duplicative -DFRONTEND flags from many Makefiles. We still need Makefile
control of the symbol in a few places that compile frontend-or-backend
src/port/ files, but it's a lot cleaner than before.
Hiroshi Saito
the same transaction can be identified even when no regular XID was assigned.
This seems essential after addition of the lazy-XID patch. Also some
minor code cleanup in write_csvlog().
happen condition can happen given incorrect input. The real problem is that
gram.y should try harder to distinguish * from "*" --- the latter is a legal
column name per spec, and someday we ought to treat it that way. However
fixing that is too invasive for a back-patch, and it's too late for the 8.3
cycle too. So just reduce the Assert to a plain elog for now. Per report
from NikhilS.
decompression of an already-compressed external value when we have to copy
it; save a few cycles when a value is too short for compression; and
annotate various lines that are currently unreachable.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
join search order portion of the planner; this is specifically intended to
simplify developing a replacement for GEQO planning. Patch by Julius
Stroffek, editorialized on by me. I renamed make_one_rel_by_joins to
standard_join_search and make_rels_by_joins to join_search_one_level to better
reflect their place within this scheme.
and up), per Chris Marcellino. This avoids consuming O(N^2) file
descriptors to support N backends. Tests suggest it's about a wash for
small installations, but large ones would have a problem.
word comes before the weight instead of after. This will allow future
binary-compatible extension of the representation to support compact formats,
as discussed on pgsql-hackers around 2007/06/18. The reason to do it now is
that we've already pretty well broken any chance of simple in-place upgrade
from 8.2 to 8.3, but it's possible that 8.3 to 8.4 (or whenever we get around
to squeezing NUMERIC) could otherwise be data-compatible.
bgwriter_lru_maxpages is exceeded leaves the loop variables in the
expected state. In the original coding, we'd fail to advance
next_to_clean, causing that buffer to be probably-uselessly rechecked next
time, and also have an off-by-one idea of the number of buffers scanned.
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
table, by allocating just enough for a hardcoded number of dead tuples per
page. The current estimate is 200 dead tuples per page.
Per reports from Jeff Amiel, Erik Jones and Marko Kreen, and subsequent
discussion.
CVS: ----------------------------------------------------------------------
CVS: Enter Log. Lines beginning with `CVS:' are removed automatically
CVS:
CVS: Committing in .
CVS:
CVS: Modified Files:
CVS: commands/vacuumlazy.c
CVS: ----------------------------------------------------------------------
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
later than latestCompletedXid, per Florian Pflug. Also some minor
improvements in the XIDCACHE_DEBUG code --- make sure each call of
TransactionIdIsInProgress is counted one way or another.
out at erratic times, because it is creating a totally unacceptable level
of noise in our buildfarm results. This patch can be reverted when and if
the code is fixed to not issue notices during cache reload events.
(because they are uncorrelated with the immediate parent query). We were
charging the full run cost to the parent node, disregarding the fact that
only one row need be fetched for EXISTS. While this would only be a
cosmetic issue in most cases, it might possibly affect planning outcomes
if the parent query were itself a subquery to some upper query.
Per recent discussion with Steve Crawford.
buildfarm member grebe, I see no reason to revert the 1-byte-header-friendly
changes I made in varlena.c. Instead, tweak the code a little bit to
get more advantage out of that.
character encodings that doesn't involve calling lower(). This should
cure the performance regression in this case complained of by Guillaume
Smet. It still leaves the horrid performance for multi-byte encodings
introduced in 8.2, but there's no obvious solution for that in sight.
demonstrably necessary for text_substring() since regexp_split functions
may pass it such a value; and we might as well convert the whole file
at once. Per buildfarm results (though I wonder why most machines aren't
showing a failure).
to not cause needless copying of text datums that have 1-byte headers.
