Operation", merged from upgrade sections in "Installation from Source
Code" and "Backup and Restore". This now gives a single place for all
upgrade information.
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
This tool makes it possible to do the pg_start_backup/
copy files/pg_stop_backup step in a single command.
There are still some steps to be done before this is a
complete backup solution, such as the ability to stream
the required WAL logs, but it's still usable, and
could do with some buildfarm coverage.
In passing, make the checkpoint request optionally
fast instead of hardcoding it.
Magnus Hagander, reviewed by Fujii Masao and Dimitri Fontaine
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
In 8.4 and prior, WAL-logging could potentially be skipped whenever
archive_mode=off. With streaming replication, this is now true only
if max_wal_senders=0.
Fujii Masao, with light copyediting by me
The endterm attribute is mainly useful when the toolchain does not support
automatic link target text generation for a particular situation. In the
past, this was required by the man page tools for all reference page links,
but that is no longer the case, and it now actually gets in the way of
proper automatic link text generation. The only remaining use cases are
currently xrefs to refsects.
sections under "High Availability, Load Balancing, and Replication"
chapter. Streaming replication chapter needs a lot more work, but this
commit just moves things around.
woken by alarm we send SIGUSR1 to all backends requesting that they
check to see if they are blocking Startup process. If so, they throw
ERROR/FATAL as for other conflict resolutions. Deadlock stop gap
removed. max_standby_delay = -1 option removed to prevent deadlock.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
the checkpoint in immediate or lazy mode. This is to address complaints
that pg_start_backup() takes a long time even when there's no need to minimize
its I/O consumption.
restore_command should report failure on non-existent .backup and .history
files. Tidy up some related text along the way.
Patch by Markus Bertheau, with some editing by Simon Riggs and myself.
recovery stop time was used. This avoids a corner-case risk of trying to
overwrite an existing archived copy of the last WAL segment, and seems
simpler and cleaner all around than the original definition. Per example
from Jon Colverson and subsequent analysis by Simon.
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
Standard English uses "may", "can", and "might" in different ways:
may - permission, "You may borrow my rake."
can - ability, "I can lift that log."
might - possibility, "It might rain today."
Unfortunately, in conversational English, their use is often mixed, as
in, "You may use this variable to do X", when in fact, "can" is a better
choice. Similarly, "It may crash" is better stated, "It might crash".
Also update two error messages mentioned in the documenation to match.
command strings inserts relative not absolute path of file to process.
This is a side-effect of 2005-07-04 change that makes the server use
relative paths in general. Noted by Bernd Helmle.
an SQL dump if an error occurs. Along the way, make some improvements and
copy-edits to the surrounding text. Patch from Simon Riggs, additional
fixes by Neil Conway.
than N seconds apart. This allows a simple, if not very high performance,
means of guaranteeing that a PITR archive is no more than N seconds behind
real time. Also make pg_current_xlog_location return the WAL Write pointer,
add pg_current_xlog_insert_location to return the Insert pointer, and fix
pg_xlogfile_name_offset to return its results as a two-element record instead
of a smashed-together string, as per recent discussion.
Simon Riggs
to happen automatically during pg_stop_backup(). Add some functions for
interrogating the current xlog insertion point and for easily extracting
WAL filenames from the hex WAL locations displayed by pg_stop_backup
and friends. Simon Riggs with some editorialization by Tom Lane.
compatibility for release 7.2 and earlier. I have not altered any
mentions of release 7.3 or later. The release notes were not modified,
so the changes are still documented, just not in the main docs.
WAL and the interaction of the new full_page_writes parameter with PITR.
The too-small WAL first sect1 has been merged with the one following
sect1 for clarity.
Some minor comments have been made in the WAL config section also.
Passes SGML make and proofread for typos.
Files changed:
patching file doc/src/sgml/backup.sgml
patching file doc/src/sgml/config.sgml
patching file doc/src/sgml/wal.sgml
Simon Riggs
should fix the recent reports of "index is not a btree" failures,
as well as preventing a more obscure race condition involving changes
to a template database just after copying it with CREATE DATABASE.
using the recently added lo_create() function. The restore logic in
pg_restore is greatly simplified as well, since there's no need anymore
to try to adjust database references to match a new set of blob OIDs.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.