special hack to ensure it would close its output file even after failure
due to elog(ERROR) partway through the copy. This is now unnecessary
because fd.c takes care of cleaning up open files at transaction abort;
worse, after fd.c closed the file copy.c would try to do so *again* at
the start of the next COPY command. This would result in havoc in most
implementations of stdio library.
/*
* Read above about cases when !ItemIdIsUsed(Citemid)
* (child item is removed)... Due to the fact that
* at the moment we don't remove unuseful part of
* update-chain, it's possible to get too old
* parent row here. Like as in the case which
* caused this problem, we stop shrinking here.
* I could try to find real parent row but want
* not to do it because of real solution will
* be implemented anyway, latter, and we are too
* close to 6.5 release. - vadim 06/11/99
*/
if (Ptp.t_data->t_xmax != tp.t_data->t_xmin)
...
and possibly for other cases too:
DO NOT cache status of transaction in unknown state
(i.e. non-committed and non-aborted ones)
Example:
T1 reads row updated/inserted by running T2 and cache T2 status.
T2 commits.
Now T1 reads a row updated by T2 and with HEAP_XMAX_COMMITTED
in t_infomask (so cached T2 status is not changed).
Now T1 EvalPlanQual gets updated row version without HEAP_XMIN_COMMITTED
-> TransactionIdDidCommit(t_xmin) and TransactionIdDidAbort(t_xmin)
return FALSE and T2 decides that t_xmin is not committed and gets
ERROR above.
It's too late to find more smart way to handle such cases and so
I just changed xact status caching and got rid TransactionIdFlushCache()
from code.
Changed: transam.c, xact.c, lmgr.c and transam.h - last three
just because of TransactionIdFlushCache() is removed.
2. heapam.c:
T1 marked a row for update. T2 waits for T1 commit/abort.
T1 commits. T3 updates the row before T2 locks row page.
Now T2 sees that new row t_xmax is different from xact id (T1)
T2 was waiting for. Old code did Assert here. New one goes to
HeapTupleSatisfiesUpdate. Obvious changes too.
3. Added Assert to vacuum.c
4. bufmgr.c: break
Assert(buf->r_locks == 0 && !buf->ri_lock)
into two Asserts.
2. varsup.c:ReadNewTransactionId(): don't read nextXid from disk -
this func doesn't allocate next xid, so ShmemVariableCache->nextXid
may be used (but GetNewTransactionId() must be called first).
3. vacuum.c: change elog(ERROR, "Child item....") to elog(NOTICE) -
this is not ERROR, proper handling is just not implemented, yet.
4. s_lock.c: increase S_MAX_BUSY by 2 times.
5. shmem.c:GetSnapshotData(): have to call ReadNewTransactionId()
_after_ SpinAcquire(ShmemIndexLock).
2. Get rid of locking when updating statistics in vacuum.
3. Use QuerySnapshot in COPY TO and call SetQuerySnashot
in main tcop loop before FETCH and COPY TO.
been applied. The patches are in the .tar.gz attachment at the end:
varchar-array.patch this patch adds support for arrays of bpchar() and
varchar(), which where always missing from postgres.
These datatypes can be used to replace the _char4,
_char8, etc., which were dropped some time ago.
block-size.patch this patch fixes many errors in the parser and other
program which happen with very large query statements
(> 8K) when using a page size larger than 8192.
This patch is needed if you want to submit queries
larger than 8K. Postgres supports tuples up to 32K
but you can't insert them because you can't submit
queries larger than 8K. My patch fixes this problem.
The patch also replaces all the occurrences of `8192'
and `1<<13' in the sources with the proper constants
defined in include files. You should now never find
8192 hardwired in C code, just to make code clearer.
--
Massimo Dal Zotto
to save a little bit of backend startup time. This way, the first
backend started after a VACUUM will rebuild the init file with up-to-date
statistics for the critical system indexes.
can be generated in a buffer and then sent to the frontend in a single
libpq call. This solves problems with NOTICE and ERROR messages generated
in the middle of a data message or COPY OUT operation.
2. Much faster btree tuples deletion in the case when first on page
index tuple is deleted (no movement to the left page(s)).
3. Remember blkno of new root page in BTPageOpaque of
left/right siblings when root page is splitted.
I've been working on the following TODO list item:
* psql \d on index with char()/varchar() fields shows improper length
I've attached a simple patch to fix this.
-Ryan
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
qualification expression trees in the execution state. Prevents from
memory exhaustion on INSERT, UPDATE or COPY to tables that have CHECK
constraints. Speedup against the variant using freeObject() is more than
factor 2.
