This code evidently intended to treat backslash as an escape character
within double-quoted substrings, but it was sufficiently confused that
cases like ..."foo\\"... did not work right: the second backslash
managed to quote the double-quote after it, despite being quoted itself.
Rewrite to get that right, while preserving the existing behavior
outside double-quoted substrings, which is that backslash isn't special
except in the combination \".
Comparing to Oracle, it seems that their version of to_char() for
timestamps allows literal alphanumerics only within double quotes, while
non-alphanumerics are allowed outside quotes; backslashes aren't special
anywhere; there is no way at all to emit a literal double quote.
(Bizarrely, their to_char() for numbers is different; it doesn't allow
literal text at all AFAICT.) The fact that they don't treat backslash
as special justifies our existing behavior for backslash outside double
quotes. I considered making backslash inside double quotes act the same
way (ie, special only if before "), which in a green field would be a
more consistent behavior. But that would likely break more existing SQL
code than what this patch does.
Add some test cases illustrating this behavior. (Only the last new
case actually changes behavior in this commit.)
Little of this behavior was documented, either, so fix that.
Discussion: https://postgr.es/m/3626.1510949486@sss.pgh.pa.us
Non-data template patterns would consume characters whether or not those
characters were what the pattern expected, for example
SELECT TO_NUMBER('1234', '9,999');
produced 134 because the '2' got eaten by the comma pattern. This seems
undesirable, not least because it doesn't happen in Oracle. For the ','
and 'G' template patterns, we can fix this by consuming characters only
if they match what the pattern would output. For non-data patterns such
as 'L' and 'TH', it seems impractical to tighten things up to the point of
consuming only exact matches to what the pattern would output; but we can
improve matters quite a lot by redefining the behavior as "consume only
characters that aren't digits, signs, decimal point, or comma".
Also, fix it so that the behavior is to consume the number of *characters*
the pattern would output, not the number of *bytes*. The old coding would
do surprising things with non-ASCII currency symbols, for example. (It
would be good to apply that rule for literal text as well, but this commit
only fixes it for non-data patterns.)
Oliver Ford, reviewed by Thomas Munro and Nathan Wagner, and whacked around
a bit more by me
Discussion: https://postgr.es/m/CAGMVOdvpbMqPf9XWNzOwBpzJfErkydr_fEGhmuDGa015z97mwg@mail.gmail.com
It appears that proargmodes should always be set for variadic
functions, but satifies_hash_partition had it as NULL. In addition to
fixing the problem, add a regression test to guard against future
mistakes of this type.
If a PARAM_EXEC parameter is used below a Gather (Merge) but the InitPlan
that computes it is attached to or above the Gather (Merge), force the
value to be computed before starting parallelism and pass it down to all
workers. This allows us to use parallelism in cases where it previously
would have had to be rejected as unsafe. We do - in this case - lose the
optimization that the value is only computed if it's actually used. An
alternative strategy would be to have the first worker that needs the value
compute it, but one downside of that approach is that we'd then need to
select a parallel-safe path to compute the parameter value; it couldn't for
example contain a Gather (Merge) node. At some point in the future, we
might want to consider both approaches.
Independent of that consideration, there is a great deal more work that
could be done to make more kinds of PARAM_EXEC parameters parallel-safe.
This infrastructure could be used to allow a Gather (Merge) on the inner
side of a nested loop (although that's not a very appealing plan) and
cases where the InitPlan is attached below the Gather (Merge) could be
addressed as well using various techniques. But this is a good start.
Amit Kapila, reviewed and revised by me. Reviewing and testing from
Kuntal Ghosh, Haribabu Kommi, and Tushar Ahuja.
Discussion: http://postgr.es/m/CAA4eK1LV0Y1AUV4cUCdC+sYOx0Z0-8NAJ2Pd9=UKsbQ5Sr7+JQ@mail.gmail.com
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
This will need to be back-patched, along with the preparatory commit
91aec93e6. But let's see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
When a value contained an XML declaration naming some other encoding,
this function interpreted UTF8 bytes as the named encoding, yielding
mojibake. xml_parse() already has similar logic. This would be
necessary but not sufficient for non-UTF8 databases, so preserve
behavior there until the xpath facility can support such databases
comprehensively. Back-patch to 9.3 (all supported versions).
Pavel Stehule and Noah Misch
Discussion: https://postgr.es/m/CAFj8pRC-dM=tT=QkGi+Achkm+gwPmjyOayGuUfXVumCxkDgYWg@mail.gmail.com
Hash partitioning is useful when you want to partition a growing data
set evenly. This can be useful to keep table sizes reasonable, which
makes maintenance operations such as VACUUM faster, or to enable
partition-wise join.
At present, we still depend on constraint exclusion for partitioning
pruning, and the shape of the partition constraints for hash
partitioning is such that that doesn't work. Work is underway to fix
that, which should both improve performance and make partitioning
pruning work with hash partitioning.
Amul Sul, reviewed and tested by Dilip Kumar, Ashutosh Bapat, Yugo
Nagata, Rajkumar Raghuwanshi, Jesper Pedersen, and by me. A few
final tweaks also by me.
Discussion: http://postgr.es/m/CAAJ_b96fhpJAP=ALbETmeLk1Uni_GFZD938zgenhF49qgDTjaQ@mail.gmail.com
While it's generally unwise to give permissions on these functions to
anyone but a superuser, we've been moving away from hard-wired permission
checks inside functions in favor of using the SQL permission system to
control access. Bring lo_import() and lo_export() into compliance with
that approach.
In particular, this removes the manual configuration option
ALLOW_DANGEROUS_LO_FUNCTIONS. That dates back to 1999 (commit 4cd4a54c8);
it's unlikely anyone has used it in many years. Moreover, if you really
want such behavior, now you can get it with GRANT ... TO PUBLIC instead.
Michael Paquier
Discussion: https://postgr.es/m/CAB7nPqRHmNOYbETnc_2EjsuzSM00Z+BWKv9sy6tnvSd5gWT_JA@mail.gmail.com
The problem reported as CVE-2017-15098 was already resolved in HEAD by
commit 37a795a60, but let's add the relevant test cases anyway.
Michael Paquier and Tom Lane, per a report from David Rowley.
Security: CVE-2017-15098
The update path of an INSERT ... ON CONFLICT DO UPDATE requires SELECT
permission on the columns of the arbiter index, but it failed to check
for that in the case of an arbiter specified by constraint name.
In addition, for a table with row level security enabled, it failed to
check updated rows against the table's SELECT policies when the update
path was taken (regardless of how the arbiter index was specified).
Backpatch to 9.5 where ON CONFLICT DO UPDATE and RLS were introduced.
Security: CVE-2017-15099
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5facca introduced the
shared temp-install.
If we don't have to return any columns from heap tuples, and there's
no need to recheck qual conditions, and the heap page is all-visible,
then we can skip fetching the heap page altogether.
Skip prefetching pages too, when possible, on the assumption that the
recheck flag will remain the same from one page to the next. While that
assumption is hardly bulletproof, it seems like a good bet most of the
time, and better than prefetching pages we don't need.
This commit installs the executor infrastructure, but doesn't change
any planner cost estimates, thus possibly causing bitmap scans to
not be chosen in cases where this change renders them the best choice.
I (tgl) am not entirely convinced that we need to account for this
behavior in the planner, because I think typically the bitmap scan would
get chosen anyway if it's the best bet. In any case the submitted patch
took way too many shortcuts, resulting in too many clearly-bad choices,
to be committable.
Alexander Kuzmenkov, reviewed by Alexey Chernyshov, and whacked around
rather heavily by me.
Discussion: https://postgr.es/m/239a8955-c0fc-f506-026d-c837e86c827b@postgrespro.ru
It's possible for dropping a column, or altering its type, to require
changes in domain CHECK constraint expressions; but the code was
previously only expecting to find dependent table CHECK constraints.
Make the necessary adjustments.
This is a fairly old oversight, but it's a lot easier to encounter
the problem in the context of domains over composite types than it
was before. Given the lack of field complaints, I'm not going to
bother with a back-patch, though I'd be willing to reconsider that
decision if someone does complain.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/30656.1509128130@sss.pgh.pa.us
Without this fix, dropping a role can sometimes result in parallel
query failures in sessions that have used "SET ROLE" to assume the
dropped role, even if that setting isn't active any more.
Report by Pavan Deolasee. Patch by Amit Kapila, reviewed by me.
Discussion: http://postgr.es/m/CABOikdOomRcZsLsLK+Z+qENM1zxyaWnAvFh3MJZzZnnKiF+REg@mail.gmail.com
expandRTE() supposed that an RTE_SUBQUERY subquery must have exactly
as many non-junk tlist items as the RTE has column aliases for it.
