Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
Previously, the code and documentation seem to have essentially
assumed than a call to pg_wal_replay_pause() would take place
immediately, but that's not the case, because we only check for a
pause in certain places. This means that a tool that uses this
function and then wants to do something else afterward that is
dependent on the pause having taken effect doesn't know how long it
needs to wait to be sure that no more WAL is going to be replayed.
To avoid that, add a new function pg_get_wal_replay_pause_state()
which returns either 'not paused', 'paused requested', or 'paused'.
After calling pg_wal_replay_pause() the status will immediate change
from 'not paused' to 'pause requested'; when the startup process
has noticed this, the status will change to 'pause'. For backward
compatibility, pg_is_wal_replay_paused() still exists and returns
the same thing as before: true if a pause has been requested,
whether or not it has taken effect yet; and false if not.
The documentation is updated to clarify.
To improve the changes that a pause request is quickly confirmed
effective, adjust things so that WaitForWALToBecomeAvailable will
swiftly reach a call to recoveryPausesHere() when a pause request
is made.
Dilip Kumar, reviewed by Simon Riggs, Kyotaro Horiguchi, Yugo Nagata,
Masahiko Sawada, and Bharath Rupireddy.
Discussion: http://postgr.es/m/CAFiTN-vcLLWEm8Zr%3DYK83rgYrT9pbC8VJCfa1kY9vL3AUPfu6g%40mail.gmail.com
Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
Commit 1eb6d6527a allowed to track replica origin replay progress for 2PC
but it was not complete. It misses to properly track the progress for
rollback prepared especially it missed updating the code for recovery.
Additionally, we need to allow tracking it on subscriber nodes where
wal_level might not be logical.
It is required to track decoding of 2PC which is committed in PG14
(a271a1b50e) and also nobody complained about this till now so not
backpatching it.
Author: Amit Kapila
Reviewed-by: Michael Paquier and Ajin Cherian
Discussion: https://postgr.es/m/CAA4eK1L-kHmMnSdrRW6UhRbCjR7cgh04c+6psY15qzT6ktcd+g@mail.gmail.com
Commit 46d6e5f567 added the atomic variable "waitStart" into PGPROC struct,
to store the time at which wait for lock acquisition started. Previously
this variable was initialized every time each backend started. Instead,
this commit makes postmaster initialize it at the startup, to ensure that
the variable should be initialized before any use of it.
This commit also moves the code to initialize "waitStart" variable for
prepare transaction, from TwoPhaseGetDummyProc() to MarkAsPreparingGuts().
Because MarkAsPreparingGuts() is more proper place to do that since
it initializes other PGPROC variables.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/1df88660-6f08-cc6e-b7e2-f85296a2bdab@oss.nttdata.com
This commit fixes COMMIT AND CHAIN command so that it starts new transaction
immediately even if savepoints are defined within the transaction to commit.
Previously COMMIT AND CHAIN command did not in that case because
commit 280a408b48 forgot to make CommitTransactionCommand() handle
a transaction chaining when the transaction state was TBLOCK_SUBCOMMIT.
Also this commit adds the regression test for COMMIT AND CHAIN command
when savepoints are defined.
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Fujii Masao
Reviewed-by: Arthur Nascimento, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
pg_standby was useful more than a decade ago, but now it is obsolete.
It has been proposed that we retire it many times. Now seems like a
good time to finally do it, because "waiting restore commands"
are incompatible with a proposed recovery prefetching feature.
Discussion: https://postgr.es/m/20201029024412.GP5380%40telsasoft.com
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Since the CLOG page number is not recorded directly in the checkpoint
record, we have to use ShmemVariableCache->nextXid to figure out the
latest CLOG page number at the start of recovery. However, as recovery
progresses, replay of CLOG/EXTEND records will update our notion of
the latest page number, and we should rely on that being accurate
rather than recomputing the value based on an updated notion of
nextXid. ShmemVariableCache->nextXid is only an approximation
during recovery anyway, whereas CLOG/EXTEND records are an
authoritative representation of how the SLRU has been updated.
Commit 0fcc2decd4 makes this
simplification possible, as before that change clog_redo() might
have injected a bogus value here, and we'd want to get rid of
that before entering normal running.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
The comment is no longer accurate, and hasn't been entirely accurate
since Hot Standby was introduced. The original idea here was that
StartupCLOG() wouldn't be called until the end of recovery and
therefore this value would be uninitialized when this code is reached,
but Hot Standby made that true only when hot_standby=off, and commit
1f113abdf8 means that this value is now
always initialized before replay even starts.
