PostgreSQL on Windows 8 or Windows Server 2012 will now
get high-resolution timestamps by dynamically loading the
GetSystemTimePreciseAsFileTime function. It'll fall back to
to GetSystemTimeAsFileTime if the higher precision variant
isn't found, so the same binaries without problems on older
Windows releases.
No attempt is made to detect the Windows version. Only the
presence or absence of the desired function is considered.
Craig Ringer
PostgreSQL was calling GetSystemTime followed by SystemTimeToFileTime in the
win32 port gettimeofday function. This is not necessary and limits the reported
precision to the 1ms granularity that the SYSTEMTIME struct can represent. By
using GetSystemTimeAsFileTime we avoid unnecessary conversions and capture
timestamps at 100ns granularity, which is then rounded to 1µs granularity for
storage in a PostgreSQL timestamp.
On most Windows systems this change will actually have no significant effect on
timestamp resolution as the system timer tick is typically between 1ms and 15ms
depending on what timer resolution currently running applications have
requested. You can check this with clockres.exe from sysinternals. Despite the
platform limiation this change still permits capture of finer timestamps where
the system is capable of producing them and it gets rid of an unnecessary
syscall.
The higher resolution GetSystemTimePreciseAsFileTime call available on Windows
8 and Windows Server 2012 has the same interface as GetSystemTimeAsFileTime, so
switching to GetSystemTimeAsFileTime makes it easier to use the Precise variant
later.
Craig Ringer, reviewed by David Rowley
Generate a table_rewrite event when ALTER TABLE
attempts to rewrite a table. Provide helper
functions to identify table and reason.
Intended use case is to help assess or to react
to schema changes that might hold exclusive locks
for long periods.
Dimitri Fontaine, triggering an edit by Simon Riggs
Reviewed in detail by Michael Paquier
Rename parameter action_at_recovery_target to
recovery_target_action suggested by Christoph Berg.
Place into recovery.conf suggested by Fujii Masao,
replacing (deprecating) earlier parameters, per
Michael Paquier.
Used to say just "could not read password from file "...": Success", which
isn't very informative.
Mats Erik Andersson. Backpatch to all supported versions.
The "file mode" bits in the tar file header is not supposed to include the
file type bits, e.g. S_IFREG or S_IFDIR. The file type is stored in a
separate field. This isn't a problem in practice, all tar programs ignore
the extra bits, but let's be tidy.
This came up in a discussion around bug #11949, reported by Hendrik Grewe,
although this doesn't fix the issue with tar --append. That turned out to be
a bug in GNU tar. Schilly's tartest program revealed this defect in the tar
created by pg_basebackup.
This problem goes as far as we we've had pg_basebackup, but since this
hasn't caused any problems in practice, let's be conservative and fix in
master only.
It was an oversight in the original commit.
Also note in the sample config file that changing wal_log_hints requires a
restart.
Michael Paquier. Backpatch to 9.4, where wal_log_hints was added.
PGXS computes srcdir from VPATH, PostgreSQL proper computes VPATH from
srcdir, and doing both results in an error from make. Conditionalize so
only one of these takes effect.
These changes were originally submitted as "adds support for VPATH with
USE_PGXS", but they are not necessary for VPATH support, so they just
add more lines of code for no reason.
dblink and postgres_fdw use SHLIB_PREREQS = submake-libpq to build libpq
first. This doesn't work in a PGXS build, because there is no libpq to
build. So just omit setting SHLIB_PREREQS in this case.
Note that PGXS users can still use SHLIB_PREREQS (although it is not
documented). The problem here is only that contrib modules can be built
in-tree or using PGXS, and the prerequisite is only applicable in the
former case.
Commit 6697aa2bc2 previously attempted to
address this by creating a somewhat fake submake-libpq target in
Makefile.global. That was not the right fix, and it was also done in a
nonportable way, so revert that.
Since this is not something that a user should change,
pg_config_manual.h was an inappropriate place for it.
In initdb.c, remove the use of the macro, because utils/guc.h can't be
included by non-backend code. But we hardcode all the other
configuration file names there, so this isn't a disaster.
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
check-world failed in a completely clean tree, because src/test/modules
fail to build unless errcodes.h is generated first. To fix this,
install a dependency in src/test/modules' Makefile so that the necessary
file is generated. Even with this, running "make check" within
individual module subdirs will still fail because the dependency is not
considered there, but this case is less interesting and would be messier
to fix.
check-world still failed with the above fix in place, this time because
dummy_seclabel used LOAD to load the dynamic library, which doesn't work
because the @libdir@ (expanded by the makefile) is expanded to the final
install path, not the temporary installation directory used by make
check. To fix, tweak things so that CREATE EXTENSION can be used
instead, which solves the problem because the library path is expanded
by the backend, which is aware of the true libdir.
Make the error messages issued by array_in() uniformly follow the style
ERROR: malformed array literal: "actual input string"
DETAIL: specific complaint here
and rewrite many of the specific complaints to be clearer.
The immediate motivation for doing this is a complaint from Josh Berkus
that json_to_record() produced an unintelligible error message when
dealing with an array item, because it tries to feed the JSON-format
array value to array_in(). Really it ought to be smart enough to
perform JSON-to-Postgres array conversion, but that's a future feature
not a bug fix. In the meantime, this change is something we agreed
we could back-patch into 9.4, and it should help de-confuse things a bit.
The logical decoding patchset introduced PROC_IN_LOGICAL_DECODING flag
PGXACT flag, that allows such backends to be skipped when computing
the xmin horizon/snapshots. That's fine and sensible for walsenders
streaming out logical changes, but not at all fine for SQL backends
doing logical decoding. If the latter set that flag any change they
have performed outside of logical decoding will not be regarded as
visible - which e.g. can lead to that change being vacuumed away.
Note that not setting the flag for SQL backends isn't particularly
bothersome - the SQL backend doesn't do streaming, so it only runs for
a limited amount of time.
Per buildfarm member 'tick' and Alvaro.
Backpatch to 9.4, where logical decoding was introduced.
Davide S. reported that json_agg() sometimes produced multiple trailing
right brackets. This turns out to be because json_agg_finalfn() attaches
the final right bracket, and was doing so by modifying the aggregate state
in-place. That's verboten, though unfortunately it seems there's no way
for nodeAgg.c to check for such mistakes.
Fix that back to 9.3 where the broken code was introduced. In 9.4 and
HEAD, likewise fix json_object_agg(), which had copied the erroneous logic.
Make some cosmetic cleanups as well.
Get rid of PG_FUNCTION_INFO_V1() macros, which are quite inappropriate
for built-in functions (possibly leftovers from testing as a loadable
module?). Also, fix gratuitous inconsistency between SQL-level and
C-level names of the minmax support functions.
We were not checking to see if the supplied dscale was valid for the given
digit array when receiving binary-format numeric values. While dscale can
validly be more than the number of nonzero fractional digits, it shouldn't
be less; that case causes fractional digits to be hidden on display even
though they're there and participate in arithmetic.
Bug #12053 from Tommaso Sala indicates that there's at least one broken
client library out there that sometimes supplies an incorrect dscale value,
leading to strange behavior. This suggests that simply throwing an error
might not be the best response; it would lead to failures in applications
that might seem to be working fine today. What seems the least risky fix
is to truncate away any digits that would be hidden by dscale. This
preserves the existing behavior in terms of what will be printed for the
transmitted value, while preventing subsequent arithmetic from producing
results inconsistent with that.
In passing, throw a specific error for the case of dscale being outside
the range that will fit into a numeric's header. Before you got "value
overflows numeric format", which is a bit misleading.
Back-patch to all supported branches.
Rather than have the core security_label regression test depend on the
dummy_seclabel module, have that part of the test be executed by
dummy_seclabel itself directly. This simplifies the testing rig a bit;
in particular it should silence the problems from the MSVC buildfarm
phylum, which haven't yet gotten taught how to install src/test/modules.
We expose a function IsValidJsonNumber that internally calls the lexer
for json numbers. That allows us to use the same test everywhere,
instead of inventing a broken test for hstore conversions. The new
function is also used in datum_to_json, replacing the code that is now
moved to the new function.
Backpatch to 9.3 where hstore_to_json_loose was introduced.
Extracted from pending inet selectivity patch. The rest of it isn't
quite ready to commit, but we might as well push this part so the patch
doesn't have to track the moving target of pg_operator.h.
Coverity complained that the "else" added to fillPGconn() was unreachable,
which it was. Remove the dead code. In passing, rearrange the tests so as
not to bother trying to fetch values for options that can't be assigned.
Pre-9.3 did not have that issue, but it did have a "return" that should be
"goto oom_error" to ensure that a suitable error message gets filled in.
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
Apart from ignoring "hostaddr" set to the empty string, this behaves
identically to its predecessor. Back-patch to 9.4, where the original
commit first appeared.
Reviewed by Fujii Masao.
This reverts commit 9f80f4835a. The
function returned the raw value of a connection parameter, a task served
by PQconninfo(). The next commit will reimplement the psql \conninfo
change that way. Back-patch to 9.4, where that commit first appeared.
The original definitions were leaving no room for cross-type operators,
so queries that compared a column of one type against something of a
different type were not taking advantage of the index. Fix by making
the opfamilies more like the ones for Btree, and include a few
cross-type operator classes.
Catalog version bumped.
Per complaints from Hubert Lubaczewski, Mark Wong, Heikki Linnakangas.
This patch adds a function that replaces a bms_membership() test followed
by a bms_singleton_member() call, performing both the test and the
extraction of a singleton set's member in one scan of the bitmapset.
The performance advantage over the old way is probably minimal in current
usage, but it seems worthwhile on notational grounds anyway.
David Rowley
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
This function was initially coded on the assumption that it would not be
performance-critical, but that turns out to be wrong in workloads that
are heavily dependent on the speed of plpgsql functions. Speed it up by
hard-coding the comparison rules, thereby avoiding palloc/pfree traffic
from creating and immediately freeing an OverrideSearchPath object.
Per report from Scott Marlowe.
Previously, if the typcache had for example tried and failed to find a hash
opclass for a given data type, it would nonetheless repeat the unsuccessful
catalog lookup each time it was asked again. This can lead to a
significant amount of useless bufmgr traffic, as in a recent report from
Scott Marlowe. Like the catalog caches, typcache should be able to cache
negative results. This patch arranges that by making use of separate flag
bits to remember whether a particular item has been looked up, rather than
treating a zero OID as an indicator that no lookup has been done.
Also, install a credible invalidation mechanism, namely watching for inval
events in pg_opclass. The sole advantage of the lack of negative caching
was that the code would cope if operators or opclasses got added for a type
mid-session; to preserve that behavior we have to be able to invalidate
stale lookup results. Updates in pg_opclass should be pretty rare in
production systems, so it seems sufficient to just invalidate all the
dependent data whenever one happens.
Adding proper invalidation also means that this code will now react sanely
if an opclass is dropped mid-session. Arguably, that's a back-patchable
bug fix, but in view of the lack of complaints from the field I'll refrain
from back-patching. (Probably, in most cases where an opclass is dropped,
the data type itself is dropped soon after, so that this misfeasance has
no bad consequences.)
InitXLogInsert() cannot be called in a critical section, because it
allocates memory. But CreateCheckPoint() did that, when called for the
end-of-recovery checkpoint by the startup process.
In the passing, fix the scratch space allocation in InitXLogInsert to go to
the right memory context. Also update the comment at InitXLOGAccess, which
hasn't been totally accurate since hot standby was introduced (in a hot
standby backend, InitXLOGAccess isn't called at backend startup).
Reported by Michael Paquier
Previously \watch always ignored the user's \pset null setting.
\pset null setting should be ignored for \d and similar queries.
For those, the code can reasonably have an opinion about what
the presentation should be like, since it knows what SQL query
it's issuing. This argument surely doesn't apply to \watch,
so this commit makes \watch use the user's \pset null setting.
Back-patch to 9.3 where \watch was added.
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
In passing, add an Assert defending the presumption that bytes_left
is positive to start with. (I'm not exactly convinced that using an
unsigned type was such a bright thing here, but let's at least do
this much.)
Add a bit of context sensitivity to plpgsql_yylex() so that it can
recognize when the word it is looking at is the first word of a new
statement, and if so whether it is the target of an assignment statement.
When we are at start of statement and it's not an assignment, we can
prefer recognizing unreserved keywords over recognizing variable names,
thereby allowing most statements' initial keywords to be demoted from
reserved to unreserved status. This is rather useful already (there are
15 such words that get demoted here), and what's more to the point is
that future patches proposing to add new plpgsql statements can avoid
objections about having to add new reserved words.
The keywords BEGIN, DECLARE, FOR, FOREACH, LOOP, WHILE need to remain
reserved because they can be preceded by block labels, and the logic
added here doesn't understand about block labels. In principle we
could probably fix that, but it would take more than one token of
lookback and the benefit doesn't seem worth extra complexity.
Also note I didn't de-reserve EXECUTE, because it is used in more places
than just statement start. It's possible it could be de-reserved with
more work, but that would be an independent fix.
In passing, also de-reserve COLLATE and DEFAULT, which shouldn't have
been reserved in the first place since they only need to be recognized
within DECLARE sections.
These cases formerly failed with errors about "could not find array type
for data type". Now they yield arrays of the same element type and one
higher dimension.
The implementation involves creating functions with API similar to the
existing accumArrayResult() family. I (tgl) also extended the base family
by adding an initArrayResult() function, which allows callers to avoid
special-casing the zero-inputs case if they just want an empty array as
result. (Not all do, so the previous calling convention remains valid.)
This allowed simplifying some existing code in xml.c and plperl.c.
Ali Akbar, reviewed by Pavel Stehule, significantly modified by me
Per discussion with Tom and Andrew, 64bit integers are no longer a
problem for the catalogs, so go ahead and add the mapping from the C
int64 type to the int8 SQL identification to allow using them.
Patch by Adam Brightwell
The old method of appending options to the connection string didn't work if
the primary_conninfo was a postgres:// style URI, instead of a traditional
connection string. Use PQconnectdbParams instead.
Alex Shulgin
If the "dbname" attribute in PQconnectDBParams contained a connection string
or URI (and expand_dbname = TRUE), the database name from the connection
string could not be overridden by a subsequent "dbname" keyword in the
array. That was not intentional; all other options can be overridden.
