The foreign server OID stored in the connection cache entry is used as
a lookup key to directly get the server name.
Previously since the connection cache entry did not have the server OID,
postgres_fdw had to get the server OID at first from user mapping before
getting the server name. So if the corresponding user mapping was dropped,
postgres_fdw could raise the error "cache lookup failed for user mapping"
while looking up user mapping and fail to get the server name even though
the server had not been dropped yet.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CALj2ACVRZPUB7ZwqLn-6DY8C_UmPs6084gSpHA92YBv++1AJXA@mail.gmail.com
This is the same fix as commit 9eabfe300 applied to INDEX ATTACH
entries, but for table-to-publication attachments. As in that
case, even though the backend doesn't record "ownership" of the
attachment, we still ought to label it in the dump archive with
the role name that should run the ALTER PUBLICATION command.
The existing behavior causes the ALTER to be done by the original
role that started the restore; that will usually work fine, but
there may be corner cases where it fails.
The bulk of the patch is concerned with changing struct
PublicationRelInfo to include a pointer to the associated
PublicationInfo object, so that we can get the owner's name
out of that when the time comes. While at it, I rewrote
getPublicationTables() to do just one query of pg_publication_rel,
not one per table.
Back-patch to v10 where this code was introduced.
Discussion: https://postgr.es/m/1165710.1610473242@sss.pgh.pa.us
When a tablespace is used in a partitioned relation (per commits
ca4103025d in pg12 for tables and 33e6c34c32 in pg11 for indexes),
it is possible to drop the tablespace, potentially causing various
problems. One such was reported in bug #16577, where a rewriting ALTER
TABLE causes a server crash.
Protect against this by using pg_shdepend to keep track of tablespaces
when used for relations that don't keep physical files; we now abort a
tablespace if we see that the tablespace is referenced from any
partitioned relations.
Backpatch this to 11, where this problem has been latent all along. We
don't try to create pg_shdepend entries for existing partitioned
indexes/tables, but any ones that are modified going forward will be
protected.
Note slight behavior change: when trying to drop a tablespace that
contains both regular tables as well as partitioned ones, you'd
previously get ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE and now you'll
get ERRCODE_DEPENDENT_OBJECTS_STILL_EXIST. Arguably, the latter is more
correct.
It is possible to add protecting pg_shdepend entries for existing
tables/indexes, by doing
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE pg_default;
ALTER TABLE ONLY some_partitioned_table SET TABLESPACE original_tablespace;
for each partitioned table/index that is not in the database default
tablespace. Because these partitioned objects do not have storage, no
file needs to be actually moved, so it shouldn't take more time than
what's required to acquire locks.
This query can be used to search for such relations:
SELECT ... FROM pg_class WHERE relkind IN ('p', 'I') AND reltablespace <> 0
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/16577-881633a9f9894fd5@postgresql.org
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Commit fef5b47f6b added the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
But the buildfarm member florican reported that this test failed because
the requested WAL segment was removed and replication failed. This is a
timing issue. Since neither replication slot is used nor wal_keep_size is set
in the test, checkpoint could remove the WAL segment that's still necessary
for replication.
This commit stabilizes the test by setting wal_keep_size.
Back-patch to v13 where the regression test that this commit stabilizes
was added.
Author: Fujii Masao
Discussion: https://postgr.es/m/X//PsenxcC50jDzX@paquier.xyz
This commit makes CLOSE, FETCH and MOVE commands tab-complete the list of
cursors. Also this commit makes DECLARE command tab-complete the options.
Author: Shinya Kato, Sawada Masahiko, tweaked by Fujii Masao
Reviewed-by: Shinya Kato, Sawada Masahiko, Fujii Masao
Discussion: https://postgr.es/m/b0e4c5c53ef84c5395524f5056fc71f0@MP-MSGSS-MBX001.msg.nttdata.co.jp
Remove redundant function declaration and improve header comment in
pg_iovec.h. Move the new declaration in fd.h next to a group of more
similar functions.
Commit 709d003fbd refactored WAL-reading code, but accidentally caused
WalSndSegmentOpen() to fail to follow a timeline switch while reading from
a historic timeline. This issue caused a standby to fail to follow a primary
on a newer timeline when WAL archiving is enabled.
If there is a timeline switch within the segment, WalSndSegmentOpen() should
read from the WAL segment belonging to the new timeline. But previously
since it failed to follow a timeline switch, it tried to read the WAL segment
with old timeline. When WAL archiving is enabled, that WAL segment with
old timeline doesn't exist because it's renamed to .partial. This leads
a primary to have tried to read non-existent WAL segment, and which caused
replication to faill with the error "ERROR: requested WAL segment ... has
already been removed".
This commit fixes WalSndSegmentOpen() so that it's able to follow a timeline
switch, to ensure that a standby is able to follow a primary on a newer
timeline even when WAL archiving is enabled.
