These are required by POSIX since SUSv2, and no live platforms fail
to provide them. On Windows, utime() exists and we bring our own
<utime.h>, so we're good there too. So remove the configure probes
and ad-hoc substitute code. We don't need to check for utimes()
anymore either, since that was only used as a substitute.
In passing, make the Windows build include <sys/utime.h> only where
we need it, not everywhere.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and float.c's substitute code.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Prior to this commit, the read buffer was allocated at the time the tape
was rewound; but as an optimization, would not be allocated at all if
the tape was empty.
That optimization meant that it was valid to have a rewound tape with
the buffer set to NULL, but only if a number of conditions were met
and only if the API was used properly. After 7fdd919a refactored the
code to support lazily-allocating the buffer, Coverity started
complaining.
The optimization for empty tapes doesn't seem important, so just
allocate the buffer whether the tape has any data or not.
Discussion: https://postgr.es/m/20351.1581868306%40sss.pgh.pa.us
Commit 6bf0bc842 replaced float.c's CHECKFLOATVAL() macro with static
inline subroutines, but that wasn't too well thought out. In the original
coding, the unlikely condition (isinf(result) or result == 0) was checked
first, and the inf_is_valid or zero_is_valid condition only afterwards.
The inline-subroutine coding caused that to be swapped around, which is
pretty horrid for performance because (a) in common cases the is_valid
condition is twice as expensive to evaluate (e.g., requiring two isinf()
calls not one) and (b) in common cases the is_valid condition is false,
requiring us to perform the unlikely-condition check anyway. Net result
is that one isinf() call becomes two or three, resulting in visible
performance loss as reported by Keisuke Kuroda.
The original fix proposal was to revert the replacement of the macro,
but on second thought, that macro was just a bad idea from the beginning:
if anything it's a net negative for readability of the code. So instead,
let's just open-code all the overflow/underflow tests, being careful to
test the unlikely condition first (and mark it unlikely() to help the
compiler get the point).
Also, rather than having N copies of the actual ereport() calls, collapse
those into out-of-line error subroutines to save some code space. This
does mean that the error file/line numbers won't be very helpful for
figuring out where the issue really is --- but we'd already burned that
bridge by putting the ereports into static inlines.
In HEAD, check_float[48]_val() are gone altogether. In v12, leave them
present in float.h but unused in the core code, just in case some
extension is depending on them.
Emre Hasegeli, with some kibitzing from me and Andres Freund
Discussion: https://postgr.es/m/CANDwggLe1Gc1OrRqvPfGE=kM9K0FSfia0hbeFCEmwabhLz95AA@mail.gmail.com
Commit 147e3722f7 changed Tid scan so that it calls table_beginscan()
and uses the scan option for seq scan. This change caused two issues.
(1) The change caused Tid scan to take a predicate lock on the entire
relation in serializable transaction even when relation-level
lock is not necessary. This could lead to an unexpected
serialization error.
(2) The change caused Tid scan to increment the number of seq_scan
in pg_stat_*_tables views even though it's not seq scan. This
could confuse the users.
This commit adds the scan option for Tid scan and makes Tid scan
use it, to avoid those issues.
Back-patch to v12, where the bug was introduced.
Author: Tatsuhito Kasahara
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVKy+gTbFmB6X_UW0pP3WaeJ-fkUWHoD-pExS=at3CY76g@mail.gmail.com
This reverts commit 41aadee, as the GUC checks could run on older values
with the new values used, and result in incorrect errors if both
parameters are changed at the same time.
Per complaint from Tom Lane.
Discussion: https://postgr.es/m/27574.1581015893@sss.pgh.pa.us
Backpatch-through: 12
In certain transient states, it's possible that a table has attributes
with attgenerated set but no default expressions in pg_attrdef yet.
In that case, the old code path would not set
relation->rd_att->constr->has_generated_stored, unless
relation->rd_att->constr was also populated for some other reason.
There was probably no practical impact, but it's better to keep this
consistent.
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/20200115181105.ad6ab6dlgyww3lb6%40alap3.anarazel.de
This new field tracks the PID of the group leader used with parallel
query. For parallel workers and the leader, the value is set to the
PID of the group leader. So, for the group leader, the value is the
same as its own PID. Note that this reflects what PGPROC stores in
shared memory, so as leader_pid is NULL if a backend has never been
involved in parallel query. If the backend is using parallel query or
has used it at least once, the value is set until the backend exits.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Guillaume Lelarge, Michael Paquier, Tomas
Vondra
Discussion: https://postgr.es/m/CAOBaU_Yy5bt0vTPZ2_LUM6cUcGeqmYNoJ8-Rgto+c2+w3defYA@mail.gmail.com
Using 32 bit counters means they can now realistically wrap around when
vacuuming extremely large tables. Because they're signed integers,
stats printed by vacuum look very odd when they do.
We'd love to backpatch this, but refrain because the variables are
exported and could cause third-party code to break.
Reviewed-by: Julien Rouhaud, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/20200131205926.GA16367@alvherre.pgsql
Those new assertions can be used at file scope, outside of any function
for compilation checks. This commit provides implementations for C and
C++, and fallback implementations.
Author: Peter Smith
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Dagfinn Ilmari Mannsåker,
Michael Paquier
Discussion: https://postgr.es/m/201DD0641B056142AC8C6645EC1B5F62014B8E8030@SYD1217
Using a lookup table of digit pairs reduces the number of divisions
needed, and calculating the length upfront saves some work; these
ideas are taken from the code previously committed for floats.
David Fetter, reviewed by Kyotaro Horiguchi, Tels, and me.
Discussion: https://postgr.es/m/20190924052620.GP31596%40fetter.org
This code would accept "strinX", where X is any 1-byte character,
as meaning "string". Clearly it wasn't meant to do that.
No back-patch, since this doesn't affect correct queries and
there's some tiny chance we'd break somebody's incorrect query
in a minor release.
Report and patch by Dominik Czarnota.
Discussion: https://postgr.es/m/CABEVAa1dU0mDCAfaT8WF2adVXTDsLVJy_izotg6ze_hh-cn8qQ@mail.gmail.com
Commit fc7695891 changed CheckAttributeType to recurse into ranges,
but made it pass down the wrong collation (always InvalidOid, since
ranges as such have no collation). This would result in guaranteed
failure when considering a range type whose subtype is collatable.
Embarrassingly, we lack any regression tests that would expose such
a problem (but fortunately, somebody noticed before we shipped this
bug in any release).
Fix it to pass down the range's subtype collation property instead,
and add some regression test cases to exercise collatable-subtype
ranges a bit more. Back-patch to all supported branches, as the
previous patch was.
Report and patch by Julien Rouhaud, test cases tweaked by me
Discussion: https://postgr.es/m/CAOBaU_aBWqNweiGUFX0guzBKkcfJ8mnnyyGC_KBQmO12Mj5f_A@mail.gmail.com
When running a lot of large parallel queries concurrently, or a plan with
a lot of separate Gather nodes, it is possible to run out of DSM slots.
There are better solutions to these problems requiring architectural
redesign work, but for now, let's adjust the constants so that it's more
difficult to hit the limit.
1. Previously, a DSA area would create up to four segments at each size
before doubling the size. After this commit, it will create only two at
each size, so it ramps up faster and therefore needs fewer slots.
2. Previously, the total limit on DSM slots allowed for 2 per connection.
Switch to 5 per connection.
Also remove an obsolete nearby comment.
Author: Thomas Munro
Reviewed-by: Robert Haas, Andres Freund
Discussion: https://postre.es/m/CA%2BhUKGL6H2BpGbiF7Lj6QiTjTGyTLW_vLR%3DSn2tEBeTcYXiMKw%40mail.gmail.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
In the wake of 1f3a02173, assorted buildfarm members were warning about
"control reaches end of non-void function" or the like. Do what we've
done elsewhere: in place of a "default" switch case that will prevent
the compiler from warning about unhandled enum values, put a catchall
elog() after the switch. And return a dummy value to satisfy compilers
that don't know elog() doesn't return.
