explicitly. This means a TOAST pointer takes 18 bytes instead of 17 --- still
smaller than in 8.2 --- which seems a good tradeoff to ensure we won't have
painted ourselves into a corner if we want to support multiple types of TOAST
pointer later on. Per discussion with Greg Stark.
recovery stop time was used. This avoids a corner-case risk of trying to
overwrite an existing archived copy of the last WAL segment, and seems
simpler and cleaner all around than the original definition. Per example
from Jon Colverson and subsequent analysis by Simon.
databases with encodings that are incompatible with the server's LC_CTYPE
locale, when we can determine that (which we can on most modern platforms,
I believe). C/POSIX locale is compatible with all encodings, of course,
so there is still some usefulness to CREATE DATABASE's ENCODING option,
but this will insulate us against all sorts of recurring complaints
caused by mismatched settings.
I moved initdb's existing LC_CTYPE-to-encoding mapping knowledge into
a new src/port/ file so it could be shared by CREATE DATABASE.
the same transaction can be identified even when no regular XID was assigned.
This seems essential after addition of the lazy-XID patch. Also some
minor code cleanup in write_csvlog().
- create a separate archive_mode GUC, on which archive_command is dependent
- %r option in recovery.conf sends last restartpoint to recovery command
- %r used in pg_standby, updated README
- minor other code cleanup in pg_standby
- doc on Warm Standby now mentions pg_standby and %r
- log_restartpoints recovery option emits LOG message at each restartpoint
- end of recovery now displays last transaction end time, as requested
by Warren Little; also shown at each restartpoint
- restart archiver if needed to carry away WAL files at shutdown
Simon Riggs
buffers that cannot possibly need to be cleaned, and estimates how many
buffers it should try to clean based on moving averages of recent allocation
requests and density of reusable buffers. The patch also adds a couple
more columns to pg_stat_bgwriter to help measure the effectiveness of the
bgwriter.
Greg Smith, building on his own work and ideas from several other people,
in particular a much older patch from Itagaki Takahiro.
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
unpruned XMAX in its header. At the cost of 4 bytes per page, this keeps us
from performing heap_page_prune when there's no chance of pruning anything.
Seems to be necessary per Heikki's preliminary performance testing.
> * -Consider shrinking expired tuples to just their headers
> * -Allow heap reuse of UPDATEd rows if no indexed columns are changed,
> and old and new versions are on the same heap page
Not needed anymore:
< * Reuse index tuples that point to heap tuples that are not visible to
< anyone?
columns, and the new version can be stored on the same heap page, we no longer
generate extra index entries for the new version. Instead, index searches
follow the HOT-chain links to ensure they find the correct tuple version.
In addition, this patch introduces the ability to "prune" dead tuples on a
per-page basis, without having to do a complete VACUUM pass to recover space.
VACUUM is still needed to clean up dead index entries, however.
Pavan Deolasee, with help from a bunch of other people.
database via builtin functions, as recently discussed on -hackers.
chr() now returns a character in the database encoding. For UTF8 encoded databases
the argument is treated as a Unicode code point. For other multi-byte encodings
the argument must designate a strict ascii character, or an error is raised,
as is also the case if the argument is 0.
ascii() is adjusted so that it remains the inverse of chr().
The two argument form of convert() is gone, and the three argument form now
takes a bytea first argument and returns a bytea. To cover this loss three new
functions are introduced:
. convert_from(bytea, name) returns text - converts the first argument from the
named encoding to the database encoding
. convert_to(text, name) returns bytea - converts the first argument from the
database encoding to the named encoding
. length(bytea, name) returns int - gives the length of the first argument in
characters in the named encoding
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
(Actually, it works as a plain statement too, but I didn't document that
because it seems a bit useless.) Unify VariableResetStmt with
VariableSetStmt, and clean up some ancient cruft in the representation of
same.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
but just hardwire the specified timezone database path into the executable.
Per discussion, this avoids some packaging disadvantages of using a
symlink.
This prevents needing to do complex and poorly-defined updates of the
mapping table if the new parser has different token types than the old.
Per discussion.
init options of the template as top-level options in the syntax. This also
makes ALTER a bit easier to use, since options can be replaced individually.
I also made these statements verify that the tmplinit method will accept
the new settings before they get stored; in the original coding you didn't
find out about mistakes until the dictionary got invoked.
