Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
field into WAL record and reset it from there, rather than using
FrozenTransactionId which can lead to some corner case bugs.
Problem report and suggested route to a fix from Heikki, details by me.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
since these seem to happen after all in corrupted indexes. Make sure we
supply the index name in all cases, and provide relevant block numbers where
available. Also consistently identify the index name as such.
Back-patch to 8.2, in hopes that this might help Mason Hale figure out his
problem.
than two independent bits (one of which was never used in heap pages anyway,
or at least hadn't been in a very long time). This gives us flexibility to
add the HOT notions of redirected and dead item pointers without requiring
anything so klugy as magic values of lp_off and lp_len. The state values
are chosen so that for the states currently in use (pre-HOT) there is no
change in the physical representation.
deletion code to avoid the case where an upper-level btree page remains "half
dead" for a significant period of time, and to block insertions into a key
range that is in process of being re-assigned to the right sibling of the
deleted page's parent. This prevents the scenario reported by Ed L. wherein
index keys could become out-of-order in the grandparent index level.
Since this is a moderately invasive fix, I'm applying it only to HEAD.
The bug exists back to 7.4, but the back branches will get a different patch.
When we are about to split an index page to do an insertion, first look
to see if any entries marked LP_DELETE exist on the page, and if so remove
them to try to make enough space for the desired insert. This should reduce
index bloat in heavily-updated tables, although of course you still need
VACUUM eventually to clean up the heap.
Junji Teramoto
into a single mostly-physical-order scan of the index. This requires some
ticklish interlocking considerations, but should create no material
performance impact on normal index operations (at least given the
already-committed changes to make scans work a page at a time). VACUUM
itself should get significantly faster in any index that's degenerated to a
very nonlinear page order. Also, we save one pass over the index entirely,
except in the case where there were no deletions to do and so only one pass
happened anyway.
Original patch by Heikki Linnakangas, rework by Tom Lane.
thereby saving a visit to the metapage in most index searches/updates.
This wouldn't actually save any I/O (since in the old regime the metapage
generally stayed in cache anyway), but it does provide a useful decrease
in bufmgr traffic in high-contention scenarios. Per my recent proposal.
incrementally by successive inserts rather than by sorting the data.
We were only using the slow path during bootstrap, apparently because
when first written it failed during bootstrap --- but it works fine now
AFAICT. Removing it saves a hundred or so lines of code and produces
noticeably (~10%) smaller initial states of the system catalog indexes.
While that won't make much difference for heavily-modified catalogs,
for the more static ones there may be a useful long-term performance
improvement.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
just refer to btree index entries as plain IndexTuples, which is what
they have been for a very long time. This is mostly just an exercise
in removing extraneous notation, but it does save a palloc/pfree cycle
per index insertion.
are two basically different kinds of scankeys, and we ought to try harder
to indicate which is used in each place in the code. I've chosen the names
"search scankey" and "insertion scankey", though you could make about
as good an argument for "operator scankey" and "comparison function
scankey".
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
on every index page they read; in particular to catch the case of an
all-zero page, which PageHeaderIsValid allows to pass. It turns out
hash already had this idea, but it was just Assert()ing things rather
than doing a straight error check, and the Asserts were partially
redundant with PageHeaderIsValid anyway. Per recent failure example
from Jim Nasby. (gist still needs the same treatment.)
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
Essentially, we shoehorn in a lockable-object-type field by taking
a byte away from the lockmethodid, which can surely fit in one byte
instead of two. This allows less artificial definitions of all the
other fields of LOCKTAG; we can get rid of the special pg_xactlock
pseudo-relation, and also support locks on individual tuples and
general database objects (including shared objects). None of those
possibilities are actually exploited just yet, however.
I removed pg_xactlock from pg_class, but did not force initdb for
that change. At this point, relkind 's' (SPECIAL) is unused and
could be removed entirely.
PageIndexTupleDelete() with a single pass of compactification ---
logic mostly lifted from PageRepairFragmentation. I noticed while
profiling that a VACUUM that's cleaning up a whole lot of deleted
tuples would spend as much as a third of its CPU time in
PageIndexTupleDelete; not too surprising considering the loop method
was roughly O(N^2) in the number of tuples involved.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
Bruce Momjian
Heikki Linnakangas
Robert Haas
Magnus Hagander
Tom Lane
Simon Riggs
Alvaro Herrera
PostgreSQL Daemon