Furthermore, any subsequent "dbname" caused the connection string from the
first dbname value to be processed again, overriding any values for the same
options that were given between the connection string and the second dbname
option.
In the passing, clarify in the docs that only the first dbname option in the
array is parsed as a connection string.
Alex Shulgin. Backpatch to all supported versions.
In the regression tests, when doing cascaded drops, we need to suppress
the notices from DROP CASCADE or there can be transient regression
failures as the order of drops can depend on the physical row order in
pg_depend.
Report and fix suggestion from Tom.
An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
Code that check the flag no longer need #ifdef's, which is more convenient.
In particular, makes it easier to write extensions that depend on it.
In the passing, modify sslinfo's ssl_is_used function to check ssl_in_use
instead of the OpenSSL specific 'ssl' pointer. It doesn't make any
difference currently, as sslinfo is only compiled when built with OpenSSL,
but seems cleaner anyway.
This gives an overview of what Lehman & Yao's paper is all about, so that
you can understand the rest of the README without having to read the paper.
Per discussion with Peter Geoghegan and others.
Add a new XLOG_FPI_FOR_HINT record type, and use that for full-page images
generated for hint bit updates, when checksums are enabled. The new record
type is replayed exactly the same as XLOG_FPI, but allows them to be tallied
separately e.g. in pg_xlogdump.
There may once have been a reason for the intermediate proc_stmts
production in the plpgsql grammar, but it isn't doing anything useful
anymore, so let's collapse it into proc_sect. Saves some code and
probably a small number of nanoseconds per statement list.
In passing, correctly alphabetize keyword lists to match pl_scanner.c;
note that for "rowtype" vs "row_count", pl_scanner.c must sort on the
basis of the lower-case spelling.
Noted while fooling with a patch to de-reserve more plpgsql keywords.
The locution "EXISTS(SELECT ... LIMIT 1)" seems to be rather common among
people who don't realize that the database already performs optimizations
equivalent to putting LIMIT 1 in the sub-select. Unfortunately, this was
actually making things worse, because it prevented us from optimizing such
EXISTS clauses into semi or anti joins. Teach simplify_EXISTS_query() to
suppress constant-positive LIMIT clauses. That fixes the semi/anti-join
case, and may help marginally even for cases that have to be left as
sub-SELECTs.
Marti Raudsepp, reviewed by David Rowley
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
PSQLexec's error reporting turns out to be too verbose for this case, so
revert to using PQexec instead with minimal error reporting. Prior to
calling PQexec, we call a function that mimics just the echo_hidden
piece of PSQLexec.
Make it work more like FDW plans do: instead of assuming that there are
expressions in a CustomScan plan node that the core code doesn't know
about, insist that all subexpressions that need planner attention be in
a "custom_exprs" list in the Plan representation. (Of course, the
custom plugin can break the list apart again at executor initialization.)
This lets us revert the parts of the patch that exposed setrefs.c and
subselect.c processing to the outside world.
Also revert the GetSpecialCustomVar stuff in ruleutils.c; that concept
may work in future, but it's far from fully baked right now.
Instead of register_custom_path_provider and a CreateCustomScanPath
callback, let's just provide a standard function hook in set_rel_pathlist.
This is more flexible than what was previously committed, is more like the
usual conventions for planner hooks, and requires less support code in the
core. We had discussed this design (including centralizing the
set_cheapest() calls) back in March or so, so I'm not sure why it wasn't
done like this already.
This error counted the first line of a cell as "extra". The effect was
to cause far too frequent invocation of the pager. In most cases this
can be worked around (for example, by using the "less" pager with the -F
flag), so don't backpatch.
These commands were calling the database direct rather than calling
PSQLexec like other slash commands that needed database data.
The code is also changed not to pass the connection as a parameter to
the helper functions. It's available in a global variable, and that's
what PSQLexec uses.
There seems no prospect that any of this will ever be useful, and indeed
it's questionable whether some of it would work if it ever got called;
it's certainly not been exercised in a very long time, if ever. So let's
get rid of it, and make the comments about mark/restore in execAmi.c less
wishy-washy.
The mark/restore support for Result nodes is also currently dead code,
but that's due to planner limitations not because it's impossible that
it could be useful. So I left it in.
Get rid of the pernicious entanglement between planner and executor headers
introduced by commit 0b03e5951b.
Also, rearrange the CustomFoo struct/typedef definitions so that all the
typedef names are seen as used by the compiler. Without this pgindent
will mess things up a bit, which is not so important perhaps, but it also
removes a bizarre discrepancy between the declaration arrangement used for
CustomExecMethods and that used for CustomScanMethods and
CustomPathMethods.
Clean up the commentary around ExecSupportsMarkRestore to reflect the
rather large change in its API.
Const-ify register_custom_path_provider's argument. This necessitates
casting away const in the function, but that seems better than forcing
callers of the function to do so (or else not const-ify their method
pointer structs, which was sort of the whole point).
De-export fix_expr_common. I don't like the exporting of fix_scan_expr
or replace_nestloop_params either, but this one surely has got little
excuse.
execCurrent.c's search_plan_tree() must recognize a CustomScan on the
target relation. This would only be helpful for custom providers that
support CurrentOfExpr quals, which is probably a bit far-fetched, but
it's not impossible I think. But even without assuming that, we need
to recognize a scanned-relation match so that we will properly throw
error if the desired relation is being scanned with both a CustomScan
and a regular scan (ie, self-join).
Also recognize ForeignScanState for similar reasons. Supporting WHERE
CURRENT OF on a foreign table is probably even more far-fetched than
it is for custom scans, but I think in principle you could do it with
postgres_fdw (or another FDW that supports the ctid column). This
would be a back-patchable bug fix if existing FDWs handled CurrentOfExpr,
but I doubt any do so I won't bother back-patching.
Now that we have a policy of hiding varlena catalog fields behind
"#ifdef CATALOG_VARLEN", there is no need for their type names to be
acceptable to the C compiler. And experimentation shows that it does
not matter to pgindent either. (If it did, we'd have problems anyway,
since these typedefs are unreferenced so far as the C compiler is
concerned, and find_typedef fails to identify such typedefs.)
Hence, remove the phony typedefs that genbki.h provided to make
some varlena field definitions compilable.
In passing, rearrange #define's into what seemed a more logical order.
It's a false positive - the variable is only used when 'onleft' is true,
and it is initialized in that case. But the compiler doesn't necessarily
see that.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
Custom rules must come after pgxs inclusion, not before, because any
rule added before pgxs will break the default 'all' target.
Author: Cédric Villemain <cedric@2ndquadrant.fr>
That includes VACUUM on GIN, GiST and SP-GiST indexes, and B-tree indexes
large enough to cause page deletions in B-tree. Plus some other special
cases.
After this patch, the regression tests generate all different WAL record
types. Not all branches within the redo functions are covered, but it's a
step forward.
In pg_receivexlog, in order to check whether the current WAL file is
being opened or not, its file descriptor has to be checked against -1
as an invalid value. But, oops, 7900e94 added the incorrect test
checking the descriptor against 1. This commit fixes that bug.
Back-patch to 9.4 where the bug was added.
Spotted by Magnus Hagander
When pg_receivexlog --slot is connecting to the server, at the shutdown
of the server, walsender keeps waiting for the last WAL record to be
replicated and flushed in pg_receivexlog. But previously pg_receivexlog
issued sync command only when WAL file was switched. So there was
the case where the last WAL was never flushed and walsender had to
keep waiting infinitely. This caused the server shutdown to get stuck.
pg_recvlogical handles this problem by calling fsync() when it receives
the request of immediate reply from the server. That is, at shutdown,
walsender sends the request, pg_recvlogical receives it, flushes the last
WAL record, and sends the flush location back to the server. Since
walsender can see that the last WAL record is successfully flushed, it can
exit cleanly.
This commit introduces the same logic as pg_recvlogical has,
to pg_receivexlog.
Back-patch to 9.4 where pg_receivexlog was changed so that it can use
the replication slot.
Original patch by Michael Paquier, rewritten by me.
Bug report by Furuya Osamu.
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
These comments don't seem to have been touched in a long time. Make them
describe the current implementation rather than what was here last century,
and be a bit more explicit about the unreferenced-typedefs issue.
pg_dump/parallel.c was using realloc() directly with no error check.
While the odds of an actual failure here seem pretty low, Coverity
complains about it, so fix by using pg_realloc() instead.
While looking for other instances, I noticed a couple of places in
psql that hadn't gotten the memo about the availability of pg_realloc.
These aren't bugs, since they did have error checks, but verbosely
inconsistent code is not a good thing.
Back-patch as far as 9.3. 9.2 did not have pg_dump/parallel.c, nor
did it have pg_realloc available in all frontend code.
For <, <=, > and >= strategies, mark the first scan key
as already matched if scanning in an appropriate direction.
If index tuple contains no nulls we can skip the first
re-check for each tuple.
Author: Rajeev Rastogi
Reviewer: Haribabu Kommi
Rework of the code and comments by Simon Riggs
Allows pg_dump to use a snapshot previously defined by a concurrent
session that has either used pg_export_snapshot() or obtained a
snapshot when creating a logical slot. When this option is used with
parallel pg_dump, the snapshot defined by this option is used and no
new snapshot is taken.
Simon Riggs and Michael Paquier
Previously pg_receivexlog flushed WAL data only when WAL file was switched.
Then 3dad73e added -F option to pg_receivexlog so that users could control
how frequently sync commands were issued to WAL files. It also allowed users
to make pg_receivexlog flush WAL data immediately after writing by
specifying 0 in -F option. However feedback messages were not sent back
immediately even after a flush location was updated. So even if WAL data
was flushed in real time, the server could not see that for a while.
This commit removes -F option from and adds --synchronous to pg_receivexlog.
If --synchronous is specified, like the standby's wal receiver, pg_receivexlog
flushes WAL data as soon as there is WAL data which has not been flushed yet.
Then it sends back the feedback message identifying the latest flush location
to the server. This option is useful to make pg_receivexlog behave as sync
standby by using replication slot, for example.
Original patch by Furuya Osamu, heavily rewritten by me.
Reviewed by Heikki Linnakangas, Alvaro Herrera and Sawada Masahiko.
DST law changes in the Turks & Caicos Islands (America/Grand_Turk) and
in Fiji. New zone Pacific/Bougainville for portions of Papua New Guinea.
Historical changes for Korea and Vietnam.
There was some confusion on how to record the case that the operation
unlinks the last non-leaf page in the branch being deleted.
_bt_unlink_halfdead_page set the "topdead" field in the WAL record to
the leaf page, but the redo routine assumed that it would be an invalid
block number in that case. This commit fixes _bt_unlink_halfdead_page to
do what the redo routine expected.
This code is new in 9.4, so backpatch there.
Buildfarm members with CLOBBER_CACHE_ALWAYS advised us that commit
85b506bbfc was mistaken in setting the relpersistence value of the
index directly in the relcache entry, within reindex_index. The reason
for the failure is that an invalidation message that comes after mucking
with the relcache entry directly, but before writing it to the catalogs,
would cause the entry to become rebuilt in place from catalogs with the
old contents, losing the update.
Fix by passing the correct persistence value to
RelationSetNewRelfilenode instead; this routine also writes the updated
tuple to pg_class, avoiding the problem. Suggested by Tom Lane.
When checking a table that has an inheritance tree marked,
if no child tables remain, we skip ANALYZE. This patch emits
a message to show that the action has been skipped.
Author: Etsuro Fujita
Reviewer: Furuya Osamu
This removes ATChangeIndexesPersistence() introduced by f41872d0c1
which was too ugly to live for long. Instead, the correct persistence
marking is passed all the way down to reindex_index, so that the
transient relation built to contain the index relfilenode can
get marked correctly right from the start.
Author: Fabrízio de Royes Mello
Review and editorialization by Michael Paquier
and Álvaro Herrera
630cd14426 added initdb --sync-only, for use by pg_upgrade, by just
exposing the existing fsync code. That's wrong, because initdb so far
had absolutely no reason to deal with tablespaces.
Fix --sync-only by additionally explicitly syncing each of the
tablespaces.
Backpatch to 9.3 where --sync-only was introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are only reset when performing a unclean
restart. That means they have to be synced to disk during clean
shutdowns. During normal processing that's achieved by registering a
buffer's file to be fsynced at the next checkpoint when flushed. But
ResetUnloggedRelations() doesn't go through the buffer manager, so
nothing will force reset relations to disk before the next shutdown
checkpoint.
So just make ResetUnloggedRelations() fsync the newly created main
forks to disk.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
The initial patch for RLS mistakenly included headers associated with
the executor and planner bits in rewrite/rowsecurity.h. Per policy and
general good sense, executor headers should not be included in planner
headers or vice versa.
The include of execnodes.h was a mistaken holdover from previous
versions, while the include of relation.h was used for Relation's
definition, which should have been coming from utils/relcache.h. This
patch cleans these issues up, adds comments to the RowSecurityPolicy
struct and the RowSecurityConfigType enum, and changes Relation->rsdesc
to Relation->rd_rsdesc to follow Relation field naming convention.
Additionally, utils/rel.h was including rewrite/rowsecurity.h, which
wasn't a great idea since that was pulling in things not really needed
in utils/rel.h (which gets included in quite a few places). Instead,
use 'struct RowSecurityDesc' for the rd_rsdesc field and add comments
explaining why.
Lastly, add an include into access/nbtree/nbtsort.c for
utils/sortsupport.h, which was evidently missed due to the above mess.
Pointed out by Tom in 16970.1415838651@sss.pgh.pa.us; note that the
concerns regarding a similar situation in the custom-path commit still
need to be addressed.
Per complaint from Tom.
While at it, throw in some extra tests for nulls as well, and make sure
that the set of data we insert on the second round is not identical to
the first one. Both measures are intended to improve coverage of the
test.
Also uncomment the ON COMMIT DROP clause on the CREATE TEMP TABLE
commands. This doesn't have any effect for someone examining the
regression database after the tests are done, but it reduces clutter for
those that execute the script directly.
