Specifying '-f' will add the 'force' option to the DROP DATABASE command
sent to the server. This will try to terminate all existing connections
to the target database before dropping it.
Author: Pavel Stehule
Reviewed-by: Vignesh C and Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
pg_upgrade needs to check whether certain non-upgradable data types
appear anywhere on-disk in the source cluster. It knew that it has
to check for these types being contained inside domains and composite
types; but it somehow overlooked that they could be contained in
arrays and ranges, too. Extend the existing recursive-containment
query to handle those cases.
We probably should have noticed this oversight while working on
commit 0ccfc2822 and follow-ups, but we failed to :-(. The whole
thing's possibly a bit overdesigned, since we don't really expect
that any of these types will appear on disk; but if we're going to
the effort of doing a recursive search then it's silly not to cover
all the possibilities.
While at it, refactor so that we have only one copy of the search
logic, not three-and-counting. Also, to keep the branches looking
more alike, back-patch the output wording change of commit 1634d3615.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/31473.1573412838@sss.pgh.pa.us
This new option terminates the other sessions connected to the target
database and then drop it. To terminate other sessions, the current user
must have desired permissions (same as pg_terminate_backend()). We don't
allow to terminate the sessions if prepared transactions, active logical
replication slots or subscriptions are present in the target database.
Author: Pavel Stehule with changes by me
Reviewed-by: Dilip Kumar, Vignesh C, Ibrar Ahmed, Anthony Nowocien,
Ryan Lambert and Amit Kapila
Discussion: https://postgr.es/m/CAP_rwwmLJJbn70vLOZFpxGw3XD7nLB_7+NKz46H5EOO2k5H7OQ@mail.gmail.com
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
This commit allows --init-steps option in pgbench to accept "G" character
meaning server-side data generation as an initialization step.
With "G", only limited queries are sent from pgbench client and
then data is actually generated in the server. This might make
the initialization phase faster if the bandwidth between pgbench client
and the server is low.
Author: Fabien Coelho
Reviewed-by: Anna Endo, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904061826420.3678@lancre
There's plenty places in frontend code that could benefit from a
string buffer implementation. Some because it yields simpler and
faster code, and some others because of the desire to share code
between backend and frontend.
While there is a string buffer implementation available to frontend
code, libpq's PQExpBuffer, it is clunkier than stringinfo, it
introduces a libpq dependency, doesn't allow for sharing between
frontend and backend code, and has a higher API/ABI stability
requirement due to being exposed via libpq.
Therefore it seems best to just making StringInfo being usable by
frontend code. There's not much to do for that, except for rewriting
two subsequent elog/ereport calls into others types of error
reporting, and deciding on a maximum string length.
For the maximum string size I decided to privately define MaxAllocSize
to the same value as used in the backend. It seems likely that we'll
want to reconsider this for both backend and frontend code in the not
too far away future.
For now I've left stringinfo.h in lib/, rather than common/, to reduce
the likelihood of unnecessary breakage. We could alternatively decide
to provide a redirecting stringinfo.h in lib/, or just not provide
compatibility.
Author: Andres Freund
Reviewed-By: Kyotaro Horiguchi, Daniel Gustafsson
Discussion: https://postgr.es/m/20190920051857.2fhnvhvx4qdddviz@alap3.anarazel.de
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
The code only compared two triggers' names and namespaces (the latter
being the owning table's schema). This could result in falling back
to an OID-based sort of similarly-named triggers on different tables.
We prefer to avoid that, so add a comparison of the table names too.
(The sort order is thus table namespace, trigger name, table name,
which is a bit odd, but it doesn't seem worth contorting the code
to work around that.)
Likewise for policy objects, in 9.5 and up.
Complaint and fix by Benjie Gillam. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/CAMThMzEEt2mvBbPgCaZ1Ap1N-moGn=Edxmadddjq89WG4NpPtQ@mail.gmail.com
The additional newline seems to have accidentally been introduced in
2c03216d83, in 9.5. The newline is only issued when an FPW is
present for the block reference.
