Don't write to stdin of a psql process that could have already exited
with an authentication failure. Buildfarm members crake and mandrill
have failed once by doing so. Ignore SIGPIPE in all TAP tests.
Back-patch to v10, where these tests were introduced.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20171209210203.GC3362632@rfd.leadboat.com
Fix a couple of minor oversights in commit 632b03da3: the tests
should be run in database "pl_regression" like the other PLs do,
and we should clean up the tests' output cruft during "make clean".
The previous commit has shown that the sanity checks around freezing
aren't strong enough. Strengthening them seems especially important
because the existance of the bug has caused corruption that we don't
want to make even worse during future vacuum cycles.
The errors are emitted with ereport rather than elog, despite being
"should never happen" messages, so a proper error code is emitted. To
avoid superflous translations, mark messages as internal.
Author: Andres Freund and Alvaro Herrera
Reviewed-By: Alvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
Backpatch: 9.3-
Previously it was possible that a tuple was not pruned during vacuum,
even though its update xmax (i.e. the updating xid in a multixact with
both key share lockers and an updater) was below the cutoff horizon.
As the freezing code assumed, rightly so, that that's not supposed to
happen, xmax would be preserved (as a member of a new multixact or
xmax directly). That causes two problems: For one the tuple is below
the xmin horizon, which can cause problems if the clog is truncated or
once there's an xid wraparound. The bigger problem is that that will
break HOT chains, which in turn can lead two to breakages: First,
failing index lookups, which in turn can e.g lead to constraints being
violated. Second, future hot prunes / vacuums can end up making
invisible tuples visible again. There's other harmful scenarios.
Fix the problem by recognizing that tuples can be DEAD instead of
RECENTLY_DEAD, even if the multixactid has alive members, if the
update_xid is below the xmin horizon. That's safe because newer
versions of the tuple will contain the locking xids.
A followup commit will harden the code somewhat against future similar
bugs and already corrupted data.
Author: Andres Freund, with changes by Alvaro Herrera
Reported-By: Daniel Wood
Analyzed-By: Andres Freund, Alvaro Herrera, Robert Haas, Peter
Geoghegan, Daniel Wood, Yi Wen Wong, Michael Paquier
Reviewed-By: Alvaro Herrera, Robert Haas, Michael Paquier
Discussion:
https://postgr.es/m/E5711E62-8FDF-4DCA-A888-C200BF6B5742@amazon.comhttps://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
Backpatch: 9.3-
The logical slots have a fast code path for sending data so as not to
impose too high a per message overhead. The fast path skips checks for
interrupts and timeouts. However, the existing coding failed to consider
the fact that a transaction with a large number of changes may take a
very long time to be processed and sent to the client. This causes the
walsender to ignore interrupts for potentially a long time and more
importantly it will result in the walsender being killed due to
timeout at the end of such a transaction.
This commit changes the fast path to also check for interrupts and only
allows calling the fast path when the last keepalive check happened less
than half the walsender timeout ago. Otherwise the slower code path will
be taken.
Backpatched to 9.4
Petr Jelinek, reviewed by Kyotaro HORIGUCHI, Yura Sokolov, Craig
Ringer and Robert Haas.
Discussion: https://postgr.es/m/e082a56a-fd95-a250-3bae-0fff93832510@2ndquadrant.com
In order for executor nodes to be able to change their ExecProcNode function
after ExecInitNode() has finished, provide ExecSetExecProcNode(). This allows
any wrappers functions that only execProcnode.c knows about to be reinstalled.
The motivation for wanting to change ExecProcNode after ExecInitNode() has
finished is that it is not known until later whether parallel query is
available, so if a parallel variant is to be installed then ExecInitNode()
is too soon to decide.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=09rr65VN+cAV5FgyM_z=D77Xy8Fuc9CDDDYbq3pQUezg@mail.gmail.com
Sometimes it is useful to be able to insist that the compiler inline a
function that its normal cost analysis would not normally choose to inline.
This can be useful for instantiating different variants of a function that
remove branches of code by constant folding.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=09rr65VN+cAV5FgyM_z=D77Xy8Fuc9CDDDYbq3pQUezg@mail.gmail.com
Crash restarts currently don't clean up temporary files, as a debugging aid.
If a left-over file happens to have the same name as a segment file we're
trying to create, we'll just truncate and reuse it, but there is a problem:
BufFileOpenShared() determines how many segment files exist by trying to open
.0, .1, .2, ... until it finds no more files. It might be confused by a junk
file that has the next segment number. To defend against that, make sure we
always create a gap after the end file by unlinking the following name if it
exists. Also make it an error to try to open a BufFile that doesn't exist
(has no segment 0), so as not to encourage the development of client code
that depends on an interface that we can't reliably provide.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D2jhCbC_GFQJaaDhWxLB4EXtT3vVd5czuRNaqF5CWSTog%40mail.gmail.com
This patch makes a number of interrelated changes to reduce the overhead
involved in creating/deleting memory contexts. The key ideas are:
* Include the AllocSetContext header of an aset.c context in its first
malloc request, rather than allocating it separately in TopMemoryContext.
