While prepare_sort_from_pathkeys has to be concerned about matching up
a volatile expression to the proper tlist entry, we don't need to do
that in find_em_expr_usable_for_sorting_rel becausee such a sort will
have to be postponed anyway.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs%3DhC0mSksZC%3DH5M8LSchj5e5OxpTAg%40mail.gmail.com
While we do allow SRFs in ORDER BY, scan/join processing should not
consider such cases - such sorts should only happen via final Sort atop
a ProjectSet. So make sure we don't try adding such sorts below Gather
Merge, just like we do for expressions that are volatile and/or not
parallel safe.
Backpatch to PostgreSQL 13, where this code was introduced as part of
the Incremental Sort patch.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Discussion: https://postgr.es/m/295524.1606246314%40sss.pgh.pa.us
Commit ebb7ae839d ensured we ignore pathkeys with volatile expressions
when considering adding a sort below a Gather Merge. Turns out we need
to care about parallel safety of the pathkeys too, otherwise we might
try sorting e.g. on results of a correlated subquery (as demonstrated
by a report from Luis Roberto).
Initial investigation by Tom Lane, patch by James Coleman. Backpatch
to 13, where the code was instroduced (as part of Incremental Sort).
Reported-by: Luis Roberto
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/622580997.37108180.1604080457319.JavaMail.zimbra%40siscobra.com.br
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
generate_useful_gather_paths used to skip unsorted paths (without any
pathkeys), but that is unnecessary - the later code actually can handle
such paths just fine by adding a Sort node. This is clearly a thinko,
preventing construction of useful plans.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Discussion: https://postgr.es/m/CAAaqYe8cK3g5CfLC4w7bs=hC0mSksZC=H5M8LSchj5e5OxpTAg@mail.gmail.com
Formerly, extended statistics only handled clauses that were
RestrictInfos. However, the restrictinfo machinery doesn't create
sub-AND RestrictInfos for AND clauses underneath OR clauses.
Therefore teach extended statistics to handle bare AND clauses,
looking for compatible RestrictInfo clauses underneath them.
Dean Rasheed, reviewed by Tomas Vondra.
Discussion: https://postgr.es/m/CAEZATCW=J65GUFm50RcPv-iASnS2mTXQbr=CfBvWRVhFLJ_fWA@mail.gmail.com
Formerly we only applied extended statistics to an OR clause as part
of the clauselist_selectivity() code path for an OR clause appearing
in an implicitly-ANDed list of clauses. This meant that it could only
use extended statistics if all sub-clauses of the OR clause were
covered by a single extended statistics object.
Instead, teach clause_selectivity() how to apply extended statistics
to an OR clause by handling its ORed list of sub-clauses in a similar
manner to an implicitly-ANDed list of sub-clauses, but with different
combination rules. This allows one or more extended statistics objects
to be used to estimate all or part of the list of sub-clauses. Any
remaining sub-clauses are then treated as if they are independent.
Additionally, to avoid double-application of extended statistics, this
introduces "extended" versions of clause_selectivity() and
clauselist_selectivity(), which include an option to ignore extended
statistics. This replaces the old clauselist_selectivity_simple()
function which failed to completely ignore extended statistics when
called from the extended statistics code.
A known limitation of the current infrastructure is that an AND clause
under an OR clause is not treated as compatible with extended
statistics (because we don't build RestrictInfos for such sub-AND
clauses). Thus, for example, "(a=1 AND b=1) OR (a=2 AND b=2)" will
currently be treated as two independent AND clauses (each of which may
be estimated using extended statistics), but extended statistics will
not currently be used to account for any possible overlap between
those clauses. Improving that is left as a task for the future.
Original patch by Tomas Vondra, with additional improvements by me.
Discussion: https://postgr.es/m/20200113230008.g67iyk4cs3xbnjju@development
When considering Incremental Sort below a Gather Merge, we need to be
a bit more careful when matching pathkeys to EC members. It's not enough
to find a member whose Vars are all in the current relation's target;
volatile expressions in particular need to be contained in the target,
otherwise it's too early to use the pathkey.