The original purpose of this code was to bypass the sanity check
in SimpleLruTruncate(), which will no longer occur: now, if something
is wrong, that sanity check might trip during recovery. That's
probably a good thing, because in the current code base
latest_page_number should always be initialized and therefore we
expect that the sanity check should pass. If it doesn't, something
has gone wrong, and complaining about it is appropriate.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
Previously, the hot_standby=off code path did this at end of recovery,
while the hot_standby=on code path did it at the beginning of recovery.
It's better to do this in only one place because (a) it's simpler,
(b) StartupCLOG() is trivial so trying to postpone the work isn't
useful, and (c) this will make it possible to simplify some other
logic.
Patch by me, reviewed by Heikki Linnakangas.
Discussion: http://postgr.es/m/CA+TgmoZYig9+AQodhF5sRXuKkJ=RgFDugLr3XX_dz_F-p=TwTg@mail.gmail.com
Up until now, we've held this lock when performing a checkpoint or
restartpoint, but commit 076a055acf back
in 2004 and commit 7e48b77b1c from 2009,
taken together, have removed all need for this. In the present code,
there's only ever one process entitled to attempt a checkpoint: either
the checkpointer, during normal operation, or the postmaster, during
single-user operation. So, we don't need the lock.
One possible concern in making this change is that it means that
a substantial amount of code where HOLD_INTERRUPTS() was previously
in effect due to the preceding LWLockAcquire() will now be
running without that. This could mean that ProcessInterrupts()
gets called in places from which it didn't before. However, this
seems unlikely to do very much, because the checkpointer doesn't
have any signal mapped to die(), so it's not clear how,
for example, ProcDiePending = true could happen in the first
place. Similarly with ClientConnectionLost and recovery conflicts.
Also, if there are any such problems, we might want to fix them
rather than reverting this, since running lots of code with
interrupt handling suspended is generally bad.
Patch by me, per an inquiry by Amul Sul. Review by Tom Lane
and Michael Paquier.
Discussion: http://postgr.es/m/CAAJ_b97XnBBfYeSREDJorFsyoD1sHgqnNuCi=02mNQBUMnA=FA@mail.gmail.com
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
This patch changes this behavior for hot standbys to pause recovery at
that point instead. That allows read traffic on the standby to
continue while database administrators figure out next steps. When
recovery is unpaused, the server shuts down (as before). The idea is
to fix the parameters while recovery is paused and then restart when
there is a maintenance window.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
Instead of making many block-sized write() calls to fill a new WAL file
with zeroes, make a smaller number of pwritev() calls (or various
emulations). The actual number depends on the OS's IOV_MAX, which
PG_IOV_MAX currently caps at 32. That means we'll write 256kB per call
on typical systems. We may want to tune the number later with more
experience.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
Revert ac22929a26, as well as the followup fix 113d3591b8. Because it broke
the assumption that the startup process waiting for the recovery conflict
on buffer pin should be waken up only by buffer unpin or the timeout enabled
in ResolveRecoveryConflictWithBufferPin(). It caused, for example,
SIGHUP signal handler or walreceiver process to wake that startup process
up unnecessarily frequently.
Additionally, add the comments about why that dedicated latch that
the reverted patch tried to get rid of should not be removed.
Thanks to Kyotaro Horiguchi for the discussion.
Author: Fujii Masao
Discussion: https://postgr.es/m/d8c0c608-021b-3c73-fffd-3240829ee986@oss.nttdata.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
This is done for end-of-recovery and shutdown checkpoints/restartpoints
(end-of-recovery restartpoints don't exist) rather than all types of
checkpoints, in cases where it may not be possible to rely on
pg_stat_activity to get a status from the startup or checkpointer
processes.
For example, at the end of a crash recovery, this is useful to know if a
checkpoint is running in the startup process, while previously the ps
display may only show some information about "recovering" something,
that can be confusing while a checkpoint runs.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kirk Jamison, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200818225238.GP17022@telsasoft.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
Previously, when restore_command claimed to succeed but failed to restore
the file with the right name, for example, due to mis-configuration of
restore_command, no log message was reported. Then the recovery failed
later with an error message not directly related to the issue.
This commit changes the recovery so that a log message is emitted in
this error case. This would enable us to investigate what happened in
this case more easily.
Author: Jeff Janes, Fujii Masao
Reviewed-by: Pavel Borisov, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAMkU=1xkFs3Omp4JR4wMYWdam_KLuj6LXnTYfU8u3T0h=PLLMQ@mail.gmail.com
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
Commit dee663f7 intended to drop any queued up fsync requests before
unlinking segment files, but missed a code path. Fix, by centralizing
the forget-and-unlink code into a single function.