While there could be an argument that removing the newlines in the
back branches could cause a problem for somebody parsing the
pg_waldump output, the likelihood of that seems small enough. It seems
at least equally likely that the randomness of when newlines are
issued causes problems.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029233341.4gnyau7e5v2lh5sc@alap3.anarazel.de
Backpatch: 9.5, like 2c03216d83.
Historically, psql consulted COMSPEC to spawn a shell in its \! command,
but we just invoked "cmd" when spawning shells in pg_ctl and pg_regress.
It seems better to rely on the environment variable, if it's set,
in all cases.
It's debatable whether this is a bug fix or just a behavioral change,
so no back-patch.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/16080-5d7f03222469f717@postgresql.org
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Author: Takayuki Tsunakawa
Reviewed-by: Dilip Kumar, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/OSBPR01MB2503CE851940C17DE44AE3D9FE6F0@OSBPR01MB2503.jpnprd01.prod.outlook.com
Backpatch-through: 12
Commit a524f50d0f added
old_11_check_for_sql_identifier_data_type_usage(), but it did not use
the clearer database error list format added to the master branch in
commit 1634d36157. This commit fixes that.
Backpatch-through: master
8ae0d47 marked those options as obsolete back in 2005, with the options
removed from the documentation. This removes the last references to
both options in the code which were kept around for compatibility
purposes with past commands.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/5da284a2-62d9-e338-88d1-26ee5009d93e@gmail.com
When an FK constraint is created, it needs the index on the referenced
table to exist and be valid. When doing parallel pg_restore and the
referenced table was partitioned, this condition can sometimes not be
met, because pg_dump didn't emit sufficient object dependencies to
ensure so; this means that parallel pg_restore would fail in certain
conditions. Fix by having pg_dump make the FK constraint object
dependent on the partition attachment objects for the constraint's
referenced index.
This has been broken since f56f8f8da6, so backpatch to Postgres 12.
Discussion: https://postgr.es/m/20191005224333.GA9738@alvherre.pgsql
The pg_upgrade check for pg_catalog.unknown type when upgrading from 9.6
had a couple of issues with domains and composite types - it detected
even composite types unused in objects with storage. So for example this
was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE unknown_composite AS (u pg_catalog.unknown)
On the other hand, this only happened with composite types directly on
the pg_catalog.unknown data type, but not with a domain. So this was not
detected
CREATE DOMAIN unknown_domain AS pg_catalog.unknown;
CREATE TYPE unknown_composite_2 AS (u unknown_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.unknown type through a domain. So we missed cases like this
CREATE TABLE t (u unknown_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. Backpatch all
the way to 10, where the of pg_catalog.unknown data type was restricted.
Author: Tomas Vondra
Backpatch-to: 10-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
The pg_upgrade check for pg_catalog.line data type when upgrading from
9.3 had a couple of issues with domains and composite types. Firstly, it
triggered false positives for composite types unused in objects with
storage. This was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE line_composite AS (l pg_catalog.line)
On the other hand, this only happened with composite types directly on
the pg_catalog.line data type, but not with a domain. So this was not
detected
CREATE DOMAIN line_domain AS pg_catalog.line;
CREATE TYPE line_composite_2 AS (l line_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.line data type through a domain. So we missed cases like this
CREATE TABLE t (l line_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. 9.3 did not
support domains on composite types, but we can still have multi-level
composite types.
Backpatch all the way to 9.4, where the format for pg_catalog.line data
type changed.
Author: Tomas Vondra
Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
Using glibc's version string to detect potential collation definition
changes is not 100% reliable, but it's better than nothing. Currently
this affects only collations explicitly provided by "libc". More work
will be needed to handle the default collation.
Author: Thomas Munro, based on a suggestion from Christoph Berg
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/4b76c6d4-ae5e-0dc6-7d0d-b5c796a07e34%402ndquadrant.com
Commit 7c15cef86d changed sql_identifier data type to be based on name
instead of varchar. Unfortunately, this breaks on-disk format for this
data type. Luckily, that should be a very rare problem, as this data
type is used only in information_schema views, so this only affects user
objects (tables, materialized views and indexes). One way to end in
such situation is to do CTAS with a query on those system views.
