The test never did ANALYZE on the test table, so the plans depended on
various defaults (e.g. number of groups being 200). This worked most of
the time, but with CLOBBER_CACHE_ALWAYS the autoanalyze often managed
to build accurate stats, changing the plan.
Fixed by increasing the size of test tables a bit, making the Sort a bit
more expensive than Incremental Sort. The tests were constructed to test
transitions in the Incremental Sort algorithm, and this change does not
break that.
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Repair an oversight in commit 8728b2c70: if we're postponing restore
of event triggers to the end, we must also postpone restoring any
comments on them, since of course we cannot create the comments first.
(This opens yet another opportunity for an event trigger to bollix
the restore, but there's no help for that.)
Per bug #16346 from Alexander Lakhin.
Like the previous commit, back-patch to all supported branches.
Hamid Akhtar and Tom Lane
Discussion: https://postgr.es/m/16346-6210ad7a0ea81be1@postgresql.org
GetWalRcvWriteRecPtr() previously reported the latest *flushed*
location. Adopt the conventional terminology used elsewhere in the tree
by renaming it to GetWalRcvFlushRecPtr(), and likewise for some related
variables that used the term "received".
Add a new definition of GetWalRcvWriteRecPtr(), which returns the latest
*written* value. This will allow later patches to use the value for
non-data-integrity purposes, without having to wait for the flush
pointer to advance.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
To control whether partition changes are replicated using their own
identity and schema or an ancestor's, add a new parameter that can be
set per publication named 'publish_via_partition_root'.
This allows replicating a partitioned table into a different partition
structure on the subscriber.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
0f5ca02f53 introduces 3 new keywords. It appears to be too much for relatively
small feature. Given now we past feature freeze, it's already late for
discussion of the new syntax. So, revert.
Discussion: https://postgr.es/m/28209.1586294824%40sss.pgh.pa.us
2nd pass of modifying various places which obtain the next power
of 2 of a number and make them use the new functions added in
f0705bb62.
In passing, also modify num_combinations(). This can be implemented
using simple bitshifting rather than looping.
Reviewed-by: John Naylor
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Attempting to use a COLLATE clause with a type that it not collatable in
a partition bound expression could crash the server. This commit fixes
the code by adding more checks similar to what is done when computing
index or partition attributes by making sure that there is a collation
iff the type is collatable.
Backpatch down to 12, as 7c079d7 introduced this problem.
Reported-by: Alexander Lakhin
Author: Dmitry Dolgov
Discussion: https://postgr.es/m/16325-809194cf742313ab@postgresql.org
Backpatch-through: 12
First pass of modifying various places that obtain the next power of 2 of
a number and make them use the new functions added in pg_bitutils.h
instead.
This also removes the _hash_log2() function. There are no longer any
callers in core. Other users can swap their _hash_log2(n) call to make use
of pg_ceil_log2_32(n).
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
If the memory context's maxBlockSize is too big, a single block
allocation can suddenly exceed work_mem. For Hash Aggregation, this
can mean spilling to disk too early or reporting a confusing memory
usage number for EXPLAN ANALYZE.
Introduce CreateWorkExprContext(), which is like CreateExprContext(),
except that it creates the AllocSet with a maxBlockSize that is
reasonable in proportion to work_mem.
Right now, CreateWorkExprContext() is only used by Hash Aggregation,
but it may be generally useful in the future.
Discussion: https://postgr.es/m/412a3fbf306f84d8d78c4009e11791867e62b87c.camel@j-davis.com
There are many areas in the code where we need to determine the next
highest power of 2 of a given number. We tend to always do that in an
ad-hoc way each time, generally with some tight for loop which performs a
bitshift left once per loop and goes until it finds a number above the
given number.
Here we add two generic functions which make use of the existing
pg_leftmost_one_pos* functions which, when available, will allow us to
calculate the next power of 2 without any looping.
Here we don't add any code which uses these new functions. That will be
done in follow-up commits.
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Trying to ensure that a slot's restart_lsn or amount of reserved bytes
exactly match some specific values seems unnecessary, and fragile as
shown by failures in multiple buildfarm members.