This commit also adds the regression test to check whether a standby is
able to follow a primary on a newer timeline when WAL archiving is enabled.
Back-patch to v13 where the bug was introduced.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi, tweaked by Fujii Masao
Reviewed-by: Alvaro Herrera, Fujii Masao
Discussion: https://postgr.es/m/20201209.174314.282492377848029776.horikyota.ntt@gmail.com
This commit addresses some issues with c3826f83 that moved the hex
decoding routine to src/common/:
- The decoding function lacked overflow checks, so when used for
security-related features it was an open door to out-of-bound writes if
not carefully used that could remain undetected. Like the base64
routines already in src/common/ used by SCRAM, this routine is reworked
to check for overflows by having the size of the destination buffer
passed as argument, with overflows checked before doing any writes.
- The encoding routine was missing. This is moved to src/common/ and
it gains the same overflow checks as the decoding part.
On failure, the hex routines of src/common/ issue an error as per the
discussion done to make them usable by frontend tools, but not by shared
libraries. Note that this is why ECPG is left out of this commit, and
it still includes a duplicated logic doing hex encoding and decoding.
While on it, this commit uses better variable names for the source and
destination buffers in the existing escape and base64 routines in
encode.c and it makes them more robust to overflow detection. The
previous core code issued a FATAL after doing out-of-bound writes if
going through the SQL functions, which would be enough to detect
problems when working on changes that impacted this area of the
code. Instead, an error is issued before doing an out-of-bound write.
The hex routines were being directly called for bytea conversions and
backup manifests without such sanity checks. The current calls happen
to not have any problems, but careless uses of such APIs could easily
lead to CVE-class bugs.
Author: Bruce Momjian, Michael Paquier
Reviewed-by: Sehrope Sarkuni
Discussion: https://postgr.es/m/20201231003557.GB22199@momjian.us
macOS's ranlib issued a warning about an empty pread.o file with the
previous arrangement, on systems new enough to require no replacement
functions. Let's go back to using configure's AC_REPLACE_FUNCS system
to build and include each .o in the library only if it's needed, which
requires moving the *v() functions to their own files.
Also move the _with_retry() wrapper to a more permanent home.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1283127.1610554395%40sss.pgh.pa.us
These need to be PR because they access the MyProcPort data structure,
which doesn't get copied to parallel workers. The very similar
functions inet_client_addr() and inet_client_port() are already
marked PR, but somebody missed these.
Although this is a pre-existing bug, we can't readily fix it in the back
branches since we can't force initdb. Given the small usage of these
two functions, and the even smaller likelihood that they'd get pushed to
a parallel worker anyway, it doesn't seem worth the trouble to suggest
that DBAs should fix it manually.
Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoAT4aHP0Uxq91qpD7NL009tnUYQe-b14R3MnSVOjtE71g@mail.gmail.com
The point of this restriction is to avoid trying to substitute variables
into timestamp literal values, which may contain strings like '12:34'.
There is a good deal more that should be done to reduce pgbench's
tendency to substitute where it shouldn't. But this is sufficient to
solve the case complained of by Jaime Soler, and it's simple enough
to back-patch.
Back-patch to v11; before commit 9d36a3866, pgbench had a slightly
different definition of what a variable name is, and anyway it seems
unwise to change long-stable branches for this.
Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2006291740420.805678@pseudo
The newly-added gist pageinspect test prints the LSNs of GiST pages,
expecting them all to be 1 (GistBuildLSN). But with wal_level=minimal,
they got updated by the whole-relation WAL-logging at commit. Fix by
wrapping the problematic tests in the same transaction with the CREATE
INDEX.
Per buildfarm failure on thorntail.
Discussion: https://www.postgresql.org/message-id/3B4F97E5-40FB-4142-8CAA-B301CDFBF982%40iki.fi
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
This is a follow-up of the work done in commit 0650ff2303. This commit
extends log_recovery_conflict_waits so that a log message is produced
also when recovery conflict has already been resolved after deadlock_timeout
passes, i.e., when the startup process finishes waiting for recovery
conflict after deadlock_timeout. This is useful in investigating how long
recovery conflicts prevented the recovery from applying WAL.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Bertrand Drouvot
Discussion: https://postgr.es/m/9a60178c-a853-1440-2cdc-c3af916cff59@amazon.com
1. The raw bytea representation of the point-type keys used in the test
depends on endianess. Remove the raw key_data column from the test.
2. The items stored on non-leftmost gist page depends on how many items
git on the other pages. This showed up as a failure on 32-bit i386
systems. To fix, only test the gist_page_items() function on the
leftmost leaf page.
Per Andrey Borodin and the buildfarm.
