The unicode characters, while in comments and not code, caused MSVC
to emit compiler warning C4819:
The file contains a character that cannot be represented in the
current code page (number). Save the file in Unicode format to
prevent data loss.
Fix by replacing the characters in print.c with descriptive comments
containing the codepoints and symbol names, and remove the character
in brin_bloom.c which was a footnote reference copied from the paper
citation.
Per report from hamerkop in the buildfarm.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/340E4118-0D0C-4E85-8141-8C40EB22DA3A@yesql.se
In the same spirit as 6301c3ada, fix some more places where we were
using list_delete_first() in a loop and thereby risking O(N^2)
behavior. It's not clear that the lists manipulated in these spots
can get long enough to be really problematic ... but it's not clear
that they can't, either, and the fixes are simple enough.
As before, back-patch to v13.
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Failing to do so results in inability of logical decoding to process the
WAL stream. Handle it by doing nothing.
Backpatch all the way back.
Reported-by: Petr Jelínek <petr.jelinek@enterprisedb.com>
The opclass parameter Datums from the old index are fetched in the same
way as for predicates and expressions, by grabbing them directly from
the system catalogs. They are then copied into the new IndexInfo that
will be used for the creation of the new copy.
This caused the new index to be rebuilt with default parameters rather
than the ones pre-defined by a user. The only way to get back a new
index with correct opclass parameters would be to recreate a new index
from scratch.
The issue has been introduced by 911e702.
Author: Michael Paquier
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/YX0CG/QpLXcPr8HJ@paquier.xyz
Backpatch-through: 13
When replaying a transaction that held many exclusive locks on the
primary, a standby server's startup process would expend O(N^2)
effort on manipulating the list of locks. This code was fine when
written, but commit 1cff1b95a made repetitive list_delete_first()
calls inefficient, as explained in its commit message. Fix by just
iterating the list normally, and releasing storage only when done.
(This'd be inadequate if we needed to recover from an error occurring
partway through; but we don't.)
Back-patch to v13 where 1cff1b95a came in.
Nathan Bossart
Discussion: https://postgr.es/m/CD2F0E7F-9822-45EC-A411-AE56F14DEA9F@amazon.com
Commit 9ce346eabf added startup
progress reporting, but begin_startup_progress_phase has a race
condition: the timeout for the previous phase might fire just
before we reschedule the interrupt for the next phase.
To avoid the race, disable the timeout, clear the flag, and then
re-enable the timeout.
Patch by me, reviewed by Nitin Jadhav.
Discussion: https://postgr.es/m/CA+TgmoYq38i6iAzfRLVxA6Cm+wMCf4WM8wC3o_a+X_JvWC8bJg@mail.gmail.com
The previous code used ThisTimeLineID, which need not even be
initialized here, although it usually was in practice, because
pg_basebackup issues IDENTIFY_SYSTEM before calling BASE_BACKUP,
and that initializes ThisTimeLineID as a side effect. That's not
really good enough, though, not only because we shoudn't be counting
on side effects like that, but also because the TLI could change
meanwhile. Fortunately, we have convenient access to more meaningful
TLI values, so use those instead.
Because of the way this logic is coded, the consequences of using
a possibly-incorrect TLI here are no worse than a slightly confusing
error message, I don't want to take any risk here, so no back-patch
at least for now.
Patch by me, reviewed by Kyotaro Horiguchi and Michael Paquier
Discussion: http://postgr.es/m/CA+TgmoZRNWGWYDX9RgTXMG6_nwSdB=PB-PPRUbvMUTGfmL2sHQ@mail.gmail.com
Commit d168b66682, which overhauled index deletion, added a
pg_unreachable() to the end of a sort comparator used when sorting heap
TIDs from an index page. This allows the compiler to apply
optimizations that assume that the heap TIDs from the index AM must
always be unique.
That doesn't seem like a good idea now, given recent reports of
corruption involving duplicate TIDs in indexes on Postgres 14. Demote
to an assertion, just in case.
Backpatch: 14-, where index deletion was overhauled.
Comments above _bt_findinsertloc() that talk about LP_DEAD items are now
out of place. We already discuss index tuple deletion at an earlier
point in the same comment block.
Oversight in commit d168b666.
Grant privileges on views pg_backend_memory_contexts and
pg_shmem_allocations to the role pg_read_all_stats. Also grant on the
underlying functions that those views depend on.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/CALj2ACWAZo3Ar_EVsn2Zf9irG+hYK3cmh1KWhZS_Od45nd01RA@mail.gmail.com
A new option "FOR ALL TABLES IN SCHEMA" in Create/Alter Publication allows
one or more schemas to be specified, whose tables are selected by the
publisher for sending the data to the subscriber.