Discussion: https://postgr.es/m/20200407232602.GA21559@alvherre.pgsql
Provide PrefetchSharedBuffer(), a variant that takes SMgrRelation, for
use in recovery. Rename LocalPrefetchBuffer() to PrefetchLocalBuffer()
for consistency.
Add a return value to all of these. In recovery, tolerate and report
missing files, so we can handle relations unlinked before crash recovery
began. Also report cache hits and misses, so that callers can do faster
buffer lookups and better I/O accounting.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
This case didn't work because columns merged by FULL JOIN USING are
represented in the parse tree by COALESCE expressions, and the logic
for recognizing a partitionable join failed to match upper-level join
clauses to such expressions. To fix, synthesize suitable COALESCE
expressions and add them to the nullable_partexprs lists. This is
pretty ugly and brute-force, but it gets the job done. (I have
ambitions of rethinking the way outer-join output Vars are
represented, so maybe that will provide a cleaner solution someday.
For now, do this.)
Amit Langote, reviewed by Justin Pryzby, Richard Guo, and myself
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
The goal of separating hotly accessed per-backend data from PGPROC
into PGXACT is to make accesses fast (GetSnapshotData() in
particular). But delayChkpt is not actually accessed frequently; only
when starting a checkpoint. As it is frequently modified (multiple
times in the course of a single transaction), storing it in the same
cacheline as hotly accessed data unnecessarily dirties a contended
cacheline.
Therefore move delayChkpt to PGPROC.
This is part of a larger series of patches intending to improve
GetSnapshotData() scalability. It is committed and pushed separately,
as it is independently beneficial (small but measurable win, limited
by the other frequent modifications of PGXACT).
Author: Andres Freund
Reviewed-By: Robert Haas, Thomas Munro, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
SLRU page hits were tracked only in SimpleLruReadPage, but that's not
enough because we may hit the page in SimpleLruReadPage_ReadOnly in
which case we don't call SimpleLruReadPage at all.
Reported-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20200119143707.gyinppnigokesjok@development
Before the fix every 2PC commit/abort leaked a file descriptor. As the
files are opened using BasicOpenFile(), that quickly leads to the
backend running out of file descriptors.
Once enough 2PC abort/commit have caused enough FDs to leak, any IO
in the backend will fail with "Too many open files", as
BasicOpenFilePerm() will have triggered all open files known to fd.c
to be closed.
The leak causing the problem at hand is a consequence of 0dc8ead46,
but is only exascerbated by it. Previously most XLogPageReadCB
callbacks used static variables to cache one open file, but after the
commit the cache is private to each XLogReader instance. There never
was infrastructure to close FDs at the time of XLogReaderFree, but the
way XLogReader was used limited the leak to one FD.
This commit just closes the during XLogReaderFree() if the FD is
stored in XLogReaderState.seg.ws_segno. This may not be the way to
solve this medium/long term, but at least unbreaks 2PC.
Discussion: https://postgr.es/m/20200406025651.fpzdb5yyb7qyhqko@alap3.anarazel.de
Since heap TID is supposed to be just another key attribute to the
implementation, it doesn't make much sense to have separate
BTreeTupleSetNAtts() and BTreeTupleSetAltHeapTID() functions. Merge the
two functions together. This slightly simplifies _bt_truncate().
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
We invented \gx to allow the "\pset expanded" flag to be forced on
for the duration of one command output, but that turns out to not
be nearly enough to satisfy the demand for variant output formats.
Hence, make it possible to change any pset option(s) for the duration
of a single command output, by writing "option=value ..." inside
parentheses, for example
\g (format=csv csv_fieldsep='\t') somefile
\gx can now be understood as a shorthand for including expanded=on
inside the parentheses.
Patch by me, expanding on a proposal by Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRBx9OnBPRJVtfA5ycUpySge-XootAXAsv_4rrkHxJ8eRg@mail.gmail.com
This commit adds following optional clause to BEGIN and START TRANSACTION
commands.
WAIT FOR LSN lsn [ TIMEOUT timeout ]
New clause pospones transaction start till given lsn is applied on standby.
This clause allows user be sure, that changes previously made on primary would
be visible on standby.
