Check in CREATE DATABASE and initdb that the selected encoding is
supported by ICU. Before, they would pass but users would later get
an error from the server when they tried to use the database.
Also document that initdb sets the encoding to UTF8 by default if the
ICU locale provider is chosen.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/6dd6db0984d86a51b7255ba79f111971@postgrespro.ru
There was a excessive structure, leading to somewhat disorganized
presentation of the information. Remove a few tags and reorder
paragraphs to make the text flow more easily. Also, reword some of it
to be more concise.
The bit about column list combination is not modified, other than to
remove an uninteresting (and IMO confusing and wrong) paragraph; I
intend to deal with it differently afterwards.
Backpatch to 15.
Discussion: https://postgr.es/m/20220913121138.yn7ekkfysxzhkm2u@alvherre.pgsql
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
Locale options can be specified for initdb, createdb, and CREATE
DATABASE. In initdb, it has always been possible to specify --locale
and then some --lc-* option to override a category. CREATE DATABASE
and createdb didn't allow that, requiring either the all-categories
option or only per-category options. In
f2553d4306, this was changed in CREATE
DATABASE (perhaps by accident?) to be more like the initdb behavior,
but createdb still had the old behavior.
Now we change createdb to match the behavior of CREATE DATABASE and
initdb, and also update the documentation of CREATE DATABASE to match
the new behavior, which was not done in the above commit.
Author: Marina Polyakova <m.polyakova@postgrespro.ru>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/7c99c132dc9c0ac630e0127f032ac480@postgrespro.ru
pg_walinspect uses datatype double (double precision floating point
number) for WAL stats percentile calculations and expose them via
float4 (single precision floating point number), which an unnecessary
loss of precision and confusing. Even though, it's harmless that way,
let's use float8 (double precision floating-point number) to be in
sync with what pg_walinspect does internally and what it exposes to
the users. This seems to be the pattern used elsewhere in the code.
Reported-by: Peter Eisentraut
Author: Bharath Rupireddy
Reviewed-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/36ee692b-232f-0484-ce94-dc39d82021ad%40enterprisedb.com
Be more clear about when and how an extension-defined GUC comes to be
visible in pg_settings. (Move the para to the bottom of the page, too;
whoever thought this point was more important than the para about the
view being updatable had odd priorities IMNSHO.)
Back-patch to v15 where archive modules were added, since that seems
to have made this more of a sore spot than it was before.
Benoit Lobréau, Nathan Bossart
Discussion: https://postgr.es/m/CAPE8EZ7KHaXMHKwT=HOim23tDVKYA1PruRuTfeYdCrYWwPGhag@mail.gmail.com
Remove no-longer-accurate claim that Windows lacks home directories.
Clarify the text by more clearly distinguishing which statements
reflect hard-wired choices versus which ones reflect overridable
defaults. Update the examples of version-specific file names,
and make them track future version changes by using "&majorversion;"
and "&version;". (BTW, in devel and beta releases this method
correctly says that you can use strings like "16devel" and "15beta4"
as minor version identifiers.)
Back-patch to v15, but not further, with the thought that in older
releases the examples with three-part version numbers still had
some historical relevance. v15 will be the first major release after
the last 9.x branch went out of support.
Robert Treat and Tom Lane, reviewed by Julien Rouhaud
Discussion: https://postgr.es/m/CAJSLCQ07F-WCYYYOY8+dWhHcVeJ1Pb01cWc-c0Hu=M3EjKT2Eg@mail.gmail.com
When using the BSD UUID functions, contrib/uuid-ossp expects
uuid_create() to produce a version-1 UUID. FreeBSD still does so,
but in recent NetBSD releases that function produces a version-4
(random) UUID instead. That's not acceptable for our purposes:
if the user wanted v4 she would have asked for v4, not v1.
Hence, check the version digit and complain if it's not '1'.
Also drop the documentation's claim that the NetBSD implementation
is usable. It might be, depending on which OS version you're using,
but we're not going to get into that kind of detail.
(Maybe someday we should ditch all these external libraries
and just write our own UUID code, but today is not that day.)
Nazir Bilal Yavuz, with cosmetic adjustments and docs by me.
Backpatch to all supported versions.
Discussion: https://postgr.es/m/3848059.1661038772@sss.pgh.pa.us
Discussion: https://postgr.es/m/17358-89806e7420797025@postgresql.org
In commit 3d895bc846 I introduced a bogus semicolon mid-statement by
careless cut-n-paste; move it. This had already been reported by Justin
Pryzby.
Also, change the styling a bit by avoiding names in CamelCase. This is
more consistent with the style we use elsewhere.
Backpatch to 15.