There are two options to deal with this - we can either abort pg_upgrade
if there are user objects with sql_identifier columns in pg_upgrade, or
we could replace the sql_identifier type with varchar. Considering how
rare the issue is expected to be, and the complexity of replacing the
data type (e.g. in matviews), we've decided to go with the simple check.
The query is somewhat complex - the sql_identifier data type may be used
indirectly - through a domain, a composite type or both, possibly in
multiple levels. Detecting this requires a recursive CTE.
Backpatch to 12, where the sql_identifier definition changed.
Reported-by: Hans Buschmann
Author: Tomas Vondra
Reviewed-by: Tom Lane
Backpatch-to: 12
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
Previously, the "Database:" label in the error file was unclear if the
label was a status report or the problem was _in_ the database. New
text is "In database:".
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20191002172337.GC9680@telsasoft.com
Backpatch-through: head
As of d9dd406fe2, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
This includes new TAP tests for a couple of areas not covered yet and
some improvements:
- More coverage for --no-ensure-shutdown, the enforced recovery step and
--dry-run.
- Failures with option combinations and basic option checks.
- Removal of a duplicated comment.
Author: Alexey Kondratov, Michael Paquier
Discussion: https://postgr.es/m/20191007010651.GD14532@paquier.xyz
Temporarily change pg_ctl so that the postmaster's exit status will
be printed (to the postmaster's stdout). This is to help identify
the cause of intermittent "postmaster exited during a parallel
transaction" failures seen on a couple of buildfarm members. This
change degrades pg_ctl's functionality in a couple of minor ways,
so we'll revert it once we've obtained the desired info.
Discussion: https://postgr.es/m/18537.1570421268@sss.pgh.pa.us
This includes a couple of changes around the new behavior of pg_rewind
which enforces recovery to happen once on a cluster not shut down
cleanly:
- Some comments and documentation improvements.
- Shutdown the cluster to rewind with immediate mode in all the tests,
this allows to check after the forced recovery behavior which is wanted
as new default.
- Use -F for the forced recovery step, so as postgres does not use
fsync. This was useless as a final sync is done once the tool is done.
Author: Michael Paquier
Reviewed-by: Alexey Kondratov
Discussion: https://postgr.es/m/20191004083721.GA1829@paquier.xyz
This would be all right, maybe, if it didn't also match a file that
definitely should not be ignored. We don't add rmgrs so often that
manual maintenance of this file list is impractical, so just write
out the list.
(I find the equivalent wildcard use in the Makefile pretty lazy and
unsafe as well, but will leave that alone until it actually causes a
problem.)
Per bug #16042 from Denis Stuchalin.
Discussion: https://postgr.es/m/16042-c174ee692ac21cbd@postgresql.org
This fixes two issues with recent features added in pg_rewind:
- --dry-run should do nothing on the target directory, but 927474c
forgot to consider that for --write-recovery-conf.
- --no-ensure-shutdown was not actually working. There is no test
coverage for this option yet, but a subsequent patch will add that.
Author: Alexey Kondratov
Discussion: https://postgr.es/m/7ca88204-3e0b-2f4c-c8af-acadc4b266e5@postgrespro.ru
Even if --dry-run mode was specified, the control file was getting
updated, preventing follow-up runs of pg_rewind to work properly on the
target data folder. The origin of the problem came from the refactoring
done by ce6afc6.
Author: Alexey Kondratov
Discussion: https://postgr.es/m/7ca88204-3e0b-2f4c-c8af-acadc4b266e5@postgrespro.ru
Backpatch-through: 12
These new options allow users to partition the pgbench_accounts table by
specifying the number of partitions and partitioning method. The values
allowed for partitioning method are range and hash.
This feature allows users to measure the overhead of partitioning if any.
