RecursiveUnion to which it refers. It turns out that we can just postpone the
relevant initialization steps until the first exec call for the node, by which
time the ancestor node must surely be initialized. Per report from Greg Stark.
implementation uses an in-memory hash table, so it will poop out for very
large recursive results ... but the performance characteristics of a
sort-based implementation would be pretty unpleasant too.
recursive CTE that we're still in progress of analyzing. Add a similar guard
to the similar code in expandRecordVariable(), and tweak regression tests to
cover this case. Per report from Dickson S. Guedes.
There are some unimplemented aspects: recursive queries must use UNION ALL
(should allow UNION too), and we don't have SEARCH or CYCLE clauses.
These might or might not get done for 8.4, but even without them it's a
pretty useful feature.
There are also a couple of small loose ends and definitional quibbles,
which I'll send a memo about to pgsql-hackers shortly. But let's land
the patch now so we can get on with other development.
Yoshiyuki Asaba, with lots of help from Tatsuo Ishii and Tom Lane
element types. Since the backend doesn't actually pay attention to the array
type's delimiter, this has no functional effect, but it seems better for the
catalog entries to be consistent. Per gripe from Greg Mullane and subsequent
discussion.
interpreted as expected (the sign should affect months too), and get rid of
hard-wired assumption that unmarked signed values must be hours (if integers)
or seconds (if floats). The former was just a bug in my previous patch,
while the latter may have made sense at one time but seems illogical now
that we support determination of the units from typmod information.
Ron Mayer and myself.
and the literal syntax INTERVAL 'string' ... SECOND(n), as required by the
SQL standard. Our old syntax put (n) directly after INTERVAL, which was
a mistake, but will still be accepted for backward compatibility as well
as symmetry with the TIMESTAMP cases.
Change intervaltypmodout to show it in the spec's way, too. (This could
potentially affect clients, if there are any that analyze the typmod of an
INTERVAL in any detail.)
Also fix interval input to handle 'min:sec.frac' properly; I had overlooked
this case in my previous patch.
Document the use of the interval fields qualifier, which up to now we had
never mentioned in the docs. (I think the omission was intentional because
it didn't work per spec; but it does now, or at least close enough to be
credible.)
a lot closer than it was before). To do this, tweak coerce_type() to pass
through the typmod information when invoking interval_in() on an UNKNOWN
constant; then fix DecodeInterval to pay attention to the typmod when deciding
how to interpret a units-less integer value. I changed one or two other
details as well. I believe the code now reacts as expected by spec for all
the literal syntaxes that are specifically enumerated in the spec. There
are corner cases involving strings that don't exactly match the set of fields
called out by the typmod, for which we might want to tweak the behavior some
more; but I think this is an area of user friendliness rather than spec
compliance. There remain some non-compliant details about the SQL syntax
(as opposed to what's inside the literal string); but at least we'll throw
error rather than silently doing the wrong thing in those cases.
and anti joins. To do this, pass the SpecialJoinInfo struct for the current
join as an additional optional argument to operator join selectivity
estimation functions. This allows the estimator to tell not only what kind
of join is being formed, but which variable is on which side of the join;
a requirement long recognized but not dealt with till now. This also leaves
the door open for future improvements in the estimators, such as accounting
for the null-insertion effects of lower outer joins. I didn't do anything
about that in the current patch but the information is in principle deducible
from what's passed.
The patch also clarifies the definition of join selectivity for semi/anti
joins: it's the fraction of the left input that has (at least one) match
in the right input. This allows getting rid of some very fuzzy thinking
that I had committed in the original 7.4-era IN-optimization patch.
There's probably room to estimate this better than the present patch does,
but at least we know what to estimate.
Since I had to touch CREATE OPERATOR anyway to allow a variant signature
for join estimator functions, I took the opportunity to add a couple of
additional checks that were missing, per my recent message to -hackers:
* Check that estimator functions return float8;
* Require execute permission at the time of CREATE OPERATOR on the
operator's function as well as the estimator functions;
* Require ownership of any pre-existing operator that's modified by
the command.
I also moved the lookup of the functions out of OperatorCreate() and
into operatorcmds.c, since that seemed more consistent with most of
the other catalog object creation processes, eg CREATE TYPE.
This completes my project of improving usage of hashing for duplicate
elimination (aggregate functions with DISTINCT remain undone, but that's
for some other day).
As with the previous patches, this means we can INTERSECT/EXCEPT on datatypes
that can hash but not sort, and it means that INTERSECT/EXCEPT without ORDER
BY are no longer certain to produce sorted output.
but seem like a separate patch since most of the remaining work is on the
executor side.) I took the opportunity to push selection of the grouping
operators for set operations into the parser where it belongs. Otherwise this
is just a small exercise in making prepunion.c consider both alternatives.
As with the recent DISTINCT patch, this means we can UNION on datatypes that
can hash but not sort, and it means that UNION without ORDER BY is no longer
certain to produce sorted output.
as methods for implementing the DISTINCT step. This eliminates the former
performance gap between DISTINCT and GROUP BY, and also makes it possible
to do SELECT DISTINCT on datatypes that only support hashing not sorting.
SELECT DISTINCT ON is still always implemented by sorting; it would take
executor changes to support hashing that, and it's not clear it's worth
the trouble.
This is a release-note-worthy incompatibility from previous PG versions,
since SELECT DISTINCT can no longer be counted on to deliver sorted output
without explicitly saying ORDER BY. (Anyone who can't cope with that
can consider turning off enable_hashagg.)
Several regression test queries needed to have ORDER BY added to preserve
stable output order. I fixed the ones that manifested here, but there
might be some other cases that show up on other platforms.
only type categories in which the previous coding made *every* type
preferred; so there is no change in effective behavior, because the function
resolution rules only do something different when faced with a choice
between preferred and non-preferred types in the same category. It just
seems safer and less surprising to have CREATE TYPE default to non-preferred
status ...
with system catalog lookups, as was foreseen to be necessary almost since
their creation. Instead put the information into two new pg_type columns,
typcategory and typispreferred. Add support for setting these when
creating a user-defined base type.
The category column is just a "char" (i.e. a poor man's enum), allowing
a crude form of user extensibility of the category list: just use an
otherwise-unused character. This seems sufficient for foreseen uses,
but we could upgrade to having an actual category catalog someday, if
there proves to be a huge demand for custom type categories.