Reported-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/20201104013205.icogbi773przyny5%40development
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Providing this information can be useful for example when diagnosing
problems related to recovery conflicts or for recovery issues without
having to go through the output generated by pg_waldump to get some
information about the blocks a WAL record works on.
The block information is printed in the same format as pg_waldump. This
already existed in xlog.c for debugging purposes with -DWAL_DEBUG, so
adding the block information in the callback has required just a small
refactoring.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/c31e2cba-efda-762c-f4ad-5c25e5dac3d0@amazon.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
Existing code used various inconsistent ways to printf struct stat's
st_size member. The type of that is off_t, which is in most cases a
signed 64-bit integer, so use the long long int format for it.
Harmonize behavior by moving reponsibility for fsyncing directories down
into slru.c. In 10 and later, only the multixact directories were
missed (see commit 1b02be21), and in older branches all SLRUs were
missed.
Back-patch to all supported releases.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLtsTUOScnNoSMZ-2ZLv%2BwGh01J6kAo_DM8mTRq1sKdSQ%40mail.gmail.com
This adds a new optional support function to the GiST access method:
sortsupport. If it is defined, the GiST index is built by sorting all data
to the order defined by the sortsupport's comparator function, and packing
the tuples in that order to GiST pages. This is similar to how B-tree
index build works, and is much faster than inserting the tuples one by
one. The resulting index is smaller too, because the pages are packed more
tightly, upto 'fillfactor'. The normal build method works by splitting
pages, which tends to lead to more wasted space.
The quality of the resulting index depends on how good the opclass-defined
sort order is. A good order preserves locality of the input data.
As the first user of this facility, add 'sortsupport' function to the
point_ops opclass. It sorts the points in Z-order (aka Morton Code), by
interleaving the bits of the X and Y coordinates.
Author: Andrey Borodin
Reviewed-by: Pavel Borisov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/1A36620E-CAD8-4267-9067-FB31385E7C0D%40yandex-team.ru
When reading a WAL record fails to find continuation record(s) of the
proper length, report what it expects, for clarity.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200903212152.GA15319@alvherre.pgsql
If a commit or abort record includes "dropped relfilenodes", then replaying
the record will remove data files. That is surely a "special rel update",
but the records were not marked as such. Fix that, teach pg_rewind to
expect and ignore them, and add a test case to cover it.
It's always been like this, but no backporting for fear of breaking
existing applications. If an application parsed the WAL but was not
handling commit/abort records, it would stop working. That might be a good
thing if it really needed to handle the dropped rels, but it will be caught
when the application is updated to work with PostgreSQL v14 anyway.
Discussion: https://www.postgresql.org/message-id/07b33e2c-46a6-86a1-5f9e-a7da73fddb95%40iki.fi
Reviewed-by: Amit Kapila, Michael Paquier
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
Similar to the previous changes this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. In many
workloads subtransactions are very rare, and this makes the check for
that considerably cheaper.
As this removes the last member of PGXACT, there is no need to keep it
around anymore.
On a larger 2 socket machine this and the two preceding commits result
in a ~1.07x performance increase in read-only pgbench. For read-heavy
mixed r/w workloads without row level contention, I see about 1.1x.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The new array contains the xids for all connected backends / in-use
PGPROC entries in a dense manner (in contrast to the PGPROC/PGXACT
arrays which can have unused entries interspersed).
This improves performance because GetSnapshotData() always needs to
scan the xids of all live procarray entries and now there's no need to
go through the procArray->pgprocnos indirection anymore.
As the set of running top-level xids changes rarely, compared to the
number of snapshots taken, this substantially increases the likelihood
of most data required for a snapshot being in l2 cache. In
read-mostly workloads scanning the xids[] array will sufficient to
build a snapshot, as most backends will not have an xid assigned.
To keep the xid array dense ProcArrayRemove() needs to move entries
behind the to-be-removed proc's one further up in the array. Obviously
moving array entries cannot happen while a backend sets it
xid. I.e. locking needs to prevent that array entries are moved while
a backend modifies its xid.
To avoid locking ProcArrayLock in GetNewTransactionId() - a fairly hot
spot already - ProcArrayAdd() / ProcArrayRemove() now needs to hold
XidGenLock in addition to ProcArrayLock. Adding / Removing a procarray
entry is not a very frequent operation, even taking 2PC into account.
Due to the above, the dense array entries can only be read or modified
while holding ProcArrayLock and/or XidGenLock. This prevents a
concurrent ProcArrayRemove() from shifting the dense array while it is
accessed concurrently.