Author: Fabien COELHO
Reviewed-by: Amit Kapila, Amit Langote, Dilip Kumar, Asif Rehman, and
Alvaro Herrera
Discussion: https://postgr.es/m/alpine.DEB.2.21.1907230826190.7008@lancre
If we don't do this, the rewind fails if the server wasn't cleanly shut
down, which seems unhelpful serving no purpose.
Also provide a new option --no-ensure-shutdown to suppress this
behavior, for alleged advanced usage that prefers to avoid the crash
recovery.
Authors: Paul Guo, Jimmy Yih, Ashwin Agrawal
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/CAEET0ZEffUkXc48pg2iqARQgGRYDiiVxDu+yYek_bTwJF+q=Uw@mail.gmail.com
The state-tracking of WAL reading in various places was pretty messy,
mostly because the ancient physical-replication WAL reading code wasn't
using the XLogReader abstraction. This led to some untidy code. Make
it prettier by creating two additional supporting structs,
WALSegmentContext and WALOpenSegment which keep track of WAL-reading
state. This makes code cleaner, as well as supports more future
cleanup.
Author: Antonin Houska
Reviewed-by: Álvaro Herrera and (older versions) Robert Haas
Discussion: https://postgr.es/m/14984.1554998742@spoje.net
Procedures are supported since v11 and \dfp can be used since this
version, but it was not mentioned as a supported option in the
description of describeFunctions() which handles \df in psql.
Extracted from a larger patch.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1908281618520.28828@lancre
When building statistics, we need to decide how many rows to sample and
how accurate the resulting statistics should be. Until now, it was not
possible to explicitly define statistics target for extended statistics
objects, the value was always computed from the per-attribute targets
with a fallback to the system-wide default statistics target.
That's a bit inconvenient, as it ties together the statistics target set
for per-column and extended statistics. In some cases it may be useful
to require larger sample / higher accuracy for extended statics (or the
other way around), but with this approach that's not possible.
So this commit introduces a new command, allowing to specify statistics
target for individual extended statistics objects, overriding the value
derived from per-attribute targets (and the system default).
ALTER STATISTICS stat_name SET STATISTICS target_value;
When determining statistics target for an extended statistics object we
first look at this explicitly set value. When this value is -1, we fall
back to the old formula, looking at the per-attribute targets first and
then the system default. This means the behavior is backwards compatible
with older PostgreSQL releases.
Author: Tomas Vondra
Discussion: https://postgr.es/m/20190618213357.vli3i23vpkset2xd@development
Reviewed-by: Kirk Jamison, Dean Rasheed
Modern versions of msys2 have changed the treatment of "cmd /c" so that
the runtime will try to convert the switch to a native file path. This
patch adds a setting to inhibit that behaviour.
Discussion: https://postgr.es/m/3227042f-cfcc-745a-57dd-fb8c471f8ddf@2ndQuadrant.com
Backpatch to all live branches.
detoast.c/h contain functions required to detoast a datum, partially
or completely, plus a few other utility functions for examining the
size of toasted datums.
toast_internals.c/h contain functions that are used internally to the
TOAST subsystem but which (mostly) do not need to be accessed from
outside.
heaptoast.c/h contains code that is intrinsically specific to the
heap AM, either because it operates on HeapTuples or is based on the
layout of a heap page.
detoast.c and toast_internals.c are placed in
src/backend/access/common rather than src/backend/access/heap. At
present, both files still have dependencies on the heap, but that will
be improved in a future commit.
Patch by me, reviewed and tested by Prabhat Sabu, Thomas Munro,
Andres Freund, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Since the addition of fsync requests in bc34223 to make base backup data
consistent on disk once pg_basebackup finishes, each tablespace tar file
is individually flushed once completed, with an additional flush of the
parent directory when the base backup finishes. While holding a
connection to the server, a fsync request taking a long time may cause a
failure of the base backup, which is annoying for any integration. A
recent example of breakage can involve tcp_user_timeout, but
wal_sender_timeout can cause similar problems.
While reviewing the code, there was a second issue causing too many
fsync requests to be done for the same WAL data. As recursive fsyncs
are done at the end of the backup for both the plain and tar formats
from the base target directory where everything is written, it is fine
to disable fsyncs when fetching or streaming WAL.
