Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
There's no need to hold onto the locks until the files are needed,
and by doing it this way, we reduce the impact on other backends who
may be awaiting locks we hold.
Noah Misch
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
This reverts commit 18fb9d8d21. Per
discussion, it does not seem like a good idea to allow committed changes to
go un-checkpointed indefinitely, as could happen in a low-traffic server;
that makes us entirely reliant on the WAL stream with no redundancy that
might aid data recovery in case of disk failure.
This re-introduces the original problem of hot-standby setups generating a
small continuing stream of WAL traffic even when idle, but there are other
ways to address that without compromising crash recovery, so we'll revisit
that issue in a future release cycle.
This provides a speedup of about 4X when NBuffers is large enough.
There is also a useful reduction in sinval traffic, since we
only do CacheInvalidateSmgr() once not once per fork.
Simon Riggs, reviewed and somewhat revised by Tom Lane
WALSender now woken up after each background flush by WALwriter, avoiding
multi-second replication delay for an all-async commit workload.
Replication delay reduced from 7s with default settings to 200ms and often
much less, allowing significantly reduced data loss at failover.
Andres Freund and Simon Riggs
In lazy_scan_heap, we could issue bogus warnings about incorrect
information in the visibility map, because we checked the visibility
map bit before locking the heap page, creating a race condition. Fix
by rechecking the visibility map bit before we complain. Rejigger
some related logic so that we rely on the possibly-outdated
all_visible_according_to_vm value as little as possible.
In heap_multi_insert, it's not safe to clear the visibility map bit
before beginning the critical section. The visibility map is not
crash-safe unless we treat clearing the bit as a critical operation.
Specifically, if the transaction were to error out after we set the
bit and before entering the critical section, we could end up writing
the heap page to disk (with the bit cleared) and crashing before the
visibility map page made it to disk. That would be bad. heap_insert
has this correct, but somehow the order of operations got rearranged
when heap_multi_insert was added.
Also, add some more comments to visibilitymap_test, lazy_scan_heap,
and IndexOnlyNext, expounding on concurrency issues.
Per extensive code review by Andres Freund, and further review by Tom
Lane, who also made the original report about the bogus warnings.
When we allowed read-only transactions to skip assigning XIDs
we introduced the possibility that a fully deleted btree page
could be reused. This broke the index link sequence which could
then lead to indexscans silently returning fewer rows than would
have been correct. The actual incidence of silent errors from
this is thought to be very low because of the exact workload
required and locking pre-conditions. Fix is to remove pages only
if index page opaque->btpo.xact precedes RecentGlobalXmin.
Noah Misch, reviewed by Simon Riggs
We used to mimic the way a stack is constructed when descending the tree
during normal GiST inserts, but that was quite complicated during a buffered
build. It was also wrong: in GiST, the left-to-right relationships on
different levels might not match each other, so that when you know the
parent of a child page, you won't necessarily find the parent of the page to
the right of the child page by following the rightlinks at the parent level.
This sometimes led to "could not re-find parent" errors while building a
GiST index.
We now use a simple hash table to track the parent of every internal page.
Whenever a page is split, and downlinks are moved from one page to another,
we update the hash table accordingly. This is also better for performance
than the old method, as we never need to move right to re-find the parent
page, which could take a significant amount of time for buffers that were
created much earlier in the index build.
There were two bugs here: We forgot to call gistFreeBuildBuffers() function
at the end of build, and we passed interXact == true to BufFileCreateTemp,
so the file wasn't automatically cleaned up at end-of-transaction either.
The result of (maintenance_work_mem * 1024) / BLCKSZ doesn't fit in a signed
32-bit integer, if maintenance_work_mem >= 2GB. Use double instead. And
while we're at it, write the calculations in an easier to understand form,
with the intermediary steps written out and commented.
AbortOutOfAnyTransaction failed to do anything if the state it saw on
entry corresponded to failing partway through StartTransaction. I fixed
AbortCurrentTransaction to cope with that case way back in commit
60b2444cc3, but evidently overlooked that
AbortOutOfAnyTransaction should do likewise.
Back-patch to all supported branches. It's not clear that this omission
has any more-than-cosmetic consequences, but it's also not clear that it
doesn't, so back-patching seems the least risky choice.
