An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
All the tape functions, like LogicalTapeRead and LogicalTapeWrite, now
take a LogicalTape as argument, instead of LogicalTapeSet+tape number.
You can create any number of LogicalTapes in a single LogicalTapeSet, and
you don't need to decide the number upfront, when you create the tape set.
This makes the tape management in hash agg spilling in nodeAgg.c simpler.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
Prior to v14, we insisted that the query in RETURN QUERY be of a type
that returns tuples. (For instance, INSERT RETURNING was allowed,
but not plain INSERT.) That happened indirectly because we opened a
cursor for the query, so spi.c checked SPI_is_cursor_plan(). As a
consequence, the error message wasn't terribly on-point, but at least
it was there.
Commit 2f48ede08 lost this detail. Instead, plain RETURN QUERY
insisted that the query be a SELECT (by checking for SPI_OK_SELECT)
while RETURN QUERY EXECUTE failed to check the query type at all.
Neither of these changes was intended.
The only convenient place to check this in the EXECUTE case is inside
_SPI_execute_plan, because we haven't done parse analysis until then.
So we need to pass down a flag saying whether to enforce that the
query returns tuples. Fortunately, we can squeeze another boolean
into struct SPIExecuteOptions without an ABI break, since there's
padding space there. (It's unlikely that any extensions would
already be using this new struct, but preserving ABI in v14 seems
like a smart idea anyway.)
Within spi.c, it seemed like _SPI_execute_plan's parameter list
was already ridiculously long, and I didn't want to make it longer.
So I thought of passing SPIExecuteOptions down as-is, allowing that
parameter list to become much shorter. This makes the patch a bit
more invasive than it might otherwise be, but it's all internal to
spi.c, so that seems fine.
Per report from Marc Bachmann. Back-patch to v14 where the
faulty code came in.
Discussion: https://postgr.es/m/1F2F75F0-27DF-406F-848D-8B50C7EEF06A@gmail.com
Several mistakes have piled in the code comments over the time,
including incorrect grammar, function names and simple typos. This
commit takes care of a portion of these.
No backpatch is done as this is only cosmetic.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210924215827.GS831@telsasoft.com
Up to now the size of a query's rangetable has been limited by the
constants INNER_VAR et al, which mustn't be equal to any real
rangetable index. 65000 doubtless seemed like enough for anybody,
and it still is orders of magnitude larger than the number of joins
we can realistically handle. However, we need a rangetable entry
for each child partition that is (or might be) processed by a query.
Queries with a few thousand partitions are getting more realistic,
so that the day when that limit becomes a problem is in sight,
even if it's not here yet. Hence, let's raise the limit.
Rather than just increase the values of INNER_VAR et al, this patch
adopts the approach of making them small negative values, so that
rangetables could theoretically become as long as INT_MAX.
The bulk of the patch is concerned with changing Var.varno and some
related variables from "Index" (unsigned int) to plain "int". This
is basically cosmetic, with little actual effect other than to help
debuggers print their values nicely. As such, I've only bothered
with changing places that could actually see INNER_VAR et al, which
the parser and most of the planner don't. We do have to be careful
in places that are performing less/greater comparisons on varnos,
but there are very few such places, other than the IS_SPECIAL_VARNO
macro itself.
A notable side effect of this patch is that while it used to be
possible to add INNER_VAR et al to a Bitmapset, that will now
draw an error. I don't see any likelihood that it wouldn't be a
bug to include these fake varnos in a bitmapset of real varnos,
so I think this is all to the good.
Although this touches outfuncs/readfuncs, I don't think a catversion
bump is required, since stored rules would never contain Vars
with these fake varnos.
