Eager freezing strategy avoids large build-ups of all-visible pages. It
makes VACUUM trigger page-level freezing whenever doing so will enable
the page to become all-frozen in the visibility map. This is useful for
tables that experience continual growth, particularly strict append-only
tables such as pgbench's history table. Eager freezing significantly
improves performance stability by spreading out the cost of freezing
over time, rather than doing most freezing during aggressive VACUUMs.
It complements the insert autovacuum mechanism added by commit b07642db.
VACUUM determines its freezing strategy based on the value of the new
vacuum_freeze_strategy_threshold GUC (or reloption) with logged tables.
Tables that exceed the size threshold use the eager freezing strategy.
Unlogged tables and temp tables always use eager freezing strategy,
since the added cost is negligible there. Non-permanent relations won't
incur any extra overhead in WAL written (for the obvious reason), nor in
pages dirtied (since any extra freezing will only take place on pages
whose PD_ALL_VISIBLE bit needed to be set either way).
VACUUM uses lazy freezing strategy for logged tables that fall under the
GUC size threshold. Page-level freezing triggers based on the criteria
established in commit 1de58df4, which added basic page-level freezing.
Eager freezing is strictly more aggressive than lazy freezing. Settings
like vacuum_freeze_min_age still get applied in just the same way in
every VACUUM, independent of the strategy in use. The only mechanical
difference between eager and lazy freezing strategies is that only the
former applies its own additional criteria to trigger freezing pages.
Note that even lazy freezing strategy will trigger freezing whenever a
page happens to have required that an FPI be written during pruning,
provided that the page will thereby become all-frozen in the visibility
map afterwards (due to the FPI optimization from commit 1de58df4).
The vacuum_freeze_strategy_threshold default setting is 4GB. This is a
relatively low setting that prioritizes performance stability. It will
be reviewed at the end of the Postgres 16 beta period.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
Use a dedicated struct for the XID/MXID cutoffs used by VACUUM, such as
FreezeLimit and OldestXmin. This state is initialized in vacuum.c, and
then passed around by code from vacuumlazy.c to heapam.c freezing
related routines. The new convention is that everybody works off of the
same cutoff state, which is passed around via pointers to const.
Also simplify some of the logic for dealing with frozen xmin in
heap_prepare_freeze_tuple: add dedicated "xmin_already_frozen" state to
clearly distinguish xmin XIDs that we're going to freeze from those that
were already frozen from before. That way the routine's xmin handling
code is symmetrical with the existing xmax handling code. This is
preparation for an upcoming commit that will add page level freezing.
Also refactor the control flow within FreezeMultiXactId(), while adding
stricter sanity checks. We now test OldestXmin directly, instead of
using FreezeLimit as an inexact proxy for OldestXmin. This is further
preparation for the page level freezing work, which will make the
function's caller cede control of page level freezing to the function
where appropriate (where heap_prepare_freeze_tuple sees a tuple that
happens to contain a MultiXactId in its xmax).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CAH2-WznS9TxXmz2_=SY+SyJyDFbiOftKofM9=aDo68BbXNBUMA@mail.gmail.com
Currently a table can only be vacuumed or analyzed by its owner or
a superuser. This can now be extended to any user by means of an
appropriate GRANT.
Nathan Bossart
Reviewed by: Bharath Rupireddy, Kyotaro Horiguchi, Stephen Frost, Robert
Haas, Mark Dilger, Tom Lane, Corey Huinker, David G. Johnston, Michael
Paquier.
Discussion: https://postgr.es/m/20220722203735.GB3996698@nathanxps13
Pass VACUUM parameters (VacuumParams state) to vacuum_set_xid_limits()
directly, rather than passing most individual VacuumParams fields as
separate arguments.
Also make vacuum_set_xid_limits() output parameter symbol names match
those used by its vacuumlazy.c caller.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wz=TE7gW5DgSahDkf0UEZigFGAoHNNN6EvSrdzC=Kn+hrA@mail.gmail.com
Before now, the cutoffs that VACUUM used to determine which XIDs/MXIDs
to freeze were determined at the start of each VACUUM by taking related
cutoffs that represent which XIDs/MXIDs VACUUM should treat as still
running, and subtracting an XID/MXID age based value controlled by GUCs
like vacuum_freeze_min_age. The FreezeLimit cutoff (XID freeze cutoff)
was derived by subtracting an XID age value from OldestXmin, while the
MultiXactCutoff cutoff (MXID freeze cutoff) was derived by subtracting
an MXID age value from OldestMxact. This approach didn't match the
approach used nearby to determine whether this VACUUM operation should
be an aggressive VACUUM or not.
