This is for the benefit of running postgres under the rr
debugger. When using rr signal handlers running while a syscall is
active use an alternative stack. As e.g. bgworkers are started from
within signal handlers, the forked backend then has a different stack
base than postmaster. Previously that subsequently lead to those
processes triggering spurious "stack depth limit exceeded" errors.
Discussion: https://postgr.es/m/20200327182217.ubrrl32lyfhxfwk5@alap3.anarazel.de
Add a new global variable MyBackendType that uses the same BackendType
enum that was previously only used by the stats collector. That way
several duplicate ways of checking what type a particular process is
can be simplified. Since it's no longer just for stats, move to
miscinit.c and rename existing functions to match the expanded
purpose.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The init_ps_display() arguments were mostly lies by now, so to match
typical usage, just use one argument and let the caller assemble it
from multiple sources if necessary. The only user of the additional
arguments is BackendInitialize(), which was already doing string
assembly on the caller side anyway.
Remove the second argument of set_ps_display() ("force") and just
handle that in init_ps_display() internally.
BackendInitialize() also used to set the initial status as
"authentication", but that was very far from where authentication
actually happened. So now it's set to "initializing" and then
"authentication" just before the actual call to
ClientAuthentication().
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c65e5196-4f04-4ead-9353-6088c19615a3@2ndquadrant.com
The code around InitPostmasterChild() from commit 31c453165b somehow
ended up in the middle of a block of code related to "User ID state".
Move it into its own block instead.
These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
A new function EmitProcSignalBarrier() can be used to emit a global
barrier which all backends that participate in the ProcSignal
mechanism must absorb, and a new function WaitForProcSignalBarrier()
can be used to wait until all relevant backends have in fact
absorbed the barrier.
This can be used to coordinate global state changes, such as turning
checksums on while the system is running.
There's no real client of this mechanism yet, although two are
proposed, but an enum has to have at least one element, so this
includes a placeholder type (PROCSIGNAL_BARRIER_PLACEHOLDER) which
should be replaced by the first real client of this mechanism to
get committed.
Andres Freund and Robert Haas, reviewed by Daniel Gustafsson and,
in earlier versions, by Magnus Hagander.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The location of the session end hook has been chosen so as it is
possible to allow modules to do their own transactions, however any
trying to any any subsystem which went through before_shmem_exit()
would cause issues, limiting the pluggability of the hook.
Per discussion with Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/18722.1569906636@sss.pgh.pa.us
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
This approach provides a much tighter binding between a data directory
and the associated SysV shared memory block (and SysV or named-POSIX
semaphores, if we're using those). Key collisions are still possible,
but only between data directories stored on different filesystems,
so the situation should be negligible in practice. More importantly,
restarting the postmaster with a different port number no longer
risks failing to identify a relevant shared memory block, even when
postmaster.pid has been removed. A standalone backend is likewise
much more certain to detect conflicting leftover backends.
(In the longer term, we might now think about deprecating the port as
a cluster-wide value, so that one postmaster could support sockets
with varying port numbers. But that's for another day.)
The hazards fixed here apply only on Unix systems; our Windows code
paths already use identifiers derived from the data directory path
name rather than the port.
src/test/recovery/t/017_shm.pl, which intends to test key-collision
cases, has been substantially rewritten since it can no longer use
two postmasters with identical port numbers to trigger the case.
Instead, use Perl's IPC::SharedMem module to create a conflicting
shmem segment directly. The test script will be skipped if that
module is not available. (This means that some older buildfarm
members won't run it, but I don't think that that results in any
meaningful coverage loss.)
Patch by me; thanks to Noah Misch and Peter Eisentraut for discussion
and review.
Discussion: https://postgr.es/m/16908.1557521200@sss.pgh.pa.us
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20190408064141.GA2016666@rfd.leadboat.com
Previously, md.c and checkpointer.c were tightly integrated so that
fsync calls could be handed off and processed in the background.
Introduce a system of callbacks and file tags, so that other modules
can hand off fsync work in the same way.
For now only md.c uses the new interface, but other users are being
proposed. Since there may be use cases that are not strictly SMGR
implementations, use a new function table for sync handlers rather
than extending the traditional SMGR one.
Instead of using a bitmapset of segment numbers for each RelFileNode
in the checkpointer's hash table, make the segment number part of the
key. This requires sending explicit "forget" requests for every
segment individually when relations are dropped, but suits the file
layout schemes of proposed future users better (ie sparse or high
segment numbers).