Greg Stark, in response to performance gripe from Guillaume Smet and
ITAGAKI Takahiro.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
TransactionIdDidAbort, when handling the case that xmin is one of the current
transaction's XIDs and the tuple has been deleted. xmax must also be one of
the current transaction's XIDs, since no one else can see it yet, and it's
cheaper to look at local state than shared state to find out if xmax aborted.
Per an idea of Heikki's.
For XIDs of our own transaction and subtransactions, it's cheaper to ask
TransactionIdIsCurrentTransactionId() than to look in shared memory.
Also, the xids[] work array is always the same size within any given
process, so malloc it just once instead of doing a palloc/pfree on every
call; aside from being faster this lets us get rid of some goto's, since
we no longer have any end-of-function pfree to do. Both ideas by Heikki.
has a bad habit of launching multiple threads within the backend and thereby
causing all kinds of havoc. Fortunately, we don't need it, and recent Tcl
versions provide an easy way to disable it. Diagnosis and fix by
Steve Marshall, Paul Bayer, and Doug Knight of WSI Corporation.
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
values. The previous coding essentially assumed that x = sqrt(x*x), which
does not hold for x < 0.
Thanks to Jie Zhang at Greenplum and Gavin Sherry for reporting this
issue.
database via builtin functions, as recently discussed on -hackers.
chr() now returns a character in the database encoding. For UTF8 encoded databases
the argument is treated as a Unicode code point. For other multi-byte encodings
the argument must designate a strict ascii character, or an error is raised,
as is also the case if the argument is 0.
ascii() is adjusted so that it remains the inverse of chr().
The two argument form of convert() is gone, and the three argument form now
takes a bytea first argument and returns a bytea. To cover this loss three new
functions are introduced:
. convert_from(bytea, name) returns text - converts the first argument from the
named encoding to the database encoding
. convert_to(text, name) returns bytea - converts the first argument from the
database encoding to the named encoding
. length(bytea, name) returns int - gives the length of the first argument in
characters in the named encoding
we'd dump core anyway immediately afterward if it were null; and it
seems to confuse some versions of icc into generating bad code.
Per report from Sergey Koposov. Patched in HEAD only, for the moment,
since this is only likely to affect developers.
no-longer-needed pages at the end of a table. We thought we could throw away
pages containing HEAPTUPLE_DEAD tuples; but this is not so, because such
tuples very likely have index entries pointing at them, and we wouldn't have
removed the index entries. The problem only emerges in a somewhat unlikely
race condition: the dead tuples have to have been inserted by a transaction
that later aborted, and this has to have happened between VACUUM's initial
scan of the page and then rechecking it for empty in count_nondeletable_pages.
But that timespan will include an index-cleaning pass, so it's not all that
hard to hit. This seems to explain a couple of previously unsolved bug
reports.
* adds a few missing words to some commands (like adding GIN as a valid
index type or OWNED BY for ALTER SEQUENCE,...)
* support for ALTER TABLE foo ENABLE/DISABLE REPLICA TRIGGER/RULE
* autocomplete CREATE DATABASE foo TEMPLATE (mostly done to prevent
conflicts with the TEMPLATE keyword for text search)
* support for ALTER/CREATE/DROP TEXT SEARCH as well as COMMENT ON TEXT
SEARCH and the corresponding psql backslash commands.
This proved a little more difficult than expected due to the fact that
words_after_create[] is used for two purposes - one is to provide a list
of words that follow immediatly after CREATE (or DROP) and the other
purpose is to use it for autocompleting anywhere in the statement if the
word in that struct is found with a query.
Since TEXT SEARCH CONFIGURATION|DICTIONARY|TEMPLATE|PARSER results in 3
words instead of one (as all the other words in that list are) I added a
flag to the struct to tell create_command_generator() to skip that entry
for autocompleting immediatly after CREATE which feels like a dirty
hack (but that holds true for a lot of code in tab-complete.c).
