Asserts would lead to a server core dump if an error occurred while
trying to abort a failed subtransaction (thereby leading to re-execution
of whatever parts of AbortSubTransaction had already run). This of course
does not prevent such an error from creating an infinite loop, but at
least we don't make the situation worse. Responds to an open item on
the subtransactions to-do list.
PROCLOCK structs in shared memory now have only a bitmask for held
locks, rather than counts (making them 40 bytes smaller, which is a
good thing). Multiple locks within a transaction are counted in the
local hash table instead, and we have provision for tracking which
ResourceOwner each count belongs to. Solves recently reported problem
with memory leakage within long transactions.
updates are no longer WAL-logged nor even fsync'd; we do not need to,
since after a crash no old pg_subtrans data is needed again. We truncate
pg_subtrans to RecentGlobalXmin at each checkpoint. slru.c's API is
refactored a little bit to separate out the necessary decisions.
RecentXmin (== MyProc->xmin). This ensures that it will be safe to
truncate pg_subtrans at RecentGlobalXmin, which should largely eliminate
any fear of bloat. Along the way, eliminate SubTransXidsHaveCommonAncestor,
which isn't really needed and could not give a trustworthy result anyway
under the lookback restriction.
In an unrelated but nearby change, #ifdef out GetUndoRecPtr, which has
been dead code since 2001 and seems unlikely to ever be resurrected.
of XLogInsert had the same sort of checkpoint interlock problem as
RecordTransactionCommit, and indeed I found some. Btree index build
and ALTER TABLE SET TABLESPACE write data outside the friendly confines
of the buffer manager, and therefore they have to take their own
responsibility for checkpoint interlock. The easiest solution seems to
be to force smgrimmedsync at the end of the index build or table copy,
even when the operation is being WAL-logged. This is sufficient since
the new index or table will be of interest to no one if we don't get
as far as committing the current transaction.
therefore starting with GetCurrentTransactionId is wrong. Fixes
miscomputation of RecentGlobalXmin leading to bizarre behavior
reported by Gavin Sherry.
number of active subtransaction XIDs in each backend's PGPROC entry,
and use this to avoid expensive probes into pg_subtrans during
TransactionIdIsInProgress. Extend EOXactCallback API to allow add-on
modules to get control at subxact start/end. (This is deliberately
not compatible with the former API, since any uses of that API probably
need manual review anyway.) Add basic reference documentation for
SAVEPOINT and related commands. Minor other cleanups to check off some
of the open issues for subtransactions.
Alvaro Herrera and Tom Lane.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
password/group files. Also allow read-only subtransactions of a read-write
parent, but not vice versa. These are the reasonably noncontroversial
parts of Alvaro's recent mop-up patch, plus further work on large objects
to minimize use of the TopTransactionResourceOwner.
SAVEPOINT/RELEASE/ROLLBACK-TO syntax. (Alvaro)
Cause COMMIT of a failed transaction to report ROLLBACK instead of
COMMIT in its command tag. (Tom)
Fix a few loose ends in the nested-transactions stuff.
recovery more manageable. Also, undo recent change to add FILE_HEADER
and WASTED_SPACE records to XLOG; instead make the XLOG page header
variable-size with extra fields in the first page of an XLOG file.
This should fix the boundary-case bugs observed by Mark Kirkwood.
initdb forced due to change of XLOG representation.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
probably should have been to begin with; this is to cover cases like
needing to recreate the per-db directory during WAL replay.
Also, fix heap_create to force pg_class.reltablespace to be zero instead
of the database's default tablespace; this makes the world safe for
CREATE DATABASE to handle all tables in the default tablespace alike,
as per previous discussion. And force pg_class.reltablespace to zero
when creating a relation without physical storage (eg, a view); this
avoids possibly having dangling references in this column after a
subsequent DROP TABLESPACE.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
not holding the buffer's cntx_lock or io_in_progress_lock. A recent
report from Litao Wu makes me wonder whether it is ever possible for
us to drop a buffer and forget to release its cntx_lock. The Assert
does not fire in the regression tests, but that proves little ...
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
temp tables, and avoid WAL-logging truncations of temp tables. Do issue
fsync on truncated files (not sure this is necessary but it seems like
a good idea).
rather than an error code, and does elog(ERROR) not elog(WARNING)
when it detects a problem. All callers were simply elog(ERROR)'ing on
failure return anyway, and I find it hard to envision a caller that would
not, so we may as well simplify the callers and produce the more useful
error message directly.
explicitly fsync'ing every (non-temp) file we have written since the
last checkpoint. In the vast majority of cases, the burden of the
fsyncs should fall on the bgwriter process not on backends. (To this
end, we assume that an fsync issued by the bgwriter will force out
blocks written to the same file by other processes using other file
descriptors. Anyone have a problem with that?) This makes the world
safe for WIN32, which ain't even got sync(2), and really makes the world
safe for Unixen as well, because sync(2) never had the semantics we need:
it offers no way to wait for the requested I/O to finish.
Along the way, fix a bug I recently introduced in xlog recovery:
file truncation replay failed to clear bufmgr buffers for the dropped
blocks, which could result in 'PANIC: heap_delete_redo: no block'
later on in xlog replay.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
costing us lots more to maintain than it was worth. On shared tables
it was of exactly zero benefit because we couldn't trust it to be
up to date. On temp tables it sometimes saved an lseek, but not often
enough to be worth getting excited about. And the real problem was that
we forced an lseek on every relcache flush in order to update the field.
So all in all it seems best to lose the complexity.
of whether we have successfully read data into a buffer; this makes the
error behavior a bit more transparent (IMHO anyway), and also makes it
work correctly for local buffers which don't use Start/TerminateBufferIO.
Collapse three separate functions for writing a shared buffer into one.
This overlaps a bit with cleanups that Neil proposed awhile back, but
seems not to have committed yet.
of VACUUM cases so that VACUUM requests don't affect the ARC state at all,
avoid corner case where BufferSync would uselessly rewrite a buffer that
no longer contains the page that was to be flushed. Make some minor
other cleanups in and around the bufmgr as well, such as moving PinBuffer
and UnpinBuffer into bufmgr.c where they really belong.
* removed a few redundant defines
* get_user_name safe under win32
* rationalized pipe read EOF for win32 (UPDATED PATCH USED)
* changed all backend instances of sleep() to pg_usleep
- except for the SLEEP_ON_ASSERT in assert.c, as it would exceed a
32-bit long [Note to patcher: If a SLEEP_ON_ASSERT of 2000 seconds is
acceptable, please replace with pg_usleep(2000000000L)]
I added a comment to that part of the code:
/*
* It would be nice to use pg_usleep() here, but only does 2000 sec
* or 33 minutes, which seems too short.
*/
sleep(1000000);
Claudio Natoli
in s_lock.c were not updated, and still refers to select. Made my grep
hit the wrong files, so I figured a simple patch was in order.. (other
refs in the same comment block was changed..)
Magnus Hagander
Tom Lane
Bruce Momjian
Neil Conway