Reported-by: Ryohei Takahashi
Author: Michael Paquier
Reviewed-by: Ryohei Takahashi
Discussion: https://postgr.es/m/OSBPR01MB4550DAE2F8C9502894A45AAB82BE0@OSBPR01MB4550.jpnprd01.prod.outlook.com
Backpatch-through: 10
Clarify in the help output and documentation that -n, -t etc. take a
"pattern" rather than a "schema" or "table" etc. This was especially
confusing now that the new pg_dumpall --exclude-database option was
documented with "pattern" and the others not, even though they all
behave the same.
Discussion: https://www.postgresql.org/message-id/flat/b85f3fa1-b350-38d1-1893-4f7911bd7310%402ndquadrant.com
Document that the tablespace sizes are in units of kilobytes. Make
the pg_basebackup source code a bit clearer about this, too.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
After an unexpected connection loss and successful reconnection,
psql neglected to resynchronize its internal state about the server,
such as server version. Ordinarily we'd be reconnecting to the same
server and so this isn't really necessary, but there are scenarios
where we do need to update --- one example is where we have a list
of possible connection targets and they're not all alike.
Define "resynchronize" as including connection_warnings(), so that
this case acts the same as \connect. This seems useful; for example,
if the server version did change, the user might wish to know that.
An attuned user might also notice that the new connection isn't
SSL-encrypted, for example, though this approach isn't especially
in-your-face about such changes. Although this part is a behavioral
change, it only affects interactive sessions, so it should not break
any applications.
Also, in do_connect, make sure that we desynchronize correctly when
abandoning an old connection in non-interactive mode.
These problems evidently are the result of people patching only one
of the two places where psql deals with connection changes, so insert
some cross-referencing comments in hopes of forestalling future bugs
of the same ilk.
Lastly, in Windows builds, issue codepage mismatch warnings only at
startup, not during reconnections. psql's codepage can't change
during a reconnect, so complaining about it again seems like useless
noise.
Peter Billen and Tom Lane. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAMTXbE8e6U=EBQfNSe01Ej17CBStGiudMAGSOPaw-ALxM-5jXg@mail.gmail.com
In this case, the transfer uses a libpq connection, which is subject to
the timeout parameters set at system level, and this can make the rewind
operation suddenly canceled which is not good for automation. One
workaround to such issues would be to use PGOPTIONS to enforce the
wanted timeout parameters, but that's annoying, and for example pg_dump,
which can run potentially long-running queries disables all types of
timeouts.
lock_timeout and statement_timeout are the ones which can cause problems
now. Note that pg_rewind does not use transactions, so disabling
idle_in_transaction_session_timeout is optional, but it feels safer to
do so for the future.
This is back-patched down to 9.5. idle_in_transaction_session_timeout
is only present since 9.6.
Author: Alexander Kukushkin
Discussion: https://postgr.es/m/CAFh8B=krcVXksxiwVQh1SoY+ziJ-JC=6FcuoBL3yce_40Es5_g@mail.gmail.com
Backpatch-through: 9.5
FD_SETSIZE needs to be declared before winsock2.h, or it is possible to
run into buffer overflow issues when using --jobs. This is similar to
pgbench's solution done in a23c641.
This has been introduced by 71d84ef, and older versions have been using
the default value of FD_SETSIZE, defined at 64.
Per buildfarm member jacana, but this impacts all Windows animals
running the TAP tests. I have reproduced the failure locally to check
the patch.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20190826054000.GE7005@paquier.xyz
Backpatch-through: 9.5
Previously 'uname -r' on Msys2 reported a kernele release starting with
2. The latest version starts with 3. In commit 1638623f we specifically
looked for one starting with 2. This is now changed to look for any
digit between 2 and 9.
backpatch to release 10.
On msys2, 'uname -s' reports a string starting MSYS instead on MINGW
as happens on msys1. Treat these both the same way. This reverts
608a710195 in favor of a more general solution.
Backpatch to all live branches.