Andrey Lepikhov and Tom Lane, after a suggestion by Peter Eisentraut
Discussion: https://postgr.es/m/43c7f2f5-1e27-27aa-8c65-c91859d15190@postgrespro.ru
The Value node struct is a weird construct. It is its own node type,
but most of the time, it actually has a node type of Integer, Float,
String, or BitString. As a consequence, the struct name and the node
type don't match most of the time, and so it has to be treated
specially a lot. There doesn't seem to be any value in the special
construct. There is very little code that wants to accept all Value
variants but nothing else (and even if it did, this doesn't provide
any convenient way to check it), and most code wants either just one
particular node type (usually String), or it accepts a broader set of
node types besides just Value.
This change removes the Value struct and node type and replaces them
by separate Integer, Float, String, and BitString node types that are
proper node types and structs of their own and behave mostly like
normal node types.
Also, this removes the T_Null node tag, which was previously also a
possible variant of Value but wasn't actually used outside of the
Value contained in A_Const. Replace that by an isnull field in
A_Const.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5ba6bc5b-3f95-04f2-2419-f8ddb4c046fb@enterprisedb.com
All the code paths simplified here were already using a boolean or used
an expression that led to zero or one, making the extra bits
unnecessary.
Author: Justin Pryzby
Reviewed-by: Tom Lane, Michael Paquier, Peter Smith
Discussion: https://postgr.es/m/20210428182936.GE27406@telsasoft.com
Improve two places in plpgsql, and one in spi.c, where an error
message would confusingly tell you that you couldn't use a SELECT
query, when what you had written *was* a SELECT query. The actual
problem is that you can't use SELECT ... INTO in these contexts,
but the messages failed to make that apparent. Special-case
SELECT INTO to make these errors more helpful.
Also, fix the same spots in plpgsql, as well as several messages
in exec_eval_expr(), to not quote the entire complained-of query or
expression in the primary error message. That behavior very easily
led to violating our message style guideline about keeping the primary
error message short and single-line. Also, since the important part
of the message was after the inserted text, it could make the real
problem very hard to see. We can report the query or expression as
the first line of errcontext instead.
Per complaint from Roger Mason. Back-patch to v14, since (a) some
of these messages are new in v14 and (b) v14's translatable strings
are still somewhat in flux. The problem's older than that of
course, but I'm hesitant to change the behavior further back.
Discussion: https://postgr.es/m/1914708.1629474624@sss.pgh.pa.us
The FDW batching code was using the same tuple descriptor both for all
slots (regular and plan slots), but that's incorrect - the subplan may
use a different descriptor. Currently this is benign, because batching
is used only for INSERTs, and in that case the descriptors always match.
But that would change if we allow batching UPDATEs.
Fix by copying the appropriate tuple descriptor. Backpatch to 14, where
the FDW batching was implemented.
Author: Amit Langote
Backpatch-through: 14, where FDW batching was added
Discussion: https://postgr.es/m/CA%2BHiwqEWd5B0-e-RvixGGUrNvGkjH2s4m95%3DJcwUnyV%3Df0rAKQ%40mail.gmail.com
It's not sensible to re-evaluate a direct-modify Foreign Update or Delete
during EvalPlanQual. However, ExecInitForeignScan() can still get called
if a table mixes local and foreign partitions. EvalPlanQualStart() left
the es_result_relations array uninitialized in the child EPQ EState, but
ExecInitForeignScan() still expected to find it. That caused a segfault.
Fix by skipping the es_result_relations lookup during EvalPlanQual
processing. To make things a bit more robust, also skip the
BeginDirectModify calls, and add a runtime check that ExecForeignScan()
is not called on direct-modify foreign scans during EvalPlanQual
processing.
This is new in v14, commit 1375422c78. Before that, EvalPlanQualStart()
copied the whole ResultRelInfo array to the EPQ EState. Backpatch to v14.
Report and diagnosis by Andrey Lepikhov.
Discussion: https://www.postgresql.org/message-id/cb2b808d-cbaa-4772-76ee-c8809bafcf3d%40postgrespro.ru
I failed to account for the possibility that when
ExecAppendAsyncEventWait() notifies multiple async-capable nodes using
postgres_fdw, a preceding node might invoke process_pending_request() to
process a pending asynchronous request made by a succeeding node. In
that case the succeeding node should produce a tuple to return to the
parent Append node from tuples fetched by process_pending_request() when
notified. Repair.