This was true at the time the code was written, and is still true so
far as parse analysis is concerned --- but when the function is used
during planning, the subquery might have appeared through insertion
of a view that now has more columns than it did when the outer query
was parsed. This results in a core dump if, for instance, we have
to expand a whole-row Var that references the subquery.
To avoid crashing, we can either stop expanding the RTE when we run
out of aliases, or invent new aliases for the added columns. While
the latter might be more useful, the former is consistent with what
expandRTE() does for composite-returning functions in the RTE_FUNCTION
case, so it seems like we'd better do it that way.
Per bug #14876 from Samuel Horwitz. This has been busted since commit
ff1ea2173 allowed views to acquire more columns, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/20171026184035.1471.82810@wrigleys.postgresql.org
This was always intended to work, but due to an oversight in
max_parallel_hazard_walker, it didn't. In testing, we missed the
fact that it was only working for custom plans, where the parameter
value has been substituted for the parameter itself early enough
that everything worked. In a generic plan, the Param node survives
and must be treated as parallel-safe. SerializeParamList provides
for the transmission of parameter values to workers.
Amit Kapila with help from Kuntal Ghosh. Some changes by me.
Discussion: http://postgr.es/m/CAA4eK1+_BuZrmVCeua5Eqnm4Co9DAXdM5HPAOE2J19ePbR912Q@mail.gmail.com
On closer investigation, commits f3ea3e3e8 et al were a few bricks
shy of a load. What we need is not so much to lock down the result
type of a FieldSelect, as to lock down the existence of the column
it's trying to extract. Otherwise, we can break it by dropping that
column. The dependency on the result type is then held indirectly
through the column, and doesn't need to be recorded explicitly.
Out of paranoia, I left in the code to record a dependency on the
result type, but it's used only if we can't identify the pg_class OID
for the column. That shouldn't ever happen right now, AFAICS, but
it seems possible that in future the input node could be marked as
being of type RECORD rather than some specific composite type.
Likewise for FieldStore.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/22571.1509064146@sss.pgh.pa.us
This is the last major omission in our domains feature: you can now
make a domain over anything that's not a pseudotype.
The major complication from an implementation standpoint is that places
that might be creating tuples of a domain type now need to be prepared
to apply domain_check(). It seems better that unprepared code fail
with an error like "<type> is not composite" than that it silently fail
to apply domain constraints. Therefore, relevant infrastructure like
get_func_result_type() and lookup_rowtype_tupdesc() has been adjusted
to treat domain-over-composite as a distinct case that unprepared code
won't recognize, rather than just transparently treating it the same
as plain composite. This isn't a 100% solution to the possibility of
overlooked domain checks, but it catches most places.
In passing, improve typcache.c's support for domains (it can now cache
the identity of a domain's base type), and rewrite the argument handling
logic in jsonfuncs.c's populate_record[set]_worker to reduce duplicative
per-call lookups.
I believe this is code-complete so far as the core and contrib code go.
The PLs need varying amounts of work, which will be tackled in followup
patches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
Previously, we skipped using search_indexed_tlist_for_sortgroupref()
if the tlist expression being sought in the child plan node was merely
a Var. This is purely an optimization, based on the theory that
search_indexed_tlist_for_var() is faster, and one copy of a Var should
be as good as another. However, the GROUPING SETS patch broke the
latter assumption: grouping columns containing the "same" Var can
sometimes have different outputs, as shown in the test case added here.
So do it the hard way whenever a ressortgroupref marking exists.
(If this seems like a bottleneck, we could imagine building a tlist index
data structure for ressortgroupref values, as we do for Vars. But I'll
let that idea go until there's some evidence it's worthwhile.)
Back-patch to 9.6. The problem also exists in 9.5 where GROUPING SETS
came in, but this patch is insufficient to resolve the problem in 9.5:
there is some obscure dependency on the upper-planner-pathification
work that happened in 9.6. Given that this is such a weird corner case,
and no end users have complained about it, it doesn't seem worth the work
to develop a fix for 9.5.
Patch by me, per a report from Heikki Linnakangas. (This does not fix
Heikki's original complaint, just the follow-on one.)
Discussion: https://postgr.es/m/aefc657e-edb2-64d5-6df1-a0828f6e9104@iki.fi
json_build_object and json_build_array and the jsonb equivalents did not
correctly process explicit VARIADIC arguments. They are modified to use
the new extract_variadic_args() utility function which abstracts away
the details of the call method.
Michael Paquier, reviewed by Tom Lane and Dmitry Dolgov.
Backpatch to 9.5 for the jsonb fixes and 9.4 for the json fixes, as
that's where they originated.
Although joinaliasvars lists coming out of the parser are quite simple,
those lists can contain arbitrarily complex expressions after subquery
pullup. We do not perform expression preprocessing on them, meaning that
expressions in those lists will not meet the expectations of later phases
of the planner (for example, that they do not contain SubLinks). This had
been thought pretty harmless, since we don't intentionally touch those
lists in later phases --- but Andreas Seltenreich found a case in which
adjust_appendrel_attrs() could recurse into a joinaliasvars list and then
die on its assertion that it never sees a SubLink. We considered a couple
of localized fixes to prevent that specific case from looking at the
joinaliasvars lists, but really this seems like a generic hazard for all
expression processing in the planner. Therefore, probably the best answer
is to delete the joinaliasvars lists from the parsetree at the end of
expression preprocessing, so that there are no reachable expressions that
haven't been through preprocessing.
The case Andreas found seems to be harmless in non-Assert builds, and so
far there are no field reports suggesting that there are user-visible
effects in other cases. I considered back-patching this anyway, but
it turns out that Andreas' test doesn't fail at all in 9.4-9.6, because
in those versions adjust_appendrel_attrs contains code (added in commit
842faa714 and removed again in commit 215b43cdc) to process SubLinks
rather than complain about them. Barring discovery of another path by
which unprocessed joinaliasvars lists can cause trouble, the most
prudent compromise seems to be to patch this into v10 but not further.
Patch by me, with thanks to Amit Langote for initial investigation
and review.
Discussion: https://postgr.es/m/87r2tvt9f1.fsf@ansel.ydns.eu
Like the similar logic for arrays and records, it's necessary to examine
the range's subtype to decide whether the range type can support hashing.
We can omit checking the subtype for btree-defined operations, though,
since range subtypes are required to have those operations. (Possibly
that simplification for btree cases led us to overlook that it does
not apply for hash cases.)
This is only an issue if the subtype lacks hash support, which is not
true of any built-in range type, but it's easy to demonstrate a problem
with a range type over, eg, money: you can get a "could not identify
a hash function" failure when the planner is misled into thinking that
hash join or aggregation would work.
This was born broken, so back-patch to all supported branches.
This is preparation for a future patch to extensively change how
reloptions work.
Author: Nikolay Shaplov
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/2615372.orqtEn8VGB@x200m
setTargetTable threw an error if the proposed target RangeVar's relname
matched any visible CTE or ENR. This breaks backwards compatibility in
the CTE case, since pre-v10 we never looked for a CTE here at all, so that
CTE names did not mask regular tables. It does seem like a good idea to
throw an error for the ENR case, though, thus causing ENRs to mask tables
for this purpose; ENRs are new in v10 so we're not breaking existing code,
and we may someday want to allow them to be the targets of DML.
To fix that, replace use of getRTEForSpecialRelationTypes, which was
overkill anyway, with use of scanNameSpaceForENR.
A second problem was that the check neglected to verify null schemaname,
so that a CTE or ENR could incorrectly be thought to match a qualified
RangeVar. That happened because getRTEForSpecialRelationTypes relied
on its caller to have checked for null schemaname. Even though the one
remaining caller got it right, this is obviously bug-prone, so move
the check inside getRTEForSpecialRelationTypes.
Also, revert commit 18ce3a4ab's extremely poorly thought out decision to
add a NULL return case to parserOpenTable --- without either documenting
that or adjusting any of the callers to check for it. The current bug
seems to have arisen in part due to working around that bad idea.
In passing, remove the one-line shim functions transformCTEReference and
transformENRReference --- they don't seem to be adding any clarity or
functionality.
Per report from Hugo Mercier (via Julien Rouhaud). Back-patch to v10
where the bug was introduced.
Thomas Munro, with minor editing by me
Discussion: https://postgr.es/m/CAOBaU_YdPVH+PTtiKSSLOiiW3mVDYsnNUekK+XPbHXiP=wrFLA@mail.gmail.com
The built-in OSAs all share the same transition function, so they can
share transition state as long as the final functions cooperate to not
do the sort step more than once. To avoid running the tuplesort object
in randomAccess mode unnecessarily, add a bit of infrastructure to
nodeAgg.c to let the aggregate functions find out whether the transition
state is actually being shared or not.
This doesn't work for the hypothetical aggregates, since those inject
a hypothetical row that isn't traceable to the shared input state.
