included by everything that includes bufmgr.h --- it's supposed to be
internals, after all, not part of the API! This fixes the conflict
against FreeBSD headers reported by Rosenman, by making it unnecessary
for s_lock.h to be included by plperl.c.
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
that search loops only have to scan that far and not through all maxBackends
entries. This eliminates a performance penalty for setting maxBackends
much higher than the average number of active backends. Also, eliminate
no-longer-used 'backend tag' concept. Remove setting of environment
variables at backend start (except for CYR_RECODE), since none of them
are being examined by the backend any longer.
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
as full as possible, seems better to use a tuple size around BLCKSZ/4
so that less space is wasted when a LO tuple is updated. Also, this
lets us use a logical page size that's an exact power of two, avoiding
partial-page writes when client is sending us stuff in power-of-2
buffer chunks.
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
from bufmgr - it would be nice to have separate hash in smgr
for node <--> fd mappings, but for the moment it's easy to
add new hash to relcache.
Fixed small bug in xlog.c:ReadRecord.
* Makefile: Add more standard targets. Improve shell redirection in GNU
make detection.
* src/backend/access/transam/rmgr.c: Fix incorrect(?) C.
* src/backend/libpq/pqcomm.c (StreamConnection): Work around accept() bug.
* src/include/port/unixware.h: ...with help from here.
* src/backend/nodes/print.c (plannode_type): Remove some "break"s after
"return"s.
* src/backend/tcop/dest.c (DestToFunction): ditto.
* src/backend/nodes/readfuncs.c: Add proper prototypes.
* src/backend/utils/adt/numutils.c (pg_atoi): Cope specially with strtol()
setting EINVAL. This saves us from creating an extra set of regression test
output for the affected systems.
* src/include/storage/s_lock.h (tas): Correct prototype.
* src/interfaces/libpq/fe-connect.c (parseServiceInfo): Don't use variable
as dimension in array definition.
* src/makefiles/Makefile.unixware: Add support for GCC.
* src/template/unixware: same here
* src/test/regress/expected/abstime-solaris-1947.out: Adjust whitespace.
* src/test/regress/expected/horology-solaris-1947.out: Part of this file
was evidently missing.
* src/test/regress/pg_regress.sh: Fix shell. mkdir -p returns non-zero if
the directory exists.
* src/test/regress/resultmap: Add entries for Unixware.
> Regression tests opr_sanity and sanity_check are now failing.
Um, Bruce, I've said several times that I didn't think Perchine's large
object changes should be applied until someone had actually reviewed
them.
I tested it restoring my database with > 100000 BLOBS, and dumping it out.
But unfortunatly I can not restore it back due to problems in pg_dump.
--
Sincerely Yours,
Denis Perchine
> > For a while I though it might be because we are using an alpha TAS in
> > the spinlock rather than the old semaphore. I replaced our spinlock
> > with the standard one and it made no difference. We have been running
> > with our spinlock implementation for nearly 2 months on a production
> > database now without a hitch, so I think it is ok. Did I ever submit
> > any patches for the Alpha spinlock?
>
> Not that I recall. We did get some advice from some Alpha gurus at DEC
> who seemed to think the existing TAS code is OK. What was it that you
> felt needed to be improved?
The current code uses semaphores, which has the advantage that it works
well even on multi-processor machines, but the disadvantage that it is not
the fastest way possible. Writing a spinlock on Alpha for SMP machines is
very difficult, as you need to deal with memory barriers. A real mess. But
then one of the people at Compaq pointed out to us that there is a
ready-made routine on Alpha. We implemented it with the two patches below.
I ran tests with lots of parallel back-ends and got around a 10% speed
increase. I include the two patches. Perhaps some of the other people
running Tru64 can have a look at these as well.
Cheers,
Adriaan Joubert
> this is patch v 0.4 to support transactions with BLOBs.
> All BLOBs are in one table. You need to make initdb.
>
> --
> Sincerely Yours,
> Denis Perchine
after that dynamic loading isn't working and shared memory handling is
broken.
Attached with this message, there is a Zip file which contain :
* beos.diff = patch file generated with difforig
* beos = folder with beos support files which need to be moved in /
src/backend/port
* expected = foler with three file for message and precision
difference in regression test
* regression.diff = rule problem (need to kill the backend manualy)
* dynloader = dynloader files (they are also in the pacth files,
but there is so much modification that I have join full files)
Everything works except a problem in 'rules' Is there some problems
with rules in the current tree ? It used to works with last week tree.
Cyril VELTER
working on the VERY latest version of BeOS. I'm sure there will be
alot of comments, but then if there weren't I'd be disappointed!
Thanks for your continuing efforts to get this into your tree.
Haven't bothered with the new files as they haven't changed.
BTW Peter, the compiler is "broken" about the bool define and so on.
I'm filing a bug report to try and get it addressed. Hopefully then we
can tidy up the code a bit.