Stefan Kaltenbrunner
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
recover from elog(ERROR). Problem was created by introduction of hash seq
search tracking awhile back, and affects all branches that have bgwriter;
in HEAD the disease has snuck into autovacuum and walwriter too. (Not sure
that the latter two use hash_seq_search at the moment, but surely they might
someday.) Per report from Sergey Koposov.
Rename synonym.syn.sample and thesaurs.ths.sample to
synonym_sample.syn and thesaurs_sample.ths accordingly to be able to use they
in regression test.
Ispell dictionary uses synthetic simple dictionary files.
* Defined new struct WordEntryPosVector that holds a uint16 length and a
variable size array of WordEntries. This replaces the previous
convention of a variable size uint16 array, with the first element
implying the length. WordEntryPosVector has the same layout in memory,
but is more readable in source code. The POSDATAPTR and POSDATALEN
macros are still used, though it would now be more readable to access
the fields in WordEntryPosVector directly.
* Removed needfree field from DocRepresentation. It was always set to false.
* Miscellaneous other commenting and refactoring
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
an exclusive lock on the table at this point, which we want to release as soon
as possible. This is called in the phase of lazy vacuum where we truncate the
empty pages at the end of the table.
An alternative solution would be to lower the vacuum delay settings before
starting the truncating phase, but this doesn't work very well in autovacuum
due to the autobalancing code (which can cause other processes to change our
cost delay settings). This case could be considered in the balancing code, but
it is simpler this way.
Apparently it's a bug I introduced when I refactored spell.c to use the
readline function for reading and recoding the input file. I didn't
notice that some calls to STRNCMP used the non-lowercased version of the
input line.
and in passing, fix some bogosities dating from the custom_variable_classes
patch. Fix guc-file.l to correctly check changes in custom_variable_classes
that are attempted concurrently with additions/removals of custom variables,
and don't allow the new setting to be applied in advance of checking it.
Clean up messy and undocumented situation for string variables with NULL
boot_val. Fix DefineCustomVariable functions to initialize boot_val
correctly. Prevent find_option from inserting bogus placeholders for custom
variables that are simply inquired about rather than being set.
ReadNewTransactionId from GetSnapshotData --- with a "latestCompletedXid"
variable that is updated during transaction commit or abort. Since
latestCompletedXid is written only in places that had to lock ProcArrayLock
exclusively anyway, and is read only in places that had to lock ProcArrayLock
shared anyway, it adds no new locking requirements to the system despite being
cluster-wide. Moreover, removing ReadNewTransactionId from snapshot
acquisition eliminates the need to take both XidGenLock and ProcArrayLock at
the same time. Since XidGenLock is sometimes held across I/O this can be a
significant win. Some preliminary benchmarking suggested that this patch has
no effect on average throughput but can significantly improve the worst-case
transaction times seen in pgbench. Concept by Florian Pflug, implementation
by Tom Lane.
no need for serialization against snapshot-taking because the xact doesn't
affect anyone else's snapshot anyway. Per discussion. Also, move various
info about the interlocking of transactions and snapshots out of code comments
and into a hopefully-more-cohesive discussion in access/transam/README.
Also, remove a couple of now-obsolete comments about having to force some WAL
to be written to persuade RecordTransactionCommit to do its thing.
big misalignement, then it tries to split page basing on distribution
of boxe's centers.
Per report from Dolafi, Tom <dolafit@janelia.hhmi.org>
Backpatch is needed, change doesn't affect on-disk storage.
- change the alignment requirement of lexemes in TSVector slightly.
Lexeme strings were always padded to 2-byte aligned length to make sure
that if there's position array (uint16[]) it has the right alignment.
The patch changes that so that the padding is not done when there's no
positions. That makes the storage of tsvectors without positions
slightly more compact.
- added some #include "miscadmin.h" lines I missed in the earlier when I
added calls to check_stack_depth().
- Reimplement the send/recv functions, and added a comment
above them describing the on-wire format. The CRC is now recalculated in
tsquery as well per previous discussion.