So they remain marked aggfinalmodify = 'w'.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
An aggregate's input expression(s) are not supposed to be evaluated
at all for a row where its FILTER test fails ... but commit 8ed3f11bb
overlooked that requirement. Reshuffle so that aggregates having a
filter clause evaluate their arguments separately from those without.
This still gets the benefit of doing only one ExecProject in the
common case of multiple Aggrefs, none of which have filters.
While at it, arrange for filter clauses to be included in the common
ExecProject evaluation, thus perhaps buying a little bit even when
there are filters.
Back-patch to v10 where the bug was introduced.
Discussion: https://postgr.es/m/30065.1508161354@sss.pgh.pa.us
Up to now, there's been hard-wired assumptions that normal aggregates'
final functions never modify their transition states, while ordered-set
aggregates' final functions always do. This has always been a bit
limiting, and in particular it's getting in the way of improving the
built-in ordered-set aggregates to allow merging of transition states.
Therefore, let's introduce catalog and CREATE AGGREGATE infrastructure
that lets the finalfn's behavior be declared explicitly.
There are now three possibilities for the finalfn behavior: it's purely
read-only, it trashes the transition state irrecoverably, or it changes
the state in such a way that no more transfn calls are possible but the
state can still be passed to other, compatible finalfns. There are no
examples of this third case today, but we'll shortly make the built-in
OSAs act like that.
This change allows user-defined aggregates to explicitly disclaim support
for use as window functions, and/or to prevent transition state merging,
if their implementations cannot handle that. While it was previously
possible to handle the window case with a run-time error check, there was
not any way to prevent transition state merging, which in retrospect is
something commit 804163bc2 should have provided for. But better late
than never.
In passing, split out pg_aggregate.c's extern function declarations into
a new header file pg_aggregate_fn.h, similarly to what we've done for
some other catalog headers, so that pg_aggregate.h itself can be safe
for frontend files to include. This lets pg_dump use the symbolic
names for relevant constants.
Discussion: https://postgr.es/m/4834.1507849699@sss.pgh.pa.us
A few command line options accepted by pg_regress were not being output
by help(), including --help itself. Add that one, as well as --version
and --bindir, and the corresponding short options for the first two.
We could consider this for backpatching, but it did not seem worthwhile
and no one else advocated for it, so apply only to master for now.
Author: Joe Conway
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/dd519469-06d7-2662-83ef-c926f6c4f0f1%40joeconway.com
This ought to work, but the built-in OSAs are not capable of coping,
because their final-functions destructively modify their transition
state (specifically, the contained tuplesort object). That was fine
when those functions were written, but commit 804163bc2 moved the
goalposts without telling orderedsetaggs.c.
We should fix the built-in OSAs to support this, but it will take
a little work, especially if we don't want to sacrifice performance
in the normal non-shared-state case. Given that it took a year after
9.6 release for anyone to notice this bug, we should not prioritize
sharable-state over nonsharable-state performance. And a proper fix
is likely to be more complicated than we'd want to back-patch, too.
Therefore, let's just put in this stop-gap patch to prevent nodeAgg.c
from choosing to use shared state for OSAs. We can revert it in HEAD
when we get a better fix.
Report from Lukas Eder, diagnosis by me, patch by David Rowley.
Back-patch to 9.6 where the problem was introduced.
Discussion: https://postgr.es/m/CAB4ELO5RZhOamuT9Xsf72ozbenDLLXZKSk07FiSVsuJNZB861A@mail.gmail.com
If the operator is a strict btree equality operator, and X isn't volatile,
then the clause must yield true for any non-null value of X, or null if X
is null. At top level of a WHERE clause, we can ignore the distinction
between false and null results, so it's valid to simplify the clause to
"X IS NOT NULL". This is a useful improvement mainly because we'll get
a far better selectivity estimate in most cases.
Because such cases seldom arise in well-written queries, it is unappetizing
to expend a lot of planner cycles looking for them ... but it turns out
that there's a place we can shoehorn this in practically for free, because
equivclass.c already has to detect and reject candidate equivalences of the
form X = X. That doesn't catch every place that it would be valid to
simplify to X IS NOT NULL, but it catches the typical case. Working harder
doesn't seem justified.
Patch by me, reviewed by Petr Jelinek
Discussion: https://postgr.es/m/CAMjNa7cC4X9YR-vAJS-jSYCajhRDvJQnN7m2sLH1wLh-_Z2bsw@mail.gmail.com
The previous coding here trashed the line buffer as it scanned it,
making it impossible to print the source line in subsequent error
messages. With a few save/restore/strdup pushups we can improve
that situation.
In passing, move the free'ing of the various strings that are collected
while processing one set of tests down to the bottom of the loop.
That's simpler, less surprising, and should make valgrind less unhappy
about the strings that were previously leaked by the last iteration.
We have a very old rule that parallel_schedule should have no more
than twenty tests in any one parallel group, so as to provide a
bound on the number of concurrently running processes needed to
pass the tests. But people keep forgetting the rule, so let's add
a few lines of code to check it.
Discussion: https://postgr.es/m/a37e9c57-22d4-1b82-1270-4501cd2e984e@2ndquadrant.com
The partition_join test was added to a parallel group that was already
at the maximum of 20 concurrent tests. The hash_func test wasn't
added to serial_schedule at all. The identity and partition_join tests
were added to serial_schedule with the aid of a dartboard, rather than
maintaining consistency with parallel_schedule.
There are proposals afoot to make these sorts of errors harder to make,
but in the meantime let's fix the ones already in place.
Discussion: https://postgr.es/m/a37e9c57-22d4-1b82-1270-4501cd2e984e@2ndquadrant.com
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
If the table attached as a partition is itself partitioned, individual
partitions might have constraints strong enough to skip scanning the
table even if the table actually attached does not. This is pretty
cheap to check, and possibly a big win if it works out.
Amit Langote, with test case changes by me.
Discussion: http://postgr.es/m/1f08b844-0078-aa8d-452e-7af3bf77d05f@lab.ntt.co.jp
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
A lot of semi-internal code just prints out numeric SPI error codes,
which is not very helpful. We already have an API function to convert
the codes to a string, so let's make more use of that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Not much to say about this; does what it says on the tin.
However, formerly, if there was a column list then the ANALYZE action was
implied; now it must be specified, or you get an error. This is because
it would otherwise be a bit unclear what the user meant if some tables
have column lists and some don't.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada, with some
editorialization by me
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
Allowing arrays with a domain type as their element type was left un-done
in the original domain patch, but not for any very good reason. This
omission leads to such surprising results as array_agg() not working on
a domain column, because the parser can't identify a suitable output type
for the polymorphic aggregate.
In order to fix this, first clean up the APIs of coerce_to_domain() and
some internal functions in parse_coerce.c so that we consistently pass
around a CoercionContext along with CoercionForm. Previously, we sometimes
passed an "isExplicit" boolean flag instead, which is strictly less
information; and coerce_to_domain() didn't even get that, but instead had
to reverse-engineer isExplicit from CoercionForm. That's contrary to the
documentation in primnodes.h that says that CoercionForm only affects
display and not semantics. I don't think this change fixes any live bugs,
but it makes things more consistent. The main reason for doing it though
is that now build_coercion_expression() receives ccontext, which it needs
in order to be able to recursively invoke coerce_to_target_type().
Next, reimplement ArrayCoerceExpr so that the node does not directly know
any details of what has to be done to the individual array elements while
performing the array coercion. Instead, the per-element processing is
represented by a sub-expression whose input is a source array element and
whose output is a target array element. This simplifies life in
parse_coerce.c, because it can build that sub-expression by a recursive
invocation of coerce_to_target_type(). The executor now handles the
per-element processing as a compiled expression instead of hard-wired code.
The main advantage of this is that we can use a single ArrayCoerceExpr to
handle as many as three successive steps per element: base type conversion,
typmod coercion, and domain constraint checking. The old code used two
stacked ArrayCoerceExprs to handle type + typmod coercion, which was pretty
inefficient, and adding yet another array deconstruction to do domain
constraint checking seemed very unappetizing.
In the case where we just need a single, very simple coercion function,
doing this straightforwardly leads to a noticeable increase in the
per-array-element runtime cost. Hence, add an additional shortcut evalfunc
in execExprInterp.c that skips unnecessary overhead for that specific form
of expression. The runtime speed of simple cases is within 1% or so of
where it was before, while cases that previously required two levels of
array processing are significantly faster.
Finally, create an implicit array type for every domain type, as we do for
base types, enums, etc. Everything except the array-coercion case seems
to just work without further effort.
Tom Lane, reviewed by Andrew Dunstan
Discussion: https://postgr.es/m/9852.1499791473@sss.pgh.pa.us
For \d sequencename, the psql code just did SELECT * FROM sequencename
to get the information to display, but this does not contain much
interesting information anymore in PostgreSQL 10, because the metadata
has been moved to a separate system catalog.