Author: Vitaly Burovoy <vitaly.burovoy@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/9afe5766-5a61-7860-598c-136867fad065@gmail.com
Discussion: https://postgr.es/m/20220819133016.GV26426@telsasoft.com
Add a new logical replication section for "Column Lists" (analogous to the
Row Filters page). This explains how the feature can be used and the
caveats in it.
Author: Peter Smith
Reviewed-by: Shi yu, Vignesh C, Erik Rijkers, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PvOuc9=_4TbASc5=VUqh16UWtFO3GzcKQK_5m1hrW3vqg@mail.gmail.com
Improve documentation regarding the limitations of unique and primary key
constraints on partitioned tables. The existing documentation didn't make
it clear that the constraint columns had to be present in the partition
key as bare columns. The reader could be led to believe that it was ok to
include the constraint columns as part of a function call's parameters or
as part of an expression. Additionally, the documentation didn't mention
anything about the fact that we disallow unique and primary key
constraints if the partition keys contain *any* function calls or
expressions, regardless of if the constraint columns appear as columns
elsewhere in the partition key.
The confusion here was highlighted by a report on the general mailing list
by James Vanns.
Discussion: https://postgr.es/m/CAH7vdhNF0EdYZz3GLpgE3RSJLwWLhEk7A_fiKS9dPBT3Dz_3eA@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvoU-u9iTqKjteYRFfi+UNEk7dbSAcyxEQD==vZt9B1KnA@mail.gmail.com
Reviewed-by: Erik Rijkers
Backpatch-through: 11
It was not strictly correct to say that a column list must always include
replica identity columns because that is true for only updates and
deletes.
Author: Peter Smith
Reviwed-by: Vignesh C, Amit Kapila
Backpatch-through: 15, where it was introduced
Discussion: https://postgr.es/m/CAHut+PvOuc9=_4TbASc5=VUqh16UWtFO3GzcKQK_5m1hrW3vqg@mail.gmail.com
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
On fast machines, it's possible for applications such as pgbench
to issue connection requests so quickly that the postmaster's
listen queue overflows in the kernel, resulting in unexpected
failures (with not-very-helpful error messages). Most modern OSes
allow the queue size to be increased, so document how to do that.
Per report from Kevin McKibbin.
Discussion: https://postgr.es/m/CADc_NKg2d+oZY9mg4DdQdoUcGzN2kOYXBu-3--RW_hEe0tUV=g@mail.gmail.com
sysctl is more portable than Linux's /proc/sys file tree, and
often easier to use too. That's why most of our docs refer to
sysctl when talking about how to adjust kernel parameters.
Bring the few stragglers into line.
Discussion: https://postgr.es/m/361175.1661187463@sss.pgh.pa.us
This commit adds or fixes used markups in a couple of places in the docs
(for <command>, <systemitem> and <literal>). While on it, clarify some
of the documentation added recently for archiving modules with
archive_command, that would still be used as default choice if no
external module is defined (though an archive module could as well use
an archive_command).
Author: Maxim Yablokov
Discussion: https://postgr.es/m/b47ec4e8-6f6a-2aba-038e-d5db150b245e@postgrespro.ru
Backpatch-through: 15
The table column that stores this is of type oid, but is actually limited
to uint16 and has a different path for creating new values. Some of
the documentation already referred to it as an ID, so let's standardize
on that.
While at it, most format strings already use %u, so for consintency
change the remaining stragglers using %d.
Per suggestions from Tom Lane and Justin Pryzby
Discussion: https://www.postgresql.org/message-id/3437166.1659620465%40sss.pgh.pa.us
Backpatch to v15
This event can happen when using SET ACCESS METHOD, as the data files of
the materialized need a full refresh but this command tag was not
updated to reflect that. The documentation is updated to track this
behavior.
Author: Onder Kalaci
Discussion: https://postgr.es/m/CACawEhXwHN3X34FiwoYG8vXR-oyUdrp7qcfRWSzS+NPahS5gSw@mail.gmail.com
Backpatch-through: 15
The messages were using 'two-phase transaction' at some places and
'prepared transaction' at other places. Make them consistently use
'prepared transaction'.
Reported-by: Ekaterina Kiryanova
Author: Peter Smith
Reviewed by: Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/745414e7-efb2-a6ae-5b83-fcbdf35aabc8@postgrespro.ru
Previously, if an extension script did CREATE OR REPLACE and there was
an existing object not belonging to the extension, it would overwrite
the object and adopt it into the extension. This is problematic, first
because the overwrite is probably unintentional, and second because we
didn't change the object's ownership. Thus a hostile user could create
an object in advance of an expected CREATE EXTENSION command, and would
then have ownership rights on an extension object, which could be
modified for trojan-horse-type attacks.
Hence, forbid CREATE OR REPLACE of an existing object unless it already
belongs to the extension. (Note that we've always forbidden replacing
an object that belongs to some other extension; only the behavior for
previously-free-standing objects changes here.)