Discussion: https://www.postgresql.org/message-id/9FCEC1DC-86FB-4A57-88EF-DD13663B36AF%40yandex-team.ru
Similar to commit d6ad34f341, this patch optimizes
DropRelFileNodesAllBuffers() by avoiding the complete buffer pool scan and
instead find the buffers to be invalidated by doing lookups in the
BufMapping table.
This optimization helps operations where the relation files need to be
removed like Truncate, Drop, Abort of Create Table, etc.
Author: Kirk Jamison
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
This struct is used by ReindexRelationConcurrently to keep track of the
relations to process. This saves having to obtain some data repeatedly,
and has future uses as well.
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Hamid Akhtar <hamid.akhtar@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20201130195439.GA24598@alvherre.pgsql
Although a partitioned index's attachment to its parent doesn't
have separate ownership, the ArchiveEntry for it needs to be
marked with an owner anyway, to ensure that the ALTER command
is run by the appropriate role when restoring with
--use-set-session-authorization. Without this, the ALTER will
be run by the role that started the restore session, which will
usually work but it's formally the wrong thing.
Back-patch to v11 where this type of ArchiveEntry was added.
In HEAD, add equivalent commentary to the just-added TABLE ATTACH
case, which I'd made do the right thing already.
Discussion: https://postgr.es/m/1094034.1610418498@sss.pgh.pa.us
The recovery path of DropRelFileNodeBuffers() is optimized so that
scanning of the whole buffer pool can be avoided when the number of
blocks to be truncated in a relation is below a certain threshold. For
such cases, we find the buffers by doing lookups in BufMapping table.
This improves the performance by more than 100 times in many cases
when several small tables (tested with 1000 relations) are truncated
and where the server is configured with a large value of shared
buffers (greater than equal to 100GB).
This optimization helps cases (a) when vacuum or autovacuum truncated off
any of the empty pages at the end of a relation, or (b) when the relation is
truncated in the same transaction in which it was created.
This commit introduces a new API smgrnblocks_cached which returns a cached
value for the number of blocks in a relation fork. This helps us to determine
the exact size of relation which is required to apply this optimization. The
exact size is required to ensure that we don't leave any buffer for the
relation being dropped as otherwise the background writer or checkpointer
can lead to a PANIC error while flushing buffers corresponding to files that
don't exist.
Author: Kirk Jamison based on ideas by Amit Kapila
Reviewed-by: Kyotaro Horiguchi, Takayuki Tsunakawa, and Amit Kapila
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/OSBPR01MB3207DCA7EC725FDD661B3EDAEF660@OSBPR01MB3207.jpnprd01.prod.outlook.com
Previously, we emitted the ATTACH PARTITION command as part of
the child table's ArchiveEntry. This was a poor choice since it
complicates restoring the partition as a standalone table; you have
to ignore the error from the ATTACH, which isn't even an option when
restoring direct-to-database with pg_restore. (pg_restore will issue
the whole ArchiveEntry as one PQexec, so that any error rolls back
the table creation as well.) Hence, separate it out as its own
ArchiveEntry, as indeed we already did for index ATTACH PARTITION
commands.
Justin Pryzby
Discussion: https://postgr.es/m/20201023052940.GE9241@telsasoft.com
Wedging a new object type into this table has historically required
manually renumbering a lot of existing entries. (Although it appears
that some people got lazy and re-used the priority level of an
existing object type, even if it wasn't particularly related.)
We can let the compiler do the counting by inventing an enum type that
lists the desired priority levels in order. Now, if you want to add
or remove a priority level, that's a one-liner.
This patch is not purely cosmetic, because I split apart the priorities
of DO_COLLATION and DO_TRANSFORM, as well as those of DO_ACCESS_METHOD
and DO_OPERATOR, which look to me to have been merged out of expediency
rather than because it was a good idea. Shell types continue to be
sorted interchangeably with full types, and opclasses interchangeably
with opfamilies.
Commit 257836a7 accidentally deleted a couple of
redundant-but-conventional "extern" keywords on function prototypes.
Put them back.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Move it to class 57 (Operator Intervention), which seems like a
better choice given that from the client's standpoint it behaves
a heck of a lot like, e.g., ERRCODE_ADMIN_SHUTDOWN.
In a green field I'd put ERRCODE_IDLE_IN_TRANSACTION_SESSION_TIMEOUT
here as well. But that's been around for a few years, so it's
probably too late to change its SQLSTATE code.
Discussion: https://postgr.es/m/763A0689-F189-459E-946F-F0EC4458980B@hotmail.com
If a server returns ERRCODE_CANNOT_CONNECT_NOW, try the next host,
if multiple host names have been provided. This allows dealing
gracefully with standby servers that might not be in hot standby mode
yet.
In the wake of the preceding commit, it might be plausible to retry
many more error cases than we do now, but I (tgl) am hesitant to
move too aggressively on that --- it's not clear it'd be desirable
for cases such as bad-password, for example. But this case seems
safe enough.