In this patch I have attempted to hew exactly to the behavior of the
previous hardwired logic, except for introducing new type categories for
arrays, composites, and enums. In particular the default preferred state
for user-defined types remains TRUE. That seems worth revisiting, but it
should be done as a separate patch from introducing the infrastructure.
Likewise, any adjustment of the standard set of categories should be done
separately.
need to deconstruct proargmodes for each pg_proc entry inspected by
FuncnameGetCandidates(). Fixes function lookup performance regression
caused by yesterday's variadic-functions patch.
In passing, make pg_proc.probin be NULL, rather than a dummy value '-',
in cases where it is not actually used for the particular type of function.
This should buy back some of the space cost of the extra column.
so long as all the trailing arguments are of the same (non-array) type.
The function receives them as a single array argument (which is why they
have to all be the same type).
It might be useful to extend this facility to aggregates, but this patch
doesn't do that.
This patch imposes a noticeable slowdown on function lookup --- a follow-on
patch will fix that by adding a redundant column to pg_proc.
Pavel Stehule
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
of any lower outer join, even if it also references the non-nullable side and
so could not get pushed below the outer join anyway. We need this in case
the clause is an OR clause: if it doesn't get marked outerjoin_delayed,
create_or_index_quals() could pull an indexable restriction for the nullable
side out of it, leading to wrong results as demonstrated by today's bug
report from toruvinn. (See added regression test case for an example.)
In principle this has been wrong for quite a while. In practice I don't
think any branch before 8.3 can really show the failure, because
create_or_index_quals() will only pull out indexable conditions, and before
8.3 those were always strict. So though we might have improperly generated
null-extended rows in the outer join, they'd get discarded from the result
anyway. The gating factor that makes the failure visible is that 8.3
considers "col IS NULL" to be indexable. Hence I'm not going to risk
back-patching further than 8.3.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
HINT fields to a user-thrown error message, and to specify the SQLSTATE
error code to use. The syntax has also been tweaked so that the
Oracle-compatible case "RAISE exception_name" works (though you won't get a
very nice error message if you just write that much). Lastly, support
the Oracle-compatible syntax "RAISE" with no parameters to re-throw
the current error from within an EXCEPTION block.
In passing, allow the syntax SQLSTATE 'nnnnn' within EXCEPTION lists,
so that there is a way to trap errors with custom SQLSTATE codes.
Pavel Stehule and Tom Lane
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
output is not of the same type that's needed for the IN comparison (ie,
where the parser inserted an implicit coercion above the subselect result).
We should record the coerced expression, not just a raw Var referencing
the subselect output, as the quantity that needs to be unique-ified if
we choose to implement the IN as Unique followed by a plain join.
As of 8.3 this error was causing crashes, as seen in bug #4113 from Javier
Hernandez, because the executor was being told to hash or sort the raw
subselect output column using operators appropriate to the coerced type.
In prior versions there was no crash because the executor chose the
hash or sort operators for itself based on the column type it saw.
However, that's still not really right, because what's unique for one data
type might not be unique for another. In corner cases we could get multiple
outputs of a row that should appear only once, as demonstrated by the
regression test case included in this commit.
However, this patch doesn't apply cleanly to 8.2 or before, and the code
involved has shifted enough over time that I'm hesitant to try to back-patch.
Given the lack of complaints from the field about such corner cases, I think
the bug may not be important enough to risk breaking other things with a
back-patch.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
data. This makes for a significant speedup at the cost that the results
now vary between little-endian and big-endian machines; which forces us
to add explicit ORDER BYs in a couple of regression tests to preserve
machine-independent comparison results. Also, force initdb by bumping
catversion, since the contents of hash indexes will change (at least on
big-endian machines).
Kenneth Marshall and Tom Lane, based on work from Bob Jenkins. This commit
does not adopt Bob's new faster mix() algorithm, however, since we still need
to convince ourselves that that doesn't degrade the quality of the hashing.
algorithm. This is a good deal slower than our old roundoff-error-prone
code for long inputs, so we keep the old code for use in the transcendental
functions, where everything is approximate anyway. Also create a
user-accessible function div(numeric, numeric) to provide access to the
exact result of trunc(x/y) --- since the regular numeric / operator will
round off its result, simply computing that expression in SQL doesn't
reliably give the desired answer. This fixes bug #3387 and various related
corner cases, and improves the usefulness of PG for high-precision integer
arithmetic.
directly to all the member expressions, instead of the previous implementation
where the ARRAY[] constructor would infer a common element type and then we'd
coerce the finished array after the fact. This has a number of benefits,
one being that we can allow an empty ARRAY[] construct so long as its
element type is specified by such a cast.
Brendan Jurd, minor fixes by me.
this adds support for 64-bit tzdata files, which is needed to support DST
calculations beyond 2038. Add a regression test case to give some minimal
confidence that that really works.
Heikki Linnakangas
checking of argument compatibility right; although the problem is only exposed
with multiple-input aggregates in which some arguments are polymorphic and
some are not. Per bug #3852 from Sokolov Yura.
of poorer planning in 8.3 than 8.2:
1. After pushing a constant across an outer join --- ie, given
"a LEFT JOIN b ON (a.x = b.y) WHERE a.x = 42", we can deduce that b.y is
sort of equal to 42, in the sense that we needn't fetch any b rows where
it isn't 42 --- loop to see if any additional deductions can be made.
Previous releases did that by recursing, but I had mistakenly thought that
this was no longer necessary given the EquivalenceClass machinery.
2. Allow pushing constants across outer join conditions even if the
condition is outerjoin_delayed due to a lower outer join. This is safe
as long as the condition is strict and we re-test it at the upper join.
3. Keep the outer-join clause even if we successfully push a constant
across it. This is *necessary* in the outerjoin_delayed case, but
even in the simple case, it seems better to do this to ensure that the
join search order heuristics will consider the join as reasonable to
make. Mark such a clause as having selectivity 1.0, though, since it's
not going to eliminate very many rows after application of the constant
condition.
4. Tweak have_relevant_eclass_joinclause to report that two relations
are joinable when they have vars that are equated to the same constant.