When trying to use a high number of jobs, vacuumdb (and more recently
reindexdb) has only checked for a maximum number of jobs used, causing
confusing failures when running out of file descriptors when the jobs
open connections to Postgres. This commit changes the error handling so
as we do not check anymore for a maximum number of allowed jobs when
parsing the option value with FD_SETSIZE, but check instead if a file
descriptor is within the supported range when opening the connections
for the jobs so as this is detected at the earliest time possible.
Also, improve the error message to give a hint about the number of jobs
recommended, using a wording given by the reviewers of the patch.
Reported-by: Andres Freund
Author: Michael Paquier
Reviewed-by: Andres Freund, Álvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20190818001858.ho3ev4z57fqhs7a5@alap3.anarazel.de
Backpatch-through: 9.5
POSIX permits getopt() to advance optind beyond argc when the last
argv entry is an option that requires an argument and hasn't got one.
It seems that no major platforms actually do that, but musl does,
so that something like "psql -f" would crash with that libc.
Add a check that optind is in range before trying to look at the
possibly-bogus option.
Report and fix by Quentin Rameau. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/20190825100617.GA6087@fifth.space
FD_SETSIZE is included in sys/select.h per POSIX, and this header
inclusion has been moved to scripts_parallel.c as of 5f38403 without
moving the variable, causing a compilation failure on recent versions of
OpenBSD (6.6 was the version used in the report).
In order to take care of the failure, move FD_SETSIZE directly to
scripts_parallel.c with a wrapper controlling the maximum number of
parallel slots supported, based on a suggestion by Andres Freund.
While on it, reduce the maximum number to be less than FD_SETSIZE,
leaving some room for stdin, stdout and such as they consume some file
descriptors.
The buildfarm did not complain about that, as it happens to only be
an issue on recent versions of OpenBSD and there is no coverage in this
area. 51c3e9f fixed a similar set of issues.
Bug: #15964
Reported-by: Sean Farrell
Discussion: https://postgr.es/m/15964-c1753bdfed722e04@postgresql.org
Commit 07b39083c inserted an unconditional reference to pg_opfamily,
which of course fails on servers predating that catalog. Fortunately,
the case it's trying to solve can't occur on such old servers (AFAIK).
Hence, just skip the additional code when the source predates 8.3.
Per bug #15955 from sly. Back-patch to all supported branches,
like the previous patch.
Discussion: https://postgr.es/m/15955-1daa2e676e903d87@postgresql.org
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
I left PG_CMD_PUTS around even though it could be handled by
PG_CMD_PRINTF since PG_CMD_PUTS is sometimes called with non-literal
arguments, and so that would create a potential problem if such a
string contained percent signs.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Since pg_dump doesn't treat the member operators and functions of operator
classes/families (that is, the pg_amop and pg_amproc entries, not the
underlying operators/functions) as separate dumpable objects, it missed
their dependency information. I think this was safe when the code was
designed, because the default object sorting rule emits operators and
functions before opclasses, and there were no dependency types that could
mess that up. However, the introduction of range types in 9.2 broke it:
now a type can have a dependency on an opclass, allowing dependency rules
to push the opclass before the type and hence before custom operators.
Lacking any information showing that it shouldn't do so, pg_dump emitted
the objects in the wrong order.
Fix by teaching getDependencies() to translate pg_depend entries for
pg_amop/amproc rows to look like dependencies for their parent opfamily.
I added a regression test for this in HEAD/v12, but not further back;
life is too short to fight with 002_pg_dump.pl.
Per bug #15934 from Tom Gottfried. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15934-58b8c8ab7a09ea15@postgresql.org
This has been wrong ever since pg_rewind was added. The if-branch just
above this, where we print the same error with an extra message supplied
by XLogReadRecord() got this right, but the variable name was wrong in the
else-branch. As a consequence, the error printed the WAL position as
0/0 if there was an error reading a WAL file.
Backpatch to 9.5, where pg_rewind was added.