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
In some workloads BufferGetBlockNumber() shows up in profiles due to
the sheer number of calls to it (and because it causes cache
misses). The compiler can't move it out of the loop because it's a
full extern function call...
pg_atomic_init_u64 (indirectly) uses compare/exchange to guarantee
atomic writes on platforms where compare/exchange is available, but
64bit writes aren't atomic (yes, those exist). That leads to a
harmless read of the initial value of variable.
Fix breakage induced by commits d8d3d2a4f3
and 463f2625a5fb183b6a8925ccde98bb3889f921d9: pg_dumpall has crashed when
attempting to dump from pre-8.1 servers since then, due to faulty
construction of the query used for dumping roles from older servers.
The query was erroneous as of the earlier commit, but it wasn't exposed
unless you tried to use --binary-upgrade, which you presumably wouldn't
with a pre-8.1 server. However commit 463f2625a made it fail always.
In HEAD, also fix additional breakage induced in the same query by
commit 491c029dbc, which evidently wasn't
tested against pre-8.1 servers either.
The bug is only latent in 9.1 because 463f2625a hadn't landed yet, but
it seems best to back-patch all branches containing the faulty query.
Gilles Darold
There are basically three situations in which logical decoding needs
to perform cache invalidation. During/After replaying a transaction
with catalog changes, when skipping a uninteresting transaction that
performed catalog changes and when erroring out while replaying a
transaction. Unfortunately these three cases were all done slightly
differently - partially because 8de3e410fa, which greatly simplifies
matters, got committed in the midst of the development of logical
decoding.
The actually problematic case was when logical decoding skipped
transaction commits (and thus processed invalidations). When used via
the SQL interface cache invalidation could access the catalog - bad,
because we didn't set up enough state to allow that correctly. It'd
not be hard to setup sufficient state, but the simpler solution is to
always perform cache invalidation outside a valid transaction.
Also make the different cache invalidation cases look as similar as
possible, to ease code review.
This fixes the assertion failure reported by Antonin Houska in
53EE02D9.7040702@gmail.com. The presented testcase has been expanded
into a regression test.
Backpatch to 9.4, where logical decoding was introduced.
When building the initial historic catalog snapshot there were
scenarios where snapbuild.c would use incorrect xmin/xmax values when
starting from a xl_running_xacts record. The values used were always a
bit suspect, but happened to be correct in the easy to test
cases. Notably the values used when the the initial snapshot was
computed while no other transactions were running were correct.
This is likely to be the cause of the occasional buildfarm failures on
animals markhor and tick; but it's quite possible to reproduce
problems without CLOBBER_CACHE_ALWAYS.
Backpatch to 9.4, where logical decoding was introduced.
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
The hope is that we can use this to produce better diagnostics in
some cases.
Peter Geoghegan, reviewed by Michael Paquier, with some further
changes by me.
This only happens if a client issues a Parse message with an empty query
string, which is a bit odd; but since it is explicitly called out as legal
by our FE/BE protocol spec, we'd probably better continue to allow it.
Fix by adding tests everywhere that the raw_parse_tree field is passed to
functions that don't or shouldn't accept NULL. Also make it clear in the
relevant comments that NULL is an expected case.
This reverts commits a73c9dbab0 and
2e9650cbcf, which fixed specific crash
symptoms by hacking things at what now seems to be the wrong end, ie the
callee functions. Making the callees allow NULL is superficially more
robust, but it's not always true that there is a defensible thing for the
callee to do in such cases. The caller has more context and is better
able to decide what the empty-query case ought to do.
Per followup discussion of bug #11335. Back-patch to 9.2. The code
before that is sufficiently different that it would require development
of a separate patch, which doesn't seem worthwhile for what is believed
to be an essentially cosmetic change.
Heikki noticed in 544E23C0.8090605@vmware.com that slot.c and
snapbuild.c were missing the FIN_CRC32 call when computing/checking
checksums of on disk files. That doesn't lower the the error detection
capabilities of the checksum, but is inconsistent with other usages.
In a followup mail Heikki also noticed that, contrary to a comment,
the 'version' and 'length' struct fields of replication slot's on disk
data where not covered by the checksum. That's not likely to lead to
actually missed corruption as those fields are cross checked with the
expected version and the actual file length. But it's wrong
nonetheless.
As fixing these issues makes existing on disk files unreadable, bump
the expected versions of on disk files for both slots and logical
decoding historic catalog snapshots. This means that loading old
files will fail with
ERROR: "replication slot file ... has unsupported version 1"
and
ERROR: "snapbuild state file ... has unsupported version 1 instead of
2" respectively. Given the low likelihood of anybody already using
these new features in a production setup that seems acceptable.
Fixing these issues made me notice that there's no regression test
covering the loading of historic snapshot from disk - so add one.
Backpatch to 9.4 where these features were introduced.
On Windows, DROP TABLESPACE has a race condition when run concurrently
with other processes having opened files in the tablespace. This led to
a rare failure on buildfarm member frogmouth. Back-patch to 9.4, where
the reconnection was introduced.
When the recursive search in dependency.c visits a column and then later
visits the whole table containing the column, it needs to propagate the
drop-context flags for the table to the existing target-object entry for
the column. Otherwise we might refuse the DROP (if not CASCADE) on the
incorrect grounds that there was no automatic drop pathway to the column.
Remarkably, this has not been reported before, though it's possible at
least when an extension creates both a datatype and a table using that
datatype.
Rather than just marking the column as allowed to be dropped, it might
seem good to skip the DROP COLUMN step altogether, since the later DROP
of the table will surely get the job done. The problem with that is that
the datatype would then be dropped before the table (since the whole
situation occurred because we visited the datatype, and then recursed to
the dependent column, before visiting the table). That seems pretty risky,
and the case is rare enough that it doesn't seem worth expending a lot of
effort or risk to make the drops happen in a safe order. So we just play
dumb and delete the column separately according to the existing drop
ordering rules.
Per report from Petr Jelinek, though this is different from his proposed
patch.
Back-patch to 9.1, where extensions were introduced. There's currently
no evidence that such cases can arise before 9.1, and in any case we would
also need to back-patch cb5c2ba2d8 to 9.0
if we wanted to back-patch this.
Previously the maximum size of GIN pending list was controlled only by
work_mem. But the reasonable value of work_mem and the reasonable size
of the list are basically not the same, so it was not appropriate to
control both of them by only one GUC, i.e., work_mem. This commit
separates new GUC, pending_list_cleanup_size, from work_mem to allow
users to control only the size of the list.
Also this commit adds pending_list_cleanup_size as new storage parameter
to allow users to specify the size of the list per index. This is useful,
for example, when users want to increase the size of the list only for
the GIN index which can be updated heavily, and decrease it otherwise.
Reviewed by Etsuro Fujita.
I missed an additional colon in previous patch. Oops. to make that mistake
less likely in the future, add comments as placeholders for unused inputs
and outputs in inline assembly.
The code that generates the BRIN_XLOG_UPDATE removes the buffer
reference when the page that's target for the updated tuple is freshly
initialized. This is a pretty usual optimization, but was breaking the
case where the revmap buffer, which is referenced in the same WAL
record, is getting a backup block: the replay code was using backup
block index 1, which is not valid when the update target buffer gets
pruned; the revmap buffer gets assigned 0 instead. Make sure to use the
correct backup block index for revmap when replaying.
Bug reported by Fujii Masao.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
That did not work terribly well before this patch: you could get the column
names of the underlying table, or column aliases from any level of the
query, depending on minor details of the plan tree. You could even get
totally empty field names, which is disastrous for cases like row_to_json().
To fix this for whole-row Vars, look to the RTE referenced by the Var, and
make sure its column aliases are applied to the rowtype associated with
the result Datums. This is a tad scary because we might have to return
a transient RECORD type even though the Var is declared as having some
named rowtype. In principle it should be all right because the record
type will still be physically compatible with the named rowtype; but
I had to weaken one Assert in ExecEvalConvertRowtype, and there might be
third-party code containing similar assumptions.
Similarly, RowExprs have to be willing to override the column names coming
from a named composite result type and produce a RECORD when the column
aliases visible at the site of the RowExpr differ from the underlying
table's column names.
In passing, revert the decision made in commit 398f70ec07 to add
an alias-list argument to ExecTypeFromExprList: better to provide that
functionality in a separate function. This also reverts most of the code
changes in d685814835, which we don't need because we're no longer
depending on the tupdesc found in the child plan node's result slot to be
blessed.
Back-patch to 9.4, but not earlier, since this solution changes the results
in some cases that users might not have realized were buggy. We'll apply a
more restricted form of this patch in older branches.
Besides a couple of typo fixes, per David Rowley, Thom Brown, and Amit
Langote, and mentions of BRIN in the general CREATE INDEX page again per
David, this includes silencing MSVC compiler warnings (thanks Microsoft)
and an additional variable initialization per Coverity scanner.
Reported by David Rowley: variadic macros are a problem. Get rid of
them using a trick suggested by Tom Lane: add extra parentheses where
needed. In the future we might decide we don't need the calls at all
and remove them, but it seems appropriate to keep them while this code
is still new.
Also from David Rowley: brininsert() was trying to use a variable before
initializing it. Fix by moving the brin_form_tuple call (which
initializes the variable) to within the locked section.
Reported by Peter Eisentraut: can't use "new" as a struct member name,
because C++ compilers will choke on it, as reported by cpluspluscheck.
Work around accidental test failures because the working directory path
is too long by creating a temporary directory in the (hopefully shorter)
system location, symlinking that to the working directory, and creating
the tablespaces using the shorter path.
This allows extension modules to define their own methods for
scanning a relation, and get the core code to use them. It's
unclear as yet how much use this capability will find, but we
won't find out if we never commit it.
KaiGai Kohei, reviewed at various times and in various levels
of detail by Shigeru Hanada, Tom Lane, Andres Freund, Álvaro
Herrera, and myself.
Now that the backup blocks are appended to the WAL record in xloginsert.c,
XLogInsert doesn't see them anymore and cannot remove them from the version
reconstructed for xlog_outdesc. This makes running with wal_debug=on more
expensive, as we now make (unnecessary) temporary copies of the backup
blocks, but it doesn't seem worth convoluting the code to keep that
optimization.
Reported by Alvaro Herrera.
Test misc depends on brin, but it was earlier in the serial schedule
file. I didn't notice this because I only run the parallel schedule,
but the buildfarm exposed my folly ...
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
The code that generated a record to clear the F_TUPLES_DELETED flag hasn't
existed since we got rid of old-style VACUUM FULL. I kept the code that sets
the flag, although it's not used for anything anymore, because it might
still be interesting information for debugging purposes that some tuples
have been deleted from a page.
Likewise, the code to turn the root page from non-leaf to leaf page was
removed when we got rid of old-style VACUUM FULL. Remove the code to replay
that action, too.
dict_thesaurus stored phrase IDs in uint16 fields, so it would get confused
and even crash if there were more than 64K entries in the configuration
file. It turns out to be basically free to widen the phrase IDs to uint32,
so let's just do so.
This was complained of some time ago by David Boutin (in bug #7793);
he later submitted an informal patch but it was never acted on.
We now have another complaint (bug #11901 from Luc Ouellette) so it's
time to make something happen.
This is basically Boutin's patch, but for future-proofing I also added a
defense against too many words per phrase. Note that we don't need any
explicit defense against overflow of the uint32 counters, since before that
happens we'd hit array allocation sizes that repalloc rejects.
Back-patch to all supported branches because of the crash risk.
The default JSONB GIN opclass (jsonb_ops) converts numeric data values
to strings for storage in the index. It must ensure that numeric values
that would compare equal (such as 12 and 12.00) produce identical strings,
else index searches would have behavior different from regular JSONB
comparisons. Unfortunately the function charged with doing this was
completely wrong: it could reduce distinct numeric values to the same
string, or reduce equivalent numeric values to different strings. The
former type of error would only lead to search inefficiency, but the
latter type of error would cause index entries that should be found by
a search to not be found.
Repairing this bug therefore means that it will be necessary for 9.4 beta
testers to reindex GIN jsonb_ops indexes, if they care about getting
correct results from index searches involving numeric data values within
the comparison JSONB object.
Per report from Thomas Fanghaenel.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Long ago we briefly had an "autocommit" GUC that turned server-side
autocommit on and off. That behavior was removed in 7.4 after concluding
that it broke far too much client-side logic, and making clients cope with
both behaviors was impractical. But the GUC variable was left behind, so
as not to break any client code that might be trying to read its value.
Enough time has now passed that we should remove the GUC completely.
Whatever vestigial backwards-compatibility benefit it had is outweighed by
the risk of confusion for newbies who assume it ought to do something,
as per a recent complaint from Wolfgang Wilhelm.
In passing, adjust what seemed to me a rather confusing documentation
reference to libpq's autocommit behavior. libpq as such knows nothing
about autocommit, so psql is probably what was meant.
Obviously, every translation unit should not be declaring this
separately. It needs to be PGDLLIMPORT as well, to avoid breaking
third-party code that uses any of the functions that the commit
mentioned above changed to macros.
This is a followup to commit 43ac12c6e6,
which added regression tests checking that I/O functions of built-in
types are not marked volatile. Complaining in CREATE TYPE should push
developers of add-on types to fix any misdeclared functions in their
types. It's just a warning not an error, to avoid creating upgrade
problems for what might be just cosmetic mis-markings.
Aside from adding the warning code, fix a number of types that were
sloppily created in the regression tests.
The previous coding assumed that we could just let buffers for the
database's old tablespace age out of the buffer arena naturally.
The folly of that is exposed by bug #11867 from Marc Munro: the user could
later move the database back to its original tablespace, after which any
still-surviving buffers would match lookups again and appear to contain
valid data. But they'd be missing any changes applied while the database
was in the new tablespace.
This has been broken since ALTER SET TABLESPACE was introduced, so
back-patch to all supported branches.
The old algorithm was found to not be the usual CRC-32 algorithm, used by
Ethernet et al. We were using a non-reflected lookup table with code meant
for a reflected lookup table. That's a strange combination that AFAICS does
not correspond to any bit-wise CRC calculation, which makes it difficult to
reason about its properties. Although it has worked well in practice, seems
safer to use a well-known algorithm.