Per buildfarm via Michael Paquier. Back-patch to v14, like the previous
commit.
Thanks to Tom Lane for testing.
Discussion: https://postgr.es/m/YQP0UPT8KmPiHTMs%40paquier.xyz
A pending asynchronous request is handled by process_pending_request(),
which previously not only processed an in-progress remote query but
performed ExecForeignScan() to produce a tuple to return to the local
server asynchronously from the result of the remote query. But that led
to a server crash when executing a query or led to an "InstrStartNode
called twice in a row" or "InstrEndLoop called on running node" failure
when doing EXPLAIN ANALYZE of it, in cases where the plan tree for it
contained multiple async-capable nodes accessing the same
initplan/subplan that contained multiple async-capable nodes scanning
the same foreign tables as for the parent async-capable nodes, as
reported by Andrey Lepikhov. The reason is that the second step in
process_pending_request() invoked when executing the initplan/subplan
for one of the parent async-capable nodes caused recursive execution of
the initplan/subplan for another of the parent async-capable nodes.
To fix, split process_pending_request() into the two steps and postpone
the second step until ForeignAsyncConfigureWait() is called for each of
the pending asynchronous requests. Also, in ExecAppendAsyncEventWait()
we assumed that FDWs would register at least one wait event in a
WaitEventSet created there when they were called from
ForeignAsyncConfigureWait() in that function, but allow FDWs to register
zero wait events in the WaitEventSet; modify ExecAppendAsyncEventWait()
to just return in that case.
Oversight in commit 27e1f1456. Back-patch to v14 where that commit went
in.
Andrey Lepikhov and Etsuro Fujita
Discussion: https://postgr.es/m/fe5eaa19-1704-e4a4-76ee-3b9d37ade399@postgrespro.ru
The point of introducing the hash_mem_multiplier GUC was to let users
reproduce the old behavior of hash aggregation, i.e. that it could use
more than work_mem at need. However, the implementation failed to get
the job done on Win64, where work_mem is clamped to 2GB to protect
various places that calculate memory sizes using "long int". As
written, the same clamp was applied to hash_mem. This resulted in
severe performance regressions for queries requiring a bit more than
2GB for hash aggregation, as they now spill to disk and there's no
way to stop that.
Getting rid of the work_mem restriction seems like a good idea, but
it's a big job and could not conceivably be back-patched. However,
there's only a fairly small number of places that are concerned with
the hash_mem value, and it turns out to be possible to remove the
restriction there without too much code churn or any ABI breaks.
So, let's do that for now to fix the regression, and leave the
larger task for another day.
This patch does introduce a bit more infrastructure that should help
with the larger task, namely pg_bitutils.h support for working with
size_t values.
Per gripe from Laurent Hasson. Back-patch to v13 where the
behavior change came in.
Discussion: https://postgr.es/m/997817.1627074924@sss.pgh.pa.us
Discussion: https://postgr.es/m/MN2PR15MB25601E80A9B6D1BA6F592B1985E39@MN2PR15MB2560.namprd15.prod.outlook.com
Datum sorts can be significantly faster than tuple sorts, especially when
the data type being sorted is a pass-by-value type. Something in the
region of 50-70% performance improvements appear to be possible.
Just in case there's any confusion; the Datum sort is only used when the
targetlist of the Sort node contains a single column, not when there's a
single column in the sort key and multiple items in the target list.