We won't actually generate any joinclause from such an EquivalenceClass,
but again it seems that in such a case it's a good idea to consider
the join as worth costing out.
5. Fix a bug in select_mergejoin_clauses that was exposed by these
changes: we have to reject candidate mergejoin clauses if either side was
equated to a constant, because we can't construct a canonical pathkey list
for such a clause. This is an implementation restriction that might be
worth fixing someday, but it doesn't seem critical to get it done for 8.3.
but no database changes have been made since the last CommandCounterIncrement.
This should result in a significant improvement in the number of "commands"
that can typically be performed within a transaction before hitting the 2^32
CommandId size limit. In particular this buys back (and more) the possible
adverse consequences of my previous patch to fix plan caching behavior.
The implementation requires tracking whether the current CommandCounter
value has been "used" to mark any tuples. CommandCounter values stored into
snapshots are presumed not to be used for this purpose. This requires some
small executor changes, since the executor used to conflate the curcid of
the snapshot it was using with the command ID to mark output tuples with.
Separating these concepts allows some small simplifications in executor APIs.
Something for the TODO list: look into having CommandCounterIncrement not do
AcceptInvalidationMessages. It seems fairly bogus to be doing it there,
but exactly where to do it instead isn't clear, and I'm disinclined to mess
with asynchronous behavior during late beta.
plan before the effects of DDL executed in an immediately prior SPI operation
had been absorbed. Per report from Chris Wood.
This patch has an unpleasant side effect of causing the number of
CommandCounterIncrement()s done by a typical plpgsql function to
approximately double. Amelioration of the consequences of that
will be undertaken in a separate patch.
to a UNION, CASE, or related construct are of the same domain type. The
main part of this routine smashes domains to their base types, which seems
necessary because the logic involves TypeCategory() and IsPreferredType(),
neither of which work usefully on domains. However, we can add a first
pass that just detects whether all the inputs are exactly the same type,
and if so accept that without question (so long as it's not UNKNOWN).
Per recent gripe from Dean Rasheed.
In passing, remove some tests for InvalidOid, which have clearly been dead
code for quite some time now, because getBaseType() would fail on that input.
Also, clarify the manual's not-very-precise description of the existing
algorithm's behavior.
Instead put in a test to drop a NULL default at the last moment before
storing the catalog entry. This changes the behavior in a couple of ways:
* Specifying DEFAULT NULL when creating an inheritance child table will
successfully suppress inheritance of any default expression from the
parent's column, where formerly it failed to do so.
* Specifying DEFAULT NULL for a column of a domain type will correctly
override any default belonging to the domain; likewise for a sub-domain.
The latter change happens because by the time the clause is checked,
it won't be a simple null Const but a CoerceToDomain expression.
Personally I think this should be back-patched, but there doesn't seem to
be consensus for that on pgsql-hackers, so refraining.
in corner cases such as re-fetching a just-deleted row. We may be able to
relax this someday, but let's find out how many people really care before
we invest a lot of work in it. Per report from Heikki and subsequent
discussion.
While in the neighborhood, make the combination of INSENSITIVE and FOR UPDATE
throw an error, since they are semantically incompatible. (Up to now we've
accepted but just ignored the INSENSITIVE option of DECLARE CURSOR.)
then-delete on the current cursor row. The basic fix is that nodeTidscan.c
has to apply heap_get_latest_tid() to the current-scan-TID obtained from the
cursor query; this ensures we get the latest row version to work with.
However, since that only works if the query plan is a TID scan, we also have
to hack the planner to make sure only that type of plan will be selected.
(Formerly, the planner might decide to apply a seqscan if the table is very
small. This change is probably a Good Thing anyway, since it's hard to see
how a seqscan could really win.) That means the execQual.c code to support
CurrentOfExpr as a regular expression type is dead code, so replace it with
just an elog(). Also, add regression tests covering these cases. Note
that the added tests expose the fact that re-fetching an updated row
misbehaves if the cursor used FOR UPDATE. That's an independent bug that
should be fixed later. Per report from Dharmendra Goyal.
if there are zero rows to aggregate over, and the API seems both conceptually
and notationally ugly anyway. We should look for something that improves
on the tsquery-and-text-SELECT version (which is also pretty ugly but at
least it works...), but it seems that will take query infrastructure that
doesn't exist today. (Hm, I wonder if there's anything in or near SQL2003
window functions that would help?) Per discussion.
categories, as per discussion. asciiword (formerly lword) is still
ASCII-letters-only, and numword (formerly word) is still the most general
mixed-alpha-and-digits case. But word (formerly nlword) is now
any-group-of-letters-with-at-least-one-non-ASCII, rather than all-non-ASCII as
before. This is no worse than before for parsing mixed Russian/English text,
which seems to have been the design center for the original coding; and it
should simplify matters for parsing most European languages. In particular
it will not be necessary for any language to accept strings containing digits
as being regular "words". The hyphenated-word categories are adjusted
similarly.
a relation as a reason to invalidate a plan when the relation changes. This
handles scenarios such as dropping/recreating a sequence that is referenced by
nextval('seq') in a cached plan. Rather than teach plancache.c all about
digging through plan trees to find regclass Consts, we charge the planner's
setrefs.c with making a list of the relation OIDs on which each plan depends.
That way the list can be built cheaply during a plan tree traversal that has
to happen anyway. Per bug #3662 and subsequent discussion.
* stats_start_collector goes away; we always start the collector process,
unless prevented by a problem with setting up the stats UDP socket.
* stats_reset_on_server_start goes away; it seems useless in view of the
availability of pg_stat_reset().
* stats_block_level and stats_row_level are merged into a single variable
"track_counts", which controls all reports sent to the collector process.
* stats_command_string is renamed to track_activities.
* log_autovacuum is renamed to log_autovacuum_min_duration to better reflect
its meaning.
The log_autovacuum change is not a compatibility issue since it didn't exist
before 8.3 anyway. The other changes need to be release-noted.
Rename synonym.syn.sample and thesaurs.ths.sample to
synonym_sample.syn and thesaurs_sample.ths accordingly to be able to use they
in regression test.
