Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
The explain format used by incremental sort was somewhat inconsistent
with other nodes, making it harder to parse and understand. This commit
addresses that by
- adding an extra space to better separate groups of values
- using colons instead of equal signs to separate key/value
- properly capitalizing first letter of a key
- using separate lines for full and pre-sorted groups
These changes were proposed by Justin Pryzby and mostly copy the final
explain format used to report WAL usage.
Author: Justin Pryzby
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/20200419023625.GP26953@telsasoft.com
Run renumber_oids.pl to move high-numbered OIDs down, as per pre-beta
tasks specified by RELEASE_CHANGES. For reference, the command was
./renumber_oids.pl --first-mapped-oid=8000 --target-oid=5032
Also run reformat_dat_file.pl while I'm here.
Renumbering recently-added types changed some results in the opr_sanity
test. To make those a bit easier to eyeball-verify, change the queries
to show regtype not just bare type OIDs. (I think we didn't have
regtype when these queries were written.)
The existing callers of XLogReadDetermineTimeline() performing recovery
need to check a replay LSN position when determining on which timeline
to read a WAL page. A portion of the comment describing this function
said exactly that, while referring to a routine for fetching a write
LSN, something not available in recovery.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200511.101619.2043820539323292957.horikyota.ntt@gmail.com
Restructure the function that locates the root of the to-be-deleted
subtree during nbtree page deletion. Handle the conditions that make
page deletion unsafe in a slightly more uniform way, and acknowledge the
fact that the behavior with incomplete splits on internal pages is
different (as pointed out in the nbtree README as of commit 35bc0ec7).
Also invent new terminology that avoids ambiguity around which pages are
about to be deleted. Consistently use the term "to-be-deleted subtree",
not the ambiguous term "branch".
We were calling the subtree parent page the "top parent page", but that
was quite misleading. The top parent page usually refers to a page
unlinked from its siblings and marked deleted (during the second stage
of page deletion). There was one kind of top parent page that we merely
removed a downlink from, and another kind of top parent page that we
actually marked deleted. Eliminate the ambiguity by inventing a new
term ("subtree parent page") that refers to the former kind of page
only.
The one in xlogreader.h was pointed out by Antonin Houska; I (Álvaro) noticed the
others by grepping.
Author: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/28250.1589186654@antos
Somehow we'd never noticed this oversight, even though it means
that such basic columns as pg_proc.proargtypes were not being
validated by the oidjoins test. Correct the query and update
the test script with the newly-found dependencies.
Incremental sort always processes at least one full group group before
switching to prefix groups, so it's enough to check just the number of
full groups. There was no risk of division by zero due to the extra
condition, but it made the code harder to understand.
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAp+7qoS92-4V1vLChpdY3vEkLCbf+gye6P-4cirE-0z0A@mail.gmail.com
ExecReScanIncrementalSort was resetting bounded=false, which means the
optimization would be disabled on all rescans. This happens because
ExecSetTupleBound is called before the rescan, not after it.
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
The executor flags were not handled entirely correctly, although the
bugs were mostly harmless and it was mostly comment inaccuracy. We don't
need to strip any of the flags for child nodes.
Incremental sort does not support backward scans of mark/restore, so
MARK/BACKWARDS flags should not be possible. So we simply ensure this
using an assert, and we don't bother removing them when initializing
the child node.
With REWIND it's a bit less clear - incremental sort does not support
REWIND, but there is no way to signal this - it's legal to just ignore
the flag. We however continue passing the flag to child nodes, because
they might be useful to leverage that.
Reported-by: Michael Paquier
Author: James Coleman
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/20200414065336.GI1492@paquier.xyz
We seem to have forgotten to do this in the v12 cycle, so add it as
a task in the RELEASE_CHANGES list, in hopes we won't forget again.
While here, fix findoidjoins.c so that it actually works in the
new dispensation where OID is a regular column, and change it to only
consider system relations (this avoids being fooled by the OID column
in the brintest test table).