VACUUM now uses the standard approach instead: it subtracts the same
age-based values from next XID/next MXID (rather than subtracting from
OldestXmin/OldestMxact). This approach is simpler and more uniform.
Most of the time it will have only a negligible impact on how and when
VACUUM freezes. It will occasionally make VACUUM more robust in the
event of problems caused by long running transaction. These are cases
where OldestXmin and OldestMxact are held back by so much that they
attain an age that is a significant fraction of the value of age-based
settings like vacuum_freeze_min_age.
There is no principled reason why freezing should be affected in any way
by the presence of a long-running transaction -- at least not before the
point that the OldestXmin and OldestMxact limits used by each VACUUM
operation attain an age that makes it unsafe to freeze some of the
XIDs/MXIDs whose age exceeds the value of the relevant age-based
settings. The new approach should at least make freezing degrade more
gracefully than before, even in the most extreme cases.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkOv5CEeyOO=c91XnT5WBR_0gii0Wn5UbZhJ=4TTykDYg@mail.gmail.com
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
Report on scanned pages within VACUUM VERBOSE and autovacuum logging.
These are pages that were physically examined during the VACUUM
operation. Note that this can include a small number of pages that were
marked all-visible in the visibility map by some earlier VACUUM
operation. VACUUM won't skip all-visible pages that aren't part of a
range of all-visible pages that's at least 32 blocks in length (partly
to avoid missing out on opportunities to advance relfrozenxid during
non-aggressive VACUUMs).
Commit 44fa8488 simplified the definition of scanned pages. It became
the complement of the pages (of those pages from rel_pages) that were
skipped using the visibility map. And so scanned pages precisely
indicates how effective the visibility map was at saving work. (Before
now we displayed the number of pages skipped via the visibility map when
happened to be frozen pages, but not when they were merely all-visible,
which was less useful to users.)
Rename the user-visible OldestXmin output field to "removal cutoff", and
show some supplementary information: how far behind the cutoff is
(number of XIDs behind) by the time the VACUUM operation finished. This
will help users to figure out what's _not_ working in extreme cases
where VACUUM is fundamentally unable to remove dead tuples or freeze
older tuples (e.g., due to a leaked replication slot). Also report when
relfrozenxid is advanced by VACUUM in output that immediately follows
"removal cutoff". This structure is intended to highlight the
relationship between the new relfrozenxid value for the table, and the
VACUUM operation's removal cutoff.
Finally, add instrumentation of "missed dead tuples", and the number of
pages that had at least one such tuple. These are fully DEAD (not just
RECENTLY_DEAD) tuples with storage that could not be pruned due to
failure to acquire a cleanup lock on a heap page. This is a replacement
for the "skipped due to pin" instrumentation removed by commit 44fa8488.
It shows more details than before for pages where failing to get a
cleanup lock actually resulted in VACUUM missing out on useful work, but
usually shows nothing at all instead (the mere fact that we couldn't get
a cleanup lock is usually of no consequence whatsoever now).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wznp=c=Opj8Z7RMR3G=ec3_JfGYMN_YvmCEjoPCHzWbx0g@mail.gmail.com
The log_autovacuum_min_duration instrumentation used its own dedicated
code for logging, which was not reused by VACUUM VERBOSE. This was
highly duplicative, and sometimes led to each code path using slightly
different accounting for essentially the same information.
Clean things up by making VACUUM VERBOSE reuse the same instrumentation
code. This code restructuring changes the structure of the VACUUM
VERBOSE output itself, but that seems like an overall improvement. The
most noticeable change in VACUUM VERBOSE output is that it no longer
outputs a distinct message per index per round of index vacuuming. Most
of the same information (about each index) is now shown in its new
per-operation summary message. This is far more legible.
A few details are no longer displayed by VACUUM VERBOSE, but that's no
real loss in practice, especially in the common case where we don't need
multiple index scans/rounds of vacuuming. This super fine-grained
information is still available via DEBUG2 messages, which might still be
useful in debugging scenarios.