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
In non-TEXT output formats, the "Settings" field should appear when
requested, even if it would be empty.
Also, get rid of the premature optimization of counting all the
GUC_EXPLAIN variables at startup. Since there was no provision for
adjusting that count later, all it'd take would be some extension marking
a parameter as GUC_EXPLAIN to risk an assertion failure or memory stomp.
We could make get_explain_guc_options() count those variables on-the-fly,
or dynamically resize its array ... but TBH I do not think that making a
transient array of pointers a bit smaller is worth any extra complication,
especially when you consider all the other transient space EXPLAIN eats.
So just allocate that array at the max possible size.
In HEAD, also add some regression test coverage for this feature.
Because of the memory-stomp hazard, back-patch to v12 where this
feature was added.
Discussion: https://postgr.es/m/19416.1580069629@sss.pgh.pa.us
At first glance, this function seems useful, but it actually increases
the amount of code required rather than decreasing it. Inline the
logic into the callers instead; most callers don't use the 'lexeme'
argument for anything and as a result considerable simplification is
possible.
Along the way, fix the header comment for the nearby function
lex_expect(), which mislabeled it as lex_accept().
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
Keep the code that pertains to the 'json' data type in json.c, but
move the lexing and parsing code to a new file jsonapi.c, a name
I chose because the corresponding prototypes are in jsonapi.h.
This seems like a logical division, because the JSON lexer and parser
are also used by the 'jsonb' data type, but the SQL-callable functions
in json.c are a separate thing. Also, the new jsonapi.c file needs to
include far fewer header files than json.c, which seems like a good
sign that this is an appropriate place to insert an abstraction
boundary. I took the opportunity to remove a few apparently-unneeded
includes from json.c at the same time.
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan. The previous commit was, too, but I forgot to note it
in the commit message.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
I had supposed that the from_char_seq_search() call sites were
all passing the constant arrays you'd expect them to pass ...
but on looking closer, the one for DY format was passing the
days[] array not days_short[]. This accidentally worked because
the day abbreviations in English are all the same as the first
three letters of the full day names. However, once we took out
the "maximum comparison length" logic, it stopped working.
As penance for that oversight, add regression test cases covering
this, as well as every other switch case in DCH_from_char() that
was not reached according to the code coverage report.
Also, fold the DCH_RM and DCH_rm cases into one --- now that
seq_search is case independent, there's no need to pass different
comparison arrays for those cases.
Back-patch, as the previous commit was.
seq_search(), which is used to match input substrings to constants
such as month and day names, had a lot of bizarre and unnecessary
behaviors. It was mostly possible to avert our eyes from that before,
but we don't want to duplicate those behaviors in the upcoming patch
to allow recognition of non-English month and day names. So it's time
to clean this up. In particular:
* seq_search scribbled on the input string, which is a pretty dangerous
thing to do, especially in the badly underdocumented way it was done here.
Fortunately the input string is a temporary copy, but that was being made
three subroutine levels away, making it something easy to break
accidentally. The behavior is externally visible nonetheless, in the form
of odd case-folding in error reports about unrecognized month/day names.
The scribbling is evidently being done to save a few calls to pg_tolower,
but that's such a cheap function (at least for ASCII data) that it's
pretty pointless to worry about. In HEAD I switched it to be
pg_ascii_tolower to ensure it is cheap in all cases; but there are corner
cases in Turkish where this'd change behavior, so leave it as pg_tolower
in the back branches.
* seq_search insisted on knowing the case form (all-upper, all-lower,
or initcap) of the constant strings, so that it didn't have to case-fold
them to perform case-insensitive comparisons. This likewise seems like
excessive micro-optimization, given that pg_tolower is certainly very
cheap for ASCII data. It seems unsafe to assume that we know the case
form that will come out of pg_locale.c for localized month/day names, so
it's better just to define the comparison rule as "downcase all strings
before comparing". (The choice between downcasing and upcasing is
arbitrary so far as English is concerned, but it might not be in other
locales, so follow citext's lead here.)
* seq_search also had a parameter that'd cause it to report a match
after a maximum number of characters, even if the constant string were
longer than that. This was not actually used because no caller passed
a value small enough to cut off a comparison. Replicating that behavior
for localized month/day names seems expensive as well as useless, so
let's get rid of that too.
* from_char_seq_search used the maximum-length parameter to truncate
the input string in error reports about not finding a matching name.
This leads to rather confusing reports in many cases. Worse, it is
outright dangerous if the input string isn't all-ASCII, because we
risk truncating the string in the middle of a multibyte character.
That'd lead either to delivering an illegible error message to the
client, or to encoding-conversion failures that obscure the actual
data problem. Get rid of that in favor of truncating at whitespace
if any (a suggestion due to Alvaro Herrera).
In addition to fixing these things, I const-ified the input string
pointers of DCH_from_char and its subroutines, to make sure there
aren't any other scribbling-on-input problems.
The risk of generating a badly-encoded error message seems like
enough of a bug to justify back-patching, so patch all supported
branches.
Discussion: https://postgr.es/m/29432.1579731087@sss.pgh.pa.us
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
Some buildfarm members were still warning about this, because in
9c679a08f I'd missed decorating one of the ereport() code paths
with a dummy return.
Also, adjust the error messages to be more in line with project
style guide.
Ensure that ClassifyUtilityCommandAsReadOnly() has defined behavior
even if TransactionStmt.kind has a value that's not one of the
declared values for its enum.
Suppress warnings from compilers that don't know that elog(ERROR)
doesn't return, in ClassifyUtilityCommandAsReadOnly() and
jsonb_set_lax().
Per Coverity and buildfarm.
Mixing incorrect bounds set in the SSL context leads to confusing error
messages generated by OpenSSL which are hard to act on. New checks are
added within the GUC machinery to improve the user experience as they
apply to any SSL implementation, not only OpenSSL, and doing the checks
beforehand avoids the creation of a SSL during a reload (or startup)
which we know will never be used anyway.
Backpatch down to 12, as those parameters have been introduced by
e73e67c.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200114035420.GE1515@paquier.xyz
Backpatch-through: 12
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
The bitmap used by SlabCheck to cross-check free chunks in a block used
to be allocated for each SlabCheck call, and was never freed. The memory
leak could be fixed by simply adding a pfree call, but it's actually a
bad idea to do any allocations in SlabCheck at all as it assumes the
state of the memory management as a whole is sane.
So instead we allocate the bitmap as part of SlabContext, which means
we don't need to do any allocations in SlabCheck and the bitmap goes
away together with the SlabContext.
Backpatch to 10, where the Slab context was introduced.
Author: Tomas Vondra
Reported-by: Andres Freund
Reviewed-by: Tom Lane
Backpatch-through: 10
Discussion: https://www.postgresql.org/message-id/20200116044119.g45f7pmgz4jmodxj%40alap3.anarazel.de
jsonb_set_lax() is the same as jsonb_set, except that it takes and extra
argument that specifies what to do if the value argument is NULL. The
default is 'use_json_null'. Other possibilities are 'raise_exception',
'return_target' and 'delete_key', all these behaviours having been
suggested as reasonable by various users.
Discussion: https://postgr.es/m/375873e2-c957-3a8d-64f9-26c43c2b16e7@2ndQuadrant.com
Reviewed by: Pavel Stehule
Move all the backend-only code that'd crept into wchar.c and encnames.c
into mbutils.c.
To remove the last few #ifdef dependencies from wchar.c and encnames.c,
also make the following changes:
* Adjust get_encoding_name_for_icu to return NULL, not throw an error,
for unsupported encodings. Its sole caller can perfectly well throw an
error instead. (While at it, I also made this function and its sibling
is_encoding_supported_by_icu proof against out-of-range encoding IDs.)
* Remove the overlength-name error condition from pg_char_to_encoding.
It's completely silly not to treat that just like any other
the-name-is-not-in-the-table case.
Also, get rid of pg_mic_mblen --- there's no obvious reason why
conv.c shouldn't call pg_mule_mblen instead.