Hubert Zhang, reviewed by Takayuki Tsunakawa
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Prefix "could not connect to host-or-socket-path:" to all connection
failure cases that occur after the socket() call, and remove the
ad-hoc server identity data that was appended to a few of these
messages. This should produce much more intelligible error reports
in multiple-target-host situations, especially for error cases that
are off the beaten track to any degree (because none of those provided
any server identity info).
As an example of the change, formerly a connection attempt with a bad
port number such as "psql -p 12345 -h localhost,/tmp" might produce
psql: error: could not connect to server: Connection refused
Is the server running on host "localhost" (::1) and accepting
TCP/IP connections on port 12345?
could not connect to server: Connection refused
Is the server running on host "localhost" (127.0.0.1) and accepting
TCP/IP connections on port 12345?
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.12345"?
Now it looks like
psql: error: could not connect to host "localhost" (::1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to host "localhost" (127.0.0.1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to socket "/tmp/.s.PGSQL.12345": No such file or directory
Is the server running locally and accepting connections on that socket?
This requires adjusting a couple of regression tests to allow for
variation in the contents of a connection failure message.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Add an optional callback to regression_main() that, if provided,
is invoked on each test output file before we try to compare it
to the expected-result file.
The main and isolation test programs don't need this (yet).
In pg_regress_ecpg, add a filter that eliminates target-host
details from "could not connect" error reports. This filter
doesn't do anything as of this commit, but it will be needed
by the next one.
In the long run we might want to provide some more general,
perhaps pattern-based, filtering mechanism for test output.
For now, this will solve the immediate problem.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Previously, we had an undisciplined mish-mash of printfPQExpBuffer and
appendPQExpBuffer calls to report errors within libpq. This commit
establishes a uniform rule that appendPQExpBuffer[Str] should be used.
conn->errorMessage is reset only at the start of an application request,
and then accumulates messages till we're done. We can remove no less
than three different ad-hoc mechanisms that were used to get the effect
of concatenation of error messages within a sequence of operations.
Although this makes things quite a bit cleaner conceptually, the main
reason to do it is to make the world safer for the multiple-target-host
feature that was added awhile back. Previously, there were many cases
in which an error occurring during an individual host connection attempt
would wipe out the record of what had happened during previous attempts.
(The reporting is still inadequate, in that it can be hard to tell which
host got the failure, but that seems like a matter for a separate commit.)
Currently, lo_import and lo_export contain exceptions to the "never
use printfPQExpBuffer" rule. If we changed them, we'd risk reporting
an incidental lo_close failure before the actual read or write
failure, which would be confusing, not least because lo_close happened
after the main failure. We could improve this by inventing an
internal version of lo_close that doesn't reset the errorMessage; but
we'd also need a version of PQfn() that does that, and it didn't quite
seem worth the trouble for now.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Provide synchronous vectored file I/O routines. These map to preadv()
and pwritev(), with fallback implementations for systems that don't have
them. Also provide a wrapper pg_pwritev_with_retry() that automatically
retries on short writes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Commit 5a3574d7b3 added the test for decoding of two-phase transactions
during the build of a consistent snapshot. The test forgot to skip empty
xacts which can lead to decoding of extra empty transactions due to
background activity by autovacuum.
Per report by buildfarm.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/363512.1610171267@sss.pgh.pa.us
Commit c9d529848 resulted in having a couple more places where
the error context stack for a failure varies depending on
debug_invalidate_system_caches_always (nee CLOBBER_CACHE_ALWAYS).
This is not very surprising, since we have to re-parse cached
plans if the plan cache is clobbered. Stabilize the expected
test output by hiding the context stack in these places,
as we've done elsewhere in this test script.
(Another idea worth considering, now that we have
debug_invalidate_system_caches_always, is to force it to zero for
these test cases. That seems like it'd risk reducing the coverage
of cache-clobber testing, which might or might not be worth being
able to verify that we get the expected error output in normal
cases. For the moment I just stuck with the existing technique.)
In passing, update comments that referred to CLOBBER_CACHE_ALWAYS.
Per buildfarm member hyrax.
brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
This commit addresses two issues:
- In pgcrypto, MD5 computation called pg_cryptohash_{init,update,final}
without checking for the result status.
- Simplify pg_checksum_raw_context to use only one variable for all the
SHA2 options available in checksum manifests.
Reported-by: Heikki Linnakangas
Discussion: https://postgr.es/m/f62f26bb-47a5-8411-46e5-4350823e06a5@iki.fi
Fujii Masao
Michael Paquier
Tom Lane
Alvaro Herrera
Thomas Munro
Heikki Linnakangas
Peter Geoghegan
Magnus Hagander
Amit Kapila
Bruce Momjian