This means that we now always create an initial or "keeper" block in an
aset, even if it never receives any allocation requests.
* Create freelists in which we can save and recycle recently-destroyed
asets (this idea is due to Robert Haas).
* In the common case where the name of a context is a constant string,
just store a pointer to it in the context header, rather than copying
the string.
The first change eliminates a palloc/pfree cycle per context, and
also avoids bloat in TopMemoryContext, at the price that creating
a context now involves a malloc/free cycle even if the context never
receives any allocations. That would be a loser for some common
usage patterns, but recycling short-lived contexts via the freelist
eliminates that pain.
Avoiding copying constant strings not only saves strlen() and strcpy()
overhead, but is an essential part of the freelist optimization because
it makes the context header size constant. Currently we make no
attempt to use the freelist for contexts with non-constant names.
(Perhaps someday we'll need to think harder about that, but in current
usage, most contexts with custom names are long-lived anyway.)
The freelist management in this initial commit is pretty simplistic,
and we might want to refine it later --- but in common workloads that
will never matter because the freelists will never get full anyway.
To create a context with a non-constant name, one is now required to
call AllocSetContextCreateExtended and specify the MEMCONTEXT_COPY_NAME
option. AllocSetContextCreate becomes a wrapper macro, and it includes
a test that will complain about non-string-literal context name
parameters on gcc and similar compilers.
An unfortunate side effect of making AllocSetContextCreate a macro is
that one is now *required* to use the size parameter abstraction macros
(ALLOCSET_DEFAULT_SIZES and friends) with it; the pre-9.6 habit of
writing out individual size parameters no longer works unless you
switch to AllocSetContextCreateExtended.
Internally to the memory-context-related modules, the context creation
APIs are simplified, removing the rather baroque original design whereby
a context-type module called mcxt.c which then called back into the
context-type module. That saved a bit of code duplication, but not much,
and it prevented context-type modules from exercising control over the
allocation of context headers.
In passing, I converted the test-and-elog validation of aset size
parameters into Asserts to save a few more cycles. The original thought
was that callers might compute size parameters on the fly, but in practice
nobody does that, so it's useless to expend cycles on checking those
numbers in production builds.
Also, mark the memory context method-pointer structs "const",
just for cleanliness.
Discussion: https://postgr.es/m/2264.1512870796@sss.pgh.pa.us
The plpgsql.sql test file in the main regression tests is now by far the
largest after numeric_big, making editing and managing the test cases
very cumbersome. The other PLs have their own test suites split up into
smaller files by topic. It would be nice to have that for plpgsql as
well. So, to get that started, set up test infrastructure in
src/pl/plpgsql/src/ and split out the recently added procedure test
cases into a new file there. That file now mirrors the test cases added
to the other PLs, making managing those matching tests a bit easier too.
msvc build system changes with help from Michael Paquier
port.h redirects isnan() to _isnan() on windows, which in turn is
provided by float.h rather than math.h. Therefore include the latter
as well.
Per buildfarm.
After d0aa965c0a, one error path in
PLy_spi_execute_fetch_result() could result in the variable "result"
being dereferenced after being set to NULL. Rearrange the code a bit to
fix that.
Also add another SPI_freetuptable() call so that that is cleared in all
error paths.
discovered by John Naylor <jcnaylor@gmail.com> via scan-build
ideas and review by Tom Lane
A previous commit added inline functions that provide fast(er) and
correct overflow checks for signed integer math. Use them in a
significant portion of backend code. There's more to touch in both
backend and frontend code, but these were the easily identifiable
cases.
The old overflow checks are noticeable in integer heavy workloads.
A secondary benefit is that getting rid of overflow checks that rely
on signed integer overflow wrapping around, will allow us to get rid
of -fwrapv in the future. Which in turn slows down other code.
Author: Andres Freund
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
It's not easy to get signed integer overflow checks correct and
fast. Therefore abstract the necessary infrastructure into a common
header providing addition, subtraction and multiplication for 16, 32,
64 bit signed integers.
The new macros aren't yet used, but a followup commit will convert
several open coded overflow checks.
Author: Andres Freund, with some code stolen from Greg Stark
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
Commit 8b304b8b72 removed replacement
selection, but left behind this comment text. The optimization to
which the comment refers is not relevant without replacement
selection, because if we had so few tuples as to require only one
tape, we would have just completed the sort in memory.