Other than that, this is just code movement and comment-polishing with
no functional changes. Notably, I reordered declarations in pg_wchar.h
to show which functions are frontend-accessible and which are not.
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
Formerly, various frontend directories symlinked these two sources
and then built them locally. That's an ancient, ugly hack, and
we now have a much better way: put them into libpgcommon.
So do that. (The immediate motivation for this is the prospect
of having to introduce still more symlinking if we don't.)
This commit moves these two files absolutely verbatim, for ease of
reviewing the git history. There's some follow-on work to be done
that will modify them a bit.
Robert Haas, Tom Lane
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for ANALYZE.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Co-authored-by: Tatsuro Yamada <tatsuro.yamada.tf@nttcom.co.jp>
Reviewed-by: Julien Rouhaud, Robert Haas, Anthony Nowocien, Kyotaro Horiguchi,
Vignesh C, Amit Langote
If no permanent replication slot is configured using
primary_slot_name, the walreceiver now creates and uses a temporary
replication slot. A new setting wal_receiver_create_temp_slot can be
used to disable this behavior, for example, if the remote instance is
out of replication slots.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
When estimating the selectivity of "range_var <@ range_constant" or
"range_var @> range_constant", if the upper (or respectively lower)
bound of the range_constant was above the last bin of the range_var's
histogram, the code would access uninitialized memory and potentially
crash (though it seems the probability of a crash is quite low).
Handle the endpoint cases explicitly to fix that.
While at it, be more paranoid about the possibility of getting NaN
or other silly results from the range type's subdiff function.
And improve some comments.
Ordinarily we'd probably add a regression test case demonstrating
the bug in unpatched code. But it's too hard to get it to crash
reliably because of the uninitialized-memory dependence, so skip that.
Per bug #16122 from Adam Scott. It's been broken from the beginning,
apparently, so backpatch to all supported branches.
Diagnosis by Michael Paquier, patch by Andrey Borodin and Tom Lane.
Discussion: https://postgr.es/m/16122-eb35bc248c806c15@postgresql.org
The core idea of this patch is to make the parser generate join alias
Vars (that is, ones with varno pointing to a JOIN RTE) only when the
alias Var is actually different from any raw join input, that is a type
coercion and/or COALESCE is necessary to generate the join output value.
Otherwise just generate varno/varattno pointing to the relevant join
input column.
In effect, this means that the planner's flatten_join_alias_vars()
transformation is already done in the parser, for all cases except
(a) columns that are merged by JOIN USING and are transformed in the
process, and (b) whole-row join Vars. In principle that would allow
us to skip doing flatten_join_alias_vars() in many more queries than
we do now, but we don't have quite enough infrastructure to know that
we can do so --- in particular there's no cheap way to know whether
there are any whole-row join Vars. I'm not sure if it's worth the
trouble to add a Query-level flag for that, and in any case it seems
like fit material for a separate patch. But even without skipping the
work entirely, this should make flatten_join_alias_vars() faster,
particularly where there are nested joins that it previously had to
flatten recursively.
An essential part of this change is to replace Var nodes'
varnoold/varoattno fields with varnosyn/varattnosyn, which have
considerably more tightly-defined meanings than the old fields: when
they differ from varno/varattno, they identify the Var's position in
an aliased JOIN RTE, and the join alias is what ruleutils.c should
print for the Var. This is necessary because the varno change
destroyed ruleutils.c's ability to find the JOIN RTE from the Var's
varno.
Another way in which this change broke ruleutils.c is that it's no
longer feasible to determine, from a JOIN RTE's joinaliasvars list,
which join columns correspond to which columns of the join's immediate
input relations. (If those are sub-joins, the joinaliasvars entries
may point to columns of their base relations, not the sub-joins.)
But that was a horrid mess requiring a lot of fragile assumptions
already, so let's just bite the bullet and add some more JOIN RTE
fields to make it more straightforward to figure that out. I added
two integer-List fields containing the relevant column numbers from
the left and right input rels, plus a count of how many merged columns
there are.
This patch depends on the ParseNamespaceColumn infrastructure that
I added in commit 5815696bc. The biggest bit of code change is
restructuring transformFromClauseItem's handling of JOINs so that
the ParseNamespaceColumn data is propagated upward correctly.
Other than that and the ruleutils fixes, everything pretty much
just works, though some processing is now inessential. I grabbed
two pieces of low-hanging fruit in that line:
1. In find_expr_references, we don't need to recurse into join alias
Vars anymore. There aren't any except for references to merged USING
columns, which are more properly handled when we scan the join's RTE.
This change actually fixes an edge-case issue: we will now record a
dependency on any type-coercion function present in a USING column's
joinaliasvar, even if that join column has no references in the query
text. The odds of the missing dependency causing a problem seem quite
small: you'd have to posit somebody dropping an implicit cast between
two data types, without removing the types themselves, and then having
a stored rule containing a whole-row Var for a join whose USING merge
depends on that cast. So I don't feel a great need to change this in
the back branches. But in theory this way is more correct.
2. markRTEForSelectPriv and markTargetListOrigin don't need to recurse
into join alias Vars either, because the cases they care about don't
apply to alias Vars for USING columns that are semantically distinct
from the underlying columns. This removes the only case in which
markVarForSelectPriv could be called with NULL for the RTE, so adjust
the comments to describe that hack as being strictly internal to
markRTEForSelectPriv.
catversion bump required due to changes in stored rules.
Discussion: https://postgr.es/m/7115.1577986646@sss.pgh.pa.us
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
This one-line change provoked a lot of discussion, but ultimately
the consensus seems to be that allowing a larger value might be
useful to somebody, and probably won't hurt anyone who chooses
not to take advantage of the higher maximum limit.
Vyacheslav Makarov, reviewed by many people.
Discussion: http://postgr.es/m/7b5ecc5a9991045e2f13c84e3047541d@postgrespro.ru
Use __builtin_clz() where available. Where it isn't, we can still win
a little by using the pg_leftmost_one_pos[] lookup table instead of
having a private table.
Also drop the initial right shift by ALLOC_MINBITS in favor of
subtracting ALLOC_MINBITS from the leftmost-one-pos result. This
is a win because the compiler can fold that adjustment into other
constants it'd have to add anyway, making the shift-removal free.
Also, we can explain this coding as an unrolled form of
pg_leftmost_one_pos32(), even though that's a bit ahistorical
since it long predates pg_bitutils.h.
John Naylor, with some cosmetic adjustments by me
Discussion: https://postgr.es/m/CACPNZCuNUGMxjK7WTn_=WZnRbfASDdBxmjsVf2+m9MdmeNw_sg@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
In the wake of commit 5b9312378, there's no particular reason
for this restriction (previously, it was problematic because of
the implied rowtype reference). A simple constraint on a whole-row
Var probably isn't that useful, but conceivably somebody would want
to pass one to a function that extracts a partitioning key. Besides
which, we're expending much more code to enforce the restriction than
we save by having it, since the latter quantity is now zero.
So drop the restriction.
Amit Langote
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Formerly the rd_partkey and rd_partdesc data structures were always
populated immediately when a relcache entry was built or rebuilt.
This patch changes things so that they are populated only when they
are first requested. (Hence, callers *must* now always use
RelationGetPartitionKey or RelationGetPartitionDesc; just fetching
the pointer directly is no longer acceptable.)
This seems to have some performance benefits, but the main reason to do
it is that it eliminates a recursive-reload failure that occurs if the
partkey or partdesc expressions contain any references to the relation's
rowtype (as discovered by Amit Langote). In retrospect, since loading
these data structures might result in execution of nearly-arbitrary code
via eval_const_expressions, it was a dumb idea to require that to happen
during relcache entry rebuild.
Also, fix things so that old copies of a relcache partition descriptor
will be dropped when the cache entry's refcount goes to zero. In the
previous coding it was possible for such copies to survive for the
lifetime of the session, as I'd complained of in a previous discussion.
(This management technique still isn't perfect, but it's better than
before.) Improve the commentary explaining how that works and why
it's safe to hand out direct pointers to these relcache substructures.
