Given a query such as
SELECT * FROM foo JOIN LATERAL (SELECT foo.var1) ss(x) ON ss.x = foo.var2
the existence of the join clause "ss.x = foo.var2" encourages indxpath.c to
build a parameterized path for foo using any index available for foo.var2.
This is completely useless activity, though, since foo has got to be on the
outside not the inside of any nestloop join with ss. It's reasonably
inexpensive to add tests that prevent creation of such paths, so let's do
that.
Every time the best-tuple-found-so-far changes, we need to reset all
the penalty values in which_grow[] to the penalties for the new best
tuple. The old code failed to do this, resulting in inferior index
quality.
The original patch from Alexander Korotkov was just two lines; I took
the liberty of fleshing that out by adding a bunch of comments that I
hope will make this logic easier for others to understand than it was
for me.
push_child_plan/pop_child_plan didn't bother to adjust the "ancestors"
list of parent plan nodes when descending to a child plan node. I think
this was okay when it was written, but it's not okay in the presence of
LATERAL references, since a subplan node could easily be returning a
LATERAL value back up to the same nestloop node that provides the value.
Per changed regression test results, the omission led to failure to
interpret Param nodes that have perfectly good interpretations.
In the initial cut at LATERAL, I kept the rule that cheapest_total_path
was always unparameterized, which meant it had to be NULL if the relation
has no unparameterized paths. It turns out to work much more nicely if
we always have *some* path nominated as cheapest-total for each relation.
In particular, let's still say it's the cheapest unparameterized path if
there is one; if not, take the cheapest-total-cost path among those of
the minimum available parameterization. (The first rule is actually
a special case of the second.)
This allows reversion of some temporary lobotomizations I'd put in place.
In particular, the planner can now consider hash and merge joins for
joins below a parameter-supplying nestloop, even if there aren't any
unparameterized paths available. This should bring planning of
LATERAL-containing queries to the same level as queries not using that
feature.
Along the way, simplify management of parameterized paths in add_path()
and friends. In the original coding for parameterized paths in 9.2,
I tried to minimize the logic changes in add_path(), so it just treated
parameterization as yet another dimension of comparison for paths.
We later made it ignore pathkeys (sort ordering) of parameterized paths,
on the grounds that ordering isn't a useful property for the path on the
inside of a nestloop, so we might as well get rid of useless parameterized
paths as quickly as possible. But we didn't take that reasoning as far as
we should have. Startup cost isn't a useful property inside a nestloop
either, so add_path() ought to discount startup cost of parameterized paths
as well. Having done that, the secondary sorting I'd implemented (in
add_parameterized_path) is no longer needed --- any parameterized path that
survives add_path() at all is worth considering at higher levels. So this
should be a bit faster as well as simpler.
This includes two micro-optimizations to the tight inner loop in descending
the SP-GiST tree: 1. avoid an extra function call to index_getprocinfo when
calling user-defined choose function, and 2. avoid a useless palloc+pfree
when node labels are not used.
The heapam XLog functions are used by other modules, not all of which
are interested in the rest of the heapam API. With this, we let them
get just the XLog stuff in which they are interested and not pollute
them with unrelated includes.
Also, since heapam.h no longer requires xlog.h, many files that do
include heapam.h no longer get xlog.h automatically, including a few
headers. This is useful because heapam.h is getting pulled in by
execnodes.h, which is in turn included by a lot of files.
This threw ERROR, not the expected NOTICE, if the index didn't exist.
The bug was actually visible in not-as-expected regression test output,
so somebody wasn't paying too close attention in commit
8cb53654db.
Per report from Brendan Byrd.
This enables selectivity estimation of the <<, >>, &<, &> and && operators,
as well as the normal inequality operators: <, <=, >=, >. "range @> element"
is also supported, but the range-variant @> and <@ operators are not,
because they cannot be sensibly estimated with lower and upper bound
histograms alone. We would need to make some assumption about the lengths of
the ranges for that. Alexander's patch included a separate histogram of
lengths for that, but I left that out of the patch for simplicity. Hopefully
that will be added as a followup patch.
The fraction of empty ranges is also calculated and used in estimation.
Alexander Korotkov, heavily modified by me.
This patch takes care of a number of problems having to do with failure
to choose valid join orders and incorrect handling of lateral references
pulled up from subqueries. Notable changes:
* Add a LateralJoinInfo data structure similar to SpecialJoinInfo, to
represent join ordering constraints created by lateral references.
(I first considered extending the SpecialJoinInfo structure, but the
semantics are different enough that a separate data structure seems
better.) Extend join_is_legal() and related functions to prevent trying
to form unworkable joins, and to ensure that we will consider joins that
satisfy lateral references even if the joins would be clauseless.
* Fill in the infrastructure needed for the last few types of relation scan
paths to support parameterization. We'd have wanted this eventually
anyway, but it is necessary now because a relation that gets pulled up out
of a UNION ALL subquery may acquire a reltargetlist containing lateral
references, meaning that its paths *have* to be parameterized whether or
not we have any code that can push join quals down into the scan.