- add code to check that the query tree is well-formed. It was indeed
possible to send malformed queries in binary mode, which produced all
kinds of strange results.
- make the left-field a uint32. There's no reason to
arbitrarily limit it to 16-bits, and it won't increase the disk/memory
footprint either now that QueryOperator and QueryOperand are separate
structs.
- add check_stack_depth() call to all recursive functions I found.
Some of them might have a natural limit so that you can't force
arbitrarily deep recursions, but check_stack_depth() is cheap enough
that seems best to just stick it into anything that might be a problem.
small editorization by me
- Brake the QueryItem struct into QueryOperator and QueryOperand.
Type was really the only common field between them. QueryItem still
exists, and is used in the TSQuery struct as before, but it's now a
union of the two. Many other changes fell from that, like separation
of pushval_asis function into pushValue, pushOperator and pushStop.
- Moved some structs that were for internal use only from header files
to the right .c-files.
- Moved tsvector parser to a new tsvector_parser.c file. Parser code was
about half of the size of tsvector.c, it's also used from tsquery.c, and
it has some data structures of its own, so it seems better to separate
it. Cleaned up the API so that TSVectorParserState is not accessed from
outside tsvector_parser.c.
- Separated enumerations (#defines, really) used for QueryItem.type
field and as return codes from gettoken_query. It was just accidental
code sharing.
- Removed ParseQueryNode struct used internally by makepol and friends.
push*-functions now construct QueryItems directly.
- Changed int4 variables to just ints for variables like "i" or "array
size", where the storage-size was not significant.
null::char(3) to a simple Const node. (It already worked for non-null values,
but not when we skipped evaluation of a strict coercion function.) This
prevents loss of typmod knowledge in situations such as exhibited in bug
#3598. Unfortunately there seems no good way to fix that bug in 8.1 and 8.2,
because they simply don't carry a typmod for a plain Const node.
In passing I made all the other callers of makeNullConst supply "real" typmod
values too, though I think it probably doesn't matter anywhere else.
that examine fields that could change under them. This is just to make
really sure that when we are fetching a value 'only once', that's what
actually happens. Possibly this is a bug that should be back-patched,
but in the absence of solid evidence that it's needed, I won't bother.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
initcap style --- the vast majority of the existing descriptions do not use
an initial cap. I didn't change places where the first word was all-cap.
initdb not forced because this doesn't change any regression test results.
operator-family rewrite. I had mistakenly supposed that these could use the
pg_amproc entries for text[] and inet[] respectively. However, binary
compatibility of the underlying types does not make two array types binary
compatible (since they must differ in the header field that gives the element
type OID), and so the index support code doesn't consider those entries
applicable. Add back the missing pg_amproc entries, and add an opr_sanity
query to try to catch such mistakes in future. Per report from Gregory
Maxwell.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
regardless of the number of tuples involved, it's incorrect to skip it
when memtupcount = 1; the number of cycles saved is minuscule anyway.
An alternative solution would be to pull the state changes out to the
call site in tuplesort_performsort, but keeping them near the corresponding
changes in make_bounded_heap seems marginally cleaner. Noticed by
Greg Stark.
the number of rows likely to be produced by a query such as
SELECT * FROM t1 LEFT JOIN t2 USING (key) WHERE t2.key IS NULL;
What this is doing is selecting for t1 rows with no match in t2, and thus
it may produce a significant number of rows even if the t2.key table column
contains no nulls at all. 8.2 thinks the table column's null fraction is
relevant and thus may estimate no rows out, which results in terrible plans
if there are more joins above this one. A proper fix for this will involve
passing much more information about the context of a clause to the selectivity
estimator functions than we ever have. There's no time left to write such a
patch for 8.3, and it wouldn't be back-patchable into 8.2 anyway. Instead,
put in an ad-hoc test to defeat the normal table-stats-based estimation when
an IS NULL test is evaluated at an outer join, and just use a constant
estimate instead --- I went with 0.5 for lack of a better idea. This won't
catch every case but it will catch the typical ways of writing such queries,
and it seems unlikely to make things worse for other queries.
generating the tuples has resjunk output columns. This is not possible for
simple table scans but can happen when evaluating a whole-row Var for a view.