The new syntax allows specifying both the tables and schemas. For example:
CREATE PUBLICATION pub1 FOR TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
OR
ALTER PUBLICATION pub1 ADD TABLE t1,t2,t3, ALL TABLES IN SCHEMA s1,s2;
A new system table "pg_publication_namespace" has been added, to maintain
the schemas that the user wants to publish through the publication.
Modified the output plugin (pgoutput) to publish the changes if the
relation is part of schema publication.
Updates pg_dump to identify and dump schema publications. Updates the \d
family of commands to display schema publications and \dRp+ variant will
now display associated schemas if any.
Author: Vignesh C, Hou Zhijie, Amit Kapila
Syntax-Suggested-by: Tom Lane, Alvaro Herrera
Reviewed-by: Greg Nancarrow, Masahiko Sawada, Hou Zhijie, Amit Kapila, Haiying Tang, Ajin Cherian, Rahila Syed, Bharath Rupireddy, Mark Dilger
Tested-by: Haiying Tang
Discussion: https://www.postgresql.org/message-id/CALDaNm0OANxuJ6RXqwZsM1MSY4s19nuH3734j4a72etDwvBETQ@mail.gmail.com
Remove superuser check, allowing any user granted permissions on
pg_log_backend_memory_contexts() to log the memory contexts of any
backend.
Note that this could allow a privileged non-superuser to log the
memory contexts of a superuser backend, but as discussed, that does
not seem to be a problem.
Reviewed-by: Nathan Bossart, Bharath Rupireddy, Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/e5cf6684d17c8d1ef4904ae248605ccd6da03e72.camel@j-davis.com
The foreign data wrapper's validator function provides a HINT message with
list of valid options for the object specified in CREATE or ALTER command,
when the option given in the command is invalid. Previously
postgresql_fdw_validator() and the validator functions for postgres_fdw and
dblink_fdw worked in that way even there were no valid options in the object,
which could lead to the HINT message with empty list (because there were
no valid options). For example, ALTER FOREIGN DATA WRAPPER postgres_fdw
OPTIONS (format 'csv') reported the following ERROR and HINT messages.
This behavior was confusing.
ERROR: invalid option "format"
HINT: Valid options in this context are:
There is no such issue in file_fdw. The validator function for file_fdw
reports the HINT message "There are no valid options in this context."
instead in that case.
This commit improves postgresql_fdw_validator() and the validator functions
for postgres_fdw and dblink_fdw so that they do likewise. For example,
this change causes the above ALTER FOREIGN DATA WRAPPER command to
report the following messages.
ERROR: invalid option "nonexistent"
HINT: There are no valid options in this context.
Author: Kosei Masumura
Reviewed-by: Bharath Rupireddy, Fujii Masao
Discussion: https://postgr.es/m/557d06cebe19081bfcc83ee2affc98d3@oss.nttdata.com
The previous coding relied on the memory for the slots being zeroed
elsewhere, which while it was true in this case is not an contract
which is guaranteed to hold. Explicitly clear the tts_isnull array
to ensure that the slots are filled from a known state.
Backpatch to v14 where the catalog multi-inserts were introduced.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
Users sometimes get concerned whe they start the server and it
emits a few messages and then doesn't emit any more messages for
a long time. Generally, what's happening is either that the
system is taking a long time to apply WAL, or it's taking a
long time to reset unlogged relations, or it's taking a long
time to fsync the data directory, but it's not easy to tell
which is the case.
To fix that, add a new 'log_startup_progress_interval' setting,
by default 10s. When an operation that is known to be potentially
long-running takes more than this amount of time, we'll log a
status update each time this interval elapses.
To avoid undesirable log chatter, don't log anything about WAL
replay when in standby mode.
Nitin Jadhav and Robert Haas, reviewed by Amul Sul, Bharath
Rupireddy, Justin Pryzby, Michael Paquier, and Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmoaHQrgDFOBwgY16XCoMtXxsrVGFB2jNCvb7-ubuEe1MGg@mail.gmail.com
Discussion: https://postgr.es/m/CAMm1aWaHF7VE69572_OLQ+MgpT5RUiUDgF1x5RrtkJBLdpRj3Q@mail.gmail.com
According to the comments, we initialize sendTimeLineIsHistoric
and sendTimeLine here for the benefit of WalSndSegmentOpen.