Author: Ronan Dunklau
Reviewed-by: James Coleman, David Rowley, Ranier Vilela, Hou Zhijie
Tested-by: John Naylor
Discussion: https://postgr.es/m/3177670.itZtoPt7T5@aivenronan
Follow-up to 2ed532ee8c, a few error
messages in the logical replication area currently only deal with
tables, but if we're anticipating more relkinds such as sequences
being handled, then these messages also fall into the category
affected by the previous patch, so adjust them too.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/c9ba5c6a-4bd5-e12c-1b3c-edbcaedbf392@enterprisedb.com
"Result Cache" was never a great name for this node, but nobody managed
to come up with another name that anyone liked enough. That was until
David Johnston mentioned "Node Memoization", which Tom Lane revised to
just "Memoize". People seem to like "Memoize", so let's do the rename.
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/20210708165145.GG1176@momjian.us
Backpatch-through: 14, where Result Cache was introduced
Similar to 50e17ad28, which allowed hash tables to be used for IN clauses
with a set of constants, here we add the same feature for NOT IN clauses.
NOT IN evaluates the same as: WHERE a <> v1 AND a <> v2 AND a <> v3.
Obviously, if we're using a hash table we must be exactly equivalent to
that and return the same result taking into account that either side of
the condition could contain a NULL. This requires a little bit of
special handling to make work with the hash table version.
When processing NOT IN, the ScalarArrayOpExpr's operator will be the <>
operator. To be able to build and lookup a hash table we must use the
<>'s negator operator. The planner checks if that exists and is hashable
and sets the relevant fields in ScalarArrayOpExpr to instruct the executor
to use hashing.
Author: David Rowley, James Coleman
Reviewed-by: James Coleman, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvoF1mum_FRk6D621edcB6KSHBi2+GAgWmioj5AhOu2vwQ@mail.gmail.com
Previously, all CustomScan providers had to support projections,
but there may be cases where this is inconvenient. Add a flag
bit to say if it's supported.
Important item for the release notes: this is non-backwards-compatible
since the default is now to assume that CustomScan providers can't
project, instead of assuming that they can. It's fail-soft, but could
result in visible performance penalties due to adding unnecessary
Result nodes.
Sven Klemm, reviewed by Aleksander Alekseev; some cosmetic fiddling
by me.
Discussion: https://postgr.es/m/CAMCrgp1kyakOz6c8aKhNDJXjhQ1dEjEnp+6KNT3KxPrjNtsrDg@mail.gmail.com
Here we alter the code that calls build_pertrans_for_aggref() so that the
function no longer needs to special-case whether it's dealing with an
aggtransfn or an aggcombinefn. This allows us to reuse the
build_aggregate_transfn_expr() function and just get rid of the
build_aggregate_combinefn_expr() completely.
All of the special case code that was in build_pertrans_for_aggref() has
been moved up to the calling functions.
This saves about a dozen lines of code in nodeAgg.c and a few dozen more
in parse_agg.c
Also, rename a few variables in nodeAgg.c to try to make it more clear
that we're working with either a aggtransfn or an aggcombinefn. Some of
the old names would have you believe that we were always working with an
aggtransfn.
Discussion: https://postgr.es/m/CAApHDvptMQ9FmF0D67zC_w88yVnoNVR2+kkOQGUrCmdxWxLULQ@mail.gmail.com
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
Commit b676ac443b optimized handling of tuple slots with bulk inserts
into foreign tables, so that the slots are initialized only once and
reused for all batches. The data was however copied into the slots only
after the initialization, inserting duplicate values when the slot gets
reused. Fixed by moving the ExecCopySlot outside the init branch.
The existing postgres_fdw tests failed to catch this due to inserting
data into foreign tables without unique indexes, and then checking only
the number of inserted rows. This adds a new test with both a unique
index and a check of inserted values.
Reported-by: Alexander Pyhalov
Discussion: https://postgr.es/m/7a8cf8d56b3d18e5c0bccd6cd42d04ac%40postgrespro.ru
Commit b663a41363 introduced bulk inserts for FDW, but the handling of
tuple slots turned out to be problematic for two reasons. Firstly, the
slots were re-created for each individual batch. Secondly, all slots
referenced the same tuple descriptor - with reasonably small batches
this is not an issue, but with large batches this triggers O(N^2)
behavior in the resource owner code.