Ispell dictionary uses synthetic simple dictionary files.
transaction, unless rolled back or overridden by a SET clause for the same
variable attached to a surrounding function call. Per discussion, these
seem the best semantics. Note that this is an INCOMPATIBLE CHANGE: in 8.0
through 8.2, SET LOCAL's effects disappeared at subtransaction commit
(leading to behavior that made little sense at the SQL level).
I took advantage of the opportunity to rewrite and simplify the GUC variable
save/restore logic a little bit. The old idea of a "tentative" value is gone;
it was a hangover from before we had a stack. Also, we no longer need a stack
entry for every nesting level, but only for those in which a variable's value
actually changed.
operator-family rewrite. I had mistakenly supposed that these could use the
pg_amproc entries for text[] and inet[] respectively. However, binary
compatibility of the underlying types does not make two array types binary
compatible (since they must differ in the header field that gives the element
type OID), and so the index support code doesn't consider those entries
applicable. Add back the missing pg_amproc entries, and add an opr_sanity
query to try to catch such mistakes in future. Per report from Gregory
Maxwell.
There are still some loose ends: I didn't do anything about the SET FROM
CURRENT idea yet, and it's not real clear whether we are happy with the
interaction of SET LOCAL with function-local settings. The documentation
is a bit spartan, too.
sets for outer joins, in the light of bug #3588 and additional thought and
experimentation. The original methodology was fatally flawed for nests of
more than two outer joins: it got the relationships between adjacent joins
right, but didn't always come to the right conclusions about whether a join
could be interchanged with one two or more levels below it. This was largely
caused by a mistaken idea that we should use the min_lefthand + min_righthand
sets of a sub-join as the minimum left or right input set of an upper join
when we conclude that the sub-join can't commute with the upper one. If
there's a still-lower join that the sub-join *can* commute with, this method
led us to think that that one could commute with the topmost join; which it
can't. Another problem (not directly connected to bug #3588) was that
make_outerjoininfo's processing-order-dependent method for enforcing outer
join identity #3 didn't work right: if we decided that join A could safely
commute with lower join B, we dropped all information about sub-joins under B
that join A could perhaps not safely commute with, because we removed B's
entire min_righthand from A's.
To fix, make an explicit computation of all inner join combinations that occur
below an outer join, and add to that the full syntactic relsets of any lower
outer joins that we determine it can't commute with. This method gives much
more direct enforcement of the outer join rearrangement identities, and it
turns out not to cost a lot of additional bookkeeping.
Thanks to Richard Harris for the bug report and test case.
Oleg Bartunov and Teodor Sigaev, but I did a lot of editorializing,
so anything that's broken is probably my fault.
Documentation is nonexistent as yet, but let's land the patch so we can
get some portability testing done.
row within one query: we were firing check triggers before all the updates
were done, leading to bogus failures. Fix by making the triggers queued by
an RI update go at the end of the outer query's trigger event list, thereby
effectively making the processing "breadth-first". This was indeed how it
worked pre-8.0, so the bug does not occur in the 7.x branches.
Per report from Pavel Stehule.
that cached compiled patterns will still be there when the function is next
called. Clean up looping logic, thereby fixing bug identified by Pavel
Stehule. Share setup code between the two functions, add some comments, and
avoid risky mixing of int and size_t variables. Clean up the documentation a
tad, and accept all the flag characters mentioned in table 9-19 rather than
just a subset.
clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
CVS HEAD does not contain this bug due to EquivalenceClass rewrite, but it
seems wise to include the regression test for it anyway.
sugar for PL/PgSQL set-returning functions that want to return the result
of evaluating a query; it should also be more efficient than repeated
RETURN NEXT statements. Based on an earlier patch from Pavel Stehule.
a MIN or MAX aggregate call into an indexscan: the initplan is being made at
the current query nesting level and so we shouldn't increment query_level.
Though usually harmless, this mistake could lead to bogus "plan should not
reference subplan's variable" failures on complex queries. Per bug report
from David Sanchez i Gregori.
referencing table does not change the tuple's FK column(s), we don't bother
to check the PK table since the constraint was presumably already valid.
However, the check is still necessary if the tuple was inserted by our own
transaction, since in that case the INSERT trigger will conclude it need not
make the check (since its version of the tuple has been deleted). We got this
right for simple cases, but not when the insert and update are in different
subtransactions of the current top-level transaction; in such cases the FK
check would never be made at all. (Hence, problem dates back to 8.0 when
subtransactions were added --- it's actually the subtransaction version of a
bug fixed in 7.3.5.) Fix, and add regression test cases. Report and fix by
Affan Salman.
name. With this patch, it is always possible for the user to qualify a
plpgsql variable name if needed to avoid ambiguity. While there is much more
work to be done in this area, this simple change removes one unnecessary
incompatibility with Oracle. Per discussion.
ORDER BY <constant> as redundant. One is that this means query_planner()
has to canonicalize pathkeys even when the query jointree is empty;
the canonicalization was always a no-op in such cases before, but no more.
Also, we have to guard against thinking that a set-returning function is
"constant" for this purpose. Add a couple of regression tests for these
evidently under-tested cases. Per report from Greg Stark and subsequent
experimentation.
unwarranted liberties with int8 vs float8 values for these types.
Specifically, be sure to apply either hashint8 or hashfloat8 depending
on HAVE_INT64_TIMESTAMP. Per my gripe of even date.
an array of strings rather than an array of integers, and allow any simple
constant or identifier to be used in typmods; for example
create table foo (f1 widget(42,'23skidoo',point));
Of course the typmodin function has still got to pack this info into a
non-negative int32 for storage, but it's still a useful improvement in
flexibility, especially considering that you can do nearly anything if you
are willing to keep the info in a side table. We can get away with this
change since we have not yet released a version providing user-definable
typmods. Per discussion.
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
Along the way, allow FOR UPDATE in non-WITH-HOLD cursors; there may once
have been a reason to disallow that, but it seems to work now, and it's
really rather necessary if you want to select a row via a cursor and then
update it in a concurrent-safe fashion.
