detect postmaster death. Postmaster keeps the write-end of the pipe open,
so when it dies, children get EOF in the read-end. That can conveniently
be waited for in select(), which allows eliminating some of the polling
loops that check for postmaster death. This patch doesn't yet change all
the loops to use the new mechanism, expect a follow-on patch to do that.
This changes the interface to WaitLatch, so that it takes as argument a
bitmask of events that it waits for. Possible events are latch set, timeout,
postmaster death, and socket becoming readable or writeable.
The pipe method behaves slightly differently from the kill() method
previously used in PostmasterIsAlive() in the case that postmaster has died,
but its parent has not yet read its exit code with waitpid(). The pipe
returns EOF as soon as the process dies, but kill() continues to return
true until waitpid() has been called (IOW while the process is a zombie).
Because of that, change PostmasterIsAlive() to use the pipe too, otherwise
WaitLatch() would return immediately with WL_POSTMASTER_DEATH, while
PostmasterIsAlive() would claim it's still alive. That could easily lead to
busy-waiting while postmaster is in zombie state.
Peter Geoghegan with further changes by me, reviewed by Fujii Masao and
Florian Pflug.
XLOG_XACT_COMMIT_COMPACT leaves out invalidation messages and relfilenodes,
saving considerable space for the vast majority of transaction commits.
XLOG_XACT_COMMIT keeps same definition as XLOG_PAGE_MAGIC 0xD067 and earlier.
Leonardo Francalanci and Simon Riggs
This involves two main changes from the previous behavior. First,
when we set a bit in the visibility map, emit a new WAL record of type
XLOG_HEAP2_VISIBLE. Replay sets the page-level PD_ALL_VISIBLE bit and
the visibility map bit. Second, when inserting, updating, or deleting
a tuple, we can no longer get away with clearing the visibility map
bit after releasing the lock on the corresponding heap page, because
an intervening crash might leave the visibility map bit set and the
page-level bit clear. Making this work requires a bit of interface
refactoring.
In passing, a few minor but related cleanups: change the test in
visibilitymap_set and visibilitymap_clear to throw an error if the
wrong page (or no page) is pinned, rather than silently doing nothing;
this case should never occur. Also, remove duplicate definitions of
InvalidXLogRecPtr.
Patch by me, review by Noah Misch.
ReadRecord's habit of using both direct references to tmpRecPtr and
references to *RecPtr (which is pointing at tmpRecPtr) triggers an
optimization bug in gcc 4.6.0, which apparently has forgotten about
aliasing rules. Avoid the compiler bug, and make the code more readable
to boot, by getting rid of the direct references. Improve the comments
while at it.
Back-patch to all supported versions, in case they get built with 4.6.0.
Tom Lane, with some cosmetic suggestions from Alex Hunsaker
Before commit c016ce7281, this wasn't
needed, but now that multiple resource manager IDs can percolate down
through here, we have to make sure we know which one we've got.
Otherwise, we can confuse (for example) an XLOG_XACT_COMMIT record
with an XLOG_CHECKPOINT_SHUTDOWN record.
Review by Jaime Casanova
crash recovery, and throw an error if not. hubert depesz lubaczewski pointed
out that that situation also happens in the crash recovery following a
system crash that happens during an online backup.
We might want to do something smarter in 9.1, like put the check back for
backups taken with pg_basebackup, but that's for another patch.
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
archive recovery.
It's possible to restore an online backup without recovery.conf, by simply
copying all the necessary WAL files to pg_xlog. "pg_basebackup -x" does that
too. That's the use case where this cross-check is useful.
Backpatch to 9.0. We used to do this in earlier versins, but in 9.0 the code
was inadvertently changed so that the check is only performed after archive
recovery.
Fujii Masao.
Change location LOG message so it works each time we pause, not
just for final pause.
Ensure that we pause only if we are in Hot Standby and can connect
to allow us to run resume function. This change supercedes the
code to override parameter recoveryPauseAtTarget to false if not
attempting to enter Hot Standby, which is now removed.
Startup process waited for cleanup lock but when hot_standby = off
the pid was not registered, so that the bgwriter would not wake
the waiting process as intended.
ensure that they use different checkpoints as the starting point. We use
the checkpoint redo location as a unique identifier for the base backup in
the end-of-backup record, and in the backup history file name.