Per example from Patryk Kordylewski. The problem exists back to 8.0 but
I'm not going to risk back-patching further than 8.2 because of the many
changes in this area.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
checks for individual-table-size functions, since anyone in the database could
get approximate values from pg_class.relpages anyway. Allow database-size to
users with CONNECT privilege for the target database (note that this is
granted by default). Allow tablespace-size if the user has CREATE privilege
on the tablespace (which is *not* granted by default), or if the tablespace is
the default tablespace for the current database (since we treat that as
implicitly allowing use of the tablespace).
read from the temp file didn't match the file length reported by ftello(),
the wrong variable's value was printed, and so the message made no sense.
Clean up a couple other coding infelicities while at it.
even if the "deadlock detected" ERROR message is suppressed by an exception
catcher. Be clearer about the event sequence when a soft deadlock is fixed:
the fixing process might or might not still have to wait, so log that
separately. Fix race condition when someone releases us from the lock partway
through printing all this junk --- we'd not get confused about our state, but
the log message sequence could have been misleading, ie, a "still waiting"
message with no subsequent "acquired" message. Greg Stark and Tom Lane.
namespace isn't necessarily first in the search path (there could be implicit
schemas ahead of it). Examples are
test=# set search_path TO s1;
test=# create view pg_timezone_names as select * from pg_timezone_names();
ERROR: "pg_timezone_names" is already a view
test=# create table pg_class (f1 int primary key);
ERROR: permission denied: "pg_class" is a system catalog
You'd expect these commands to create the requested objects in s1, since
names beginning with pg_ aren't supposed to be reserved anymore. What is
happening is that we create the requested base table and then execute
additional commands (here, CREATE RULE or CREATE INDEX), and that code is
passed the same RangeVar that was in the original command. Since that
RangeVar has schemaname = NULL, the secondary commands think they should do a
path search, and that means they find system catalogs that are implicitly in
front of s1 in the search path.
This is perilously close to being a security hole: if the secondary command
failed to apply a permission check then it'd be possible for unprivileged
users to make schema modifications to system catalogs. But as far as I can
find, there is no code path in which a check doesn't occur. Which makes it
just a weird corner-case bug for people who are silly enough to want to
name their tables the same as a system catalog.
The relevant code has changed quite a bit since 8.2, which means this patch
wouldn't work as-is in the back branches. Since it's a corner case no one
has reported from the field, I'm not going to bother trying to back-patch.
days that was obsolete the moment we had IN (SELECT ...) capability.
It's arguably a security hole since it applied no permissions check to
the table it searched, and since it was never documented anywhere,
removing it seems more appropriate than fixing it.
and pg_tablespace_size to superusers. Perhaps we could weaken the first
case to just require SELECT privilege, but that doesn't work for the
other cases, so use ownership as the common concept.
While it's not clear that TID linkage info is of any great use to a
nefarious user, it's certainly unexpected that these functions wouldn't
insist on read privileges.
but just hardwire the specified timezone database path into the executable.
Per discussion, this avoids some packaging disadvantages of using a
symlink.
relcache entry after having heap_close'd it. This could lead to misbehavior
if a relcache flush wiped out the cache entry meanwhile. In 8.2 there is a
very real risk of CREATE INDEX CONCURRENTLY using the wrong relid for locking
and waiting purposes. I think the bug is only cosmetic in 8.0 and 8.1,
because their transgression is limited to using RelationGetRelationName(rel)
in an ereport message immediately after heap_close, and there's no way (except
with special debugging options) for a cache flush to occur in that interval.
Not quite sure that it's cosmetic in 7.4, but seems best to patch anyway.
Found by trying to run the regression tests with CLOBBER_CACHE_ALWAYS enabled.