Jan
a field was labelled as a primary key, the system automatically
created a unique index on the field. This patch extends it so
that the index has the indisprimary field set. You can pull a list
of primary keys with the followiing select.
SELECT pg_class.relname, pg_attribute.attname
FROM pg_class, pg_attribute, pg_index
WHERE pg_class.oid = pg_attribute.attrelid AND
pg_class.oid = pg_index.indrelid AND
pg_index.indkey[0] = pg_attribute.attnum AND
pg_index.indisunique = 't';
There is nothing in this patch that modifies the template database to
set the indisprimary attribute for system tables. Should they be
changed or should we only be concerned with user tables?
D'Arcy
Here is a first patch to cleanup the backend side of libpq.
This patch removes all external dependencies on the "Pfin" and "Pfout" that
are declared in pqcomm.h. These variables are also changed to "static" to
make sure.
Almost all the change is in the handler of the "copy" command - most other
areas of the backend already used the correct functions.
This change will make the way for cleanup of the internal stuff there - now
that all the functions accessing the file descriptors are confined to a
single directory.
where you state a format and arguments. the old behavior required
each appendStringInfo to have to have a sprintf() before it if any
formatting was required.
Also shortened several instances where there were multiple appendStringInfo()
calls in a row, doing nothing more then adding one more word to the String,
instead of doing them all in one call.
a backend core dump, because it was concatenating a potentially long
string onto another string that didn't necessarily have enough room.
Shame, shame.
Fixes a bug in the rule system that caused a crashing
backend when a join-view with calculated column is used
in subselect.
Modifies EXPLAIN to explain rewritten queries instead of
the plain SeqScan on a view. Rules can produce very deep
MORE
Jan.
Here are two new patches for the Win32 support.
1) The patch based on the one from Hiroshi Inoue [Inoue@tpf.co.jp], to
load
Winsock.dll from libpq.dll.
2) A patch for psql.c to remove the call to WSAStartup(), since it is
not
required when it's done in libpq.dll.
I'm still looking for the possibility of having a crypt() function in
libpq.dll too, the same way getopt was included. Any chance of getting
this
before 6.4, or should we wait for the next one?
//Magnus
I don't know if this is really related to the initdb problem
discussion (haven't followed it enough). But seems so because
it fixes a damn problem during index tuple insertion on
CREATE TABLE into pg_attribute_relid_attnum_index.
Anyway - this bug was really hard to find. During startup the
relcache reads in some prepared information about index
strategies from a file and then reinitializes the function
pointers inside the scanKey data. But for sake it assumed
single attribute index tuples (hasn't that changed recently).
Thus not all the strategies scanKey entries where initialized
properly, resulting in invalid addresses for the btree
comparision functions.
With the patch at the end the regression tests passed
excellent except for the sanity_check that crashed at vacuum
and the misc test where the select unique1 from onek2 outputs
the two rows in different order.
Jan
> sequence.patch
>
> adds the missing setval command to sequences. Owner of sequences
> can now set the last value to any value between min and max
> without recreating the sequence. This is useful after loading
> data from external files.
if MULTIBYTE is not enabled. So be sure to run initdb.
o these patches are made against the latest source tree (after
Bruce's massive patch, I think) BTW, I noticed that after running
regression, the oid field of pg_type seems disappeared.
regression=> select oid from pg_type; ERROR: attribute
'oid' not found
this happens after the constraints test. This occures with/without
my patches. strange...
o pg_database_mb.h, pg_class_mb.h, pg_attribute_mb.h are no longer
used, and shoud be removed.
o GetDatabaseInfo() in utils/misc/database.c removed (actually in
#ifdef 0). seems nobody uses.
t-ishii@sra.co.jp
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
now. Here some tested features, (examples included in the patch):
1.1) Subselects in the having clause 1.2) Double nested subselects
1.3) Subselects used in the where clause and in the having clause
simultaneously 1.4) Union Selects using having 1.5) Indexes
on the base relations are used correctly 1.6) Unallowed Queries
are prevented (e.g. qualifications in the
having clause that belong to the where clause) 1.7) Insert
into as select
2) Queries using the having clause on view relations also work
but there are some restrictions:
2.1) Create View as Select ... Having ...; using base tables in
the select 2.1.1) The Query rewrite system:
2.1.2) Why are only simple queries allowed against a view from 2.1)
? 2.2) Select ... from testview1, testview2, ... having...; 3) Bug
in ExecMergeJoin ??