Since we're changing the algorithm anyway, we might as well choose a
different polynomial. The Castagnoli polynomial has better error-correcting
properties than the traditional CRC-32 polynomial, even if we had
implemented it correctly. Another reason for picking that is that some new
CPUs have hardware support for calculating CRC-32C, but not CRC-32, let
alone our strange variant of it. This patch doesn't add any support for such
hardware, but a future patch could now do that.
The old algorithm is kept around for tsquery and pg_trgm, which use the
values in indexes that need to remain compatible so that pg_upgrade works.
While we're at it, share the old lookup table for CRC-32 calculation
between hstore, ltree and core. They all use the same table, so might as
well.
The reasons behind commit 0d147e43ad still
stand, so this reverts the non-cosmetic portion of commit
a7983e989d. Back-patch to 9.4, where the
latter commit first appeared.
Cygwin builds require this of dependencies pertaining to pattern rules.
On Cygwin, stat("foo") in the absence of a file with that exact name can
locate foo.exe. While GNU make uses stat() for dependencies of ordinary
rules, it uses readdir() to assess dependencies of pattern rules.
Therefore, a pattern rule dependency should match any underlying file
name exactly. Back-patch to 9.4, where the dependency was introduced.
A background worker can use pq_redirect_to_shm_mq() to direct protocol
that would normally be sent to the frontend to a shm_mq so that another
process may read them.
The receiving process may use pq_parse_errornotice() to parse an
ErrorResponse or NoticeResponse from the background worker and, if
it wishes, ThrowErrorData() to propagate the error (with or without
further modification).
Patch by me. Review by Andres Freund.
This reassociates a dynamic shared memory handle previous passed to
dsm_pin_mapping with the current resource owner, so that it will be
cleaned up at the end of the current query.
Patch by me. Review of the function name by Andres Freund, Amit
Kapila, Jim Nasby, Petr Jelinek, and Álvaro Herrera.
As noted by Noah Misch, my initial cut at fixing bug #11638 didn't cover
all cases where ANALYZE might be invoked in an unsafe context. We need to
test the result of IsInTransactionChain not IsTransactionBlock; which is
notationally a pain because IsInTransactionChain requires an isTopLevel
flag, which would have to be passed down through several levels of callers.
I chose to pass in_outer_xact (ie, the result of IsInTransactionChain)
rather than isTopLevel per se, as that seemed marginally more apropos
for the intermediate functions to know about.
Nobody seemed concerned about this naming when it originally went in,
but there's a pending patch that implements the opposite of
dsm_keep_mapping, and the term "unkeep" was judged unpalatable.
"unpin" has existing precedent in the PostgreSQL code base, and the
English language, so use this terminology instead.
Per discussion, back-patch to 9.4.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
Instead of initializing a new TransInvalidationInfo for every
transaction or subtransaction, we can just do it for those
transactions or subtransactions that actually need to queue
invalidation messages. That also avoids needing to free those
entries at the end of a transaction or subtransaction that does
not generate any invalidation messages, which is by far the
common case.
Patch by me. Review by Simon Riggs and Andres Freund.
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
Since we got rid of non-MVCC catalog scans, the fourth reason given for
using a non-transactional update in index_update_stats() is obsolete.
The other three are still good, so we're not going to change the code,
but fix the comment.
Newer toolchains append the extension implicitly if missing, but
buildfarm member narwhal (gcc 3.4.2, ld 2.15.91 20040904) does not.
This affects most core libraries having an exports.txt file, namely
libpq and the ECPG support libraries. On Windows Server 2003, Windows
API functions that load and unload DLLs internally will mistakenly
unload a libpq whose DLL header reports "LIBPQ" instead of "LIBPQ.dll".
When, subsequently, control would return to libpq, the backend crashes.
Back-patch to 9.4, like commit 846e91e022.
Before that commit, we used a different linking technique that yielded
"libpq.dll" in the DLL header.
Commit 53566fc094 worked around this by
eliminating a call to a function that loads and unloads DLLs internally.
That commit is no longer necessary for correctness, but its improving
consistency with the MSVC build remains valid.
1. The comparison for matching terms used only the CRC to decide if there's
a match. Two different terms with the same CRC gave a match.
2. It assumed that if the second operand has more terms than the first, it's
never a match. That assumption is bogus, because there can be duplicate
terms in either operand.
Rewrite the implementation in a way that doesn't have those bugs.
Backpatch to all supported versions.
Commit ad5d46a449 thought that we could
get around the known portability issues of strftime's %Z specifier by
using %z instead. However, that idea seems to have been innocent of
any actual research, as it certainly missed the facts that
(1) %z is not portable to pre-C99 systems, and
(2) %z doesn't actually act differently from %Z on Windows anyway.
Per failures on buildfarm member hamerkop.
While at it, centralize the code defining what strftime format we
want to use in pg_dump; three copies of that string seems a bit much.
The malloc request was 1 byte too small for the worst-case output.
This seems relatively unlikely to cause any problems in practice,
as the worst case only occurs if the input string contains no
characters other than single-quote or newline, and even then
malloc alignment padding would probably save the day. But it's
definitely a bug.
David Rowley
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f757), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
Perl 5.12 ships with a somewhat broken version of Test::Simple, so skip
the tests if that is found.
The relevant fix is
0.98 Wed, 23 Feb 2011 14:38:02 +1100
Bug Fixes
* subtest() should not fail if $? is non-zero. (Aaron Crane)
The prove program included in Perl 5.8 does not support the --ext
option, so don't use that and use wildcards on the command line instead.
Note that the tests will still all be skipped, because, for instance,
the version of Test::More is too old, but at least the regular
mechanisms for handling that will apply, instead of failing to call
prove altogether.
Windows has one a locale whose name contains a non-ASCII character:
"Norwegian (Bokmål)" (that's an 'a' with a ring on top). That causes
trouble; when passing it setlocale(), it's not clear what encoding the
argument should be in. Another problem is that the locale name is stored in
pg_database catalog table, and the encoding used there depends on what
server encoding happens to be in use when the database is created. For
example, if you issue the CREATE DATABASE when connected to a UTF-8
database, the locale name is stored in pg_database in UTF-8. As long as all
locale names are pure ASCII, that's not a problem.
To work around that, map the troublesome locale name to a pure-ASCII alias
of the same locale, "norwegian-bokmal".
Now, this doesn't change the existing values that are already in
pg_database and in postgresql.conf. Old clusters will need to be fixed
manually. Instructions for that need to be put in the release notes.
This fixes bug #11431 reported by Alon Siman-Tov. Backpatch to 9.2;
backpatching further would require more work than seems worth it.
Apparently, this is a very common mistake for users to make; it is
better to have it fail reasonably rather than throw potentially a large
number of errors. Since we have a magic string at the start of the
file, we can detect the case easily and there's no other possible useful
behavior anyway.
Author: Craig Ringer
We have a project policy that I/O functions must not be volatile, as per
commit aab353a60b, but we weren't doing
anything to enforce that. In most usage the marking of the function
doesn't matter as long as its behavior is sane --- but I/O casts can
expose the marking as user-visible behavior, as per today's complaint
from Joe Van Dyk about contrib/ltree.
This test as such will only protect us against future errors in built-in
data types. To catch the same error in contrib or third-party types,
perhaps we should make CREATE TYPE complain? But that's a separate
issue from enforcing the policy for built-in types.
Don't crash if an ispell dictionary definition contains flags but not
any compound affixes. (This isn't a security issue since only superusers
can install affix files, but still it's a bad thing.)
Also, be more careful about detecting whether an affix-file FLAG command
is old-format (ispell) or new-format (myspell/hunspell). And change the
error message about mixed old-format and new-format commands into something
intelligible.
Per bug #11770 from Emre Hasegeli. Back-patch to all supported branches.
Testing reveals that the memory allocation we do at transaction start
has small but measurable overhead on simple transactions. To cut
down on that overhead, defer some of that work to the point when
AFTER triggers are first used, thus avoiding it altogether if they
never are.
Patch by me. Review by Andres Freund.
This commit simply removes the second argument of PSQLexec that was
set to the same value everywhere. Comments and code blocks related
to this parameter are removed.
Noticed by Heikki Linnakangas, reviewed by Michael Paquier
Previously, this was not exposed outside of miscinit.c. It is needed
for the pending pg_background patch, and will also be needed for
parallelism. Without it, there's no way for a background worker to
re-create the exact authentication environment that was present in the
process that started it, which could lead to security exposures.
Previously the archive recovery always created .ready file for
the last WAL file of the old timeline at the end of recovery even when
it's restored from the archive and has .done file. That is, there was
the case where the WAL file had both .ready and .done files.
This caused the already-archived WAL file to be archived again.
This commit prevents the archive recovery from creating .ready file
for the last WAL file if it has .done file, in order to prevent it from
being archived again.
This bug was added when cascading replication feature was introduced,
i.e., the commit 5286105800.
So, back-patch to 9.2, where cascading replication was added.
Reviewed by Michael Paquier
In a couple of code paths, pg_class_aclcheck is called in succession
with multiple different modes set. This patch combines those modes to
have a single call of this function and reduce a bit process overhead
for permission checking.
Author: Michael Paquier <michael@otacoo.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
When commit 846e91e022 switched the linker
driver from dlltool/dllwrap to gcc, it became possible for linking to
choose shared libgcc. Backends having loaded a module dynamically
linked to libgcc can exit abnormally, which the postmaster treats like a
crash. Resume use of static libgcc exclusively, like 9.3 and earlier.
Back-patch to 9.4.
This improves consistency with the MSVC build. On buildfarm member
narwhal, since commit 846e91e022,
shfolder.dll:SHGetFolderPath() crashes when dblink calls it by way of
pqGetHomeDirectory(). Back-patch to 9.4, where that commit first
appeared. How it caused this regression remains a mystery. This is a
partial revert of commit 889f038129, which
adopted shfolder.dll for Windows NT 4.0 compatibility. PostgreSQL 8.2
dropped support for that operating system.
Building the documentation with XSLT does not check the DTD, like a
DSSSL build would. One can often get away with having invalid XML, but
the stylesheets might then create incorrect output, as they are not
designed to handle that. Therefore, check the validity of the XML
against the DTD, using xmllint, during the build.
Add xmllint detection to configure, and add some documentation.
xmllint comes with libxml2, which is already in use, but it might be in
a separate package, such as libxml2-utils on Debian.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
The duplication originated in cdd46c765, where restartpoints were
introduced.
In LogCheckpointStart's case the duplication actually lead to the
compiler's format string checking not to be effective because the
format string wasn't constant.
Arguably these messages shouldn't be elog(), but ereport() style
messages. That'd even allow to translate the messages... But as
there's more mistakes of that kind in surrounding code, it seems
better to change that separately.
Commit 7dbb606938 added a new CHECKPOINT_FLUSH_ALL flag. As that
commit needed to be backpatched I didn't change the numeric values of
the existing flags as that could lead to nastly problems if any
external code issued checkpoints. That's not a concern on master, so
renumber them there.
Also add a comment about CHECKPOINT_FLUSH_ALL above
CreateCheckPoint().
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
json_agg and json_object_agg and their associated transition functions
should have been marked as stable rather than immutable, as they call IO
functions indirectly. Changing this probably isn't going to make much
difference, as you can't use an aggregate function in an index
expression, but we should be correct nevertheless.
json_object, on the other hand, should be marked immutable rather than
stable, as it does not call IO functions.
As discussed on -hackers, this change is being made without bumping the
catalog version, as we don't want to do that at this stage of the cycle,
and the changes are very unlikely to affect anyone.
If an inline-able SQL function taking a composite argument is used in a
LATERAL subselect, and the composite argument is a lateral reference,
the planner could fail with "variable not found in subplan target list",
as seen in bug #11703 from Karl Bartel. (The outer function call used in
the bug report and in the committed regression test is not really necessary
to provoke the bug --- you can get it if you manually expand the outer
function into "LATERAL (SELECT inner_function(outer_relation))", too.)
The cause of this is that we generate the reltargetlist for the referenced
relation before doing eval_const_expressions() on the lateral sub-select's
expressions (cf find_lateral_references()), so what's scheduled to be
emitted by the referenced relation is a whole-row Var, not the simplified
single-column Var produced by optimizing the function's FieldSelect on the
whole-row Var. Then setrefs.c fails to match up that lateral reference to
what's available from the outer scan.
Preserving the FieldSelect optimization in such cases would require either
major planner restructuring (to recursively do expression simplification
on sub-selects much earlier) or some amazingly ugly kluge to change the
reltargetlist of a possibly-already-planned relation. It seems better
just to skip the optimization when the Var is from an upper query level;
the case is not so common that it's likely anyone will notice a few
wasted cycles.
AFAICT this problem only occurs for uplevel LATERAL references, so
back-patch to 9.3 where LATERAL was added.
Revert the output of the individual backslash commands that change print
settings back to the 9.3 way (not showing the command name in
parentheses). Implement \pset without arguments separately, showing all
settings with values in a table form.
interval precision can only be specified after the "interval" keyword if
no units are specified.
Previously we incorrectly checked the units to see if the precision was
legal, causing confusion.
Report by Alvaro Herrera
Follow our usual style of providing an "extern" for a standard library
function only when we're also providing the implementation. This avoids
issues when the system headers declare the function slightly differently
than we do, as noted by Caleb Welton.
We might have to go to the extent of probing to see if the system headers
declare the function, but let's not do that until it's demonstrated to be
necessary.
Oversight in commit 9e6b1bf258. Back-patch
to all supported branches, as that was.
Nearly all Paths have parents, but a ResultPath representing an empty FROM
clause does not. Avoid a core dump in such cases. I believe this is only
a hazard for debugging usage, not for production, else we'd have heard
about it before. Nonetheless, back-patch to 9.1 where the troublesome code
was introduced. Noted while poking at bug #11703.
Previously pg_receivexlog created new connection for WAL streaming
even though another connection which had been established to create
or delete the replication slot was being left. This caused the unused
connection to be left uselessly until pg_receivexlog exited.
This bug was introduced by the commit d9f38c7.
This patch changes pg_receivexlog so that the connection for
the replication slot is reused for WAL streaming.
