Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
The DTK_DOW/DTK_ISODOW and DTK_DOY switch cases in timestamp_part() and
timestamptz_part() contained calls of timestamp2tm() that were fully
redundant with the ones done just above the switch. This evidently crept
in during commit 258ee1b63, which relocated that code from another place
where the calls were indeed needed. Just delete the redundant calls.
I (tgl) noted that our test coverage of these functions left quite a
bit to be desired, so extend timestamp.sql and timestamptz.sql to
cover all the branches.
Back-patch to all supported branches, as the previous commit was.
There's no real issue here other than some wasted cycles in some
not-too-heavily-used code paths, but the test coverage seems valuable.
Report and patch by Li Japin; test case adjustments by me.
Discussion: https://postgr.es/m/SG2PR06MB37762CAE45DB0F6CA7001EA9B6550@SG2PR06MB3776.apcprd06.prod.outlook.com
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
While casting from timestamp to timestamptz we do timestamp2tm() then
tm2timestamp(). This commit eliminates call to tm2timestamp(). Instead, it
directly applies timezone offset to the original timestamp value. That makes
upcoming datetime overflow handling in jsonpath easier. That should also save
us some CPU cycles.
Discussion: https://postgr.es/m/CAPpHfdvRPRh_mTGar5WmDeRZ%3DU5dOXHdxspYYD%3D76m3knNGjXA%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Add support of error suppression in some date and time manipulation functions
as it's required for jsonpath .datetime() method support. This commit doesn't
use PG_TRY()/PG_CATCH() in order to implement that. Instead, it provides
internal versions of date and time functions used, which support error
suppression.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov, Nikita Glukhov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL Standard 2016 defines FF1-FF9 format patters for fractions of seconds in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. Parsing
engine of upcoming .datetime() method will be shared with to_date()/
to_timestamp().
This patch implements FF1-FF6 format patterns for upcoming jsonpath .datetime()
method. to_date()/to_timestamp() functions will also get support of this
format patterns as positive side effect. FF7-FF9 are not supported due to
lack of precision in our internal timestamp representation.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
The date/time values 'current', 'invalid', and 'undefined' were
removed a long time ago, but the code still contains explicit error
handling for the transition. To simplify the code and avoid having to
handle these values everywhere, just remove the recognition of these
tokens altogether now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
... as well as its implementation from backend/access/hash/hashfunc.c to
backend/utils/hash/hashfn.c.
access/hash is the place for the hash index AM, not really appropriate
for generic facilities, which is what hash_any is; having things the old
way meant that anything using hash_any had to include the AM's include
file, pointlessly polluting its namespace with unrelated, unnecessary
cruft.
Also move the HTEqual strategy number to access/stratnum.h from
access/hash.h.
To avoid breaking third-party extension code, add an #include
"utils/hashutils.h" to access/hash.h. (An easily removed line by
committers who enjoy their asbestos suits to protect them from angry
extension authors.)
Discussion: https://postgr.es/m/201901251935.ser5e4h6djt2@alvherre.pgsql
When the timezone is UTC, timestamptz and timestamp are binary coercible
in both directions. See b8a18ad485 and
c22ecc6562 for the previous attempt in
this problem space. Skip the table rewrite; for now, continue to
needlessly rewrite any index on an affected column.
Reviewed by Simon Riggs and Tom Lane.
Discussion: https://postgr.es/m/20190226061450.GA1665944@rfd.leadboat.com
Rename/repurpose pg_proc.protransform as "prosupport". The idea is
still that it names an internal function that provides knowledge to
the planner about the behavior of the function it's attached to;
but redesign the API specification so that it's not limited to doing
just one thing, but can support an extensible set of requests.
The original purpose of simplifying a function call is handled by
the first request type to be invented, SupportRequestSimplify.
Adjust all the existing transform functions to handle this API,
and rename them fron "xxx_transform" to "xxx_support" to reflect
the potential generalization of what they do. (Since we never
previously provided any way for extensions to add transform functions,
this change doesn't create an API break for them.)
Also add DDL and pg_dump support for attaching a support function to a
user-defined function. Unfortunately, DDL access has to be restricted
to superusers, at least for now; but seeing that support functions
will pretty much have to be written in C, that limitation is just
theoretical. (This support is untested in this patch, but a follow-on
patch will add cases that exercise it.)
