TransactionIdDidAbort, when handling the case that xmin is one of the current
transaction's XIDs and the tuple has been deleted. xmax must also be one of
the current transaction's XIDs, since no one else can see it yet, and it's
cheaper to look at local state than shared state to find out if xmax aborted.
Per an idea of Heikki's.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
pointer" in every Snapshot struct. This allows removal of the case-by-case
tests in HeapTupleSatisfiesVisibility, which should make it a bit faster
(I didn't try any performance tests though). More importantly, we are no
longer violating portable C practices by assuming that small integers are
distinct from all pointer values, and HeapTupleSatisfiesDirty no longer
has a non-reentrant API involving side-effects on a global variable.
There were a couple of places calling HeapTupleSatisfiesXXX routines
directly rather than through the HeapTupleSatisfiesVisibility macro.
Since these places had to be changed anyway, I chose to make them go
through the macro for uniformity.
Along the way I renamed HeapTupleSatisfiesSnapshot to HeapTupleSatisfiesMVCC
to emphasize that it's only used with MVCC-type snapshots. I was sorely
tempted to rename HeapTupleSatisfiesVisibility to HeapTupleSatisfiesSnapshot,
but forebore for the moment to avoid confusion and reduce the likelihood that
this patch breaks some of the pending patches. Might want to reconsider
doing that later.
cases where we already hold the desired lock "indirectly", either via
membership in a MultiXact or because the lock was originally taken by a
different subtransaction of the current transaction. These cases must be
accounted for to avoid needless deadlocks and/or inappropriate replacement of
an exclusive lock with a shared lock. Per report from Clarence Gardner and
subsequent investigation.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
PGPROC array into snapshots, and use this information to avoid visits
to pg_subtrans in HeapTupleSatisfiesSnapshot. This appears to solve
the pg_subtrans-related context swap storm problem that's been reported
by several people for 8.1. While at it, modify GetSnapshotData to not
take an exclusive lock on ProcArrayLock, as closer analysis shows that
shared lock is always sufficient.
Itagaki Takahiro and Tom Lane
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
before we check commit/abort status. Formerly this was done in some paths
but not all, with the result that a transaction might be considered
committed for some purposes before it became committed for others.
Per example found by Jan Wieck.
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
http://archives.postgresql.org/pgsql-hackers/2004-10/msg00464.php.
This fix is intended to be permanent: it moves the responsibility for
calling SetBufferCommitInfoNeedsSave() into the tqual.c routines,
eliminating the requirement for callers to test whether t_infomask changed.
Also, tighten validity checking on buffer IDs in bufmgr.c --- several
routines were paranoid about out-of-range shared buffer numbers but not
about out-of-range local ones, which seems a tad pointless.
pg_subtrans --- what we need is the oldest xmin of any snapshot in use
in the current top transaction. Introduce a new variable TransactionXmin
to play this role. Fixes intermittent regression failure reported by
Neil Conway.
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
discussion on pgsql-hackers: in READ COMMITTED mode we just have to force
a QuerySnapshot update in the trigger, but in SERIALIZABLE mode we have
to run the scan under a current snapshot and then complain if any rows
would be updated/deleted that are not visible in the transaction snapshot.
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
difference between INSERT_IN_PROGRESS and DELETE_IN_PROGRESS for
tuples inserted and then deleted by a concurrent transaction.
Example of bug:
regression=# create table foo (f1 int);
CREATE TABLE
regression=# begin;
BEGIN
regression=# insert into foo values(1);
INSERT 195531 1
regression=# delete from foo;
DELETE 1
regression=# insert into foo values(1);
INSERT 195532 1
regression=# create unique index fooi on foo(f1);
ERROR: could not create unique index
DETAIL: Table contains duplicated values.
>> actually having updated the tuple, [...] can we simply
>> set the HEAP_XMAX_INVALID hint bit of the tuple?
>
>AFAICS this is a reasonable thing to do.
Thanks for the confirmation. Here's a patch which also contains some
more noncritical changes to tqual.c:
. make code more readable by introducing local variables for xvac
. no longer two separate branches for aborted and crashed.
The actions were the same in all cases.
Manfred Koizar
free'd for every transaction or statement, respectively. This patch
puts these data structures into static memory, thus saving a few CPU
cycles and two malloc calls per transaction or (in isolation level
READ COMMITTED) per query.
Manfred Koizar
into postgres.c; make sure it happens for all cases that seem to need it.
Perhaps it would be better to explicitly exclude just a few utility
statement types from setting a snapshot?
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
tuple header. The fix is based on the thought that HEAP_MOVED_IN is
not needed any more as soon as HEAP_XMIN_COMMITTED has been set. So
in tqual.c and vacuum.c the HEAP_MOVED bits are cleared when
HEAP_XMIN_COMMITTED is set.
Vacuum robustness is enhanced by rearranging ifs, so that we have a
chance to elog(ERROR, ...) before an assertion fails.
A new regression test is included.
Manfred Koizar