will downcase the supplied field name unless it is double-quoted. Also,
upgrade the routine's handling of double quotes to match the backend,
in particular support doubled double quotes within quoted identifiers.
Per pgsql-interfaces discussion a couple weeks ago.
of function bodies is done at CREATE FUNCTION time. This is normally
true but can be set false to avoid problems with forward references,
wrong schema search path, etc. This is just the backend patch, still
need to adjust pg_dump to make use of it.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
> > a) Write documentation how the win32 console needs to be set up so that
> > psql can handle 8-bit characters.
> > Where should it be added? The Section "Installation on Windows" in the
> > Administrator's Guide seems natural to me.
> >
> > b) Add code to psql that prints a warning on startup of psql when the
> > console codepage differs from the windows codepage, something like
> >
> > Warning: Console codepage (850) differs from windows codepage (1252)
> > 8-bit characters will not work correctly. See PostgreSQL
> > documentation "Installation on Windows" for details.
>
Attached are two patches:
- installdoc.patch contains an additional paragraph on the win32 console
codepage for the chapter "Installation on Windows"
Due to a lack of SGML-tools, I have only edited the text and not tested
the SGML code - please check it before merging into the CVS branch.
- psqlcodepage.patch adds the warning about a problematic codepage to psql.
Christoph Dalitz
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
to control object ownership. The use-set-session-authorization and
no-reconnect switches are obsolete (still accepted on the command line,
but they don't do anything). This is a precursor to fixing handling
of CREATE SCHEMA, which will be a separate commit.
Per recent discussion, this does not work because other backends can't
reliably see tuples in a temp table and so cannot run the RI checks
correctly. Seems better to disallow this case than go back to accessing
temp tables through shared buffers. Also, disallow FK references to
ON COMMIT DELETE ROWS tables. We already caught this problem for normal
TRUNCATE, but the path used by ON COMMIT didn't check.
comments/examples in pg_hba.conf. This patch remedies that, adds a brief
explanation of the connection types, and adds a missing period in the
docs.
Jon Jensen
Use question marks rather than brackets to delimit optional elements in
Tcl synopses.
Fix stylesheet misfeature leading to excessively long cross-reference text
when linking to a different "part".
Remove <body> attributes -- CSS stylesheets should handle that.
Improve bibliography formatting.
Add fast-forward links for more convenient navigation.
sequence every time it's called is bogus --- it interferes with user
control over the seed, and actually decreases randomness overall
(because a seed based on time(NULL) is pretty predictable). If you really
want a reproducible result from geqo, do 'set seed = 0' before planning
a query.
libpq, talking to an old server, should assume SQL_ASCII as the default
client encoding, because that is what the server will actually use (not
the server encoding).
spelling mistake in the PREPARE ref page (2) Makes some
English more consistent, in the ref pages for some of the
client apps (3) Adds a link to the libpq docs in the
vacuumdb ref page.
Neil Conway
have cursors that might outlive their creating transactions. A
patch is attached that fixes this (suggestions on better wording
are welcome).
Neil Conway
via extended query protocol, because it sends Sync right after Execute
without realizing that the command to be executed is COPY. There seems
to be no reasonable way for it to realize that, either, so the best fix
seems to be to make the backend ignore Sync during copy-in mode. Bit of
a wart on the protocol, but little alternative. Also, libpq must send
another Sync after terminating the COPY, if the command was issued via
Execute.
libpq users to perform Bind/Execute of previously prepared statements.
Per yesterday's discussion, this offers enough performance improvement
to justify bending the 'no new features during beta' rule.
he supplied a few months ago, but didn't get around to docing until now. And
he also added some doc for calling stored functions in general from jdbc that was missing.
Modified Files:
sgml/jdbc.sgml
heuristic determination of day vs month in date/time input. Add the
ability to specify that input is interpreted as yy-mm-dd order (which
formerly worked, but only for yy greater than 31). DateStyle's input
component now has the preferred spellings DMY, MDY, or YMD; the older
keywords European and US are now aliases for the first two of these.
Per recent discussions on pgsql-general.
>>ISTM that "source" is worth knowing.
>
> Hm, possibly. Any other opinions?