Peter Geoghegan
Discussion: http://postgr.es/m/CAH2-WznqupLA8CMjp+vqzoe0yXu0DYYbQSNZxmgN76tLnAOZ_w@mail.gmail.com
I noticed that _SPI_execute_plan initially sets spierrcontext.arg = NULL,
and only fills it in some time later. If an error were to happen in
between, _SPI_error_callback would try to dereference the null pointer.
This is unlikely --- there's not much between those points except
push-snapshot calls --- but it's clearly not impossible. Tweak the
callback to do nothing if the pointer isn't set yet.
It's been like this for awhile, so back-patch to all supported branches.
The test added by commit 390d58135 turns out to have different output
in CLOBBER_CACHE_ALWAYS builds: there's an extra CONTEXT line in the
error message as a result of detecting the error at a different place.
Possibly we should do something to make that more consistent. But as
a stopgap measure to make the buildfarm green again, adjust the test
to suppress CONTEXT entirely. We can revert this if we do something
in the backend to eliminate the inconsistency.
Discussion: https://postgr.es/m/31545.1512924904@sss.pgh.pa.us
If one exits and re-enters a DECLARE ... BEGIN ... END block within a
single execution of a plpgsql function, perhaps due to a surrounding loop,
the declared variables are supposed to get re-initialized to null (or
whatever their initializer is). But this failed to happen for variables
of type "record", because while exec_stmt_block() expected such variables
to be included in the block's initvarnos list, plpgsql_add_initdatums()
only adds DTYPE_VAR variables to that list. This bug appears to have
been there since the aboriginal addition of plpgsql to our tree.
Fix by teaching plpgsql_add_initdatums() to include DTYPE_REC variables
as well. (We don't need to consider other DTYPEs because they don't
represent separately-stored values.) I failed to resist the temptation
to make some nearby cosmetic adjustments, too.
No back-patch, because there have not been field complaints, and it
seems possible that somewhere out there someone has code depending
on the incorrect behavior. In any case this change would have no
impact on correctly-written code.
Discussion: https://postgr.es/m/22994.1512800671@sss.pgh.pa.us
Notably, this permits linking to the 32-bit Perl binaries advertised on
perl.org, namely Strawberry Perl and ActivePerl. This has a side effect
of permitting linking to binaries built with obsolete MSVC versions.
By default, MSVC 2012 and later require a "safe exception handler table"
in each binary. MinGW-built, 32-bit DLLs lack the relevant exception
handler metadata, so linking to them failed with error LNK2026. Restore
the semantics of MSVC 2010, which omits the table from a given binary if
some linker input lacks metadata. This has no effect on 64-bit builds
or on MSVC 2010 and earlier. Back-patch to 9.3 (all supported
versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
Commits 5a5c2feca3 and
b5178c5d08 introduced support for modern
MSVC-built, 32-bit Perl, but they broke use of MinGW-built, 32-bit Perl
distributions like Strawberry Perl and modern ActivePerl. Perl has no
robust means to report whether it expects a -D_USE_32BIT_TIME_T ABI, so
test this. Back-patch to 9.3 (all supported versions).
The chief alternative was a heuristic of adding -D_USE_32BIT_TIME_T when
$Config{gccversion} is nonempty. That banks on every gcc-built Perl
using the same ABI. gcc could change its default ABI the way MSVC once
did, and one could build Perl with gcc and the non-default ABI.
The GNU make build system could benefit from a similar test, without
which it does not support MSVC-built Perl. For now, just add a comment.
Most users taking the special step of building Perl with MSVC probably
build PostgreSQL with MSVC.
Discussion: https://postgr.es/m/20171130041441.GA3161526@rfd.leadboat.com
Those cases currently crash and supporting them is more work then
originally thought, so we'll just prohibit these scenarios for now.
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reported-by: Мансур Галиев <gomer94@yandex.ru>
Bug: #14866
plpgsql's function exec_move_row() handles assignment of a composite
source value to either a PLpgSQL_rec or PLpgSQL_row target variable.
Oddly, rather than taking a single target argument which it could do
run-time type detection on, it was coded to take two separate arguments
(only one of which is allowed to be non-NULL). This choice had then
back-propagated into storing two separate target variables in various
plpgsql statement nodes, with lots of duplicative coding and awkward
interface logic to support that. Simplify matters by folding those
pairs down to single variables, distinguishing the two cases only
where we must ... which turns out to be only in exec_move_row itself.
This is purely refactoring and should not change any behavior.
In passing, remove unused field PLpgSQL_stmt_open.returntype.
Discussion: https://postgr.es/m/11787.1512713374@sss.pgh.pa.us
A COPY into a table should apply identity sequence values just like it
does for ordinary defaults. This was previously forgotten, leading to
null values being inserted, which in turn would fail because identity
columns have not-null constraints.