New shared memory struct is used to track awaited lsn per backend. Recovery
process wakes up backend once required lsn is applied.
Author: Ivan Kartyshov, Anna Akenteva
Reviewed-by: Craig Ringer, Thomas Munro, Robert Haas, Kyotaro Horiguchi
Reviewed-by: Masahiko Sawada, Ants Aasma, Dmitry Ivanov, Simon Riggs
Reviewed-by: Amit Kapila, Alexander Korotkov
Discussion: https://postgr.es/m/0240c26c-9f84-30ea-fca9-93ab2df5f305%40postgrespro.ru
WITH TIES is an option to the FETCH FIRST N ROWS clause (the SQL
standard's spelling of LIMIT), where you additionally get rows that
compare equal to the last of those N rows by the columns in the
mandatory ORDER BY clause.
There was a proposal by Andrew Gierth to implement this functionality in
a more powerful way that would yield more features, but the other patch
had not been finished at this time, so we decided to use this one for
now in the spirit of incremental development.
Author: Surafel Temesgen <surafel3000@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/CALAY4q9ky7rD_A4vf=FVQvCGngm3LOes-ky0J6euMrg=_Se+ag@mail.gmail.com
Discussion: https://postgr.es/m/87o8wvz253.fsf@news-spur.riddles.org.uk
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. Lift that restriction by redeclaring the
bit number arguments as int8 (which requires a catversion bump,
hence is not back-patchable).
The similarly-named functions for bit/varbit don't really have a
problem because we restrict those types to at most VARBITMAXLEN bits;
hence leave them alone.
While here, extend the encode/decode functions in utils/adt/encode.c
to allow dealing with values wider than 1GB. This is not a live bug
or restriction in current usage, because no input could be more than
1GB, and since none of the encoders can expand a string more than 4X,
the result size couldn't overflow uint32. But it might be desirable
to support more in future, so make the input length values size_t
and the potential-output-length values uint64.
Also add some test cases to improve the miserable code coverage
of these functions.
Movead Li, editorialized some by me; also reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
Commit d2d8a229bc introduced Incremental Sort, but it was considered
only in create_ordered_paths() as an alternative to regular Sort. There
are many other places that require sorted input and might benefit from
considering Incremental Sort too.
This patch modifies a number of those places, but not all. The concern
is that just adding Incremental Sort to any place that already adds
Sort may increase the number of paths considered, negatively affecting
planning time, without any benefit. So we've taken a more conservative
approach, based on analysis of which places do affect a set of queries
that did seem practical. This means some less common queries may not
benefit from Incremental Sort yet.
Author: Tomas Vondra
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
It turns out that the code did indeed rely on a zeroed
TuplesortInstrumentation.sortMethod field to indicate
"this worker never did anything", although it seems the
issue only comes up during certain race-condition-y cases.
Hence, rearrange the TuplesortMethod enum to restore
SORT_TYPE_STILL_IN_PROGRESS to having the value zero,
and add some comments reinforcing that that isn't optional.
Also future-proof a loop over the possible values of the enum.
sizeof(bits32) happened to be the correct limit value,
but only by purest coincidence.
Per buildfarm and local investigation.
Discussion: https://postgr.es/m/12222.1586223974@sss.pgh.pa.us
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
An assertion added by commit 0d861bbb checked that _bt_killitems() only
processes a BTScanPosItem whose heap TID is contained in a posting list
tuple when its page offset number still matches what is on the page
(i.e. when it matches the posting list tuple's current offset number).
This was only correct in the common case where the page can't have
changed since we first read it. It was not correct in cases where we
don't drop the buffer pin (and don't need to verify the page hasn't
changed using its LSN). The latter category includes scans involving
unlogged tables, and scans that use a non-MVCC snapshot, per the logic
originally introduced by commit 2ed5b87f.
The assertion still seems helpful. Fix it by taking cases where the
page may have been concurrently modified into account.
Reported-By: Anastasia Lubennikova, Alexander Lakhin
Discussion: https://postgr.es/m/c4e38e9a-0f9c-8e53-e639-adf343f94472@postgrespro.ru
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Since commit 8f59f6b9c0, CLOBBER_CACHE_ALWAYS buildfarm members have
been failing this test case because the error message now sometimes
includes an error cursor position. It seems largely just luck that
that never happened before, and there are likely to be more ways it
could happen in future. Hence, rather than trying to prevent it,
adjust the test script to suppress that component of the report.