In passing, improve RelationBuildPartitionDesc by using the same
memory-context-parent-swap approach used by RelationBuildPartitionKey,
thereby making it less dependent on strong assumptions about what
partition_bounds_copy does. Avoid doing get_rel_relkind in the
critical section, too.
Patch by Amit Langote and Tom Lane; Robert Haas deserves some credit
for prior work in the area, too. Although this is a pre-existing
problem, no back-patch: the patch seems too invasive to be safe to
back-patch, and the bug it fixes is a corner case that seems
relatively unlikely to cause problems in the field.
Discussion: https://postgr.es/m/CA+HiwqFUzjfj9HEsJtYWcr1SgQ_=iCAvQ=O2Sx6aQxoDu4OiHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoY3bRmGB6-DUnoVy5fJoreiBJ43rwMrQRCdPXuKt4Ykaw@mail.gmail.com
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
A new function EmitProcSignalBarrier() can be used to emit a global
barrier which all backends that participate in the ProcSignal
mechanism must absorb, and a new function WaitForProcSignalBarrier()
can be used to wait until all relevant backends have in fact
absorbed the barrier.
This can be used to coordinate global state changes, such as turning
checksums on while the system is running.
There's no real client of this mechanism yet, although two are
proposed, but an enum has to have at least one element, so this
includes a placeholder type (PROCSIGNAL_BARRIER_PLACEHOLDER) which
should be replaced by the first real client of this mechanism to
get committed.
Andres Freund and Robert Haas, reviewed by Daniel Gustafsson and,
in earlier versions, by Magnus Hagander.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
Where possible, share signal handler code and main loop interrupt
checking. This saves quite a bit of code and should simplify
maintenance, too.
This commit intends not to change the way anything works, even
though that might allow more code to be unified. It does unify
a bunch of individual variables into a ShutdownRequestPending
flag that has is now used by a bunch of different process types,
though.
Patch by me, reviewed by Andres Freund and Daniel Gustafsson.
Discussion: http://postgr.es/m/CA+TgmoZwDk=BguVDVa+qdA6SBKef=PKbaKDQALTC_9qoz1mJqg@mail.gmail.com
The DTK_DOW/DTK_ISODOW and DTK_DOY switch cases in timestamp_part() and
timestamptz_part() contained calls of timestamp2tm() that were fully
redundant with the ones done just above the switch. This evidently crept
in during commit 258ee1b63, which relocated that code from another place
where the calls were indeed needed. Just delete the redundant calls.
I (tgl) noted that our test coverage of these functions left quite a
bit to be desired, so extend timestamp.sql and timestamptz.sql to
cover all the branches.
Back-patch to all supported branches, as the previous commit was.
There's no real issue here other than some wasted cycles in some
not-too-heavily-used code paths, but the test coverage seems valuable.
Report and patch by Li Japin; test case adjustments by me.
Discussion: https://postgr.es/m/SG2PR06MB37762CAE45DB0F6CA7001EA9B6550@SG2PR06MB3776.apcprd06.prod.outlook.com
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
This makes such log entries more useful, since the cause of the error
can be dependent on the parameter values.
Author: Alexey Bashtanov, Álvaro Herrera
Discussion: https://postgr.es/m/0146a67b-a22a-0519-9082-bc29756b93a2@imap.cc
Reviewed-by: Peter Eisentraut, Andres Freund, Tom Lane
gcc-7 used with a sufficient optimization level complains about warnings
around do_to_timestamp() regarding the initialization and handling of
some of its variables. Recent commits 66c74f8 and d589f94 made things
made the interface more confusing, so document which variables are
always expected and initialize properly the optional ones when they are
set.
Author: Andrey Lepikhov, Michael Paquier
Discussion: https://postgr.es/m/a7e28b83-27b1-4e1c-c76b-4268c4b785bc@postgrespro.ru
This provides a mechanism to emit literal values in informative
messages, such as query parameters. The new code is more complex than
what it replaces, primarily because it wants to be more efficient.
It also has the (currently unused) additional optional capability of
specifying a maximum size to print.
The new function lives out of common/stringinfo.c so that frontend users
of that file need not pull in unnecessary multibyte-encoding support
code.
Author: Álvaro Herrera and Alexey Bashtanov, after a suggestion from Andres Freund
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190920203905.xkv5udsd5dxfs6tr@alap3.anarazel.de
Change default of ssl_min_protocol_version to TLSv1.2 (from TLSv1,
which means 1.0). Older versions are still supported, just not by
default.
TLS 1.0 is widely deprecated, and TLS 1.1 only slightly less so. All
OpenSSL versions that support TLS 1.1 also support TLS 1.2, so there
would be very little reason to, say, set the default to TLS 1.1
instead on grounds of better compatibility.
The test suite overrides this new setting, so it can still run with
older OpenSSL versions.
Discussion: https://www.postgresql.org/message-id/flat/b327f8df-da98-054d-0cc5-b76a857cfed9%402ndquadrant.com
This provides for cheaper mapping of child columns back to parent
columns. The one existing use-case in examine_simple_variable()
would hardly justify this by itself; but an upcoming bug fix will
make use of this array in a mainstream code path, and it seems
likely that we'll find other uses for it as we continue to build
out the partitioning infrastructure.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
We implement ON COMMIT DELETE ROWS by truncating tables marked that
way, which requires also truncating/rebuilding their indexes. But
RelationTruncateIndexes asks the relcache for up-to-date copies of any
index expressions, which may cause execution of eval_const_expressions
on them, which can result in actual execution of subexpressions.
This is a bad thing to have happening during ON COMMIT. Manuel Rigger
reported that use of a SQL function resulted in crashes due to
expectations that ActiveSnapshot would be set, which it isn't.
The most obvious fix perhaps would be to push a snapshot during
PreCommit_on_commit_actions, but I think that would just open the door
to more problems: CommitTransaction explicitly expects that no
user-defined code can be running at this point.
Fortunately, since we know that no tuples exist to be indexed, there
seems no need to use the real index expressions or predicates during
RelationTruncateIndexes. We can set up dummy index expressions
instead (we do need something that will expose the right data type,
as there are places that build index tupdescs based on this), and
just ignore predicates and exclusion constraints.
In a green field it'd likely be better to reimplement ON COMMIT DELETE
ROWS using the same "init fork" infrastructure used for unlogged
relations. That seems impractical without catalog changes though,
and even without that it'd be too big a change to back-patch.
So for now do it like this.
Per private report from Manuel Rigger. This has been broken forever,
so back-patch to all supported branches.
Make allow_system_table_mods settable at run time by superusers. It
was previously postmaster start only.
We don't want to make system catalog DDL wide-open, but there are
occasionally useful things to do like setting reloptions or statistics
on a busy system table, and blocking those doesn't help anyone. Also,
this enables the possibility of writing a test suite for this setting.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8b00ea5e-28a7-88ba-e848-21528b632354%402ndquadrant.com
The fix for CVE-2017-7484 disallowed use of pg_statistic data for
planning purposes if the user would not be able to select the associated
column and a non-leakproof function is to be applied to the statistics
values. That turns out to disable use of pg_statistic data in some
common cases involving inheritance/partitioning, where the user does
have permission to select from the parent table that was actually named
in the query, but not from a child table whose stats are needed. Since,
in non-corner cases, the user *can* select the child table's data via
the parent, this restriction is not actually useful from a security
standpoint. Improve the logic so that we also check the permissions of
the originally-named table, and allow access if select permission exists
for that.
When checking access to stats for a simple child column, we can map
the child column number back to the parent, and perform this test
exactly (including not allowing access if the child column isn't
exposed by the parent). For expression indexes, the current logic
just insists on whole-table select access, and this patch allows
access if the user can select the whole parent table. In principle,
if the child table has extra columns, this might allow access to
stats on columns the user can't read. In practice, it's unlikely
that the planner is going to do any stats calculations involving
expressions that are not visible to the query, so we'll ignore that
fine point for now. Perhaps someday we'll improve that logic to
detect exactly which columns are used by an expression index ...
but today is not that day.
