Use palloc0() instead of palloc() to create a new JsonbIterator.
Otherwise, the isScalar field is sometimes not initialized. There is
probably no impact in practice, but it's cleaner this way and it avoids
future problems.
Commit 3a7cc727c was a little over eager about adding an explicit return
to this function, whose value is checked in most call sites. This change
reverses that and returns the expected value explicitly. It also adds a
check to the one call site lacking one.
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
To distinguish SQL statements that are INSERT/UPDATE/DELETE from other
ones, exec_stmt_execsql looked at the post-rewrite form of the statement
rather than the original. This is problematic because it did that only
during first execution of the statement (in a session), but the correct
answer could change later due to addition or removal of DO INSTEAD rules
during the session. That could lead to an Assert failure, as reported
by Tushar Ahuja and Robert Haas. In non-assert builds, there's a hazard
that we would fail to enforce STRICT behavior when we'd be expected to.
That would happen if an initially present DO INSTEAD, that replaced the
original statement with one of a different type, were removed; after that
the statement should act "normally", including strictness enforcement, but
it didn't. (The converse case of enforcing strictness when we shouldn't
doesn't seem to be a hazard, as addition of a DO INSTEAD that changes the
statement type would always lead to acting as though the statement returned
zero rows, so that the strictness error could not fire.)
To fix, inspect the original form of the statement not the post-rewrite
form, making it valid to assume the answer can't change intra-session.
This should lead to the same answer in every case except when there is a
DO INSTEAD that changes the statement type; we will now set mod_stmt=true
anyway, while we would not have done so before. That breaks the Assert
in the SPI_OK_REWRITTEN code path, which expected the latter behavior.
It might be all right to assert mod_stmt rather than !mod_stmt there,
but I'm not entirely convinced that that'd always hold, so just remove
the assertion altogether.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/CA+TgmoZUrRN4xvZe_BbBn_Xp0BDwuMEue-0OyF0fJpfvU2Yc7Q@mail.gmail.com
Print columns as "column C of <relation>" rather than "<relation> column
C". This seems to read noticeably better in English, as evidenced by the
regression test output changes, and the code change also makes it possible
for translators to adjust the phrase order in other languages.
Also change the output for OCLASS_DEFAULT from "default for %s" to
"default value for %s". This seems to read better and is also more
consistent with the output of, for instance, getObjectTypeDescription().
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Refactor some cases in getObjectDescription so that the translator has
more control over phrase order in the translated messages. This doesn't
cause any changes in the English results. (I was sorely tempted to
reorder "... belonging to role %s in schema %s" into "... in schema %s
belonging to role %s", but refrained.)
In principle we could back-patch this, but since translators have not
complained about these cases previously, it seems better not to thrash
the translatable strings in back branches.
Kyotaro Horiguchi, tweaked a bit by me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
getObjectDescription and getObjectIdentity failed to schema-qualify
the name of the published table, which is bad in getObjectDescription and
unforgivable in getObjectIdentity. Actually, getObjectIdentity failed to
emit the table's name at all unless "objname" output is requested, which
accidentally works for some (all?) extant callers but is clearly not the
intended API. Somebody had also not gotten the memo that the output of
getObjectIdentity is not to be translated.
To fix getObjectDescription, I made it call getRelationDescription, which
required refactoring the translatable string for the case, but is more
future-proof in case we ever publish relations that aren't plain tables.
While at it, I made the English output look like "publication of table X
in publication Y"; the added "of" seems to me to make it read much better.
Back-patch to v10 where publications were introduced.
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Collations, conversions, extended statistics objects (in >= v10),
and all four types of text search objects have schema-qualified names.
getObjectDescription() ignored that and would emit just the base name of
the object, potentially producing wrong or at least highly misleading
output. Fix it to add the schema name whenever the object is not "visible"
in the current search path, as is the rule for other schema-qualifiable
object types.
Although in common situations the output won't change, this seems to me
(tgl) to be a bug worthy of back-patching, hence do so.
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Now that the Working with git wiki page no longer suggests producing
context diffs, we should preserve the information on how to use
git-external-diff for those people who want to view context format
diffs. The most obvious place is in the script itself, so that's what's
done here.
