Ross Reedstrom, a couple months back) and to detect timezones that are
using leap-second timekeeping. The unknown-zone-name test is pretty
heuristic and ugly, but it seems better than the old behavior of just
switching to GMT given a bad name. Also make DecodePosixTimezone() a
tad more robust.
only remnant of this failed experiment is that the server will take
SET AUTOCOMMIT TO ON. Still TODO: provide some client-side autocommit
logic in libpq.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
in all cases, leaked TopMemoryContext memory in others. Make the
interaction between SetClientEncoding and InitializeClientEncoding
cleaner and better documented. I suspect these changes should be
back-patched into 7.3, but will wait on Tatsuo's verification.
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
Output \r\n termination on Win32.
Disallow literal carriage return as a data value,
backslash-carriage-return and \r still allowed.
Doc changes already committed.
an unneeded memory context and some variables that are not used anymore.
It's pretty trivial and the regression tests pass fine. There's no
change in functionality, only deletion of unused code. I left an empty
function because maybe I'll need it for nested transactions.
Alvaro Herrera
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
them as arrays of the internal datatype. This requires treating the
stavalues columns as 'anyarray' rather than 'text[]', which is not 100%
kosher but seems to work fine for the purposes we need for pg_statistic.
Perhaps in the future 'anyarray' will be allowed more generally.
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
> >
> > - Add check in pg_dump to see if the value returned is the max /min
> > values and replace with NO MAXVALUE, NO MINVALUE.
> >
> > - Change START and INCREMENT to use START WITH and INCREMENT BY syntax.
> > This makes it a touch easier to port to other databases with sequences
> > (Oracle). PostgreSQL supports both syntaxes already.
>
> + char bufm[100],
> + bufx[100];
>
> This seems to be an arbitary size. Why not set it to the actual maximum
> length?
>
> Also:
>
> + snprintf(bufm, 100, INT64_FORMAT, SEQ_MINVALUE);
> + snprintf(bufx, 100, INT64_FORMAT, SEQ_MAXVALUE);
>
> sizeof(bufm), sizeof(bufx) is probably the more
> maintenance-friendly/standard way to do it.
I changed the code to use sizeof - but will wait for a response from
Peter before changing the size. It's consistent throughout the sequence
code to be 100 for this purpose.
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
Adjustable threshold is gone in favor of keeping track of total requested
page storage and doling out proportional fractions to each relation
(with a minimum amount per relation, and some quantization of the results
to avoid thrashing with small changes in page counts). Provide special-
case code for indexes so as not to waste space storing useless page
free space counts. Restructure internal data storage to be a flat array
instead of list-of-chunks; this may cost a little more work in data
copying when reorganizing, but allows binary search to be used during
lookup_fsm_page_entry().
end of a btree index. This isn't super-effective, since we won't move
nondeletable pages, but it's better than nothing. Also, improve stats
displayed during VACUUM VERBOSE.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
RelOid_pg_class, and transaction locks XactLockTableId. RelId is renamed
to objId.
- LockObject() and UnlockObject() functions created, and their use
sprinkled throughout the code to do descent locking for domains and
types. They accept lock modes AccessShare and AccessExclusive, as we
only really need a 'read' and 'write' lock at the moment. Most locking
cases are held until the end of the transaction.
This fixes the cases Tom mentioned earlier in regards to locking with
Domains. If the patch is good, I'll work on cleaning up issues with
other database objects that have this problem (most of them).
Rod Taylor
known problem with failure to respond to 'pg_ctl stop -m fast', and
probable problems if SIGINT or SIGTERM arrives while processing a
SIGUSR2 interrupt that arrived while waiting for a new client query.
spec, which will also make alter sequence a touch easier.
sequence.c init_params() will check for settings which have been
defined twice, and complain.
Rod Taylor
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
restriction was debatable to begin with, but it has now become obvious
that it breaks forward-porting of user-defined types; contrib/lo being
the most salient example.
proposal on -hackers a couple days ago. The 'tgenabled' status of the
trigger is consulted when the trigger is added to the deferred queue
(i.e. when the event occurs that fires the trigger), not when the
deferred event is executed.
No regression tests, as another bug prevents them (the pg_trigger row
for a trigger is only loaded once per session, so any changes to it are
not noticed unless the client disconnects and reconnects).
Neil Conway
patches of 9-Dec (permissions fix) and 13-Dec (performance) as well as
a partial fix for locking issues: concurrent DROP COLUMN should not
create trouble anymore. But concurrent DROP TABLE is still a risk, and
there is no protection at all against creating a column of a domain while
we are altering the domain.
columns in DefineIndex. So, ALTER TABLE ... PRIMARY KEY will now
automatically add the NOT NULL constraint. It appeared the alter_table
regression test wanted this to occur, as after the change the regression
test better matched in inline 'fails'/'succeeds' comments.
Rod Taylor
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
disallowed by CREATE TABLE (eg, pseudo-types); also disallow these types
from being introduced by the range-function syntax. While at it, allow
CREATE TABLE to create zero-column tables, per recent pghackers discussion.
I am back-patching this into 7.3 since failure to disallow pseudo-types
is arguably a security hole.
given any malloc block until something is first allocated in it; but
thereafter, MemoryContextReset won't release that first malloc block.
This preserves the quick-reset property of the original policy, without
forcing 8K to be allocated to every context whether any of it is ever
used or not. Also, remove some more no-longer-needed explicit freeing
during ExecEndPlan.
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
execution state trees, and ExecEvalExpr takes an expression state tree
not an expression plan tree. The plan tree is now read-only as far as
the executor is concerned. Next step is to begin actually exploiting
this property.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
and eliminate its manual pfree() calls. This solves the encoding-conversion
bug recently reported, and should be faster and more robust than the
original coding anyway. For example, we are no longer at risk if
datatype output routines leak memory or choose to return a constant string.
operations: make sure we use operators that are compatible, as determined
by a mergejoin link in pg_operator. Also, add code to planner to ensure
we don't try to use hashed grouping when the grouping operators aren't
marked hashable.
sublink results and COPY's domain constraint checking. A Const that
isn't really constant is just a Bad Idea(tm). Remove hacks in
parse_coerce and other places that were needed because of the former
klugery.
Bruce Momjian
Tom Lane
Peter Eisentraut