Back-patch to v11. The issue was created in 9.2 and up by the
CVE-2017-7484 fix, but this patch depends on the append_rel_array[]
planner data structure which only exists in v11 and up. In
practice the issue is most urgent with partitioned tables, so
fixing v11 and later should satisfy much of the practical need.
Dilip Kumar and Amit Langote, with some kibitzing by me
Discussion: https://postgr.es/m/3876.1531261875@sss.pgh.pa.us
While a self-referential view doesn't actually work, it's possible
to create one, and it turns out that this breaks some of the
information_schema views. Those views call relation_is_updatable(),
which neglected to consider the hazards of being recursive. In
older PG versions you get a "stack depth limit exceeded" error,
but since v10 it'd recurse to the point of stack overrun and crash,
because commit a4c35ea1c took out the expression_returns_set() call
that was incidentally checking the stack depth.
Since this function is only used by information_schema views, it
seems like it'd be better to return "not updatable" than suffer
an error. Hence, add tracking of what views we're examining,
in just the same way that the nearby fireRIRrules() code detects
self-referential views. I added a check_stack_depth() call too,
just to be defensive.
Per private report from Manuel Rigger. Back-patch to all
supported versions.
Trying to use hypothetical indexes with BRIN currently fails when trying
to access a relation that does not exist when looking for the
statistics. With the current API, it is not possible to easily pass
a value for pages_per_range down to the hypothetical index, so this
makes use of the default value of BRIN_DEFAULT_PAGES_PER_RANGE, which
should be fine enough in most cases.
Being able to refine or enforce the hypothetical costs in more
optimistic ways would require more refactoring by filling in the
statistics when building IndexOptInfo in plancat.c. This would involve
ABI breakages around the costing routines, something not fit for stable
branches.
This is broken since 7e534ad, so backpatch down to v10.
Author: Julien Rouhaud, Heikki Linnakangas
Reviewed-by: Álvaro Herrera, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_ZH0LKEA8VFCocr6Lpte1ab0b6FpvgS0y4way+RPSXfYg@mail.gmail.com
Backpatch-through: 10
Make patternsel_common() select the comparison operators to use with
hardwired logic that matches pattern_prefix()'s new logic, eliminating
its dependencies on particular index opfamilies.
This shouldn't change any behavior, as it's just replacing runtime
operator lookups with the same values hard-wired. But it makes these
closely-related functions look more alike, and saving some runtime
syscache lookups is worth something.
Actually, it's not quite true that this is zero behavioral change:
when estimating for a column of type "name", the comparison constant
will be kept as "text" not coerced to "name". But that's more correct
anyway, and it allows additional simplification of the coercion logic,
again syncing this more closely with pattern_prefix().
Per consideration of a report from Manuel Rigger.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
Historically, the planner's LIKE/regex index optimizations were only
carried out for specific index opfamilies. That's never been a great
idea from the standpoint of extensibility, but it didn't matter so
much as long as we had no practical way to extend such behaviors anyway.
With the addition of planner support functions, and in view of ongoing
work to support additional table and index AMs, it seems like a good
time to relax this.
Hence, recast the decisions in match_pattern_prefix() so that rather
than decide which operators to generate by looking at what the index
opfamily contains, we decide which operators to generate a-priori
and then see if the opfamily supports them. This is much more
defensible from a semantic standpoint anyway, since we know the
semantics of the chosen operators precisely, and we only need to
assume that the opfamily correctly implements operators it claims
to support.
The existing "pattern" opfamilies put a crimp in this approach, since
we need to select the pattern operators if we want those to work.
So we still have to special-case those opfamilies. But that seems
all right, since in view of the addition of collations, the pattern
opfamilies seem like a legacy hack that nobody will be building on.
The only immediate effect of this change, so far as the core code is
concerned, is that anchored LIKE/regex patterns can be mapped onto
BRIN index searches, and exact-match patterns can be mapped onto hash
indexes, not only btree and spgist indexes as before. That's not a
terribly exciting result, but it does fix an omission mentioned in
the ancient comments here.
Note: no catversion bump, even though this touches pg_operator.dat,
because it's only adding OID macros not changing the contents of
postgres.bki.
Per consideration of a report from Manuel Rigger.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
The planner's optimization code for LIKE and regex operators could
error out with a complaint like "no = operator for opfamily NNN"
if someone created a binary-compatible index (for example, a
bpchar_ops index on a text column) on the LIKE's left argument.
This is a consequence of careless refactoring in commit 74dfe58a5.
The old code in match_special_index_operator only accepted specific
combinations of the pattern operator and the index opclass, thereby
indirectly guaranteeing that the opclass would have a comparison
operator with the same LHS input type as the pattern operator.
While moving the logic out to a planner support function, I simplified
that test in a way that no longer guarantees that. Really though we'd
like an altogether weaker dependency on the opclass, so rather than
put back exactly the old code, just allow lookup failure. I have in
mind now to rewrite this logic completely, but this is the minimum
change needed to fix the bug in v12.
Per report from Manuel Rigger. Back-patch to v12 where the mistake
came in.
Discussion: https://postgr.es/m/CA+u7OA7nnGYy8rY0vdTe811NuA+Frr9nbcBO9u2Z+JxqNaud+g@mail.gmail.com
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
It turns out that commit e9f1c01b7 missed a case: we must print a
VALUES clause in long format if get_query_def is given a resultDesc
that would require the query's output column name(s) to be different
from what the bare VALUES clause would produce.
This applies in case an ALTER ... RENAME COLUMN has been done to
a view that formerly could be printed in simple format, as shown
in the added regression test case. It also explains bug #16119
from Dmitry Telpt, because it turns out that (unlike CREATE VIEW)
CREATE MATERIALIZED VIEW fails to apply any column aliases it's
given to the stored ON SELECT rule. So to get them to be printed,
we have to account for the resultDesc renaming. It might be worth
changing the matview code so that it creates the ON SELECT rule
with the correct aliases; but we'd still need these messy checks in
get_simple_values_rte to handle the case of a subsequent column
rename, so any such change would be just neatnik-ism not a bug fix.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/16119-e64823f30a45a754@postgresql.org
When estimating number of distinct groups, we failed to ignore system
attributes when matching the group expressions to mvdistinct stats,
causing failures like
ERROR: negative bitmapset member not allowed
Fix that by simply skipping anything that is not a regular attribute.
Backpatch to PostgreSQL 10, where the extended stats were introduced.
Bug: #16111
Reported-by: Tuomas Leikola
Author: Tomas Vondra
Backpatch-through: 10
Discussion: https://postgr.es/m/16111-687799584c3a7e73@postgresql.org
We should throw an error for indeterminate collation, but bpcharne()
was missing that logic, resulting in a much less user-friendly error
(either an assertion failure or "cache lookup failed for collation 0").
Per report from Manuel Rigger. Back-patch to v12 where the mistake
came in, evidently in commit 5e1963fb7. (Before non-deterministic
collations, this function wasn't collation sensitive.)
Discussion: https://postgr.es/m/CA+u7OA4HOjtymxAbuGNh4-X_2R0Lw5n01tzvP8E5-i-2gQXYWA@mail.gmail.com
Bring datum_image_eq() in line with datumIsEqual() by adding support for
comparing cstring datums.
An upcoming patch that adds deduplication to the nbtree AM will use
datum_image_eq(). datum_image_eq() will need to work with all datatypes
that can be used as the storage type of a B-Tree index column, including
cstring. (cstring is used as the storage type for columns of type
"name" as a space-saving optimization.)
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
This completes the task begun in commit 1408d5d86, to synchronize
ECPG's exported definitions with the definition of bool used by
c.h (and, therefore, the one actually in use in the ECPG library).
On practically all modern platforms, ecpglib.h will now just
include <stdbool.h>, which should surprise nobody anymore.
That removes a header-inclusion-order hazard for ECPG clients,
who previously might get build failures or unexpected behavior
depending on whether they'd included <stdbool.h> themselves,
and if so, whether before or after ecpglib.h.