Original patch by Arul Shaji, rather heavily editorialized by Tom Lane.
results due to syncscan patch, when shared_buffers is small enough. Per
buildfarm reports and some local testing with shared_buffers set to the
lowest value considered by initdb.
were accepted by prior Postgres releases. This takes care of the loose end
left by the preceding patch to downgrade implicit casts-to-text. To avoid
breaking desirable behavior for array concatenation, introduce a new
polymorphic pseudo-type "anynonarray" --- the added concatenation operators
are actually text || anynonarray and anynonarray || text.
from the other string-category types; this eliminates a lot of surprising
interpretations that the parser could formerly make when there was no directly
applicable operator.
Create a general mechanism that supports casts to and from the standard string
types (text,varchar,bpchar) for *every* datatype, by invoking the datatype's
I/O functions. These new casts are assignment-only in the to-string direction,
explicit-only in the other, and therefore should create no surprising behavior.
Remove a bunch of thereby-obsoleted datatype-specific casting functions.
The "general mechanism" is a new expression node type CoerceViaIO that can
actually convert between *any* two datatypes if their external text
representations are compatible. This is more general than needed for the
immediate feature, but might be useful in plpgsql or other places in future.
This commit does nothing about the issue that applying the concatenation
operator || to non-text types will now fail, often with strange error messages
due to misinterpreting the operator as array concatenation. Since it often
(not always) worked before, we should either make it succeed or at least give
a more user-friendly error; but details are still under debate.
Peter Eisentraut and Tom Lane
type. Also, add explicit casts between boolean and text/varchar. Both
of these changes are for conformance with SQL:2003.
Update the regression tests, bump the catversion.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
inheritance child of an UPDATE/DELETE target relation can be excluded by
constraints. I had rearranged some code in set_append_rel_pathlist() to
avoid "useless" work when a child is excluded, but overdid it and left
the child with no cheapest_path entry, causing possible failure later
if the appendrel was involved in a join. Also, it seems that the dummy
plan generated by inheritance_planner() when all branches are excluded
has to be a bit less dummy now than was required in 8.2.
Per report from Jan Wieck. Add his test case to the regression tests.
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
recompute the limit/offset immediately, so that the updated values are
available when the child's ReScan function is invoked. Add a regression
test for this, too. Bug is new in HEAD (due to the bounded-sorting patch)
so no need for back-patch.
I did not do anything about merging this signaling with chgParam processing,
but if we were to do that we'd still need to compute the updated values
at this point rather than during the first ProcNode call.
Per observation and test case from Greg Stark, though I didn't use his patch.
named foo, would work but the other ordering would not. If a user-specified
type or table name collides with an existing auto-generated array name, just
rename the array type out of the way by prepending more underscores. This
should not create any backward-compatibility issues, since the cases in which
this will happen would have failed outright in prior releases.
Also fix an oversight in the arrays-of-composites patch: ALTER TABLE RENAME
renamed the table's rowtype but not its array type.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
and views (but not system catalogs, nor sequences or toast tables). Get rid
of the hardwired convention that a type's array type is named exactly "_type",
instead using a new column pg_type.typarray to provide the linkage. (It still
will be named "_type", though, except in odd corner cases such as
maximum-length type names.)
Along the way, make tracking of owner and schema dependencies for types more
uniform: a type directly created by the user has these dependencies, while a
table rowtype or auto-generated array type does not have them, but depends on
its parent object instead.
David Fetter, Andrew Dunstan, Tom Lane
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
messages to the stats collector. This avoids the problem that enabling
stats_row_level for autovacuum has a significant overhead for short
read-only transactions, as noted by Arjen van der Meijden. We can avoid
an extra gettimeofday call by piggybacking on the one done for WAL-logging
xact commit or abort (although that doesn't help read-only transactions,
since they don't WAL-log anything).
In my proposal for this, I noted that we could change the WAL log entries
for commit/abort to record full TimestampTz precision, instead of only
time_t as at present. That's not done in this patch, but will be committed
separately.
RESET SESSION, RESET PLANS, and RESET TEMP are now DISCARD ALL,
DISCARD PLANS, and DISCARD TEMP, respectively. This is to avoid
confusion with the pre-existing RESET variants: the DISCARD
commands are not actually similar to RESET. Patch from Marko
Kreen, with some minor editorialization.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
search_path that was active when the plan was first made. To do this,
improve namespace.c to support a stack of "override" search path settings
(we must have a stack since nested replan events are entirely possible).
This facility replaces the "special namespace" hack formerly used by
CREATE SCHEMA, and should be able to support per-function search path
settings as well.
First, genericcostestimate() was being way too liberal about including
partial-index conditions in its selectivity estimate, resulting in
substantial underestimates for situations such as an indexqual "x = 42"
used with an index on x "WHERE x >= 40 AND x < 50". While the code is
intentionally set up to favor selecting partial indexes when available,
this was too much...
Second, choose_bitmap_and() was likewise easily fooled by cases of this
type, since it would similarly think that the partial index had selectivity
independent of the indexqual.
Fixed by using predicate_implied_by() rather than simple equality checks
to determine redundancy. This is a good deal more expensive but I don't
see much alternative. At least the extra cost is only paid when there's
actually a partial index under consideration.
Per report from Jeff Davis. I'm not going to risk back-patching this,
though.
and regexp_split_to_table. These functions provide access to the
capture groups resulting from a POSIX regular expression match,
and provide the ability to split a string on a POSIX regular
expression, respectively. Patch from Jeremy Drake; code review by
Neil Conway, additional comments and suggestions from Tom and
Peter E.
This patch bumps the catversion, adds some regression tests,
and updates the docs.
was expecting there to be no regular table named 'foo', but it turns out
the rules test transiently creates one, so that plancache would sometimes
fail. I couldn't reproduce that in quite a few tries here, but several
buildfarm machines have shown the failure. Fix by renaming plancache's
temp table to something nonconflicting.
uses SPI plans, this finally fixes the ancient gotcha that you can't
drop and recreate a temp table used by a plpgsql function.
Along the way, clean up SPI's API a little bit by declaring SPI plan
pointers as "SPIPlanPtr" instead of "void *". This is cosmetic but
helps to forestall simple programming mistakes. (I have changed some
but not all of the callers to match; there are still some "void *"'s
in contrib and the PL's. This is intentional so that we can see if
anyone's compiler complains about it.)
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
to_timestamp():
- ID for day-of-week
- IDDD for day-of-year
This makes it possible to convert ISO week dates to and from text
fully represented in either week ('IYYY-IW-ID') or day-of-year
('IYYY-IDDD') format.