If echo = false, simple_prompt() is supposed to prevent echoing the
input (for password input). However, the Windows implementation applied
the mode change to STD_INPUT_HANDLE. That would not have the desired
effect if stdin isn't actually the terminal, for instance if the user
is piping something into psql. Fix it to apply the mode change to
the correct input file, so that passwords do not echo in such cases.
In passing, shorten and de-uglify this code by using #elif rather than
an #if nest and removing some duplicated code.
Back-patch to all supported versions. To simplify that, also back-patch
the portions of commit 9daec77e1 that got rid of an unnecessary
malloc/free in the same area.
Matthew Stickney (cosmetic changes by me)
Discussion: https://postgr.es/m/502a1fff-862b-da52-1031-f68df6ed5a2d@gmail.com
We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
Commit c37b3d08c dropped its added GetDataDirectoryCreatePerm call into
the wrong place in pg_resetwal.c, namely after the chdir to DataDir.
That broke invocations using a relative path, as reported by Tushar Ahuja.
We could have left it where it was and changed the argument to be ".",
but that'd result in a rather confusing error message in event of a
failure, so re-ordering seems like a better solution.
Similarly reorder operations in pg_rewind.c. The issue there is that
it doesn't seem like a good idea to do any actual operations before the
not-root check (on Unix) or the restricted token acquisition (on Windows).
I don't know that this is an actual bug, but I'm definitely not convinced
that it isn't, either.
Assorted other code review for c37b3d08c and da9b580d8: fix some
misspelled or otherwise badly worded comments, put the #include for
<sys/stat.h> where it actually belongs, etc.
Discussion: https://postgr.es/m/aeb9c3a7-3c3f-a57f-1a18-c8d4fcdc2a1f@enterprisedb.com
Commit 6e7baa3227 added support for "B" unit, for specifying config options
in bytes. However, it was only accepted in GUC_UNIT_BYTE settings,
wal_segment_size and track_activity_query_size, and not e.g. in work_mem.
This patch makes it consistent, so that "B" accepted in all the same
contexts where "kB", "MB", and so forth are accepted.
Add "B" to the list of accepted units in the error hint, along with "kB",
"MB", etc.
Add an entry in the conversion table for "TB" to "B" conversion. A terabyte
is out of range for any GUC_UNIT_BYTE option, so you always get an "out of
range" error with that, but without it, you get a confusing error message
that claims that "TB" is not an accepted unit, with a hint that nevertheless
lists "TB" as an accepted unit.
Reviewed-by: Alexander Korotkov, Andres Freund
Discussion: https://www.postgresql.org/message-id/1bfe7f4a-7e22-aa6e-7b37-f4d222ed2d67@iki.fi
Because the code for the HEADER option skips a line when this counter
is zero, a very long COPY FROM WITH HEADER operation would drop a line
every 2^32 lines. A lesser but still unfortunate problem is that errors
would show a wrong input line number for errors occurring beyond the
2^31'st input line. While such large input streams seemed impractical
when this code was first written, they're not any more. Widening the
counter (and some associated variables) to uint64 should be enough to
prevent problems for the foreseeable future.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f88yh-6wwEfO6QLEEvH3BEugOq2QX1TOja0vCauoynmOQ@mail.gmail.com
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
This is the converse of the unsafe-usage-of-%m problem: the reason
ereport/elog provide that format code is mainly to dodge the hazard
of errno getting changed before control reaches functions within the
arguments of the macro. I only found one instance of this hazard,
but it's been there since 9.4 :-(.
While glibc's version of printf accepts %m, most others do not;
to be portable, we have to do it the hard way with strerror(errno).
pg_verify_checksums evidently did not get that memo.
Noted while fooling around with NetBSD-current, which generates
a compiler warning for this mistake.
The "l" (ell) width spec means something in the corresponding scanf usage,
but not here. While modern POSIX says that applying "l" to "f" and other
floating format specs is a no-op, SUSv2 says it's undefined. Buildfarm
experience says that some old compilers emit warnings about it, and at
least one old stdio implementation (mingw's "ANSI" option) actually
produces wrong answers and/or crashes.