On platforms where sizeof(_Bool) is not 1 (only old PPC-based
Mac systems, as far as I know), things are still messy, as
inclusion of <stdbool.h> could still break ECPG client code.
There doesn't seem to be any clean fix for that, and given the
probably-negligible population of users who would care anymore,
it's not clear we should go far out of our way to cope with it.
This change at least fixes some header-inclusion-order hazards
for our own code, since c.h and ecpglib.h previously disagreed
on whether bool should be char or unsigned char.
To implement this with minimal invasion of ECPG client namespace,
move the choice of whether to rely on <stdbool.h> into configure,
and have it export a configuration symbol PG_USE_STDBOOL.
ecpglib.h no longer exports definitions for TRUE and FALSE,
only their lowercase brethren. We could undo that if we get
push-back about it.
Ideally we'd back-patch this as far as v11, which is where c.h
started to rely on <stdbool.h>. But the odds of creating problems
for formerly-working ECPG client code seem about as large as the
odds of fixing any non-working cases, so we'll just do this in HEAD.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
Add some support for automatically showing backtraces in certain error
situations in the server. Backtraces are shown on assertion failure;
also, a new setting backtrace_functions can be set to a list of C
function names, and all ereport()s and elog()s from the mentioned
functions will have backtraces generated. Finally, the function
errbacktrace() can be manually added to an ereport() call to generate a
backtrace for that call.
Authors: Peter Eisentraut, Álvaro Herrera
Discussion: https://postgr.es/m//5f48cb47-bf1e-05b6-7aae-3bf2cd01586d@2ndquadrant.com
Discussion: https://postgr.es/m/CAMsr+YGL+yfWE=JvbUbnpWtrRZNey7hJ07+zT4bYJdVp4Szdrg@mail.gmail.com
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
SPI gets used to build a list of relation OIDs for XML object
generation, and one code path building a list uses SPI_execute() without
looking at errors it produces. So fix that.
Author: Mark Dilger
Reviewed-by: Michael Paquier, Pavel Stehule
Discussion: https://postgr.es/m/17d30445-4862-7917-170f-84328dcd292d@gmail.com
This allows logging a sample of statements, without incurring excessive
log traffic (which may impact performance). This can be useful when
analyzing workloads with lots of short queries.
The sampling is configured using two new GUC parameters:
* log_min_duration_sample - minimum required statement duration
* log_statement_sample_rate - sample rate (0.0 - 1.0)
Only statements with duration exceeding log_min_duration_sample are
considered for sampling. To enable sampling, both those GUCs have to
be set correctly.
The existing log_min_duration_statement GUC has a higher priority, i.e.
statements with duration exceeding log_min_duration_statement will be
always logged, irrespectedly of how the sampling is configured. This
means only configurations
log_min_duration_sample < log_min_duration_statement
do actually sample the statements, instead of logging everything.
Author: Adrien Nayrat
Reviewed-by: David Rowley, Vik Fearing, Tomas Vondra
Discussion: https://postgr.es/m/bbe0a1a8-a8f7-3be2-155a-888e661cc06c@anayrat.info
Since commit d26a810eb, we've defined bool as being either _Bool from
<stdbool.h>, or "unsigned char"; but that commit overlooked the fact
that probes.d has "#define bool char". For consistency, make it say
"unsigned char" instead. This should be strictly a cosmetic change,
but it seems best to be in sync.
Formally, in the now-normal case where we're using <stdbool.h>, it'd
be better to write "#define bool _Bool". However, then we'd need
some build infrastructure to inject that configuration choice into
probes.d, and it doesn't seem worth the trouble. We only use
<stdbool.h> if sizeof(_Bool) is 1, so having DTrace think that
bool parameters are "unsigned char" should be close enough.
Back-patch to v12 where d26a810eb came in.
Discussion: https://postgr.es/m/CAA4eK1LmaKO7Du9M9Lo=kxGU8sB6aL8fa3sF6z6d5yYYVe3BuQ@mail.gmail.com
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Rearrange the logic in record_image_cmp() and datum_image_eq() to
error out on unexpected typlens (either not supported there or
completely invalid due to corruption). Barring corruption, this is
not possible today but it seems more future-proof and robust to fix
this.
Reported-by: Peter Geoghegan <pg@bowt.ie>
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
Teach get_expr_result_type() to manufacture a tuple descriptor directly
from a RowExpr node. If the RowExpr has type RECORD, this is the only
way to get a tupdesc for its result, since even if the rowtype has been
blessed, we don't have its typmod available at this point. (If the
RowExpr has some named composite type, we continue to let the existing
code handle it, since the RowExpr might well not have the correct column
names embedded in it.)
This fixes assorted corner cases illustrated by the added regression
tests.
Discussion: https://postgr.es/m/10872.1572202006@sss.pgh.pa.us
Commit 9556aa01c rearranged the innards of text_position() in a way
that would make it not work for empty search strings. Which is fine,
because all callers of that code special-case an empty pattern in
some way. However, the primary use-case (text_position itself) got
special-cased incorrectly: historically it's returned 1 not 0 for
an empty search string. Restore the historical behavior.
Per complaint from Austin Drenski (via Shay Rojansky).
Back-patch to v12 where it got broken.
Discussion: https://postgr.es/m/CADT4RqAz7oN4vkPir86Kg1_mQBmBxCp-L_=9vRpgSNPJf0KRkw@mail.gmail.com
Commit f8e5f156b added private state in postgres.c to track whether
a statement timeout is running. This seems like bad design to me;
timeout.c's private state should be the single source of truth about
that. We already fixed one bug associated with failure to keep those
states in sync (cf. be42015fc), and I've got little faith that we
won't find more in future. So get rid of postgres.c's local variable
by exposing a way to ask timeout.c whether a timeout is running.
(Obviously, such an inquiry is subject to race conditions, but it
seems fine for the purpose at hand.)
To make get_timeout_active() as cheap as possible, add a flag in
the per-timeout struct showing whether that timeout is active.
This allows some small savings elsewhere in timeout.c, mainly
elimination of unnecessary searches of the active_timeouts array.
While at it, fix enable_statement_timeout to not call disable_timeout
when statement_timeout is 0 and the timeout is not running. This
avoids a useless deschedule-and-reschedule-timeouts cycle, which
represents a significant savings (at least one kernel call) when
there is any other active timeout. Right now, there usually isn't,
but there are proposals around to change that.
Discussion: https://postgr.es/m/16035-456e6e69ebfd4374@postgresql.org
While casting from timestamp to timestamptz we do timestamp2tm() then
tm2timestamp(). This commit eliminates call to tm2timestamp(). Instead, it
directly applies timezone offset to the original timestamp value. That makes
upcoming datetime overflow handling in jsonpath easier. That should also save
us some CPU cycles.
Discussion: https://postgr.es/m/CAPpHfdvRPRh_mTGar5WmDeRZ%3DU5dOXHdxspYYD%3D76m3knNGjXA%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Tom Lane
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
Since the introduction of different slot types, in 1a0586de36, we
create a virtual slot in tuplesort_begin_cluster(). While that looks
right, it unfortunately doesn't actually work, as ExecStoreHeapTuple()
is used to store tuples in the slot. Unfortunately no regression tests
for CLUSTER on expression indexes existed so far.
Fix the slot type, and add bare bones tests for CLUSTER on expression
indexes.
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20191011210320.GS10470@telsasoft.com
Backpatch: 12, like 1a0586de36
As of d9dd406fe2, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The old names for the attribute-detoasting functions names included
the word "heap," which seems outdated now that the heap is only one of
potentially many table access methods.
On the other hand, toast_insert_or_update and toast_delete are
heap-specific, so rename them by adding "heap_" as a prefix.