The only interesting-for-performance case wherein we force heapscan here
is when we're rebuilding the relcache init file, and the only such case
that is likely to be examining a catalog big enough to be syncscanned is
RelationBuildTupleDesc. But the early-exit optimization in that code gets
broken if we start the scan at a random place within the catalog, so that
allowing syncscan is actually a big deoptimization if pg_attribute is large
(at least for the normal case where the rows for core system catalogs have
never been changed since initdb). Hence, prevent syncscan here. Per my
testing pursuant to complaints from Jeff Frost and Greg Sabino Mullane,
though neither of them seem to have actually hit this specific problem.
Back-patch to 8.3, where syncscan was introduced.
If a seqscan encounters many consecutive pages containing only dead tuples,
it can remain in the loop in heapgettup for a long time, and there was no
CHECK_FOR_INTERRUPTS anywhere in that loop. This meant there were
real-world situations where a query would be effectively uncancelable for
long stretches. Add a check placed to occur once per page, which should be
enough to provide reasonable response time without adding any measurable
overhead.
Report and patch by Merlin Moncure (though I tweaked it a bit).
Back-patch to all supported branches.
When we create a temporary copy of the old node buffer, in stack, we mustn't
leak that into any of the long-lived data structures. Before this patch,
when we called gistPopItupFromNodeBuffer(), it got added to the array of
"loaded buffers". After gistRelocateBuildBuffersOnSplit() exits, the
pointer added to the loaded buffers array points to garbage. Often that goes
unnotied, because when we go through the array of loaded buffers to unload
them, buffers with a NULL pageBuffer are ignored, which can often happen by
accident even if the pointer points to garbage.
This patch fixes that by marking the temporary copy in stack explicitly as
temporary, and refrain from adding buffers marked as temporary to the array
of loaded buffers.
While we're at it, initialize nodeBuffer->pageBlocknum to InvalidBlockNumber
and improve comments a bit. This isn't strictly necessary, but makes
debugging easier.
If the amount of freespace on page was less than the amount reserved by
fillfactor, the calculation would underflow.
This fixes bug #6643 reported by Tomonari Katsumata.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
When inserting the downlinks for a split gist page, we used hold the locks
on the child pages until the insertion into the parent - and recursively its
parent if it had to be split too - were all completed. Change that so that
the locks on child pages are released after the insertion in the immediate
parent is done, before recursing further up the tree.
This reduces the number of lwlocks that are held simultaneously. Holding
many locks is bad for concurrency, and in extreme cases you can even hit
the limit of 100 simultaneously held lwlocks in a backend. If you're really
unlucky, you can hit the limit while in a critical section, which brings
down the whole system.
This fixes bug #6629 reported by Tom Forbes. Backpatch to 9.1. The page
splitting code was rewritten in 9.1, and the old code did not have this
problem.
Users of asynchronous-commit mode expect there to be a guaranteed maximum
delay before an async commit's WAL records get flushed to disk. The
original version of the walwriter hibernation patch broke that. Add an
extra shared-memory flag to allow async commits to kick the walwriter out
of hibernation mode, without adding any noticeable overhead in cases where
no action is needed.
This patch modifies the walwriter process so that, when it has not found
anything useful to do for many consecutive wakeup cycles, it extends its
sleep time to reduce the server's idle power consumption. It reverts to
normal as soon as it's done any successful flushes. It's still true that
during any async commit, backends check for completed, unflushed pages of
WAL and signal the walwriter if there are any; so that in practice the
walwriter can get awakened and returned to normal operation sooner than the
sleep time might suggest.
Also, improve the checkpointer so that it uses a latch and a computed delay
time to not wake up at all except when it has something to do, replacing a
previous hardcoded 0.5 sec wakeup cycle. This also is primarily useful for
reducing the server's power consumption when idle.
In passing, get rid of the dedicated latch for signaling the walwriter in
favor of using its procLatch, since that comports better with possible
generic signal handlers using that latch. Also, fix a pre-existing bug
with failure to save/restore errno in walwriter's signal handlers.
Peter Geoghegan, somewhat simplified by Tom
At the time we check whether the tuple is dead to all running
transactions, we've already verified that it isn't visible to our
scan, setting hint bits if appropriate. So there's no need to
recheck CLOG for the all-dead test we do just a moment later.
So, add HeapTupleIsSurelyDead() to test the appropriate condition
under the assumption that all relevant hit bits are already set.
Review by Tom Lane.
