that has parameters is always planned afresh for each Bind command,
treating the parameter values as constants in the planner. This removes
the performance penalty formerly often paid for using out-of-line
parameters --- with this definition, the planner can do constant folding,
LIKE optimization, etc. After a suggestion by Andrew@supernews.
merely a matter of fixing the error check, since the underlying Portal
infrastructure already handles it. This in turn allows these statements
to be used in some existing plpgsql and plperl contexts, such as a
plpgsql FOR loop. Also, do some marginal code cleanup in places that
were being sloppy about distinguishing SELECT from SELECT INTO.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
same data type and same typmod, we show that typmod as the output
typmod, rather than generic -1. This responds to several complaints
over the past few years about UNIONs unexpectedly dropping length or
precision info.
contradictory WHERE-clauses applied to a relation. This makes the
GUC variable constraint_exclusion rather inappropriately named,
but I've refrained for the moment from renaming it.
Per example from Martin Lesser.
This doesn't matter too much for ordinary NOTs, since prepqual.c does
its best to get rid of those, but it helps with IS NOT TRUE clauses
which the rule rewriter likes to insert. Per example from Martin Lesser.
(e.g. "INSERT ... VALUES (...), (...), ...") and elsewhere as allowed
by the spec. (e.g. similar to a FROM clause subselect). initdb required.
Joe Conway and Tom Lane.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
effects in a nestloop inner indexscan, I had only dealt with plain index
scans and the index portion of bitmap scans. But there will be cache
benefits for the heap accesses of bitmap scans too, so fix
cost_bitmap_heap_scan() to account for that.
clauses containing no variables and no volatile functions. Such a clause
can be used as a one-time qual in a gating Result plan node, to suppress
plan execution entirely when it is false. Even when the clause is true,
putting it in a gating node wins by avoiding repeated evaluation of the
clause. In previous PG releases, query_planner() would do this for
pseudoconstant clauses appearing at the top level of the jointree, but
there was no ability to generate a gating Result deeper in the plan tree.
To fix it, get rid of the special case in query_planner(), and instead
process pseudoconstant clauses through the normal RestrictInfo qual
distribution mechanism. When a pseudoconstant clause is found attached to
a path node in create_plan(), pull it out and generate a gating Result at
that point. This requires special-casing pseudoconstants in selectivity
estimation and cost_qual_eval, but on the whole it's pretty clean.
It probably even makes the planner a bit faster than before for the normal
case of no pseudoconstants, since removing pull_constant_clauses saves one
useless traversal of the qual tree. Per gripe from Phil Frost.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
that the Mackert-Lohmann formula applies across all the repetitions of the
nestloop, not just each scan independently. We use the M-L formula to
estimate the number of pages fetched from the index as well as from the table;
that isn't what it was designed for, but it seems reasonably applicable
anyway. This makes large numbers of repetitions look much cheaper than
before, which accords with many reports we've received of overestimation
of the cost of a nestloop. Also, change the index access cost model to
charge random_page_cost per index leaf page touched, while explicitly
not counting anything for access to metapage or upper tree pages. This
may all need tweaking after we get some field experience, but in simple
tests it seems to be giving saner results than before. The main thing
is to get the infrastructure in place to let cost_index() and amcostestimate
functions take repeated scans into account at all. Per my recent proposal.
Note: this patch changes pg_proc.h, but I did not force initdb because
the changes are basically cosmetic --- the system does not look into
pg_proc to decide how to call an index amcostestimate function, and
there's no way to call such a function from SQL at all.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
output, ie, no OR immediately below an OR. Otherwise we get Asserts or
wrong answers for cases such as
select * from tenk1 a, tenk1 b
where (a.ten = b.ten and (a.unique1 = 100 or a.unique1 = 101))
or (a.hundred = b.hundred and a.unique1 = 42);
Per report from Rafael Martinez Guerrero.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
would basically punt in all cases for 'foo <> ALL (array)', which resulted
in a performance regression for NOT IN compared to what we were doing in
8.1 and before. Per report from Pavel Stehule.
relations: fix the executor so that we can have an Append plan on the
inside of a nestloop and still pass down outer index keys to index scans
within the Append, then generate such plans as if they were regular
inner indexscans. This avoids the need to evaluate the outer relation
multiple times.
... in fact, it will be applied now in any query whatsoever. I'm still
a bit concerned about the cycles that might be expended in failed proof
attempts, but given that CE is turned off by default, it's the user's
choice whether to expend those cycles or not. (Possibly we should
change the simple bool constraint_exclusion parameter to something
more fine-grained?)
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
they were broken-out AND or OR lists. The least grotty way to do this
seemed to be to set up a general mechanism for handling nodes as though
they were ANDs or ORs. There's no other immediate use for it, but perhaps
we might want to use the mechanism someday for things like BETWEEN
SYMMETRIC.
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
make_restrictinfo_from_bitmapqual. The likelihood of finding duplicates
seems much less than in the AND-subclause case, and the cost much higher,
because OR lists with hundreds or even thousands of subclauses are not
uncommon. Per discussion with Ilia Kantor and andrew@supernews.
predicate_implied_by() to detect redundant filter conditions, but forgot
that predicate_implied_by() assumes its first argument contains only
immutable functions. Add a check to guarantee that. Also, test to see
if filter conditions can be discarded because they are redundant with
the predicate of a partial index.
planning logic for bitmap indexscans. Partial indexes create corner
cases in which a scan might be done with no explicit index qual conditions,
and the code wasn't handling those cases nicely. Also be a little
tenser about eliminating redundant clauses in the generated plan.
Per report from Dmitry Karasik.
coding would ignore startup cost differences of less than 1% of the
estimated total cost; which was OK for normal planning but highly not OK
if a very small LIMIT was applied afterwards, so that startup cost becomes
the name of the game. Instead, compare startup and total costs fuzzily
but independently. This changes the plan selected for two queries in the
regression tests; adjust expected-output files for resulting changes in
row order. Per reports from Dawid Kuroczko and Sam Mason.
cases: we can't just consider whether the subquery's output is unique on its
own terms, we have to check whether the set of output columns we are going to
use will be unique. Per complaint from Luca Pireddu and test case from
Michael Fuhr.
able to do this before, but I had tried to make an exception for functions
with OUT parameters. Michael Fuhr found one problem with it already, and
I found another, which was it didn't work for strict functions with a
NULL input. While both of these could be worked around, the probability
that there are more gotchas seems high; I think prudence dictates just
reverting to the former behavior for now. Accordingly, remove the kluge
added to get_expr_result_type() for Michael's case.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
Tom Lane
Joe Conway
Bruce Momjian
Peter Eisentraut