At some point we might need to back-patch this, but refrain until
there's a demonstrated need. (We'd need a different fix before v12,
anyway, since VERBOSITY=sqlstate is a recent thing.)
Tom Lane and Andres Freund
Discussion: https://postgr.es/m/30675.1586111599@sss.pgh.pa.us
Mainly, this adds support code in logical/worker.c for applying
replicated operations whose target is a partitioned table to its
relevant partitions.
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+HiwqH=Y85vRK3mOdjEkqFK+E=ST=eQiHdpj43L=_eJMOOznQ@mail.gmail.com
This new cache lookup routine has been introduced in a40caf5, and more
code paths can directly use it.
Note that in cluster_rel(), the code was returning immediately if the
tuple's entry in pg_index for the clustered index was not valid. This
commit changes the code so as a lookup error is raised instead,
something that could not happen from the start as we check for the
existence of the index beforehand, while holding an exclusive lock on
the parent table.
Author: Justin Pryzby
Reviewed-by: Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
This commit adds a new option WAL similar to existing option BUFFERS in the
EXPLAIN command. This option allows to include information on WAL record
generation added by commit df3b181499 in EXPLAIN output.
This also allows the WAL usage information to be displayed via
the auto_explain module. A new parameter auto_explain.log_wal controls
whether WAL usage statistics are printed when an execution plan is logged.
This parameter has no effect unless auto_explain.log_analyze is enabled.
Author: Julien Rouhaud
Reviewed-by: Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
This is for the benefit of running postgres under the rr
debugger. When using rr signal handlers running while a syscall is
active use an alternative stack. As e.g. bgworkers are started from
within signal handlers, the forked backend then has a different stack
base than postmaster. Previously that subsequently lead to those
processes triggering spurious "stack depth limit exceeded" errors.
Discussion: https://postgr.es/m/20200327182217.ubrrl32lyfhxfwk5@alap3.anarazel.de
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
Commit 7cb0a423f overlooked that the multi-level partition test table
pagg_tab_ml still had an exactly even row split at its upper level of
partitioning, so that some of the sub-aggregation plan steps still had
exactly equal costs, leading to plan instability. Tweak the partition
boundaries some more to make the row distribution unequal at both
levels. This leads to more changes in the "expected" plan order than
the previous round, but it seems fine. (Actually, I'm surprised that
this didn't affect even more plans in this test: looking at the
underlying costs shows that some of the parallel plan groups are
*not* getting sorted by cost. Bug?)
Per buildfarm member lousyjack,
https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=lousyjack&dt=2020-04-04%2021%3A03%3A04
Discussion: https://postgr.es/m/24467.1585838693@sss.pgh.pa.us
Commit 77ec5affb added an assertion to enforce_generic_type_consistency
that boils down to "if the function result is polymorphic, there must be
at least one polymorphic argument". This should be true for user-created
functions, but there are built-in functions for which it's not true, as
pointed out by Jaime Casanova. Hence, go back to the old behavior of
leaving the return type alone. There's only a limited amount of stuff
you can do with such a function result, but it does work to some extent;
add some regression test cases to ensure we don't break that again.
Discussion: https://postgr.es/m/CAJGNTeMbhtsCUZgJJ8h8XxAJbK7U2ipsX8wkHRtZRz-NieT8RA@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Don't try to be precise about it, just use a constant 16 bytes of
chunk overhead. Being smarter would require knowing the memory context
where the chunk will be allocated, which is not known by all callers.
Discussion: https://postgr.es/m/20200325220936.il3ni2fj2j2b45y5@alap3.anarazel.de
Commit 0d8c9c1210 allowed BASE_BACKUP to
acquire a ResourceOwner without a transaction so that the backup
manifest functionality could use a BufFile, but it overlooked the fact
that when a walsender is used with replication=database, it might have
a transaction in progress, because in that mode, SQL and replication
commands can be mixed. Try to fix things up so that the two cleanup
mechanisms don't conflict.