I have also added an 'isoyear' field for use with extract / date_part.
Brendan Jurd
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
equality checks it applies, instead of a random dependence on whatever
operators might be named "=". The equality operators will now be selected
from the opfamily of the unique index that the FK constraint depends on to
enforce uniqueness of the referenced columns; therefore they are certain to be
consistent with that index's notion of equality. Among other things this
should fix the problem noted awhile back that pg_dump may fail for foreign-key
constraints on user-defined types when the required operators aren't in the
search path. This also means that the former warning condition about "foreign
key constraint will require costly sequential scans" is gone: if the
comparison condition isn't indexable then we'll reject the constraint
entirely. All per past discussions.
Along the way, make the RI triggers look into pg_constraint for their
information, instead of using pg_trigger.tgargs; and get rid of the always
error-prone fixed-size string buffers in ri_triggers.c in favor of building up
the RI queries in StringInfo buffers.
initdb forced due to columns added to pg_constraint and pg_trigger.
currently have any better strategy for this query than re-running the
sub-select over and over; it seems unlikely that doing so 10000 times
is a more useful test than doing it a few dozen times.
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
already collected in the current transaction; this allows plpgsql functions to
watch for stats updates even though they are confined to a single transaction.
Use this instead of the previous kluge involving pg_stat_file() to wait for
the stats collector to update in the stats regression test. Internally,
decouple storage of stats snapshots from transaction boundaries; they'll
now stick around until someone calls pgstat_clear_snapshot --- which xact.c
still does at transaction end, to maintain the previous behavior. This makes
the logic a lot cleaner, at the price of a couple dozen cycles per transaction
exit.
changes (with an upper limit of 30 seconds), and record the delay time in
the postmaster log. This should give us some info about what's happening
with the intermittent stats failures in buildfarm. After an idea of
Andrew Dunstan's.
that aren't turned into true joins). Since this is the last missing bit of
infrastructure, go ahead and fill out the hash integer_ops and float_ops
opfamilies with cross-type operators. The operator family project is now
DONE ... er, except for documentation ...
observe the xmloption.
Reorganize the representation of the XML option in the parse tree and the
API to make it easier to manage and understand.
Add regression tests for parsing back XML expressions.
nonportable "hh" sprintf(3) length modifier. Instead, do the parsing
and output by hand. The code to do this isn't ideal, but this is
an interim measure anyway: the uuid type should probably use the
in-memory struct layout specified by RFC 4122. For now, this patch
should hopefully rectify the buildfarm failures for the uuid test.
Along the way, re-add pg_cast entries for uuid <-> varchar, which
I mistakenly removed earlier, and bump the catversion.
that defined in RFC 4122. This patch includes the basic implementation,
plus regression tests. Documentation and perhaps some additional
functionality will come later. Catversion bumped.
Patch from Gevik Babakhani; review from Peter, Tom, and myself.
activity quiesce. Possibly this will fix the large increase in
non-reproducible stats test failures we've noted since turning on
stats_row_level by default.
- Add new SQL command SET XML OPTION (also available via regular GUC) to
control the DOCUMENT vs. CONTENT option in implicit parsing and
serialization operations.
- Subtle corrections in the handling of the standalone property in
xmlroot().
- Allow xmlroot() to work on content fragments.
- Subtle corrections in the handling of the version property in
xmlconcat().
- Code refactoring for producing XML declarations.
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
The implementation is somewhat ugly logic-wise, but I don't see an
easy way to make it more concise.
When writing this, I noticed that my previous implementation of
width_bucket() doesn't handle NaN correctly:
postgres=# select width_bucket('NaN', 1, 5, 5);
width_bucket
--------------
6
(1 row)
AFAICS SQL:2003 does not define a NaN value, so it doesn't address how
width_bucket() should behave here. The patch changes width_bucket() so
that ereport(ERROR) is raised if NaN is specified for the operand or the
lower or upper bounds to width_bucket(). For float8, NaN is disallowed
for any of the floating-point inputs, and +/- infinity is disallowed
for the histogram bounds (but allowed for the operand).
Update docs and regression tests, bump the catversion.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
sets the items, and serializes the value back (rather than adding an
arbitrary number of XML preambles as before).
The libxml memory management via palloc had to be disabled because it
crashes when libxml tries to access memory that was helpfully freed
earlier by PostgreSQL. This needs further thought.
valid result from a computation if one of the input values was infinity.
The previous code assumed an operation that returned infinity was an
overflow.
Handle underflow/overflow consistently, and add checks for aggregate
overflow.
Consistently prevent Inf/Nan from being cast to integer data types.
Fix INT_MIN % -1 to prevent overflow.
Update regression results for new error text.
Per report from Roman Kononov.
the XmlExpr code in various lists, use a representation that has some hope
of reverse-listing correctly (though it's still a de-escaping function
shy of correctness), generally try to make it look more like Postgres
coding conventions.
cases. Operator classes now exist within "operator families". While most
families are equivalent to a single class, related classes can be grouped
into one family to represent the fact that they are semantically compatible.
Cross-type operators are now naturally adjunct parts of a family, without
having to wedge them into a particular opclass as we had done originally.
This commit restructures the catalogs and cleans up enough of the fallout so
that everything still works at least as well as before, but most of the work
needed to actually improve the planner's behavior will come later. Also,
there are not yet CREATE/DROP/ALTER OPERATOR FAMILY commands; the only way
to create a new family right now is to allow CREATE OPERATOR CLASS to make
one by default. I owe some more documentation work, too. But that can all
be done in smaller pieces once this infrastructure is in place.
operator strategy numbers, ie, GiST and GIN. This is almost cosmetic
enough to not need a catversion bump, but since the opr_sanity regression
test has to change in sync with the catalog entry, I figured I'd better
do one.
input routines. Remove the former "DecodePosixTimezone" function in favor of
letting the zic code handle POSIX-style zone specs (see tzparse()). In
particular this means that "PST+3" now means the same as "-03", whereas it
used to mean "-11" --- the zone abbreviation is effectively just a noise word
in this syntax. Make sure that all named and POSIX-style zone names will be
parsed as a single token. Fix long-standing bogosities in printing and input
of fractional-hour timezone offsets (since the tzparse() code will accept
these, we'd better make 'em work). Also correct an error in the original
coding of the zic-zone-name patch: in "timestamp without time zone" input,
zone names are supposed to be allowed but ignored, but the coding was such
that the zone changed the interpretation anyway.
