Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
checkcondition_str() failed to report multiple matches for a prefix
pattern correctly: it would dutifully merge the match positions, but
then after exiting that loop, if the last prefix-matching word had
had no suitable positions, it would report there were no matches.
The upshot would be failing to recognize a match that the query
should match.
It looks like you need all of these conditions to see the bug:
* a phrase search (else we don't ask for match position details)
* a prefix search item (else we don't get to this code)
* a weight restriction (else checkclass_str won't fail)
Noted while investigating a problem report from Pavel Borisov,
though this is distinct from the issue he was on about.
Back-patch to 9.6 where phrase search was added.
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
Queries such as '!(foo<->bar)' failed to find matching rows when
implemented as a GiST or GIN index search. That's because of
failing to handle phrase searches as tri-valued when considering
a query without any position information for the target tsvector.
We can only say that the phrase operator might match, not that it
does match; and therefore its NOT also might match. The previous
coding incorrectly inverted the approximate phrase result to
decide that there was certainly no match.
To fix, we need to make TS_phrase_execute return a real ternary result,
and then bubble that up accurately in TS_execute. As long as we have
to do that anyway, we can simplify the baroque things TS_phrase_execute
was doing internally to manage tri-valued searching with only a bool
as explicit result.
For now, I left the externally-visible result of TS_execute as a plain
bool. There do not appear to be any outside callers that need to
distinguish a three-way result, given that they passed in a flag
saying what to do in the absence of position data. This might need
to change someday, but we wouldn't want to back-patch such a change.
Although tsginidx.c has its own TS_execute_ternary implementation for
use at upper index levels, that sadly managed to get this case wrong
as well :-(. Fixing it is a lot easier fortunately.
Per bug #16388 from Charles Offenbacher. Back-patch to 9.6 where
phrase search was introduced.
Discussion: https://postgr.es/m/16388-98cffba38d0b7e6e@postgresql.org
In the footsteps of aaf069aa3, remove ACLDEBUG, which was the only
other remaining undocumented symbol in pg_config_manual.h. The fact
that nobody had bothered to document it in seventeen years is a good
clue to its usefulness. In practice, none of the tracing logic it
enabled would be of any value without additional effort.
Discussion: https://postgr.es/m/6631.1587565046@sss.pgh.pa.us
Nobody really uses this stuff, especially not since we created
valgrind-based infrastructure that does the same thing better.
It is thus unsurprising that the generation.c and slab.c versions
were actually broken. Rather than fix 'em, let's just remove 'em.
Alexander Lakhin
Discussion: https://postgr.es/m/8936216c-3492-3f6e-634b-d638fddc5f91@gmail.com
Working on commit 1c455078b led me to check through FunctionCallInvoke
call sites to see if every one was being honest about (a) making sure
that fcinfo.isnull is initially false, and (b) checking its state after
the call. Sure enough, I found some violations.
The main one is that finalize_partialaggregate re-used serialfn_fcinfo
without resetting isnull, even though it clearly intends to cater for
serialfns that return NULL. There would only be an issue with a
non-strict serialfn, since it's unlikely that a serialfn would return
NULL for non-null input. We have no non-strict serialfns in core, and
there may be none in the wild either, which would account for the lack
of complaints. Still, it's clearly wrong, so back-patch that fix to
9.6 where finalize_partialaggregate was introduced.
Also, arrayfuncs.c and rowtypes.c contained various callers that were
not bothering to check for result nulls. While what's being called is
a comparison or hash function that probably *shouldn't* return null,
that's a lousy excuse for not having any check at all. There are
existing places that just Assert(!fcinfo->isnull) in comparable
situations, so I added that to the places that were calling btree
comparison or hash support functions. In the places calling
boolean-returning equality functions, it's quite cheap to have them
treat isnull as FALSE, so make those places do that. Also remove some
"locfcinfo->isnull = false" assignments that are unnecessary given the
assumption that no previous call returned null. These changes seem like
mostly neatnik-ism or debugging support, so I didn't back-patch.