For the same reason, also fail CREATE IF NOT EXISTS when there is
an existing object that doesn't belong to the extension.
Our thanks to Sven Klemm for reporting this problem.
Security: CVE-2022-2625
Previously, a byte with the high bit set was just transmitted
as-is by charin() and charout(). This is problematic if the
database encoding is multibyte, because the result of charout()
won't be validly encoded, which breaks various stuff that
expects all text strings to be validly encoded. We've
previously decided to enforce encoding validity rather than try
to individually harden each place that might have a problem with
such strings, so it's time to do something about "char".
To fix, represent high-bit-set characters as \ooo (backslash
and three octal digits), following the ancient "escape" format
for bytea. charin() will continue to accept the old way as well,
though that is only reachable in single-byte encodings.
Add some test cases just so there is coverage for this code.
We'll otherwise leave this question undocumented as it was before,
because we don't really want to encourage end-user use of "char".
For the moment, back-patch into v15 so that this change appears
in 15beta3. If there's not great pushback we should consider
absorbing this change into the older branches.
Discussion: https://postgr.es/m/2318797.1638558730@sss.pgh.pa.us
... when it applies to partitioned relations. This is almost the
opposite of 0c06534bd6, which removed references to "partition" in
favour of "child".
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/20220525013248.GO19626@telsasoft.com
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
We didn't explicitly say that random() uses a randomly-chosen seed
if you haven't called setseed(). Do so.
Also, remove ref/set.sgml's no-longer-accurate (and never very
relevant) statement that the seed value is multiplied by 2^31-1.
Back-patch to v12 where set.sgml's claim stopped being true.
The claim that we use a source of random bits as seed was debatable
before 4203842a1, too, so v12 seems like a good place to stop.
Per question from Carl Sopchak.
Discussion: https://postgr.es/m/f37bb937-9d99-08f0-4de7-80c91a3cfc2e@sopchak.me
We've long held the minimum at 3.80, but that's required more than
one workaround. Commit 0f39b70a6 broke it again, because it turns
out that exporting a target-specific variable didn't work in 3.80.
Considering that 3.81 is now old enough to get a driver's license,
and that the only remaining buildfarm member testing 3.80 (prairiedog)
is likely to be retired soon, let's just stop supporting 3.80.
Adjust docs and Makefile.global's minimum-version check to match.
There are a couple of comments in the Makefiles suggesting that
random things could be done differently after we desupport 3.80,
but I couldn't get excited about changing any of them right now.
Back-patch to v15, as 0f39b70a6 was.
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
POSIX shm_open() can sleep for a long time and fail spuriously because
of contention on an internal lock file on Solaris (and presumably
illumos). Commit 389869af fixed the main problem with this, namely that
we could crash, but it's now clear that "posix" is not a good default.
Therefore, choose "sysv" at initdb time on Solaris and illumos. Other
choices are still available by editing the postgresql.conf file.
Back-patch only to 15, because contention is much less likely further
back, and it doesn't seem like a good idea to change this in released
branches. This should clear up the failures on build farm animal
margay.
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
We have had a working and tunable autovacuum
for at least a decade now, so remove the recommendation to
manually vacuum tables at least every night.
Autovacuum is now also triggered by INSERTs, so we can also
remove the recommendation to run VACUUM (ANALYZE) after lots
of INSERTs or DELETEs.
Instead, suggest using autovacuum by moving the respective
paragraph up to where the importance of VACUUM is emphasized.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-By: Magnus Hagander, Peter Geoghegan
Discussion: https://postgr.es/m/6f5e3da98fec14640f389d7b84c3b413833697f4.camel@cybertec.at
This patch documents that the initial data synchronization (tablesync) for
logical replication does not take into account the publication 'publish'
parameter when copying the existing table data.
Author: Peter Smith
Reviewed-by: Shi yu, Euler Taveira, Robert Haas, Amit Kapila
Discussion: https://postgr.es/m/CAHut+PtbfALjFpS2MkrvQ+wWQKByP7CNh9RtFta-r=BHEU3S3w@mail.gmail.com
072132f0 used the attnum offset to access the raw_fields array when
checking that the attribute names of the header and of the relation
match, leading to incorrect results or even crashes if the attribute
numbers of a relation are changed, like on a dropped attribute. This
fixes the logic to use the correct attribute names for the header
matching requirements.
Also, this commit disallows HEADER MATCH in COPY TO as there is no
validation that can be done in this case.
The tests are expanded for HEADER MATCH with COPY FROM and dropped
columns, with cases where a relation has a dropped and re-added column,
as well as a reduced set of columns.