Reported-by: Jaime Casanova
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13, where the incremental sort code was added
Discussion: https://postgr.es/m/CAJGNTeNaxpXgBVcRhJX%2B2vSbq%2BF2kJqGBcvompmpvXb7pq%2BoFA%40mail.gmail.com
Previously we only tagged on the required information to allow the
executor to perform run-time partition pruning for Append/MergeAppend
nodes belonging to base relations. It was thought that nested
Append/MergeAppend nodes were just about always pulled up into the
top-level Append/MergeAppend and that making the run-time pruning info for
any sub Append/MergeAppend nodes was a waste of time. However, that was
likely badly thought through.
Some examples of cases we're unable to pullup nested Append/MergeAppends
are: 1) Parallel Append nodes with a mix of parallel and non-parallel
paths into a Parallel Append. 2) When planning an ordered Append scan a
sub-partition which is unordered may require a nested MergeAppend path to
ensure sub-partitions don't mix up the order of tuples being fed into the
top-level Append.
Unfortunately, it was not just as simple as removing the lines in
createplan.c which were purposefully not building the run-time pruning
info for anything but RELOPT_BASEREL relations. The code in
add_paths_to_append_rel() was far too sloppy about which partitioned_rels
it included for the Append/MergeAppend paths. The original code there
would always assume accumulate_append_subpath() would pull each sub-Append
and sub-MergeAppend path into the top-level path. While it does not
appear that there were any actual bugs caused by having the additional
partitioned table RT indexes recorded, what it did mean is that later in
planning, when we built the run-time pruning info that we wasted effort
and built PartitionedRelPruneInfos for partitioned tables that we had no
subpaths for the executor to run-time prune.
Here we tighten that up so that partitioned_rels only ever contains the RT
index for partitioned tables which actually have subpaths in the given
Append/MergeAppend. We can now Assert that every PartitionedRelPruneInfo
has a non-empty present_parts. That should allow us to catch any weird
corner cases that have been missed.
In passing, it seems there is no longer a good reason to have the
AppendPath and MergeAppendPath's partitioned_rel fields a List of IntList.
We can simply have a List of Relids instead. This is more compact in
memory and faster to add new members to. We still know which is the root
level partition as these always have a lower relid than their children.
Previously this field was used for more things, but run-time partition
pruning now remains the only user of it and it has no need for a List of
IntLists.
Here we also get rid of the RelOptInfo partitioned_child_rels field. This
is what was previously used to (sometimes incorrectly) set the
Append/MergeAppend path's partitioned_rels field. That was the only usage
of that field, so we can happily just remove it.
I also couldn't resist changing some nearby code to make use of the newly
added for_each_from macro so we can skip the first element in the list
without checking if the current item was the first one on each
iteration.
A bug report from Andreas Kretschmer prompted all this work, however,
after some consideration, I'm not personally classing this as a bug fix.
So no backpatch. In Andreas' test case, it just wasn't that clear that
there was a nested Append since the top-level Append just had a single
sub-path which was pulled up a level, per 8edd0e794.
Author: David Rowley
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/flat/CAApHDvqSchs%2BubdybcfFaSPB%2B%2BEA7kqMaoqajtP0GtZvzOOR3g%40mail.gmail.com
get_foreign_key_join_selectivity() looks for join clauses that equate
the two sides of the FK constraint. However, if we have a query like
"WHERE fktab.a = pktab.a and fktab.a = 1", it won't find any such join
clause, because equivclass.c replaces the given clauses with "fktab.a
= 1 and pktab.a = 1", which can be enforced at the scan level, leaving
nothing to be done for column "a" at the join level.
We can fix that expectation without much trouble, but then a new problem
arises: applying the foreign-key-based selectivity rule produces a
rowcount underestimate, because we're effectively double-counting the
selectivity of the "fktab.a = 1" clause. So we have to cancel that
selectivity out of the estimate.
