had stopped working for tables buried inside views or sub-selects. This is
because I had gotten rid of the simplify_jointree() preprocessing step, and
optimize_minmax_aggregates() wasn't smart enough to deal with a non-canonical
FromExpr. Per gripe from Bill Howe.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
describe the maximum size of index tuples (which is typically AM-dependent
anyway); and consequently remove the bogus deduction for "special space"
that was built into it.
Adjust TOAST_TUPLE_THRESHOLD and TOAST_MAX_CHUNK_SIZE to avoid wasting two
bytes per toast chunk, and to ensure that the calculation correctly tracks any
future changes in page header size. The computation had been inaccurate in a
way that didn't cause any harm except space wastage, but future changes could
have broken it more drastically.
Fix the calculation of BTMaxItemSize, which was formerly computed as 1 byte
more than it could safely be. This didn't cause any harm in practice because
it's only compared against maxalign'd lengths, but future changes in the size
of page headers or btree special space could have exposed the problem.
initdb forced because of change in TOAST_MAX_CHUNK_SIZE, which alters the
storage of toast tables.
threshold for tuple length. On 4-byte-MAXALIGN machines, the toast code
creates tuples that have t_len exactly TOAST_TUPLE_THRESHOLD ... but this
number is not itself maxaligned, so if heap_insert maxaligns t_len before
comparing to TOAST_TUPLE_THRESHOLD, it'll uselessly recurse back to
tuptoaster.c, wasting cycles. (It turns out that this does not happen on
8-byte-MAXALIGN machines, because for them the outer MAXALIGN in the
TOAST_MAX_CHUNK_SIZE macro reduces TOAST_MAX_CHUNK_SIZE so that toast tuples
will be less than TOAST_TUPLE_THRESHOLD in size. That MAXALIGN is really
incorrect, but we can't remove it now, see below.) There isn't any particular
value in maxaligning before comparing to the thresholds, so just don't do
that, which saves a small number of cycles in itself.
These numbers should be rejiggered to minimize wasted space on toast-relation
pages, but we can't do that in the back branches because changing
TOAST_MAX_CHUNK_SIZE would force an initdb (by changing the contents of toast
tables). We can move the toast decision thresholds a bit, though, which is
what this patch effectively does.
Thanks to Pavan Deolasee for discovering the unintended recursion.
Back-patch into 8.2, but not further, pending more testing. (HEAD is about
to get a further patch modifying the thresholds, so it won't help much
for testing this form of the patch.)
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
generated solution files for what to install, instead of blindly copying
everything as it previously did. With the previous quick-n-dirty
version, it would copy old DLLs if you reconfigured in a way that didn't
include subprojects like a PL for example.
Magnus Hagander.
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Also update two error messages mentioned in the documenation to match.
nonportable "hh" sprintf(3) length modifier. Instead, do the parsing
and output by hand. The code to do this isn't ideal, but this is
an interim measure anyway: the uuid type should probably use the
in-memory struct layout specified by RFC 4122. For now, this patch
should hopefully rectify the buildfarm failures for the uuid test.
Along the way, re-add pg_cast entries for uuid <-> varchar, which
I mistakenly removed earlier, and bump the catversion.
In this case extractQuery should returns -1 as nentries. This changes
prototype of extractQuery method to use int32* instead of uint32* for
nentries argument.
Based on that gincostestimate may see two corner cases: nothing will be found
or seqscan should be used.
Per proposal at http://archives.postgresql.org/pgsql-hackers/2007-01/msg01581.php
PS tsearch_core patch should be sightly modified to support changes, but I'm
waiting a verdict about reviewing of tsearch_core patch.
The original coding failed (tried to access deallocated memory) if there were
two active call sites (fn_extra pointers) for the same function and the
function definition was updated. Also, if an update of a recursive function
was detected upon nested entry to the function, the existing compiled version
was summarily deallocated, resulting in crash upon return to the outer
instance. Problem observed while studying a bug report from Sergiy
Vyshnevetskiy.
Bug does not exist before 8.1 since older versions just leaked the memory of
obsoleted compiled functions, rather than trying to reclaim it.
by plpgsql can themselves use SPI --- possibly indirectly, as in the case
of domain_in() invoking plpgsql functions in a domain check constraint.
Per bug #2945 from Sergiy Vyshnevetskiy.
Somewhat arbitrarily, I've chosen to back-patch this as far as 8.0. Given
the lack of prior complaints, it doesn't seem critical for 7.x.
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
match because they contain a null join key (and the join operator is
known strict). Improves performance significantly when the inner
relation contains a lot of nulls, as per bug #2930.
handy to prevent core dump files from disappearing, but it's useless now
because (a) we don't drop core in individual DB subdirectories anymore,
and (b) CREATE DATABASE forces an internal checkpoint anyway.
reports; inspired by the misleading CONTEXT lines shown in recent bug report
from Stefan Kaltenbrunner. Also, allow statement-type names shown in these
messages to be translated.
that defined in RFC 4122. This patch includes the basic implementation,
plus regression tests. Documentation and perhaps some additional
functionality will come later. Catversion bumped.
Patch from Gevik Babakhani; review from Peter, Tom, and myself.
safely in the presence of subtransactions. To ensure that any ExprContext
shutdown callbacks are called at the right times, we have to have a separate
EState for each level of subtransaction. Per "TupleDesc reference leak" bug
report from Stefan Kaltenbrunner.
Although I'm convinced the code is wrong as far back as 8.0, it doesn't seem
that there are any ways for the problem to really manifest before 8.2: AFAICS,
8.0 and 8.1 only use the ExprContextCallback mechanism to handle set-returning
functions, which cannot usefully be executed in a "simple expression" anyway.
Hence, no backpatch before 8.2 --- the risk of unforeseen breakage seems
to outweigh the chance of fixing something.
activity quiesce. Possibly this will fix the large increase in
non-reproducible stats test failures we've noted since turning on
stats_row_level by default.
versus varchar[]. This oversight probably explains Ryan Holmes' recent
complaint --- he was getting a generic selectivity estimate instead of
anything intelligent.
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
input in the stats collector. Our select() emulation is apparently buggy
for UDP sockets :-(. This should resolve problems with stats collection
(and hence autovacuum) failing under more than minimal load. Diagnosis
and patch by Magnus Hagander.
