This is a patch to fix crashes in psql when executing queries from
an external file. The code also adds error checking to verify that
memory for "query" was allocated. The conditional for the block of
code was changed from "query == NULL" to "query_alloced == false".
The conditional, "query == NULL", was never true. This prevented
the memory being allocated for "query". A few lines later, an attempt
to write to an un-allocated memory area generated a SIGSEGV causing
the frontend to crash.
Subject: [PATCHES] sequences display in psql
Well, I am away at Progress training (not Postgres!!) and desided to do
this patch during a break. This will allow listing of sequences in
addition to listing of tables and indicies:
\d would should indicies, tables, and sequences
\ds would show sequences only.
Subject: [PATCHES] psql and large objects fix
Psql was broken by using "Inv[0-9]+" instead of "xin[xv][0-9]+" to not
show large object files. Been this way for a long time too. Relic of
an older naming convention, perhaps?
Subject: [PATCHES] More psql and libpq patches
Well..these would be the last patches until the release (I hope)...
I ran the regression tests while watching psql under purify, and it did
not leak even one byte.
In this patch:
* Plugged a major leak when PSQL reads files for input (either through
\i options or through -f option)
* Fixed the one remaining leak in PSQL in not clearing PGresult *results
everywhere it is supposed to. (Thanks Tymm)
* Fixed A small leak in PSQL not clearing all the PGsettings correctly.
* A not-so-obvious (but small) leak in Libpq when PQsetdb fails for any
reason.
* Added \n to some Libpq error messages to make them easier to digest..
* Finally, added /* PURIFY */ comment to some of the code indicating
the reason for why it was added/changed...for future developers.
psql.c: In function `HandleSlashCmds':
psql.c:1141: warning: `optarg3' might be used uninitialized in this function
psql.c:1157: warning: `optarg3' might be used uninitialized in this function
-> char *optarg3 = NULL;
Subject: [PATCHES] patch for a memory leak
Well...I screwed up and posted the wrong patch for psql originally..
The patch for that patch wposted below will fix it..
Subject: [PATCHES] psql - \dt,\di commands.
I sent this a couple of months ago in re a request by Maxim
Kozin, but I had the patch reversed, creating some confusion
over applying it.
Here's a more complete version.
Adds \dt to list only tables/views and \di to list only
indicies. \d will still work as before.
Subject: [PATCHES] memory leak patches in libpq and psql
A couple of small memory leak patches (detected with Purify) primarily
in libpq.
* Fixed (NULL) border problem in psql (run psql, do \m, then select
something from a table...row separators will be nulls)
* Fixed memory leak with the abovementioned border not being freed
properly.
* Fixed memory leak in freePGconn() not freeing conn->port
* Fixed up PQclear() to free parts of PGresult only if these
parts are not null.
* Fixed a decent memory leak that occured after executing every command
in psql. PGresult *results was not freed most of the time.
There is still a leak being detected (2 bytes) in readline functions, but
I think this is old readline library. I will install new one and test it.
FreeBSD
The Makefile(s) have all been cleaned up such that there is a single
LDFLAGS vs LD_ADD or LDADD or LDFLAGS or LDFLAGS_BE. The Makefile(s)
should be alot more straightforward then they were before...and
consistent
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
Add a check to configure for strdup
Remove all the '-ltermcap' checks from psql/Makefile
Have {psql,pg_dump}/Makefile modified if strdup doesn't exist on the system
be #ifdef'd into psql.c itself
From what I can tell, if USE_READLINE is true or false, psql works under
FreeBSD, without configure. Now to test it *again* under sparc_solaris
with configure and see if it works...
history.h doesn't...previously, it was assumed that both existed, or
didn't exist...but this assumption fails on the one sparc_solaris box
that I have access to, and could exist in other circumstances
Here is a trivial patch to get back the 1.09 behavior; it just removes trailing
newlines before printing the line out with a newline rather than after...
Thomas Lockhart
gmake of the code without interruption.
There's also some tidy-up of the MAXPATHLEN stuff based on the assumption that
all supported platforms have MAXPATHLEN defined in <sys/param.h>.
(The only unknowns for the above are AIX and IRIX5.)
It adds a WITH OIDS option to the copy command, which allows
dumping and loading of oids.
If a copy command tried to load in an oid that is greater than
its current system max oid, the system max oid is incremented. No
checking is done to see if other backends are running and have cached
oids.
pg_dump as its first step when using the -o (oid) option, will
copy in a dummy row to set the system max oid value so as rows are
loaded in, they are certain to be lower than the system oid.
pg_dump now creates indexes at the end to speed loading
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
pg_dump and load to 2.0. I haven't gotten any feedback on whether
people want it, so I am submitting it for others to decide. I would
recommend an install in 1.02.1.
I had said that the 2.0 pg_dump could dump a 1.02.1 database, but I was
wrong. The copy is actually performed by the backend, and the 2.0
database will not be able to read 1.02.1 databases because of the new
system columns.
This patch does several things. It copies nulls out as \N, so they can
be distinguished from '' strings. It fixes a problem where backslashes
in the input stream were not output as double-backslashes. Without this
patch, backslashes copied out were deleted upon input, or interpreted as
special characters. Third, input is now terminated by backslash-period.
This can not be part of a normal input stream.
I tested this by creating a database with all sorts of nulls, backslash,
and period fields and dumped the database and reloaded into a new
database and compared them.
Submitted by: Bruce
|We're all too familiar with psql's "no response from backend" message.
|Users can't tell what this means, and psql continues prompting for
|commands after it even though the backend is dead and no commands can
|succeed. It eventually dies on a signal when the dead socket fills
|up. I extended the message to offer a better explanation and made
|psql exit when it finds the backend is dead.
|
|I also added a short message and newline when the user does a ctl-D so
|it doesn't mess up the terminal display.
|
|
Submitted by: Bryan Henderson <bryanh@giraffe.netgate.net>
updates the psql.1 manual page for \ options
add row count and ties it to the header option
updated manual pages and comment for above change
got \? to display in one screen-full (almost, \? scrolls off top)
moved \r to \E, and \z to \r (for historical reasons with monitor)
small code alignment cleanup
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
of my (proff) patch. This is the rest of it, with a few, mainly aesthetic
changes. I've removed a lot of redundency from the original code,
added support for the new PQprint() routines in libpq, expanded tables,
and a few generally nifty ways of massaging data in and out of the
backend. Still needs some good stress testing.
>
> We did some testing and found that if we name the table 'Inv' with
> anything appended to it, the table does not appear in the '\d' table list.
> It appears to be the capital I as a table named 'invItemsL' is created
> and displayed properly.
>
- submitted by: Jason Wright <jason@shiloh.vnet.net>
before (plus some optimisations/bug fixes et al). I've included a small
demo transcript below. Note that all of of the display
functionality/intelligence you see here, can be had merely by calling
the new LIBPQ PQprint() routine with the appropriate arguments/options,
including the HTML3 output guff.
submitted by: Julian Assange <proff@suburbia.net>
Marc G. Fournier
Bruce Momjian
Thomas G. Lockhart
Vadim B. Mikheev
Bryan Henderson
Julian Assange