Include the lefttype/righttype columns explicitly (instead of assuming
the reader can deduce them from the operator or function description),
and move the operator or function description to the end of the string,
to make it clearer that it's a referenced object and not the amop or
amproc item itself. Per extensive discussion of Andreas Karlsson's
original patch.
Andreas Karlsson, Tom Lane
This tool makes it possible to do the pg_start_backup/
copy files/pg_stop_backup step in a single command.
There are still some steps to be done before this is a
complete backup solution, such as the ability to stream
the required WAL logs, but it's still usable, and
could do with some buildfarm coverage.
In passing, make the checkpoint request optionally
fast instead of hardcoding it.
Magnus Hagander, reviewed by Fujii Masao and Dimitri Fontaine
As in commit fb4c5d2798 on 2011-01-21,
this avoids spurious debug messages and allows idempotent changes at
any time. Along the way, make assign_XactIsoLevel allow idempotent
changes even when not within a subtransaction, to be consistent with
the new coding of assign_transaction_read_only and because there's
no compelling reason to do otherwise.
Kevin Grittner, with some adjustments.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
The previous coding treated anything that wasn't an autovacuum launcher
as a normal backend, which is wrong now that we also have WAL senders.
Fujii Masao, reviewed by Robert Haas, Alvaro Herrera, Tom Lane,
and Bernd Helmle.
The new coding avoids a spurious debug message when a transaction
that has changed the isolation level has been rolled back. It also
allows the property to be freely changed to the current value within
a subtransaction.
Kevin Grittner, with one small change by me.
Failure to do so can lead to constraint violations. This was broken by
commit 1ddc2703a9 on 2010-02-07, so
back-patch to 9.0.
Noah Misch. Regression test by me.
We can get the length of a compressed or out-of-line datum without actually
detoasting it. If the lengths of two strings are unequal, we can then
conclude they are unequal without detoasting. That saves considerable work
in an admittedly less-common case, without costing anything much when the
optimization doesn't apply.
Noah Misch
If the slice to be assigned to was before the existing array lower bound
(requiring at least one null element to spring into existence to fill the
gap), the code miscalculated how many entries needed to be copied from
the old array's null bitmap. This could result in trashing the array's
data area (as seen in bug #5840 from Karsten Loesing), or worse.
This has been broken since we first allowed the behavior of assigning to
non-adjacent slices, in 8.2. Back-patch to all affected versions.
Otherwise WAL recovery will replay the un-flushed WAL after walreceiver has
exited, which can lead to a non-recoverable standby if the system crashes hard
at that point.
This closes a race condition where if a tablespace was created
after the enumeration happened but before the do_pg_start_backup()
was called, the backup would be incomplete. Now that it's done
while we are in backup mode, WAL replay will recreate it during
restore.
Noted by Heikki.
backend, as far as the postmaster shutdown logic is concerned. That means,
fast shutdown will wait for WAL sender processes to exit before signaling
bgwriter to finish. This avoids race conditions between a base backup stopping
or starting, and bgwriter writing the shutdown checkpoint WAL record. We don't
want e.g the end-of-backup WAL record to be written after the shutdown
checkpoint.
Makes it easier to parse mainly the BASE_BACKUP command
with it's options, and avoids having to manually deal
with quoted identifiers in the label (previously broken),
and makes it easier to add new commands and options in
the future.
In passing, refactor the case statement in the walsender
to put each command in it's own function.
When the exit waits until the whole backup completes, it may take
a very long time.
In passing, add back an error check in the main loop so we detect
clients that disconnect much earlier if the backup is large.
Fix broken test for pre-existing postmaster, caused by wrong code for
appending lines to the lockfile; don't write a failed listen_address
setting into the lockfile; don't arbitrarily change the location of the
data directory in the lockfile compared to previous releases; provide more
consistent and useful definitions of the socket path and listen_address
entries; avoid assuming that pg_ctl has the same DEFAULT_PGSOCKET_DIR as
the postmaster; assorted code style improvements.
This reverts commit d1001a78ce of 2010-12-05,
which was broken as reported by Jeff Davis. The problem is that the
individual planning steps may have side-effects on substructures of
PlannerGlobal, not only the current PlannerInfo root. Arranging to keep
all such side effects in the main planning context is probably possible,
but it would change this from a quick local hack into a wide-ranging and
rather fragile endeavor. Which it's not worth.
that can be read without blocking. It used to conclude that there isn't, even
though there was data in the socket receive buffer. That lead walreceiver to
flush the WAL after every received chunk, potentially causing big performance
issues.
Backpatch to 9.0, because the performance impact can be very significant.
Changing a file two directory levels deep under src/backend/ would not
cause the postgres binary to be rebuilt. This change fixes it, but no
one knows why.
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
Some versions of gcc complain about "variable `tablespaces' might be
clobbered by `longjmp' or `vfork'" with the original coding. Fix by
moving the PG_TRY block into a separate subroutine.
Per my note of a couple days ago, create_index_paths would refuse to
consider any path at all for GIN indexes if the selectivity estimate came
out as 1.0; not even if you tried to force it with enable_seqscan. While
this isn't really a bad outcome in practice, it could be annoying for
testing purposes. Adjust the test for "is this path only useful for
sorting" so that it doesn't fire on paths with nil pathkeys, which will
include all GIN paths.
When in streaming mode we can never get out, so it will never
be required, but after a base backup (or other operations)
we can get back to the loop, so the title needs to be cleared.
Add BASE_BACKUP command to walsender, allowing it to stream a
base backup to the client (in tar format). The syntax is still
far from ideal, that will be fixed in the switch to use a proper
grammar for walsender.
No client included yet, will come as a separate commit.
Magnus Hagander and Heikki Linnakangas
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
This applies the fix for bug #5784 to remaining places where we wish
to reject nulls in user-supplied arrays. In all these places, there's
no reason not to allow a null bitmap to be present, so long as none of
the current elements are actually null.
I did not change some other places where we are looking at system catalog
entries or aggregate transition values, as the presence of a null bitmap
in such an array would be suspicious.
This will support fixing contrib/intarray (and probably other places)
so that they don't have to fail on arrays that contain a null bitmap
but no live null entries.
The only reason this wasn't crashing while testing the core anyarray
operators was that it was disabled for those cases because of passing the
wrong type information to get_opfamily_proc :-(. So fix that too, and make
it insist on finding the support proc --- in hindsight, silently doing
nothing is not as sane a coping mechanism as all that.
The only use we have had for amindexnulls is in determining whether an
index is safe to cluster on; but since the addition of the amclusterable
flag, that usage is pretty redundant.
In passing, clean up assorted sloppiness from the last patch that touched
pg_am.h: Natts_pg_am was wrong, and ambuildempty was not documented.
The original coding could combine duplicate entries only when they
originated from the same qual condition. In particular it could not
combine cases where multiple qual conditions all give rise to full-index
scan requests, which is an expensive case well worth optimizing. Refactor
so that duplicates are recognized across all the quals.
which is stored in pg_largeobject_metadata.
No backpatch to 9.0 because you can't migrate from 9.0 to 9.0 with the
same catversion (because of tablespace conflict), and a pre-9.0
migration to 9.0 has not large object permissions to migrate.
Toast tables have identical pg_class.oid and pg_class.relfilenode, but
for clarity it is good to preserve the pg_class.oid.
Update comments regarding what is preserved, and do some
variable/function renaming for clarity.
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
Tom Lane
Magnus Hagander
Robert Haas
Heikki Linnakangas
Peter Eisentraut
Bruce Momjian
Itagaki Takahiro