Author: Julien Rouhaud
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/20220607154744.vvmitnqhyxrne5ms@jrouhaud
Three parameters have been using "int" rather than "integer" to describe
their type:
auth_delay.milliseconds
max_logical_replication_workers
pg_prewarm.autoprewarm_interval
This is inconsistent with any other integer GUCs listed in the docs
(148, as far as I can see).
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv6X5T-veN2abUDUvBxZm+SSm-9otfi3LZPGyOc6u6hiA@mail.gmail.com
This reverts commits 5753d4ee32 and fe60b67250 that modified HOT to
ignore BRIN indexes. The commit message for 5753d4ee32 claims that:
When determining whether an index update may be skipped by using
HOT, we can ignore attributes indexed only by BRIN indexes. There
are no index pointers to individual tuples in BRIN, and the page
range summary will be updated anyway as it relies on visibility
info.
This is partially incorrect - it's true BRIN indexes don't point to
individual tuples, so HOT chains are not an issue, but the visibitlity
info is not sufficient to keep the index up to date. This can easily
result in corrupted indexes, as demonstrated in the hackers thread.
This does not mean relaxing the HOT restrictions for BRIN is a lost
cause, but it needs to handle the two aspects (allowing HOT chains and
updating the page range summaries) as separate. But that requires a
major changes, and it's too late for that in the current dev cycle.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/05ebcb44-f383-86e3-4f31-0a97a55634cf@enterprisedb.com
In addition, this moves the new paragraph in the MVCC page upwards, for
a more consistent flow; some minor markup mistakes, style issues and
typos are fixed too.
Per comments from Justin Pryzby.
Discussion: https://postgr.es/m/20220511163350.GL19626@telsasoft.com
This commit, in completion of 157f873, forces a ROLLBACK for
--single-transaction only when ON_ERROR_STOP is used when one of the
steps defined by -f/-c fails. Hence, COMMIT is always used when
ON_ERROR_STOP is not set, ignoring the status code of the last action
taken in the set of switches specified by -c/-f (previously ROLLBACK
would have been issued even without ON_ERROR_STOP if the last step
failed, while COMMIT was issued if a step in-between failed as long as
the last step succeeded, leading to more inconsistency).
While on it, this adds much more test coverage in this area when not
using ON_ERROR_STOP with multiple switch patterns involving -c and -f
for query files, single queries and slash commands.
The behavior of ON_ERROR_STOP is arguably a bug, but there was no much
support for a backpatch to force a ROLLBACK on a step failure, so this
change is done only on HEAD for now.
Per discussion with Tom Lane and Kyotaro Horiguchi.
Discussion: https://postgr.es/m/Yqbc8bAdwnP02na4@paquier.xyz
The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading. The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.
Per complaint from Jian He.
Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com
The patch introducing jsonpath dropped a para about that between
two related examples, and didn't bother updating the introductory
sentences that it falsified. The grammar was pretty shaky as well.
38bfae3 has moved the contents written to files by pg_upgrade under a
new directory called pg_upgrade_output.d/ located in the new cluster's
data folder, and it used a simple structure made of two subdirectories
leading to a fixed structure: log/ and dump/. This design has made
weaker pg_upgrade on repeated calls, as we could get failures when
creating one or more of those directories, while potentially losing the
logs of a previous run (logs are retained automatically on failure, and
cleaned up on success unless --retain is specified). So a user would
need to clean up pg_upgrade_output.d/ as an extra step for any repeated
calls of pg_upgrade. The most common scenario here is --check followed
by the actual upgrade, but one could see a failure when specifying an
incorrect input argument value. Removing entirely the logs would have
the disadvantage of removing all the past information, even if --retain
was specified at some past step.
This result is annoying for a lot of users and automated upgrade flows.
So, rather than requiring a manual removal of pg_upgrade_output.d/, this
redesigns the set of output directories in a more dynamic way, based on
a suggestion from Tom Lane and Daniel Gustafsson. pg_upgrade_output.d/
is still the base path, but a second directory level is added, mostly
named after an ISO-8601-formatted timestamp (in short human-readable,
with milliseconds appended to the name to avoid any conflicts). The
logs and dumps are saved within the same subdirectories as previously,
as of log/ and dump/, but these are located inside the subdirectory
named after the timestamp.
The logs of a given run are removed only after a successful run if
--retain is not used, and pg_upgrade_output.d/ is kept if there are any
logs from a previous run. Note that previously, pg_upgrade would have
kept the logs even after a successful --check but that was inconsistent
compared to the case without --check when using --retain. The code in
charge of the removal of the output directories is now refactored into a
single routine.
Two TAP tests are added with some --check commands (one failure case and
one success case), to look after the issue fixed here. Note that the
tests had to be tweaked a bit to fit with the new directory structure so
as it can find any logs generated on failure. This is still going to
require a change in the buildfarm client for the case where pg_upgrade
is tested without the TAP test, though, but I'll tackle that with a
separate patch where needed.