VACUUM VERBOSE now shows new instrumentation, which is typically very
useful: all of the log_autovacuum_min_duration instrumentation that it
missed out on before now. This includes information about WAL overhead,
buffers hit/missed/dirtied information, and I/O timing information.
VACUUM VERBOSE still retains a few INFO messages of its own. This is
limited to output concerning the progress of heap rel truncation, as
well as some basic information about parallel workers. These details
are still potentially quite useful. They aren't a good fit for the log
output, which must summarize the whole operation.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmW4Me7_qR4X4ka7pxP-jGmn7=Npma_-Z-9Y1eD0MQRLw@mail.gmail.com
This commit moves parallel vacuum related code to a new file
commands/vacuumparallel.c so that any table AM supporting indexes can
utilize parallel vacuum in order to call index AM callbacks (ambulkdelete
and amvacuumcleanup) with parallel workers.
Another reason for this refactoring is that the parallel vacuum isn't
specific to heap so it doesn't make sense to keep this code in
heap/vacuumlazy.c.
Author: Masahiko Sawada, based on suggestion from Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila, Haiying Tang
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
Commit b4af70cb, which simplified state managed by VACUUM, performed
refactoring of parallel VACUUM in passing. Confusion about the exact
details of the tasks that the leader process is responsible for led to
code that made it possible for parallel VACUUM to miss a subset of the
table's indexes entirely. Specifically, indexes that fell under the
min_parallel_index_scan_size size cutoff were missed. These indexes are
supposed to be vacuumed by the leader (alongside any parallel unsafe
indexes), but weren't vacuumed at all. Affected indexes could easily
end up with duplicate heap TIDs, once heap TIDs were recycled for new
heap tuples. This had generic symptoms that might be seen with almost
any index corruption involving structural inconsistencies between an
index and its table.
To fix, make sure that the parallel VACUUM leader process performs any
required index vacuuming for indexes that happen to be below the size
cutoff. Also document the design of parallel VACUUM with these
below-size-cutoff indexes.
It's unclear how many users might be affected by this bug. There had to
be at least three indexes on the table to hit the bug: a smaller index,
plus at least two additional indexes that themselves exceed the size
cutoff. Cases with just one additional index would not run into
trouble, since the parallel VACUUM cost model requires two
larger-than-cutoff indexes on the table to apply any parallel
processing. Note also that autovacuum was not affected, since it never
uses parallel processing.
Test case based on tests from a larger patch to test parallel VACUUM by
Masahiko Sawada.
Many thanks to Kamigishi Rei for her invaluable help with tracking this
problem down.
Author: Peter Geoghegan <pg@bowt.ie>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Reported-By: Kamigishi Rei <iijima.yun@koumakan.jp>
Reported-By: Andrew Gierth <andrew@tao11.riddles.org.uk>
Diagnosed-By: Andres Freund <andres@anarazel.de>
Bug: #17245
Discussion: https://postgr.es/m/17245-ddf06aaf85735f36@postgresql.org
Discussion: https://postgr.es/m/20211030023740.qbnsl2xaoh2grq3d@alap3.anarazel.de
Backpatch: 14-, where the refactoring commit appears.
Generalize the INDEX_CLEANUP VACUUM parameter (and the corresponding
reloption): make it into a ternary style boolean parameter. It now
exposes a third option, "auto". The "auto" option (which is now the
default) enables the "bypass index vacuuming" optimization added by
commit 1e55e7d1.
"VACUUM (INDEX_CLEANUP TRUE)" is redefined to once again make VACUUM
simply do any required index vacuuming, regardless of how few dead
tuples are encountered during the first scan of the target heap relation
(unless there are exactly zero). This gives users a way of opting out
of the "bypass index vacuuming" optimization, if for whatever reason
that proves necessary. It is also expected to be used by PostgreSQL
developers as a testing option from time to time.
"VACUUM (INDEX_CLEANUP FALSE)" does the same thing as it always has: it
forcibly disables both index vacuuming and index cleanup. It's not
expected to be used much in PostgreSQL 14. The failsafe mechanism added
by commit 1e55e7d1 addresses the same problem in a simpler way.
INDEX_CLEANUP can now be thought of as a testing and compatibility
option.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAH2-WznrBoCST4_Gxh_G9hA8NzGUbeBGnOUC8FcXcrhqsv6OHQ@mail.gmail.com
Add a failsafe mechanism that is triggered by VACUUM when it notices
that the table's relfrozenxid and/or relminmxid are dangerously far in
the past. VACUUM checks the age of the table dynamically, at regular
intervals.