Author: Shawn Debnath and Thomas Munro
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/CAEepm=2gTANm=e3ARnJT=n0h8hf88wqmaZxk0JYkxw+b21fNrw@mail.gmail.com
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20130911033341.GD225735@tornado.leadboat.com
One should almost always terminate an old process, not use a manual
removal tool like ipcrm. Removal of the ipcclean script eleven years
ago (39627b1ae6) and its non-replacement
corroborate that manual shm removal is now a niche goal. Back-patch to
9.4 (all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20180812064815.GB2301738@rfd.leadboat.com
Too allow table accesses to be not directly dependent on heap, several
new abstractions are needed. Specifically:
1) Heap scans need to be generalized into table scans. Do this by
introducing TableScanDesc, which will be the "base class" for
individual AMs. This contains the AM independent fields from
HeapScanDesc.
The previous heap_{beginscan,rescan,endscan} et al. have been
replaced with a table_ version.
There's no direct replacement for heap_getnext(), as that returned
a HeapTuple, which is undesirable for a other AMs. Instead there's
table_scan_getnextslot(). But note that heap_getnext() lives on,
it's still used widely to access catalog tables.
This is achieved by new scan_begin, scan_end, scan_rescan,
scan_getnextslot callbacks.
2) The portion of parallel scans that's shared between backends need
to be able to do so without the user doing per-AM work. To achieve
that new parallelscan_{estimate, initialize, reinitialize}
callbacks are introduced, which operate on a new
ParallelTableScanDesc, which again can be subclassed by AMs.
As it is likely that several AMs are going to be block oriented,
block oriented callbacks that can be shared between such AMs are
provided and used by heap. table_block_parallelscan_{estimate,
intiialize, reinitialize} as callbacks, and
table_block_parallelscan_{nextpage, init} for use in AMs. These
operate on a ParallelBlockTableScanDesc.
3) Index scans need to be able to access tables to return a tuple, and
there needs to be state across individual accesses to the heap to
store state like buffers. That's now handled by introducing a
sort-of-scan IndexFetchTable, which again is intended to be
subclassed by individual AMs (for heap IndexFetchHeap).
The relevant callbacks for an AM are index_fetch_{end, begin,
reset} to create the necessary state, and index_fetch_tuple to
retrieve an indexed tuple. Note that index_fetch_tuple
implementations need to be smarter than just blindly fetching the
tuples for AMs that have optimizations similar to heap's HOT - the
currently alive tuple in the update chain needs to be fetched if
appropriate.
Similar to table_scan_getnextslot(), it's undesirable to continue
to return HeapTuples. Thus index_fetch_heap (might want to rename
that later) now accepts a slot as an argument. Core code doesn't
have a lot of call sites performing index scans without going
through the systable_* API (in contrast to loads of heap_getnext
calls and working directly with HeapTuples).
Index scans now store the result of a search in
IndexScanDesc->xs_heaptid, rather than xs_ctup->t_self. As the
target is not generally a HeapTuple anymore that seems cleaner.
To be able to sensible adapt code to use the above, two further
callbacks have been introduced:
a) slot_callbacks returns a TupleTableSlotOps* suitable for creating
slots capable of holding a tuple of the AMs
type. table_slot_callbacks() and table_slot_create() are based
upon that, but have additional logic to deal with views, foreign
tables, etc.
While this change could have been done separately, nearly all the
call sites that needed to be adapted for the rest of this commit
also would have been needed to be adapted for
table_slot_callbacks(), making separation not worthwhile.
b) tuple_satisfies_snapshot checks whether the tuple in a slot is
currently visible according to a snapshot. That's required as a few
places now don't have a buffer + HeapTuple around, but a
slot (which in heap's case internally has that information).
Additionally a few infrastructure changes were needed:
I) SysScanDesc, as used by systable_{beginscan, getnext} et al. now
internally uses a slot to keep track of tuples. While
systable_getnext() still returns HeapTuples, and will so for the
foreseeable future, the index API (see 1) above) now only deals with
slots.
The remainder, and largest part, of this commit is then adjusting all
scans in postgres to use the new APIs.
Author: Andres Freund, Haribabu Kommi, Alvaro Herrera
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
This reverts commit bd09503e63.
Per discussion, it seems like what we should do instead is to
reduce the default value of autovacuum_vacuum_cost_delay by the
same factor. That's functionally equivalent as long as the
platform can accurately service the smaller delay request, which
should be true on anything released in the last 10 years or more.
And smaller, more-closely-spaced delays are better in terms of
providing a steady I/O load.
Discussion: https://postgr.es/m/28720.1552101086@sss.pgh.pa.us
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
The original 200 default value was set back in f425b605f4 when the cost
delay settings were first added. Hardware has improved quite a bit since
then and we've also made improvements such as sorting buffers during
checkpoints (9cd00c457e) which should result in less random writes.