Per buildfarm member serinus, which triggered the problem when
CREATE_REPLICATION_SLOT failed from inside a transaction. It passed
on the subsequent run, so evidently the failure doesn't happen every
time.
lapwing is complaining that about a call to pg_gmtime, saying that
it "expected 'const pg_time_t *' but argument is of type 'time_t *'".
I at first thought that the problem had someting to do with const,
but Thomas Munro suggested that it might be just because time_t
and pg_time_t are different identifers. lapwing is i686 rather than
x86_64, and pg_time_t is always int64, so that seems like a good
guess.
There is other code that just casts time_t to pg_time_t without
any conversion function, so try that approach here.
Introduced in commit 0d8c9c1210.
It may be necessary to go further and remove this test altogether,
but I'm going to try this fix first. It's not clear, at least to
me, exactly how this is breaking buildfarm members, but it appears
to be doing so.
Move have_partkey_equi_join and match_expr_to_partition_keys to
relnode.c, since they're used only there. Refactor
build_joinrel_partition_info to split out the code that fills the
joinrel's partition key lists; this doesn't have any non-cosmetic
impact, but it seems like a useful separation of concerns.
Improve assorted nearby comments.
Amit Langote, with a little further editorialization by me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
The buildfarm is very unhappy right now because TAP test
003_corruption.pl uses TestLib::tempdir to generate the name of
a temporary directory that is used as a tablespace name, and
this results in a 'symbolic link target too long' error message
on many of the buildfarm machines, but not on my machine.
It appears that other people have run into similar problems in
the past and that TestLib::tempdir_short was the solution, so
let's try using that instead.
It seems that we have a policy that every Perl subroutine should
end with an explicit "return", so add explicit "return"
statements to all the new subroutines added by my prior
commit 0d8c9c1210.
Per buildfarm.
A manifest is a JSON document which includes (1) the file name, size,
last modification time, and an optional checksum for each file backed
up, (2) timelines and LSNs for whatever WAL will need to be replayed
to make the backup consistent, and (3) a checksum for the manifest
itself. By default, we use CRC-32C when checksumming data files,
because we are trying to detect corruption and user error, not foil an
adversary. However, pg_basebackup and the server-side BASE_BACKUP
command now have options to select a different algorithm, so users
wanting a cryptographic hash function can select SHA-224, SHA-256,
SHA-384, or SHA-512. Users not wanting file checksums at all can
disable them, or disable generating of the backup manifest altogether.
Using a cryptographic hash function in place of CRC-32C consumes
significantly more CPU cycles, which may slow down backups in some
cases.
A new tool called pg_validatebackup can validate a backup against the
manifest. If no checksums are present, it can still check that the
right files exist and that they have the expected sizes. If checksums
are present, it can also verify that each file has the expected
checksum. Additionally, it calls pg_waldump to verify that the
expected WAL files are present and parseable. Only plain format
backups can be validated directly, but tar format backups can be
validated after extracting them.
Robert Haas, with help, ideas, review, and testing from David Steele,
Stephen Frost, Andrew Dunstan, Rushabh Lathia, Suraj Kharage, Tushar
Ahuja, Rajkumar Raghuwanshi, Mark Dilger, Davinder Singh, Jeevan
Chalke, Amit Kapila, Andres Freund, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoZV8dw1H2bzZ9xkKwdrk8+XYa+DC9H=F7heO2zna5T6qg@mail.gmail.com
When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
This commit revives the original commit ed7a509571 that was reverted by
commit 19db23bcbd. The original commit had to be reverted because
it caused the regression test failure on the buildfarm members prion and
dory. But since commit c0885c4c30 got rid of the caues of the test failure,
the original commit can be safely introduced again.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
entryGetItem()'s three code paths each contained bugs associated
with filtering the entries for gin_fuzzy_search_limit.
The posting-tree path failed to advance "advancePast" after having
decided to filter an item. If we ran out of items on the current
page and needed to advance to the next, what would actually happen
is that entryLoadMoreItems() would re-load the same page. Eventually,
the random dropItem() test would accept one of the same items it'd
previously rejected, and we'd move on --- but it could take awhile
with small gin_fuzzy_search_limit. To add insult to injury, this
case would inevitably cause entryLoadMoreItems() to decide it needed
to re-descend from the root, making things even slower.