These two issues work against each other - to reduce the number of times
a slot has to be created/dropped, larger batches are needed. However,
the larger the batch, the more expensive the resource owner gets. For
practical batch sizes (100 - 1000) this would not be a big problem, as
the benefits (latency savings) greatly exceed the resource owner costs.
But for extremely large batches it might be much worse, possibly even
losing with non-batching mode.
Fixed by initializing tuple slots only once (and reusing them across
batches) and by using a new tuple descriptor copy for each slot.
Discussion: https://postgr.es/m/ebbbcc7d-4286-8c28-0272-61b4753af761%40enterprisedb.com
We've accumulated quite a mix of instances of "an SQL" and "a SQL" in the
documents. It would be good to be a bit more consistent with these.
The most recent version of the SQL standard I looked at seems to prefer
"an SQL". That seems like a good lead to follow, so here we change all
instances of "a SQL" to become "an SQL". Most instances correctly use
"an SQL" already, so it also makes sense to use the dominant variation in
order to minimise churn.
Additionally, there were some other abbreviations that needed to be
adjusted. FSM, SSPI, SRF and a few others. Also fix some pronounceable,
abbreviations to use "a" instead of "an". For example, "a SASL" instead
of "an SASL".
Here I've only adjusted the documents and error messages. Many others
still exist in source code comments. Translator hint comments seem to be
the biggest culprit. It currently does not seem worth the churn to change
these.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
Previously, we left the EPQ sub-executor alone until ExecEndLockRows.
This caused any buffer pins or other resources that it might hold to
remain held until ExecutorEnd, which in some code paths means that
they are held till the Portal is closed. That can cause user-visible
problems, such as blocking VACUUM; and it's unlike the behavior of
ordinary table-scanning nodes, which will have released all buffer
pins by the time they return an EOF indication.
We can make LockRows work more like other plan nodes by calling
EvalPlanQualEnd just before returning NULL. We still need to call it
in ExecEndLockRows in case the node was not run to completion, but in
the normal case the second call does nothing and costs little.
Per report from Yura Sokolov. In principle this is a longstanding
bug, but in view of the lack of other complaints and the low severity
of the consequences, I chose not to back-patch.
Discussion: https://postgr.es/m/4aa370cb91ecf2f9885d98b80ad1109c@postgrespro.ru
In cases where run-time pruning isn't required, the synchronous and
asynchronous subplans for an async-aware Append node determined using
classify_matching_subplans() should be re-used when rescanning the node,
but the previous code re-determined them using that function repeatedly
each time when rescanning the node, leading to incorrect results in a
normal build and an Assert failure in an Assert-enabled build as that
function doesn't assume that it's called repeatedly in such cases. Fix
the code as mentioned above.
My oversight in commit 27e1f1456.
While at it, initialize async-related pointers/variables to NULL/zero
explicitly in ExecInitAppend() and ExecReScanAppend(), just to be sure.
(The variables would have been set to zero before we get to the latter
function, but let's do so.)
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAPmGK16Q4B2_KY%2BJH7rb7wQbw54AUprp7TMekGTd2T1B62yysQ%40mail.gmail.com
When the planner considered using a Result Cache node to cache results
from the inner side of a Nested Loop Join, it failed to consider that the
inner path's parameterization may not be the entire join condition. If
the join was marked as inner_unique then we may accidentally put the cache
in singlerow mode. This meant that entries would be marked as complete
after caching the first row. That was wrong as if only part of the join
condition was parameterized then the uniqueness of the unique join was not
guaranteed at the Result Cache's level. The uniqueness is only guaranteed
after Nested Loop applies the join filter. If subsequent rows were found,
this would lead to:
ERROR: cache entry already complete
This could have been fixed by only putting the cache in singlerow mode if
the entire join condition was parameterized. However, Nested Loop will
only read its inner side so far as the first matching row when the join is
unique, so that might mean we never get an opportunity to mark cache
entries as complete. Since non-complete cache entries are useless for
subsequent lookups, we just don't bother considering a Result Cache path
in this case.