This version has the seven fields I proposed, including "source". Here's
an example that shows why I think it's valuable:
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | on
context | user
vartype | bool
source | default
min_val |
max_val |
regression=# update pg_settings set setting = 'off' where name =
'enable_seqscan';
-[ RECORD 1 ]---
set_config | off
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | session
min_val |
max_val |
regression=# alter user postgres set enable_seqscan to 'off';
ALTER USER
(log out and then back in again)
regression=# \x
Expanded display is on.
regression=# select * from pg_settings where name = 'enable_seqscan';
-[ RECORD 1 ]-----------
name | enable_seqscan
setting | off
context | user
vartype | bool
source | user
min_val |
max_val |
In the first case, enable_seqscan is set to its default value. After
setting it to off, it is obvious that the value has been changed for the
session only. In the third case, you can see that the value has been set
specifically for the user.
Joe Conway
psql4win32.patch - changes in the psql source code
psql-ref.patch - changes in the documentation psql-ref.sgml
(for new builtin variable WIN32_CONSOLE)
To apply them use "patch -p 1" in the root directory of the
postgres source directory.
These patches fix the following problems of psql on Win32
(all changes only have effect #ifdef WIN32):
a) Problem: Static library libpq.a did not work
Solution: Added WSAStartup() in fe-connect.c
b) Problem: Secret Password was echoed by psql
Solution: Password echoing disabled in sprompt.c
c) Problem: 8bit characters were displayed/interpreted wrong in psql
This is due to the fact that the Win32 "console" uses a
different encoding than the rest of the Windows system
Solution: Introduced a new psql variable WIN32_CONSOLE
When set with "\set WIN32_console", the function OemToChar()
is applied after reading input and CharToOem() before
displaying Output
Christoph Dalitz
modes (and replace the requiressl boolean). The four options were first
spelled out by Magnus Hagander <mha@sollentuna.net> on 2000-08-23 in email
to pgsql-hackers, archived here:
http://archives.postgresql.org/pgsql-hackers/2000-08/msg00639.php
My original less-flexible patch and the ensuing thread are archived at:
http://dbforums.com/t623845.html
Attached is a new patch, including documentation.
To sum up, there's a new client parameter "sslmode" and environment
variable "PGSSLMODE", with these options:
sslmode description
------- -----------
disable Unencrypted non-SSL only
allow Negotiate, prefer non-SSL
prefer Negotiate, prefer SSL (default)
require Require SSL
The only change to the server is a new pg_hba.conf line type,
"hostnossl", for specifying connections that are not allowed to use SSL
(for example, to prevent servers on a local network from accidentally
using SSL and wasting cycles). Thus the 3 pg_hba.conf line types are:
pg_hba.conf line types
----------------------
host applies to either SSL or regular connections
hostssl applies only to SSL connections
hostnossl applies only to regular connections
These client and server options, the postgresql.conf ssl = false option,
and finally the possibility of compiling with no SSL support at all,
make quite a range of combinations to test. I threw together a test
script to try many of them out. It's in a separate tarball with its
config files, a patch to psql so it'll announce SSL connections even in
absence of a tty, and the test output. The test is especially informative
when run on the same tty the postmaster was started on, so the FATAL:
errors during negotiation are interleaved with the psql client output.
I saw Tom write that new submissions for 7.4 have to be in before midnight
local time, and since I'm on the east coast in the US, this just makes it
in before the bell. :)
Jon Jensen
> Well, no. What it says is that certain values must be escaped (but
> doesn't say which ones). Then it says there are alternate escape
> sequences for some values, which it lists.
>
> It doesn't say "The following table contains the characters which must
> be escaped:", which would be much clearer (and actually useful).
Attached documentation patch updates the wording for bytea input
escaping, per complaint by Stephen Norris above.