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
date_trunc(field, timestamptz, zone_name) performs truncation using
the named time zone as reference, rather than working in the session
time zone as is the default behavior. It's equivalent to
date_trunc(field, timestamptz at time zone zone_name) at time zone zone_name
but it's faster, easier to type, and arguably easier to understand.
Vik Fearing and Tom Lane
Discussion: https://postgr.es/m/6249ffc4-2b22-4c1b-4e7d-7af84fedd7c6@2ndquadrant.com
localtime.c's "struct state" is a rather large object, ~23KB. We were
statically allocating one for gmtsub() to use to represent the GMT
timezone, even though that function is not at all heavily used and is
never reached in most backends. Let's malloc it on-demand, instead.
This does pose the question of how to handle a malloc failure, but
there's already a well-defined error report convention here, ie
set errno and return NULL.
We have but one caller of pg_gmtime in HEAD, and two in back branches,
neither of which were troubling to check for error. Make them do so.
The possible errors are sufficiently unlikely (out-of-range timestamp,
and now malloc failure) that I think elog() is adequate.
Back-patch to all supported branches to keep our copies of the IANA
timezone code in sync. This particular change is in a stanza that
already differs from upstream, so it's a wash for maintenance purposes
--- but only as long as we keep the branches the same.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
We include <float.h> in every place that needs isnan(), because MSVC
used to require it. However, since MSVC 2013 that's no longer necessary
(cf. commit cec8394b5c), so we can retire the inclusion to a
version-specific stanza in win32_port.h, where it doesn't need to
pollute random .c files. The header is of course still needed in a few
places for other reasons.
I (Álvaro) removed float.h from a few more files than in Emre's original
patch. This doesn't break the build in my system, but we'll see what
the buildfarm has to say about it all.
Author: Emre Hasegeli
Discussion: https://postgr.es/m/CAE2gYzyc0+5uG+Cd9-BSL7NKC8LSHLNg1Aq2=8ubjnUwut4_iw@mail.gmail.com
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
When using integer timestamps, the interval-comparison functions tried
to compute the overall magnitude of an interval as an int64 number of
microseconds. As reported by Frazer McLean, this overflows for intervals
exceeding about 296000 years, which is bad since we nominally allow
intervals many times larger than that. That results in wrong comparison
results, and possibly in corrupted btree indexes for columns containing
such large interval values.
To fix, compute the magnitude as int128 instead. Although some compilers
have native support for int128 calculations, many don't, so create our
own support functions that can do 128-bit addition and multiplication
if the compiler support isn't there. These support functions are designed
with an eye to allowing the int128 code paths in numeric.c to be rewritten
for use on all platforms, although this patch doesn't do that, or even
provide all the int128 primitives that will be needed for it.
Back-patch as far as 9.4. Earlier releases did not guard against overflow
of interval values at all (commit 146604ec4 fixed that), so it seems not
very exciting to worry about overly-large intervals for them.
Before 9.6, we did not assume that unreferenced "static inline" functions
would not draw compiler warnings, so omit functions not directly referenced
by timestamp.c, the only present consumer of int128.h. (We could have
omitted these functions in HEAD too, but since they were written and
debugged on the way to the present patch, and they look likely to be needed
by numeric.c, let's keep them in HEAD.) I did not bother to try to prevent
such warnings in a --disable-integer-datetimes build, though.
Before 9.5, configure will never define HAVE_INT128, so the part of
int128.h that exploits a native int128 implementation is dead code in the
9.4 branch. I didn't bother to remove it, thinking that keeping the file
looking similar in different branches is more useful.
In HEAD only, add a simple test harness for int128.h in src/tools/.
In back branches, this does not change the float-timestamps code path.
That's not subject to the same kind of overflow risk, since it computes
the interval magnitude as float8. (No doubt, when this code was originally
written, overflow was disregarded for exactly that reason.) There is a
precision hazard instead :-(, but we'll avert our eyes from that question,
since no complaints have been reported and that code's deprecated anyway.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/1490104629.422698.918452336.26FA96B7@webmail.messagingengine.com
The S/390 members of the buildfarm are showing failures indicating
that they're having trouble with the rint() calls I added yesterday.
There's no good reason for that, and I wonder if it is a compiler bug
similar to the one we worked around in d9476b838. Try to fix it using
the same method as before, namely to store the result of rint() back
into a "double" variable rather than immediately converting to int64.