This patch adjusts the core statistics views to match the decision already
taken for pg_stat_statements, that values representing elapsed time should
be represented as float8 and measured in milliseconds. By using float8,
we are no longer tied to a specific maximum precision of timing data.
(Internally, it's still microseconds, but we could now change that without
needing changes at the SQL level.)
The columns affected are
pg_stat_bgwriter.checkpoint_write_time
pg_stat_bgwriter.checkpoint_sync_time
pg_stat_database.blk_read_time
pg_stat_database.blk_write_time
pg_stat_user_functions.total_time
pg_stat_user_functions.self_time
pg_stat_xact_user_functions.total_time
pg_stat_xact_user_functions.self_time
The first four of these are new in 9.2, so there is no compatibility issue
from changing them. The others require a release note comment that they
are now double precision (and can show a fractional part) rather than
bigint as before; also their underlying statistics functions now match
the column definitions, instead of returning bigint microseconds.
The alternative of disallowing index-only scans in HS operation was
discussed, but the consensus was that it was better to treat marking
a page all-visible as a recovery conflict for snapshots that could still
fail to see XIDs on that page. We may in the future try to soften this,
so that we simply force index scans to do heap fetches in cases where
this may be an issue, rather than throwing a hard conflict.
The previous code could cause a backend crash after BEGIN; SAVEPOINT a;
LOCK TABLE foo (interrupted by ^C or statement timeout); ROLLBACK TO
SAVEPOINT a; LOCK TABLE foo, and might have leaked strong-lock counts
in other situations.
Report by Zoltán Böszörményi; patch review by Jeff Davis.
When using synchronous replication, we waited for the commit record to be
replicated, but if we our transaction didn't write any other WAL records,
that's not required because we don't even flush the WAL locally to disk in
that case. This lead to long waits when committing a transaction that only
modified a temporary table. Bug spotted by Thom Brown.
XLOG_GIN_UPDATE_META_PAGE and XLOG_GIN_DELETE_LISTPAGE records were printed
with a list link field labeled as "blkno", which was confusing, especially
when the link was empty (InvalidBlockNumber). Print the metapage block
number instead, since that's what's actually being updated. We could
include the link values too as a separate field, but not clear it's worth
the trouble.
Back-patch to 8.4 where the dubious code was added.
Initialise ckptXidEpoch from starting checkpoint and maintain the correct
value as we roll forwards. This allows GetNextXidAndEpoch() to return the
correct epoch when executed during recovery. Backpatch to 9.0 when the
problem is first observable by a user.
Bug report from Daniel Farina
It used to be case that lazy vacuum could call this function with only
a shared lock on the buffer, but neither lazy vacuum nor any other
code path does that any more. Simplify the code accordingly and clean
up some related, obsolete comments.
For those variables only used when asserts are enabled, use a new
macro PG_USED_FOR_ASSERTS_ONLY, which expands to
__attribute__((unused)) when asserts are not enabled.
A leaf tuple that we need to delete could get moved as a consequence of an
insertion happening concurrently with the VACUUM scan. If it moves from a
page past the current scan point to a page before, we'll miss it, which is
not acceptable. Hence, when we see a leaf-page REDIRECT that could have
been made since our scan started, chase down the redirection pointer much
as if we were doing a normal index search, and be sure to vacuum every page
it leads to. This fixes the issue because, if the tuple was on page N at
the instant we start our scan, we will surely find it as a consequence of
chasing the redirect from page N, no matter how much it moves around in
between. Problem noted by Takashi Yamamoto.
This patch fixes the other major compatibility-breaking limitation of
SPGiST, that it didn't store anything for null values of the indexed
column, and so could not support whole-index scans or "x IS NULL"
tests. The approach is to create a wholly separate search tree for
the null entries, and use fixed "allTheSame" insertion and search
rules when processing this tree, instead of calling the index opclass
methods. This way the opclass methods do not need to worry about
dealing with nulls.
Catversion bump is for pg_am updates as well as the change in on-disk
format of SPGiST indexes; there are some tweaks in SPGiST WAL records
as well.
Heavily rewritten version of a patch by Oleg Bartunov and Teodor Sigaev.
(The original also stored nulls separately, but it reused GIN code to do
so; which required undesirable compromises in the on-disk format, and
would likely lead to bugs due to the GIN code being required to work in
two very different contexts.)
Peter Eisentraut
Robert Haas
Tom Lane
Bruce Momjian
Simon Riggs
Heikki Linnakangas