However, the only way that can happen is if logical_read_xlog_page
calls WALRead. And since logical_read_xlog_page initializes the
same global variables internally, we don't need to also do it here.
These initializations have been here since replication slots were
introduced in commit 858ec11858. They
were certainly useless at that time, too, because logical decoding
didn't yet exist then, and physical replication doesn't examine any
WAL at the time of slot creation. I haven't checked all the
intermediate versions, but I suspect there's no point at which
this code ever did anything useful.
To reduce future confusion, remove the code. Since there's no
functional defect, no back-patch.
Discussion: http://postgr.es/m/CA+TgmobSWzacEs+r6C-7DrOPDHoDar4i9gzxB3SCBr5qjnLmVQ@mail.gmail.com
All the code that runs in the startup process to write WAL records
before that's allowed generally is now consecutive, so there's no
reason to shut the facility to write WAL locally off and then turn
it on again three times in a row.
Unfortunately, this requires a slight kludge in the checkpointer,
which needs to separately enable writing WAL in order to write the
checkpoint record. Because that code might run in the same process
as StartupXLOG() if we are in single-user mode, we must save/restore
the state of the LocalXLogInsertAllowed flag. Hopefully, we'll be
able to eliminate this wart in further refactoring, but it's
not too bad anyway.
Amul Sul, with modifications by me.
Discussion: http://postgr.es/m/CAAJ_b97fysj6sRSQEfOHj-y8Jfd5uPqOgO74qast89B4WfD+TA@mail.gmail.com
This does a better job grouping related operations together, since
all of the WAL records that we need to write prior to allowing WAL
writes generally and written by a single uninterrupted stretch of code.
Since CleanupAfterArchiveRecovery() just (1) runs recovery_end_command,
(2) removes non-parent xlog files, and (3) archives any final partial
segment, this should be safe, because all of those things are pretty
much unrelated to the WAL record written by XLogReportParameters().
Amul Sul, per a suggestion from me
Discussion: http://postgr.es/m/CAAJ_b97fysj6sRSQEfOHj-y8Jfd5uPqOgO74qast89B4WfD+TA@mail.gmail.com
In selectnewtape(), use 'nOutputTapes' rather than 'nOutputRuns' in the
check for whether to start a new tape or to append a new run to an
existing tape. Until 'maxTapes' is reached, nOutputTapes is always equal
to nOutputRuns, so it doesn't change the logic, but it seems more logical
to compare # of tapes with # of tapes. Also, currently maxTapes is never
modified after the merging begins, but written this way, the code would
still work if it was. (Although the nOutputRuns == nOutputTapes assertion
would need to be removed and using nOutputRuns % nOutputTapes to
distribute the runs evenly across the tapes wouldn't do a good job
anymore).
Similarly in mergeruns(), change to USEMEM(state->tape_buffer_mem) to
account for the memory used for tape buffers. It's equal to availMem
currently, but tape_buffer_mem is more direct and future-proof. For
example, if we changed the logic to only allocate half of the remaining
memory to tape buffers, USEMEM(state->tape_buffer_mem) would still be
correct.
Coverity complained about these. Hopefully this patch helps it to
understand the logic better. Thanks to Tom Lane for initial analysis.
The command is supported for physical slots for now, and returns the
type of slot, its restart_lsn and its restart_tli.
This will be useful for an upcoming patch related to pg_receivewal, to
allow the tool to be able to stream from the position of a slot, rather
than the last WAL position flushed by the backend (as reported by
IDENTIFY_SYSTEM) if the archive directory is found as empty, which would
be an advantage in the case of switching to a different archive
locations with the same slot used to avoid holes in WAL segment
archives.
Author: Ronan Dunklau
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/18708360.4lzOvYHigE@aivenronan
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Using for a new database a template database with shared dependencies
that need to be copied over was causing a corruption of pg_shdepend
because of an off-by-one computation error of the index number used for
the values inserted with a slot.
Issue introduced by e3931d0. Monitoring the rest of the code, there are
no similar mistakes.
Reported-by: Sven Klemm
Author: Aleksander Alekseev
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TP0AowkUgNL6zcAK-s5HYsVHVBRWfu69FRubPpfwZGM9A@mail.gmail.com
Backpatch-through: 14
Commit 1b5d797cd4 intended to relax the lock level used to rename
indexes, but inadvertently allowed *any* relation to be renamed with a
lowered lock level, as long as the command is spelled ALTER INDEX.
That's undesirable for other relation types, so retry the operation with
the higher lock if the relation turns out not to be an index.