Also tweak the largeobject test so that the somewhat-recently-added
manual creation of a LO with an OID in the system range doesn't
fool findoidjoins.c. For the moment I just made that use an unused
OID, but we might have to find a more robust solution someday.
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
There were a few different ways to line-wrap the error messages. Make
them all the same, and use placeholders for the actual program names,
to save translation work.
TimelineHistoryRead and TimelineHistoryWrite wait events are reported
during waiting for a read and write of a timeline history file, respectively.
However, previously, TimelineHistoryRead wait event was not reported
while readTimeLineHistory() was reading a timeline history file. Also
TimelineHistoryWrite was not reported while writeTimeLineHistory() was
writing one line with the details of the timeline split, at the end.
This commit fixes these issues.
Back-patch to v10 where wait events for a timeline history file was added.
Author: Masahiro Ikeda
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/d11b0c910b63684424e06772eb844ab5@oss.nttdata.com
Factor out code common to _bt_lock_branch_parent() and _bt_pagedel()
into a new utility function. This new function is used to check that
the left sibling of a deletion target page does not have the
INCOMPLETE_SPLIT page flag set. If it is set then deletion is unsafe;
there won't be a usable pivot tuple (with a downlink) in the parent page
that points to the deletion target page. The page deletion algorithm is
not prepared to deal with that. Also restructure an existing, related
utility function that checks if the right sibling of the target page has
the ISHALFDEAD page flag set.
This organization highlights the symmetry between the two cases. The
goal is to make the design of page deletion clearer. Both functions
involve a sibling page with a flag that indicates that there was an
interrupted operation (a page split or a page deletion) that resulted in
a page pointed to by sibling pages, but not pointed to in the parent.
And, both functions indicate if page deletion is unsafe due to the
absence of a particular downlink in the parent page.
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
Attempting to use an installation path of Python that includes spaces
caused the MSVC builds to fail. This fixes the issue by using the same
quoting method as ad7595b for OpenSSL.
Author: Victor Wagner
Discussion: https://postgr.es/m/20200430150608.6dc6b8c4@antares.wagner.home
Backpatch-through: 9.5
Both the backend and libpq leaked buffers containing encrypted data
to be transmitted, so that the process size would grow roughly as
the total amount of data sent.
There were also far-less-critical leaks of the same sort in GSSAPI
session establishment.
Oversight in commit b0b39f72b, which I failed to notice while
reviewing the code in 2c0cdc818.
Per complaint from pmc@citylink.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200504115649.GA77072@gate.oper.dinoex.org
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Remove one of the arguments to btvacuumpage(), and give up on the idea
that it's a recursive function. We now use the term "backtracking" to
refer to the case where an earlier block must be visited to make sure no
tuples that need to be removed were missed.
Advertising btvacuumpage() as a recursive function was unhelpful. In
reality the function always simulates recursion with a loop (it doesn't
actually call itself). This wasn't just necessary as a precaution (per
the comments mentioning tail recursion), though. There is no reliable
natural limit on the number of times we can backtrack.
There are important behavioral difference when "recursing"/backtracking,
mostly related to page deletion. We don't perform page deletion when
backtracking due to the extra complexity. And when we recurse, we're
not performing a physical order scan anymore, so we expect fairly
different conditions to hold for the page. Structuring the code like
this makes it clearer how _bt_pagedel() cooperates with btvacuumpage()
and btvacuumscan() (as established in commit b0229f26 and commit
73a076b0).
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzmRGMDWiLMcb+zagG9652PboNN4Gfcq1Gc_wJL6A716MA@mail.gmail.com
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
On further reflection, code comments added by commit b0229f26 slightly
misrepresented how we determine the oldest bpto.xact for the index.
btvacuumpage() does not treat the bpto.xact of a page that it put in the
FSM as a candidate to be the oldest deleted page (the delete-marked page
that has the oldest bpto.xact XID among all pages encountered).