Regards Stefan
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
As mentioned around line 1153 in backend/commands/copy.c, the method
of array checking is not perfect.
test=> create table t1 (i text);
test=> insert into t1 values('{\\.}');
INSERT 2645600 1
test=> select * from t1;
i
-----
{\\.}
(2 rows)
test=> copy t1 to '/tmp/aaa';
test=> copy t1 from '/tmp/aaa';
ERROR: CopyReadAttribute - end of record marker corrupted
Copy cannot read data produced by itself!
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
1. Rewritten libpq to allow asynchronous clients.
2. Implemented client side of cancel protocol in library,
and patched psql.c to send a cancel request upon SIGINT. The
backend doesn't notice it yet :-(
3. Implemented 'Z' protocol message addition and renaming of
copy in/out start messages. These are implemented conditionally,
ie, the client protocol version is checked; so the code should
still work with 1.0 clients.
4. Revised protocol and libpq sgml documents (don't have an SGML
compiler, though, so there may be some markup glitches here).
What remains to be done:
1. Implement addition of atttypmod field to RowDescriptor messages.
The client-side code is there but ifdef'd out. I have no idea
what to change on the backend side. The field should be sent
only if protocol >= 2.0, of course.
2. Implement backend response to cancel requests received as OOB
messages. (This prolly need not be conditional on protocol
version; just do it if you get SIGURG.)
3. Update libpq.3. (I'm hoping this can be generated mechanically
from libpq.sgml... if not, will do it by hand.) Is there any
other doco to fix?
4. Update non-libpq interfaces as necessary. I patched libpgtcl
so that it would compile, but haven't tested it. Dunno what
needs to be done with the other interfaces.
Have at it!
Tom Lane
1. Removes the unnecessary "#define AbcRegProcedure 123"'s from
pg_proc.h.
2. Changes those #defines to use the names already defined in
fmgr.h.
3. Forces the make of fmgr.h in backend/Makefile instead of having
it
made as a dependency in access/common/Makefile *hack*hack*hack*
4. Rearranged the #includes to a less helter-skelter arrangement,
also
changing <file.h> to "file.h" to signify a non-system header.
5. Removed "pg_proc.h" from files where its only purpose was for
the
#defines removed in item #1.
6. Added "fmgr.h" to each file changed for completeness sake.
Turns out that #6 was not necessary for some files because fmgr.h
was being included in a roundabout way SIX levels deep by the first
include.
"access/genam.h"
->"access/relscan.h"
->"utils/rel.h"
->"access/strat.h"
->"access/skey.h"
->"fmgr.h"
So adding fmgr.h really didn't add anything to the compile, hopefully
just made it clearer to the programmer.
S Darren.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
1. Remove the char2, char4, char8 and char16 types from postgresql
2. Change references of char16 to name in the regression tests.
3. Rename the char16.sql regression test to name.sql. 4. Modify
the regression test scripts and outputs to match up.
Might require new regression.{SYSTEM} files...
Darren King
access overrun. For the sake of doing things properly here is a
patch which fixes it.
This patch is for the file backend/commands/sequence.c.
Maurice Gittens
yyerror ones from bison. It also includes a few 'enhancements' to
the C programming style (which are, of course, personal).
The other patch removes the compilation of backend/lib/qsort.c, as
qsort() is a standard function in stdlib.h and can be used any
where else (and it is). It was only used in
backend/optimizer/geqo/geqo_pool.c, backend/optimizer/path/predmig.c,
and backend/storage/page/bufpage.c
> > Some or all of these changes might not be appropriate for v6.3,
since we > > are in beta testing and since they do not affect the
current functionality. > > For those cases, how about submitting
patches based on the final v6.3 > > release?
There's more to come. Please review these patches. I ran the
regression tests and they only failed where this was expected
(random, geo, etc).
Cheers,
Jeroen
seems that my last post didn't make it through. That's good
since the diff itself didn't covered the renaming of
pg_user.h to pg_shadow.h and it's new content.
Here it's again. The complete regression test passwd with
only some float diffs. createuser and destroyuser work.
pg_shadow cannot be read by ordinary user.
Someone changed the parser to build a TypeName node on CREATE
FUNCTION in any case. As a side effect, ALL! functions
created got the proretset attribute to true. Thus for a
SELECT the parser wrapped an Iter node around the Expr and
since singleton functions set isDone the Iter returns no
tuple up.
varchar length.
Cleans up code so attlen is always length.
Removed varchar() hack added earlier.
Will fix bug in selecting varchar() fields, and varchar() can be
variable length.
Patch by: wieck@sapserv.debis.de (Jan Wieck)
One of the design rules of PostgreSQL is extensibility. And
to follow this rule means (at least for me) that there should
not only be a builtin PL. Instead I would prefer a defined
interface for PL implemetations.
o A new patch that contains the following changes:
-- The pg_pwd file is now cached in the postmaster's memory.