Bug spotted by Fujii Masao.
than doing it aggressively whenever the tail-XID pointer is advanced, because
this way we don't need to do it while holding SerializableXactHashLock.
This also fixes bug #5915 spotted by YAMAMOTO Takashi, and removes an
obsolete comment spotted by Kevin Grittner.
periodically rescan the archive for new timelines, while waiting for new WAL
segments to arrive. This allows you to set up a standby server that follows
the TLI change if another standby server is promoted to master. Before this,
you had to restart the standby server to make it notice the new timeline.
This patch only scans the archive for TLI changes, it won't follow a TLI
change in streaming replication. That is much needed too, but it would be a
much bigger patch than I dare to sneak in this late in the release cycle.
There was discussion on improving the sanity checking of the WAL segments so
that the system would notice more reliably if the new timeline isn't an
ancestor of the current one, but that is not included in this patch.
Reviewed by Fujii Masao.
Emit a log message when creating a named restore point, and improve
documentation for pg_create_restore_point().
Euler Taveira de Oliveira, per suggestions from Thom Brown, with some
additional wordsmithing by me.
Standby optionally sends back information about oldestXmin of queries
which is then checked and applied to the WALSender's proc->xmin.
GetOldestXmin() is modified slightly to agree with GetSnapshotData(),
so that all backends on primary include WALSender within their snapshots.
Note this does nothing to change the snapshot xmin on either master or
standby. Feedback piggybacks on the standby reply message.
vacuum_defer_cleanup_age is no longer used on standby, though parameter
still exists on primary, since some use cases still exist.
Simon Riggs, review comments from Fujii Masao, Heikki Linnakangas, Robert Haas
though must not update the last transaction timestamp.
Plus comment and message cleanup for recent named restore point.
Fujii Masao, minor changes by me
the standby has written, flushed, and applied the WAL. At the moment, this
is for informational purposes only, the values are only shown in
pg_stat_replication system view, but in the future they will also be needed
for synchronous replication.
Extracted from Simon riggs' synchronous replication patch by Robert Haas, with
some tweaking by me.
Specifying this option makes the server not wait for the
xlog to be archived, or emit a warning that it can't,
instead leaving the responsibility with the client.
This is useful when the log is being streamed using
the streaming protocol in parallel with the backup,
without having log archiving enabled.
new recovery.conf parameter recovery_target_name allows PITR to
specify named points as recovery targets.
Jaime Casanova, reviewed by Euler Taveira de Oliveira, plus minor edits
If the standby was streaming when trigger file arrives, check also in the
archive for additional WAL files. This is a corner case since it is
unlikely that we would trigger a failover while the master is still
available and sending data to standby, while at the same time running in
archive mode and also while the streaming standby has fallen behind archive.
Someone would eventually be unlucky; we must plug all gaps however small.
Fujii Masao
Prior to 9.0, restartpoints never created, deleted, or recycled WAL
files, but now they can. This code makes log_checkpoints treat
checkpoints and restartpoints symmetrically. It also adjusts up
the documentation of the parameter to mention restartpoints.
Fujii Masao. Docs by me, as suggested by Itagaki Takahiro.
With this patch, pg_basebackup doesn't write a backup_label file in the
data directory, so it doesn't interfere with a pg_start/stop_backup() based
backup anymore. backup_label is still included in the backup, but it is
injected directly into the tar stream.
Heikki Linnakangas, reviewed by Fujii Masao and Magnus Hagander.
If wal_buffers is initially set to -1 (which is now the default), it's
replaced by 1/32nd of shared_buffers, with a minimum of 8 (the old default)
and a maximum of the XLOG segment size. The allowed range for manual
settings is still from 4 up to whatever will fit in shared memory.
Greg Smith, with implementation correction by me.
Move the actual functionality into a separate function that's
easier to call internally, and change the SQL-callable function
to be a wrapper calling this.
Also create a pg_abort_backup() function, only callable internally,
that does only the most vital parts of pg_stop_backup(), making it
safe(r) to call from error handlers.
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
This privilege is required to do Streaming Replication, instead of
superuser, making it possible to set up a SR slave that doesn't
have write permissions on the master.