present; intervening positions are filled with nulls. This behavior
is required by SQL99 but was not implementable before 8.2 due to lack
of support for nulls in arrays. I have only made it work for the
one-dimensional case, which is all that SQL99 requires. It seems quite
complex to get it right in higher dimensions, and since we never allowed
extension at all in higher dimensions, I think that must count as a
future feature addition not a bug fix.
agreed these symbols are less easily confused. I made new pg_operator
entries (with new OIDs) for the old names, so as to provide backward
compatibility while making it pretty easy to remove the old names in
some future release cycle. This commit only touches the core datatypes,
contrib will be fixed separately.
can create or modify rules for the table. Do setRuleCheckAsUser() while
loading rules into the relcache, rather than when defining a rule. This
ensures that permission checks for tables referenced in a rule are done with
respect to the current owner of the rule's table, whereas formerly ALTER TABLE
OWNER would fail to update the permission checking for associated rules.
Removal of separate RULE privilege is needed to prevent various scenarios
in which a grantee of RULE privilege could effectively have any privilege
of the table owner. For backwards compatibility, GRANT/REVOKE RULE is still
accepted, but it doesn't do anything. Per discussion here:
http://archives.postgresql.org/pgsql-hackers/2006-04/msg01138.php
cascaded first to days and only what is leftover into seconds. This
seems to satisfy the principle of least surprise given the general
conversion to three-part interval values --- it was an oversight that
these cases weren't dealt with in 8.1. Michael Glaesemann
of the syntax as this fundamentally dead-end approach can, in particular
combinations of single and multi column assignments. Improve rather
inadequate documentation and provide some regression tests.
RETURNING play nice with views/rules. To wit, have the rule rewriter
rewrite any RETURNING clause found in a rule to produce what the rule's
triggering query asked for in its RETURNING clause, in particular drop
the RETURNING clause if no RETURNING in the triggering query. This
leaves the responsibility for knowing how to produce the view's output
columns on the rule author, without requiring any fundamental changes
in rule semantics such as adding new rule event types would do. The
initial implementation constrains things to ensure that there is
exactly one, unconditionally invoked RETURNING clause among the rules
for an event --- later we might be able to relax that, but for a post
feature freeze fix it seems better to minimize how much invention we do.
Per gripe from Jaime Casanova.
by abandoning the idea that it should say SERIAL in the dump. Instead,
dump serial sequences and column defaults just like regular ones.
Add a new backend command ALTER SEQUENCE OWNED BY to let pg_dump recreate
the sequence-to-column dependency that was formerly created "behind the
scenes" by SERIAL. This restores SERIAL to being truly "just a macro"
consisting of component operations that can be stated explicitly in SQL.
Furthermore, the new command allows sequence ownership to be reassigned,
so that old mistakes can be cleaned up.
Also, downgrade the OWNED-BY dependency from INTERNAL to AUTO, since there
is no longer any very compelling argument why the sequence couldn't be
dropped while keeping the column. (This forces initdb, to be sure the
right kinds of dependencies are in there.)
Along the way, add checks to prevent ALTER OWNER or SET SCHEMA on an
owned sequence; you can now only do this indirectly by changing the
owning table's owner or schema. This is an oversight in previous
releases, but probably not worth back-patching.
well as vacuum_cost_delay. Since datestyle is a string variable,
this exercises memory allocation issues that might not appear when
modifying an integer GUC variable. Also, we can observe the side
effects of changing datestyle to check that assign hooks are called
at the right times.
nonunique join value, leading to plan-choice-dependent results ... and
it seems some platforms will choose a different plan. Tweak the test
so that it has well-defined results. Per report from Olivier Prenant.
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
without indexes) but not to display temp tables. It's a bit hard to
credit that sanity_check could get through a database-wide VACUUM
while the preceding create_index test is still trying to clean up
its temp tables ... but I see no other explanation for the current
failure report from buildfarm member sponge.
the float8 versions of the aggregates, which is all that the standard requires.
Sergey's original patch also provided versions using numeric arithmetic,
but given the size and slowness of the code, I doubt we ought to include
those in core.
the opportunity to treat COUNT(*) as a zero-argument aggregate instead
of the old hack that equated it to COUNT(1); this is materially cleaner
(no more weird ANYOID cases) and ought to be at least a tiny bit faster.
Original patch by Sergey Koposov; review, documentation, simple regression
tests, pg_dump and psql support by moi.
configuration files that can be altered by a DBA. The australian_timezones
GUC setting disappears, replaced by a timezone_abbreviations setting (set this
to 'Australia' to get the effect of australian_timezones). The list of zone
names defined by default has undergone a bit of cleanup, too. Documentation
still needs some work --- in particular, should we fix Table B-4, or just get
rid of it? Joachim Wieland, with some editorializing by moi.
code to forcibly drop regressuser[1-4] and regressgroup[1-2]. Instead,
let the privileges.sql test do that for itself (this is made easy by
the recent addition of DROP ROLE IF EXISTS). Per a recent patch proposed
by Joachim Wieland --- the rest of his patch is superseded by the
rewrite into C, but this is a good idea we should adopt.
Open items:
There were a few tangentially related issues that have come up that I think
are TODOs. I'm likely to tackle one or two of these next so I'm interested in
hearing feedback on them as well.
. Constraints currently do not know anything about inheritance. Tom suggested
adding a coninhcount and conislocal like attributes have to track their
inheritance status.
. Foreign key constraints currently do not get copied to new children (and
therefore my code doesn't verify them). I don't think it would be hard to
add them and treat them like CHECK constraints.
. No constraints at all are copied to tables defined with LIKE. That makes it
hard to use LIKE to define new partitions. The standard defines LIKE and
specifically says it does not copy constraints. But the standard already has
an option called INCLUDING DEFAULTS; we could always define a non-standard
extension LIKE table INCLUDING CONSTRAINTS that gives the user the option to
request a copy including constraints.