In passing, remove the XXX comment that claimed the above ERROR might be
better suited to be an Assert. After there being an actual case which
triggered it, it seems better to keep it an ERROR.
Reported-by: David Christensen
Discussion: https://postgr.es/m/CAOxo6X+dy-V58iEPFgst8ahPKEU+38NZzUuc+a7wDBZd4TrHMQ@mail.gmail.com
We consider this supported (though I've got my doubts that it's a
good idea, because tableoid is not immutable). However, several
code paths failed to fill the field in soon enough, causing such
a GENERATED expression to see zero or the wrong value. This
occurred when ALTER TABLE adds a new GENERATED column to a table
with existing rows, and during regular INSERT or UPDATE on a
foreign table with GENERATED columns.
Noted during investigation of a report from Vitaly Ustinov.
Back-patch to v12 where GENERATED came in.
Discussion: https://postgr.es/m/CAM_DEiWR2DPT6U4xb-Ehigozzd3n3G37ZB1+867zbsEVtYoJww@mail.gmail.com
COMMIT/ROLLBACK necessarily destroys all snapshots within the session.
The original implementation of intra-procedure transactions just
cavalierly did that, ignoring the fact that this left us executing in
a rather different environment than normal. In particular, it turns
out that handling of toasted datums depends rather critically on there
being an outer ActiveSnapshot: otherwise, when SPI or the core
executor pop whatever snapshot they used and return, it's unsafe to
dereference any toasted datums that may appear in the query result.
It's possible to demonstrate "no known snapshots" and "missing chunk
number N for toast value" errors as a result of this oversight.
Historically this outer snapshot has been held by the Portal code,
and that seems like a good plan to preserve. So add infrastructure
to pquery.c to allow re-establishing the Portal-owned snapshot if it's
not there anymore, and add enough bookkeeping support that we can tell
whether it is or not.
We can't, however, just re-establish the Portal snapshot as part of
COMMIT/ROLLBACK. As in normal transaction start, acquiring the first
snapshot should wait until after SET and LOCK commands. Hence, teach
spi.c about doing this at the right time. (Note that this patch
doesn't fix the problem for any PLs that try to run intra-procedure
transactions without using SPI to execute SQL commands.)
This makes SPI's no_snapshots parameter rather a misnomer, so in HEAD,
rename that to allow_nonatomic.
replication/logical/worker.c also needs some fixes, because it wasn't
careful to hold a snapshot open around AFTER trigger execution.
That code doesn't use a Portal, which I suspect someday we're gonna
have to fix. But for now, just rearrange the order of operations.
This includes back-patching the recent addition of finish_estate()
to centralize the cleanup logic there.
This also back-patches commit 2ecfeda3e into v13, to improve the
test coverage for worker.c (it was that test that exposed that
worker.c's snapshot management is wrong).
Per bug #15990 from Andreas Wicht. Back-patch to v11 where
intra-procedure COMMIT was added.
Discussion: https://postgr.es/m/15990-eee2ac466b11293d@postgresql.org
This seems to be leftover from ea15e1867 and from when we used to evaluate
SRFs at each node.
Since there is an unconditional "return" at the end of the loop body, only
1 loop is ever possible, so we can just change this into an if condition.
There is no actual bug being fixed here so no back-patch. It seems fine to
just fix this anomaly in master only.
Author: Greg Nancarrow
Discussion: https://postgr.es/m/CAJcOf-d7T1q0az-D8evWXnsuBZjigT04WkV5hCAOEJQZRWy28w@mail.gmail.com
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
It's unusual to have any resjunk columns in an ON CONFLICT ... UPDATE
list, but it can happen when MULTIEXPR_SUBLINK SubPlans are present.
