in favor of using the REINDEX TABLE apparatus, which does the same thing
simpler and faster. Also, make TRUNCATE not use cluster.c at all, but
just assign a new relfilenode and REINDEX. This partially addresses
Hartmut Raschick's complaint from last December that 7.4's TRUNCATE is
an order of magnitude slower than prior releases. By getting rid of
a lot of unnecessary catalog updates, these changes buy back about a
factor of two (on my system). The remaining overhead seems associated
with creating and deleting storage files, which we may not be able to
do much about without abandoning transaction safety for TRUNCATE.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
now able to cope with assigning new relfilenode values to nailed-in-cache
indexes, so they can be reindexed using the fully crash-safe method. This
leaves only shared system indexes as special cases. Remove the 'index
deactivation' code, since it provides no useful protection in the shared-
index case. Require reindexing of shared indexes to be done in standalone
mode, but remove other restrictions on REINDEX. -P (IgnoreSystemIndexes)
now prevents using indexes for lookups, but does not disable index updates.
It is therefore safe to allow from PGOPTIONS. Upshot: reindexing system catalogs
can be done without a standalone backend for all cases except
shared catalogs.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
pg_relcheck is gone; CHECK, UNIQUE, PRIMARY KEY, and FOREIGN KEY
constraints all have real live entries in pg_constraint. pg_depend
exists, and RESTRICT/CASCADE options work on most kinds of DROP;
however, pg_depend is not yet very well populated with dependencies.
(Most of the ones that are present at this point just replace formerly
hardwired associations, such as the implicit drop of a relation's pg_type
entry when the relation is dropped.) Need to add more logic to create
dependency entries, improve pg_dump to dump constraints in place of
indexes and triggers, and add some regression tests.
in schemas other than the system namespace; however, there's no search
path yet, and not all operations work yet on tables outside the system
namespace.
Improve 'pg_internal.init' relcache entry preload mechanism so that it is
safe to use for all system catalogs, and arrange to preload a realistic
set of system-catalog entries instead of only the three nailed-in-cache
indexes that were formerly loaded this way. Fix mechanism for deleting
out-of-date pg_internal.init files: this must be synchronized with transaction
commit, not just done at random times within transactions. Drive it off
relcache invalidation mechanism so that no special-case tests are needed.
Cache additional information in relcache entries for indexes (their pg_index
tuples and index-operator OIDs) to eliminate repeated lookups. Also cache
index opclass info at the per-opclass level to avoid repeated lookups during
relcache load.
Generalize 'systable scan' utilities originally developed by Hiroshi,
move them into genam.c, use in a number of places where there was formerly
ugly code for choosing either heap or index scan. In particular this allows
simplification of the logic that prevents infinite recursion between syscache
and relcache during startup: we can easily switch to heapscans in relcache.c
when and where needed to avoid recursion, so IndexScanOK becomes simpler and
does not need any expensive initialization.
Eliminate useless opening of a heapscan data structure while doing an indexscan
(this saves an mdnblocks call and thus at least one kernel call).
lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
pass-by-ref data types --- eg, an index on lower(textfield) --- no longer
leak memory during index creation or update. Clean up a lot of redundant
code ... did you know that copy, vacuum, truncate, reindex, extend index,
and bootstrap each basically duplicated the main executor's logic for
extracting information about an index and preparing index entries?
Functional indexes should be a little faster now too, due to removal
of repeated function lookups.
CREATE INDEX 'opt_type' clause is deimplemented by these changes,
but I haven't removed it from the parser yet (need to merge with
Thomas' latest change set first).
memory contexts. Currently, only leaks in expressions executed as
quals or projections are handled. Clean up some old dead cruft in
executor while at it --- unused fields in state nodes, that sort of thing.
Don't go through pg_exec_query_dest(), but directly to the execution
routines. Also, extend parameter lists so that there's no need to
change the global setting of allowSystemTableMods, a hack that was
certain to cause trouble in the event of any error.
entry that has rules. This allows us to release the rule parsetrees
on relcache flush without needing a working freeObject() routine.
Formerly, the rule trees were leaked permanently at relcache flush.
Also, clean up handling of rule creation and deletion --- there was
not sufficient locking of the relation being modified, and there was
no reliable notification of other backends that a relcache reload
was needed. Also, clean up relcache.c code so that scans of system
tables needed to load a relcache entry are done in the caller's
memory context, not in CacheMemoryContext. This prevents any
un-pfreed memory from those scans from becoming a permanent memory
leak.
passing the index-is-unique flag to index build routines (duh! ...
why wasn't it done this way to begin with?). Aside from eliminating
an eyesore, this should save a few milliseconds in btree index creation
because a full scan of pg_index is not needed any more.
a field was labelled as a primary key, the system automatically
created a unique index on the field. This patch extends it so
that the index has the indisprimary field set. You can pull a list
of primary keys with the followiing select.
SELECT pg_class.relname, pg_attribute.attname
FROM pg_class, pg_attribute, pg_index
WHERE pg_class.oid = pg_attribute.attrelid AND
pg_class.oid = pg_index.indrelid AND
pg_index.indkey[0] = pg_attribute.attnum AND
pg_index.indisunique = 't';
There is nothing in this patch that modifies the template database to
set the indisprimary attribute for system tables. Should they be
changed or should we only be concerned with user tables?
D'Arcy
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Tom Lane
PostgreSQL Daemon
Bruce Momjian
Hiroshi Inoue