This patch creates a newly designed sequence display that is not merely
an extension of the general relation/table display as it was previously.
Example:
PostgreSQL 9.6:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
---------------+---------+---------------------
sequence_name | name | foobar
last_value | bigint | 1
start_value | bigint | 1
increment_by | bigint | 1
max_value | bigint | 9223372036854775807
min_value | bigint | 1
cache_value | bigint | 1
log_cnt | bigint | 0
is_cycled | boolean | f
is_called | boolean | f
PostgreSQL 10 before this change:
=> \d foobar
Sequence "public.foobar"
Column | Type | Value
------------+---------+-------
last_value | bigint | 1
log_cnt | bigint | 0
is_called | boolean | f
New:
=> \d foobar
Sequence "public.foobar"
Type | Start | Minimum | Maximum | Increment | Cycles? | Cache
--------+-------+---------+---------------------+-----------+---------+-------
bigint | 1 | 1 | 9223372036854775807 | 1 | no | 1
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
At the time replacement_sort_tuples was introduced, there were still
cases where replacement selection sort noticeably outperformed using
quicksort even for the first run. However, those cases seem to have
evaporated as a result of further improvements made since that time
(and perhaps also advances in CPU technology). So remove replacement
selection and the controlling GUC entirely. This makes tuplesort.c
noticeably simpler and probably paves the way for further
optimizations someone might want to do later.
Peter Geoghegan, with review and testing by Tomas Vondra and me.
Discussion: https://postgr.es/m/CAH2-WzmmNjG_K0R9nqYwMq3zjyJJK+hCbiZYNGhAy-Zyjs64GQ@mail.gmail.com
float8_numeric() and float4_numeric() failed to consider the possibility
that the input is an IEEE infinity. The results depended on the
platform-specific behavior of sprintf(): on most platforms you'd get
something like
ERROR: invalid input syntax for type numeric: "inf"
but at least on Windows it's possible for the conversion to succeed and
deliver a finite value (typically 1), due to a nonstandard output format
from sprintf and lack of syntax error checking in these functions.
Since our numeric type lacks the concept of infinity, a suitable conversion
is impossible; the best thing to do is throw an explicit error before
letting sprintf do its thing.
While at it, let's use snprintf not sprintf. Overrunning the buffer
should be impossible if sprintf does what it's supposed to, but this
is cheap insurance against a stack smash if it doesn't.
Problem reported by Taiki Kondo. Patch by me based on fix suggestion
from KaiGai Kohei. Back-patch to all supported branches.
Discussion: https://postgr.es/m/12A9442FBAE80D4E8953883E0B84E088C8C7A2@BPXM01GP.gisp.nec.co.jp
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
The blacklist mechanism added by the preceding commit directly fixes
most of the practical cases that the same-transaction test was meant
to cover. What remains is use-cases like
begin;
create type e as enum('x');
alter type e add value 'y';
-- use 'y' somehow
commit;
However, because the same-transaction test is heuristic, it fails on
small variants of that, such as renaming the type or changing its
owner. Rather than try to explain the behavior to users, let's
remove it and just have a rule that the newly added value can't be
used before being committed, full stop. Perhaps later it will be
worth the implementation effort and overhead to have a more accurate
test for type-was-created-in-this-transaction. We'll wait for some
field experience with v10 before deciding to do that.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
If construct_array() or construct_md_array() were given a dimension of
zero, they'd produce an array that contains no elements but has positive
dimension. This violates a general expectation that empty arrays should
have ndims = 0; in particular, while arrays like this print as empty,
they don't compare equal to other empty arrays.
Up to now we've expected callers to avoid making such calls and instead
be careful to call construct_empty_array() if there would be no elements.
But this has always been an easily missed case, and we've repeatedly had to
fix callers to do it right. In bug #14826, Erwin Brandstetter pointed out
yet another such oversight, in ts_lexize(); and a bit of examination of
other call sites found at least two more with similar issues. So let's
fix the problem centrally and permanently by changing these two functions
to construct a proper zero-D empty array whenever the array would be empty.
This renders a few explicit calls of construct_empty_array() redundant,
but the only such place I found that really seemed worth changing was in
ExecEvalArrayExpr().
Although this fixes some very old bugs, no back-patch: the problem is
pretty minor and the risk of changing behavior seems to outweigh the
benefit in stable branches.
Discussion: https://postgr.es/m/20170923125723.1448.39412@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20570.1506198383@sss.pgh.pa.us
"\if :{?variable_name}" will be translated to "\if TRUE" if the variable
exists and "\if FALSE" otherwise. Thus it will be possible to execute code
conditionally on the existence of the variable, regardless of its value.
Fabien Coelho, with some review by Robins Tharakan and some light text
editing by me.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1708260835520.3627@lancre
Previously, the code didn't think about this case and would just try to
analyze such a column twice. That would fail at the point of inserting
the second version of the pg_statistic row, with obscure error messsages
like "duplicate key value violates unique constraint" or "tuple already
updated by self", depending on context and PG version. We could allow
the case by ignoring duplicate column specifications, but it seems better
to reject it explicitly.
The bogus error messages seem like arguably a bug, so back-patch to
all supported versions.
Nathan Bossart, per a report from Michael Paquier, and whacked
around a bit by me.
Discussion: https://postgr.es/m/E061A8E3-5E3D-494D-94F0-E8A9B312BBFC@amazon.com
The preceding patch allowed us to remove useless GiST support functions.
This patch actually does that for all the no-op cases in the core GiST
code. This buys us whatever performance gain is to be had, and more
importantly exercises the preceding patch.
There remain no-op functions in the contrib GiST opclasses, but those
will take more work to remove.
Discussion: https://postgr.es/m/CAJEAwVELVx9gYscpE=Be6iJxvdW5unZ_LkcAaVNSeOwvdwtD=A@mail.gmail.com
Commit 0f79440fb introduced mechanism to keep AFTER STATEMENT triggers
from firing more than once per statement, which was formerly possible
if more than one FK enforcement action had to be applied to a given
table. Add a similar mechanism for BEFORE STATEMENT triggers, so that
we don't have the unexpected situation of firing BEFORE STATEMENT
triggers more often than AFTER STATEMENT.
As with the previous patch, back-patch to v10.
Discussion: https://postgr.es/m/22315.1505584992@sss.pgh.pa.us
The standard says that all changes of the same kind (insert, update, or
delete) caused in one table by a single SQL statement should be reported
in a single transition table; and by that, they mean to include foreign key
enforcement actions cascading from the statement's direct effects. It's
also reasonable to conclude that if the standard had wCTEs, they would say
that effects of wCTEs applying to the same table as each other or the outer
statement should be merged into one transition table. We weren't doing it
like that.
Hence, arrange to merge tuples from multiple update actions into a single
transition table as much as we can. There is a problem, which is that if
the firing of FK enforcement triggers and after-row triggers with
transition tables is interspersed, we might need to report more tuples
after some triggers have already seen the transition table. It seems like
a bad idea for the transition table to be mutable between trigger calls.
There's no good way around this without a major redesign of the FK logic,
so for now, resolve it by opening a new transition table each time this
happens.
Also, ensure that AFTER STATEMENT triggers fire just once per statement,
or once per transition table when we're forced to make more than one.
Previous versions of Postgres have allowed each FK enforcement query
to cause an additional firing of the AFTER STATEMENT triggers for the
referencing table, but that's certainly not per spec. (We're still
doing multiple firings of BEFORE STATEMENT triggers, though; is that
something worth changing?)
Also, forbid using transition tables with column-specific UPDATE triggers.
The spec requires such transition tables to show only the tuples for which
the UPDATE trigger would have fired, which means maintaining multiple
transition tables or else somehow filtering the contents at readout.
Maybe someday we'll bother to support that option, but it looks like a
lot of trouble for a marginal feature.
The transition tables are now managed by the AfterTriggers data structures,
rather than being directly the responsibility of ModifyTable nodes. This
removes a subtransaction-lifespan memory leak introduced by my previous
band-aid patch 3c4359521.
In passing, refactor the AfterTriggers data structures to reduce the
management overhead for them, by using arrays of structs rather than
several parallel arrays for per-query-level and per-subtransaction state.
I failed to resist the temptation to do some copy-editing on the SGML
docs about triggers, above and beyond merely documenting the effects
of this patch.
Back-patch to v10, because we don't want the semantics of transition
tables to change post-release.
Patch by me, with help and review from Thomas Munro.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
Flattening the partitioning hierarchy at this stage makes various
desirable optimizations difficult. The original use case for this
patch was partition-wise join, which wants to match up the partitions
in one partitioning hierarchy with those in another such hierarchy.