Andres Freund, slightly modified by me, reviewed by Michael Paquier
This reverts nearly all of commit 28f6cab61a
in favor of just using the typrelid we already have in pg_dump's TypeInfo
struct for the composite type. As coded, it'd crash if the composite type
had no attributes, since then the query would return no rows.
Back-patch to all supported versions. It seems to not really be a problem
in 9.0 because that version rejects the syntax "create type t as ()", but
we might as well keep the logic similar in all affected branches.
Report and fix by Rushabh Lathia.
pg_dump had the wrong character for update and so was failing when
attempts were made to pg_dump databases with UPDATE policies.
Pointed out by Fujii Masao (thanks!)
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
We've gotten enough push-back on that change to make it clear that it
wasn't an especially good idea to do it like that. Revert plain EXPLAIN
to its previous behavior, but keep the extra output in EXPLAIN ANALYZE.
Per discussion.
Internally, I set this up as a separate flag ExplainState.summary that
controls printing of planning time and execution time. For now it's
just copied from the ANALYZE option, but we could consider exposing it
to users.
Most pg_dump.c global variables, which were passed down individually to
dumping routines, are now grouped as members of the new DumpOptions
struct, which is used as a local variable and passed down into routines
that need it. This helps future development efforts; in particular it
is said to enable a mode in which a parallel pg_dump run can output
multiple streams, and have them restored in parallel.
Also take the opportunity to clean up the pg_dump header files somewhat,
to avoid circularity.
Author: Joachim Wieland, revised by Álvaro Herrera
Reviewed by Peter Eisentraut
LWLockRelease should release all backends waiting with LWLockWaitForVar,
even when another backend has already been woken up to acquire the lock,
i.e. when releaseOK is false. LWLockWaitForVar can return as soon as the
protected value changes, even if the other backend will acquire the lock.
Fix that by resetting releaseOK to true in LWLockWaitForVar, whenever
adding itself to the wait queue.
This should fix the bug reported by MauMau, where the system occasionally
hangs when there is a lot of concurrent WAL activity and a checkpoint.
Backpatch to 9.4, where this code was added.
If we expect batching at the very beginning, we size nbuckets for
"full work_mem" (see how many tuples we can get into work_mem,
while not breaking NTUP_PER_BUCKET threshold).
If we expect to be fine without batching, we start with the 'right'
nbuckets and track the optimal nbuckets as we go (without actually
resizing the hash table). Once we hit work_mem (considering the
optimal nbuckets value), we keep the value.
At the end of the first batch, we check whether (nbuckets !=
nbuckets_optimal) and resize the hash table if needed. Also, we
keep this value for all batches (it's OK because it assumes full
work_mem, and it makes the batchno evaluation trivial). So the
resize happens only once.
There could be cases where it would improve performance to allow
the NTUP_PER_BUCKET threshold to be exceeded to keep everything in
one batch rather than spilling to a second batch, but attempts to
generate such a case have so far been unsuccessful; that issue may
be addressed with a follow-on patch after further investigation.
Tomas Vondra with minor format and comment cleanup by me
Reviewed by Robert Haas, Heikki Linnakangas, and Kevin Grittner
The previous quoting caused "make -C src/bin check" to ignore, rather
than add to, any LD_LIBRARY_PATH content from the environment.
Back-patch to 9.4, where the macro was introduced.
This file used __int64, which is specific to native Windows, rather than
int64. Suppress the long-unused union field of this type. Noticed on
Cygwin x86_64 with -lcrypt not installed. Back-patch to 9.0 (all
supported versions).
List the actions first, as they are the most important options. Group
the other options more sensibly, consistent with the man page. Correct
a few typographical errors, clarify some things.
Also update the pg_receivexlog --help output to make it a bit more
consistent with that of pg_recvlogical.
When determining whether one JSONB object contains another, it's okay to
make a quick exit if the first object has fewer pairs than the second:
because we de-duplicate keys within objects, it is impossible that the
first object has all the keys the second does. However, the code was
applying this rule to JSONB arrays as well, where it does *not* hold
because arrays can contain duplicate entries. The test was really in
the wrong place anyway; we should do it within JsonbDeepContains, where
it can be applied to nested objects not only top-level ones.
Report and test cases by Alexander Korotkov; fix by Peter Geoghegan and
Tom Lane.
The new header contains many prototypes for functions in ruleutils.c
that are not exposed to the SQL level.
Reviewed by Andres Freund and Michael Paquier.
shm_mq_sendv sends a message to the queue assembled from multiple
locations. This is expected to be used by forthcoming patches to
allow frontend/backend protocol messages to be sent via shm_mq, but
might be useful for other purposes as well.
shm_mq_set_handle associates a BackgroundWorkerHandle with an
already-existing shm_mq_handle. This solves a timing problem when
creating a shm_mq to communicate with a newly-launched background
worker: if you attach to the queue first, and the background worker
fails to start, you might block forever trying to do I/O on the queue;
but if you start the background worker first, but then die before
attaching to the queue, the background worrker might block forever
trying to do I/O on the queue. This lets you attach before starting
the worker (so that the worker is protected) and then associate the
BackgroundWorkerHandle later (so that you are also protected).
Patch by me, reviewed by Stephen Frost.
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
The code wrote a value into the caller's field[] array before checking
to see if there was room, which of course is backwards. Per report from
Michael Paquier.
I fixed the equivalent bug in the backend's version of this code way back
in 630684d3a1, but failed to think about ecpg's copy. Fortunately
this doesn't look like it would be exploitable for anything worse than a
core dump: an external attacker would have no control over the single word
that gets written.
CreateReplicationSlot() and DropReplicationSlot() were not cleaning up
the query buffer in some cases (mostly error conditions) which meant a
small leak. Not generally an issue as the error case would result in an
immediate exit, but not difficult to fix either and reduces the number
of false positives from code analyzers.
In passing, also add appropriate PQclear() calls to RunIdentifySystem().
Pointed out by Coverity.
pg_receivexlog already has the capability to use a replication slot to
reserve WAL on the upstream node. But the used slot currently has to
be created via SQL.
To allow using slots directly, without involving SQL, add
--create-slot and --drop-slot actions, analogous to the logical slot
manipulation support in pg_recvlogical.
Author: Michael Paquier
Discussion: CABUevEx+zrOHZOQg+dPapNPFRJdsk59b=TSVf30Z71GnFXhQaw@mail.gmail.com
A future patch (9.5 only) adds slot management to pg_receivexlog. The
verbs create/drop don't seem descriptive enough there. It seems better
to rename pg_recvlogical's commands now, in beta, than live with the
inconsistency forever.
The old form (e.g. --drop) will still be accepted by virtue of most
getopt_long() options accepting abbreviations for long commands.
Backpatch to 9.4 where pg_recvlogical was introduced.
Author: Michael Paquier and Andres Freund
Discussion: CAB7nPqQtt79U6FmhwvgqJmNyWcVCbbV-nS72j_jyPEopERg9rg@mail.gmail.com
Teach sigusr1_handler() to use the same test for whether a worker
might need to be started as ServerLoop(). Aside from being perhaps
a bit simpler, this prevents a potentially-unbounded delay when
starting a background worker. On some platforms, select() doesn't
return when interrupted by a signal, but is instead restarted,
including a reset of the timeout to the originally-requested value.
If signals arrive often enough, but no connection requests arrive,
sigusr1_handler() will be executed repeatedly, but the body of
ServerLoop() won't be reached. This change ensures that, even in
that case, background workers will eventually get launched.
This is far from a perfect fix; really, we need select() to return
control to ServerLoop() after an interrupt, either via the self-pipe
trick or some other mechanism. But that's going to require more
work and discussion, so let's do this for now to at least mitigate
the damage.
Per investigation of test_shm_mq failures on buildfarm member anole.
Most zones in the Russian Federation are subtracting one or two hours
as of 2014-10-26. Update the meanings of the abbreviations IRKT, KRAT,
MAGT, MSK, NOVT, OMST, SAKT, VLAT, YAKT, YEKT to match.
The IANA timezone database has adopted abbreviations of the form AxST/AxDT
for all Australian time zones, reflecting what they believe to be current
majority practice Down Under. These names do not conflict with usage
elsewhere (other than ACST for Acre Summer Time, which has been in disuse
since 1994). Accordingly, adopt these names into our "Default" timezone
abbreviation set. The "Australia" abbreviation set now contains only
CST,EAST,EST,SAST,SAT,WST, all of which are thought to be mostly historical
usage. Note that SAST has also been changed to be South Africa Standard
Time in the "Default" abbreviation set.
Add zone abbreviations SRET (Asia/Srednekolymsk) and XJT (Asia/Urumqi),
and use WSST/WSDT for western Samoa.
Also a DST law change in the Turks & Caicos Islands (America/Grand_Turk),
and numerous corrections for historical time zone data.
This updates known_abbrevs.txt to be what it should have been already,
were my -P patch not broken; and updates some tznames/ entries that
missed getting any love in previous timezone data updates because zic
failed to flag the change of abbreviation.
The non-cosmetic updates:
* Remove references to "ADT" as "Arabia Daylight Time", an abbreviation
that's been out of use since 2007; therefore, claiming there is a conflict
with "Atlantic Daylight Time" doesn't seem especially helpful. (We have
left obsolete entries in the files when they didn't conflict with anything,
but that seems like a different situation.)
* Fix entirely incorrect GMT offsets for CKT (Cook Islands), FJT, FJST
(Fiji); we didn't even have them on the proper side of the date line.
(Seems to have been aboriginal errors in our tznames data; there's no
evidence anything actually changed recently.)
* FKST (Falkland Islands Summer Time) is now used all year round, so
don't mark it as a DST abbreviation.
* Update SAKT (Sakhalin) to mean GMT+11 not GMT+10.
In cosmetic changes, I fixed a bunch of wrong (or at least obsolete)
claims about abbreviations not being present in the zic files, and
tried to be consistent about how obsolete abbreviations are labeled.
Note the underlying timezone/data files are still at release 2014e;
this is just trying to get us in sync with what those files actually
say before we go to the next update.
Peter G pointed out that valgrind was, rightfully, complaining about
CreatePolicy() ending up copying beyond the end of the parsed policy
name. Name is a fixed-size type and we need to use namein (through
DirectFunctionCall1()) to flush out the entire array before we pass
it down to heap_form_tuple.
Michael Paquier pointed out that pg_dump --verbose was missing a
newline and Fabrízio de Royes Mello further pointed out that the
schema was also missing from the messages, so fix those also.
Also, based on an off-list comment from Kevin, rework the psql \d
output to facilitate copy/pasting into a new CREATE or ALTER POLICY
command.
Lastly, improve the pg_policies view and update the documentation for
it, along with a few other minor doc corrections based on an off-list
discussion with Adam Brightwell.
The quick hack I added to zic to dump out currently-in-use timezone
abbreviations turns out to have a nasty bug: within each zone, it was
printing the last "struct ttinfo" to be *defined*, not necessarily the
last one in use. This was mainly a problem in zones that had changed the
meaning of their zone abbreviation (to another GMT offset value) and later
changed it back.
As a result of this error, we'd missed out updating the tznames/ files
for some jurisdictions that have changed their zone abbreviations since
the tznames/ files were originally created. I'll address the missing data
updates in a separate commit.
When there are cost-delay-related storage options set for a table,
trying to make that table participate in the autovacuum cost-limit
balancing algorithm produces undesirable results: instead of using the
configured values, the global values are always used,
as illustrated by Mark Kirkwood in
http://www.postgresql.org/message-id/52FACF15.8020507@catalyst.net.nz
Since the mechanism is already complicated, just disable it for those
cases rather than trying to make it cope. There are undesirable
side-effects from this too, namely that the total I/O impact on the
system will be higher whenever such tables are vacuumed. However, this
is seen as less harmful than slowing down vacuum, because that would
cause bloat to accumulate. Anyway, in the new system it is possible to
tweak options to get the precise behavior one wants, whereas with the
previous system one was simply hosed.
This has been broken forever, so backpatch to all supported branches.
This might affect systems where cost_limit and cost_delay have been set
for individual tables.
The page splitting code would go into infinite recursion if you try to
insert an index tuple that doesn't fit even on an empty page.
Per analysis and suggested fix by Andrew Gierth. Fixes bug #11555, reported
by Bryan Seitz (analysis happened over IRC). Backpatch to all supported
versions.
Testing by Amit Kapila, Andres Freund, and myself, with and without
other patches that also aim to improve scalability, seems to indicate
that this change is a significant win over the current value and over
smaller values such as 64. It's not clear how high we can push this
value before it starts to have negative side-effects elsewhere, but
going this far looks OK.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
Move some more code to manage replication connection command to
streamutil.c. A later patch will introduce replication slot via
pg_receivexlog and this avoid duplicating relevant code between
pg_receivexlog and pg_recvlogical.
Author: Michael Paquier, with some editing by me.
Several comments still referred to 'initiating', 'freeing', 'stopping'
replication slots. These were terms used during different phases of
the development of logical decoding, but are no long accurate.
Also rename StreamLog() to StreamLogicalLog() and add 'void' to the
prototype.
Author: Michael Paquier, with some editing by me.
Backpatch to 9.4 where pg_recvlogical was introduced.
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
DetermineSleepTime() was previously called without blocked
signals. That's not good, because it allows signal handlers to
interrupt its workings.
DetermineSleepTime() was added in 9.3 with the addition of background
workers (da07a1e856), where it only read from
BackgroundWorkerList.
Since 9.4, where dynamic background workers were added (7f7485a0cd),
the list is also manipulated in DetermineSleepTime(). That's bad
because the list now can be persistently corrupted if modified by both
a signal handler and DetermineSleepTime().
This was discovered during the investigation of hangs on buildfarm
member anole. It's unclear whether this bug is the source of these
hangs or not, but it's worth fixing either way. I have confirmed that
it can cause crashes.
It luckily looks like this only can cause problems when bgworkers are
actively used.
Discussion: 20140929193733.GB14400@awork2.anarazel.de
Backpatch to 9.3 where background workers were introduced.
As noted in http://bugs.debian.org/763098 there is a conflict between
postgres' definition of CACHE_LINE_SIZE and the definition by various
*bsd platforms. It's debatable who has the right to define such a
name, but postgres' use was only introduced in 375d8526f2 (9.4), so
it seems like a good idea to rename it.