Although selfuncs.c will never call a target operator with null inputs,
some functions might return null anyway. The existing coding will fail
if that happens (since FunctionCall2Coll will punt), which seems
undesirable given that matchingsel() has such a broad range of potential
applicability --- in fact, we already have a problem because we apply it
to jsonb_path_exists_opr, which can return null. Hence, rejigger the
underlying functions mcv_selectivity and histogram_selectivity to cope,
treating a null result as false.
While we are at it, we can move the InitFunctionCallInfoData overhead
out of the inner loops, which isn't a huge number of cycles but might
save something considering we are likely calling functions as cheap
as int4eq(). Plus, the number of loop cycles to be expected is much
more than it was when this code was written, since typical settings
of default_statistics_target are higher.
In view of that consideration, let's apply the same change to
var_eq_const, eqjoinsel_inner, and eqjoinsel_semi. We do not expect
equality functions to ever return null for non-null inputs (and
certainly that code has been that way a long time without complaints),
but the cycle savings seem attractive, especially in the eqjoinsel loops
where there's potentially an O(N^2) savings.
Similar code exists in ineq_histogram_selectivity and
get_variable_range, but I forebore from changing those for now.
The performance argument for changing ineq_histogram_selectivity
is really weak anyway, since that will only iterate log2(N) times.
Nikita Glukhov and Tom Lane
Discussion: https://postgr.es/m/9d3b0959-95d6-c37e-2c0b-287bcfe5c705@postgrespro.ru
The views pg_stat_progress_* had not gotten the memo that
pg_read_all_stats is supposed to be able to read all statistics. Also
make a pass over all text-returning pg_stat_xyz functions that could
return "insufficient privilege" and make sure they also respect
pg_read_all_status.
Reported-by: Andrey M. Borodin
Reviewed-by: Andrey M. Borodin, Kyotaro Horiguchi
Discussion: https://postgr.es/m/13145F2F-8458-4977-9D2D-7B2E862E5722@yandex-team.ru
We've had a mixture of the warnings pragma, the -w switch on the shebang
line, and no warnings at all. This patch removes the -w swicth and add
the warnings pragma to all perl sources missing it. It raises the
severity of the TestingAndDebugging::RequireUseWarnings perlcritic
policy to level 5, so that we catch any future violations.
Discussion: https://postgr.es/m/20200412074245.GB623763@rfd.leadboat.com
To control whether partition changes are replicated using their own
identity and schema or an ancestor's, add a new parameter that can be
set per publication named 'publish_via_partition_root'.
This allows replicating a partitioned table into a different partition
structure on the subscriber.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
2nd pass of modifying various places which obtain the next power
of 2 of a number and make them use the new functions added in
f0705bb62.
In passing, also modify num_combinations(). This can be implemented
using simple bitshifting rather than looping.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
First pass of modifying various places that obtain the next power of 2 of
a number and make them use the new functions added in pg_bitutils.h
instead.
This also removes the _hash_log2() function. There are no longer any
callers in core. Other users can swap their _hash_log2(n) call to make use
of pg_ceil_log2_32(n).
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. Lift that restriction by redeclaring the
bit number arguments as int8 (which requires a catversion bump,
hence is not back-patchable).
The similarly-named functions for bit/varbit don't really have a
problem because we restrict those types to at most VARBITMAXLEN bits;
hence leave them alone.
While here, extend the encode/decode functions in utils/adt/encode.c
to allow dealing with values wider than 1GB. This is not a live bug
or restriction in current usage, because no input could be more than
1GB, and since none of the encoders can expand a string more than 4X,
the result size couldn't overflow uint32. But it might be desirable
to support more in future, so make the input length values size_t
and the potential-output-length values uint64.
Also add some test cases to improve the miserable code coverage
of these functions.
Movead Li, editorialized some by me; also reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
This is for the benefit of running postgres under the rr
debugger. When using rr signal handlers running while a syscall is
active use an alternative stack. As e.g. bgworkers are started from
within signal handlers, the forked backend then has a different stack
base than postmaster. Previously that subsequently lead to those
processes triggering spurious "stack depth limit exceeded" errors.