While the new dense array is very good when needing to look at all
xids it is less suitable when accessing a single backend's xid. In
particular it would be problematic to have to acquire a lock to access
a backend's own xid. Therefore a backend's xid is not just stored in
the dense array, but also in PGPROC. This also allows a backend to
only access the shared xid value when the backend had acquired an
xid.
The infrastructure added in this commit will be used for the remaining
PGXACT fields in subsequent commits. They are kept separate to make
review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Now that xmin isn't needed for GetSnapshotData() anymore, it leads to
unnecessary cacheline ping-pong to have it in PGXACT, as it is updated
considerably more frequently than the other PGXACT members.
After the changes in dc7420c2c9, this is a very straight-forward change.
For highly concurrent, snapshot acquisition heavy, workloads this change alone
can significantly increase scalability. E.g. plain pgbench on a smaller 2
socket machine gains 1.07x for read-only pgbench, 1.22x for read-only pgbench
when submitting queries in batches of 100, and 2.85x for batches of 100
'SELECT';. The latter numbers are obviously not to be expected in the
real-world, but micro-benchmark the snapshot computation
scalability (previously spending ~80% of the time in GetSnapshotData()).
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
We have edge-case bugs when assigning values in the last few dozen pages
before the wrap limit. We may introduce similar bugs in the future. At
default BLCKSZ, this makes such bugs unreachable outside of single-user
mode. Also, when VACUUM began to consume mxacts, multiStopLimit did not
change to compensate.
pg_upgrade may fail on a cluster that was already printing "must be
vacuumed" warnings. Follow the warning's instructions to clear the
warning, then run pg_upgrade again. One can still, peacefully consume
98% of XIDs or mxacts, so DBAs need not change routine VACUUM settings.
Discussion: https://postgr.es/m/20200621083513.GA3074645@rfd.leadboat.com
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
The logical decoding infrastructure needs to know which top-level
transaction the subxact belongs to, in order to decode all the
changes. Until now that might be delayed until commit, due to the
caching (GPROC_MAX_CACHED_SUBXIDS), preventing features requiring
incremental decoding.
So we also write the assignment info into WAL immediately, as part
of the next WAL record (to minimize overhead) only when wal_level=logical.
We can not remove the existing XLOG_XACT_ASSIGNMENT WAL as that is
required for avoiding overflow in the hot standby snapshot.
Bump XLOG_PAGE_MAGIC, since this introduces XLR_BLOCK_ID_TOPLEVEL_XID.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Remove previous hack in KeepLogSeg that added a case to deal with a
(badly represented) invalid segment number. This was added for the sake
of GetWALAvailability. But it's not needed if in that function we
initialize the segment number to be retreated to the currently being
written segment, so do that instead.
Per valgrind-running buildfarm member skink, and some sparc64 animals.
Discussion: https://postgr.es/m/1724648.1594230917@sss.pgh.pa.us
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
Since slot_keep_segs indicates the number of WAL segments not LSN,
its datatype should not be XLogRecPtr.
Back-patch to v13 where this issue was added.
Reported-by: Atsushi Torikoshi
Author: Atsushi Torikoshi, tweaked by Fujii Masao
Discussion: https://postgr.es/m/ebd0d674f3e050222238a960cac5251a@oss.nttdata.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
The current definition is dangerous. No bugs exist in our code at
present, but backpatch to 11 nonetheless where it was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
The function has been reading global variable forceSyncCommit, mirroring
the intent of the caller that passed forceSync=forceSyncCommit. The
other caller, RecordTransactionCommitPrepared(), passed false. Since
COMMIT PREPARED can't share a transaction with any command, it certainly
doesn't share a transaction with a command that sets forceSyncCommit.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20200617032615.GC2916904@rfd.leadboat.com
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
There is little point in using the LWLockRegisterTranche mechanism for
built-in tranche names. It wastes cycles, it creates opportunities for
bugs (since failing to register a tranche name is a very hard-to-detect
problem), and the lack of any centralized list of names encourages
sloppy nonconformity in name choices. Moreover, since we have a
centralized list of the tranches anyway in enum BuiltinTrancheIds, we're
certainly not buying any flexibility in return for these disadvantages.
Hence, nuke all the backend-internal LWLockRegisterTranche calls,
and instead provide a const array of the builtin tranche names.
(I have in mind to change a bunch of these names shortly, but this
patch is just about getting them into one place.)
Discussion: https://postgr.es/m/9056.1589419765@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
Tom Lane
Fujii Masao
Thomas Munro
Robert Haas
Amit Kapila
Michael Paquier
Peter Eisentraut
Noah Misch
Alvaro Herrera
Bruce Momjian
Heikki Linnakangas
David Rowley
Andres Freund
Peter Geoghegan