Discussion: 20140930195756.GC27407@msg.df7cb.de
Per complaint of Christoph Berg in the above email, although he's not
the original bug reporter.
Backpatch to 9.4 where the define was introduced.
Per discussion, revert the commit which added 'ignore_nulls' to
row_to_json. This capability would be better added as an independent
function rather than being bolted on to row_to_json. Additionally,
the implementation didn't address complex JSON objects, and so was
incomplete anyway.
Pointed out by Tom and discussed with Andrew and Robert.
The original design used an array of offsets into the variable-length
portion of a JSONB container. However, such an array is basically
uncompressible by simple compression techniques such as TOAST's LZ
compressor. That's bad enough, but because the offset array is at the
front, it tended to trigger the give-up-after-1KB heuristic in the TOAST
code, so that the entire JSONB object was stored uncompressed; which was
the root cause of bug #11109 from Larry White.
To fix without losing the ability to extract a random array element in O(1)
time, change this scheme so that most of the JEntry array elements hold
lengths rather than offsets. With data that's compressible at all, there
tend to be fewer distinct element lengths, so that there is scope for
compression of the JEntry array. Every N'th entry is still an offset.
To determine the length or offset of any specific element, we might have
to examine up to N preceding JEntrys, but that's still O(1) so far as the
total container size is concerned. Testing shows that this cost is
negligible compared to other costs of accessing a JSONB field, and that
the method does largely fix the incompressible-data problem.
While at it, rearrange the order of elements in a JSONB object so that
it's "all the keys, then all the values" not alternating keys and values.
This doesn't really make much difference right at the moment, but it will
allow providing a fast path for extracting individual object fields from
large JSONB values stored EXTERNAL (ie, uncompressed), analogously to the
existing optimization for substring extraction from large EXTERNAL text
values.
Bump catversion to denote the incompatibility in on-disk format.
We will need to fix pg_upgrade to disallow upgrading jsonb data stored
with 9.4 betas 1 and 2.
Heikki Linnakangas and Tom Lane
Andres pointed out that there was an extra ';' in equalPolicies, which
made me realize that my prior testing with CLOBBER_CACHE_ALWAYS was
insufficient (it didn't always catch the issue, just most of the time).
Thanks to that, a different issue was discovered, specifically in
equalRSDescs. This change corrects eqaulRSDescs to return 'true' once
all policies have been confirmed logically identical. After stepping
through both functions to ensure correct behavior, I ran this for
about 12 hours of CLOBBER_CACHE_ALWAYS runs of the regression tests
with no failures.
In addition, correct a few typos in the documentation which were pointed
out by Thom Brown (thanks!) and improve the policy documentation further
by adding a flushed out usage example based on a unix passwd file.
Lastly, clean up a few comments in the regression tests and pg_dump.h.
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Robert Haas and Tom Lane
* Don't play tricks for a more efficient pg_atomic_clear_flag() in the
generic gcc implementation. The old version was broken on gcc < 4.7
on !x86 platforms. Per buildfarm member chipmunk.
* Make usage of __atomic() fences depend on HAVE_GCC__ATOMIC_INT32_CAS
instead of HAVE_GCC__ATOMIC_INT64_CAS - there's platforms with 32bit
support that don't support 64bit atomics.
* Blindly fix two superflous #endif in generic-xlc.h
* Check for --disable-atomics in platforms but x86.
Some x86 32bit versions of gcc apparently generate references to the
nonexistant %sil register when using when using the r input
constraint, but not with the =q constraint. The latter restricts
allocations to a/b/c/d which should all work.
Several upcoming performance/scalability improvements require atomic
operations. This new API avoids the need to splatter compiler and
architecture dependent code over all the locations employing atomic
ops.
For several of the potential usages it'd be problematic to maintain
both, a atomics using implementation and one using spinlocks or
similar. In all likelihood one of the implementations would not get
tested regularly under concurrency. To avoid that scenario the new API
provides a automatic fallback of atomic operations to spinlocks. All
properties of atomic operations are maintained. This fallback -
obviously - isn't as fast as just using atomic ops, but it's not bad
either. For one of the future users the atomics ontop spinlocks
implementation was actually slightly faster than the old purely
spinlock using implementation. That's important because it reduces the
fear of regressing older platforms when improving the scalability for
new ones.
The API, loosely modeled after the C11 atomics support, currently
provides 'atomic flags' and 32 bit unsigned integers. If the platform
efficiently supports atomic 64 bit unsigned integers those are also
provided.
To implement atomics support for a platform/architecture/compiler for
a type of atomics 32bit compare and exchange needs to be
implemented. If available and more efficient native support for flags,
32 bit atomic addition, and corresponding 64 bit operations may also
be provided. Additional useful atomic operations are implemented
generically ontop of these.
The implementation for various versions of gcc, msvc and sun studio have
been tested. Additional existing stub implementations for
* Intel icc
* HUPX acc
* IBM xlc
are included but have never been tested. These will likely require
fixes based on buildfarm and user feedback.
As atomic operations also require barriers for some operations the
existing barrier support has been moved into the atomics code.
Author: Andres Freund with contributions from Oskari Saarenmaa
Reviewed-By: Amit Kapila, Robert Haas, Heikki Linnakangas and Álvaro Herrera
Discussion: CA+TgmoYBW+ux5-8Ja=Mcyuy8=VXAnVRHp3Kess6Pn3DMXAPAEA@mail.gmail.com,
20131015123303.GH5300@awork2.anarazel.de,
20131028205522.GI20248@awork2.anarazel.de
We removed a similar ban on this in json_object recently, but the ban in
datum_to_json was left, which generate4d sprutious errors in othee json
generators, notable json_build_object.
Along the way, add an assertion that datum_to_json is not passed a null
key. All current callers comply with this rule, but the assertion will
catch any possible future misbehaviour.
Previously, we used an lwlock that was held from the time we began
seeking a candidate buffer until the time when we found and pinned
one, which is disastrous for concurrency. Instead, use a spinlock
which is held just long enough to pop the freelist or advance the
clock sweep hand, and then released. If we need to advance the clock
sweep further, we reacquire the spinlock once per buffer.
This represents a significant increase in atomic operations around
buffer eviction, but it still wins on many workloads. On others, it
may result in no gain, or even cause a regression, unless the number
of buffer mapping locks is also increased. However, that seems like
material for a separate commit. We may also need to consider other
methods of mitigating contention on this spinlock, such as splitting
it into multiple locks or jumping the clock sweep hand more than one
buffer at a time, but those, too, seem like separate improvements.
Patch by me, inspired by a much larger patch from Amit Kapila.
Reviewed by Andres Freund.
Some compilers don't automatically search the current directory for
included files. 9cc2c182fc fixed that for builds from tarballs by
adding an include to the source directory. But that doesn't work when
the scanner is generated in the VPATH directory. Use the same search
path as the other parsers in the tree.
One compiler that definitely was affected is solaris' sun cc.
Backpatch to 9.1 which introduced using an actual parser for
replication commands.
It was confusing that to other commands, like initdb and postgres, you would
pass the data directory with "-D datadir", but pg_controldata and
pg_resetxlog would take just plain path, without the "-D". With this patch,
pg_controldata and pg_resetxlog also accept "-D datadir".
Abhijit Menon-Sen, with minor kibitzing by me
Address a few typos in the row security update, pointed out
off-list by Adam Brightwell. Also include 'ALL' in the list
of commands supported, for completeness.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
This function created new Vars with varno different from varnoold, which
is a condition that should never prevail before setrefs.c does the final
variable-renumbering pass. The created Vars could not be seen as equal()
to normal Vars, which among other things broke equivalence-class processing
for them. The consequences of this were indeed visible in the regression
tests, in the form of failure to propagate constants as one would expect.
I stumbled across it while poking at bug #11457 --- after intentionally
disabling join equivalence processing, the security-barrier regression
tests started falling over with fun errors like "could not find pathkey
item to sort", because of failure to match the corrupted Vars to normal
ones.
When the number of allowed iterations is limited (either a "?" quantifier
or a bound expression), the last sub-match has to reach to the end of the
target string. The previous coding here first tried the shortest possible
match (one character, usually) and then gave up and back-tracked if that
didn't work, typically leading to failure to match overall, as shown in
bug #11478 from Christoph Berg. The minimum change to fix that would be to
not decrement k before "goto backtrack"; but that would be a pretty stupid
solution, because we'd laboriously try each possible sub-match length
before finally discovering that only ending at the end can work. Instead,
force the sub-match endpoint limit up to the end for even the first
shortest() call if we cannot have any more sub-matches after this one.
Bug introduced in my rewrite that added the iterdissect logic, commit
173e29aa5d. The shortest-first search code
was too closely modeled on the longest-first code, which hasn't got this
issue since it tries a match reaching to the end to start with anyway.
Back-patch to all affected branches.
In a2dabf0 we added the ability to have single or double unicode
linestyle for the border, column, or header. Unfortunately, the
\? variables output was not updated for these new psql variables.
This corrects that oversight.
Patch by Pavel Stehule.
Per discussion in bug #11350, log ALTER SYSTEM commands at the
log_statement=ddl level, rather than at the log_statement=all level.
Pointed out by Tomonari Katsumata.
Back-patch to 9.4 where ALTER SYSTEM was introduced.
While withCheckOption exprs had been handled in many cases by
happenstance, they need to be handled during set_plan_references and
more specifically down in set_plan_refs for ModifyTable plan nodes.
This is to ensure that the opfuncid's are set for operators referenced
in the withCheckOption exprs.
Identified as an issue by Thom Brown
Patch by Dean Rasheed
Back-patch to 9.4, where withCheckOption was introduced.
For the reason outlined in df4077cda2 also remove volatile qualifiers
from xlog.c. Some of these uses of volatile have been added after
noticing problems back when spinlocks didn't imply compiler
barriers. So they are a good test - in fact removing the volatiles
breaks when done without the barriers in spinlocks present.
Several uses of volatile remain where they are explicitly used to
access shared memory without locks. These locations are ok with
slightly out of date data, but removing the volatile might lead to the
variables never being reread from memory. These uses could also be
replaced by barriers, but that's a separate change of doubtful value.
Now that spinlocks (hopefully!) act as compiler barriers, as of commit
0709b7ee72, this should be safe. This
serves as a demonstration of the new coding style, and may be optimized
better on some machines as well.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
Testing reveals that that doing a memcmp() before the strcoll() costs
practically nothing, at least on the systems we tested, and it speeds
up sorts containing many equal strings significatly.
Peter Geoghegan. Review by myself and Heikki Linnakangas. Comments
rewritten by me.
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
x86's memory barrier assembly was marked as clobbering "memory" but
not "cc" even though 'addl' sets various flags. As it turns out gcc on
x86 implicitly assumes "cc" on every inline assembler statement, so
it's not a bug. But as that's poorly documented and might get copied
to architectures or compilers where that's not the case, it seems
better to be precise.
Discussion: 20140919100016.GH4277@alap3.anarazel.de
To keep the code common, backpatch to 9.2 where explicit memory
barriers were introduced.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Add some quotes in the makefile snippet that creates the temporary
installation, so that it can handle spaces in the directory name and
possibly some other oddities.
They were marked to return a boolean, but they actually return a
GinTernaryValue, which is more like a "char". It makes no practical
difference, as the triConsistent functions cannot be called directly from
SQL because they have "internal" arguments, but this nevertheless seems
more correct.
Also fix the GinTernaryValue name in the documentation. I renamed the enum
earlier, but neglected the docs.
Alexander Korotkov. This is new in 9.4, so backpatch there.
The RFCs say that the CN must not be checked if a subjectAltName extension
of type dNSName is present. IOW, if subjectAltName extension is present,
but there are no dNSNames, we can still check the CN.
Alexey Klyukin
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
Instead of just erroring out when a tool is missing, wrap the call with
the "missing" script that we are already using for bison, flex, and
perl, so that the users get a useful error message.
Since this makes the bucket headers use ~10x as much memory, properly
account for that memory when we figure out whether everything fits
in work_mem. This might result in some cases that previously used
only a single batch getting split into multiple batches, but it's
unclear as yet whether we need defenses against that case, and if so,
what the shape of those defenses should be.
It's worth noting that even in these edge cases, users should still be
no worse off than they would have been last week, because commit
45f6240a8f saved a big pile of memory
on exactly the same workloads.
Tomas Vondra, reviewed and somewhat revised by me.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
With the unicode linestyle, this adds support to control if the
column, header, or border style should be single or double line
unicode characters. The default remains 'single'.
In passing, clean up the border documentation and address some
minor formatting/spelling issues.
Pavel Stehule, with some additional changes by me.
In psql, expanded mode was not being displayed correctly when using
the normal ascii or unicode linestyles and border set to '3'. Now,
per the documentation, border '3' is really only sensible for HTML
and LaTeX formats, however, that's no excuse for ascii/unicode to
break in that case, and provisions had been made for psql to cleanly
handle this case (and it did, in non-expanded mode).
This was broken when ascii/unicode was initially added a good five
years ago because print_aligned_vertical_line wasn't passed in the
border setting being used by print_aligned_vertical but instead was
given the whole printTableContent. There really isn't a good reason
for vertical_line to have the entire printTableContent structure, so
just pass in the printTextFormat and border setting (similar to how
this is handled in horizontal_line).
Pointed out by Pavel Stehule, fix by me.
Back-patch to all currently-supported versions.
This patch makes libpq check the server's hostname against DNS names listed
in the X509 subjectAltName extension field in the server certificate. This
allows the same certificate to be used for multiple domain names. If there
are no SANs in the certificate, the Common Name field is used, like before
this patch. If both are given, the Common Name is ignored. That is a bit
surprising, but that's the behavior mandated by the relevant RFCs, and it's
also what the common web browsers do.
This also adds a libpq_ngettext helper macro to allow plural messages to be
translated in libpq. Apparently this happened to be the first plural message
in libpq, so it was not needed before.
Alexey Klyukin, with some kibitzing by me.
The code that tried to split a page at 75/25 ratio, when appending to the
end of an index, was buggy in two ways. First, there was a silly typo that
caused it to just fill the left page as full as possible. But the logic as
it was intended wasn't correct either, and would actually have given a ratio
closer to 60/40 than 75/25.