Discussion: https://postgr.es/m/20200327182217.ubrrl32lyfhxfwk5@alap3.anarazel.de
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
Early versions of opclass options patch uses zero support procedure as opclass
options procedure. This commit removes rudiments of it, which were committed
in 911e702077. Also, it implements correct handling of amoptsprocnum == 0.
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
This commit adds query_string argument into the planner-related functions
and hook and allows us to pass the query string to them.
Currently there is no user of the query string passed. But the upcoming patch
for the planning counters will add the planning hook function into
pg_stat_statements and the function will need the query string. So this change
will be necessary for that patch.
Also this change is useful for some extensions that want to use the query
string in their planner hook function.
Author: Pascal Legrand, Julien Rouhaud
Reviewed-by: Yoshikazu Imai, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAOBaU_bU1m3_XF5qKYtSj1ua4dxd=FWDyh2SH4rSJAUUfsGmAQ@mail.gmail.com
Discussion: https://postgr.es/m/1583789487074-0.post@n3.nabble.com
In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
Instead of using Newton's method to compute numeric square roots, use
the Karatsuba square root algorithm, which performs better for numbers
of all sizes. In practice, this is 3-5 times faster for inputs with
just a few digits and up to around 10 times faster for larger inputs.
Also, the new algorithm guarantees that the final digit of the result
is correctly rounded, since it computes an integer square root with
truncation, containing at least 1 extra decimal digit before rounding.
The former algorithm would occasionally round the wrong way because
it rounded both the intermediate and final results.
In addition, arrange for sqrt_var() to explicitly support negative
rscale values (rounding before the decimal point). This allows the
argument reduction phase of ln_var() to be optimised for large inputs,
since it only needs to compute square roots with a few more digits
than the final ln() result, rather than computing all the digits
before the decimal point. For very large inputs, this can be many
thousands of times faster.
In passing, optimise div_var_fast() in a couple of places where it was
doing unnecessary work.
Patch be me, reviewed by Tom Lane and Tels.
Discussion: https://postgr.es/m/CAEZATCV1A7+jD3P30Zu31KjaxeSEyOn3v9d6tYegpxcq3cQu-g@mail.gmail.com
Traditionally autovacuum has only ever invoked a worker based on the
estimated number of dead tuples in a table and for anti-wraparound
purposes. For the latter, with certain classes of tables such as
insert-only tables, anti-wraparound vacuums could be the first vacuum that
the table ever receives. This could often lead to autovacuum workers being
busy for extended periods of time due to having to potentially freeze
every page in the table. This could be particularly bad for very large
tables. New clusters, or recently pg_restored clusters could suffer even
more as many large tables may have the same relfrozenxid, which could
result in large numbers of tables requiring an anti-wraparound vacuum all
at once.
Here we aim to reduce the work required by anti-wraparound and aggressive
vacuums in general, by triggering autovacuum when the table has received
enough INSERTs. This is controlled by adding two new GUCs and reloptions;
autovacuum_vacuum_insert_threshold and
autovacuum_vacuum_insert_scale_factor. These work exactly the same as the
existing scale factor and threshold controls, only base themselves off the
number of inserts since the last vacuum, rather than the number of dead
tuples. New controls were added rather than reusing the existing
controls, to allow these new vacuums to be tuned independently and perhaps
even completely disabled altogether, which can be done by setting
autovacuum_vacuum_insert_threshold to -1.
We make no attempt to skip index cleanup operations on these vacuums as
they may trigger for an insert-mostly table which continually doesn't have
enough dead tuples to trigger an autovacuum for the purpose of removing
those dead tuples. If we were to skip cleaning the indexes in this case,
then it is possible for the index(es) to become bloated over time.
There are additional benefits to triggering autovacuums based on inserts,
as tables which never contain enough dead tuples to trigger an autovacuum
are now more likely to receive a vacuum, which can mark more of the table
as "allvisible" and encourage the query planner to make use of Index Only
Scans.