Maybe we should try to do that on a regular basis --- it's awfully slow,
but perhaps some fast buildfarm machine could do it once in awhile.
- ispell initialization crashed on empty dictionary file
- ispell initialization crashed on affix file with prefixes but no suffixes
- stop words file was run through pg_verify_mbstr, with database
encoding, but it's supposed to be UTF-8; similar bug for synonym files
- bunch of comments added, typos fixed, and other cleanup
Introduced consistent encoding checking/conversion of data read from tsearch
configuration files, by doing this in a single t_readline() subroutine
(replacing direct usages of fgets). Cleaned up API for readstopwords too.
Heikki Linnakangas
This prevents needing to do complex and poorly-defined updates of the
mapping table if the new parser has different token types than the old.
Per discussion.
init options of the template as top-level options in the syntax. This also
makes ALTER a bit easier to use, since options can be replaced individually.
I also made these statements verify that the tmplinit method will accept
the new settings before they get stored; in the original coding you didn't
find out about mistakes until the dictionary got invoked.
Under the hood, init methods now get options as a List of DefElem instead
of a raw text string --- that lets tsearch use existing options-pushing code
instead of duplicating functionality.
'with map' parameter; as things now stand there's really not much point
in specifying a config-to-copy if you don't copy its map. Also, use
COPY instead of TEMPLATE as the key word for a config-to-copy, so as
to avoid confusion with text search templates. Per discussion; the
just-committed reference page for the command already describes it
this way.
There's not much point in prettifying machine-generated code, and it
seems best to keep these files exactly like upstream anyway. Also add
some notes about why various files are excluded.
byte after the last full byte of the bit array, regardless of whether that
byte was part of the valid data or not. Found by buildfarm testing.
Thanks to Stefan Kaltenbrunner for nailing down the cause.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
are not one of the query's defined result relations, but nonetheless have
triggers fired against them while the query is active. This was formerly
impossible but can now occur because of my recent patch to fix the firing
order for RI triggers. Caching a ResultRelInfo avoids duplicating work by
repeatedly opening and closing the same relation, and also allows EXPLAIN
ANALYZE to "see" and report on these extra triggers. Use the same mechanism
to cache open relations when firing deferred triggers at transaction shutdown;
this replaces the former one-element-cache strategy used in that case, and
should improve performance a bit when there are deferred triggers on a number
of relations.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
that still thought they could set HEAP_XMAX_COMMITTED immediately after
seeing the other transaction commit. Make them use the same logic as
tqual.c does to determine if the hint bit can be set yet.
- Really prepare statements
- Added more regression tests
- Added auto-prepare mode
- Use '$n' for positional variables, '?' is still possible via ecpg option
- Cleaned up the sources a little bit
First, we cannot assume that XLogAsyncCommitFlush guarantees hint bits will be
settable, because clog.c's inexact LSN bookkeeping results in windows where a
previously flushed transaction is considered unhintable because it shares an
LSN slot with a later unflushed transaction. But repair_frag requires
XMIN_COMMITTED to be correct so that it can distinguish tuples moved by the
current vacuum. Since not being able to set the bit is an uncommon corner
case, the most practical way of dealing with it seems to be to abandon
shrinking (ie, don't invoke repair_frag) when we find a non-dead tuple whose
XMIN_COMMITTED bit couldn't be set.
Second, it is possible for the same reason that a RECENTLY_DEAD tuple does not
get its XMAX_COMMITTED bit set during scan_heap. But by the time repair_frag
examines the tuple it might be possible to set the bit. We therefore must
take buffer content lock when calling HeapTupleSatisfiesVacuum a second time,
else we can get an Assert failure in SetBufferCommitInfoNeedsSave. This
latter bug is latent in existing releases, but I think it cannot actually
occur without async commit, since the first HeapTupleSatisfiesVacuum call
should always have set the bit. So I'm not going to back-patch it.