After this fix, ALTER INDEX <sometable> RENAME will require access
exclusive lock, which it didn't before.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Onder Kalaci <onderk@microsoft.com>
Discussion: https://postgr.es/m/PH0PR21MB1328189E2821CDEC646F8178D8AE9@PH0PR21MB1328.namprd21.prod.outlook.com
An update such as "UPDATE ... SET fld[n].subfld = whatever"
failed if the array elements were domains rather than plain
composites. That's because isAssignmentIndirectionExpr()
failed to cope with the CoerceToDomain node that would appear
in the expression tree in this case. The result would typically
be a crash, and even if we accidentally didn't crash, we'd not
correctly preserve other fields of the same array element.
Per report from Onder Kalaci. Back-patch to v11 where arrays of
domains came in.
Discussion: https://postgr.es/m/PH0PR21MB132823A46AA36F0685B7A29AD8BD9@PH0PR21MB1328.namprd21.prod.outlook.com
I think when I added this assertion (in commit 8f889b108), I was only
thinking of the use of transformExpressionList at top level of INSERT
and VALUES. But it's also called by transformRowExpr(), which can
certainly occur in an UPDATE targetlist, so it's inappropriate to
suppose that p_multiassign_exprs must be empty. Besides, since the
input is not expected to contain ResTargets, there's no reason it
should contain MultiAssignRefs either. Hence this code need not
be concerned about the state of p_multiassign_exprs, and we should
just drop the assertion.
Per bug #17236 from ocean_li_996. It's been wrong for years,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17236-3210de9bcba1d7ca@postgresql.org
The grammar of this command run on indexes with column names has always
been authorized by the parser, and it has never been documented.
Since 911e702, it is possible to define opclass parameters as of CREATE
INDEX, which actually broke the old case of ALTER INDEX/TABLE where
relation-level parameters n_distinct and n_distinct_inherited could be
defined for an index (see 76a47c0 and its thread where this point has
been touched, still remained unused). Attempting to do that in v13~
would cause the index to become unusable, as there is a new dedicated
code path to load opclass parameters instead of the relation-level ones
previously available. Note that it is possible to fix things with a
manual catalog update to bring the relation back online.
This commit disables this command for now as the use of column names for
indexes does not make sense anyway, particularly when it comes to index
expressions where names are automatically computed. One way to properly
support this case properly in the future would be to use column numbers
when it comes to indexes, in the same way as ALTER INDEX .. ALTER COLUMN
.. SET STATISTICS.
Partitioned indexes were already blocked, but not indexes. Some tests
are added for both cases.
There was some code in ANALYZE to enforce n_distinct to be used for an
index expression if the parameter was defined, but just remove it for
now until/if there is support for this (note that index-level parameters
never had support in pg_dump either, previously), so this was just dead
code.
Reported-by: Matthijs van der Vleuten
Author: Nathan Bossart, Michael Paquier
Reviewed-by: Vik Fearing, Dilip Kumar
Discussion: https://postgr.es/m/17220-15d684c6c2171a83@postgresql.org
Backpatch-through: 13
Failing to do that, any direct inserts/updates of those partitions
would fail to enforce the correct constraint, that is, one that
considers the new partition constraint of their parent table.
Backpatch to 10.
Reported by: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
Discussion: https://postgr.es/m/OS3PR01MB5718DA1C4609A25186D1FBF194089%40OS3PR01MB5718.jpnprd01.prod.outlook.com
The code for initializing the tapes on each merge iteration was skipped
in a parallel worker. I put the !WORKER(state) check in wrong place while
rebasing the patch.
That caused failures in the index build in 'multiple-row-versions'
isolation test, in multiple buildfarm members. On my laptop it was easier
to reproduce by building an index on a larger table, so that you got a
parallel sort more reliably.
The previous commit 65014000b3 changed the variable passed to elog
from an int64 to a size_t variable, but neglected to change the modifier
in the format string accordingly.
Per failure on buildfarm member lapwing.
The advantage of polyphase merge is that it can reuse the input tapes as
output tapes efficiently, but that is irrelevant on modern hardware, when
we can easily emulate any number of tape drives. The number of input tapes
we can/should use during merging is limited by work_mem, but output tapes
that we are not currently writing to only cost a little bit of memory, so
there is no need to skimp on them.
This makes sorts that need multiple merge passes faster.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
All the tape functions, like LogicalTapeRead and LogicalTapeWrite, now
take a LogicalTape as argument, instead of LogicalTapeSet+tape number.