The posting-list path failed to implement gin_fuzzy_search_limit
filtering at all, so that all entries in the posting list would
be returned.
The bitmap-result path used a "gotitem" variable that it failed to
update in the one place where it'd actually make a difference, ie
at the one "continue" statement. I think this was unreachable in
practice, because if we'd looped around then it shouldn't be the
case that the entries on the new page are before advancePast.
Still, the "gotitem" variable was contributing nothing to either
clarity or correctness, so get rid of it.
Refactor all three loops so that the termination conditions are
more alike and less unreadable.
The code coverage report showed that we had no coverage at all for
the re-descend-from-root code path in entryLoadMoreItems(), which
seems like a very bad thing, so add a test case that exercises it.
We also had exactly no coverage for gin_fuzzy_search_limit, so add a
simplistic test case that at least hits those code paths a little bit.
Back-patch to all supported branches.
Adé Heyward and Tom Lane
Discussion: https://postgr.es/m/CAEknJCdS-dE1Heddptm7ay2xTbSeADbkaQ8bU2AXRCVC2LdtKQ@mail.gmail.com
The explain regression test runs EXPLAIN commands via the function
that filters unstable outputs. To produce more stable test output,
this commit improves the function so that it also filters out text-mode
Buffers lines. This is necessary because text-mode Buffers lines vary
depending the system state.
This improvement will get rid of the regression test failure that
the commit ed7a509571 caused on the buildfarm members prion and
dory because of the instability of Buffers lines.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20200403025751.GB1759@paquier.xyz
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
This commit introduces new wait events RecoveryConflictSnapshot and
RecoveryConflictTablespace. The former is reported while waiting for
recovery conflict resolution on a vacuum cleanup. The latter is reported
while waiting for recovery conflict resolution on dropping tablespace.
Also this commit changes the code so that the wait event Lock is reported
while waiting in ResolveRecoveryConflictWithVirtualXIDs() for recovery
conflict resolution on a lock. Basically the wait event Lock is reported
during that wait, but previously was not reported only when that wait
happened in ResolveRecoveryConflictWithVirtualXIDs().
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
This option is similar to \gset, except that it is able to store all
results from combined SQL queries into separate variables. If a query
returns multiple rows, the last result is stored and if a query returns
no rows, nothing is stored.
While on it, add a TAP test for \gset to check for a failure when a
query returns multiple rows.
Author: Fabien Coelho
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904081914200.2529@lancre
When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
The primary motivation for this change is that it will be used by the
upcoming patch to add backup manifests, but it also seems to have some
potential more general use.
Andres Freund and Robert Haas
Discussion: http://postgr.es/m/20200330020814.nspra4mvby42yoa4@alap3.anarazel.de
Instead of disabling autovacuum on these test tables, adjust the
partition boundaries so that the child partitions are not all the
same size. That should cause the planner to use a predictable
ordering of the per-partition scan nodes even in cases where
autovacuum causes the rowcount estimates to be off a bit.
Moreover, this also lets these tests show that the planner does
properly order the tables in descending size order, something
that wasn't being proven before.
The pagg_tab1 and pagg_tab2 partitions are still all the same
size, but that should be fine, because those tables are so small
that (1) autovacuum won't fire on them, and (2) even if it did,
it couldn't change the reltuples value --- with only one page,
it can't see just part of the relation.
Discussion: https://postgr.es/m/24467.1585838693@sss.pgh.pa.us
This patch replaces the boolean GUC log_parameters_on_error introduced
by commit ba79cb5dc with an integer log_parameter_max_length_on_error,
adding the ability to specify how many bytes to trim each logged
parameter value to. (The previous coding hard-wired that choice at
64 bytes.)
In addition, add a new parameter log_parameter_max_length that provides
similar control over truncation of query parameters that are logged in
response to statement-logging options, as opposed to errors. Previous
releases always logged such parameters in full, possibly causing log
bloat.