In passing, reduce the existing "cannot shrink relation" messages from NOTICE
to LOG level. The new message must be no higher than LOG if we don't want
unpredictable regression test failures, and consistency seems like a good
idea. Also arrange that only one such message is reported per VACUUM FULL;
in typical scenarios you could get spammed with many such messages, which
seems a bit useless.
enlarge the memory chunk in-place when it was feasible to do so. This turns
out to not work well at all for scenarios involving repeated cycles of
palloc/repalloc/pfree: the eventually freed chunks go into the wrong freelist
for the next initial palloc request, and so we consume memory indefinitely.
While that could be defended against, the number of cases where the
optimization can still be applied drops significantly, and adjusting the
initial sizes of StringInfo buffers makes it drop to almost nothing.
Seems better to just remove the extra complexity.
Per recent discussion and testing.
likewise increase the initial size of the scanner's literal buffer to 1024
(from 128). Instrumentation of the regression tests suggests that this
saves a useful amount of repalloc() traffic --- the number of calls occurring
during one set of tests drops from about 6900 to about 3900. The old sizes
were chosen in the late 90's with an eye to machines much smaller than
are common today.
regexp_split_to_table() within a single query. This is only a partial
solution, as it turns out that with enough matches per string these
functions can also tickle a repalloc() misbehavior. But fixing that
is a topic for a separate patch.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
constant flow of new connection requests could prevent the postmaster from
completing a shutdown or crash restart. This is done by labeling child
processes that are "dead ends", that is, we know that they were launched only
to tell a client that it can't connect. These processes are managed
separately so that they don't confuse us into thinking that we can't advance
to the next stage of a shutdown or restart sequence, until the very end
where we must wait for them to drain out so we can delete the shmem segment.
Per discussion of a misbehavior reported by Keaton Adams.
Since this code was baroque already, and my first attempt at fixing the
problem made it entirely impenetrable, I took the opportunity to rewrite it
in a state-machine style. That eliminates some duplicated code sections and
hopefully makes everything a bit clearer.
hash table is allocated in a child context of the agg node's memory
context, MemoryContextReset() will reset but *not* delete the child
context. Since ExecReScanAgg() proceeds to build a new hash table
from scratch (in a new sub-context), this results in leaking the
header for the previous memory context. Therefore, use
MemoryContextResetAndDeleteChildren() instead.
Credit: My colleague Sailesh Krishnamurthy at Truviso for isolating
the cause of the leak.
child memory contexts is indented two spaces to the right of its
parent context. This should make it easier to deduce the memory
context hierarchy from the output of MemoryContextStats().
between the setting of log_line_prefix and the setting of log_timezone. We
can't realistically set log_timezone any earlier than we do now, so the best
behavior seems to be to use GMT zone if any timestamps are to be logged during
early startup. Create a dummy zone variable with a minimal definition of GMT
(in particular it will never know about leap seconds), so that we can set it
up without reference to any external files.
as well as regular backends: if no regular backend launches before the autovac
launcher tries to start an autovac worker, the postmaster would get an Assert
fault due to calling PostmasterRandom before random_seed was initialized.
Cleanest solution seems to be to take the initialization of random_seed out
of ServerLoop and let PostmasterRandom do it for itself.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
not bothering to initialize is_autovacuum for regular backends, meaning there
was a significant chance of the postmaster prematurely sending them SIGTERM
during database shutdown. Also, leaving the cancel key unset for an autovac
worker meant that any client could send it SIGINT, which doesn't sound
especially good either.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
CVS HEAD does not contain this bug due to EquivalenceClass rewrite, but it
seems wise to include the regression test for it anyway.
with the recent patch to log temp file sizes at removal time. Doesn't seem
worth fixing since it's unused.
