check to
MultiXactCreateFromMembers that a multixact being created does not have
two or more members that are claimed to be updates. This should protect
against other bugs that might cause similar bogus situations.
Backpatch to 9.3, where the possibility of multixacts containing updates
was introduced. (In prior versions it was possible to have the tuple
lock upgraded from shared to exclusive, and an update would not restart
from the top; yet we're protected against a bug there because there's
always a sleep to wait for the locking transaction to complete before
continuing to do anything. Really, the fact that tuple locks always
conflicted with concurrent updates is what protected against bugs here.)
Per report from Andrew Dunstan and Josh Berkus in thread at
http://www.postgresql.org/message-id/534C8B33.9050807@pgexperts.com
Bug analysis by Andres Freund.
Once we've completed a PREPARE, our session is not running a transaction,
so its entry in pg_stat_activity should show xact_start as null, rather
than leaving the value as the start time of the now-prepared transaction.
I think possibly this oversight was triggered by faulty extrapolation
from the adjacent comment that says PrepareTransaction should not call
AtEOXact_PgStat, so tweak the wording of that comment.
Noted by Andres Freund while considering bug #10123 from Maxim Boguk,
although this error doesn't seem to explain that report.
Back-patch to all active branches.
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
GetVirtualXIDsDelayingChkpt calls palloc, which isn't safe in a critical
section. I thought I covered this case with the exemption for the
checkpointer, but CreateCheckPoint is also called from the startup process.
If you compile with WAL_DEBUG and enable it with wal_debug=on, we used to
only pass the first XLogRecData entry to the rm_desc routine. I think the
original assumprion was that the first XLogRecData entry contains all the
necessary information for the rm_desc routine, but that's a pretty shaky
assumption. At least standby_redo didn't get the memo.
To fix, piece together all the data in a temporary buffer, and pass that to
the rm_desc routine.
It's been like this forever, but the patch didn't apply cleanly to
back-branches. Probably wouldn't be hard to fix the conflicts, but it's
not worth the trouble.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Reviewed by Andres Freund.
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
A fake relcache entry can "own" a SmgrRelation object, like a regular
relcache entry. But when it was free'd, the owner field in SmgrRelation
was not cleared, so it was left pointing to free'd memory.
Amazingly this apparently hasn't caused crashes in practice, or we would've
heard about it earlier. Andres found this with Valgrind.
Report and fix by Andres Freund, with minor modifications by me. Backpatch
to all supported versions.
CheckRequiredParameterValues() should perform the checks if archive recovery
was requested, even if we are going to perform crash recovery first.
Reported by Kyotaro HORIGUCHI. Backpatch to 9.2, like the crash-then-archive
recovery mode.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
This feature, building on previous commits, allows the write-ahead log
stream to be decoded into a series of logical changes; that is,
inserts, updates, and deletes and the transactions which contain them.
It is capable of handling decoding even across changes to the schema
of the effected tables. The output format is controlled by a
so-called "output plugin"; an example is included. To make use of
this in a real replication system, the output plugin will need to be
modified to produce output in the format appropriate to that system,
and to perform filtering.
Currently, information can be extracted from the logical decoding
system only via SQL; future commits will add the ability to stream
changes via walsender.
Andres Freund, with review and other contributions from many other
people, including Álvaro Herrera, Abhijit Menon-Sen, Peter Gheogegan,
Kevin Grittner, Robert Haas, Heikki Linnakangas, Fujii Masao, Abhijit
Menon-Sen, Michael Paquier, Simon Riggs, Craig Ringer, and Steve
Singer.
Tom Lane
Magnus Hagander
Stephen Frost
Simon Riggs
Robert Haas
Peter Eisentraut
Bruce Momjian
Fujii Masao
Andres Freund
Teodor Sigaev
Alvaro Herrera
Noah Misch
Heikki Linnakangas
Andrew Dunstan
Greg Stark
Kevin Grittner
Joe Conway