For backwards compatibility with prior releases,
log_parameter_max_length defaults to -1 (log in full), while
log_parameter_max_length_on_error defaults to 0 (no logging).
Per discussion, log_parameter_max_length is SUSET since the DBA should
control routine logging behavior, but log_parameter_max_length_on_error
is USERSET because it also affects errcontext data sent back to the
client.
Alexey Bashtanov, editorialized a little by me
Discussion: https://postgr.es/m/b10493cc-a399-a03a-67c7-068f2791ee50@imap.cc
In b07642dbc, we added code to trigger autovacuums based on the number of
INSERTs into a table. This seems to have cause some destabilization of
the regression tests. Likely this is due to an autovacuum triggering
mid-test and (per theory from Tom Lane) one of the test's queries causes
autovacuum to skip some number of pages, resulting in the reltuples
estimate changing.
The failure that this is attempting to fix is around the order of subnodes
in an Append. Since the planner orders these according to the subnode
cost, then it's possible that a small change in the reltuples value changes
the subnode's cost enough that it swaps position with one of its fellow
subnodes.
The failure here only seems to occur on slower buildfarm machines. In this
case, lousyjack, which seems have taken over 8 minutes to run just
the partitionwise_aggregate test. Such a slow run would increase the
chances that the autovacuum launcher would trigger a vacuum mid-test.
Faster machines run this test in sub second time, so have a much smaller
window for an autovacuum to trigger.
Here we fix this by disabling autovacuum on all tables created in the test.
Additionally, this reverts the change made in the
partitionwise_aggregate test in 2dc16efed.
Discussion: https://postgr.es/m/22297.1585797192@sss.pgh.pa.us
This adds SQL expressions NORMALIZE() and IS NORMALIZED to convert and
check Unicode normal forms, per SQL standard.
To support fast IS NORMALIZED tests, we pull in a new data file
DerivedNormalizationProps.txt from Unicode and build a lookup table
from that, using techniques similar to ones already used for other
Unicode data. make update-unicode will keep it up to date. We only
build and use these tables for the NFC and NFKC forms, because they
are too big for NFD and NFKD and the improvement is not significant
enough there.
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/c1909f27-c269-2ed9-12f8-3ab72c8caf7a@2ndquadrant.com
Commit 40d964ec99 allowed vacuum command to process indexes in parallel but
forgot to accumulate the buffer usage stats of parallel workers. This
allows leader backend to accumulate buffer usage stats of all the parallel
workers.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Amit Kapila and Julien Rouhaud
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
There's a number of SLRU caches used to access important data like clog,
commit timestamps, multixact, asynchronous notifications, etc. Until now
we had no easy way to monitor these shared caches, compute hit ratios,
number of reads/writes etc.
This commit extends the statistics collector to track this information
for a predefined list of SLRUs, and also introduces a new system view
pg_stat_slru displaying the data.
The list of built-in SLRUs is fixed, but additional SLRUs may be defined
in extensions. Unfortunately, there's no suitable registry of SLRUs, so
this patch simply defines a fixed list of SLRUs with entries for the
built-in ones and one entry for all additional SLRUs. Extensions adding
their own SLRU are fairly rare, so this seems acceptable.
This patch only allows monitoring of SLRUs, not tuning. The SLRU sizes
are still fixed (hard-coded in the code) and it's not entirely clear
which of the SLRUs might need a GUC to tune size. In a way, allowing us
to determine that is one of the goals of this patch.
Bump catversion as the patch introduces new functions and system view.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/flat/20200119143707.gyinppnigokesjok@development
We require the partition key to be a subset of the set of columns
being made unique, so that physically-separate indexes on the different
partitions are sufficient to enforce the uniqueness constraint.
The existing code checked that the listed columns appear, but did not
inquire into the index semantics, which is a serious oversight given
that different index opclasses might enforce completely different
notions of uniqueness.
Ideally, perhaps, we'd just match the partition key opfamily to the
index opfamily. But hash partitioning uses hash opfamilies which we
can't directly match to btree opfamilies. Hence, look up the equality
operator in each family, and accept if it's the same operator. This
should be okay in a fairly general sense, since the equality operator
ought to precisely represent the opfamily's notion of uniqueness.