* Compute data about lateral references early in query_planner(), and save
in RelOptInfo nodes, to avoid repetitive calculations later.
* Assorted corner-case bug fixes.
There's probably still some bugs left, but this is a lot closer to being
real than it was before.
The GUC check hooks for transaction_read_only and transaction_isolation
tried to check RecoveryInProgress(), so as to disallow setting read/write
mode or serializable isolation level (respectively) in hot standby
sessions. However, GUC check hooks can be called in many situations where
we're not connected to shared memory at all, resulting in a crash in
RecoveryInProgress(). Among other cases, this results in EXEC_BACKEND
builds crashing during child process start if default_transaction_isolation
is serializable, as reported by Heikki Linnakangas. Protect those calls
by silently allowing any setting when not inside a transaction; which is
okay anyway since these GUCs are always reset at start of transaction.
Also, add a check to GetSerializableTransactionSnapshot() to complain
if we are in hot standby. We need that check despite the one in
check_XactIsoLevel() because default_transaction_isolation could be
serializable. We don't want to complain any sooner than this in such
cases, since that would prevent running transactions at all in such a
state; but a transaction can be run, if SET TRANSACTION ISOLATION is done
before setting a snapshot. Per report some months ago from Robert Haas.
Back-patch to 9.1, since these problems were introduced by the SSI patch.
Kevin Grittner and Tom Lane, with ideas from Heikki Linnakangas
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
This improves on commit 51fed14d73 by
eliminating the assumption that we can form <some pointer value> +
<some offset> without overflow. The entire point of those tests is that
we don't trust the offset value, so coding them in a way that could wrap
around if the buffer happens to be near the top of memory doesn't seem
sound. Instead, track the remaining space as a size_t variable and
compare offsets against that.
Also, improve comment about why we need the extra early check on
xl_tot_len.
If a view has circular dependencies, pg_dump splits it into a CREATE TABLE
and a CREATE RULE command to break the dependency loop. However, if the
view has reloptions, those options cannot be applied in the CREATE TABLE
command, because views and tables have different allowed reloptions so
CREATE TABLE would reject them. Instead apply the reloptions after the
CREATE RULE, using ALTER VIEW SET.
Move discussion of why our algorithm for taking snapshots in recovery
to a more appropriate location in the function, and delete incorrect
mention of taking a lock.
When elevel >= ERROR, we add an abort() call to the ereport() macro to
give the compiler a hint that the ereport() expansion will not return,
but the abort() isn't actually reached because the longjmp happens in
errfinish().
Because the effect of ereport() varies with the elevel, we cannot use
standard compiler attributes such as noreturn for this.
If a WAL record header was split across pages, but xl_tot_len was 0, we
would get confused and conclude that we had already read the whole record,
and proceed to CRC check it. That can lead to a crash in RecordIsValid(),
which isn't careful to not read beyond end-of-record, as defined by
xl_tot_len.
Add an explicit sanity check for xl_tot_len <= SizeOfXlogRecord. Also,
make RecordIsValid() more robust by checking in each step that it doesn't
try to access memory beyond end of record, even if a length field in the
record's or a backup block's header is bogus.
Per report and analysis by Tom Lane.
Formerly, subquery pullup had no need to examine other entries in the range
table, since they could not contain any references to the subquery being
pulled up. That's no longer true with LATERAL, so now we need to be able
to visit rangetable subexpressions to replace Vars referencing the
pulled-up subquery. Also, this means that extract_lateral_references must
be unsurprised at encountering lateral PlaceHolderVars, since such might be
created when pulling up a subquery that's underneath an outer join with
respect to the lateral reference.
We had put a test for libxml2's xmlStructuredErrorContext variable in
configure, but of course that doesn't work on Windows builds. The next
best alternative seems to be to test the LIBXML_VERSION symbol provided
by xmlversion.h.
Per report from Talha Bin Rizwan, though this fixes it in a different way
than his proposed patch.
In the initial cut at the "parameterized paths" feature, I'd simplified
create_index_paths() to the point where it would only generate a single
parameterized bitmap path per relation. Experimentation with an example
supplied by Josh Berkus convinces me that that's not good enough: we really
need to consider a bitmap path for each possible outer relation. Otherwise
we have regressions relative to pre-9.2 versions, in which the planner
picks a plain indexscan where it should have used a bitmap scan in queries
involving three or more tables. Indeed, after fixing this, several queries
in the regression tests show improved plans as a result of using bitmap not
plain indexscans.
The implementation is a quad-tree, largely copied from the quad-tree
implementation for points. The lower and upper bound of ranges are the 2d
coordinates, with some extra code to handle empty ranges.
I left out the support for adjacent operator, -|-, from the original patch.
Not because there was necessarily anything wrong with it, but it was more
complicated than the other operators, and I only have limited time for
reviewing. That will follow as a separate patch.
Alexander Korotkov, reviewed by Jeff Davis and me.
Bruce Momjian
Tom Lane
Heikki Linnakangas
Robert Haas
Peter Eisentraut
Alvaro Herrera