Superuser privileges do NOT override this check, so in order to
use the default superuser account for replication it must be
explicitly granted the REPLICATION permissions. This is backwards
incompatible change, in the interest of higher default security.
Purely cosmetic patch to make our coding standards more consistent ---
we were doing symbolic some places and octal other places. This patch
fixes all C-coded uses of mkdir, chmod, and umask. There might be some
other calls I missed. Inconsistency noted while researching tablespace
directory permissions issue.
an old transaction running in the master, and a lot of transactions have
started and finished since, and a WAL-record is written in the gap between
the creating the running-xacts snapshot and WAL-logging it, recovery will fail
with "too many KnownAssignedXids" error. This bug was reported by
Joachim Wieland on Nov 19th.
In the same scenario, when fewer transactions have started so that all the
xids fit in KnownAssignedXids despite the first bug, a more serious bug
arises. We incorrectly initialize the clog code with the oldest still running
transaction, and when we see the WAL record belonging to a transaction with
an XID larger than one that committed already before the checkpoint we're
recovering from, we zero the clog page containing the already committed
transaction, leading to data loss.
In hindsight, trying to track xids in the known-assigned-xids array before
seeing the running-xacts record was too complicated. To fix that, hold
XidGenLock while the running-xacts snapshot is taken and WAL-logged. That
ensures that no transaction can begin or end in that gap, so that in recvoery
we know that the snapshot contains all transactions running at that point in
WAL.
This eliminates some crufty, special-purpose code and, as a non-trivial
side benefit, allows recovery.conf parameters to be unquoted.
Dimitri Fontaine, with review and cleanup by Alvaro Herrera, Itagaki
Takahiro, and me.
location read from backup label file can be found: wasShutdown was set
incorrectly when a backup label file was found.
Jeff Davis, with a little tweaking by me.
rather than 0/0, so that we can safely use 0/0 as an invalid value. This is a
more future-proof fix for the corner-case bug in streaming replication that
was fixed yesterday. We had a similar corner-case bug with log/seg 0/0 back in
February as well. Avoiding 0/0 as a valid value should prevent bugs like that
in the future. Per Tom Lane's idea.
Back-patch to 9.0. Since this only affects bootstrapping, it makes no
difference to existing installations. We don't need to worry about the
bug in existing installations, because if you've managed to get past the
initial base backup already, you won't hit the bug in the future either.
streaming replication. We used log/seg 0/0 to indicate that no WAL segments
have been removed since startup, but 0/0 is a valid value for the very first
WAL segment after initdb. To make that disambiguous, store
(latest removed WAL segment + 1) in the global variable.
Per report from Matt Chesler, also reproduced by Greg Smith.
that WAL file containing the checkpoint redo-location can be found. This
avoids making the cluster irrecoverable if the redo location is in an earlie
WAL file than the checkpoint record.
Report, analysis and patch by Jeff Davis, with small changes by me.
new WAL arrives via streaming replication. This reduces the latency, and
also allows us to use a longer polling interval, which is good for energy
efficiency.
We still need to poll to check for the appearance of a trigger file, but
the interval is now 5 seconds (instead of 100ms), like when waiting for
a new WAL segment to appear in WAL archive.
Transaction aborts now record their LSN to avoid corner case
behaviour in SR/HS, hence change of name of variables and functions.
As pointed out by Fujii Masao. Cosmetic changes only.
idea from the start since the variable is only meant to track commit/abort
events. This patch reverts the logic around the variable to what it was in
8.4, except that the value is now kept in shared memory rather than a static
variable, so that it can be reported correctly by CreateRestartPoint (which is
executed in the bgwriter).
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
master. Otherwise a subsequent crash could cause the master to lose WAL that
has already been applied on the slave, resulting in the slave being out of
sync and soon corrupt. Per recent discussion and an example from Robert Haas.
Fujii Masao
and retry. If the record is genuinely corrupt in the master database,
there's little hope of recovering, but it's better than simply retrying
to apply the corrupt WAL record in a tight loop without even trying to
retransmit it, which is what we used to do.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
checkpoint_timeout to trigger restartpoints. We used to deliberately only
do time-based restartpoints, because if checkpoint_segments is small we
would spend time doing restartpoints more often than really necessary.