If it happens, the ON CONFLICT UPDATE code path would end up storing
tuples that include the values of the extra resjunk columns. That's
fairly harmless in the short run, but if new columns are added to
the table then the values would become accessible, possibly leading
to malfunctions if they don't match the datatypes of the new columns.
This had escaped notice through a confluence of missing sanity checks,
including
* There's no cross-check that a tuple presented to heap_insert or
heap_update matches the table rowtype. While it's difficult to
check that fully at reasonable cost, we can easily add assertions
that there aren't too many columns.
* The output-column-assignment cases in execExprInterp.c lacked
any sanity checks on the output column numbers, which seems like
an oversight considering there are plenty of assertion checks on
input column numbers. Add assertions there too.
* We failed to apply nodeModifyTable's ExecCheckPlanOutput() to
the ON CONFLICT UPDATE tlist. That wouldn't have caught this
specific error, since that function is chartered to ignore resjunk
columns; but it sure seems like a bad omission now that we've seen
this bug.
In HEAD, the right way to fix this is to make the processing of
ON CONFLICT UPDATE tlists work the same as regular UPDATE tlists
now do, that is don't add "SET x = x" entries, and use
ExecBuildUpdateProjection to evaluate the tlist and combine it with
old values of the not-set columns. This adds a little complication
to ExecBuildUpdateProjection, but allows removal of a comparable
amount of now-dead code from the planner.
In the back branches, the most expedient solution seems to be to
(a) use an output slot for the ON CONFLICT UPDATE projection that
actually matches the target table, and then (b) invent a variant of
ExecBuildProjectionInfo that can be told to not store values resulting
from resjunk columns, so it doesn't try to store into nonexistent
columns of the output slot. (We can't simply ignore the resjunk columns
altogether; they have to be evaluated for MULTIEXPR_SUBLINK to work.)
This works back to v10. In 9.6, projections work much differently and
we can't cheaply give them such an option. The 9.6 version of this
patch works by inserting a JunkFilter when it's necessary to get rid
of resjunk columns.
In addition, v11 and up have the reverse problem when trying to
perform ON CONFLICT UPDATE on a partitioned table. Through a
further oversight, adjust_partition_tlist() discarded resjunk columns
when re-ordering the ON CONFLICT UPDATE tlist to match a partition.
This accidentally prevented the storing-bogus-tuples problem, but
at the cost that MULTIEXPR_SUBLINK cases didn't work, typically
crashing if more than one row has to be updated. Fix by preserving
resjunk columns in that routine. (I failed to resist the temptation
to add more assertions there too, and to do some minor code
beautification.)
Per report from Andres Freund. Back-patch to all supported branches.
Security: CVE-2021-32028
While we were (mostly) careful about ensuring that the dimensions of
arrays aren't large enough to cause integer overflow, the lower bound
values were generally not checked. This allows situations where
lower_bound + dimension overflows an integer. It seems that that's
harmless so far as array reading is concerned, except that array
elements with subscripts notionally exceeding INT_MAX are inaccessible.
However, it confuses various array-assignment logic, resulting in a
potential for memory stomps.
Fix by adding checks that array lower bounds aren't large enough to
cause lower_bound + dimension to overflow. (Note: this results in
disallowing cases where the last subscript position would be exactly
INT_MAX. In principle we could probably allow that, but there's a lot
of code that computes lower_bound + dimension and would need adjustment.
It seems doubtful that it's worth the trouble/risk to allow it.)
Somewhat independently of that, array_set_element() was careless
about possible overflow when checking the subscript of a fixed-length
array, creating a different route to memory stomps. Fix that too.
Security: CVE-2021-32027
In 9eacee2e6, I included some code to verify the cache's memory tracking
is correct by counting up the number of entries and the memory they use
each time we evict something from the cache. Those values are then
compared to the expected values using Assert. The problem is that this
requires looping over the entire cache hash table each time we evict an
entry from the cache. That can be pretty expensive, as noted by Pavel
Stehule.