However, it now seems that it will also be useful in making partition
pruning work using the PartitionDesc rather than constraint exclusion,
because with a flattened expansion, we have no easy way to figure out
which PartitionDescs apply to which leaf tables in a multi-level
partition hierarchy.
As it turns out, we end up creating both rte->inh and !rte->inh RTEs
for each intermediate partitioned table, just as we previously did for
the root table. This seems unnecessary since the partitioned tables
have no storage and are not scanned. We might want to go back and
rejigger things so that no partitioned tables (including the parent)
need !rte->inh RTEs, but that seems to require some adjustments not
related to the core purpose of this patch.
Ashutosh Bapat, reviewed by me and by Amit Langote. Some final
adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRd=1venqLL7oGU=C1dEkuvk2DJgvF+7uKbnPHaum1mvHQ@mail.gmail.com
Test queries added by commit 69835bc89 are giving unexpected results
on some smaller buildfarm critters. I think probably the seqscan
logic is kicking in to cause the scans to not start at the beginning
of the table. Add ORDER BY to make them be indexscans instead.
Per buildfarm member chipmunk.
This patch adds ERROR, SQLSTATE, and ROW_COUNT, which are updated after
every query, as well as LAST_ERROR_MESSAGE and LAST_ERROR_SQLSTATE,
which are updated only when a query fails. The expected usage of these
is for scripting.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704042158020.12290@lancre
AFTER triggers using transition tables crashed if they were fired due
to a foreign key ON CASCADE update. This is because ExecEndModifyTable
flushes the transition tables, on the assumption that any trigger that
could need them was already fired during ExecutorFinish. Normally
that's true, because we don't allow transition-table-using triggers
to be deferred. However, foreign key CASCADE updates force any
triggers on the referencing table to be deferred to the outer query
level, by means of the EXEC_FLAG_SKIP_TRIGGERS flag. I don't recall
all the details of why it's like that and am pretty loath to redesign
it right now. Instead, just teach ExecEndModifyTable to skip destroying
the TransitionCaptureState when that flag is set. This will allow the
transition table data to survive until end of the current subtransaction.
This isn't a terribly satisfactory solution, because (1) we might be
leaking the transition tables for much longer than really necessary,
and (2) as things stand, an AFTER STATEMENT trigger will fire once per
RI updating query, ie once per row updated or deleted in the referenced
table. I suspect that is not per SQL spec. But redesigning this is a
research project that we're certainly not going to get done for v10.
So let's go with this hackish answer for now.
In passing, tweak AfterTriggerSaveEvent to not save the transition_capture
pointer into the event record for a deferrable trigger. This is not
necessary to fix the current bug, but it avoids letting dangling pointers
to long-gone transition tables persist in the trigger event queue. That's
at least a safety feature. It might also allow merging shared trigger
states in more cases than before.
I added a regression test that demonstrates the crash on unpatched code,
and also exposes the behavior of firing the AFTER STATEMENT triggers
once per row update.
Per bug #14808 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
Issuing a savepoint-related command in a Query message that contains
multiple SQL statements led to a FATAL exit with a complaint about
"unexpected state STARTED". This is a shortcoming of commit 4f896dac1,
which attempted to prevent such misbehaviors in multi-statement strings;
its quick hack of marking the individual statements as "not top-level"
does the wrong thing in this case, and isn't a very accurate description
of the situation anyway.
To fix, let's introduce into xact.c an explicit model of what happens for
multi-statement Query strings. This is an "implicit transaction block
in progress" state, which for many purposes works like the normal
TBLOCK_INPROGRESS state --- in particular, IsTransactionBlock returns true,
causing the desired result that PreventTransactionChain will throw error.
But in case of error abort it works like TBLOCK_STARTED, allowing the
transaction to be cancelled without need for an explicit ROLLBACK command.
Commit 4f896dac1 is reverted in toto, so that we go back to treating the
individual statements as "top level". We could have left it as-is, but
this allows sharpening the error message for PreventTransactionChain
calls inside functions.
Except for getting a normal error instead of a FATAL exit for savepoint
commands, this patch should result in no user-visible behavioral change
(other than that one error message rewording). There are some things
we might want to do in the line of changing the appearance or wording of
error and warning messages around this behavior, which would be much
simpler to do now that it's an explicitly modeled state. But I haven't
done them here.
Although this fixes a long-standing bug, no backpatch. The consequences
of the bug don't seem severe enough to justify the risk that this commit
itself creates some new issue.
Patch by me, but it owes something to previous investigation by
Takayuki Tsunakawa, who also reported the bug in the first place.
Also thanks to Michael Paquier for reviewing.
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F6BE40D@G01JPEXMBYT05
Index columns are referenced by ordinal number rather than name, e.g.
CREATE INDEX coord_idx ON measured (x, y, (z + t));
ALTER INDEX coord_idx ALTER COLUMN 3 SET STATISTICS 1000;
Incompatibility note for release notes:
\d+ for indexes now also displays Stats Target
Authors: Alexander Korotkov, with contribution by Adrien NAYRAT
Review: Adrien NAYRAT, Simon Riggs
Wordsmith: Simon Riggs
This command acts somewhat like \g, but instead of executing the query
buffer, it merely prints a description of the columns that the query
result would have. (Of course, this still requires parsing the query;
if parse analysis fails, you get an error anyway.) We accomplish this
using an unnamed prepared statement, which should be invisible to psql
users.
Pavel Stehule, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/CAFj8pRBhYVvO34FU=EKb=nAF5t3b++krKt1FneCmR0kuF5m-QA@mail.gmail.com
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Robert Haas and Amul Sul
Discussion: http://postgr.es/m/CA+Tgmoafx2yoJuhCQQOL5CocEi-w_uG4S2xT0EtgiJnPGcHW3g@mail.gmail.com
Previously, we expanded the inheritance hierarchy in the order in
which find_all_inheritors had locked the tables, but that turns out
to block quite a bit of useful optimization. For example, a
partition-wise join can't count on two tables with matching bounds
to get expanded in the same order.
Where possible, this change results in expanding partitioned tables in
*bound* order. Bound order isn't well-defined for a list-partitioned
table with a null-accepting partition or for a list-partitioned table
where the bounds for a single partition are interleaved with other
partitions. However, when expansion in bound order is possible, it
opens up further opportunities for optimization, such as
strength-reducing MergeAppend to Append when the expansion order
matches the desired sort order.
Patch by me, with cosmetic revisions by Ashutosh Bapat.
Discussion: http://postgr.es/m/CA+TgmoZrKj7kEzcMSum3aXV4eyvvbh9WD=c6m=002WMheDyE3A@mail.gmail.com
PG_MODULE_MAGIC has been around since 8.2, with 8.1 long since in EOL,
so remove the mention of #ifdef guards for compiling against pre-8.2
sources from the documentation.
Author: Daniel Gustafsson <daniel@yesql.se>
Up until now, when parallel query was used, no details about the
sort method or space used by the workers were available; details
were shown only for any sorting done by the leader. Fix that.
Commit 1177ab1dab forced the test case
added by commit 1f6d515a67 to run
without parallelism; now that we have this infrastructure, allow
that again, with a little tweaking to make it pass with and without
force_parallel_mode.
Robert Haas and Tom Lane
Discussion: http://postgr.es/m/CA+Tgmoa2VBZW6S8AAXfhpHczb=Rf6RqQ2br+zJvEgwJ0uoD_tQ@mail.gmail.com
If we only need, say, 10 tuples in total, then we certainly don't need
more than 10 tuples from any single process. Pushing down the limit
lets workers exit early when possible. For Gather Merge, there is
an additional benefit: a Sort immediately below the Gather Merge can
be done as a bounded sort if there is an applicable limit.
Robert Haas and Tom Lane
Discussion: http://postgr.es/m/CA+TgmoYa3QKKrLj5rX7UvGqhH73G1Li4B-EKxrmASaca2tFu9Q@mail.gmail.com
Fix thinko in commit 8be8510cf: it's okay to have dbid == 0 in normal
(non-pin) entries in pg_shdepend, because global objects such as
databases are entered that way. The test would pass so long as it
was run in a cluster containing no databases/tablespaces owned by,
or granted to, roles other than the bootstrap superuser. That's the
expected situation for "make check", but for "make installcheck", not
so much.
Reported by Ryan Murphy.
Discussion: https://postgr.es/m/CAHeEsBc6EQe0mxGBKDXAwJbntgfvoAd5MQC-5362SmC3Tng_6g@mail.gmail.com
Test that blessed records can be transferred through a TupleQueue and
correctly decoded by another backend. While touching the file, make
sure that force_parallel_mode settings only cover relevant tests.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20170823054644.efuzftxjpfi6wwqs%40alap3.anarazel.de
The test case added by commit 1f6d515a6 fails on buildfarm members that
have force_parallel_mode turned on, because we currently don't report sort
performance details from worker processes back to the master. To fix that,
just make the test table be temp rather than regular; that's a good idea
anyway to forestall any possible interference from auto-analyze.