Discussion: https://postgr.es/m/21670.1526769114@sss.pgh.pa.us
Discussion: https://postgr.es/m/c085e1da-0d64-1c15-242d-c921f32e0d5c@dunslane.net
FindDefinedSymbol was intended to take an array of possible include
paths, but it never actually worked correctly for any but the first
array element. Since there's no use-case for more than one path
anyway, let's just simplify this code and its callers by redefining
it as taking only one include path.
Minor other code-beautification without functional effects, except
that in one place we format the output as pgindent would do.
John Naylor
Discussion: https://postgr.es/m/CAJVSVGXM_n32hTTkircW4_K1LQFsJNb6xjs0pAP4QC0ZpyJfPQ@mail.gmail.com
Ancient HPUX, for one, does this. We hadn't noticed due to the lack
of regression tests that required a working strtoll.
(I was slightly tempted to remove the other historical spelling,
strto[u]q, since it seems we have no buildfarm members testing that case.
But I refrained.)
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Buildfarm member dromedary is still unhappy about the recently-added
ecpg "long long" tests. The reason turns out to be that it includes
"-ansi" in its CFLAGS, and in their infinite wisdom Apple have decided
to hide the declarations of strtoll/strtoull in C89-compliant builds.
(I find it pretty curious that they hide those function declarations
when you can nonetheless declare a "long long" variable, but anyway
that is their behavior, both on dromedary's obsolete macOS version and
the newest and shiniest.) As a result, gcc assumes these functions
return "int", leading naturally to wrong results.
(Looking at dromedary's past build results, it's evident that this
problem also breaks pg_strtouint64() on 32-bit platforms; but we
evidently have no regression tests that exercise that function with
values above 32 bits.)
To fix, supply declarations for these functions when the platform
provides the functions but not the declarations, using the same type
of mechanism as we use for some other similar cases.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This will only actually exercise the "long long" code paths on platforms
where "long" is 32 bits --- otherwise, the SQL bigint type maps to
plain "long", and we will test that code path instead. But that's
probably sufficient coverage, and anyway we weren't testing either
code path before.
Dang Minh Huong, tweaked a bit by me
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
This is needed for full support of "long long" variables in ecpg, but
the previous patch for bug #15080 (commits 51057feaa et al) missed it.
In MSVC versions where the functions don't exist under those names,
we can nonetheless use _strtoi64() and _strtoui64().
Like the previous patch, back-patch all the way.
Dang Minh Huong
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
Use DISCARD PLANS instead of a reconnect to force reconstruction of
a cached plan; this corresponds more nearly to what people might
actually do in practice.
Commit bad51a49a tried to use a shortcut with just one stamp file
recording the actions of generating the pg_*_d.h headers and copying
them to the src/include/catalog/ directory. That doesn't work in all
scenarios though, so we must use two stamp files like the Makefiles do.
John Naylor
Discussion: https://postgr.es/m/CANFyU944GdHr=puPbA78STnqr=8kgMrGF-VDHck6aO_-qNDALg@mail.gmail.com
In commit 6bdf1303b, we ensured that power()/^ for float8 would honor
the NaN behaviors specified by POSIX standards released in this century,
ie NaN ^ 0 = 1 and 1 ^ NaN = 1. However, numeric_power() was not
touched and continued to follow the once-common behavior that every
case involving NaN input produces NaN. For consistency, let's switch
the numeric behavior to the modern spec in the same release that ensures
that behavior for float8.
(Note that while 6bdf1303b was initially back-patched, we later undid
that, concluding that any behavioral change should appear only in v11.)
Discussion: https://postgr.es/m/10898.1526421338@sss.pgh.pa.us
Up to now, it's been safe for plpgsql to store TOAST pointers in its
variables because the ActiveSnapshot for whatever query called the plpgsql
function will surely protect such TOAST values from being vacuumed away,
even if the owning table rows are committed dead. With the introduction of
procedures, that assumption is no longer good in "non atomic" executions
of plpgsql code. We adopt the slightly brute-force solution of detoasting
all TOAST pointers at the time they are stored into variables, if we're in
a non-atomic context, just in case the owning row goes away.