When the failsafe triggers, VACUUM takes extraordinary measures to
finish as quickly as possible so that relfrozenxid and/or relminmxid can
be advanced. VACUUM will stop applying any cost-based delay that may be
in effect. VACUUM will also bypass any further index vacuuming and heap
vacuuming -- it only completes whatever remaining pruning and freezing
is required. Bypassing index/heap vacuuming is enabled by commit
8523492d, which made it possible to dynamically trigger the mechanism
already used within VACUUM when it is run with INDEX_CLEANUP off.
It is expected that the failsafe will almost always trigger within an
autovacuum to prevent wraparound, long after the autovacuum began.
However, the failsafe mechanism can trigger in any VACUUM operation.
Even in a non-aggressive VACUUM, where we're likely to not advance
relfrozenxid, it still seems like a good idea to finish off remaining
pruning and freezing. An aggressive/anti-wraparound VACUUM will be
launched immediately afterwards. Note that the anti-wraparound VACUUM
that follows will itself trigger the failsafe, usually before it even
begins its first (and only) pass over the heap.
The failsafe is controlled by two new GUCs: vacuum_failsafe_age, and
vacuum_multixact_failsafe_age. There are no equivalent reloptions,
since that isn't expected to be useful. The GUCs have rather high
defaults (both default to 1.6 billion), and are expected to generally
only be used to make the failsafe trigger sooner/more frequently.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAD21AoD0SkE11fMw4jD4RENAwBMcw1wasVnwpJVw3tVqPOQgAw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzmgH3ySGYeC-m-eOBsa2=sDwa292-CFghV4rESYo39FsQ@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
This continues the work done in b5913f6. All the options of those
commands are changed to use hex values rather than enums to reduce the
risk of compatibility bugs when introducing new options. Each option
set is moved into a new structure that can be extended with more
non-boolean options (this was already the case of VACUUM). The code of
REINDEX is restructured so as manual REINDEX commands go through a
single routine from utility.c, like VACUUM, to ease the allocation
handling of option parameters when a command needs to go through
multiple transactions.
This can be used as a base infrastructure for future patches related to
those commands, including reindex filtering and tablespace support.
Per discussion with people mentioned below, as well as Alvaro Herrera
and Peter Eisentraut.
Author: Michael Paquier, Justin Pryzby
Reviewed-by: Alexey Kondratov, Justin Pryzby
Discussion: https://postgr.es/m/X8riynBLwxAD9uKk@paquier.xyz
This fixes a bug in the edge case where, for a temp table, heap_page_prune()
can end up with a different horizon than heap_vacuum_rel(). Which can trigger
errors like "ERROR: cannot freeze committed xmax ...".
The bug was introduced due to interaction of a7212be8b9 "Set cutoff xmin more
aggressively when vacuuming a temporary table." with dc7420c2c9 "snapshot
scalability: Don't compute global horizons while building snapshots.".
The problem is caused by lazy_scan_heap() assuming that the only reason its
HeapTupleSatisfiesVacuum() call would return HEAPTUPLE_DEAD is if the tuple is
a HOT tuple, or if the tuple's inserting transaction has aborted since the
heap_page_prune() call. But after a7212be8b9 that was also possible in other
cases for temp tables, because heap_page_prune() uses a different visibility
test after dc7420c2c9.
The fix is fairly simple: Move the special case logic for temp tables from
vacuum_set_xid_limits() to the infrastructure introduced in dc7420c2c9. That
ensures that the horizon used for pruning is at least as aggressive as the one
used by lazy_scan_heap(). The concrete horizon used for temp tables is
slightly different than the logic in dc7420c2c9, but should always be as
aggressive as before (see comments).
A significant benefit to centralizing the logic procarray.c is that now the
more aggressive horizons for temp tables does not just apply to VACUUM but
also to e.g. HOT pruning and the nbtree killtuples logic.
Because isTopLevel is not needed by vacuum_set_xid_limits() anymore, I
undid the the related changes from a7212be8b9.
This commit also adds an isolation test ensuring that the more aggressive
vacuuming and pruning of temp tables keeps working.