Author: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Steven Winfield <steven.winfield@cantabcapital.com>
Bug: #14952
When a worker is flagged as BGW_NEVER_RESTART and we fail to start it,
or if it is not marked BGW_NEVER_RESTART but is terminated before
startup succeeds, what BgwHandleStatus should be reported? The
previous code really hadn't considered this possibility (as indicated
by the comments which ignore it completely) and would typically return
BGWH_NOT_YET_STARTED, but that's not a good answer, because then
there's no way for code using GetBackgroundWorkerPid() to tell the
difference between a worker that has not started but will start
later and a worker that has not started and will never be started.
So, when this case happens, return BGWH_STOPPED instead. Update the
comments to reflect this.
The preceding fix by itself is insufficient to fix the problem,
because the old code also didn't send a notification to the process
identified in bgw_notify_pid when startup failed. That might've
been technically correct under the theory that the status of the
worker was BGWH_NOT_YET_STARTED, because the status would indeed not
change when the worker failed to start, but now that we're more
usefully reporting BGWH_STOPPED, a notification is needed.
Without these fixes, code which starts background workers and then
uses the recommended APIs to wait for those background workers to
start would hang indefinitely if the postmaster failed to fork a
worker.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KDfKkvrjxsKJi3WPyceVi3dH1VCkbTJji2fuwKuB=3uw@mail.gmail.com
I suppose it is a copy-and-paste error that this test doesn't actually
test the "Parallel Append with both partial and non-partial subplans"
case (EXPLAIN alone surely doesn't qualify as a test of executor
behavior). Fix that.
Also, add cosmetic aliases to make it possible to tell apart these
otherwise-identical test cases in log_statement output.
When we create an Append node, we can spread out the workers over the
subplans instead of piling on to each subplan one at a time, which
should typically be a bit more efficient, both because the startup
cost of any plan executed entirely by one worker is paid only once and
also because of reduced contention. We can also construct Append
plans using a mix of partial and non-partial subplans, which may allow
for parallelism in places that otherwise couldn't support it.
Unfortunately, this patch doesn't handle the important case of
parallelizing UNION ALL by running each branch in a separate worker;
the executor infrastructure is added here, but more planner work is
needed.
Amit Khandekar, Robert Haas, Amul Sul, reviewed and tested by
Ashutosh Bapat, Amit Langote, Rafia Sabih, Amit Kapila, and
Rajkumar Raghuwanshi.
Discussion: http://postgr.es/m/CAJ3gD9dy0K_E8r727heqXoBmWZ83HwLFwdcaSSmBQ1+S+vRuUQ@mail.gmail.com
When a Gather or Gather Merge node is started and stopped multiple
times, the old code wouldn't reset the shared state between executions,
potentially resulting in dramatically inflated instrumentation data
for nodes beneath it. (The per-worker instrumentation ended up OK,
I think, but the overall totals were inflated.)
Report by hubert depesz lubaczewski. Analysis and fix by Amit Kapila,
reviewed and tweaked a bit by me.
Discussion: http://postgr.es/m/20171127175631.GA405@depesz.com
If a hash join appears in a parallel query, there may be no hash table
available for explain.c to inspect even though a hash table may have
been built in other processes. This could happen either because
parallel_leader_participation was set to off or because the leader
happened to hit the end of the outer relation immediately (even though
the complete relation is not empty) and decided not to build the hash
table.
Commit bf11e7ee introduced a way for workers to exchange
instrumentation via the DSM segment for Sort nodes even though they
are not parallel-aware. This commit does the same for Hash nodes, so
that explain.c has a way to find instrumentation data from an
arbitrary participant that actually built the hash table.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D3DUQC2-z252N55eOcZBer6DPdM%3DFzrxH9dZc5vYLsjaA%40mail.gmail.com
Previously, this code just reported such problems at LOG level and kept
going. The problem with this approach is that transient failures (e.g.,
ENFILE) could prevent us from resetting unlogged relations to empty,
yet allow recovery to appear to complete successfully. That seems like
a data corruption hazard large enough to treat such problems as reasons
to fail startup.
For the same reason, treat unlink failures for unlogged files as hard
errors not just LOG messages. It's a little odd that we did it like that
when file-level errors in other steps (copy_file, fsync_fname) are ERRORs.
The sole case that I left alone is that ENOENT failure on a tablespace
(not database) directory is not an error, though it will now be logged
rather than just silently ignored. This is to cover the scenario where
a previous DROP TABLESPACE removed the tablespace directory but failed
before removing the pg_tblspc symlink. I'm not sure that that's very
likely in practice, but that seems like the only real excuse for the
old behavior here, so let's allow for it. (As coded, this will also
allow ENOENT on $PGDATA/base/. But since we'll fail soon enough if
that's gone, I don't think we need to complicate this code by
distinguishing that from a true tablespace case.)