Gaetano Mendola spotted the typo. Backpatch to 9.4, where this code was added.
The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
When running vacuumdb --analyze-in-stages --all, it needs to run the
first stage across all databases before the second one, instead of
running all stages in a database before processing the next one.
Also respect the --quiet option with --analyze-in-stages.
Provide an option to skip NULL values in a row when generating a JSON
object from that row with row_to_json. This can reduce the size of the
JSON object in cases where columns are NULL without really reducing the
information in the JSON object.
This also makes row_to_json into a single function with default values,
rather than having multiple functions. In passing, change array_to_json
to also be a single function with default values (we don't add an
'ignore_nulls' option yet- it's not clear that there is a sensible
use-case there, and it hasn't been asked for in any case).
Pavel Stehule
Apparently, older versions of "prove" (couldn't identify the exact
version from the changelog) don't look into the t/ directory for tests
by default, so specify it explicitly.
Instead of palloc'ing each HashJoinTuple individually, allocate 32kB chunks
and pack the tuples densely in the chunks. This avoids the AllocChunk
header overhead, and the space wasted by standard allocator's habit of
rounding sizes up to the nearest power of two.
This doesn't contain any planner changes, because the planner's estimate of
memory usage ignores the palloc overhead. Now that the overhead is smaller,
the planner's estimates are in fact more accurate.
Tomas Vondra, reviewed by Robert Haas.
07c8651dd9 currently causes compilation errors on mscv (and
probably some other) compilers because our getopt_long()
implementation doesn't have support for optional_argument.
Thus implement optional_argument in our fallback implemenation. It's
quite possibly also useful in other cases.
Arguably this needs a configure check for optional_argument, but it
has existed pretty much since getopt_long() was introduced and thus
doesn't seem worth the configure runtime.
Normally I'd would not push a patch this fast, but this allows msvc to
build again and has low risk as only optional_argument behaviour has
changed.
Author: Michael Paquier and Andres Freund
Discussion: CAB7nPqS5VeedSCxrK=QouokbawgGKLpyc1Q++RRFCa_sjcSVrg@mail.gmail.com
The code I added in commit f343a880d5 was
careless about preserving AND/OR flatness: it could create a structure with
an OR node directly underneath another one. That breaks an assumption
that's fairly important for planning efficiency, not to mention triggering
various Asserts (as reported by Benjamin Smith). Add a trifle more logic
to handle the case properly.
Add --help=<topic> for the commandline, and \? <topic> as a backslash
command, to show more help than the invocations without parameters
do. "commands", "variables" and "options" currently exist as help
topics describing, respectively, backslash commands, psql variables,
and commandline switches. Without parameters the help commands show
their previous topic.
Some further wordsmithing or extending of the added help content might
be needed; but there seems little benefit delaying the overall feature
further.
Author: Pavel Stehule, editorialized by many
Reviewed-By: Andres Freund, Petr Jelinek, Fujii Masao, MauMau, Abhijit
Menon-Sen and Erik Rijkers.
Discussion: CAFj8pRDVGuC-nXBfe2CK8vpyzd2Dsr9GVpbrATAnZO=2YQ0s2Q@mail.gmail.com,
CAFj8pRA54AbTv2RXDTRxiAd8hy8wxmoVLqhJDRCwEnhdd7OUkw@mail.gmail.com
Previously, they functioned as barriers against CPU reordering but not
compiler reordering, an odd API that required extensive use of volatile
everywhere that spinlocks are used. That's error-prone and has negative
implications for performance, so change it.
In theory, this makes it safe to remove many of the uses of volatile
that we currently have in our code base, but we may find that there are
some bugs in this effort when we do. In the long run, though, this
should make for much more maintainable code.
Patch by me. Review by Andres Freund.
This provides a convenient method of classifying input values into buckets
that are not necessarily equal-width. It works on any sortable data type.
The choice of function name is a bit debatable, perhaps, but showing that
there's a relationship to the SQL standard's width_bucket() function seems
more attractive than the other proposals.
Petr Jelinek, reviewed by Pavel Stehule
The xml type previously rejected "content" that is empty or consists
only of spaces. But the SQL/XML standard allows that, so change that.
The accepted values for XML "documents" are not changed.
Reviewed-by: Ali Akbar <the.apaan@gmail.com>
Now that ALTER TABLE .. ALL IN TABLESPACE has replaced the previous
ALTER TABLESPACE approach, it makes sense to move the calls down in
to ProcessUtilitySlow where the rest of ALTER TABLE is handled.
This also means that event triggers will support ALTER TABLE .. ALL
(which was the impetus for the original change, though it has other
good qualities also).
Álvaro Herrera
Back-patch to 9.4 as the original rework was.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
Update the tab completion for the changes made in
3c4cf08087, which rework 'MOVE ALL' to be
'ALTER .. ALL IN TABLESPACE'.
Fujii Masao
Back-patch to 9.4, as the original change was.
Previously \watch could not display the query execution time even
when \timing was enabled because it used PSQLexec instead of
SendQuery and that function didn't support \timing. This patch
introduces PSQLexecWatch and changes \watch so as to use it, instead.
PSQLexecWatch is the function to run the query, print its results and
display how long it took (only when \timing is enabled).
This patch also changes --echo-hidden so that it doesn't print
the query that \watch executes. Since \watch cannot execute
backslash command queries, they should not be printed even
when --echo-hidden is set.
Patch by me, review by Heikki Linnakangas and Michael Paquier
The number of % parameter markers in RAISE statement should match the number
of parameters given. We used to check that at execution time, but we have
all the information needed at compile time, so let's check it at compile
time instead. It's generally better to find mistakes earlier.
Marko Tiikkaja, reviewed by Fabien Coelho
Every redo routine uses the same idiom to determine what to do to a page:
check if there's a backup block for it, and if not read, the buffer if the
block exists, and check its LSN. Refactor that into a common function,
XLogReadBufferForRedo, making all the redo routines shorter and more
readable.
This has no user-visible effect, and makes no changes to the WAL format.
Reviewed by Andres Freund, Alvaro Herrera, Michael Paquier.
The new %l substitution shows the line number inside a (potentially
multi-line) statement starting from one.
Author: Sawada Masahiko, heavily editorialized by me.
Reviewed-By: Jeevan Chalke, Alvaro Herrera
This patch allows us to execute ALTER SYSTEM RESET command to
remove the configuration entry from postgresql.auto.conf.
Vik Fearing, reviewed by Amit Kapila and me.
68a2e52bba has introduced LWLockAcquireCommon() containing the
previous contents of LWLockAcquire() plus added functionality. The
latter then calls it, just like LWLockAcquireWithVar(). Because the
majority of callers don't need the added functionality, declare the
common code as inline. The compiler then can optimize away the unused
code. Doing so is also useful when looking at profiles, to
differentiate the users.
Backpatch to 9.4, the first branch to contain LWLockAcquireCommon().
Since the dawn of time (aka Postgres95) multiple pins of the same
buffer by one backend have been optimized not to modify the shared
refcount more than once. This optimization has always used a NBuffer
sized array in each backend keeping track of a backend's pins.
That array (PrivateRefCount) was one of the biggest per-backend memory
allocations, depending on the shared_buffers setting. Besides the
waste of memory it also has proven to be a performance bottleneck when
assertions are enabled as we make sure that there's no remaining pins
left at the end of transactions. Also, on servers with lots of memory
and a correspondingly high shared_buffers setting the amount of random
memory accesses can also lead to poor cpu cache efficiency.
Because of these reasons a backend's buffers pins are now kept track
of in a small statically sized array that overflows into a hash table
when necessary. Benchmarks have shown neutral to positive performance
results with considerably lower memory usage.
Patch by me, review by Robert Haas.
Discussion: 20140321182231.GA17111@alap3.anarazel.de
The list of posting lists it's dealing with can contain placeholders for
deleted posting lists. The placeholders are kept around so that they can
be WAL-logged, but we must be careful to not try to access them.
This fixes bug #11280, reported by Mårten Svantesson. Backpatch to 9.4,
where the compressed data leaf page code was added.
This reverts commit e23014f3d4.
As the side effect of the reverted commit, when the unit is
specified, the reloption was stored in the catalog with the unit.
This broke pg_dump (specifically, it prevented pg_dump from
outputting restorable backup regarding the reloption) and
turned the buildfarm red. Revert the commit until the fixed
version is ready.
This is useful to allow to set GUCs to values that include spaces;
something that wasn't previously possible. The primary case motivating
this is the desire to set default_transaction_isolation to 'repeatable
read' on a per connection basis, but other usecases like seach_path do
also exist.
This introduces a slight backward incompatibility: Previously a \ in
an option value would have been passed on literally, now it'll be
taken as an escape.
The relevant mailing list discussion starts with
20140204125823.GJ12016@awork2.anarazel.de.
This introduces an infrastructure which allows us to specify the units
like ms (milliseconds) in integer relation option, like GUC parameter.
Currently only autovacuum_vacuum_cost_delay reloption can accept
the units.
Reviewed by Michael Paquier
Previously, only a single-byte character was allowed as an
escape. This patch allows it to be a multi-byte character, though it
still must be a single character.
Reviewed by Heikki Linnakangas and Tom Lane.
If SELECT FOR UPDATE NOWAIT tries to lock a tuple that is concurrently
being updated, it might fail to honor its NOWAIT specification and block
instead of raising an error.
Fix by adding a no-wait flag to EvalPlanQualFetch which it can pass down
to heap_lock_tuple; also use it in EvalPlanQualFetch itself to avoid
blocking while waiting for a concurrent transaction.
Authors: Craig Ringer and Thomas Munro, tweaked by Álvaro
http://www.postgresql.org/message-id/51FB6703.9090801@2ndquadrant.com
Per Thomas Munro in the course of his SKIP LOCKED feature submission,
who also provided one of the isolation test specs.
Backpatch to 9.4, because that's as far back as it applies without
conflicts (although the bug goes all the way back). To that branch also
backpatch Thomas Munro's new NOWAIT test cases, committed in master by
Heikki as commit 9ee16b49f0 .
In some cases, not all Vars were being correctly marked as having been
modified for updatable security barrier views, which resulted in invalid
plans (eg: when security barrier views were created over top of
inheiritance structures).
In passing, be sure to update both varattno and varonattno, as _equalVar
won't consider the Vars identical otherwise. This isn't known to cause
any issues with updatable security barrier views, but was noticed as
missing while working on RLS and makes sense to get fixed.
Back-patch to 9.4 where updatable security barrier views were
introduced.
Use SECURITY_LOCAL_USERID_CHANGE while building temporary tables;
only escalate to SECURITY_RESTRICTED_OPERATION while potentially
running user-supplied code. The more secure mode was preventing
temp table creation. Add regression tests to cover this problem.
This fixes Bug #11208 reported by Bruno Emanuel de Andrade Silva.
Backpatch to 9.4, where the bug was introduced.
Prevent automatic oid assignment when in binary upgrade mode. Also
throw an error when contrib/pg_upgrade_support functions are called when
not in binary upgrade mode.
This prevent automatically-assigned oids from conflicting with later
pre-assigned oids coming from the old cluster. It also makes sure oids
are preserved in call important cases.
There's no point in setting up a context error callback when doing
conditional lock acquisition, because we never actually wait and so the
user wouldn't be able to see the context message anywhere. In fact,
this is more in line with what ConditionalXactLockTableWait is doing.
Backpatch to 9.4, where this was added.
The symbol was added by 71901ab6d; the original code was introduced by
6868ed749. Development of both overlapped which is why we apparently
failed to notice.
This is a (very slight) behavior change, so I'm not backpatching this to
9.4 for now, even though the symbol does exist there.
Event triggers want to know the OID of the interesting object created,
which is the main type. The array created as part of the operation is
just a subsidiary object which is not of much interest.
Other DDL commands are already returning the OID, which is required for
future additional event trigger work. This is merely making these
commands in line with the rest of utility command support.
Add a succint comment explaining why it's correct to change the
persistence in this way. Also s/loggedness/persistence/ because native
speakers didn't like the latter term.
Fabrízio and Álvaro
CheckConstraintFetch() leaked a cstring in the caller's context for each
CHECK constraint expression it copied into the relcache. Ordinarily that
isn't problematic, but it can be during CLOBBER_CACHE testing because so
many reloads can happen during a single query; so complicate the code
slightly to allow freeing the cstring after use. Per testing on buildfarm
member barnacle.
This is exactly like the leak fixed in AttrDefaultFetch() by commit
078b2ed291. (Yes, this time I did look for
other instances of the same coding pattern :-(.) Like that patch, no
back-patch, since it seems unlikely that there's any problem except under
very artificial test conditions.
BTW, it strikes me that both of these places would require further work
comparable to commit ab8c84db2f, if we ever
supported defaults or check constraints on system catalogs: they both
assume they are copying into an empty relcache data structure, and that
conceivably wouldn't be the case during recursive reloading of a system
catalog. This does not seem worth worrying about for the moment, since
there is no near-term prospect of supporting any such thing. So I'll
just note the possibility for the archives' sake.
Add a note that some options can be specified multiple times to select
multiple objects to restore. This replaces the somewhat confusing use
of plurals in the option descriptions themselves.
This enables changing permanent (logged) tables to unlogged and
vice-versa.
(Docs for ALTER TABLE / SET TABLESPACE got shuffled in an order that
hopefully makes more sense than the original.)
Author: Fabrízio de Royes Mello
Reviewed by: Christoph Berg, Andres Freund, Thom Brown
Some tweaking by Álvaro Herrera
Cause the path extraction operators to return their lefthand input,
not NULL, if the path array has no elements. This seems more consistent
since the case ought to correspond to applying the simple extraction
operator (->) zero times.
Cause other corner cases in field/element/path extraction to return NULL
rather than failing. This behavior is arguably more useful than throwing
an error, since it allows an expression index using these operators to be
built even when not all values in the column are suitable for the
extraction being indexed. Moreover, we already had multiple
inconsistencies between the path extraction operators and the simple
extraction operators, as well as inconsistencies between the JSON and
JSONB code paths. Adopt a uniform rule of returning NULL rather than
throwing an error when the JSON input does not have a structure that
permits the request to be satisfied.