Patch probably needs to be back-ported to 8.1 and 8.0, but first let's
see if it makes the buildfarm happy...
suffix, to distinguish them from doubles. Make some function declarations
and definitions use the "const" qualifier for arguments consistently.
Ignore warning 4102 ("unreferenced label"), because such warnings
are always emitted by bison-generated code. Patch from Magnus Hagander.
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
page about the maximum UTF8 sequence length we support (4 bytes since 8.1,
3 before that). pg_utf2wchar_with_len never got updated to support 4-byte
characters at all, and in any case had a buffer-overrun risk in that it
could produce multiple pg_wchars from what mblen claims to be just one UTF8
character. The only reason we don't have a major security hole is that most
callers allocate worst-case output buffers; the sole exception in released
versions appears to be pre-8.2 iwchareq() (ie, ILIKE), which can be crashed
due to zeroing out its return address --- but AFAICS that can't be exploited
for anything more than a crash, due to inability to control what gets written
there. Per report from James Russell and Michael Fuhr.
Pre-8.1 the risk is much less, but I still think pg_utf2wchar_with_len's
behavior given an incomplete final character risks buffer overrun, so
back-patch that logic change anyway.
This patch also makes sure that UTF8 sequences exceeding the supported
length (whichever it is) are consistently treated as error cases, rather
than being treated like a valid shorter sequence in some places.
involving unions of types having typmods. Variants of the failure are known
to occur in 8.1 and up; not sure if it's possible in 8.0 and 7.4, but since
the code exists that far back, I'll just patch 'em all. Per report from
Brian Hurt.
FAMILY; and add FAMILY option to CREATE OPERATOR CLASS to allow adding a
class to a pre-existing family. Per previous discussion. Man, what a
tedious lot of cutting and pasting ...
which I had removed in the first cut of the EquivalenceClass rewrite to
simplify that patch a little. But it's still important --- in a four-way
join problem mergejoinscansel() was eating about 40% of the planning time
according to gprof. Also, improve the EquivalenceClass code to re-use
join RestrictInfos rather than generating fresh ones for each join
considered. This saves some memory space but more importantly improves
the effectiveness of caching planning info in RestrictInfos.
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
provide just a boolean 'amcanorder', instead of fields that specify the
sort operator strategy numbers. We have decided to require ordering-capable
AMs to use btree-compatible strategy numbers, so the old fields are
overkill (and indeed misleading about what's allowed).
representation of equivalence classes of variables. This is an extensive
rewrite, but it brings a number of benefits:
* planner no longer fails in the presence of "incomplete" operator families
that don't offer operators for every possible combination of datatypes.
* avoid generating and then discarding redundant equality clauses.
* remove bogus assumption that derived equalities always use operators
named "=".
* mergejoins can work with a variety of sort orders (e.g., descending) now,
instead of tying each mergejoinable operator to exactly one sort order.
* better recognition of redundant sort columns.
* can make use of equalities appearing underneath an outer join.
currentMarkData from IndexScanDesc to the opaque structs for the
AMs that need this information (currently gist and hash).
Patch from Heikki Linnakangas, fixes by Neil Conway.
the generated files, to help Visual C++ to run these tests. The tests still
pass in VPATH and normal builds.
Patch from Magnus Hagander, editorialized by me.
is deleted. A backend about to unlink a file now sends a "revoke fsync"
request to the bgwriter to make it clean out pending fsync requests. There
is still a race condition where the bgwriter may try to fsync after the unlink
has happened, but we can resolve that by rechecking the fsync request queue
to see if a revoke request arrived meanwhile. This eliminates the former
kluge of "just assuming" that an ENOENT failure is okay, and lets us handle
the fact that on Windows it might be EACCES too without introducing any
questionable assumptions. After an idea of mine improved by Magnus.
The HEAD patch doesn't apply cleanly to 8.2, but I'll see about a back-port
later. In the meantime this could do with some testing on Windows; I've been
able to force it through the code path via ENOENT, but that doesn't prove that
it actually fixes the Windows problem ...
* After Markos patch, now builds pgcrypto without zlib again
* Updates README with xml info
* xml requires xslt and iconv
* disable unnecessary warning about __cdecl()
* Add a buildenv.bat called from all other bat files to set up things
like PATH for flex/bison. (Can't just set it before calling, doesn't
always work when building from the GUI)
The implementation is somewhat ugly logic-wise, but I don't see an
easy way to make it more concise.
When writing this, I noticed that my previous implementation of
width_bucket() doesn't handle NaN correctly:
postgres=# select width_bucket('NaN', 1, 5, 5);
width_bucket
--------------
6
(1 row)
AFAICS SQL:2003 does not define a NaN value, so it doesn't address how
width_bucket() should behave here. The patch changes width_bucket() so
that ereport(ERROR) is raised if NaN is specified for the operand or the
lower or upper bounds to width_bucket(). For float8, NaN is disallowed
for any of the floating-point inputs, and +/- infinity is disallowed
for the histogram bounds (but allowed for the operand).
Update docs and regression tests, bump the catversion.
it was checking a pg_constraint OID instead of pg_class OID, resulting in
"relation with OID nnnnn does not exist" failures for anyone who wasn't
owner of the table being examined. Per bug #2848 from Laurence Rowe.
Note: for existing 8.2 installations a simple version update won't fix this;
the easiest fix is to CREATE OR REPLACE this view with the corrected
definition.
accessing it, like DROP DATABASE. This allows the regression tests to pass
with autovacuum enabled, which open the gates for finally enabling autovacuum
by default.
standard convention the 21st century runs from 2001-2100, not 2000-2099,
so make it work like that. Per bug #2885 from Akio Iwaasa.
Backpatch to 8.2, but no further, since this is really a definitional
change; users of older branches are probably more interested in stability.
hold true for operators in a btree operator family. This is mostly to
clarify my own thinking about what the planner can assume for optimization
purposes. (blowing dust off an old abstract-algebra textbook...)
(or other types of pg_class entry): the function pgstat_vacuum_tabstat,
invoked during VACUUM startup, had runtime proportional to the number of
stats table entries times the number of pg_class rows; in other words
O(N^2) if the stats collector's information is reasonably complete.
Replace list searching with a hash table to bring it back to O(N)
behavior. Per report from kim at myemma.com.
Back-patch as far as 8.1; 8.0 and before use different coding here.