Discussion: https://postgr.es/m/21040.1512418508@sss.pgh.pa.us
do_pg_start_backup() expects its callers to pass in an open DIR pointer
for the pg_tblspc directory, but there's no apparent advantage in that.
It complicates the callers without adding any flexibility, and there's no
robustness advantage, since we surely have to be prepared for errors during
the scan of pg_tblspc anyway. In fact, by holding an extra kernel resource
during operations like the preliminary checkpoint, we might be making
things a fraction more failure-prone not less. Hence, remove that argument
and open the directory just for the duration of the actual scan.
Discussion: https://postgr.es/m/28752.1512413887@sss.pgh.pa.us
Modify this function and its subsidiaries so that syscall failures are
reported via ereport(LOG), rather than silently ignored as before.
We don't want to throw a hard ERROR, as that would prevent database
startup, and getting rid of leftover temporary files is not important
enough for that. On the other hand, not reporting trouble at all
seems like an odd choice not in line with current project norms,
especially since any failure here is quite unexpected.
On the same reasoning, adjust these functions' AllocateDir/ReadDir calls
so that failure to scan a directory results in LOG not ERROR. I also
removed the previous practice of silently ignoring ENOENT failures during
directory opens --- there are some corner cases where that could happen
given a previous database crash, but that seems like a bad excuse for
ignoring a condition that isn't expected in most cases. A LOG message
during postmaster start seems OK in such situations, and better than
no output at all.
In passing, make RemovePgTempRelationFiles' test for "is the file name
all digits" look more like the way it's done elsewhere.
Discussion: https://postgr.es/m/19907.1512402254@sss.pgh.pa.us
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
Hopefully, the additional logging will help avoid confusion that
could otherwise result.
Nathan Bossart, reviewed by Michael Paquier, Fabrízio Mello, and me
There's no good reason that the multicolumn stats stuff shouldn't work on
booleans. But it looked only for "Var = pseudoconstant" clauses, and it
will seldom find those for boolean Vars, since earlier phases of planning
will fold "boolvar = true" or "boolvar = false" to just "boolvar" or
"NOT boolvar" respectively. Improve dependencies_clauselist_selectivity()
to recognize such clauses as equivalent to equality restrictions.
This fixes a failure of the extended stats mechanism to apply in a case
reported by Vitaliy Garnashevich. It's not a complete solution to his
problem because the bitmap-scan costing code isn't consulting extended
stats where it should, but that's surely an independent issue.
In passing, improve some comments, get rid of a NumRelids() test that's
redundant with the preceding bms_membership() test, and fix
dependencies_clauselist_selectivity() so that estimatedclauses actually
is a pure output argument as stated by its API contract.
Back-patch to v10 where this code was introduced.
Discussion: https://postgr.es/m/73a4936d-2814-dc08-ed0c-978f76f435b0@gmail.com
Before commit 6b65a7fe62, tqueue.c could
perform tuple remapping and thus leak memory, which is why commit
af33039317 made TupleQueueReaderNext
run in a short-lived context. Now, however, tqueue.c has been reduced
to a shadow of its former self, and there shouldn't be any chance of
leaks any more. Accordingly, remove some tuple copying and memory
context manipulation to speed up processing.
Patch by me, reviewed by Amit Kapila. Some testing by Rafia Sabih.
Discussion: http://postgr.es/m/CAA4eK1LSDydwrNjmYSNkfJ3ZivGSWH9SVswh6QpNzsMdj_oOQA@mail.gmail.com
I'm a little bit astonished that anyone's compiler would have failed to
complain about this. The compiler surely does not know that is_procedure
means the function return value will be ignored.
Without this, when partdesc->nparts == 0, we end up calling
ExecBuildSlotPartitionKeyDescription without initializing values
and isnull.
Reported by Coverity via Michael Paquier. Patch by Michael Paquier,
reviewed and revised by Amit Langote.
Discussion: http://postgr.es/m/CAB7nPqQ3mwkdMoPY-ocgTpPnjd8TKOadMxdTtMLvEzF8480Zfg@mail.gmail.com
We need to check whether the channel-binding flag encoded in the
client-final-message is the same one sent in the client-first-message.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The progress messages print out \r to keep overwriting the same line on
the screen. But this does not yield useful results when writing the
output to a file. So in that case, print out \n instead.
Author: Martín Marqués <martin@2ndquadrant.com>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Put the unique path in the same context as the owning RelOptInfo, rather
than the toplevel planner context. This is how this function worked
originally, but commit f41803bb39
changed it without explanation. mark_dummy_rel adopted the older (or
newer?) technique in commit eca75a12a2,
which also featured a much better explanation of why it is correct.