This low default value was reportedly causing problems with badly
configured servers and in the absence of a native method to remove
excessive bloat from tables without incurring an AccessExclusiveLock, this
often made cleaning up the damage caused by badly configured auto-vacuums
difficult.
It seems more likely that someone will notice that auto-vacuum is running
too quickly than too slowly, so let's go all out and multiple the default
value for the setting by 10. With the default vacuum_cost_page_dirty and
autovacuum_vacuum_cost_delay (assuming a page size of 8192 bytes), this
allows autovacuum a theoretical maximum dirty write rate of around 39MB/s
instead of just 3.9MB/s.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_YbXC2qTMPyCbmsPiKvZYwpuQNQMohiRXLj1r=8_rYvw@mail.gmail.com
Since its introduction, max_wal_senders is counted as part of
max_connections when it comes to define how many connection slots can be
used for replication connections with a WAL sender context. This can
lead to confusion for some users, as it could be possible to block a
base backup or replication from happening because other backend sessions
are already taken for other purposes by an application, and
superuser-only connection slots are not a correct solution to handle
that case.
This commit makes max_wal_senders independent of max_connections for its
handling of PGPROC entries in ProcGlobal, meaning that connection slots
for WAL senders are handled using their own free queue, like autovacuum
workers and bgworkers.
One compatibility issue that this change creates is that a standby now
requires to have a value of max_wal_senders at least equal to its
primary. So, if a standby created enforces the value of
max_wal_senders to be lower than that, then this could break failovers.
Normally this should not be an issue though, as any settings of a
standby are inherited from its primary as postgresql.conf gets normally
copied as part of a base backup, so parameters would be consistent.
Author: Alexander Kukushkin
Reviewed-by: Kyotaro Horiguchi, Petr Jelínek, Masahiko Sawada, Oleksii
Kliukin
Discussion: https://postgr.es/m/CAFh8B=nBzHQeYAu0b8fjK-AF1X4+_p6GRtwG+cCgs6Vci2uRuQ@mail.gmail.com
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
This is the genam.h equivalent of 4c850ecec6 (which removed
heapam.h from a lot of other headers). There's still a few header
includes of genam.h, but not from central headers anymore.
As a few headers are not indirectly included anymore, execnodes.h and
relscan.h need a few additional includes. Some of the depended on
types were replacable by using the underlying structs, but e.g. for
Snapshot in execnodes.h that'd have gotten more invasive than
reasonable in this commit.
Like the aforementioned commit 4c850ecec6, this requires adding new
genam.h includes to a number of backend files, which likely is also
required in a few external projects.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Background workers, including parallel workers, were generating
the same sequence of numbers in random(). This showed up as DSM
handle collisions when Parallel Hash created multiple segments,
but any code that calls random() in background workers could be
affected if it cares about different backends generating different
numbers.
Repair by making sure that all new processes initialize the seed
at the same time as they set MyProcPid and MyStartTime in a new
function InitProcessGlobals(), called by the postmaster, its
children and also standalone processes. Also add a new high
resolution MyStartTimestamp as a potentially useful by-product,
and remove SessionStartTime from struct Port as it is now
redundant.
No back-patch for now, as the known consequences so far are just
a bunch of harmless shm_open(O_EXCL) collisions.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D2eJj_6%3DB%2B2tEpGu2nf1BjthCf9nXXUouYvJJ4C5WSwhg%40mail.gmail.com
The connection authorized message has quite a bit of useful information
in it, but didn't include the application_name (when provided), so let's
add that as it can be very useful.
Note that at the point where we're emitting the connection authorized
message, we haven't processed GUCs, so it's not possible to get this by
using log_line_prefix (which pulls from the GUC). There's also
something to be said for having this included in the connection
authorized message and then not needing to repeat it for every line, as
having it in log_line_prefix would do.
The GUC cleans the application name to pure-ascii, so do that here too,
but pull out the logic for cleaning up a string into its own function
in common and re-use it from those places, and check_cluster_name which
was doing the same thing.
Author: Don Seiler <don@seiler.us>
Discussion: https://postgr.es/m/CAHJZqBB_Pxv8HRfoh%2BAB4KxSQQuPVvtYCzMg7woNR3r7dfmopw%40mail.gmail.com
Those previously used bool, which should be safe on any modern
platforms, however the C standard is clear that it is better to use
sig_atomic_t for variables manipulated in signal handlers. This commit
adds at the same time PGDLLIMPORT to ClientConnectionLost.