Currently, we still obey vacuum_freeze_min_age when triggering these new
autovacuums based on INSERTs. For large insert-only tables, it may be
beneficial to lower the table's autovacuum_freeze_min_age so that tuples
are eligible to be frozen sooner. Here we've opted not to zero that for
these types of vacuums, since the table may just be insert-mostly and we
may otherwise freeze tuples that are still destined to be updated or
removed in the near future.
There was some debate to what exactly the new scale factor and threshold
should default to. For now, these are set to 0.2 and 1000, respectively.
There may be some motivation to adjust these before the release.
Author: Laurenz Albe, Darafei Praliaskouski
Reviewed-by: Alvaro Herrera, Masahiko Sawada, Chris Travers, Andres Freund, Justin Pryzby
Discussion: https://postgr.es/m/CAC8Q8t%2Bj36G_bLF%3D%2B0iMo6jGNWnLnWb1tujXuJr-%2Bx8ZCCTqoQ%40mail.gmail.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Buildfarm experience shows what probably should've occurred to me before:
if a cache flush occurs partway through building a generic plan, then
the plansource may have is_valid = false even though the plan is valid.
We need to accept this case, use the generated plan, and then try to
replan the next time. We can't try to replan immediately, because that
would produce an infinite loop in CLOBBER_CACHE_ALWAYS builds; moreover
it's really overkill. (We can assume that the plan is valid, it's just
possibly a bit stale. Note that the pre-existing code behaved this way,
and the non-simple-expression code paths do too.) Conversely, not using
the generated plan would drop us into the not-a-simple-expression code
path, which is bad for performance and would also cause regression-test
failures due to visibly different error-reporting behavior.
Hence, refactor the validity-check functions so that the initial check
and recheck cases can react differently to plansource->is_valid.
This makes their usage a bit simpler, too.
Discussion: https://postgr.es/m/7072.1585332104@sss.pgh.pa.us
For relatively simple expressions (say, "x + 1" or "x > 0"), plpgsql's
management overhead exceeds the cost of evaluating the expression.
This patch substantially improves that situation, providing roughly
2X speedup for such trivial expressions.
First, add infrastructure in the plancache to allow fast re-validation
of cached plans that contain no table access, and hence need no locks.
Teach plpgsql to use this infrastructure for expressions that it's
already deemed "simple" (which in particular will never contain table
references).
The fast path still requires checking that search_path hasn't changed,
so provide a fast path for OverrideSearchPathMatchesCurrent by
counting changes that have occurred to the active search path in the
current session. This is simplistic but seems enough for now, seeing
that PushOverrideSearchPath is not used in any performance-critical
cases.
Second, manage the refcounts on simple expressions' cached plans using
a transaction-lifespan resource owner, so that we only need to take
and release an expression's refcount once per transaction not once per
expression evaluation. The management of this resource owner exactly
parallels the existing management of plpgsql's simple-expression EState.
Add some regression tests covering this area, in particular verifying
that expression caching doesn't break semantics for search_path changes.
Patch by me, but it owes something to previous work by Amit Langote,
who recognized that getting rid of plancache-related overhead would
be a useful thing to do here. Also thanks to Andres Freund for review.
Discussion: https://postgr.es/m/CAFj8pRDRVfLdAxsWeVLzCAbkLFZhW549K+67tpOc-faC8uH8zw@mail.gmail.com
This reverts the parts of commit 17a28b0364
that changed ereport's auxiliary functions from returning dummy integer
values to returning void. It turns out that a minority of compilers
complain (not entirely unreasonably) about constructs such as
(condition) ? errdetail(...) : 0
if errdetail() returns void rather than int. We could update those
call sites to say "(void) 0" perhaps, but the expectation for this
patch set was that ereport callers would not have to change anything.
And this aspect of the patch set was already the most invasive and
least compelling part of it, so let's just drop it.
Per buildfarm.
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
Alvaro Herrera
Tomas Vondra
Tom Lane
Alexander Korotkov
Peter Eisentraut
Magnus Hagander
Jeff Davis
Michael Paquier
Andrew Dunstan
David Rowley
Thomas Munro
Andres Freund
Noah Misch
Fujii Masao
Dean Rasheed