So, switch back to that technique here, with the same explanation
given there.
Although this fixes a possible memory leak when GEQO is in use, the
leak is minor and probably nobody cares, so no back-patch.
Ashutosh Bapat, reviewed by Tom Lane and by me
Discussion: http://postgr.es/m/CAFjFpRcXkHHrXyD9BCvkgGJV4TnHG2SWJ0PhJfrDu3NAcQvh7g@mail.gmail.com
Invoking the Makefile without an explicit target was building every
possible target instead of just the "all" target. Back-patch to 9.3
(all supported versions).
Previously, this function estimated the selectivity as 1 minus eqjoinsel()
for the negator equality operator, regardless of join type (I think there
was an expectation that eqjoinsel would handle the join type). But
actually this is completely wrong for semijoin cases: the fraction of the
LHS that has a non-matching row is not one minus the fraction of the LHS
that has a matching row. In reality a semijoin with <> will nearly always
succeed: it can only fail when the RHS is empty, or it contains a single
distinct value that is equal to the particular LHS value, or the LHS value
is null. The only one of those things we should have much confidence in
estimating is the fraction of LHS values that are null, so let's just take
the selectivity as 1 minus outer nullfrac.
Per coding convention, antijoin should be estimated the same as semijoin.
Arguably this is a bug fix, but in view of the lack of field complaints
and the risk of destabilizing plans, no back-patch.
Thomas Munro, reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/CAEepm=270ze2hVxWkJw-5eKzc3AB4C9KpH3L2kih75R5pdSogg@mail.gmail.com
Provide support for dynamic or static parties of processes to wait for
all processes to reach point in the code before continuing.
This is similar to the mechanism of the same name in POSIX threads and
MPI, though has explicit phasing and dynamic party support like the
Java core library's Phaser.
This will be used by an upcoming patch adding support for parallel
hash joins.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=2_y7oi01OjA_wLvYcWMc9_d=LaoxrY3eiROCZkB_qakA@mail.gmail.com
Although hash joins are already tested by many queries, these tests
systematically cover the four different states we can reach as part of
the strategy for respecting work_mem.
Author: Thomas Munro
Reviewed-By: Andres Freund
This will be used by pending patches to improve partition pruning.
Amit Langote and Kyotaro Horiguchi, per a suggestion from David
Rowley. Review and testing of the larger patch set of which this is a
part by Ashutosh Bapat, David Rowley, Dilip Kumar, Jesper Pedersen,
Rajkumar Raghuwanshi, Beena Emerson, Amul Sul, and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
Currently, partition pruning happens via constraint exclusion, but
there are pending places to replace that with a different and
hopefully faster mechanism. To be sure that we don't change behavior
without realizing it, add extensive test coverage.
Note that not all of these behaviors are optimal; in some cases,
partitions are not pruned even though it would be safe to do so.
These tests therefore serve to memorialize the current state rather
than the ideal state. Patches that improve things can update the test
results as appropriate.
Amit Langote, adjusted by me. Review and testing of the larger patch
set of which this is a part by Ashutosh Bapat, David Rowley, Dilip
Kumar, Jesper Pedersen, Rajkumar Raghuwanshi, Beena Emerson, Amul Sul,
and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
Apparently, scan-build thinks that proc->is_setof can change during
PLy_exec_function(). To make it clearer, save the value in a local
variable.
Also add an assertion to clear another warning.
Reviewed-by: John Naylor <jcnaylor@gmail.com>
Decorate PLy_elog() in a similar way as elog(), to give compilers and
static analyzers hints in which cases it does not return.
Reviewed-by: John Naylor <jcnaylor@gmail.com>
Commit d466335064 changed things so
that shm_toc_lookup would fail with an error rather than silently
returning NULL in the hope that such failures would be reported
in a useful way rather than via a system crash. However, it
overlooked the fact that the lookup of PARALLEL_KEY_ERROR_QUEUE
in ReinitializeParallelDSM is expected to fail when no DSM segment
was created in the first place; in that case, we end up with a
backend-private memory segment that still contains an entry for
PARALLEL_KEY_FIXED but no others. Consequently a benign failure
to initialize parallelism can escalate into an elog(ERROR);
repair.
Discussion: http://postgr.es/m/CA+Tgmob8LFw55DzH1QEREpBEA9RJ_W_amhBFCVZ6WMwUhVpOqg@mail.gmail.com
If we have a plan that uses parallelism but are unable to execute it
using parallelism, for example due to a lack of available DSM
segments, then the EState's es_query_dsa will be NULL. Parallel
bitmap heap scan needs to fall back to a non-parallel scan in such
cases.
