XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
If the standby was streaming when trigger file arrives, check also in the
archive for additional WAL files. This is a corner case since it is
unlikely that we would trigger a failover while the master is still
available and sending data to standby, while at the same time running in
archive mode and also while the streaming standby has fallen behind archive.
Someone would eventually be unlucky; we must plug all gaps however small.
Fujii Masao
Prior to 9.0, restartpoints never created, deleted, or recycled WAL
files, but now they can. This code makes log_checkpoints treat
checkpoints and restartpoints symmetrically. It also adjusts up
the documentation of the parameter to mention restartpoints.
Fujii Masao. Docs by me, as suggested by Itagaki Takahiro.
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
rather than 0/0, so that we can safely use 0/0 as an invalid value. This is a
more future-proof fix for the corner-case bug in streaming replication that
was fixed yesterday. We had a similar corner-case bug with log/seg 0/0 back in
February as well. Avoiding 0/0 as a valid value should prevent bugs like that
in the future. Per Tom Lane's idea.
Back-patch to 9.0. Since this only affects bootstrapping, it makes no
difference to existing installations. We don't need to worry about the
bug in existing installations, because if you've managed to get past the
initial base backup already, you won't hit the bug in the future either.
streaming replication. We used log/seg 0/0 to indicate that no WAL segments
have been removed since startup, but 0/0 is a valid value for the very first
WAL segment after initdb. To make that disambiguous, store
(latest removed WAL segment + 1) in the global variable.
Per report from Matt Chesler, also reproduced by Greg Smith.
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
Simon Riggs
Robert Haas
Tom Lane
Bruce Momjian
Heikki Linnakangas
Magnus Hagander
Peter Eisentraut