(The restriction that workers can't access temp tables might go away
someday, but almost certainly not before the other thing gets fixed.)
Also, improve the test so that we retain as much as possible of the
EXPLAIN ANALYZE output. This aids debugging failures, and might also
expose problems that the preceding version masked.
Discussion: http://postgr.es/m/CADE5jYLuugnEEUsyW6Q_4mZFYTxHxaVCQmGAsF0yiY8ZDggi-w@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
That code patch was good as far as it went, but the associated test case
has exposed fundamental brain damage in the parallel scan mechanism,
which is going to take nontrivial work to correct. In the interests of
getting the buildfarm back to green so that unrelated work can proceed,
let's temporarily remove the test case.
Perusal of the code coverage report shows that the existing regression
test cases for LIMIT/OFFSET don't exercise the nodeLimit code paths
involving backwards scan, empty results, or null values of LIMIT/OFFSET.
Improve the coverage.
Perusal of the code coverage report shows that the existing regression
test cases for INTERSECT and EXCEPT seemingly all prefer the SETOP_HASHED
implementation. Add some test cases in which we force use of the
SETOP_SORTED mode.
The previous message didn't mention the name of the table or the
bounds. Put the table name in the primary error message and the
bounds in the detail message.
Amit Langote, changed slightly by me. Suggestions on the exac
phrasing from Tom Lane, David G. Johnston, and Dean Rasheed.
Discussion: http://postgr.es/m/CA+Tgmoae6bpwVa-1BMaVcwvCCeOoJ5B9Q9-RHWo-1gJxfPBZ5Q@mail.gmail.com
find_composite_type_dependencies correctly found columns that are of
the specified type, and columns that are of arrays of that type, but
not columns that are domains or ranges over the given type, its array
type, etc. The most general way to handle this seems to be to assume
that any type that is directly dependent on the specified type can be
treated as a container type, and processed recursively (allowing us
to handle nested cases such as ranges over domains over arrays ...).
Since a type's array type already has such a dependency, we can drop
the existing special case for the array type.
The very similar logic in get_rels_with_domain was likewise a few
bricks shy of a load, as it supposed that a directly dependent type
could *only* be a sub-domain. This is already wrong for ranges over
domains, and it'll someday be wrong for arrays over domains.
Add test cases illustrating the problems, and back-patch to all
supported branches.
Discussion: https://postgr.es/m/15268.1502309024@sss.pgh.pa.us
lo_put() surely should require UPDATE permission, the same as lowrite(),
but it failed to check for that, as reported by Chapman Flack. Oversight
in commit c50b7c09d; backpatch to 9.4 where that was introduced.
Tom Lane and Michael Paquier
Security: CVE-2017-7548
Commit 3eefc51053 claimed to make
pg_user_mappings enforce the qualifications user_mapping_options had
been enforcing, but its removal of a longstanding restriction left them
distinct when the current user is the subject of a mapping yet has no
server privileges. user_mapping_options emits no rows for such a
mapping, but pg_user_mappings includes full umoptions. Change
pg_user_mappings to show null for umoptions. Back-patch to 9.2, like
the above commit.
Reviewed by Tom Lane. Reported by Jeff Janes.
Security: CVE-2017-7547
Some authentication methods allowed it, others did not. In the client-side,
libpq does not even try to authenticate with an empty password, which makes
using empty passwords hazardous: an administrator might think that an
account with an empty password cannot be used to log in, because psql
doesn't allow it, and not realize that a different client would in fact
allow it. To clear that confusion and to be be consistent, disallow empty
passwords in all authentication methods.
All the authentication methods that used plaintext authentication over the
wire, except for BSD authentication, already checked that the password
received from the user was not empty. To avoid forgetting it in the future
again, move the check to the recv_password_packet function. That only
forbids using an empty password with plaintext authentication, however.
MD5 and SCRAM need a different fix:
* In stable branches, check that the MD5 hash stored for the user does not
not correspond to an empty string. This adds some overhead to MD5
authentication, because the server needs to compute an extra MD5 hash, but
it is not noticeable in practice.
* In HEAD, modify CREATE and ALTER ROLE to clear the password if an empty
string, or a password hash that corresponds to an empty string, is
specified. The user-visible behavior is the same as in the stable branches,
the user cannot log in, but it seems better to stop the empty password from
entering the system in the first place. Secondly, it is fairly expensive to
check that a SCRAM hash doesn't correspond to an empty string, because
computing a SCRAM hash is much more expensive than an MD5 hash by design,
so better avoid doing that on every authentication.
We could clear the password on CREATE/ALTER ROLE also in stable branches,
but we would still need to check at authentication time, because even if we
prevent empty passwords from being stored in pg_authid, there might be
existing ones there already.
Reported by Jeroen van der Ham, Ben de Graaff and Jelte Fennema.
Security: CVE-2017-7546
If you do ALTER COLUMN SET NOT NULL against an inheritance parent table,
it will recurse to mark all the child columns as NOT NULL as well. This
is necessary for consistency: if the column is labeled NOT NULL then
reading it should never produce nulls.
However, that didn't happen in the case where ALTER ... ADD PRIMARY KEY
marks a target column NOT NULL that wasn't before. That was questionable
from the beginning, and now Tushar Ahuja points out that it can lead to
dump/restore failures in some cases. So let's make that case recurse too.
Although this is meant to fix a bug, it's enough of a behavioral change
that I'm pretty hesitant to back-patch, especially in view of the lack
of similar field complaints. It doesn't seem to be too late to put it
into v10 though.
Michael Paquier, editorialized on slightly by me
Discussion: https://postgr.es/m/b8794d6a-38f0-9d7c-ad4b-e85adf860fc9@enterprisedb.com
ALTER USER ... SET did not support all the syntax variants of ALTER ROLE
... SET. Fix that, and to avoid further deviations of this kind, unify
many the grammar rules for ROLE/USER/GROUP commands.
Reported-by: Pavel Golub <pavel@microolap.com>
Otherwise, partitioned tables with RETURNING expressions or subject
to a WITH CHECK OPTION do not work properly.
Amit Langote, reviewed by Amit Khandekar and Etsuro Fujita. A few
comment changes by me.
Discussion: http://postgr.es/m/9a39df80-871e-6212-0684-f93c83be4097@lab.ntt.co.jp
The buildfarm is still showing at least three distinct behaviors for
a bad locale name in CREATE COLLATION. Although this test was helpful
for getting the error reporting code into some usable shape, it doesn't
seem worth carrying multiple expected-files in order to support the
test in perpetuity. So pull it back out.
Discussion: https://postgr.es/m/CAKKotZS-wcDcofXDCH=sidiuajE+nqHn2CGjLLX78anyDmi3gQ@mail.gmail.com
DROP CASCADE doesn't currently promise to visit dependent objects in
a fixed order, so when the regression tests use it, we typically need
to suppress the details of which objects get dropped in order to have
predictable test output. Traditionally we've done that by setting
client_min_messages higher than NOTICE, but there's a better way:
we can "\set VERBOSITY terse" in psql. That suppresses the DETAIL
message with the object list, but we still get the basic notice telling
how many objects were dropped. So at least the test case can verify
that the expected number of objects were dropped.
The VERBOSITY method was already in use in a few places, but run
around and use it wherever it makes sense.
Discussion: https://postgr.es/m/10766.1501608885@sss.pgh.pa.us
We were just printing errno, which is certainly not gonna work on
Windows. Now, it's not entirely clear from Microsoft's documentation
whether _create_locale() adheres to standard Windows error reporting
conventions, but let's assume it does and try to map the GetLastError
result to an errno. If this turns out not to work, probably the best
thing to do will be to assume the error is always ENOENT on Windows.
This is a longstanding bug, but given the lack of previous field
complaints, I'm not excited about back-patching it.
Per report from Murtuza Zabuawala.
Discussion: https://postgr.es/m/CAKKotZS-wcDcofXDCH=sidiuajE+nqHn2CGjLLX78anyDmi3gQ@mail.gmail.com
Most of our collations code has special handling for the locale names
"C" and "POSIX", allowing those collations to be used whether or not
the system libraries think those locale names are valid, or indeed
whether said libraries even have any locale support. But we missed
handling things that way in CREATE COLLATION. This meant you couldn't
clone the C/POSIX collations, nor explicitly define a new collation
using those locale names, unless the libraries allow it. That's pretty
pointless, as well as being a violation of pg_newlocale_from_collation's
API specification.
The practical effect of this change is quite limited: it allows creating
such collations even on platforms that don't HAVE_LOCALE_T, and it allows
making "POSIX" collation objects on Windows, which before this would only
let you make "C" collation objects. Hence, even though this is a bug fix
IMO, it doesn't seem worth the trouble to back-patch.