I await the replies with interest :)
David Reid
problems with some bits of it, but when all the patches are in it'll build
and we can fix it from there :) I've got a version that builds and runs and
that is the basis for these patches.
The first file has the new additional files that are required,
template/beos
backend/port/dynloader/beos.c
backend/port/dynloader/beos.h
include/port/beos.h
makefiles/Makefile.beos
The second is a tarball of diffs against a few files. I've added sys/ipc.h
to configure and config.h via configure.in and config.h.in and then started
adding the check as this file isn't needed on BeOS and having loads of
#ifdef BEOS isn't as obvious as #ifdef HAVE_SYS_IPC_H and isn't as
autconf'ish :)
Files touched are
include/c.h
configure.in
include/config.h.in
include/storage/ipc.h
include/utils/int8.h
Let me know how these go. I'll await a response before submitting any more.
Any problems just get in touch.
David Reid
as MaxHeapAttributeNumber. Increase MaxAttrSize to something more
reasonable (given what it's used for, namely checking char(n) declarations,
I didn't make it the full 1G that it could theoretically be --- 10Mb
seemed a more reasonable number). Improve calculation of MaxTupleSize.
duplicate keys by letting search go to the left rather than right when an
equal key is seen at an upper tree level. Fix poor choice of page split
point (leading to insertion failures) that was forced by chaining logic.
Don't store leftmost key in non-leaf pages, since it's not necessary.
Don't create root page until something is first stored in the index, so an
unused index is now 8K not 16K. (Doesn't seem to be as easy to get rid of
the metadata page, unfortunately.) Massive cleanup of unreadable code,
fix poor, obsolete, and just plain wrong documentation and comments.
See src/backend/access/nbtree/README for the gory details.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
PostgreSQL-7.0.2 run on Linux for the Intel-IA64 architecture. It also
fixes a bug in the configure scripts that caused configure to fail on
the fcntl(F_SETLK) test.
This fix triggered a bug in the fcntl(F_SETLK) code of the Linux
kernel when used on unix domain sockets resulting in postmaster to
segfault immediately after startup. There is a fix available and
included in the kernel that will be on SuSE Linux 7.0, but kernels <=
2.2.16 still have this bug.
Reinhard Max
for details). It doesn't really do that much yet, since there are no
short-term memory contexts in the executor, but the infrastructure is
in place and long-term contexts are handled reasonably. A few long-
standing bugs have been fixed, such as 'VACUUM; anything' in a single
query string crashing. Also, out-of-memory is now considered a
recoverable ERROR, not FATAL.
Eliminate a large amount of crufty, now-dead code in and around
memory management.
Fix problem with holding off SIGTRAP, SIGSEGV, etc in postmaster and
backend startup.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
it will close VFDs if necessary to surmount ENFILE or EMFILE failures.
Make use of this in md.c, xlog.c, and user.c routines that were
formerly vulnerable to these failures. In particular, this should
handle failures of mdblindwrt() that have been observed under heavy
load conditions. (By golly, every other process on the system may
crash after Postgres eats up all the kernel FDs, but Postgres will
keep going!)
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
Hiroshi. ReleaseRelationBuffers now removes rel's buffers from pool,
instead of merely marking them nondirty. The old code would leave valid
buffers for a deleted relation, which didn't cause any known problems
but can't possibly be a good idea. There were several places which called
ReleaseRelationBuffers *and* FlushRelationBuffers, which is now
unnecessary; but there were others that did not. FlushRelationBuffers
no longer emits a warning notice if it finds dirty buffers to flush,
because with the current bufmgr behavior that's not an unexpected
condition. Also, FlushRelationBuffers will flush out all dirty buffers
for the relation regardless of block number. This ensures that
pg_upgrade's expectations are met about tuple on-row status bits being
up-to-date on disk. Lastly, tweak BufTableDelete() to clear the
buffer's tag so that no one can mistake it for being a still-valid
buffer for the page it once held. Formerly, the buffer would not be
found by buffer hashtable searches after BufTableDelete(), but it would
still be thought to belong to its old relation by the routines that
sequentially scan the shared-buffer array. Again I know of no bugs
caused by that, but it still can't be a good idea.
whether to do fsync or not, and if so (which should be seldom) just
do the fsync immediately. This way we need not build data structures
in md.c/fd.c for blind writes.
as a shared dirtybit for each shared buffer. The shared dirtybit still
controls writing the buffer, but the local bit controls whether we need
to fsync the buffer's file. This arrangement fixes a bug that allowed
some required fsyncs to be missed, and should improve performance as well.
For more info see my post of same date on pghackers.
In the event of an elog() while the mode was set to immediate write,
there was no way for it to be set back to the normal delayed write.
The mechanism was a waste of space and cycles anyway, since the only user
was varsup.c, which could perfectly well call FlushBuffer directly.
Now it does just that, and the notion of a write mode is gone.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