Patch by me, reviewed by Dilip Kumar
Discussion: http://postgr.es/m/CAEepm=0kADK5inNf_KuemjX=HQ=PuTP0DykM--fO5jS5ePVFEA@mail.gmail.com
After d0aa965c0a, one error path in
PLy_spi_execute_fetch_result() could result in the variable "result"
being dereferenced after being set to NULL. To fix that, just clear the
resources right there and return early.
Also add another SPI_freetuptable() call so that that is cleared in all
error paths.
discovered by John Naylor <jcnaylor@gmail.com> via scan-build
Non-default range partitions have a constraint which include null
tests, and both default and non-default list partitions also have a
constraint which includes null tests, but for some reason this was
missed for default range partitions. This could cause the partition
constraint to evaluate to false for rows that were (correctly) routed
to that partition by insert tuple routing, which could in turn
cause constraint exclusion to prune the default partition in cases
where it should not.
Amit Langote, reviewed by Kyotaro Horiguchi
Discussion: http://postgr.es/m/ba7aaeb1-4399-220e-70b4-62eade1522d0@lab.ntt.co.jp
Doing this suppresses Coverity warnings and might allow improved
code in some cases. The prospects of that are not so bright as
to warrant back-patching, though.
Michael Paquier, per Coverity
heap_drop_with_catalog and ATExecDetachPartition neglected to check for
SearchSysCache failures, as noted in bugs #14927 and #14928 from Pan Bian.
Such failures are pretty unlikely, since we should already have some sort
of lock on the rel at these points, but it's neither a good idea nor
per project style to omit a check for failure.
Also, StorePartitionKey contained a syscache lookup that it never did
anything with, including never releasing the result. Presumably the
reason why we don't see refcount-leak complaints is that the lookup
always fails; but in any case it's pretty useless, so remove it.
All of these errors were evidently introduced by the relation
partitioning feature. Back-patch to v10 where that came in.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/20171127090105.1463.3962@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20171127091341.1468.72696@wrigleys.postgresql.org
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Discussion: https://postgr.es/m/20170514150525.0346ba72@postgrespro.ru
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog backup block seen so far. We now MAXALIGN the palloc size.
The original coding could result in many repeated palloc cycles, in the
worst case where we see a series ofgradually larger xlog records. We
ameliorate that similarly to 8735978e7a
by imposing a minimum buffer size of BLCKSZ.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog record seen so far. It turns out that that can result in
valgrind complaints, because some compilers will emit code that assumes
it can safely fetch padding bytes at the end of a struct, and those
padding bytes were unallocated so far as aset.c was concerned. We can
fix that by MAXALIGN'ing the palloc request size, ensuring that it is big
enough to include any possible padding that might've been omitted from
the on-disk record.
An additional objection to the original coding is that it could result in
many repeated palloc cycles, in the worst case where we see a series of
gradually larger xlog records. We can ameliorate that cheaply by
imposing a minimum buffer size that's large enough for most xlog records.
BLCKSZ/2 was chosen after a bit of discussion.
In passing, remove an obsolete comment in struct xl_heap_new_cid that the
combocid field is free due to alignment considerations. Perhaps that was
true at some point, but it's not now.
Back-patch to 9.5 where this code came in.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
The various has_*_privilege() functions all support an optional
WITH GRANT OPTION added to the supported privilege types to test
whether the privilege is held with grant option. That is, all except
has_sequence_privilege() variations. Fix that.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/005147f6-8280-42e9-5a03-dd2c1e4397ef@joeconway.com
Traditionally IANA has distributed their timezone data in pure source
form, replete with extensive historical comments. As of release 2017c,
they've added a compact single-file format that omits comments and
abbreviates command keywords. This form is way shorter than the pure
source, even before considering its allegedly better compressibility.
Hence, let's distribute the data in that form rather than pure source.
I'm pushing this now, rather than at the next timezone database update,
so that it's easy to confirm that this data file produces compiled zic
output that's identical to what we were getting before.
Discussion: https://postgr.es/m/1915.1511210334@sss.pgh.pa.us
When nodeValuesscan.c was written, it was impossible to have a SubPlan in
VALUES --- any sub-SELECT there would have to be uncorrelated and thereby
would produce an InitPlan instead. We therefore took a shortcut in the
logic that throws away a ValuesScan's per-row expression evaluation data
structures. This was broken by the introduction of LATERAL however; a
sub-SELECT containing a lateral reference produces a correlated SubPlan.
The cleanest fix for this would be to give up the optimization of
discarding the expression eval state. But that still seems pretty
unappetizing for long VALUES lists. It seems to work to just prevent
the subexpressions from hooking into the ValuesScan node's subPlan
list, so let's do that and see how well it works. (If this breaks,
due to additional connections between the subexpressions and the outer
query structures, we might consider compromises like throwing away data
only for VALUES rows not containing SubPlans.)