Made this option mark the .c files, so the environment variable is no longer needed.
Created a special MinGW file with the special error message.
Do not print port into log file when running regression tests.
which comparison operators to use for plan nodes involving tuple comparison
(Agg, Group, Unique, SetOp). Formerly the executor looked up the default
equality operator for the datatype, which was really pretty shaky, since it's
possible that the data being fed to the node is sorted according to some
nondefault operator class that could have an incompatible idea of equality.
The planner knows what it has sorted by and therefore can provide the right
equality operator to use. Also, this change moves a couple of catalog lookups
out of the executor and into the planner, which should help startup time for
pre-planned queries by some small amount. Modify the planner to remove some
other cavalier assumptions about always being able to use the default
operators. Also add "nulls first/last" info to the Plan node for a mergejoin
--- neither the executor nor the planner can cope yet, but at least the API is
in place.
1) gendef works from inside visual studio - use a tempfile instead of
redirection, because for some reason you can't redirect dumpbin from
inside (patch from Joachim Wieland)
2) gendef must process only *.obj, or you get weird errors in some build
scenarios when it tries to process a logfile
Magnus Hagander
the same output level that was used when building a single project
before, and really needed to get reasonable information about what
happens (non-verbose just says "starting build of foo" and "done
building foo", more or less).
Magnus Hagander
management. The paper clearly describes many of the ideas embodied in
our current hashing code, but as far as I could find out there is not
a direct code heritage. (Mike Olsen recalls discussion of this paper
at Postgres meetings but believes it "informed the Postgres implementation
probably just at the design level". Margo herself says she wasn't
involved with Postgres' hash code.) Credit where credit is due 'n all
that, even if fifteen years after the fact.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
when collapsing of JOIN trees is stopped by join_collapse_limit. For instance
a list of 11 LEFT JOINs with limit 8 now produces something like
((1 2 3 4 5 6 7 8) 9 10 11 12)
instead of
(((1 2 3 4 5 6 7 8) (9)) 10 11 12)
The latter structure is really only required for a FULL JOIN.
Noted while studying an example from Shane Ambler.
hash joins with the estimated-larger relation on the inside. There are
several cases where doing that makes perfect sense, and in cases where it
doesn't, the regular cost computation really ought to be able to figure that
out. Make some marginal tweaks in said computation to try to get results
approximating reality a bit better. Per an example from Shane Ambler.
Also, fix an oversight in the original patch to add seq_page_cost: the costs
of spilling a hash join to disk should be scaled by seq_page_cost.
sets the items, and serializes the value back (rather than adding an
arbitrary number of XML preambles as before).
The libxml memory management via palloc had to be disabled because it
crashes when libxml tries to access memory that was helpfully freed
earlier by PostgreSQL. This needs further thought.
database privileges from a pre-8.2 server. This ensures that the reloaded
database will maintain the same behavior it had in the previous installation,
ie, everybody has connect privilege. Per gripe from L Bayuk.
an optarg). Add some comments noting that code in three different files has
to be kept in sync. Fix erroneous description of -S switch (it sets work_mem
not silent_mode), and do some light copy-editing elsewhere in postgres-ref.
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
having md.c return a success/failure boolean to smgr.c, which was just going
to elog anyway, let md.c issue the elog messages itself. This allows better
error reporting, particularly in cases such as "short read" or "short write"
which Peter was complaining of. Also, remove the kluge of allowing mdread()
to return zeroes from a read-beyond-EOF: this is now an error condition
except when InRecovery or zero_damaged_pages = true. (Hash indexes used to
require that behavior, but no more.) Also, enforce that mdwrite() is to be
used for rewriting existing blocks while mdextend() is to be used for
extending the relation EOF. This restriction lets us get rid of the old
ad-hoc defense against creating huge files by an accidental reference to
a bogus block number: we'll only create new segments in mdextend() not
mdwrite() or mdread(). (Again, when InRecovery we allow it anyway, since
we need to allow updates of blocks that were later truncated away.)
Also, clean up the original makeshift patch for bug #2737: move the
responsibility for padding relation segments to full length into md.c.
The purpose is to allow autovacuum-esq conditional vacuuming and
clustering using SQL to discover the required stats.
No documentation updates required. Catalog version updated.
Glen Parker
valid result from a computation if one of the input values was infinity.
The previous code assumed an operation that returned infinity was an
overflow.
Handle underflow/overflow consistently, and add checks for aggregate
overflow.
Consistently prevent Inf/Nan from being cast to integer data types.
Fix INT_MIN % -1 to prevent overflow.
Update regression results for new error text.
Per report from Roman Kononov.
pg_opclass during LookupOpclassInfo(), I'd turned pg_opclass_oid_index
into a critical system index. However the problem could only manifest
during a backend's first attempt to load opclass data, and then only
if it had successfully loaded pg_internal.init and subsequently received
a relcache flush; which made it impossible to reproduce in sequential
tests and darn hard even in parallel tests. Memo to self: when
exercising cache flush scenarios, must disable LookupOpclassInfo's
internal cache too.
or contradictory keys even in cross-data-type scenarios. This is another
benefit of the opfamily rewrite: we can find the needed comparison
operators now.
the 8.1 SQL function definition for it. Per report from Rajesh Kumar Mallah,
such a DBA error doesn't seem at all improbable, and the cost of checking for
it is not very high compared to the cost of running this function. (It would
have been better to change the C name of the function so it wouldn't be called
by the old SQL definition, but it's too late for that now in the 8.2 branch.)
of increasing size, instead of one at a time. This reduces the memory
management overhead when num_temp_buffers is large: in the previous coding
we would actually waste 50% of the space used for temp buffers, because aset.c
would round the individual requests up to 16K. Problem noted while studying
a performance issue reported by Steven Flatt.
Back-patch as far as 8.1 --- older versions used few enough local buffers
that the issue isn't significant for them.
has a small maxBlockSize: the maximum request size that we will treat as a
"chunk" needs to be limited to fit in maxBlockSize. Otherwise we will round
up the request size to the next power of 2, wasting space, which is a bit
pointless if we aren't going to make the blocks big enough to fit additional
stuff in them. The example motivating this is local buffer management, which
makes repeated allocations of 8K (one BLCKSZ buffer) in TopMemoryContext,
which has maxBlockSize = 8K because for the most part allocations there are
small. This leads to each local buffer actually eating 16K of space, which
adds up when there are thousands of them. I intend to change localbuf.c to
aggregate its requests, which will prevent this particular misbehavior, but
it seems likely that similar scenarios could arise elsewhere, so fixing the
core problem seems wise as well.