Reported-by: Tushar Ahuja
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Justin Pryzby
Discussion: https://postgr.es/m/77e6ecaa-2785-97aa-f229-4b6e047cbd2b@enterprisedb.com
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
The previous entry invited confusion between what uniq() does
by itself and what it does when combined with sort(). The latter
usage is pretty useful so we should show it, but add an additional
example to clarify the results of uniq() alone.
Per suggestion from Martin Kalcher. Back-patch to v13, where
we switched to formatting that supports multiple examples.
Discussion: https://postgr.es/m/165407884456.573551.8779012279828726162@wrigleys.postgresql.org
Currently, we simply combine the column lists when publishing tables on
multiple publications and that can sometimes lead to unexpected behavior.
Say, if a column is published in any row-filtered publication, then the
values for that column are sent to the subscriber even for rows that don't
match the row filter, as long as the row matches the row filter for any
other publication, even if that other publication doesn't include the
column.
The main purpose of introducing a column list is to have statically
different shapes on publisher and subscriber or hide sensitive column
data. In both cases, it doesn't seem to make sense to combine column
lists.
So, we disallow the cases where the column list is different for the same
table when combining publications. It can be later extended to combine the
column lists for selective cases where required.
Reported-by: Alvaro Herrera
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
The example given for anyelement <@ anymultirange didn't return
true as claimed; adjust it so it does.
In passing, change a couple of sample results where the modern
numeric-based logic produces a different number of trailing zeroes
than before.
Erik Rijkers
Discussion: https://postgr.es/m/cc35735d-1ec1-5bb3-9e27-cddbab7afa23@xs4all.nl
The PostgreSQL limitations section of the documents mentioned the limit
on the number of columns that can exist in a table. Users might be
surprised to find that there's also a limit on the number of columns that
can exist in a targetlist. Users may experience restrictions which
surprise them if they happened to select a large number of columns from
several tables with many columns. Here we document that there is a
limitation on this and mention what that limit actually is.
Wording proposal by Alvaro Herrera
Reported-by: Vladimir Sitnikov
Author: Dave Crammer
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAB=Je-E18aTYpNqje4mT0iEADpeGLSzwUvo3H9kRRuDdsNo4aQ@mail.gmail.com
Backpatch-through: 12, where the limitations section was added
This reverts commit d9d076222f "VACUUM: ignore indexing operations
with CONCURRENTLY".
These changes caused indexes created with the CONCURRENTLY option to
miss heap tuples that were HOT-updated and HOT-pruned during the index
creation. Before these changes, HOT pruning would have been prevented
by the Xmin of the transaction creating the index, but because this
change was precisely to allow the Xmin to move forward ignoring that
backend, now other backends scanning the table can prune them. This is
not a problem for VACUUM (which requires a lock that conflicts with a
CREATE INDEX CONCURRENTLY operation), but HOT-prune can definitely
occur. In other words, Xmin advancement was sped up, but at the cost of
corrupting the resulting index.
Regrettably, this means that the new feature in PG14 that RIC/CIC on
very large tables no longer force VACUUM to retain very old tuples goes
away. We might try to implement it again in a later release, but for
now the risk of indexes missing tuples is too high and there's no easy
fix.
Backpatch to 14, where this change appeared.
Reported-by: Peter Slavov <pet.slavov@gmail.com>
Diagnosys-by: Andrey Borodin <x4mmm@yandex-team.ru>
Diagnosys-by: Michael Paquier <michael@paquier.xyz>
Diagnosys-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/17485-396609c6925b982d%40postgresql.org
runtime.sgml contains a passing reference to the minimum server
version that pg_dump[all] can dump from. That was 7.0 for many
years, but when 64f3524e2 raised it to 8.0, we missed updating this
bit. Then when 30e7c175b raised it to 9.2, we missed it again.
Given that track record, I'm not too hopeful that we'll remember
to fix this in future changes ... but for now, make the docs match
reality in each branch.
Noted by Daniel Westermann.
Discussion: https://postgr.es/m/GV0P278MB041917EB3E2FE8704B5AE2C6D2DC9@GV0P278MB0419.CHEP278.PROD.OUTLOOK.COM
The information generated when track_activities is accessible to
superusers, roles with the privileges of pg_read_all_stats, as well as
roles one has the privileges of. The original text did not outline the
last point, while the change done in ac1ae47 was unclear about the
second point.
Per discussion with Nathan Bossart.
Discussion: https://postgr.es/m/20220521185743.GA886636@nathanxps13
Backpatch-through: 10
The form taking anymultirange had not been documented. This was
fixed in HEAD in b21c4cf95, but that should have been back-patched
to v14 since the function was added there. Do so now.