Not all of the work of making the TOAST system fully accessible to AMs
other than the heap is done yet, but there seems to be little harm in
getting this renaming out of the way now. Commit
8b94dab066 already divided up the
functions among various files partially according to whether it was
intended that they should be heap-specific or AM-agnostic, so this is
just clarifying the division contemplated by that commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Commit 5ac0d9360 failed to entirely fix bitshiftright's habit of
leaving one-bits in the pad space that should be all zeroes,
because in a moment of sheer brain fade I'd concluded that only
the code path used for not-a-multiple-of-8 shift distances needed
to be fixed. Of course, a multiple-of-8 shift distance can also
cause the problem, so we need to forcibly zero the extra bits
in both cases.
Per bug #16037 from Alexander Lakhin. As before, back-patch to all
supported branches.
Discussion: https://postgr.es/m/16037-1d1ebca564db54f4@postgresql.org
Commit 5dd7fc1519 added block-level memory accounting, but used int64 variable to
track the amount of allocated memory. That is incorrect, because we have Size for
exactly these purposes, but it was mostly harmless until c477f3e449 which changed
how we handle with repalloc() when downsizing the chunk. Previously we've ignored
these cases and just kept using the original chunk, but now we need to update the
accounting, and the code was doing this:
context->mem_allocated += blksize - oldblksize;
Both blksize and oldblksize are Size (so unsigned) which means the subtraction
underflows, producing a very high positive value. On 64-bit platforms (where Size
has the same size as mem_alllocated) this happens to work because the result wraps
to the right value, but on (some) 32-bit platforms this fails.
This fixes two things - it changes mem_allocated (and related variables) to Size,
and it splits the update to two separate steps, to prevent any underflows.
Discussion: https://www.postgresql.org/message-id/15151.1570163761%40sss.pgh.pa.us
Encoding conversion uses the very simplistic rule that the output
can't be more than 4X longer than the input, and palloc's a buffer
of that size. This results in failure to convert any string longer
than 1/4 GB, which is becoming an annoying limitation.
As a band-aid to improve matters, allow the allocated output buffer
size to exceed 1GB. We still insist that the final result fit into
MaxAllocSize (1GB), though. Perhaps it'd be safe to relax that
restriction, but it'd require close analysis of all callers, which
is daunting (not least because external modules might call these
functions). For the moment, this should allow a 2X to 4X improvement
in the longest string we can convert, which is a useful gain in
return for quite a simple patch.
Also, once we have successfully converted a long string, repalloc
the output down to the actual string length, returning the excess
to the malloc pool. This seems worth doing since we can usually
expect to give back several MB if we take this path at all.
This still leaves much to be desired, most notably that the assumption
that MAX_CONVERSION_GROWTH == 4 is very fragile, and yet we have no
guard code verifying that the output buffer isn't overrun. Fixing
that would require significant changes in the encoding conversion
APIs, so it'll have to wait for some other day.
The present patch seems safely back-patchable, so patch all supported
branches.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20190816181418.GA898@alvherre.pgsql
Discussion: https://postgr.es/m/3614.1569359690@sss.pgh.pa.us
Up to now, if you resized a large (>8K) palloc chunk down to a smaller
size, aset.c made no attempt to return any space to the malloc pool.
That's unpleasant if a really large allocation is resized to a
significantly smaller size. I think no such cases existed when this
code was designed, and I'm not sure whether they're common even yet,
but an upcoming fix to encoding conversion will certainly create such
cases. Therefore, fix AllocSetRealloc so that it gives realloc()
a chance to do something with the block. This doesn't noticeably
increase complexity, we mostly just have to change the order in which
the cases are considered.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20190816181418.GA898@alvherre.pgsql
Discussion: https://postgr.es/m/3614.1569359690@sss.pgh.pa.us
The location of the session end hook has been chosen so as it is
possible to allow modules to do their own transactions, however any
trying to any any subsystem which went through before_shmem_exit()
would cause issues, limiting the pluggability of the hook.
Per discussion with Tom Lane and Andres Freund.
Discussion: https://postgr.es/m/18722.1569906636@sss.pgh.pa.us
These hooks can be used in loadable modules. A simple test module is
included.
The first attempt was done with cd8ce3a but we lacked handling for
NO_INSTALLCHECK in the MSVC scripts (problem solved afterwards by
431f1599) so the buildfarm got angry. This also fixes a couple of
issues noticed upon review compared to the first attempt, so the code
has slightly changed, resulting in a more simple test module.
Author: Fabrízio de Royes Mello, Yugo Nagata
Reviewed-by: Andrew Dunstan, Michael Paquier, Aleksandr Parfenov
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Discussion: https://postgr.es/m/20190823042602.GB5275@paquier.xyz
Adds accounting of memory allocated in a memory context. Compared to
various ad hoc solutions, the main advantage is that the accounting is
transparent and does not require direct control over allocations (this
matters for use cases where the allocations happen in user code, like
for example aggregate states allocated in a transition functions).
To reduce overhead, the accounting happens at the block level (not for
individual chunks) and only the context immediately owning the block is
updated. When inquiring about amount of memory allocated in a context,
we have to recursively walk all children contexts.
This "lazy" accounting works well for cases with relatively small number
of contexts in the relevant subtree and/or with infrequent inquiries.
Author: Jeff Davis
Reivewed-by: Tomas Vondra, Melanie Plageman, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/flat/027a129b8525601c6a680d27ce3a7172dab61aab.camel@j-davis.com
For some reason at least gcc-9 warns about the fallthrough, even
though it otherwise recognizes that elog(ERROR, ...) doesn't return.
Author: Andres Freund
This commit implements jsonpath .datetime() method as it's specified in
SQL/JSON standard. There are no-argument and single-argument versions of
this method. No-argument version selects first of ISO datetime formats
matching input string. Single-argument version accepts template string as
its argument.
Additionally to .datetime() method itself this commit also implements
comparison ability of resulting date and time values. There is some difficulty
because exising jsonb_path_*() functions are immutable, while comparison of
timezoned and non-timezoned types involves current timezone. At first, current
timezone could be changes in session. Moreover, timezones themselves are not
immutable and could be updated. This is why we let existing immutable functions
throw errors on such non-immutable comparison. In the same time this commit
provides jsonb_path_*_tz() functions which are stable and support operations
involving timezones. As new functions are added to the system catalog,
catversion is bumped.
Support of .datetime() method was the only blocker prevents T832 from being
marked as supported. sql_features.txt is updated correspondingly.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me. Comments were adjusted by Liudmila Mantrova.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov, Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL/JSON standard allows manipulation with datetime values. So, it appears to
be convinient to allow datetime values to be represented in JsonbValue struct.
These datetime values are allowed for temporary representation only. During
serialization datetime values are converted into strings.
SQL/JSON requires writing timestamps with timezone in the same timezone offset
as they were parsed. This is why we allow storage of timezone offset in
JsonbValue struct. For the same reason timezone offset argument is added to
JsonEncodeDateTime() function.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Revised by me. Comments were adjusted by Liudmila Mantrova.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov, Liudmila Mantrova
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
Add support of error suppression in some date and time manipulation functions
as it's required for jsonpath .datetime() method support. This commit doesn't
use PG_TRY()/PG_CATCH() in order to implement that. Instead, it provides
internal versions of date and time functions used, which support error
suppression.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov, Nikita Glukhov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
This commit adds parse_datetime() function, which implements datetime
parsing with extended features demanded by upcoming jsonpath .datetime()
method:
* Dynamic type identification based on template string,
* Support for standard-conforming 'strict' mode,
* Timezone offset is returned as separate value.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL Standard 2016 defines rules for handling separators in datetime template
strings, which are different to to_date()/to_timestamp() rules. Standard
allows only small set of separators and requires strict matching for them.
Standard applies to jsonpath .datetime() method and CAST (... FORMAT ...) SQL
clause. We're not going to change handling of separators in existing
to_date()/to_timestamp() functions, because their current behavior is familiar
for users. Standard behavior now available by special flag, which will be used
in upcoming .datetime() jsonpath method.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Alexander Korotkov
If the bitstring length is not a multiple of 8, we'd shift the
rightmost bits into the pad space, which must be zeroes --- bit_cmp,
for one, depends on that. This'd lead to the result failing to
compare equal to what it should compare equal to, as reported in
bug #16013 from Daryl Waycott.