PQdsplen()) normally, instead of replacing them by \uXXXX sequences.
Assume that they in fact occupy zero screen space for formatting purposes.
Per gripe from Michael Fuhr and ensuing discussion.
involving HashAggregate over SubqueryScan (this is the known case, there
may well be more). The bug is only latent in releases before 8.2 since they
didn't try to access tupletable slots' descriptors during ExecDropTupleTable.
The least bogus fix seems to be to make subqueries share the parent query's
memory context, so that tupdescs they create will have the same lifespan as
those of the parent query. There are comments in the code envisioning going
even further by not having a separate child EState at all, but that will
require rethinking executor access to range tables, which I don't want to
tackle right now. Per bug report from Jean-Pierre Pelletier.
ps_TupFromTlist in plan nodes that make use of it. This was being done
correctly in join nodes and Result nodes but not in any relation-scan nodes.
Bug would lead to bogus results if a set-returning function appeared in the
targetlist of a subquery that could be rescanned after partial execution,
for example a subquery within EXISTS(). Bug has been around forever :-(
... surprising it wasn't reported before.
were marked canSetTag. While it's certainly correct to return the result
of the last one that is marked canSetTag, it's less clear what to do when
none of them are. Since plpgsql will complain if zero is returned, the
8.2.0 behavior isn't good. I've fixed it to restore the prior behavior of
returning the physically last query's result code when there are no
canSetTag queries.
Use a TRY block instead of (inadequate) ad-hoc coding to ensure that
libxml is cleaned up after a failure. Report the intended SQLCODE
instead of defaulting to XX000. Avoid risking use of a dangling
pointer by keeping the persistent error buffer in TopMemoryContext.
Be less trusting that error messages don't contain %.
This patch doesn't do anything about changing the way the messages
are put together --- this is just about mechanism.
bletcherous and unsafe manipulation of global encoding setting.
Clean up libxml reporting mechanism a bit (it still looks like a
dangling-pointer crash waiting to happen, though, not to mention
being far less than sane from a localization standpoint).
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
operator strategy numbers, ie, GiST and GIN. This is almost cosmetic
enough to not need a catversion bump, but since the opr_sanity regression
test has to change in sync with the catalog entry, I figured I'd better
do one.
are all in new-in-8.2 logic associated with indexability of ScalarArrayOpExpr
(IN-clauses) or amortization of indexscan costs across repeated indexscans
on the inside of a nestloop. In particular:
Fix some logic errors in the estimation for multiple scans induced by a
ScalarArrayOpExpr indexqual.
Include a small cost component in bitmap index scans to reflect the costs of
manipulating the bitmap itself; this is mainly to prevent a bitmap scan from
appearing to have the same cost as a plain indexscan for fetching a single
tuple.
Also add a per-index-scan-startup CPU cost component; while prior releases
were clearly too pessimistic about the cost of repeated indexscans, the
original 8.2 coding allowed the cost of an indexscan to effectively go to zero
if repeated often enough, which is overly optimistic.
Pay some attention to index correlation when estimating costs for a nestloop
inner indexscan: this is significant when the plan fetches multiple heap
tuples per iteration, since high correlation means those tuples are probably
on the same or adjacent heap pages.
joinclause doesn't use any outer-side vars) requires a "bushy" plan to be
created. The normal heuristic to avoid joins with no joinclause has to be
overridden in that case. Problem is new in 8.2; before that we forced the
outer join order anyway. Per example from Teodor.
representing externally-supplied values, since the APIs that carry such
values only specify type not typmod. However, for PARAM_SUBLINK Params
it is handy to carry the typmod of the sublink's output column. This
is a much cleaner solution for the recently reported 'could not find
pathkey item to sort' and 'failed to find unique expression in subplan
tlist' bugs than my original 8.2-compatible patch. Besides, someday we
might want to support typmods for external parameters ...
in normal operation, and we can avoid rewriting pg_control at every log
segment switch if we don't insist that these values be valid. Reducing
the number of pg_control updates is a good idea for both performance and
reliability. It does make pg_resetxlog's life a bit harder, but that seems
a good tradeoff; and anyway the change to pg_resetxlog amounts to automating
something people formerly needed to do by hand, namely look at the existing
pg_xlog files to make sure the new WAL start point was past them.
In passing, change the wording of xlog.c's "database system was interrupted"
messages: describe the pg_control timestamp as "last known up at" rather than
implying it is the exact time of service interruption. With this change the
timestamp will generally be the time of the last checkpoint, which could be
many minutes before the failure; and we've already seen indications that
people tend to misinterpret the old wording.
initdb forced due to change in pg_control layout. Simon Riggs and Tom Lane
release it in a subtransaction abort, but this neglects possibility that
someone outside SPI already did. Fix is for spi.c to forget about a tuptable
as soon as it's handed it back to the caller.
Per bug #2817 from Michael Andreen.
rearrangeable outer joins and the WHERE clause is non-strict and mentions
only nullable-side relations. New bug in 8.2, caused by new logic to allow
rearranging outer joins. Per bug #2807 from Ross Cohen; thanks to Jeff
Davis for producing a usable test case.
a sublink's test expression have the correct vartypmod, rather than defaulting
to -1. There's at least one place where this is important because we're
expecting these Vars to be exactly equal() to those appearing in the subplan
itself. This is a pretty klugy solution --- it would likely be cleaner to
change Param nodes to include a typmod field --- but we can't do that in the
already-released 8.2 branch.
Per bug report from Hubert Fongarnand.
identify long-running transactions. Since we already need to record
the transaction-start time (e.g. for now()), we don't need any
additional system calls to report this information.
Catversion bumped, initdb required.
capitalize the strings like sentences. Remove unnecessarily
specific descriptions of the units used by GUC variables, since
we now allow any reasonable unit to be specified.
FormatMessage() (This should have been in 8.2.0, patched to 8.2.X and
HEAD):
I think this problem to be complex....
http://archives.postgresql.org/pgsql-hackers/2006-11/msg00042.php
FormatMessage of windows cannot consider the encoding of the database.