Also, the form taking anyrange was incorrectly documented as
returning anymultirange, when it returns anyrange.
Remove b21c4cf95 from the v15 release notes, since it no longer
qualifies as new-in-v15.
Noted by Shay Rojansky.
Discussion: https://postgr.es/m/CADT4RqAktzP7t6SFf0Xqm9YhahzvsmxFbzXe-gFOd=+_CHm0JA@mail.gmail.com
Foreign tables can be partitioned, but previous documentation commits
left the syntax synopsis both incomplete and incorrect.
Justin Pryzby and Amit Langote
Discussion: http://postgr.es/m/20220521130922.GX19626@telsasoft.com
The description of track_activities mentioned that it is visible to
superusers and that the information related to the current session can
be seen, without telling about pg_read_all_stats. Roles that are
granted the privileges of pg_read_all_stats can also see this
information, so mention it in the docs.
Author: Ian Barwick
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/CAB8KJ=jhPyYFu-A5r-ZGP+Ax715mUKsMxAGcEQ9Cx_mBAmrPow@mail.gmail.com
Backpatch-through: 10
It wasn't previously mentioned that the index is created as invalid,
which is confusing to new users.
Backpatch to 14 (only because of a conflict in 13).
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reported-by: Lauren Fliksteen <dancernerd32@gmail.com>
Reviewed-by: Rajakavitha Kodhandapani <krajakavitha@gmail.com>
Discussion: https://postgr.es/m/165290238488.670.7500177735573254738@wrigleys.postgresql.org
The documentation didn't specify the name of the per-user service file
on Windows, and extrapolating from the pattern used for other config
files gave the wrong answer. The fact that it isn't consistent with the
others sure seems like a bug, but it's far too late to change that now;
we'd just penalize people who worked it out in the past. So, simply
document the true state of affairs.
In passing, fix some gratuitous differences between the discussions
of the service file and the password file.
Julien Rouhaud, per question from Dominique Devienne.
Backpatch to all supported branches. I (tgl) also chose to back-patch
the part of commit ba356a397 that touched libpq.sgml's description of
the service file --- in hindsight, I'm not sure why I didn't do so at
the time, as it includes some fairly essential information.
Discussion: https://postgr.es/m/CAFCRh-_mdLrh8eYVzhRzu4c8bAFEBn=rwoHOmFJcQOTsCy5nig@mail.gmail.com
Commit 923def9a53 and 52e4f0cd47 allowed to specify column lists and row
filters for publication tables. This commit extends the
pg_publication_tables view and pg_get_publication_tables function to
display that information.
This information will be useful to users and we also need this for the
later commit that prohibits combining multiple publications with different
column lists for the same table.
Author: Hou Zhijie
Reviewed By: Amit Kapila, Alvaro Herrera, Shi Yu, Takamichi Osumi
Discussion: https://postgr.es/m/202204251548.mudq7jbqnh7r@alvherre.pgsql
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
It wasn't very clear that if this option was enabled, postgres_fdw would
commit remote transactions in parallel at main-transaction end, and
commit remote subtransactions in parallel at subtransaction end, due to
the references to (sub)transaction and other too specific documentation.
Clarify that. Also reword to simplify.
Follow-up for commit 04e706d42.
Jonathan S. Katz, reviewed by Justin Pryzby, with some modifications by
me.
Discussion: https://postgr.es/m/1435bfd1-172b-de38-f590-4404a5a62eb0%40postgresql.org
The code for unloading a library has been commented-out for over 12
years, ever since commit 602a9ef5a7, and we're
no closer to supporting it now than we were back then.
Nathan Bossart, reviewed by Michael Paquier and by me.
Discussion: http://postgr.es/m/Ynsc9bRL1caUSBSE@paquier.xyz
Presently, the server may emit a variety of log messages when inspecting
a runtime-computed GUC, mostly in the shape of one LOG message with the
default configuration, related to the startup sequence launched as such
GUCs require a load of the control file and of external shared
libraries.
For example, the server will always emit a "database system is shut
down" LOG (unless the user has set log_min_messages higher than LOG),
which is an annoying behavior as "postgres -C" is expected to only emit
in its output the parameter value we are looking for. The parameter
value is sent to stdout, while the logs are sent to stderr so we could
recommend to use a redirection, but there was not much love for this
workaround either.
To avoid such extra log messages, per discussion, this change sets
log_min_messages to FATAL internally when -C is used on a
runtime-computed GUC (even if set to PANIC in postgresql.conf). At
FATAL, the user will still receive messages explaining why a GUC value
cannot be inspected, and will know if the command is attempted on a
server already running, something not supported yet for a
runtime-computed GUC.