A remaining weak spot is that we don't have a cross-index-AM notion of
which opfamily member is "equality". But we know which one to use for
hash and btree AMs, and those are the only two that are relevant here
at present. (Any non-core AMs that know how to enforce equality are
out of luck, for now.)
Back-patch to v11 where this feature was introduced.
Guancheng Luo, revised a bit by me
Discussion: https://postgr.es/m/D9C3CEF7-04E8-47A1-8300-CA1DCD5ED40D@gmail.com
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
In a psql session, if the connection to the server is abruptly cut, the
referenced connection would become NULL as of CheckConnection(). This
could cause a hard crash with psql if attempting to connect by reusing
the past connection's data because of a null-pointer dereference with
either PQhost() or PQdb(). This issue is fixed by making sure that no
reuse of the past connection is done if it does not exist.
Issue has been introduced by 6e5f8d4, so backpatch down to 12.
Reported-by: Hugh Wang
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/16330-b34835d83619e25d@postgresql.org
Backpatch-through: 12
The coverity complained that dividing integer expressions and then
converting the integer quotient to type "double" would lose fractional
part. Typecasting one of the arguments of expression with double should
fix the report.
Author: Mahendra Singh Thalor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20200329224818.6phnhv7o2q2rfovf@alap3.anarazel.de
pg_rewind needs to copy from the source cluster to the target cluster a
set of relation blocks changed from the previous checkpoint where WAL
forked up to the end of WAL on the target. Building this list of
relation blocks requires a range of WAL segments that may not be present
anymore on the target's pg_wal, causing pg_rewind to fail. It is
possible to work around this issue by copying manually the WAL segments
needed but this may lead to some extra and actually useless work.
This commit introduces a new option allowing pg_rewind to use a
restore_command while doing the rewind by grabbing the parameter value
of restore_command from the target cluster configuration. This allows
the rewind operation to be more reliable, so as only the WAL segments
needed by the rewind are restored from the archives.
In order to be able to do that, a new routine is added to src/common/ to
allow frontend tools to restore files from archives using an
already-built restore command. This version is more simple than the
backend equivalent as there is no need to handle the non-recovery case.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
Must hold some lock on the pg_statistic_ext_data catalog *before*
we look up the tuple we aim to replace. Otherwise a concurrent
VACUUM FULL or similar operation could move it to a different TID,
leaving us trying to replace the wrong tuple.
Back-patch to v12 where this got broken.
Credit goes to Dean Rasheed; I'm just doing the clerical work.
Discussion: https://postgr.es/m/CAEZATCU0zHMDiQV0g8P2U+YSP9C1idUPrn79DajsbonwkN0xvQ@mail.gmail.com
The stats_ext test is not expecting that autovacuum will touch
any of its tables; an expectation falsified by commit b07642dbc.
Although I'm suspicious that there's something else going on that
makes extended stats estimates not 100% reproducible, it's pretty
easy to demonstrate that there are places in this test that fail
if an autovacuum updates the table's stats unexpectedly.
Hence, revert the band-aid changes made by 2dc16efed and 24566b359
in favor of summarily disabling autovacuum for all the tables that
this test checks estimated rowcounts for.
Also remove an evidently obsolete comment at the head of the test.
Discussion: https://postgr.es/m/15012.1585623298@sss.pgh.pa.us
When recovery target is reached and recovery is paused because of
recovery_target_action=pause, executing pg_wal_replay_resume() causes
the standby to promote, i.e., the recovery to end. So, in this case,
the previous message "Execute pg_wal_replay_resume() to continue"
logged was confusing because pg_wal_replay_resume() doesn't cause
the recovery to continue.
This commit improves the message logged when recovery is paused,
and the proper message is output based on what (pg_wal_replay_pause
or recovery_target_action) causes recovery to be paused.
Author: Sergei Kornilov, revised by Fujii Masao
Reviewed-by: Robert Haas
Discussion: https://postgr.es/m/19168211580382043@myt5-b646bde4b8f3.qloud-c.yandex.net
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This commit improves error reporting introduced by 911e702077. It puts
argument of errmsg() to the single line for easier grepping source for error
text. Also it improves wording of errhint().