Here we move this memory accounting checking code so that we only verify
it on cassert builds once when shutting down the Result Cache node.
Aside from the performance increase, this has two distinct advantages:
1) We do the memory checks at the last possible moment before destroying
the cache. This means we'll now catch accounting problems that might
sneak in after a cache eviction.
2) We now do the memory Assert checks when there were no cache evictions.
This increases the coverage.
One small disadvantage is that we'll now miss any memory tracking issues
that somehow managed to resolve themselves by the end of execution.
However, it seems to me that such a memory tracking problem would be quite
unlikely, and likely somewhat less harmful if one were to exist.
In passing, adjust the loop over the hash table to use the standard
simplehash.h method of iteration.
Reported-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRAzgoSkdEiqrKbT=7yG9FA5fjUAP3jmJywuDqYq6Ki5ug@mail.gmail.com
This is cleanup for commit 27e1f1456:
* ExecAppendAsyncEventWait(), which was modified a bit further by commit
a8af856d3, duplicated the same nevents calculation. Simplify the code
a little bit to avoid the duplication. Update comments there.
* Add an assertion to ExecAppendAsyncRequest().
* Update a comment about merging the async_capable options from input
relations in merge_fdw_options(), per complaint from Kyotaro Horiguchi.
* Add a comment for fetch_more_data_begin().
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK1637W30Wx3MnrReewhafn6F_0J76mrJGoFXFnpPq4QfvA%40mail.gmail.com
Adopt a more consistent policy about what slot-type-specific
getsysattr functions should do when system attributes are not
available. To wit, they should all throw the same user-oriented
error, rather than variously crashing or emitting developer-oriented
messages.
This closes a identifiable problem in commits a71cfc56b and
3fb93103a (in v13 and v12), so back-patch into those branches,
along with a test case to try to ensure we don't break it again.
It is not known that any of the former crash cases are reachable
in HEAD, but this seems like a good safety improvement in any case.
Discussion: https://postgr.es/m/141051591267657@mail.yandex.ru
During queries coming from ri_triggers.c, we need to omit partitions
that are marked pending detach -- otherwise, the RI query is tricked
into allowing a row into the referencing table whose corresponding row
is in the detached partition. Which is bogus: once the detach operation
completes, the row becomes an orphan.
However, the code was not doing that in repeatable-read transactions,
because relcache kept a copy of the partition descriptor that included
the partition, and used it in the RI query. This commit changes the
partdesc cache code to only keep descriptors that aren't dependent on
a snapshot (namely: those where no detached partition exist, and those
where detached partitions are included). When a partdesc-without-
detached-partitions is requested, we create one afresh each time; also,
those partdescs are stored in PortalContext instead of
CacheMemoryContext.
find_inheritance_children gets a new output *detached_exist boolean,
which indicates whether any partition marked pending-detach is found.
Its "include_detached" input flag is changed to "omit_detached", because
that name captures desired the semantics more naturally.
CreatePartitionDirectory() and RelationGetPartitionDesc() arguments are
identically renamed.
This was noticed because a buildfarm member that runs with relcache
clobbering, which would not keep the improperly cached partdesc, broke
one test, which led us to realize that the expected output of that test
was bogus. This commit also corrects that expected output.
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/3269784.1617215412@sss.pgh.pa.us
Previously, it was pg_stat_activity.queryid to match the
pg_stat_statements queryid column. This is an adjustment to patch
4f0b0966c8. This also adjusts some of the internal function calls to
match. Catversion bumped.
Reported-by: Álvaro Herrera, Julien Rouhaud
Discussion: https://postgr.es/m/20210408032704.GA7498@alvherre.pgsql
Tom Lane
Heikki Linnakangas
Robert Haas
Michael Paquier
Peter Eisentraut
Tomas Vondra
Etsuro Fujita
David Rowley
Andrew Dunstan
Alvaro Herrera
Bruce Momjian