You can create any number of LogicalTapes in a single LogicalTapeSet, and
you don't need to decide the number upfront, when you create the tape set.
This makes the tape management in hash agg spilling in nodeAgg.c simpler.
Discussion: https://www.postgresql.org/message-id/420a0ec7-602c-d406-1e75-1ef7ddc58d83%40iki.fi
Reviewed-by: Peter Geoghegan, Zhihong Yu, John Naylor
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
An extension may want to call GetSecurityLabel() on a shared object
before the shared relcaches are fully initialized. For instance, a
ClientAuthentication_hook might want to retrieve the security label on
a role.
Discussion: https://postgr.es/m/ecb7af0b26e3be1d96d291c8453a86f1f82d9061.camel@j-davis.com
Backpatch-through: 9.6
If a function-in-FROM laterally references the output of some sub-SELECT
earlier in the FROM clause, and we are able to flatten that sub-SELECT
into the outer query, the expression(s) copied into the function RTE
missed being processed by eval_const_expressions. This'd lead to trouble
and probable crashes at execution if such expressions contained
named-argument function call syntax or functions with defaulted arguments.
The bug is masked if the query contains any explicit JOIN syntax, which
may help explain why we'd not noticed.
Per bug #17227 from Bernd Dorn. This is an oversight in commit 7266d0997,
so back-patch to v13 where that came in.
Discussion: https://postgr.es/m/17227-5a28ed1512189fa4@postgresql.org
CreateOverwriteContrecordRecord(), UpdateFullPageWrites(),
PerformRecoveryXLogAction(), and CleanupAfterArchiveRecovery()
are moved somewhat later in StartupXLOG(). This is preparatory
work for a future patch that wants to allow recovery to end at one
time and only later start to allow WAL writes. To do that, it's
necessary to separate code that has to do with allowing WAL writes
from other things that need to happen simply because recovery is
ending, such as initializing shared memory data structures that
depend on information that might not be accurate before redo is
complete.
This commit does not achieve that goal, but it is a step in that
direction. For example, there are a few different bits of code that
write things into WAL once we have finished recovery, and with this
change, those bits of code are closer to each other than previously,
with fewer unrelated bits of code interspersed.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CAAJ_b97abMuq=470Wahun=aS1PHTSbStHtrjjPaD-C0YQ1AqVw@mail.gmail.com
Create a new function PerformRecoveryXLogAction() and move the
code which either writes an end-of-recovery record or requests a
checkpoint there.
Also create a new function CleanupAfterArchiveRecovery() to
perform a few tasks that we want to do after we've actually exited
archive recovery but before we start accepting new WAL writes.
More refactoring of this file is planned, but this commit is
just straightforward code movement to make StartupXLOG() a
little bit shorter and a little bit easier to understand.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CAAJ_b97abMuq=470Wahun=aS1PHTSbStHtrjjPaD-C0YQ1AqVw@mail.gmail.com
The code was freeing the name of the multirange type function stored in
the parse tree but it should not do that. Event triggers could for
example look at such a corrupted parsed tree with a ddl_command_end
event.
Author: Alex Kozhemyakin, Sergey Shinderuk
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/d5042d46-b9cd-6efb-219a-71ed0cf45bc8@postgrespro.ru
Backpatch-through: 14
Sometimes, we replace a symbolic link that we find in the data
directory with an actual directory within the tarfile that we
create. _tarWriteDir was responsible both for making this
substitution and also for writing the tar header for the
resulting directory into the tar file. Make it do only the first
of those things, and rename to convert_link_to_directory.
Substantially larger refactoring of this source file is planned,
but this little bit seemed to make sense to commit
independently.
Discussion: http://postgr.es/m/CA+Tgmobz6tuv5tr-WxURe5JA1vVcGz85k4kkvoWxcyHvDpEqFA@mail.gmail.com
Previously when pg_log_backend_memory_contexts() sent the request to
the autovacuum launcher, it could take more than several seconds to
log its memory contexts. Because the function (HandleAutoVacLauncherInterrupts)
to process any new interrupts that autovacuum launcher received
didn't handle the request for logging of memory contexts. This commit changes
the function so that it handles the request, to make autovacuum launcher
more responsitve to pg_log_backend_memory_contexts().
Back-patch to v14 where pg_log_backend_memory_contexts() was added.
Author: Koyu Tanigawa
Reviewed-by: Bharath Rupireddy, Atsushi Torikoshi
Discussion: https://postgr.es/m/0aae3e074face409b35153451be5cc11@oss.nttdata.com