-- pg_pwd is reloaded when the postmaster detects a flag file creat()'ed
by a backend.
-- qsort() is used to sort loaded password entries, and bsearch() is
is used to find entries in the pg_pwd cache.
-- backends now copy the pg_user relation to pg_pwd.pid, and then
rename the temp file to be pg_pwd.
-- The delimiter for pg_pwd has been changed to a tab character.
Makefile.global.
End result, if all goes well, should allow for much easier porting, since
there will no longer be a concept of a "port". Most, if not everything,
*should* be determined by configure, or by the compiler itself. Still
work to be done though :)
async.c: #include <port-protos.h> surrounded by an #ifdef HAVE_STRDUP
vacuum.c: #include <port-protos.h> commented out...can someone comment as
to why it was included, as it doesn't seem to have any effect
under FreeBSD so far...would like some sort of #ifdef wrapper
like async.c if possible
start time equal to tuple->t_tmax.
Privent shrinking if there are tuples modifyed by running transactions
(it concerns system relations only, currently).
table. The table name is de-allocated by the CommitTransactionCommand()
in vc_init() before it is copied in VacRel.data and sometimes this causes
a SIGSEGV. My patch simply moves the strcpy before vc_init.
Submitted by Massimo Dal Zotto <dz@cs.unitn.it>.
Subject: [HACKERS] better access control error messages
This patch replaces the 'no such class or insufficient privilege' with
distinct error messages that tell you whether the table really doesn't
exist or whether access was denied.
as ints and longs. Touches on quite a few function args as
well. Most other files look ok as far as Oids go...still checking
though...
Since Oids are type'd as unsigned ints, they should prolly be used
with the %ud format string in elog and sprintf messages. Not sure
what kind of strangeness that could produce.
Darren King
Changes:
* Unique index capability works using the syntax 'create unique
index'.
* Duplicate OID's in the system tables are removed. I put
little scripts called 'duplicate_oids' and 'find_oid' in
include/catalog that help to find and remove duplicate OID's.
I also moved 'unused_oids' from backend/catalog to
include/catalog, since it has to be in the same directory
as the include files in order to work.
* The backend tries converting the name of a function or aggregate
to all lowercase if the original name given doesn't work (mostly
for compatibility with ODBC).
* You can 'SELECT NULL' to your heart's content.
* I put my _bt_updateitem fix in instead, which uses
_bt_insertonpg so that even if the new key is so big that
the page has to be split, everything still works.
* All literal references to system catalog OID's have been
replaced with references to define'd constants from the catalog
header files.
* I added a couple of node copy functions. I think this was a
preliminary attempt to get rules to work.
2. Reap unused tuples too
3. Reap empty pages
4. Check if a page is initialized, initialize it if not
and reap it
5. Binary search in list of reapped pages/tids to check
is the heap' tid pointed by a index' tuple on this list
(it's mu-u-uch faster)
It adds a WITH OIDS option to the copy command, which allows
dumping and loading of oids.
If a copy command tried to load in an oid that is greater than
its current system max oid, the system max oid is incremented. No
checking is done to see if other backends are running and have cached
oids.
pg_dump as its first step when using the -o (oid) option, will
copy in a dummy row to set the system max oid value so as rows are
loaded in, they are certain to be lower than the system oid.
pg_dump now creates indexes at the end to speed loading
Submitted by: Bruce Momjian <maillist@candle.pha.pa.us>
CLUSTER command couldn't rename correctly the new created heap relation.
The table base name resulted in some "temp_XXXX" instead of the correct
base name.
Submitted by: Dirk Koeser <koeser@informatik.uni-rostock.de>
pg_dump and load to 2.0. I haven't gotten any feedback on whether
people want it, so I am submitting it for others to decide. I would
recommend an install in 1.02.1.
I had said that the 2.0 pg_dump could dump a 1.02.1 database, but I was
wrong. The copy is actually performed by the backend, and the 2.0
database will not be able to read 1.02.1 databases because of the new
system columns.
This patch does several things. It copies nulls out as \N, so they can
be distinguished from '' strings. It fixes a problem where backslashes
in the input stream were not output as double-backslashes. Without this
patch, backslashes copied out were deleted upon input, or interpreted as
special characters. Third, input is now terminated by backslash-period.
This can not be part of a normal input stream.
I tested this by creating a database with all sorts of nulls, backslash,
and period fields and dumped the database and reloaded into a new
database and compared them.
Submitted by: Bruce