But now that restartpoints are done in bgwriter, they're not as
disruptive as they used to be. Secondly, because streaming replication
stores the streamed WAL files in pg_xlog, we want to clean it up more
often to avoid running out of disk space when checkpoint_timeout is large
and checkpoint_segments small.
Patch by Fujii Masao, with some minor changes by me.
the current one. Not doing this would leave the walwriter with a handle to a
deleted file if there was nothing for it to do for a long period of time,
preventing the file from being completely removed.
Reported by Tollef Fog Heen, and thanks to Heikki for some hand-holding with
the patch.
of requirements and documentation on LogStandbySnapshot(). Fixes
two minor bugs reported by Tom Lane that would lead to an incorrect
snapshot after transaction wraparound. Also fix two other problems
discovered that would give incorrect snapshots in certain cases.
ProcArrayApplyRecoveryInfo() substantially rewritten. Some minor
refactoring of xact_redo_apply() and ExpireTreeKnownAssignedTransactionIds().
minRecoveryPoint in control file when replaying a parameter change record,
to ensure that we don't allow hot standby on WAL generated without
wal_level='hot_standby' after a standby restart.
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
confusion with streaming-replication settings. Also, change its default
value to "off", because of concern about executing new and poorly-tested
code during ordinary non-replicating operation. Per discussion.
In passing do some minor editing of related documentation.
archival or hot standby should be WAL-logged, instead of deducing that from
other options like archive_mode. This replaces recovery_connections GUC in
the primary, where it now has no effect, but it's still used in the standby
to enable/disable hot standby.
Remove the WAL-logging of "unlogged operations", like creating an index
without WAL-logging and fsyncing it at the end. Instead, we keep a copy of
the wal_mode setting and the settings that affect how much shared memory a
hot standby server needs to track master transactions (max_connections,
max_prepared_xacts, max_locks_per_xact) in pg_control. Whenever the settings
change, at server restart, write a WAL record noting the new settings and
update pg_control. This allows us to notice the change in those settings in
the standby at the right moment, they used to be included in checkpoint
records, but that meant that a changed value was not reflected in the
standby until the first checkpoint after the change.
Bump PG_CONTROL_VERSION and XLOG_PAGE_MAGIC. Whack XLOG_PAGE_MAGIC back to
the sequence it used to follow, before hot standby and subsequent patches
changed it to 0x9003.
in WAL recovery when it sees the shutdown checkpoint record. It's more
user-friendly to find out about it at that point than at the end of
recovery, and you're not left wondering why your hot standby server never
opens up for read-only connections.
of parameters. Fix bug report by Robert Haas that error message and
hint was incorrect if wrong mode parameters specified on master.
Internal changes only. Proposals for parameter simplification on
master/primary still under way.
Also, make the name of the GUC and the name of the backing variable match.
Alnong the way, clean up a couple of slight typographical errors in the
related docs.
Now doesn't report it is waiting until it actually is waiting,
plus message doesn't appear until at least 5 seconds wait, so
we avoid reporting the wait before we've given the archiver
a reasonable time to wake up and archive the file we just
created earlier in the function.
Also add new unconditional message to confirm safe completion.
Now a normal, healthy execution does not report waiting at
all, just safe completion.
through normal backends. Makes code clearer also, since we
avoid various Assert()s. Performance of snapshots taken
during recovery no longer depends upon number of read-only
backends.
after actually removing one, so that if we can't remove segments because
WAL archiving is lagging behind, we don't unnecessarily forbid streaming
the old not-yet-archived segments that are still perfectly valid. Per
suggestion from Fujii Masao.
doesn't take into account how far the WAL senders are. This way a hung
WAL sender doesn't prevent old WAL segments from being recycled/removed
in the primary, ultimately causing the disk to fill up. Instead add
standby_keep_segments setting to control how many old WAL segments are
kept in the primary. This also makes it more reliable to use streaming
replication without WAL archiving, assuming that you set
standby_keep_segments high enough.
recovery. We might want to relax this in the future, but ThisTimeLineID
isn't currently correct in backends during recovery, so the filename
returned was wrong.
Heikki Linnakangas
Peter Eisentraut
Simon Riggs
Robert Haas
Tom Lane
Bruce Momjian
Magnus Hagander
Alvaro Herrera
Itagaki Takahiro