However, I should try the solution now. It is necessary to clear the
problem.
Multi character-code exists together in message and log. It doesn't
consider
the data base encoding that the user intended....
The user in multi-byte country can try this.
http://inet.winpg.jp/~saito/pg_bug/MessageCheck.c
That is, it is likely to become it in this manner.(Japanese)
http://inet.winpg.jp/~saito/pg_bug/FormatMessage998.png
Hiroshi Saito
by name on each and every row processed. Profiling suggests this may
buy a percent or two for simple UPDATE scenarios, which isn't huge,
but when it's so easy to get ...
by the change to make limit values int8 instead of int4. (Specifically, you
can do DatumGetInt32 safely on a null value, but not DatumGetInt64.) Per
bug #2803 from Greg Johnson.
should allow delete-pending files to actually go away, and thereby work
around the various complaints we've seen about 'permission denied'
errors in such cases. Should be reasonably harmless in any case...
StartupXLOG and ShutdownXLOG no longer need to be critical sections, because
in all contexts where they are invoked, elog(ERROR) would be translated to
elog(FATAL) anyway. (One change in bgwriter.c is needed to make this true:
set ExitOnAnyError before trying to exit. This is a good fix anyway since
the existing code would have gone into an infinite loop on elog(ERROR) during
shutdown.) That avoids a misleading report of PANIC during semi-orderly
failures. Modify the postmaster to include the startup process in the set of
processes that get SIGTERM when a fast shutdown is requested, and also fix it
to not try to restart the bgwriter if the bgwriter fails while trying to write
the shutdown checkpoint. Net result is that "pg_ctl stop -m fast" does
something reasonable for a system in warm standby mode, and so should Unix
system shutdown (ie, universal SIGTERM). Per gripe from Stephen Harris and
some corner-case testing of my own.
remove page on next level linked from next inner page, ginScanToDelete()
wrongly sets parent page. Bug reveals when many item pointers from index
was deleted ( several hundred thousands).
Bug is discovered by hubert depesz lubaczewski <depesz@gmail.com>
Suppose, we need rc2 before release...
result now depends on the lc_messages setting, as noted by Bruce.
Also, mark to_number() and the numeric-type variants of to_char() as stable,
because their results depend on lc_numeric; this is a longstanding oversight.
Also, mark to_date() and to_char(interval) as stable; although these appear
not to depend on any GUC variables as of CVS HEAD, that seems a property
unlikely to survive future improvements. It seems best to mark all the
formatting functions stable and be done with it.
catversion not bumped, because this does not seem critical enough to force
a post-RC1 initdb, and anyway we cannot do so in the back branches.
(in particular, causing the ReadyForQuery message to be eaten) before
returning from do_copy. The only known consequence of failing to do so is
that get_prompt might show a wrong result for the %x transaction status
escape, as reported by Bernd Helmle; but it's possible there are other issues.
Back-patch as far as 7.4, the oldest version supporting %x.
vacuum/analyze timestamp columns at the end, rather than at a random
spot in the middle as in the original patch. This was deemed more usable
as well as less likely to break existing application code. initdb forced
accordingly. In passing, remove former kluge for initializing
pg_stat_file()'s pg_proc entry --- bootstrap mode was fixed recently
so that this can be done without any hacks, but I overlooked this usage.
HeapTuple that is no longer allocated as a single palloc() block; if
used carelessly, this might result in a subsequent memory leak after
heap_freetuple().
AbortTransaction, which would lead to recursion and eventual PANIC exit
as illustrated in recent report from Jeff Davis. First, in xact.c create
a special dedicated memory context for AbortTransaction to run in. This
solves the problem as long as AbortTransaction doesn't need more than 32K
(or whatever other size we create the context with). But in corner cases
it might. Second, in trigger.c arrange to keep pending after-trigger event
records in separate contexts that can be freed near the beginning of
AbortTransaction, rather than having them persist until CleanupTransaction
as before. Third, in portalmem.c arrange to free executor state data
earlier as well. These two changes should result in backing off the
out-of-memory condition before AbortTransaction needs any significant
amount of memory, at least in typical cases such as memory overrun due
to too many trigger events or too big an executor hash table. And all
the same for subtransaction abort too, of course.
zic's Europe/London, rather than Europe/Dublin as before. This seems
a less surprising choice, particularly with respect to dates before
1948. Original suggestion was to translate to straight GMT, but this
seems wrong given that these zones *are* DST-aware. Per offlist
discussion with Magnus.
in the middle of executing a SPI query. This doesn't entirely fix the
problem of memory leakage in plpgsql exception handling, but it should
get rid of the lion's share of leakage.
because on that platform strftime produces localized zone names in varying
encodings. Even though it's only in a comment, this can cause encoding
errors when reloading the dump script. Per suggestion from Andreas
Seltenreich. Also, suppress %Z on Windows in the %s escape of
log_line_prefix ... not sure why this one is different from the other two,
but it shouldn't be.
python 2.5. This involves fixing several violations of the published
spec for creating PyTypeObjects, and adding another regression test
expected output for yet another variation of error message spelling.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
Typo in the changes to plperl - uses wrong dir, and had a missing slash.
Also fixes error checking for xsubpp - it was broken in a way that hid
the problem above when run more than once (which is the normal case when
developing).
Negotiation failure is only likely to happen if one side or the other is
misconfigured, eg. bad client certificate. I'm not 100% convinced that
a retry is really the best thing, hence not back-patching this fix for now.
Per gripe from Sergio Cinos.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
* New versions of OpenSSL come with proper debug versions, and use
suffixed names on the LIBs for that. Adapts library handling to deal
with that.
* Fixes error where it incorrectly enabled Kerberos based on NLS
configuration instead of Kerberos configuration
* Specifies path of perl in config, instead of using current one.
Required when using a 64-bit perl normally, but want to build pl/perl
against 32-bit one (required)
* Fix so pgevent generates win32ver.rc automatically
Magnus Hagander
any no-longer-needed segments; just truncate them to zero bytes and leave
the files in place for possible future re-use. This avoids problems when
the segments are re-used due to relation growth shortly after truncation.
Before, the bgwriter, and possibly other backends, could still be holding
open file references to the old segment files, and would write dirty blocks
into those files where they'd disappear from the view of other processes.
