The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
Detection of WAL records having references to invalid pages
during recovery causes PostgreSQL to raise a PANIC-level error,
aborting the recovery. Setting ignore_invalid_pages to on causes
the system to ignore those WAL records (but still report a warning),
and continue recovery. This behavior may cause crashes, data loss,
propagate or hide corruption, or other serious problems.
However, it may allow you to get past the PANIC-level error,
to finish the recovery, and to cause the server to start up.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAHGQGwHCK6f77yeZD4MHOnN+PaTf6XiJfEB+Ce7SksSHjeAWtg@mail.gmail.com
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
Returning a non-NULL time is pointless, sinc a walsender is not a
process that would be running normal transactions anyway, but the code
was unintentionally exposing the process start time intermittently,
which was not only bogus but it also confused monitoring systems looking
for idle transactions. Fix by avoiding all updates in walsenders.
Backpatch to 11, where walsenders started appearing in pg_stat_activity.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/20191209234409.exe7osmyalwkt5j4@development
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
The previous coding imagined that it could call before_shmem_exit()
when a non-exclusive backup began and then remove the previously-added
handler by calling cancel_before_shmem_exit() when that backup
ended. However, this only works provided that nothing else in the
system has registered a before_shmem_exit() hook in the interim,
because cancel_before_shmem_exit() is documented to remove a callback
only if it is the latest callback registered. It also only works
if nothing can ERROR out between the time that sessionBackupState
is reset and the time that cancel_before_shmem_exit(), which doesn't
seem to be strictly true.
To fix, leave the handler installed for the lifetime of the session,
arrange to install it just once, and teach it to quietly do nothing if
there isn't a non-exclusive backup in process.
This is a bug, but for now I'm not going to back-patch, because the
consequences are minor. It's possible to cause a spurious warning
to be generated, but that doesn't really matter. It's also possible
to trigger an assertion failure, but production builds shouldn't
have assertions enabled.
Patch by me, reviewed by Kyotaro Horiguchi, Michael Paquier (who
preferred a different approach, but got outvoted), Fujii Masao,
and Tom Lane, and with comments by various others.
Discussion: http://postgr.es/m/CA+TgmobMjnyBfNhGTKQEDbqXYE3_rXWpc4CM63fhyerNCes3mA@mail.gmail.com
This changes the routines in charge of recycling WAL segments past the
last redo LSN to not use anymore "RedoRecPtr" as a local variable, which
is also available in the context of the session as a static declaration,
replacing it with "lastredoptr". This confusion has been introduced by
d9fadbf, so backpatch down to v11 like the other commit.
Thanks to Tom Lane, Robert Haas, Alvaro Herrera, Mark Dilger and Kyotaro
Horiguchi for the input provided.
Author: Ranier Vilela
Discussion: https://postgr.es/m/MN2PR18MB2927F7B5F690065E1194B258E35D0@MN2PR18MB2927.namprd18.prod.outlook.com
Backpatch-through: 11
This Assert thought that an overflowed transaction can never get registered
for the group update. But that is not true, because even when the number
of children for a transaction got reduced, the overflow flag is not
changed. And, for group update, we only care about the current number of
children for a transaction that is being committed.
Based on comments by Andres Freund, remove a redundant Assert in
TransactionIdSetPageStatus as we already had a static Assert for the same
condition a few lines earlier.
Reported-by: Vignesh C
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/CAFiTN-s5=uJw-Z6JC9gcqtBSjXsrHnU63PXBrA=pnBjqnkm5UA@mail.gmail.com
recoveryDelayUntilTime was introduced by commit 36da3cfb45 as a global
because its method of operation was devilishly intrincate. Commit
c945af80cf removed all that complexity and could have turned it into a
local variable, but didn't. Do so now.
Discussion: https://postgr.es/m/20191213200751.GA10731@alvherre.pgsql
Reviewed-by: Michaël Paquier, Daniel Gustafsson
Error messages referring to incorrect WAL segment names could have been
generated for a fsync() failure or when creating a new segment at the
end of recovery.
XLogFileNameP() is a wrapper routine able to build a palloc'd string for
a WAL segment name, which is used for error string generation. There
were several code paths where it gets called in a critical section,
where memory allocation is not allowed. This results in triggering
an assertion failure instead of generating the wanted error message.
Another, more annoying, problem is that if the allocation to generate
the WAL segment name fails on OOM, then the failure would be escalated
to a PANIC.
This removes the routine and all its callers are replaced with a logic
using a fixed-size buffer. This way, all the existing mistakes are
fixed and future ones are prevented.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CA+fd4k5gC9H4uoWMLg9K_QfNrnkkdEw+-AFveob9YX7z8JnKTA@mail.gmail.com
XLogReader, walsender and pg_waldump all had their own routines to read
data from WAL files to memory, with slightly different approaches
according to the particular conditions of each environment. There's a
lot of commonality, so we can refactor that into a single routine
WALRead in XLogReader, and move the differences to a separate (simpler)
callback that just opens the next WAL-segment. This results in a
clearer (ahem) code flow.
The error reporting needs are covered by filling in a new error-info
struct, WALReadError, and it's the caller's responsibility to act on it.
The backend has WALReadRaiseError() to do so.