When building a list of relations for a parallel processing of a schema
or a database (or just a single-entry list for the non-parallel case
with the database name), the list is allocated and built on-the-fly for
each database processed, leaking after one database-level reindex is
done. This accumulates leaks when processing all databases, and could
become a visible issue with thousands of relations.
This is fixed by introducing a new routine in simple_list.c to free all
the elements in a simple list made of strings or OIDs. The header of
the list may be using a variable declaration or an allocated pointer,
so we don't have a routine to free this part to keep the interface
simple.
Per report from coverity for an issue introduced by 5ab892c, and
valgrind complains about the leak as well. The idea to introduce a new
routine in simple_list.c is from Tom Lane.
Author: Michael Paquier
Reviewed-by: Tom Lane
When doing a schema-level or a database-level operation, a list of
relations to build is created which gets processed in parallel using
multiple connections, based on the recent refactoring for parallel slots
in src/bin/scripts/. System catalogs are processed first in a
serialized fashion to prevent deadlocks, followed by the rest done in
parallel.
This new option is not compatible with --system as reindexing system
catalogs in parallel can lead to deadlocks, and with --index as there is
no conflict handling for indexes rebuilt in parallel depending in the
same relation.
Author: Julien Rouhaud
Reviewed-by: Sergei Kornilov, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
Make the directory where the pg_upgrade binary resides the default for
new bindir, as running the pg_upgrade binary from where the new
cluster is installed is a very common scenario. Setting this as the
defauly bindir for the new cluster will remove the need to provide it
explicitly via -B in many cases.
To support directories being missing from option parsing, extend the
directory check with a missingOk mode where the path must be filled at
a later point before being used. Also move the exec_path check to
earlier in setup to make sure we know the new cluster bindir when we
scan for required executables.
This removes the exec_path from the OSInfo struct as it is not used
anywhere.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Some platforms create a file named "localtime" in the system
timezone directory, making it a copy or link to the active time
zone file. If Postgres is built with --with-system-tzdata, initdb
will see that file as an exact match to localtime(3)'s behavior,
and it may decide that "localtime" is the most preferred spelling of
the active zone. That's a very bad choice though, because it's
neither informative, nor portable, nor stable if someone changes
the system timezone setting. Extend the preference logic added by
commit e3846a00c so that we will prefer any other zone file that
matches localtime's behavior over "localtime".
On the same logic, also discriminate against "posixrules", which
is another not-really-a-zone file that is often present in the
timezone directory. (Since we install "posixrules" but not
"localtime", this change can affect the behavior of Postgres
with or without --with-system-tzdata.)
Note that this change doesn't prevent anyone from choosing these
pseudo-zones if they really want to (i.e., by setting TZ for initdb,
or modifying the timezone GUC later on). It just prevents initdb
from preferring these zone names when there are multiple matches to
localtime's behavior.
Since we generally prefer to keep timezone-related behavior the
same in all branches, and since this is arguably a bug fix,
back-patch to all supported branches.
Discussion: https://postgr.es/m/CADT4RqCCnj6FKLisvT8tTPfTP4azPhhDFJqDF1JfBbOH5w4oyQ@mail.gmail.com
Discussion: https://postgr.es/m/27991.1560984458@sss.pgh.pa.us
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
describeOneTableDetails issued a partition-constraint-fetching query
for every table, even ones it knows perfectly well are not partitions.
To add insult to injury, it then proceeded to leak the empty PGresult
if the table wasn't a partition. Doing that a lot of times might
amount to a meaningful leak, so this seems like a back-patchable bug.
Fix that, and also fix a related PGresult leak in the partition-parent
case (though that leak would occur only if we got no row, which is
unexpected).
Minor code beautification too, to make this code look more like the
pre-existing code around it.
Back-patch the whole change into v12. However, the fact that we already
know whether the table is a partition dates only to commit 1af25ca0c;
back-patching the relevant changes from that is probably more churn
than is justified in released branches. Hence, in v11 and v10, just
do the minimum to fix the PGresult leaks.
Noted while messing around with adjacent code for yesterday's \d
improvements.