Debugged-By: Amit Kapila <amit.kapila16@gmail.com>
Debugged-By: Tom Lane <tgl@sss.pgh.pa.us>
Debugged-By: Ashutosh Sharma <ashu.coek88@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201014203103.72oke6hqywcyhx7s@alap3.anarazel.de
Discussion: https://postgr.es/m/20201015083735.derdzysdtqdvxshp@alap3.anarazel.de
Since other sessions aren't allowed to look into a temporary table
of our own session, we do not need to worry about the global xmin
horizon when setting the vacuum XID cutoff. Indeed, if we're not
inside a transaction block, we may set oldestXmin to be the next
XID, because there cannot be any in-doubt tuples in a temp table,
nor any tuples that are dead but still visible to some snapshot of
our transaction. (VACUUM, of course, is never inside a transaction
block; but we need to test that because CLUSTER shares the same code.)
This approach allows us to always clean out a temp table completely
during VACUUM, independently of concurrent activity. Aside from
being useful in its own right, that simplifies building reproducible
test cases.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
This commit adds new parameter to VACUUM command, TRUNCATE,
which specifies that VACUUM should attempt to truncate off
any empty pages at the end of the table and allow the disk space
for the truncated pages to be returned to the operating system.
This parameter, if specified, overrides the vacuum_truncate
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoD+qtrSDL=GSma4Wd3kLYLeRC0hPna-YAdkDeV4z156vg@mail.gmail.com
This commit adds a new reloption, vacuum_index_cleanup, which
controls whether index cleanup is performed for a particular
relation by default. It also adds a new option to the VACUUM
command, INDEX_CLEANUP, which can be used to override the
reloption. If neither the reloption nor the VACUUM option is
used, the default is true, as before.
Masahiko Sawada, reviewed and tested by Nathan Bossart, Alvaro
Herrera, Kyotaro Horiguchi, Darafei Praliaskouski, and me.
The wording of the documentation is mostly due to me.
Discussion: http://postgr.es/m/CAD21AoAt5R3DNUZSjOoXDUY=naYPUOuffVsRzuTYMz29yLzQCA@mail.gmail.com
Like commit f41551f61f, this aims
to make it easier to add non-Boolean options to VACUUM (or, in
this case, to ANALYZE). Instead of building up a bitmap of
options directly in the parser, build up a list of DefElem
objects and let ExecVacuum() sort it out; right now, we make
no use of the fact that a DefElem can carry an associated value,
but it will be easy to make that change in the future.
Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoATE4sn0jFFH3NcfUZXkU2BMbjBWB_kDj-XWYA-LXDcQA@mail.gmail.com
Many places need both, so this allows a few functions to take one
fewer parameter. More importantly, as soon as we add a VACUUM
option that takes a non-Boolean parameter, we need to replace
'int options' with a struct, and it seems better to think
of adding more fields to VacuumParams rather than passing around
both VacuumParams and a separate struct as well.
Patch by me, reviewed by Masahiko Sawada
Discussion: http://postgr.es/m/CA+Tgmob6g6-s50fyv8E8he7APfwCYYJ4z0wbZC2yZeSz=26CYQ@mail.gmail.com
When we first put in collations support, we basically punted on teaching
pg_statistic, ANALYZE, and the planner selectivity functions about that.
They've just used DEFAULT_COLLATION_OID independently of the actual
collation of the data. It's time to improve that, so:
* Add columns to pg_statistic that record the specific collation associated
with each statistics slot.
* Teach ANALYZE to use the column's actual collation when comparing values
for statistical purposes, and record this in the appropriate slot. (Note
that type-specific typanalyze functions are now expected to fill
stats->stacoll with the appropriate collation, too.)
* Teach assorted selectivity functions to use the actual collation of
the stats they are looking at, instead of just assuming it's
DEFAULT_COLLATION_OID.
This should give noticeably better results in selectivity estimates for
columns with nondefault collations, at least for query clauses that use
that same collation (which would be the default behavior in most cases).
It's still true that comparisons with explicit COLLATE clauses different
from the stored data's collation won't be well-estimated, but that's no
worse than before. Also, this patch does make the first step towards
doing better with that, which is that it's now theoretically possible to
collect stats for a collation other than the column's own collation.
Patch by me; thanks to Peter Eisentraut for review.
Discussion: https://postgr.es/m/14706.1544630227@sss.pgh.pa.us
VACUUM and ANALYZE share similar logic when it comes to opening a
relation to work on in terms of how the relation is opened, in which
order locks are tried and how logs should be generated when something
does not work as expected.