In passing, suppress the DROP CASCADE detail messages at the end of the
collation regression test. I'm surprised we've never been bit by
message ordering issues there.
Per report from Murtuza Zabuawala.
Discussion: https://postgr.es/m/CAKKotZS-wcDcofXDCH=sidiuajE+nqHn2CGjLLX78anyDmi3gQ@mail.gmail.com
Various cases involving renaming of view columns are handled by having
make_viewdef pass down the view's current relation tupledesc to
get_query_def, which then takes care to use the column names from the
tupledesc for the output column names of the SELECT. For some reason
though, we'd missed teaching make_ruledef to do similarly when it is
printing an ON SELECT rule, even though this is exactly the same case.
The results from pg_get_ruledef would then be different and arguably wrong.
In particular, this breaks pre-v10 versions of pg_dump, which in some
situations would define views by means of emitting a CREATE RULE ... ON
SELECT command. Third-party tools might not be happy either.
In passing, clean up some crufty code in make_viewdef; we'd apparently
modernized the equivalent code in make_ruledef somewhere along the way,
and missed this copy.
Per report from Gilles Darold. Back-patch to all supported versions.
Discussion: https://postgr.es/m/ec05659a-40ff-4510-fc45-ca9d965d0838@dalibo.com
I believe this changed as a consequence of commit 54baa4813: trying to
clone the "C" collation now produces a true clone with collencoding -1,
hence the error message if it's duplicate no longer specifies an encoding.
Per buildfarm member crake, which apparently hadn't been running this
test for the last few weeks.
The order of partitions listed by \d+ is in general locale-dependent.
Rename the partitions in the test added by d363d42bb9 to force them to
be listed in a consistent order.
Previously, UNBOUNDED meant no lower bound when used in the FROM list,
and no upper bound when used in the TO list, which was OK for
single-column range partitioning, but problematic with multiple
columns. For example, an upper bound of (10.0, UNBOUNDED) would not be
collocated with a lower bound of (10.0, UNBOUNDED), thus making it
difficult or impossible to define contiguous multi-column range
partitions in some cases.
Fix this by using MINVALUE and MAXVALUE instead of UNBOUNDED to
represent a partition column that is unbounded below or above
respectively. This syntax removes any ambiguity, and ensures that if
one partition's lower bound equals another partition's upper bound,
then the partitions are contiguous.
Also drop the constraint prohibiting finite values after an unbounded
column, and just document the fact that any values after MINVALUE or
MAXVALUE are ignored. Previously it was necessary to repeat UNBOUNDED
multiple times, which was needlessly verbose.
Note: Forces a post-PG 10 beta2 initdb.
Report by Amul Sul, original patch by Amit Langote with some
additional hacking by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Normally, a JoinExpr would have empty "quals" only if it came from CROSS
JOIN syntax. However, it's possible to get to this state by specifying
NATURAL JOIN between two tables with no common column names, and there
might be other ways too. The code previously printed no ON clause if
"quals" was empty; that's right for CROSS JOIN but syntactically invalid
if it's some type of outer join. Fix by printing ON TRUE in that case.
This got broken by commit 2ffa740be, which stopped using NATURAL JOIN
syntax in ruleutils output due to its brittleness in the face of
column renamings. Back-patch to 9.3 where that commit appeared.
Per report from Tushar Ahuja.
Discussion: https://postgr.es/m/98b283cd-6dda-5d3f-f8ac-87db8c76a3da@enterprisedb.com
Before, we always used a dummy value of 1, but that's not right when
the partitioned table being modified is inside of a WITH clause
rather than part of the main query.
Amit Langote, reported and reviewd by Etsuro Fujita, with a comment
change by me.
Discussion: http://postgr.es/m/ee12f648-8907-77b5-afc0-2980bcb0aa37@lab.ntt.co.jp
It seems pretty confusing to have tests named both largeobject and
large_object. The latter is of very recent vintage (commit ff992c074),
so get rid of it in favor of merging into the former.
Also, enable the LO comment test that was added by commit 70ad7ed4e,
since the later commit added the then-missing pg_upgrade functionality.
The large_object.sql test case is almost completely redundant with that,
but not quite: it seems like creating a user-defined LO with an OID in
the system range might be an interesting case for pg_upgrade, so let's
keep it.
Like the earlier patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/18665.1500306372@sss.pgh.pa.us
The grammar will only accept something syntactically similar to a function
call in a function-in-FROM expression. However, there are various ways
to input something that ruleutils.c won't deparse that way, potentially
leading to a view or rule that fails dump/reload. Fix by inserting a
dummy CAST around anything that isn't going to deparse as a function
(which is one of the ways to get something like that in there in the
first place).
In HEAD, also make use of the infrastructure added by this to avoid
emitting unnecessary parentheses in CREATE INDEX deparsing. I did
not change that in back branches, thinking that people might find it
to be unexpected/unnecessary behavioral change.
In HEAD, also fix incorrect logic for when to add extra parens to
partition key expressions. Somebody apparently thought they could
get away with simpler logic than pg_get_indexdef_worker has, but
they were wrong --- a counterexample is PARTITION BY LIST ((a[1])).
Ignoring the prettyprint flag for partition expressions isn't exactly
a nice solution anyway.
This has been broken all along, so back-patch to all supported branches.
Discussion: https://postgr.es/m/10477.1499970459@sss.pgh.pa.us
Further investigation shows that ruleutils isn't quite up to speed either
for cases where we have a domain-over-array: it needs to be prepared to
look past a CoerceToDomain at the top level of field and element
assignments, else it decompiles them incorrectly. Potentially this would
result in failure to dump/reload a rule, if it looked like the one in the
new test case. (I also added a test for EXPLAIN; that output isn't broken,
but clearly we need more test coverage here.)
Like commit b1cb32fb6, this bug is reachable in cases we already support,
so back-patch all the way.
We allow INSERT and UPDATE commands to assign to the same column more than
once, as long as the assignments are to subfields or elements rather than
the whole column. However, this failed when the target column was a domain
over array rather than plain array. Fix by teaching process_matched_tle()
to look through CoerceToDomain nodes, and add relevant test cases.
Also add a group of test cases exercising domains over array of composite.
It's doubtless accidental that CREATE DOMAIN allows this case while not
allowing straight domain over composite; but it does, so we'd better make
sure we don't break it. (I could not find any documentation mentioning
either side of that, so no doc changes.)
It's been like this for a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/4206.1499798337@sss.pgh.pa.us
Commit c46c0e5202 failed to pass the
TransitionCaptureState object to ExecARInsertTriggers() in the case
where it's using heap_multi_insert and there are indexes. Repair.
Thomas Munro, from a report by David Fetter
Discussion: https://postgr.es/m/20170708084213.GA14720%40fetter.org
The previous logic, whilst not actually wrong, was overly complex and
involved doing two binary searches, where only one was really
necessary. This simplifies that logic and improves the comments.
One visible change is that if the new partition overlaps multiple
existing partitions, the error message now always reports the overlap
with the first existing partition (the one with the lowest
bounds). The old code would sometimes report the clash with the first
partition and sometimes with the last one.
Original patch idea from Amit Langote, substantially rewritten by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
We now disallow having triggers with both transition tables and ON
INSERT OR UPDATE (which was a PG extension to the spec anyway),
because in this case it's not at all clear how the transition tables
should work for an INSERT ... ON CONFLICT query. Separate ON INSERT
and ON UPDATE triggers with transition tables are allowed, and the
transition tables for these reflect only the inserted and only the
updated tuples respectively.
Patch by Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D11KHQ0JmETJQihSvhZB5mUZL2xrqHeXbCeLhDiqQ39%3Dw%40mail.gmail.com
check_agg_arguments_walker threw an error upon seeing a SRF or window
function, but that is too aggressive: if the function is within a
sub-select then it's perfectly fine. I broke the SRF case in commit
0436f6bde by copying the logic for window functions ... but that was
broken too, and had been since commit eaccfded9.
Repair both cases in HEAD, and the window function case back to 9.3.
9.2 gets this right.
It's essential that initdb.c's setup_depend() scan each system catalog
that could contain objects that need to have "p" (pin) entries in pg_depend
or pg_shdepend. Forgetting to add that, either when a catalog is first
invented or when it first acquires DATA() entries, is an obvious bug
hazard. We can detect such omissions at reasonable cost by probing every
OID-containing system catalog to see whether the lowest-numbered OID in it
is pinned. If so, the catalog must have been properly accounted for in
setup_depend(). If the lowest OID is above FirstNormalObjectId then the
catalog must have been empty at the end of initdb, so it doesn't matter.
There are a small number of catalogs whose first entry is made later in
initdb than setup_depend(), resulting in nonempty expected output of the
test, but these can be manually inspected to see that they are OK. Any
future mistake of this ilk will manifest as a new entry in the test's
output.