Some care is needed to avoid long-term memory leaks, since plpgsql tends
to run with CurrentMemoryContext pointing to its call-lifespan context,
but we shouldn't assume that no memory is leaked by heap_tuple_fetch_attr.
In plpgsql proper, we can do the detoasting work in the "eval_mcontext".
Most of the code thrashing here is due to the need to add this capability
to expandedrecord.c as well as plpgsql proper. In expandedrecord.c,
we can't assume that the caller's context is short-lived, so make use of
the short-term sub-context that was already invented for checking domain
constraints. In view of this repurposing, it seems good to rename that
variable and associated code from "domain_check_cxt" to "short_term_cxt".
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/5AC06865.9050005@anastigmatix.net
canonicalize_ec_expression() is supposed to agree with coerce_type() as to
whether a RelabelType should be inserted to make a subexpression be valid
input for the operators of a given opclass. However, it did the wrong
thing with named-composite-type inputs to record_eq(): it put in a
RelabelType to RECORDOID, which the parser doesn't. In some cases this was
harmless because all code paths involving a particular equivalence class
did the same thing, but in other cases this would result in failing to
recognize a composite-type expression as being a member of an equivalence
class that it actually is a member of. The most obvious bad effect was to
fail to recognize that an index on a composite column could provide the
sort order needed for a mergejoin on that column, as reported by Teodor
Sigaev. I think there might be other, subtler, cases that result in
misoptimization. It also seems possible that an unwanted RelabelType
would sometimes get into an emitted plan --- but because record_eq and
friends don't examine the declared type of their input expressions, that
would not create any visible problems.
To fix, just treat RECORDOID as if it were a polymorphic type, which in
some sense it is. We might want to consider formalizing that a bit more
someday, but for the moment this seems to be the only place where an
IsPolymorphicType() test ought to include RECORDOID as well.
This has been broken for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/a6b22369-e3bf-4d49-f59d-0c41d3551e81@sigaev.ru
Previously, we passed the toplevel PlannerInfo, but we actually want
to pass the relevant subroot. One problem with passing the toplevel
PlannerInfo is that the FDW which wants to push down an UPDATE or
DELETE against a join won't find the relevant joinrel there.
As of commit 1bc0100d27, postgres_fdw
tries to do exactly this and can be made to fail an assertion as a
result.
It's possible that this should be regarded as a bug fix and
back-patched to earlier releases, but for lack of a test case that
fails in earlier releases, no back-patch for now.
Etsuro Fujita, reviewed by Amit Langote.
Discussion: http://postgr.es/m/5AF43E02.30000@lab.ntt.co.jp
The impact of VARIADIC on the combine/serialize/deserialize support
functions of an aggregate wasn't thought through carefully. There is
actually no impact, because variadicity isn't passed through to these
functions (and it doesn't seem like it would need to be). However,
lookup_agg_function was mistakenly told to check things as though it were
passed through. The net result was that it was impossible to declare an
aggregate that had both VARIADIC input and parallelism support functions.
In passing, fix a runtime check in nodeAgg.c for the combine function's
strictness to make its error message agree with the creation-time check.
The previous message was actually backwards, and it doesn't seem like
there's a good reason to have two versions of this message text anyway.
Back-patch to 9.6 where parallel aggregation was introduced.
Alexey Bashtanov; message fix by me
Discussion: https://postgr.es/m/f86dde87-fef4-71eb-0480-62754aaca01b@imap.cc
Creating indexes on foreign tables is already forbidden, but local
partitioned indexes (commit 8b08f7d482) forgot to check for them. Add
a preliminary check to prevent wasting time.
Another school of thought says to allow the index to be created if it's
not a unique index; but it's possible to do better in the future (enable
indexing of foreign tables, somehow), so we avoid painting ourselves in
a corner by rejecting all cases, to avoid future grief (a.k.a. backward
incompatible changes).
Reported-by: Arseny Sher
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/87sh71cakz.fsf@ars-thinkpad
Peter Eisentraut
Andrew Dunstan
Tom Lane
Heikki Linnakangas
Andrew Gierth
Stephen Frost
Robert Haas
Magnus Hagander
Alvaro Herrera