Reported-by: Magnus Hagander, Bruce Momjian
Author: Nathan Bossart, Michael Paquier
Discussion: https://postgr.es/m/Yni6ZHkGotUU+RSf@paquier.xyz
Several keywords were missing or misclassified in the original
SQL:2016 standard. This has been corrected in later technical
corrigenda. This change updates the PostgreSQL documentation
accordingly.
This also fixes a mistake in 606948b058: The keywords JSON_SCALAR and
JSON_SERIALIZE added there are not from SQL:2016 but from future
SQL:202x, so they don't belong in that list yet.
(606948b058 also added JSON to the reserved list, which is what the
corrigendum also does, but failed to remove it from the nonreserved
list.)
Commit aa0105141 assigned fixed OIDs to template0 and postgres
in a very ad-hoc way. Notably, instead of teaching Catalog.pm
about these OIDs, the unused_oids script was just hacked to
not show them as unused. That's problematic since, for example,
duplicate_oids wouldn't report any future conflict. Hence,
invent a macro DECLARE_OID_DEFINING_MACRO() that can be used to
define an OID that is known to Catalog.pm and will participate
in duplicate-detection as well as renumbering by renumber_oids.pl.
(We don't anticipate renumbering these particular OIDs, but we
might as well build out all the Catalog.pm infrastructure while
we're here.)
Another issue is that aa0105141 neglected to touch IsPinnedObject,
with the result that it now claimed template0 and postgres are
pinned. The right thing to do there seems to be to teach it that
no database is pinned, since in fact DROP DATABASE doesn't check
for pinned-ness (and at least for these cases, that is an
intentional choice). It's not clear whether this wrong answer
had any visible effect, but perhaps it could have resulted in
erroneous management of dependency entries.
In passing, rename the TemplateDbOid macro to Template1DbOid
to reduce confusion (likely we should have done that way back
when we invented template0, but we didn't), and rename the
OID macros for template0 and postgres to have a similar style.
There are no changes to postgres.bki here, so no need for a
catversion bump.
Discussion: https://postgr.es/m/2935358.1650479692@sss.pgh.pa.us
Some places used ZSTD, which isn't widely used anywhere. Use ZSTD only
to refer to the environment variable; use zstd (all lowercase) to refer
to the utility.
Per complaint from Justin Pryzby.
Discussion: https://postgr.es/m/20220414003301.GT26620@telsasoft.com
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
Historically we've been lax about this, but seeing that we're not
lax in C files, there doesn't seem to be a good reason to be so
in the documentation. Remove the existing occurrences (mostly
though not entirely in copied-n-pasted psql output), and modify
.gitattributes so that "git diff --check" will warn about future
cases.
While at it, add *.pm to the set of extensions .gitattributes
knows about, and remove some obsolete entries for files that
we don't have in the tree anymore.
Per followup discussion of commit 5a892c9b1.
Discussion: https://postgr.es/m/E1nfcV1-000kOR-E5@gemulon.postgresql.org
Similarly to what was done in 04539e73f, we standardized on SQL being
pronounced "es-que-ell" rather than "sequel" in our documentation.
Two inconsistencies have crept in during the v15 cycle. The others
existed before but were missed in 04539e73f due to none of the searches
accounting for "SQL" being wrapped in tags.
As with 04539e73f, we don't touch code comments here in order to not
create unnecessary back-patching pain.
Discussion: https://postgr.es/m/CAApHDvpML27UqFXnrYO1MJddsKVMQoiZisPvsAGhKE_tsKXquw%40mail.gmail.com
Remove meaningless "failures" column from the aggregate logging. It
was just a sum of "serialization failures" and "deadlock failures".
Pointed out by Tom Lane. Patch reviewed by Fabien COELHO.
Discussion: https://postgr.es/m/4183048.1649536705%40sss.pgh.pa.us
Commit 52e4f0cd47 added a feature to allow specifying row filters for
logical replication of tables. This patch adds detailed documentation on
that feature including examples to make it easier for users to understand.
Author: Peter Smith, Euler Taveira
Reviewed By: Greg Nancarrow, Aleksander Alekseev, Amit Kapila, Ajin Cherian, Alvaro Herrera
Discussion: https://postgr.es/m/CAHut+PtnsBr59=_NvxXp_=S-em0WxyuDOQmSTuHGb4sVhkHffg@mail.gmail.com
It was missing lock levels FOR KEY SHARE and FOR NO KEY EXCLUSIVE; but
also SELECT FOR UPDATE is not a command separate from SELECT, as the
original text implied. It is clearer to state that FOR <lock strength>
is an option of regular SELECT.