Back-patch as far as 8.0. I believe the 7.x branches are not vulnerable,
because they had no bgwriter, and "blind" writes by other backends would
always be done via freshly-opened file references.
preference for filling pages out-of-order tends to confuse the sanity checks
in md.c, as per report from Balazs Nagy in bug #2737. The fix is to ensure
that the smgr-level code always has the same idea of the logical EOF as the
hash index code does, by using ReadBuffer(P_NEW) where we are adding a single
page to the end of the index, and using smgrextend() to reserve a large batch
of pages when creating a new splitpoint. The patch is a bit ugly because it
avoids making any changes in md.c, which seems the most prudent approach for a
backpatchable beta-period fix. After 8.3 development opens, I'll take a look
at a cleaner but more invasive patch, in particular getting rid of the now
unnecessary hack to allow reading beyond EOF in mdread().
Backpatch as far as 7.4. The bug likely exists in 7.3 as well, but because
of the magnitude of the 7.3-to-7.4 changes in hash, the later-version patch
doesn't even begin to apply. Given the other known bugs in the 7.3-era hash
code, it does not seem worth trying to develop a separate patch for 7.3.
cases where we already hold the desired lock "indirectly", either via
membership in a MultiXact or because the lock was originally taken by a
different subtransaction of the current transaction. These cases must be
accounted for to avoid needless deadlocks and/or inappropriate replacement of
an exclusive lock with a shared lock. Per report from Clarence Gardner and
subsequent investigation.
of an index on a serial column, rather than the name of the associated
sequence. Fallout from recent changes in dependency setup for serials.
Per bug #2732 from Basil Evseenko.
added to information_schema (per a SQL2003 addition). The original coding
failed if a referenced column participated in more than one pg_constraint
entry. Also, it did not work if an FK relied directly on a unique index
without any constraint syntactic sugar --- this case is outside the SQL spec,
but PG has always supported it, so it's reasonable for our information_schema
to handle it too. Per bug#2750 from Stephen Haberman.
Although this patch changes the initial catalog contents, I didn't force
initdb. Any beta3 testers who need the fix can install it via CREATE OR
REPLACE VIEW, so forcing them to initdb seems an unnecessary imposition.
accurately: we have to distinguish the effects of the join's own ON
clauses from the effects of pushed-down clauses. Failing to do so
was a quick hack long ago, but it's time to be smarter. Per example
from Thomas H.
30 seconds instead of retrying forever. Also modify xlog.c so that if
it fails to rename an old xlog segment up to a future slot, it will
unlink the segment instead. Per discussion of bug #2712, in which it
became apparent that Windows can handle unlinking a file that's being
held open, but not renaming it.
The former coding relied on the actual allocated size of the last block,
which made it behave strangely if the first allocation in a context was
larger than ALLOC_CHUNK_LIMIT: subsequent allocations would be referenced
to that and not to the intended series of block sizes. Noted while
studying a memory wastage gripe from Tatsuo.
more space is needed, instead of incrementing by a fixed amount; the old
method wastes lots of space and time when the ultimate size is large.
Per gripe from Tatsuo.
text_to_array(): they all had O(N^2) behavior on long input strings in
multibyte encodings, because of repeated rescanning of the input text to
identify substrings whose positions/lengths were computed in characters
instead of bytes. Fix by tracking the current source position as a char
pointer as well as a character-count. Also avoid some unnecessary palloc
operations. text_to_array() also leaked memory intracall due to failure
to pfree temporary strings. Per gripe from Tatsuo Ishii.
sub-arrays. Per discussion, if all inputs are empty arrays then result
must be an empty array too, whereas a mix of empty and nonempty arrays
should (and already did) draw an error. In the back branches, the
construct was strict: any NULL input immediately yielded a NULL output;
so I left that behavior alone. HEAD was simply ignoring NULL sub-arrays,
which doesn't seem very sensible. For lack of a better idea it now
treats NULL sub-arrays the same as empty ones.
include it if it links properly. It seems too risky to assume that
standard functions like pow() are not special-cased by the compiler.
Per report from Andreas Lange that build fails on Solaris cc compiler
with -fast. Even though we don't consider that a supported option,
I'm worried that similar issues will arise with other compilers.
manually release the LDAP handle via ldap_unbind(). This isn't a
significant problem in practice because an error eventually results
in exiting the process, but we can cleanup correctly without too
much pain.
In passing, fix an error in snprintf() usage: the "size" parameter
to snprintf() is the size of the destination buffer, including space
for the NUL terminator. Also, depending on the value of NAMEDATALEN,
the old coding could have allowed for a buffer overflow.
stale relcache init files (pg_internal.init), and there is no mechanism for
updating them during WAL replay. Easiest solution is just to delete the init
files at conclusion of startup, and let the first backend started in each
database take care of rebuilding the init file. Simon Riggs and Tom Lane.
Back-patched to 8.1. Arguably this should be fixed in 8.0 too, but it would
require significantly more code since 8.0 has no handy startup-time scan of
pg_database to piggyback on. Manual solution of the problem is possible
in 8.0 (just delete the pg_internal.init files before starting WAL replay),
so that may be a sufficient answer.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
deletion code to avoid the case where an upper-level btree page remains "half
dead" for a significant period of time, and to block insertions into a key
range that is in process of being re-assigned to the right sibling of the
deleted page's parent. This prevents the scenario reported by Ed L. wherein
index keys could become out-of-order in the grandparent index level.
Since this is a moderately invasive fix, I'm applying it only to HEAD.
The bug exists back to 7.4, but the back branches will get a different patch.
(blobs) with comments, per bug #2727 from Konstantin Pelepelin.
Mea culpa for not having tested this case.
Back-patch to 8.1; prior branches don't dump blob comments at all.
node of a SubLink or SubPlan testexpr field. Bug resulted from replacing
the old lefthand/exprs list fields with a simple expression field, and not
remembering that expression_tree_walker is coded to save a few cycles by
recursing directly to self on list fields (on the assumption the walker
isn't interested in List nodes per se). On non-list fields it must of
course call the walker. Possibly that hack isn't worth the risk of more
such bugs, but I'll leave it be for now. Per bug report from James Robinson.
outer joins. Originally it was only looking for overlap of the righthand
side of a left join, but we have to do it on the lefthand side too.