Per bug #14924 from Christian Duta. Back-patch to 9.3 where LATERAL
was introduced.
Discussion: https://postgr.es/m/20171124120836.1463.5310@wrigleys.postgresql.org
Commit 11e264517 removed BufFile's isTemp flag, thereby eliminating
the possibility of resurrecting BufFileCreate(). But it left that
function in place, as well as a bunch of comments describing how things
worked for the non-temp-file case. At best, that's now a source of
confusion. So remove the long-since-commented-out function and change
relevant comments.
I (tgl) wanted to rename BufFileCreateTemp() to BufFileCreate(), but
that seems not to be the consensus position, so leave it as-is.
In passing, fix commit f0828b2fc's failure to update BufFileSeek's
comment to match the change of its argument type from long to off_t.
(I think that might actually have been intentional at the time, but
now that 64-bit off_t is nearly universal, it looks anachronistic.)
Thomas Munro and Tom Lane
Discussion: https://postgr.es/m/E1eFVyl-0008J1-RO@gemulon.postgresql.org
Improve query_is_distinct_for() to accept SRFs in the targetlist when
we can prove distinctness from a DISTINCT clause. In that case the
de-duplication will surely happen after SRF expansion, so the proof
still works. Continue to punt in the case where we'd try to prove
distinctness from GROUP BY (or, in the future, source relations).
To do that, we'd have to determine whether the SRFs were in the
grouping columns or elsewhere in the tlist, and it still doesn't
seem worth the trouble. But this trivial change allows us to
recognize that "SELECT DISTINCT unnest(foo) FROM ..." produces
unique-ified output, which seems worth having.
Also, fix estimate_num_groups() to consider the possibility of SRFs in
the grouping columns. Its failure to do so was masked before v10 because
grouping_planner() scaled up plan rowcount estimates by the estimated SRF
multiplier after performing grouping. That doesn't happen anymore, which
is more correct, but it means we need an adjustment in the estimate for
the number of groups. Failure to do this leads to an underestimate for
the number of output rows of subqueries like "SELECT DISTINCT unnest(foo)"
compared to what 9.6 and earlier estimated, thus breaking plan choices
in some cases.
Per report from Dmitry Shalashov. Back-patch to v10 to avoid degraded
plan choices compared to previous releases.
Discussion: https://postgr.es/m/CAKPeCUGAeHgoh5O=SvcQxREVkoX7UdeJUMj1F5=aBNvoTa+O8w@mail.gmail.com
It's most often the case that the target list for the Gather (Merge)
node matches the target list supplied by the underlying plan node;
when this is so, we can avoid the overhead of projecting.
This depends on commit f455e1125e for
proper functioning.
Idea by Andres Freund. Patch by me. Review by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoZ0ZL=cesZFq8c9NnfK6bqy-wwUd3_74iYGodYrSoQ7Fw@mail.gmail.com
Revise aset.c so that all the "private" fields of chunk headers are
marked NOACCESS when outside the module, improving on the previous
coding which protected only requested_size. Fix a couple of corner
case bugs, such as failing to re-protect the header during a failure
exit from AllocSetRealloc, and wrong padding-size calculation for an
oversize allocation request.
Apply the same design to generation.c, and also fix several bugs therein
that I found by dint of hacking the code to use generation.c as the
standard allocator and then running the core regression tests with it.
Notably, we have to track the actual size of each block, else the
wipe_mem call in GenerationReset clears the wrong amount of memory for
an oversize-chunk block; and GenerationCheck needs a way of identifying
freed chunks that isn't fooled by palloc(0). I chose to fix the latter
by resetting the context pointer to NULL in a freed chunk, roughly like
what happens in a freed aset.c chunk.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
Add commentary about what we're doing and why. Apply the method used for
padding in GenerationChunk to AllocChunkData, replacing the rather ad-hoc
solution used in commit 7e3aa03b4. Reorder fields in GenerationChunk so
that the padding calculation will work even if sizeof(size_t) is different
from sizeof(void *) --- likely that will never happen, but we don't need
the assumption if we do it like this. Improve static assertions about
alignment.
In passing, fix a couple of oversights in the "large chunk" path in
GenerationAlloc().
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
The comments in get_policies_for_relation() say that CREATE POLICY
does not support defining restrictive policies. This is no longer
true, starting from PG10.
Noah Misch
Tom Lane
Andres Freund
Andrew Dunstan
Teodor Sigaev
Robert Haas
Peter Eisentraut
Magnus Hagander
Alvaro Herrera
Simon Riggs
Joe Conway
Dean Rasheed