The definition of a deleted page for the purposes of the bpto.xact
calculation is different from the definition used by the bulk delete
statistics. The bulk delete statistics don't distinguish between pages
that were deleted by the current VACUUM, pages deleted by a previous
VACUUM operation but not yet recyclable/reusable, and pages that are
reusable (though reusable pages are counted separately).
Backpatch: 11-, just like commit b0229f26.
The logic for determining how many nbtree pages in an index are deleted
pages sometimes undercounted pages. Pages that were deleted by the
current VACUUM operation (as opposed to some previous VACUUM operation
whose deleted pages have yet to be reused) were sometimes overlooked.
The final count is exposed to users through VACUUM VERBOSE's "%u index
pages have been deleted" output.
btvacuumpage() avoided double-counting when _bt_pagedel() deleted more
than one page by assuming that only one page was deleted, and that the
additional deleted pages would get picked up during a future call to
btvacuumpage() by the same VACUUM operation. _bt_pagedel() can
legitimately delete pages that the btvacuumscan() scan will not visit
again, though, so that assumption was slightly faulty.
Fix the accounting by teaching _bt_pagedel() about its caller's
requirements. It now only reports on pages that it knows btvacuumscan()
won't visit again (including the current btvacuumpage() page), so
everything works out in the end.
This bug has been around forever. Only backpatch to v11, though, to
keep _bt_pagedel() is sync on the branches that have today's bugfix
commit b0229f26da. Note that this commit changes the signature of
_bt_pagedel(), just like commit b0229f26da.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-
Commit 857f9c36cd (which taught nbtree VACUUM to skip a scan of the
index from btcleanup in situations where it doesn't seem worth it) made
VACUUM maintain the oldest btpo.xact among all deleted pages for the
index as a whole. It failed to handle all the details surrounding pages
that are deleted by the current VACUUM operation correctly (though pages
deleted by some previous VACUUM operation were processed correctly).
The most immediate problem was that the special area of the page was
examined without a buffer pin at one point. More fundamentally, the
handling failed to account for the full range of _bt_pagedel()
behaviors. For example, _bt_pagedel() sometimes deletes internal pages
in passing, as part of deleting an entire subtree with btvacuumpage()
caller's page as the leaf level page. The original leaf page passed to
_bt_pagedel() might not be the page that it deletes first in cases where
deletion can take place.
It's unclear how disruptive this bug may have been, or what symptoms
users might want to look out for. The issue was spotted during
unrelated code review.
To fix, push down the logic for maintaining the oldest btpo.xact to
_bt_pagedel(). btvacuumpage() is now responsible for pages that were
fully deleted by a previous VACUUM operation, while _bt_pagedel() is now
responsible for pages that were deleted by the current VACUUM operation
(this includes half-dead pages from a previous interrupted VACUUM
operation that become fully deleted in _bt_pagedel()). Note that
_bt_pagedel() should never encounter an existing deleted page.
This commit theoretically breaks the ABI of a stable release by changing
the signature of _bt_pagedel(). However, if any third party extension
is actually affected by this, then it must already be completely broken
(since there are numerous assumptions made in _bt_pagedel() that cannot
be met outside of VACUUM). It seems highly unlikely that such an
extension actually exists, in any case.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-, where the "skip full scan" feature was introduced.
Add test coverage for the nbtutils.c routines concerned with IndexScans
that have native ScalarArrayOpExpr quals. The ScalarArrayOpExpr
specialized mark and restore routines, and the "find extreme element"
routine now have some test coverage.
These functions are probably infrequently exercised by real world
queries, so having some coverage seems like a good idea. The mark and
restore routines were originally added by a bugfix that came several
weeks after the first stable release of Postgres 9.2 (see commit
70bc583319).
The libpq parameters ssl{max|min}protocolversion are renamed to use
underscores, to become ssl_{max|min}_protocol_version. The related
environment variables still use the names introduced in commit ff8ca5f
that added the feature.
Per complaint from Peter Eisentraut (this was also mentioned by me in
the original patch review but the issue got discarded).
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/b319e449-318d-e691-4997-1327e166fcc4@2ndquadrant.com