Since pg_conversion is already in the test's output, add it to the set of
catalogs scanned by setup_depend(). That has no effect today (hence, no
catversion bump here) but it will protect us if we ever do add pin-worthy
conversions.
This test is very much like the catalog sanity checks embodied in
opr_sanity.sql and type_sanity.sql, but testing pg_depend doesn't seem to
fit naturally into either of those scripts' charters. Hence, invent a new
test script misc_sanity.sql, which can be a home for this as well as tests
on any other catalogs we might want in future.
Discussion: https://postgr.es/m/8068.1498155068@sss.pgh.pa.us
I misplaced the IF NOT EXISTS clause in commit 7b504eb282, before the
word STATISTICS. Put it where it belongs.
Patch written independently by Amit Langote and myself. I adopted his
submitted test case with a slight edit also.
Reported-by: Bruno Wolff III
Discussion: https://postgr.es/m/20170621004237.GB8337@wolff.to
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Currently, there are no built-in functions that are SECURITY DEFINER.
But we just found an instance where one was mistakenly marked that way,
so it seems prudent to add a test about it. If we ever grow some
functions that are intentionally SECURITY DEFINER, we can alter the
expected output of this test, or adjust the query to filter out functions
for which it's okay.
Per suggestion from Robert Haas.
Discussion: https://postgr.es/m/CA+TgmoYXg7McY33+jbWmG=rS-HNUur0S6W8Q8kVNFf7epFimVA@mail.gmail.com
David Rowley found that the "use the smallest per-column selectivity"
heuristic applied in some cases by get_foreign_key_join_selectivity()
was badly off if the FK columns are independent, producing estimates
much worse than we got before that code was added in 9.6.
One case where that heuristic was used was for LEFT and FULL outer joins
with the referenced rel on the outside of the join. But we should not
really need to special-case those here. eqjoinsel() never has had such a
special case; the correction is applied by calc_joinrel_size_estimate()
instead. Let's just estimate such cases like inner joins and rely on that
later adjustment. (I think there was something of a thinko here, in that
the comments seem to be thinking about the selectivity as defined for
semi/anti joins; but that shouldn't apply to left/full joins.) Add a
regression test exercising such a case to show that this is sane in
at least some cases.
The other case where we used that heuristic was for SEMI/ANTI outer joins,
either if the referenced rel was on the outside, or if it was on the inside
but was part of a join within the RHS. In either case, the FK doesn't give
us a lot of traction towards estimating the selectivity. To ensure that
we don't have regressions from what happened before 9.6, let's punt by
ignoring the FK in such cases and applying the traditional selectivity
calculation. (We might be able to improve on that later, but for now
I just want to be sure it's not worse than 9.5.)
Report and patch by David Rowley, simplified a bit by me. Back-patch
to 9.6 where this code was added.
Discussion: https://postgr.es/m/CAKJS1f8NO8oCDcxrteohG6O72uU1saEVT9qX=R8pENr5QWerXw@mail.gmail.com
When a new base type is created using the old-style procedure of first
creating the input/output functions with "opaque" in place of the base
type, the "opaque" argument/return type is changed to the final base type,
on CREATE TYPE. However, we did not create a pg_depend record when doing
that, so the functions were left not depending on the type.
Fixes bug #14706, reported by Karen Huddleston.
Discussion: https://www.postgresql.org/message-id/20170614232259.1424.82774@wrigleys.postgresql.org
Show "All tables" property in \dRp and \dRp+. Don't list tables for
such publications in \dRp+, since it's redundant and the list could be
very long.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Jeff Janes <jeff.janes@gmail.com>
In a CHECK clause, a null result means true, whereas in a WHERE clause
it means false. predtest.c provided different functions depending on
which set of semantics applied to the predicate being proved, but had
no option to control what a null meant in the clauses provided as
axioms. Add one.
Use that in the partitioning code when figuring out whether the
validation scan on a new partition can be skipped. Rip out the
old logic that attempted (not very successfully) to compensate
for the absence of the necessary support in predtest.c.
Ashutosh Bapat and Robert Haas, reviewed by Amit Langote and
incorporating feedback from Tom Lane.
Discussion: http://postgr.es/m/CAFjFpReT_kq_uwU_B8aWDxR7jNGE=P0iELycdq5oupi=xSQTOw@mail.gmail.com
expression_returns_set() used to short-circuit its recursion upon
seeing certain node types, such as DistinctExpr, that it knew the
executor did not support set-valued arguments for. That was never
inherent, though, just a reflection of laziness in execQual.c.
With the new implementation of SRFs there is no reason to think
that any scalar-valued expression node could not have a set-valued
subexpression, except for AggRefs and WindowFuncs where we know there
is a parser check rejecting it. And indeed, the shortcut causes
unexpected failures for cases such as a SRF underneath DistinctExpr,
because the planner stops looking for SRFs too soon.
Discussion: https://postgr.es/m/5259.1497044025@sss.pgh.pa.us
Table partitioning, introduced in commit f0e44751d7, added a new
relkind - RELKIND_PARTITIONED_TABLE. Update a couple of places in
PL/pgSQL to handle it. Specifically plpgsql_parse_cwordtype() and
build_row_from_class() needed updating in order to make table%ROWTYPE
and table.col%TYPE work for partitioned tables.
Dean Rasheed, reviewed by Amit Langote.
Discussion: https://postgr.es/m/CAEZATCUnNOKN8sLML9jUzxecALWpEXK3a3W7y0PgFR4%2Buhgc%3Dg%40mail.gmail.com
When we reimplemented SRFs in commit 69f4b9c85, our initial choice was
to allow the behavior to vary from historical practice in cases where a
SRF call appeared within a conditional-execution construct (currently,
only CASE or COALESCE). But that was controversial to begin with, and
subsequent discussion has resulted in a consensus that it's better to
throw an error instead of executing the query differently from before,
so long as we can provide a reasonably clear error message and a way to
rewrite the query.
Hence, add a parser mechanism to allow detection of such cases during
parse analysis. The mechanism just requires storing, in the ParseState,
a pointer to the set-returning FuncExpr or OpExpr most recently emitted
by parse analysis. Then the parsing functions for CASE and COALESCE can
detect the presence of a SRF in their arguments by noting whether this
pointer changes while analyzing their arguments. Furthermore, if it does,
it provides a suitable error cursor location for the complaint. (This
means that if there's more than one SRF in the arguments, the error will
point at the last one to be analyzed not the first. While connoisseurs of
parsing behavior might find that odd, it's unlikely the average user would
ever notice.)
While at it, we can also provide more specific error messages than before
about some pre-existing restrictions, such as no-SRFs-within-aggregates.
Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM
construct would need to return a set. We've never supported that, but the
restriction is depended on in more subtle ways now, so it seems wise to
detect it at the start.
Also, provide some documentation about how to rewrite a SRF-within-CASE
query using a custom wrapper SRF.
It turns out that the information_schema.user_mapping_options view
contained an instance of exactly the behavior we're now forbidding; but
rewriting it makes it more clear and safer too.
initdb forced because of user_mapping_options change.
Patch by me, with error message suggestions from Alvaro Herrera and
Andres Freund, pursuant to a complaint from Regina Obe.
Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us
Table partitioning, introduced in commit f0e44751d7, added a new
relkind - RELKIND_PARTITIONED_TABLE. Update relation_is_updatable() to
handle it. Specifically, partitioned tables and simple views built on
top of them are updatable.
This affects the SQL-callable functions pg_relation_is_updatable() and
pg_column_is_updatable(), and the views information_schema.views and
information_schema.columns.
Dean Rasheed, reviewed by Ashutosh Bapat.
Discussion: https://postgr.es/m/CAEZATCXnbiFkMXgF4Ez1pmM2c-tS1z33bSq7OGbw7QQhHov%2B6Q%40mail.gmail.com
ExecInitModifyTable() thought there was a plan per partition, but no,
there's only one. The problem had escaped detection so far because there
would only be visible misbehavior if there were a SubPlan (not an InitPlan)
in the quals being duplicated for each partition. However, valgrind
detected a bogus memory access in test cases added by commit 4f7a95be2,
and investigation of that led to discovery of the bug. The additional
test case added here crashes without the patch.
Patch by Amit Langote, test case by me.
Discussion: https://postgr.es/m/10974.1497227727@sss.pgh.pa.us
The new partitioned table capability added a new relkind, namely
RELKIND_PARTITIONED_TABLE. Update fireRIRrules() to apply RLS
policies on RELKIND_PARTITIONED_TABLE as it does RELKIND_RELATION.
In addition, add RLS regression test coverage for partitioned tables.
Issue raised by Fakhroutdinov Evgenievich and patch by Mike Palmiotto.
Regression test editorializing by me.
Discussion: https://postgr.es/m/flat/20170601065959.1486.69906@wrigleys.postgresql.org