Under the hood, init methods now get options as a List of DefElem instead
of a raw text string --- that lets tsearch use existing options-pushing code
instead of duplicating functionality.
pages for the new SQL commands. I also committed Bruce's text search
introductory chapter, as-is except for fixing some markup errors,
so that there would be a place for the reference pages to link to.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
> A third idea would be for a heap scan to check if all rows are visible
> and if so set a per-table flag which can be checked by index scans.
> Any change to the table would have to clear the flag. To detect
> changes during the heap scan a counter could be set at the start and
> checked at the end --- if it is the same, the table has not been
> modified --- any table change would increment the counter.
certain corner cases. Per discussion, the code does what we want, but
it really needs to be documented that these functions act differently
from regexp_matches.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
displayed in the postmaster log. This avoids Windows-specific problems with
localized time zone names that are in the wrong encoding, and generally seems
like a good idea to forestall other potential platform-dependent issues.
To preserve the existing behavior that all backends will log in the same time
zone, create a new GUC variable log_timezone that can only be changed on a
system-wide basis, and reference log-related calculations to that zone instead
of the TimeZone variable.
This fixes the issue reported by Hiroshi Saito that timestamps printed by
xlog.c startup could be improperly localized on Windows. We still need a
simpler patch for that problem in the back branches, however.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
sugar for PL/PgSQL set-returning functions that want to return the result
of evaluating a query; it should also be more efficient than repeated
RETURN NEXT statements. Based on an earlier patch from Pavel Stehule.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
I/O utilization, per discussion.
While at it, lower the autovacuum vacuum and analyze threshold values to 50
tuples. It is a bit higher (i.e. more conservative) than what I originally
proposed but much better than the old values for small tables.
against a Unix server, and Windows-specific server-side authentication
using SSPI "negotiate" method (Kerberos or NTLM).
Only builds properly with MSVC for now.
name. With this patch, it is always possible for the user to qualify a
plpgsql variable name if needed to avoid ambiguity. While there is much more
work to be done in this area, this simple change removes one unnecessary
incompatibility with Oracle. Per discussion.
of variable substitution and plan caching behavior in dedicated sections.
(A lot of this material existed already, but was scattered in various places
in the chapter.) Reorganize material a little bit, mostly to try to avoid
diving into deep details in the first introductory sections. Document some
fine points that had escaped treatment before, notably the ability to qualify
plpgsql variable names with block labels. Some minor wordsmithing here and
there.
literally, whether quoted or not. Since we allow $ as a character within
identifiers, this behavior is useful, whereas the previous behavior of
treating it as the regexp ending anchor was nearly useless given that the
pattern is automatically anchored anyway. This affects the arguments of
psql's \d commands as well as pg_dump's -n and -t switches. Per discussion.
PGconn. Invent a new libpq connection-status function,
PQconnectionUsedPassword() that returns true if the server
demanded a password during authentication, false otherwise.
This may be useful to clients in general, but is immediately
useful to help plug a privilege escalation path in dblink.
Per list discussion and design proposed by Tom Lane.
Sequences and views could previously be renamed using ALTER TABLE, but
this was a repeated source of confusion for users. Update the docs,
and psql tab completion. Patch from David Fetter; various minor fixes
by myself.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
installations whose pg_config program does not appear first in the PATH.
Per gripe from Eddie Stanley and subsequent discussions with Fabien Coelho
and others.
provide visual separation from the rest of the log line; I've been
noticing lately that quite a few newbies fail to figure this out for
themselves. Also a little editorial cleanup of the log_line_prefix
description.
constraints the planner is unable to disprove, hence simple btree-compatible
conditions should be used. We've seen people try to get cute with stuff
like date_part(something) = something at least twice now. Even if we
wanted to try to teach predtest.c about the properties of date_part,
most of the useful variants aren't immutable so nothing could be proved.
within a signal handler (this might be safe given the relatively narrow code
range in which the interrupt is enabled, but it seems awfully risky); do issue
more informative log messages that tell what is being waited for and the exact
length of the wait; minor other code cleanup. Greg Stark and Tom Lane
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
with a plpgsql-defined cursor. The underlying mechanism for this is that the
main SQL engine will now take "WHERE CURRENT OF $n" where $n is a refcursor
parameter. Not sure if we should document that fact or consider it an
implementation detail. Per discussion with Pavel Stehule.
Bruce Momjian
Magnus Hagander
Tom Lane
Neil Conway
Alvaro Herrera
Andrew Dunstan
Tatsuo Ishii
Peter Eisentraut
Joe Conway