Windows hosts do not normally come with expr, so instead of using that
to test the \setshell command, use echo instead, which is fairly
universally available.
Backpatch to release 11, where this came in.
Problem found by me, patch by Fabien Coelho.
Include partitioning information much as we do for partitioned tables.
(However, \d+ doesn't show the partition bounds, because those are
not stored for indexes.)
In passing, fix a couple of queries to look less messy in -E output.
Also, add some tests for \d on tables with nondefault tablespaces.
(Somebody previously added a rather silly number of tests for \d
on partitioned indexes, yet completely neglected other cases.)
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
Add the name of the owning table to the footers for a TOAST table.
Also, show all the same footers as for a regular table (in practice,
this adds the index and perhaps the tablespace and access method).
Justin Pryzby, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/20190422154902.GH14223@telsasoft.com
The logic in ATExecDropColumn that rejects dropping partition key
columns is quite an inadequate defense, because it doesn't execute
in cases where a column needs to be dropped due to cascade from
something that only the column, not the whole partitioned table,
depends on. That leaves us with a badly broken partitioned table;
even an attempt to load its relcache entry will fail.
We really need to have explicit pg_depend entries that show that the
column can't be dropped without dropping the whole table. Hence,
add those entries. In v12 and HEAD, bump catversion to ensure that
partitioned tables will have such entries. We can't do that in
released branches of course, so in v10 and v11 this patch affords
protection only to partitioned tables created after the patch is
installed. Given the lack of field complaints (this bug was found
by fuzz-testing not by end users), that's probably good enough.
In passing, fix ATExecDropColumn and ATPrepAlterColumnType
messages to be more specific about which partition key column
they're complaining about.
Per report from Manuel Rigger. Back-patch to v10 where partitioned
tables were added.
Discussion: https://postgr.es/m/CA+u7OA4JKCPFrdrAbOs7XBiCyD61XJxeNav4LefkSmBLQ-Vobg@mail.gmail.com
Discussion: https://postgr.es/m/31920.1562526703@sss.pgh.pa.us
Change the defaults for the pg_hba.conf generated by initdb to "peer"
for local (if supported, else "md5") and "md5" for host.
(Changing from "md5" to SCRAM is left as a separate exercise.)
"peer" is currently not supported on AIX, HP-UX, and Windows. Users
on those operating systems will now either have to provide a password
to initdb or choose a different authentication method when running
initdb.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/bec17f0a-ddb1-8b95-5e69-368d9d0a3390%40postgresql.org
Several buildfarm members have been complaining about that with gcc,
like jacana. Weirdly enough, Visual Studio's compilers do not find this
issue.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20190719050830.GK1859@paquier.xyz
The existing facility of vacuumdb to handle parallel connections into a
given database with an authentication set is moved to a common file in
src/bin/scripts/, named scripts_parallel.c. This introduces a set of
routines to initialize, wait and terminate a set of connections,
simplifying a bit the code of vacuumdb on the way. More routines
related to result handling and database connection are moved to
common.c.
The initial plan is to use that for reindexdb, but it could be applied
to other tools like clusterdb.
While on it, clean up a set of variables "progname" which were defined
as routine arguments for error messages. Since most of the callers have
switched to pg_log_error() and such there is no need for this variable.
Author: Julien Rouhaud
Reviewed-by: Michael Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CAOBaU_YrnH_Jqo46NhaJ7uRBiWWEcS40VNRQxgFbqYo9kApUsg@mail.gmail.com
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
Commit 578b229718 replaced it with a
concurrent "nextval" test. That version does not detect PostgreSQL's
incompatibility with xlc 13.1.3, so bring back an OID-based test that
does. Back-patch to v12, where that commit first appeared.
Discussion: https://postgr.es/m/20190707170035.GA1485546@rfd.leadboat.com
Amit Kapila
Thomas Munro
Tom Lane
Fujii Masao
Andres Freund
Michael Paquier
Bruce Momjian
Alvaro Herrera
Tomas Vondra
Peter Eisentraut
Andrew Dunstan
Robert Haas
Heikki Linnakangas
Noah Misch