Joe Conway
for the sign of timezone offsets, ie, positive is east from UTC. These
were previously out of step with other operations that accept or show
timezones, such as I/O of timestamptz values.
and 100 respectively, if the platform will allow it. initdb selects
values that are not too large to allow the postmaster to start, and
places these values in the installed postgresql.conf file. This allows
us to continue to start up out-of-the-box on platforms with small SHMMAX,
while having somewhat-realistic default settings on platforms with
reasonable SHMMAX. Per recent pghackers discussion.
without needing a running backend. Reorder postgresql.conf.sample
to match new layout of runtime.sgml. This commit re-adds work lost
in Wednesday's crash.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
client-side AUTOCOMMIT mode now: '\set AUTOCOMMIT off' supports
SQL-spec commit behavior. Get rid of LO_TRANSACTION hack --- the
LO operations just work now, using libpq's ability to track the
transaction status. Add a VERBOSE variable to control verboseness
of error message display, and add a %T prompt-string code to show
current transaction-block status. Superuser state display in the
prompt string correctly follows SET SESSION AUTHORIZATION commands.
Control-C works to get out of COPY IN state.
comparison functions), replacing the highly bogus bitwise array_eq. Create
a btree index opclass for ANYARRAY --- it is now possible to create indexes
on array columns.
Arrange to cache the results of catalog lookups across multiple array
operations, instead of repeating the lookups on every call.
Add string_to_array and array_to_string functions.
Remove singleton_array, array_accum, array_assign, and array_subscript
functions, since these were for proof-of-concept and not intended to become
supported functions.
Minor adjustments to behavior in some corner cases with empty or
zero-dimensional arrays.
Joe Conway (with some editorializing by Tom Lane).
identifier, while some areas do not.
The attached converts be below to "name":
conversion_name
index_name
The below have an existing, initdb supplied, entity named "name". As
such, it could be confusing for the reader to see that identifier used
in the example.
domainname
typename
Rod Taylor
with advocacy and 'portal' websites.
Link to createdb / dropdb from the tutorial page about create / dropdb.
A pair of notes were asking about more info...
Rod Taylor
Regression tests for IPv6 operations added.
Documentation updated to document IPv6 bits.
Stop treating IPv4 as an "unsigned int" and IPv6 as an array of
characters. Instead, always use the array of characters so we
can have one function fits all. This makes bitncmp(), addressOK(),
and several other functions "just work" on both address families.
add family() function which returns integer 4 or 6 for IPv4 or
IPv6. (See examples below) Note that to add this new function
you will need to dump/initdb/reload or find the correct magic
to add the function to the postgresql function catalogs.
IPv4 addresses always sort before IPv6.
On disk we use AF_INET for IPv4, and AF_INET+1 for IPv6 addresses.
This prevents the need for a dump and reload, but lets IPv6 parsing
work on machines without AF_INET6.
To select all IPv4 addresses from a table:
select * from foo where family(addr) = 4 ...
Order by and other bits should all work.
Michael Graff
specific hash functions used by hash indexes, rather than the old
not-datatype-aware ComputeHashFunc routine. This makes it safe to do
hash joining on several datatypes that previously couldn't use hashing.
The sets of datatypes that are hash indexable and hash joinable are now
exactly the same, whereas before each had some that weren't in the other.
out of mind, because it'd been commented out years ago). Try to bring the
remains up to a reasonable level of currency, and give it all approximately
the same high level of abstraction.
character in identifiers. The first change eliminates the current need
to put spaces around parameter references, as in "x<=$2". The second
change improves compatibility with Oracle and some other RDBMSes. This
was discussed and agreed to back in January, but did not get done.
not all SQL identifiers taken from command line arguments. We decided
years ago that that was a bad idea: identifiers taken from the command
line should be treated as literally correct. Remove the inconsistent
code that has crept in recently. Also fix pg_dump so that the combination
of --schema and --table does what you'd expect, namely dump exactly one
table from exactly one schema. Per gripe from Deepak Bhole of Red Hat.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
implementation limits, do not issue an ERROR; instead issue a NOTICE and use
the max supported value. Per pgsql-general discussion of 28-Apr, this is
needed to allow easy porting from pre-7.3 releases where the limits were
higher.
Unrelated change in same area: accept GLOBAL TEMP/TEMPORARY as a synonym
for TEMPORARY, as per pgsql-hackers discussion of 15-Apr. We previously
rejected it, but that was based on a misreading of the spec --- SQL92's
GLOBAL temp tables are really closer to what we have than their LOCAL ones.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.