This commit refactors things so as both use the same code path to handle
the way a relation is opened, so as the integration of new options
becomes easier.
Author: Michael Paquier
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/20180927075152.GT1659@paquier.xyz
A caller of VACUUM can perform early lookup obtention which can cause
other sessions to block on the request done, causing potentially DOS
attacks as even a non-privileged user can attempt a vacuum fill of a
critical catalog table to block even all incoming connection attempts.
Contrary to TRUNCATE, a client could attempt a system-wide VACUUM after
building the list of relations to VACUUM, which can cause vacuum_rel()
or analyze_rel() to try to lock the relation but the operation would
just block. When the client specifies a list of relations and the
relation needs to be skipped, ownership checks are done when building
the list of relations to work on, preventing a later lock attempt.
vacuum_rel() already had the sanity checks needed, except that those
were applied too late. This commit refactors the code so as relation
skips are checked beforehand, making it safer to avoid too early locks,
for both manual VACUUM with and without a list of relations specified.
An isolation test is added emulating the fact that early locks do not
happen anymore, issuing a WARNING message earlier if the user calling
VACUUM is not a relation owner.
When a partitioned table is listed in a manual VACUUM or ANALYZE
command, its full list of partitions is fetched, all partitions get
added to the list to work on, and then each one of them is processed one
by one, with ownership checks happening at the later phase of
vacuum_rel() or analyze_rel(). Trying to do early ownership checks for
each partition is proving to be tedious as this would result in deadlock
risks with lock upgrades, and skipping all partitions if the listed
partitioned table is not owned would result in a behavior change
compared to how Postgres 10 has implemented vacuum for partitioned
tables. The original problem reported related to early lock queue for
critical relations is fixed anyway, so priority is given to avoiding a
backward-incompatible behavior.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180812222142.GA6097@paquier.xyz
The existing logic for updating pg_class.reltuples trusted the sampling
results only for the pages ANALYZE actually visited, preferring to
believe the previous tuple density estimate for all the unvisited pages.
While there's some rationale for doing that for VACUUM (first that
VACUUM is likely to visit a very nonrandom subset of pages, and second
that we know for sure that the unvisited pages did not change), there's
no such rationale for ANALYZE: by assumption, it's looked at an unbiased
random sample of the table's pages. Furthermore, in a very large table
ANALYZE will have examined only a tiny fraction of the table's pages,
meaning it cannot slew the overall density estimate very far at all.
In a table that is physically growing, this causes reltuples to increase
nearly proportionally to the change in relpages, regardless of what is
actually happening in the table. This has been observed to cause reltuples
to become so much larger than reality that it effectively shuts off
autovacuum, whose threshold for doing anything is a fraction of reltuples.
(Getting to the point where that would happen seems to require some
additional, not well understood, conditions. But it's undeniable that if
reltuples is seriously off in a large table, ANALYZE alone will not fix it
in any reasonable number of iterations, especially not if the table is
continuing to grow.)
Hence, restrict the use of vac_estimate_reltuples() to VACUUM alone,
and in ANALYZE, just extrapolate from the sample pages on the assumption
that they provide an accurate model of the whole table. If, by very bad
luck, they don't, at least another ANALYZE will fix it; in the old logic
a single bad estimate could cause problems indefinitely.
In HEAD, let's remove vac_estimate_reltuples' is_analyze argument
altogether; it was never used for anything and now it's totally pointless.
But keep it in the back branches, in case any third-party code is calling
this function.
Per bug #15005. Back-patch to all supported branches.
David Gould, reviewed by Alexander Kuzmenkov, cosmetic changes by me
Discussion: https://postgr.es/m/20180117164916.3fdcf2e9@engels
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Commit 83e176ec18 removed the longstanding
support functions for block sampling without any consideration of the
impact this would have on third-party FDWs. The new API is not notably
more functional for FDWs than the old, so forcing them to change doesn't
seem like a good thing. We can provide the old API as a wrapper (more
or less) around the new one for a minimal amount of extra code.
Peter Geoghegan
Tom Lane
Bruce Momjian
Andrew Dunstan
Robert Haas
Amit Kapila
Michael Paquier
Andres Freund
Peter Eisentraut
Fujii Masao
Peter Eisentraut