. Personally, I think the whole attislocal thing is bunk. The decision about
whether to drop a column from children tables or not is something that
should be up to the user and trying to DWIM based on whether there was ever
a local definition or the column was acquired purely through inheritance is
hardly ever going to match up with user expectations.
. And of course there's the whole unique and primary key constraint issue. I
think to get any traction at all on this you have a prerequisite of a real
partitioned table implementation where the system knows what the partition
key is so it can recognize when it's a leading part of an index key.
Greg Stark
the order in which it visits tables is not dependent on the physical order
of pg_constraint entries, and neither are the error messages it gives.
This should correct recently-noticed instability in regression tests.
will be expanded to a list of their member fields, rather than creating
a nested rowtype field as formerly. (The old behavior is still available
by omitting '.*'.) This syntax is not allowed by the SQL spec AFAICS,
so changing its behavior doesn't violate the spec. The new behavior is
substantially more useful since it allows, for example, triggers to check
for data changes with 'if row(new.*) is distinct from row(old.*)'. Per
my recent proposal.
We have once or twice seen failures suggesting that control didn't get
to the exception block before the timeout elapsed, which is unlikely
but not impossible in a parallel regression test (with a dozen other
backends competing for cycles). This change doesn't completely prevent
the problem of course, but it should reduce the probability enough that
we don't see it anymore. Per buildfarm results.
---------------------------------------------------------------------------
Add dynamic record inspection to PL/PgSQL, useful for generic triggers:
tval2 := r.(cname);
or
columns := r.(*);
Titus von Boxberg
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
command or expression, rather than one copy for each textual occurrence as
it did before. This might result in some small performance improvement,
but the compelling reason to do it is that not doing so can result in
unexpected grouping failures because the main SQL parser won't see different
parameter numbers as equivalent. Add a regression test for the failure case.
Per report from Robert Davidson.
2005-05-13. When we find that a new inner tuple can't possibly match any
outer tuple (because it contains a NULL), we can't immediately skip the
tuple when we are in NEXTINNER state. Doing so can lead to emitting
multiple copies of the tuple in FillInner mode, because we may rescan the
tuple after returning to a previous marked tuple. Instead, proceed to
NEXTOUTER state the same as we used to do. After we've found that there's
no need to return to the marked position, we can go to SKIPINNER_ADVANCE
state instead of SKIP_TEST when the inner tuple is unmatchable; this
preserves the performance improvement. Per bug report from Bruce.
I also made a couple of cosmetic code rearrangements and added a regression
test for the problem.
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Mark Dilger
creation of a shell type. This allows a less hacky way of dealing with
the mutual dependency between a datatype and its I/O functions: make a
shell type, then make the functions, then define the datatype fully.
We should fix pg_dump to handle things this way, but this commit just deals
with the backend.
Martijn van Oosterhout, with some corrections by Tom Lane.
up a bunch of the support utilities.
In src/backend/utils/mb/Unicode remove nearly duplicate copies of the
UCS_to_XXX perl script and replace with one version to handle all generic
files. Update the Makefile so that it knows about all the map files.
This produces a slight difference in some of the map files, using a
uniform naming convention and not mapping the null character.
In src/backend/utils/mb/conversion_procs create a master utf8<->win
codepage function like the ISO 8859 versions instead of having a separate
handler for each conversion.
There is an externally visible change in the name of the win1258 to utf8
conversion. According to the documentation notes, it was named
incorrectly and this changes it to a standard name.
Running the Unicode mapping perl scripts has shown some additional mapping
changes in koi8r and iso8859-7.
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
and DELETE. If specified, the alias must be used instead of the full
table name. Also, the alias currently cannot be used in the SET clause
of UPDATE.
Patch from Atsushi Ogawa, various editorialization by Neil Conway.
Along the way, make the rowtypes regression test pass if add_missing_from
is enabled, and add a new (skeletal) regression test for DELETE.
cursors. Patch from Joachim Wieland, review and ediorialization by Neil
Conway. The view lists cursors defined by DECLARE CURSOR, using SPI, or
via the Bind message of the frontend/backend protocol. This means the
view does not list the unnamed portal or the portal created to implement
EXECUTE. Because we do list SPI portals, there might be more rows in
this view than you might expect if you are using SPI implicitly (e.g.
via a procedural language).
Per recent discussion on -hackers, the query string included in the
view for cursors defined by DECLARE CURSOR is based on
debug_query_string. That means it is not accurate if multiple queries
separated by semicolons are submitted as one query string. However,
there doesn't seem a trivial fix for that: debug_query_string
is better than nothing. I also changed SPI_cursor_open() to include
the source text for the portal it creates: AFAICS there is no reason
not to do this.
Update the documentation and regression tests, bump the catversion.
data type is unspecified or is declared to be "unknown", the type will
be inferred from the context in which the parameter is used. This was
already possible for protocol-level prepared statements.
access information about the prepared statements that are available
in the current session. Original patch from Joachim Wieland, various
improvements by Neil Conway.
The "statement" column of the view contains the literal query string
sent by the client, without any rewriting or pretty printing. This
means that prepared statements created via SQL will be prefixed with
"PREPARE ... AS ", whereas those prepared via the FE/BE protocol will
not. That is unfortunate, but discussion on -patches did not yield an
efficient way to improve this, and there is some merit in returning
exactly what the client sent to the backend.
Catalog version bumped, regression tests updated.
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
a SubLink expression into a rule query. Pre-8.1 we essentially did this
unconditionally; 8.1 tries to do it only when needed, but was missing a
couple of cases. Per report from Kyle Bateman. Add some regression test
cases covering this area.
process of dropping roles by dropping objects owned by them and privileges
granted to them, or giving the owned objects to someone else, through the
use of the data stored in the new pg_shdepend catalog.
Some refactoring of the GRANT/REVOKE code was needed, as well as ALTER OWNER
code. Further cleanup of code duplication in the GRANT code seems necessary.
Implemented by me after an idea from Tom Lane, who also provided various kind
of implementation advice.
Regression tests pass. Some tests for the new functionality are also added,
as well as rudimentary documentation.
Tom Lane
Peter Eisentraut
Bruce Momjian
Alvaro Herrera
Andrew Dunstan
D'Arcy J.M. Cain
Teodor Sigaev
Neil Conway
Tatsuo Ishii