This is, if memory serves, not the first such bug in the bitstring
functions. In hopes of making it the last one, do a bit more work
than minimally necessary to fix the bug:
* Add assertion checks to bit_out() and varbit_out() to complain if
they are given incorrectly-padded input. This will improve the
odds that manual testing of any new patch finds problems.
* Encapsulate the padding-related logic in macros to make it
easier to use.
Also, remove unnecessary padding logic from bit_or() and bitxor().
Somebody had already noted that we need not re-pad the result of
bit_and() since the inputs are required to be the same length,
but failed to extrapolate that to the other two.
Also, move a comment block that once was near the head of varbit.c
(but people kept putting other stuff in front of it), to put it in
the header block.
Note for the release notes: if anyone has inconsistent data as a
result of saving the output of bitshiftright() in a table, it's
possible to fix it with something like
UPDATE mytab SET bitcol = ~(~bitcol) WHERE bitcol != ~(~bitcol);
This has been broken since day one, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/16013-c2765b6996aacae9@postgresql.org
Since we introduced the idea of leakproof functions, texteq and textne
were marked leakproof but their sibling text comparison functions were
not. This inconsistency seemed justified because texteq/textne just
relied on memcmp() and so could easily be seen to be leakproof, while
the other comparison functions are far more complex and indeed can
throw input-dependent errors.
However, that argument crashed and burned with the addition of
nondeterministic collations, because now texteq/textne may invoke
the exact same varstr_cmp() infrastructure as the rest. It makes no
sense whatever to give them different leakproofness markings.
After a certain amount of angst we've concluded that it's all right
to consider varstr_cmp() to be leakproof, mostly because the other
choice would be disastrous for performance of many queries where
leakproofness matters. The input-dependent errors should only be
reachable for corrupt input data, or so we hope anyway; certainly,
if they are reachable in practice, we've got problems with requirements
as basic as maintaining a btree index on a text column.
Hence, run around to all the SQL functions that derive from varstr_cmp()
and mark them leakproof. This should result in a useful gain in
flexibility/performance for queries in which non-leakproofness degrades
the efficiency of the query plan.
Back-patch to v12 where nondeterministic collations were added.
While this isn't an essential bug fix given the determination
that varstr_cmp() is leakproof, we might as well apply it now that
we've been forced into a post-beta4 catversion bump.
Discussion: https://postgr.es/m/31481.1568303470@sss.pgh.pa.us
text_pattern_ops and its siblings can't be used with nondeterministic
collations, because they use the text_eq operator which will not behave
as bitwise equality if applied with a nondeterministic collation. The
initial implementation of that restriction was to insert a run-time test
in the related comparison functions, but that is inefficient, may throw
misleading errors, and will throw errors in some cases that would work.
It seems sufficient to just prevent the combination during CREATE INDEX,
so do that instead.
Lacking any better way to identify the opclasses involved, we need to
hard-wire tests for them, which requires hand-assigned values for their
OIDs, which forces a catversion bump because they previously had OIDs
that would be assigned automatically. That's slightly annoying in the
v12 branch, but fortunately we're not at rc1 yet, so just do it.
Back-patch to v12 where nondeterministic collations were added.
In passing, run make reformat-dat-files, which found some unrelated
whitespace issues (slightly different ones in HEAD and v12).
Peter Eisentraut, with small corrections by me
Discussion: https://postgr.es/m/22566.1568675619@sss.pgh.pa.us
The new function stashes its output value in a JsonbValue that can be
passed in by the caller, which enables some of them to pass
stack-allocated structs -- saving palloc cycles. It also allows some
callers that know they are handling a jsonb object to use this new jsonb
object-specific API, instead of going through generic container
findJsonbValueFromContainer.
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
Instead of creating an iterator object at each step down the JSONB
object/array, we can just just examine its object/array flags, which is
faster. Also, use the recently introduced JsonbValueAsText instead of
open-coding the same thing, for code simplicity.
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
jsonb_object_field_text and jsonb_array_element_text both contained
identical copies of this code, so extract that into new routine
JsonbValueAsText. This can also be used in other places, to measurable
performance benefit: the jsonb_each() and jsonb_array_elements()
functions can use it for outputting text forms instead of their less
efficient current implementation (because we no longer need to build
intermediate a jsonb representation of each value).
Author: Nikita Glukhov
Discussion: https://postgr.es/m/7c417f90-f95f-247e-ba63-d95e39c0ad14@postgrespro.ru
Although the SQL/JSON tech report makes reference to ECMAScript which
allows both single- and double-quoted strings, all the rest of the
report speaks only of double-quoted string literals in jsonpaths.
That's more compatible with JSON itself; moreover single-quoted strings
are hard to use inside a jsonpath that is itself a single-quoted SQL
literal. So guess that the intent is to allow only double-quoted
literals, and remove lexer support for single-quoted literals.
It'll be less painful to add this again later if we're wrong, than to
remove a shipped feature.
Also, adjust the lexer so that unrecognized backslash sequences are
treated as just meaning the escaped character, not as errors. This
change has much better support in the standards, as JSON, JavaScript
and ECMAScript all make it plain that that's what's supposed to
happen.
Back-patch to v12.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
The SQL spec defers to XQuery to define what the option flags are
for LIKE_REGEX patterns. XQuery says that:
* 's' allows the dot character to match newlines, which by
default it will not;
* 'm' allows ^ and $ to match at newlines, not only at the
start/end of the whole string.
Thus, these are *not* inverses as they are for the similarly-named
POSIX options, and neither one corresponds to the POSIX 'n' option.
Fortunately, Spencer's library does expose these two behaviors as
separately twiddlable flags, so we just have to fix the mapping from
JSP flag bits to REG flag bits. I also chose to rename the symbol
for 's' to DOTALL, to make it clearer that it's not the inverse
of MLINE.
Also, XQuery says that if the 'q' flag "is used together with the m, s,
or x flag, that flag has no effect". I read this as saying that 'q'
overrides the other flags; whoever wrote our code seems to have read
it backwards.
Lastly, while XQuery's 'x' flag is related to what Spencer's code
does for REG_EXPANDED, it's not the same or a subset. It seems best
to treat XQuery's 'x' as unimplemented for now. Maybe later we can
expand our regex code to offer 'x'-style parsing as a separate option.
While at it, refactor the jsonpath code so that (a) there's only
one copy of the flag transformation logic not two, and (b) the
processing of flags is independent of the order in which the flags
are written.
We need some documentation updates to go with this, but I'll
tackle that separately.
Back-patch to v12 where this code originated.
Discussion: https://postgr.es/m/CAPpHfdvDci4iqNF9fhRkTqhe-5_8HmzeLt56drH%2B_Rv2rNRqfg@mail.gmail.com
Reference: https://www.w3.org/TR/2017/REC-xpath-functions-31-20170321/#flags
SQL Standard 2016 defines SSSSS format pattern for seconds past midnight in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. In our
datetime parsing engine we currently support it with SSSS name.
This commit adds SSSSS as an alias for SSSS. Alias is added in favor of
upcoming jsonpath .datetime() method. But it's also supported in to_date()/
to_timestamp() as positive side effect.
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
SQL Standard 2016 defines FF1-FF9 format patters for fractions of seconds in
jsonpath .datetime() method and CAST (... FORMAT ...) SQL clause. Parsing
engine of upcoming .datetime() method will be shared with to_date()/
to_timestamp().
This patch implements FF1-FF6 format patterns for upcoming jsonpath .datetime()
method. to_date()/to_timestamp() functions will also get support of this
format patterns as positive side effect. FF7-FF9 are not supported due to
lack of precision in our internal timestamp representation.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Heavily revised by me.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
Tom Lane
Jeff Davis
Michael Paquier
Thomas Munro
Fujii Masao
Peter Eisentraut
Alvaro Herrera
Andrew Gierth
Robert Haas
Dean Rasheed
Alexander Korotkov
Tomas Vondra
Andrew Dunstan
Bruce Momjian
Amit Kapila
Andres Freund
Peter Geoghegan