Author: Michael Paquier
Reviewed-by: Tom Lane, Chris Travers, Andres Freund
Discussion: https://postgr.es/m/20180925011311.GD1354@paquier.xyz
This removes a difference between the standard IsUnderPostmaster
execution environment and that of --boot and --single. In a stand-alone
backend, "SELECT random()" always started at the same seed.
On a system capable of using posix shared memory, initdb could still
conclude "selecting dynamic shared memory implementation ... sysv".
Crashed --boot or --single postgres processes orphaned shared memory
objects having names that collided with the not-actually-random names
that initdb probed. The sysv fallback appeared after ten crashes of
--boot or --single postgres. Since --boot and --single are rare in
production use, systems used for PostgreSQL development are the
principal candidate to notice this symptom.
Back-patch to 9.3 (all supported versions). PostgreSQL 9.4 introduced
dynamic shared memory, but 9.3 does share the "SELECT random()" problem.
Reviewed by Tom Lane and Kyotaro HORIGUCHI.
Discussion: https://postgr.es/m/20180915221546.GA3159382@rfd.leadboat.com
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
Commit c37b3d08c dropped its added GetDataDirectoryCreatePerm call into
the wrong place in pg_resetwal.c, namely after the chdir to DataDir.
That broke invocations using a relative path, as reported by Tushar Ahuja.
We could have left it where it was and changed the argument to be ".",
but that'd result in a rather confusing error message in event of a
failure, so re-ordering seems like a better solution.
Similarly reorder operations in pg_rewind.c. The issue there is that
it doesn't seem like a good idea to do any actual operations before the
not-root check (on Unix) or the restricted token acquisition (on Windows).
I don't know that this is an actual bug, but I'm definitely not convinced
that it isn't, either.
Assorted other code review for c37b3d08c and da9b580d8: fix some
misspelled or otherwise badly worded comments, put the #include for
<sys/stat.h> where it actually belongs, etc.
Discussion: https://postgr.es/m/aeb9c3a7-3c3f-a57f-1a18-c8d4fcdc2a1f@enterprisedb.com
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
Vacuum of index consists from two stages: multiple (zero of more) ambulkdelete
calls and one amvacuumcleanup call. When workload on particular table
is append-only, then autovacuum isn't intended to touch this table. However,
user may run vacuum manually in order to fill visibility map and get benefits
of index-only scans. Then ambulkdelete wouldn't be called for indexes
of such table (because no heap tuples were deleted), only amvacuumcleanup would
be called In this case, amvacuumcleanup would perform full index scan for
two objectives: put recyclable pages into free space map and update index
statistics.
This patch allows btvacuumclanup to skip full index scan when two conditions
are satisfied: no pages are going to be put into free space map and index
statistics isn't stalled. In order to check first condition, we store
oldest btpo_xact in the meta-page. When it's precedes RecentGlobalXmin, then
there are some recyclable pages. In order to check second condition we store
number of heap tuples observed during previous full index scan by cleanup.
If fraction of newly inserted tuples is less than
vacuum_cleanup_index_scale_factor, then statistics isn't considered to be
stalled. vacuum_cleanup_index_scale_factor can be defined as both reloption and GUC (default).
This patch bumps B-tree meta-page version. Upgrade of meta-page is performed
"on the fly": during VACUUM meta-page is rewritten with new version. No special
handling in pg_upgrade is required.
Author: Masahiko Sawada, Alexander Korotkov
Review by: Peter Geoghegan, Kyotaro Horiguchi, Alexander Korotkov, Yura Sokolov
Discussion: https://www.postgresql.org/message-id/flat/CAD21AoAX+d2oD_nrd9O2YkpzHaFr=uQeGr9s1rKC3O4ENc568g@mail.gmail.com
We were independently checking ReservedBackends < MaxConnections and
max_wal_senders < MaxConnections, but because walsenders aren't allowed
to use superuser-reserved connections, that's really the wrong thing.
Correct behavior is to insist on ReservedBackends + max_wal_senders being
less than MaxConnections. Fix the code and associated documentation.
This has been wrong for a long time, but since the situation probably
hardly ever arises in the field (especially pre-v10, when the default
for max_wal_senders was zero), no back-patch.
Discussion: https://postgr.es/m/28271.1520195491@sss.pgh.pa.us
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Andres Freund
Peter Eisentraut
Tom Lane
Thomas Munro
Alvaro Herrera
Bruce Momjian
Michael Paquier
Robert Haas
Amit Kapila
Noah Misch
Andrew Dunstan
Stephen Frost
Magnus Hagander
Teodor Sigaev