We no longer ever need to seek in this interface; switch to using
pg_pread().
Author: Antonin Houska, with contributions from Álvaro Herrera
Reviewed-by: Michaël Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
If LISTEN is the only action in a serializable-mode transaction,
and the session was not previously listening, and the notify queue
is not empty, predicate.c reported an assertion failure. That
happened because we'd acquire the transaction's initial snapshot
during PreCommit_Notify, which was called *after* predicate.c
expects any such snapshot to have been established.
To fix, just swap the order of the PreCommit_Notify and
PreCommit_CheckForSerializationFailure calls during CommitTransaction.
This will imply holding the notify-insertion lock slightly longer,
but the difference could only be meaningful in serializable mode,
which is an expensive option anyway.
It appears that this is just an assertion failure, with no
consequences in non-assert builds. A snapshot used only to scan
the notify queue could not have been involved in any serialization
conflicts, so there would be nothing for
PreCommit_CheckForSerializationFailure to do except assign it a
prepareSeqNo and set the SXACT_FLAG_PREPARED flag. And given no
conflicts, neither of those omissions affect the behavior of
ReleasePredicateLocks. This admittedly once-over-lightly analysis
is backed up by the lack of field reports of trouble.
Per report from Mark Dilger. The bug is old, so back-patch to all
supported branches; but the new test case only goes back to 9.6,
for lack of adequate isolationtester infrastructure before that.
Discussion: https://postgr.es/m/3ac7f397-4d5f-be8e-f354-440020675694@gmail.com
Discussion: https://postgr.es/m/13881.1574557302@sss.pgh.pa.us
This commit changes xact_desc() so that it reports the detail information about
PREPARE TRANSACTION record, like GID (global transaction identifier),
timestamp at prepare transaction, delete-on-abort/commit relations,
XID of subtransactions, and invalidation messages. These are helpful
when diagnosing 2PC-related troubles.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andrey Lepikhov, Kyotaro Horiguchi, Julien Rouhaud, Alvaro Herrera
Discussion: https://postgr.es/m/CAHGQGwEvhASad4JJnCv=0dW2TJypZgW_Vpb-oZik2a3utCqcrA@mail.gmail.com
If the passed in xid is the current top transaction, we can do a fast
check and exit early. This should work well for the current heap but
also works very well for proposed AMs that don't use a separate xid
for subtransactions.
Author: Ashwin Agrawal, based on a suggestion from Andres Freund
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
If there is the WAL page that the continuation WAL record just fits within
(i.e., the continuation record ends just at the end of the page) and
the LSN in such page is specified with -s option, previously pg_waldump
caused an assertion failure. The cause of this assertion failure was that
XLogFindNextRecord() that pg_waldump -s calls mistakenly handled
such special WAL page.
This commit changes XLogFindNextRecord() so that it can handle
such WAL page correctly.
Back-patch to all supported versions.
Author: Andrey Lepikhov
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/99303554-5dd5-06e6-f943-b3005ccd6edd@postgrespro.ru
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
In v11 or before, those settings could not take effect in crash recovery
because they are specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
those settings to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
restore_command and recovery_end_command settings.
Back-patch to v12 where the issue was added.
Author: Fujii Masao
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit
2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
When using COMMIT AND CHAIN or ROLLBACK AND CHAIN not in an explicit
transaction block, the previous implementation would leave a
transaction block active in the ROLLBACK case but not the COMMIT case.
To fix for now, error out when using these commands not in an explicit
transaction block. This restriction could be lifted if a sensible
definition and implementation is found.
Bug: #15977
Author: fn ln <emuser20140816@gmail.com>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Previously even if postmaster died and WaitLatch() woke up with that event
while pg_promote() was waiting for the standby promotion to finish,
pg_promote() did nothing special and kept waiting until timeout occurred.
This could cause a busy loop.
This patch make pg_promote() return false immediately when postmaster
dies, to avoid such a busy loop.
Back-patch to v12 where pg_promote() was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEs9ROgSp+QF+YdDU+xP8W=CY1k-_Ov-d_Z3JY+to3eXA@mail.gmail.com
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
This function is only used by xlogreader.c itself, so there's no need to
export it. It was introduced by commit 3b02ea4f07 with the apparent
intention that it could be used externally, but I couldn't find any
external code calling it.
I (Álvaro) couldn't resist the urge to sort nearby function prototypes
properly while at it.
Author: Antonin Houska
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
In order to be able to work with FullTransactionId values during replay
without increasing the size of the WAL, infer the epoch. In general we
can't do that safely, but during replay we can because we know that
nextFullXid can't advance concurrently.
Prevent frontend code from seeing this new function, due to the above
restriction. Perhaps in future it will be possible to extract the value
entirely from independent WAL records, and then this restriction can be
lifted.
Author: Thomas Munro, based on earlier code from Andres Freund
Discussion: https://postgr.es/m/CA%2BhUKG%2BmLmuDjMi6o1dxkKvGRL56Y2Rz%2BiXAcrZV03G9ZuFQ8Q%40mail.gmail.com
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
Heikki Linnakangas
Fujii Masao
Amit Kapila
Alvaro Herrera
Bruce Momjian
Robert Haas
Michael Paquier
Tom Lane
Peter Eisentraut
Thomas Munro
Andres Freund