In passing, make a few elog messages conform to the message style guide.
named pg_toast_temp_nnn, alongside the pg_temp_nnn schemas used for the temp
tables themselves. This allows low-level code such as the relcache to
recognize that these tables are indeed temporary, which enables various
optimizations such as not WAL-logging changes and using local rather than
shared buffers for access. Aside from obvious performance benefits, this
provides a solution to bug #3483, in which other backends unexpectedly held
open file references to temporary tables. The scheme preserves the property
that TOAST tables are not in any schema that's normally in the search path,
so they don't conflict with user table names.
initdb forced because of changes in system view definitions.
sugar for PL/PgSQL set-returning functions that want to return the result
of evaluating a query; it should also be more efficient than repeated
RETURN NEXT statements. Based on an earlier patch from Pavel Stehule.
checking whether an IS NULL/IS NOT NULL clause is implied or refuted by
a strict function. Per example from Dawid Kuroczko.
Backpatch to 8.2 since this is arguably a performance bug.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
I/O utilization, per discussion.
While at it, lower the autovacuum vacuum and analyze threshold values to 50
tuples. It is a bit higher (i.e. more conservative) than what I originally
proposed but much better than the old values for small tables.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
log_min_error_statement is active and there is some problem in logging the
current query string; for example, that it's too long to include in the log
message without running out of memory. This problem has existed since the
log_min_error_statement feature was introduced. No doubt the reason it
wasn't detected long ago is that 8.2 is the first release that defaults
log_min_error_statement to less than PANIC level.
Per report from Bill Moran.
truncated relation was deleted later in the WAL sequence. Since replay
normally auto-creates a relation upon its first reference by a WAL log entry,
failure is seen only if the truncate entry happens to be the first reference
after the checkpoint we're restarting from; which is a pretty unusual case but
of course not impossible. Fix by making truncate entries auto-create like
the other ones do. Per report and test case from Dharmendra Goyal.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
a MIN or MAX aggregate call into an indexscan: the initplan is being made at
the current query nesting level and so we shouldn't increment query_level.
Though usually harmless, this mistake could lead to bogus "plan should not
reference subplan's variable" failures on complex queries. Per bug report
from David Sanchez i Gregori.
referencing table does not change the tuple's FK column(s), we don't bother
to check the PK table since the constraint was presumably already valid.
However, the check is still necessary if the tuple was inserted by our own
transaction, since in that case the INSERT trigger will conclude it need not
make the check (since its version of the tuple has been deleted). We got this
right for simple cases, but not when the insert and update are in different
subtransactions of the current top-level transaction; in such cases the FK
check would never be made at all. (Hence, problem dates back to 8.0 when
subtransactions were added --- it's actually the subtransaction version of a
bug fixed in 7.3.5.) Fix, and add regression test cases. Report and fix by
Affan Salman.
been broken since forever, but was not noticed because people seldom look
at raw parse trees. AFAIK, no impact on users except that debug_print_parse
might fail; but patch it all the way back anyway. Per report from Jeff Ross.
name. With this patch, it is always possible for the user to qualify a
plpgsql variable name if needed to avoid ambiguity. While there is much more
work to be done in this area, this simple change removes one unnecessary
incompatibility with Oracle. Per discussion.
theoretically vary depending on what the compile-time locale setting is.
Hence, force it to see LC_CTYPE=C to ensure consistent build results.
(It's likely that this makes no difference in practice, since our
specification for "identifier" surely includes both ends of any possible
uppercase/lowercase pair anyway. But it should silence warnings about
ambiguous character classes that are reported by some buildfarm members.)
sanely if the loop value overflows int32 on the way to the end value.
Avoid useless computation of "SELECT 1" when BY is omitted. Avoid some
type-punning between Datum and int4 that dates from the original coding.
from old versions of gcc. It's not clear to me that this is really
necessary for correctness, but less warnings are always good.
Per buildfarm results and local testing.
Andrew Dunstan
Tom Lane
Alvaro Herrera
Magnus Hagander
Michael Meskes
Teodor Sigaev
Peter Eisentraut
Neil Conway
Bruce Momjian