(This isn't entirely waving a dead chicken, since on machines with
wider-than-double float registers, the extra store forces a width
conversion. I don't know if S/390 is like that, but it seems worth
trying.)
In passing, merge duplicate ereport() calls in float8_timestamptz().
Per buildfarm.
When converting a float value to integer microseconds, we should be careful
to round the value to the nearest integer, typically with rint(); simply
assigning to an int64 variable will truncate, causing apparently off-by-one
values in cases that should work. Most places in the datetime code got
this right, but not these two.
float8_timestamptz() is new as of commit e511d878f (9.6). Previous
versions effectively depended on interval_mul() to do roundoff correctly,
which it does, so this fixes an accuracy regression in 9.6.
The problem in make_interval() dates to its introduction in 9.4. Aside
from being careful to round not truncate, let's incorporate the hours and
minutes inputs into the result with exact integer arithmetic, rather than
risk introducing roundoff error where there need not have been any.
float8_timestamptz() problem reported by Erik Nordström, though this is
not his proposed patch. make_interval() problem found by me.
Discussion: https://postgr.es/m/CAHuQZDS76jTYk3LydPbKpNfw9KbACmD=49dC4BrzHcfPv6yA1A@mail.gmail.com
These resulted in wrong answers if the relabeled argument could be matched
to an index column, as shown in bug #14504 from Evgeniy Kozlov. We might
be able to resurrect these optimizations by adjusting the planner's
treatment of RelabelType, or by adjusting btree's rules for selecting
comparison functions, but either solution will take careful analysis
and does not sound like a fit candidate for backpatching.
I left the catalog infrastructure in place and just reduced the transform
functions to always-return-NULL. This would be necessary anyway in the
back branches, and it doesn't seem important to be more invasive in HEAD.
Bug introduced by commit b8a18ad48. Back-patch to 9.5 where that came in.
Report: https://postgr.es/m/20170118144828.1432.52823@wrigleys.postgresql.org
Discussion: https://postgr.es/m/18771.1484759439@sss.pgh.pa.us
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Discussion: https://postgr.es/m/20161227172307.10135.7747@wrigleys.postgresql.org
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
This lets us use parallel aggregate for a variety of useful cases
that didn't work before, like sum(int8), sum(numeric), several
versions of avg(), and various other functions.
Add some regression tests, as well, testing the general sanity of
these and future catalog entries.
David Rowley, reviewed by Tomas Vondra, with a few further changes
by me.
interval_mul() attempts to prevent its calculations from producing silly
results, but it forgot that zero times infinity yields NaN in IEEE
arithmetic. Hence, a case like '1 second'::interval * 'infinity'::float8
produced a NaN for the months product, which didn't trigger the range
check, resulting in bogus and possibly platform-dependent output.
This isn't terribly obvious to the naked eye because if you try that
exact case, you get "interval out of range" which is what you expect
--- but if you look closer, the error is coming from interval_out not
interval_mul. interval_mul has allowed a bogus value into the system.
Fix by adding isnan tests.
Noted while testing Vitaly Burovoy's fix for infinity input to
to_timestamp(). Given the lack of field complaints, I doubt this
is worth a back-patch.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
Historically, extract() just returned zero for any case involving an
infinite timestamp[tz] input; even cases in which the unit name was
invalid. This is not very sensible. Instead, return infinity or
-infinity as appropriate when the requested field is one that is
monotonically increasing (e.g, year, epoch), or NULL when it is not
(e.g., day, hour). Also, throw the expected errors for bad unit names.
BACKWARDS INCOMPATIBLE CHANGE
Vitaly Burovoy, reviewed by Vik Fearing
Commit bda76c1c8c caused both plus and
minus infinity to be rendered as "infinity", which is not only wrong
but inconsistent with the pre-9.4 behavior of to_json(). Fix that by
duplicating the coding in date_out/timestamp_out/timestamptz_out more
closely. Per bug #13687 from Stepan Perlov. Back-patch to 9.4, like
the previous commit.
In passing, also re-pgindent json.c, since it had gotten a bit messed up by
recent patches (and I was already annoyed by indentation-related problems
in back-patching this fix ...)
Alvaro Herrera
Tom Lane
Bruce Momjian
Alexander Korotkov
Peter Eisentraut
Noah Misch
Andres Freund
Tomas Vondra
Peter Eisentraut
Robert Haas