Per example from Jean-Pierre Pelletier.
if available (which it usually should be), during processing of Bind
and Execute protocol messages. This improves usefulness of
log_min_error_statement logging for extended query protocol.
sin_port in the returned IP address struct when servname is NULL. This has
been observed to cause failure to bind the stats collection socket, and
could perhaps cause other issues too. Per reports from Brad Nicholson
and Chris Browne.
that conflict with the OID that we want to use for the new database.
This avoids the risk of trying to remove files that maybe we shouldn't
remove. Per gripe from Jon Lapham and subsequent discussion of 27-Sep.
timezone actually has a daylight-savings rule. This avoids breaking
cases that used to work because they went through the DecodePosixTimezone
code path. Per contrib regression failures (mea culpa for not running
those yesterday...). Also document the already-applied change to allow
GMT offsets up to 14 hours.
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
example SET TIME ZONE 'america/new_york' works now. This seems a good
idea on general user-friendliness grounds, and is part of the solution
to the timestamp-input parsing problems I noted recently.
modules; the first try was not usable in EXEC_BACKEND builds (e.g.,
Windows). Instead, just provide some entry points to increase the
allocation requests during postmaster start, and provide a dedicated
LWLock that can be used to synchronize allocation operations performed
by backends. Per discussion with Marc Munro.
one of the program's core data structures, make use of the existing
ability to selectively exclude TOC items by ID. Slightly more code but
much less likely to create future maintenance problems.
1) pgwin32_waitforsinglesocket(): WaitForMultipleObjectsEx now called with
finite timeout (100ms) in case of FP_WRITE and UDP socket. If timeout occurs
then pgwin32_waitforsinglesocket() tries to write empty packet goes to
WaitForMultipleObjectsEx again.
2) pgwin32_send(): add loop around WSASend and pgwin32_waitforsinglesocket().
The reason is: for overlapped socket, 'ok' result from
pgwin32_waitforsinglesocket() isn't guarantee that socket is still free,
it can become busy again and following WSASend call will fail with
WSAEWOULDBLOCK error.
See http://archives.postgresql.org/pgsql-hackers/2006-10/msg00561.php
rows --- if the surrounding query queued any trigger events between the rows,
the events would be fired at the wrong time, leading to bizarre behavior.
Per report from Merlin Moncure.
This is a simple patch that should solve the problem fully in the back
branches, but in HEAD we also need to consider the possibility of queries
with RETURNING clauses. Will look into a fix for that separately.
I introduced in 7.4.1 :-(. It's correct to allow unknown to be coerced to
ANY or ANYELEMENT, since it's a real-enough data type, but it most certainly
isn't an array datatype. This can cause a backend crash but AFAICT is not
exploitable as a security hole. Per report from Michael Fuhr.
Note: as fixed in HEAD, this changes a constant in the pg_stats view,
resulting in a change in the expected regression outputs. The back-branch
patches have been hacked to avoid that, so that pre-existing installations
won't start failing their regression tests.
to process all inclusion switches then all exclusion switches, so that the
behavior is independent of switch ordering.
Use of -T does not cause non-table objects to be suppressed. And
the patterns are now interpreted the same way psql's \d commands do it,
rather than as pure regex commands; this allows for example -t schema.tab
to do what it should have been doing all along. Re-enable the --blobs
switch to do something useful, ie, add back blobs into a dump they were
otherwise suppressed from.
pg_dump as well as psql. Since psql already uses dumputils.c, while there's
not any code sharing in the other direction, this seems the easiest way.
Also, fix misinterpretation of patterns using regex | by adding parentheses
(same bug found previously in similar_escape()). This should be backpatched.
quote chars inside quote marks, should emit one quote *and stay in inquotes
mode*. No doubt the lack of reports of this have something to do with the
poor documentation of the feature ...
portable long options. But we have had portable long options for a long
time now, so this is obsolete. Now people have added options which *only*
work with -X but not as regular long option, so I'm putting a stop to this:
-X is deprecated; it still works, but it has been removed from the
documentation, and please don't add more of them.
max_stack_depth is not set to an unsafe value.
This commit also provides configure-time checking for <sys/resource.h>,
and cleans up some perhaps-unportable code associated with use of that
include file and getrlimit().
platform limit, rather than just blindly raising max_stack_depth.
Also, tweak the code to work properly if someone sets max_stack_depth
to more than 2Gb, which guc.c will allow on a 64-bit machine.
overlapping possible matches for the separator string, such as
string_to_array('123xx456xxx789', 'xx').
Also, revise the logic of replace(), split_part(), and string_to_array()
to avoid O(N^2) work from redundant searches and conversions to pg_wchar
format when there are N matches to the separator string.
Backpatched the full patch as far as 8.0. 7.4 also has the bug, but the
code has diverged a lot, so I just went for a quick-and-dirty fix of the
bug itself in that branch.
been initialized yet. This can happen because there are code paths that call
SysCacheGetAttr() on a tuple originally fetched from a different syscache
(hopefully on the same catalog) than the one specified in the call. It
doesn't seem useful or robust to try to prevent that from happening, so just
improve the function to cope instead. Per bug#2678 from Jeff Trout. The
specific example shown by Jeff is new in 8.1, but to be on the safe side
I'm backpatching 8.0 as well. We could patch 7.x similarly but I think
that's probably overkill, given the lack of evidence of old bugs of this ilk.
remaining functions, simplify pglz_compress's API to not require a useless
data copy when compression fails. Also add a check in pglz_decompress that
the expected amount of data was decompressed.
static variables. This avoids any risk of potential non-reentrancy,
and in particular offers a much cleaner workaround for the Intel compiler
bug that was affecting ginutil.c.
Buildfarm results from 'gazelle' show that there are indeed libedit
versions for which history.h is a needed header, even though it's
apparently been dropped entirely in other versions. Grumble.
Per Bob Friesenhahn's report, this file is not supplied by some versions
of libedit, and even when it is supplied it seems to be just a link to
readline.h, so we don't need to include it anyway.
Also, ensure that we won't try to use a too-old version of Bison.
The previous coding would bleat but then use it anyway; better to invoke
the 'missing' script if any grammar files need to be rebuilt.
gotten rather thoroughly whacked out by careless recent changes: the
intended ratio between the two was off by a lot, and the minimum number
of shared buffers tried had increased by a lot. Problem exposed by
failures on buildfarm members with smaller SHMMAX values.
repeatedly. Now that we don't have to worry about memory leaks from
glibc's qsort, we can safely put CHECK_FOR_INTERRUPTS into the tuplesort
comparators, as was requested a couple months ago. Also, get rid of
non-reentrancy and an extra level of function call in tuplesort.c by
providing a variant qsort_arg() API that passes an extra void * argument
through to the comparison routine. (We might want to use that in other
places too, I didn't look yet.)