Per suggestion from Joey Bodoia <jbodoia21@cmc.edu>
Reviewed-by: Joey Bodoia <jbodoia21@cmc.edu> (offlist)
Reviewed-by: Erikjan Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/164908765512.682.17348032020747341013@wrigleys.postgresql.org
All except one of these are new to v15. Only one of the wordsmithing
changes appears in older versions. The wordsmithing improvement does not
seem significant enough to warrant backpatching.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
It's more accurate to say that the query identifier is not shown when
compute_query_id = regress rather than to say it is hidden.
This change (ebf6c5249) appeared in v14, so it makes sense to backpatch
this small adjustment to keep the documents consistent between v14 and
master.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 14, where compute_query_id = regress was added
This tries to bring a bit more consistency to the use of the <productname>
tag in the documents. This fixes a couple of mistakes with our own
product. We definitely should be consistently calling that PostgreSQL
when we're referring to the modern-day version of the software.
This also tidies up a couple of inconsistencies with the case of other
product names, namely Emacs and Python. We also get rid of some incorrect
usages of <productname> and replace them with <literal>.
Many of these mistakes exist in the back branches, but they don't quite
seem critical enough to warrant fixing them in prior versions at this
stage.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Since babbbb5 and the introduction of LZ4 in pg_receivewal, the
compression of the WAL archived is controlled by two options:
- --compression-method with "gzip", "none" or "lz4" as possible value.
- --compress=N to specify a compression level. This includes a
backward-incompatible change where a value of 0 leads to a failure
instead of no compression enforced.
This commit takes advantage of a4b5754 and 3603f7c to rework the
compression options of pg_receivewal, as of:
- The removal of --compression-method.
- The extenction of --compress to use the same grammar as pg_basebackup,
with a METHOD:DETAIL format, where a METHOD is "gzip", "none" or "lz4"
and a DETAIL is a comma-separated list of options, the only keyword
supported is now "level" to control the compression level. If only an
integer is specified as value of this option, "none" is implied on 0
and "gzip" is implied otherwise. This brings back --compress to be
backward-compatible with ~14, while still supporting LZ4.
This has also the advantage of centralizing the set of checks used by
pg_receivewal to validate its compression options.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Google seems to like to return textsearch.html for queries about
GIN and GiST indexes, even though it's not a primary reference
for either. It seems likely that that's because those keywords
appear in the page title. Since "GIN and GiST Index Types" is
not a very apposite title for this material anyway, rename the
section in hopes of stopping that.
Also provide explicit links to the GIN and GiST chapters, to help
anyone who finds their way to this page regardless.
Per gripe from Jan Piotrowski. Back-patch to supported branches.
(Unfortunately Google is likely to continue returning the 9.1
version of this page, but improving that situation is a matter
for the www team.)
Discussion: https://postgr.es/m/164978902252.1276550.9330175733459697101@wrigleys.postgresql.org
It's misleading to call the data directory the "synchronized data
directory" when discussing a crash scenario when using pg_rewind's
--no-sync option. Here we just remove the word "synchronized" to avoid
any possible confusion.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Backpatch-through: 12, where --no-sync was added
Commit 3804539e4 neglected to update the documentation's claim that
random() uses a "linear congruential algorithm". In hopes of avoiding
the same mistake if someone replaces our PRNG again, just say it's a
deterministic pseudo-random number generator and leave it at that.
Anybody who really wants to know can look in the source code.
COMPATIBILITY NOTE FOR RELEASE NOTES: 3804539e4's commit message
really should have mentioned that the random() sequence after
setseed(), while still repeatable, will differ from what you got
in pre-v15 releases.
Noted by Dagfinn Ilmari Mannsåker; wording suggestion by Dean Rasheed.
Discussion: https://postgr.es/m/875ynfpiru.fsf@wibble.ilmari.org
The table was in the wrong section and using an older type of link, as
reported by Sirisha, and also using an older table layout, as I noticed
while trying to figure out how and when it might have got out of sync.
Defect in commit 5dc0418f.
Author: sirisha chamarthi <sirichamarthi22@gmail.com>
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAKrAKeVk-LRHMdyT6x_p33eF6dCorM2jed5h_eHdRdv0reSYTA@mail.gmail.com
\dconfig without an argument originally printed all parameters,
but it seems more useful to print only those parameters with
non-default settings. You can easily get the show-everything
behavior with "\dconfig *", but that output is unwieldy and
seems unlikely to be wanted very often.
Per suggestion from Christoph Berg.
Discussion: https://postgr.es/m/YlFQLzlPi4QD0wSi@msg.df7cb.de
The documentation of REINDEX has never mentioned that the query planner
may take an ACCESS SHARE lock on the indexes depending on the query
used. This adds also a note about prepared queries not impacted when
they do not use the index(es) rebuilt.
Author: Frédéric Yhuel
Reviewed-by: Guillaume Lelarge, Justin Pryzby
Discussion: https://postgr.es/m/65d08718-6f11-978a-4b5a-72b807d4c663@dalibo.com