Back-patch to 9.4. Update the release notes to list this as a behavior
change since 9.3.
Previously, we would first create the symlinks the way they are in the
original system, and at the end replace them with the mapped symlinks.
That never really made much sense, so now we create the symlink pointing
to the correct location to begin with, so that there's no need to fix
them at the end.
The old coding didn't work correctly on Windows, because Windows junction
points look more like directories than files, and ought to be removed with
rmdir rather than unlink. Also, it incorrectly used "%d" rather than "%u"
to print an Oid, but that's gone now.
Report and patch by Amit Kapila, with minor changes by me. Reviewed by
MauMau. Backpatch to 9.4, where the --tablespace feature was added.
As 'ALTER TABLESPACE .. MOVE ALL' really didn't change the tablespace
but instead changed objects inside tablespaces, it made sense to
rework the syntax and supporting functions to operate under the
'ALTER (TABLE|INDEX|MATERIALIZED VIEW)' syntax and to be in
tablecmds.c.
Pointed out by Alvaro, who also suggested the new syntax.
Back-patch to 9.4.
We have had INT64_FORMAT and UINT64_FORMAT for a long time, but that's not
good enough if you want something more exotic, like "%20lld".
Abhijit Menon-Sen, per Andres Freund's suggestion.
Cover some cases I omitted before, such as null and empty-string
elements in the path array. This exposes another inconsistency:
json_extract_path complains about empty path elements but
jsonb_extract_path does not.
jsonb's #> operator segfaulted (dereferencing a null pointer) if the RHS
was a zero-length array, as reported in bug #11207 from Justin Van Winkle.
json's #> operator returns NULL in such cases, so for the moment let's
make jsonb act likewise.
Also add a bunch of regression test queries memorializing the -> and #>
operators' behavior for this and other corner cases.
There is a good argument for changing some of these behaviors, as they
are not very consistent with each other, and throwing an error isn't
necessarily a desirable behavior for operators that are likely to be
used in indexes. However, everybody can agree that a core dump is the
Wrong Thing, and we need test cases even if we decide to change their
expected output later.
While the space is optional, it seems nicer to be consistent with what
you get if you do "SET search_path=...". SET always normalizes the
separator to be comma+space.
Christoph Martin
This reverts commit 083d29c65b.
The commit changed the code so that it causes an errors when
IDENTIFY_SYSTEM returns three columns. But which prevents us
from using the replication-related utilities against the server
with older version. This is not what we want. For that
compatibility, we allow the utilities to receive three columns
as the result of IDENTIFY_SYSTEM eventhough it actually returns
four columns in 9.4 or later.
Pointed out by Andres Freund.
5a991ef869 added new column into
the result of IDENTIFY_SYSTEM command. But it was not reflected into
several codes checking that result. Specifically though the number of
columns in the result was increased to 4, it was still compared with 3
in some replication codes.
Back-patch to 9.4 where the number of columns in IDENTIFY_SYSTEM
result was increased.
Report from Michael Paquier
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
In support of this, have the MSVC build follow GNU make in preferring
GNUmakefile over Makefile when a directory contains both.
Michael Paquier, reviewed by MauMau.
strncmp() is a specialized API unsuited for routine copying into
fixed-size buffers. On a system where the length of a single filename
can exceed MAXPGPATH, the pg_archivecleanup change prevents a simple
crash in the subsequent strlen(). Few filesystems support names that
long, and calling pg_archivecleanup with untrusted input is still not a
credible use case. Therefore, no back-patch.
David Rowley
Move the functions within the file so that public interface functions come
first, followed by internal functions. Previously, be_tls_write was first,
then internal stuff, and finally the rest of the public interface, which
clearly didn't make much sense.
Per Andres Freund's complaint.
Commit f30015b6d7 made this happen for
timestamp and timestamptz, but it seems pretty inconsistent to not
do it for simple dates as well.
(In passing, I re-pgindent'd json.c.)
PG_RETURN_BOOL() should only be used in functions following the V1 SQL
function API. This coding accidentally fails to fail since letting the
compiler coerce the Datum representation of bool back to plain bool
does give the right answer; but that doesn't make it a good idea.
Back-patch to older branches just to avoid unnecessary code divergence.
Make lists of the names of all operators that are claimed to be commutator
pairs or negator pairs. This is analogous to the existing queries that
make lists of all operator names appearing in particular opclass strategy
slots. Unexpected additions to these lists are likely to be mistakes; had
we had these queries in place before, bug #11178 might've been prevented.
<@ and @> are each other's commutators, but they were incorrectly marked
as being each other's negators instead. (This was actually questioned
in a comment in the original commit, but nobody followed through :-(.)
Per bug #11178 from Christian Pronovost.
In passing, fix some JSONB operator descriptions that were randomly
different from the phrasing of every other similar description.
catversion bump for pg_catalog contents change.
When the TAP tests are run in-tree (make check), set the shared library
path using the appropriate environment variable, using a logic similar
to pg_regress, so that the right libraries are used.
This provides a small but worthwhile speedup when sorting text, at least
in cases to which the sortsupport machinery applies.
Robert Haas and Peter Geoghegan
Previously the help message described that -m is an option for
"stop", "restart" and "promote" commands in pg_ctl. But actually
that's not an option for "promote". So this commit fixes that
incorrect description in the help message.
Back-patch to 9.3 where the incorrect description was added.
parseRelOptions() tended to leak memory in the caller's context. Most
of the time this doesn't really matter since the caller's context is
at most query-lifespan, and the function won't be invoked very many times.
However, when testing with CLOBBER_CACHE_RECURSIVELY, the same relcache
entry can get rebuilt a *lot* of times in one query, leading to significant
intraquery memory bloat if it has any reloptions. Noted while
investigating a related report from Tomas Vondra.
In passing, get rid of some Asserts that are redundant with the one
done by deconstruct_array().
As with other patches to avoid leaks in CLOBBER_CACHE testing, it doesn't
really seem worth back-patching this.
When replacing rd_indexlist, rd_indexattr, etc, we neglected to pfree any
old value of these fields. Under ordinary circumstances, the old value
would always be NULL, so this seemed reasonable enough. However, in cases
where we're rebuilding a system catalog's relcache entry and another cache
flush occurs on that same catalog meanwhile, it's possible for the field to
not be NULL when we return to the outer level, because we already refilled
it while recovering from the inner flush. This leads to a fairly small
session-lifespan leak in CacheMemoryContext. In real-world usage the leak
would be too small to notice; but in testing with CLOBBER_CACHE_RECURSIVELY
the leakage can add up to the point of causing OOM failures, as reported by
Tomas Vondra.
The issue has been there a long time, but it only seems worth fixing in
HEAD, like the previous fix in this area (commit 078b2ed291).
This option is equivalent to --slot option which pg_receivexlog has
already supported, which specifies the replication slot to use for
WAL streaming. pg_recvlogical has already supported both options,
and this commit makes pg_receivexlog consistent with pg_recvlogical
regarding the slot option.
Back-patch to 9.4 where the slot option was added.
Michael Paquier
Some error messages complained about --init and --stop being used
whereas the --create and --drop are the correct verbs. Fix that.
Also a XLogRecPtr was tested in a boolean fashion instead of being
compared to InvalidXLogRecPtr.
Backpatch to 9.4 where pg_recvlogical was introduced.
Michael Paquier
When doing logical decoding using START_LOGICAL_REPLICATION in a
walsender process the walsender sometimes was sending out keepalive
messages too frequently. Asking for feedback every time.
WalSndWaitForWal() sends out keepalive messages when it's waiting for
new WAL to be generated locally when it sees that the remote side
hasn't yet flushed WAL up to the local position. That generally is
good but causes problems if the remote side only writes but doesn't
flush changes yet. So check for both remote write and flush position.
Additionally we've asked for feedback to the keepalive message which
isn't warranted when waiting for WAL in contrast to preventing
timeouts because of wal_sender_timeout.
Complaint and patch by Steve Singer.
When both postgresql.conf and postgresql.auto.conf have their own entry of
the same parameter, PostgreSQL uses the entry in postgresql.auto.conf because
it appears last in the configuration scan. IOW, the other entries which appear
earlier are ignored. But, previously, ProcessConfigFile() detected the invalid
settings of even those unused entries and emitted the error messages
complaining about them, at postmaster startup. Complaining about the entries
to ignore is basically useless.
This problem happened because ProcessConfigFile() was called twice at
postmaster startup and the first call read only postgresql.conf. That is, the
first call could check the entry which might be ignored eventually by
the second call which read both postgresql.conf and postgresql.auto.conf.
To work around the problem, this commit changes ProcessConfigFile so that
its first call processes only data_directory and the second one does all the
entries. It's OK to process data_directory in the first call because it's
ensured that data_directory doesn't exist in postgresql.auto.conf.
Back-patch to 9.4 where postgresql.auto.conf was added.
Patch by me. Review by Amit Kapila
This commit also changes tab-completion for \set so that it displays
all the special variables like COMP_KEYWORD_CASE. Previously it displayed
only variables having the set values. Which was not user-friendly for
those who want to set the unset variables.
This commit also changes tab-completion for :variable so that only the
variables having the set values are displayed. Previously even unset
variables were displayed.
Pavel Stehule, modified by me.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
There's actually no need for any special case for unknown-type literals,
since we only need to push the value through its output function and
unknownout() works fine. The code that was here was completely bizarre
anyway, and would fail outright in cases that should work, not to mention
suffering from some copy-and-paste bugs.
Fix an obvious typo in json_build_object()'s complaint about invalid
number of arguments, and make the errhint a bit more sensible too.
Per discussion about how to word the improved hint, change the few places
in the documentation that refer to JSON object field names as "names" to
say "keys" instead, since that's what we've said in the vast majority of
places in the docs. Arguably "name" is more correct, since that's the
terminology used in RFC 7159; but we're stuck with "key" in view of the
naming of json_object_keys() so let's at least be self-consistent.
I adjusted a few code comments to match this as well, and failed to
resist the temptation to clean up some odd whitespace choices in the
same area, as well as a useless duplicate PG_ARGISNULL() check. There's
still quite a bit of code that uses the phrase "field name" in non-user-
visible ways, so I left those usages alone.
Such cases are disallowed by the SQL spec, and even if we wanted to allow
them, the semantics seem ambiguous: how should the FK columns be matched up
with the columns of a unique index? (The matching could be significant in
the presence of opclasses with different notions of equality, so this issue
isn't just academic.) However, our code did not previously reject such
cases, but instead would either fail to match to any unique index, or
generate a bizarre opclass-lookup error because of sloppy thinking in the
index-matching code.
David Rowley
This allows us to specify the maximum time to issue fsync to ensure
the received WAL file is safely flushed to disk. Without this,
pg_receivexlog always flushes WAL file only when it's closed and
which can cause WAL data to be lost at the event of a crash.
Furuya Osamu, heavily modified by me.
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
Based on the old comment, it took me a while to figure out what the
problem was. The importnat detail is that SSL_read() can return WANT_READ
even though some raw data was received from the socket.
This could be useful for datatypes like text, where we might want
to optimize for some collations but not others. However, this patch
doesn't introduce any new sortsupport functions that work this way;
it merely revises the code so that future patches may do so.
Patch by me. Review by Peter Geoghegan.
Previously the source codes for processing the received data and handling
the end of stream were included in pg_receivexlog main loop. This commit
splits out them as separate functions. This is useful for improving the
readability of main loop code and making the future pg_receivexlog-related
patch simpler.
When more than one setting entries of same parameter exist in the
configuration file, PostgreSQL uses only entry appearing last in
configuration file scan. Since the other entries are not used,
ParseConfigFp() doesn't need to process them, but previously it did
that. This problematic behavior caused the configuration file scan
to detect invalid settings of unused entries (e.g., existence of
multiple entries of PGC_POSTMASTER parameter) and log the messages
complaining about them.
This commit changes the configuration file scan so that it processes
only last entry of each parameter.
Note that when multiple entries of same parameter exist both in
postgresql.conf and postgresql.auto.conf, unused entries in
postgresql.conf are still processed only at postmaster startup.
The problem has existed since old version, but a user is more likely
to encounter it since 9.4 where ALTER SYSTEM command was introduced.
So back-patch to 9.4.
Amit Kapila, slightly modified by me. Per report from Christoph Berg.
In 9.2, pg_receivexlog with verbose option has emitted the messages
at the end of each WAL file. But the commit 0b63291 suppressed such
messages by mistake. This commit fixes the bug so that pg_receivexlog
--verbose outputs such messages again.
Back-patch to 9.3 where the bug was added.
log_newpage is used by many indexams, in addition to heap, but for
historical reasons it's always been part of the heapam rmgr. Starting with
9.3, we have another WAL record type for logging an image of a page,
XLOG_FPI. Simplify things by moving log_newpage and log_newpage_buffer to
xlog.c, and switch to using the XLOG_FPI record type.
Bump the WAL version number because the code to replay the old HEAP_NEWPAGE
records is removed.
When autovacuum is nominally off, we will still launch autovac workers
to vacuum tables that are at risk of XID wraparound. But after we'd done
that, an autovac worker would proceed to autovacuum every table in the
targeted database, if they meet the usual thresholds for autovacuuming.
This is at best pretty unexpected; at worst it delays response to the
wraparound threat. Fix it so that if autovacuum is nominally off, we
*only* do forced vacuums and not any other work.
Per gripe from Andrey Zhidenkov. This has been like this all along,
so back-patch to all supported branches.
InitProcess() relies on IsBackgroundWorker to decide whether the PGPROC
for a new backend should be taken from ProcGlobal's freeProcs or from
bgworkerFreeProcs. In EXEC_BACKEND builds, InitProcess() is called
sooner than in non-EXEC_BACKEND builds, and IsBackgroundWorker wasn't
getting initialized soon enough.
Report by Noah Misch. Diagnosis and fix by me.
Simon Riggs
Heikki Linnakangas
Robert Haas
Peter Eisentraut
Alvaro Herrera
Tom Lane
Andres Freund
Andrew Dunstan
Noah Misch
Fujii Masao
Stephen Frost
Kevin Grittner
Bruce Momjian
Michael Meskes
Jeff Davis
Greg Stark