1) Make vcbuild actually build the pgevent dll.
2) Change the pgevent DLL file so it doens't specify ordinal for the
functions. You're not supposed to do that. You're actually supposed to
declare them as PRIVATE as well, but mingw doesn't support that. VC++
will throw a warning and not an error though, so we can live with it.
Magnus Hagander
postgresql.conf.
- shared_buffers = 32000kB => 32MB
- temp_buffers = 8000kB => 8MB
- wal_buffers = 8 => 64kB
The code of initdb was a bit modified to write MB-unit values.
Values greater than 8000kB are rounded out to MB.
GUC_UNIT_XBLOCKS is added for wal_buffers. It is like GUC_UNIT_BLOCKS,
but uses XLOG_BLCKSZ instead of BLCKSZ.
Also, I cleaned up the test of GUC_UNIT_* flags in preparation to
add more unit flags in less bits.
ITAGAKI Takahiro
which turns out to be a dominant part of the runtime in scenarios
involving lots of parse-time warnings (such as Stephen Frost's example
of an INSERT with a lot of backslash-containing strings). There's not
a whole lot we can do about the character-at-a-time scanning, but we
can at least avoid traversing the query twice.
severity. This is to ensure the user can cancel a query that's spitting
out lots of notice/warning messages, even if they're coming from a loop
that doesn't otherwise contain a CHECK_FOR_INTERRUPTS. Per gripe from
Stephen Frost.
present; intervening positions are filled with nulls. This behavior
is required by SQL99 but was not implementable before 8.2 due to lack
of support for nulls in arrays. I have only made it work for the
one-dimensional case, which is all that SQL99 requires. It seems quite
complex to get it right in higher dimensions, and since we never allowed
extension at all in higher dimensions, I think that must count as a
future feature addition not a bug fix.
the SQL spec, viz IS NULL is true if all the row's fields are null, IS NOT
NULL is true if all the row's fields are not null. The former coding got
this right for a limited number of cases with IS NULL (ie, those where it
could disassemble a ROW constructor at parse time), but was entirely wrong
for IS NOT NULL. Per report from Teodor.
I desisted from changing the behavior for arrays, since on closer inspection
it's not clear that there's any support for that in the SQL spec. This
probably needs more consideration.
to performance. (A wholesale effort to get rid of strncpy should be
undertaken sometime, but not during beta.) This commit also fixes dynahash.c
to correctly truncate overlength string keys for hashtables, so that its
callers don't have to anymore.
wrong answer, as has been seen to occur with a buggy Linux kernel. Not
really our bug, but it's a simple test in a seldom-used control path,
so might as well have a defense.
'postmaster', so as not to depend on the existence of the postmaster
symlink. Also, implement postmaster-still-alive and postmaster-kill
operations for Windows, per Magnus.
return true for exactly the characters treated as whitespace by their flex
scanners. Per report from Victor Snezhko and subsequent investigation.
Also fix a passel of unsafe usages of <ctype.h> functions, that is, ye olde
char-vs-unsigned-char issue. I won't miss <ctype.h> when we are finally
able to stop using it.
(possibly (un)translated) letters that are actually expected as input.
Also reject invalid responses instead of silenty taken them as "no".
with help from Bernd Helmle
even when a single relation requires more than max_fsm_pages pages. Also,
make VACUUM emit a warning in this case, since it likely means that VACUUM
FULL or other drastic corrective measure is needed. Per reports from Jeff
Frost and others of unexpected changes in the claimed max_fsm_pages need.
is a large enough histogram, it will use the number of matches in the
histogram to derive a selectivity estimate, rather than the admittedly
pretty bogus heuristics involving examining the pattern contents. I set
'large enough' at 100, but perhaps we should change that later. Also
apply the same technique in contrib/ltree's <@ and @> estimator. Per
discussion with Stefan Kaltenbrunner and Matteo Beccati.
tables in the query compete for cache space, not just the one we are
currently costing an indexscan for. This seems more realistic, and it
definitely will help in examples recently exhibited by Stefan
Kaltenbrunner. To get the total size of all the tables involved, we must
tweak the handling of 'append relations' a bit --- formerly we looked up
information about the child tables on-the-fly during set_append_rel_pathlist,
but it needs to be done before we start doing any cost estimation, so
push it into the add_base_rels_to_query scan.
contrib functionality. Along the way, remove the USER_LOCKS configuration
symbol, since it no longer makes any sense to try to compile that out.
No user documentation yet ... mmoncure has promised to write some.
Thanks to Abhijit Menon-Sen for creating a first draft to work from.
oversight in original implementation of VALUES. Also fix an oversight
in recent addition of options to CREATE TABLE AS: they weren't getting
propagated if the query was a set-operation such as UNION.
the table being analyzed. This prevents two ANALYZEs from running
concurrently on the same table and possibly suffering concurrent-update
failures while trying to store their results into pg_statistic. The
downside is that a database-wide ANALYZE executed within a transaction
block will hold ShareUpdateExclusiveLock on many tables simultaneously,
which could lead to concurrency issues or even deadlock against another
such ANALYZE. However, this seems a corner case of less importance
than getting unexpected errors from a foreground ANALYZE when autovacuum
elects to analyze the same table concurrently. Per discussion.
after an error during VACUUM. We have a PG_TRY block anyway around the only
call sites, so just reset it in the CATCH clause instead of having
AtEOXact_Buffers blindly do it during xact end. I think the old code was
actively wrong for the case of a failure during ANALYZE inside a
subtransaction --- the flag wouldn't get cleared until main transaction end.
Probably not worth back-patching though.
and create a new view pg_timezone_names that provides information about
the zones known in the 'zic' database. Magnus Hagander, with some
additional work by Tom Lane.
Tom Lane
Peter Eisentraut
Andrew Dunstan
Bruce Momjian
Neil Conway
Michael Meskes
Teodor Sigaev
Alvaro Herrera
D'Arcy J.M. Cain
PostgreSQL Daemon