To fix, refactor process_implied_equality() so that it can pass back the
new RestrictInfo to its callers in equivclass.c, allowing the generated
"fktab.a = 1" clause to be saved in the EquivalenceClass's ec_derives
list. Then it's not much trouble to dig out the relevant RestrictInfo
when we need to adjust an FK selectivity estimate. (While at it, we
can also remove the expensive use of initialize_mergeclause_eclasses()
to set up the new RestrictInfo's left_ec and right_ec pointers.
The equivclass.c code can set those basically for free.)
This seems like clearly a bug fix, but I'm hesitant to back-patch it,
first because there's some API/ABI risk for extensions and second because
we're usually loath to destabilize plan choices in stable branches.
Per report from Sigrid Ehrenreich.
Discussion: https://postgr.es/m/1019549.1603770457@sss.pgh.pa.us
Discussion: https://postgr.es/m/AM6PR02MB5287A0ADD936C1FA80973E72AB190@AM6PR02MB5287.eurprd02.prod.outlook.com
There is a handful of places where we called list_delete_ptr() to remove
some element from a List. In many of these places we know, or with very
little additional effort know the index of the ListCell that we need to
remove.
Here we change all of those places to instead either use one of;
list_delete_nth_cell(), foreach_delete_current() or list_delete_last().
Each of these saves from having to iterate over the list to search for the
element to remove by its pointer value.
There are some small performance gains to be had by doing this, but in the
general case, none of these lists are likely to be very large, so the
lookup was probably never that expensive anyway. However, some of the
calls are in fairly hot code paths, e.g process_equivalence(). So any
small gains there are useful.
Author: Zhijie Hou and David Rowley
Discussion: https://postgr.es/m/b3517353ec7c4f87aa560678fbb1034b@G08CNEXMBPEKD05.g08.fujitsu.local
Given a query with enough joins, it was possible that the query planner,
after multiplying the row estimates with the join selectivity that the
estimated number of rows would exceed the limits of the double data type
and become infinite.
To give an indication on how extreme a case is required to hit this, the
particular example case reported required 379 joins to a table without any
statistics, which resulted in the 1.0/DEFAULT_NUM_DISTINCT being used for
the join selectivity. This eventually caused the row estimates to go
infinite and resulted in an assert failure in initial_cost_mergejoin()
where the infinite row estimated was multiplied by an outerstartsel of 0.0
resulting in NaN. The failing assert verified that NaN <= Inf, which is
false.
To get around this we use clamp_row_est() to cap row estimates at a
maximum of 1e100. This value is thought to be low enough that costs
derived from it would remain within the bounds of what the double type can
represent.
Aside from fixing the failing Assert, this also has the added benefit of
making it so add_path() will still receive proper numerical values as
costs which will allow it to make more sane choices when determining the
cheaper path in extreme cases such as the one described above.
Additionally, we also get rid of the isnan() checks in the join costing
functions. The actual case which originally triggered those checks to be
added in the first place never made it to the mailing lists. It seems
likely that the new code being added to clamp_row_est() will result in
those becoming checks redundant, so just remove them.
The fairly harmless assert failure problem does also exist in the
backbranches, however, a more minimalistic fix will be applied there.
Reported-by: Onder Kalaci
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/DM6PR21MB1211FF360183BCA901B27F04D80B0@DM6PR21MB1211.namprd21.prod.outlook.com
This patch prevents crashes or wrong plans when partition-wise joins
are considered during GEQO planning, as a consequence of the
EquivalenceClass data structures becoming corrupt after a GEQO
context reset.
A remaining problem is that successive GEQO cycles will make multiple
copies of the required EC members, since add_child_join_rel_equivalences
has no idea that such members might exist already. For now we'll just
live with that. The lack of field complaints of crashes suggests that
this is a mighty little-used situation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/1683100.1601860653@sss.pgh.pa.us
get_eclass_for_sort_expr() computes expr_relids and nullable_relids
early on, even though they won't be needed unless we make a new
EquivalenceClass, which we often don't. Aside from the probably-minor
inefficiency, there's a memory management problem: these bitmapsets will
be built in the caller's context, leading to dangling pointers if that
is shorter-lived than root->planner_cxt. This would be a live bug if
get_eclass_for_sort_expr() could be called with create_it = true during
GEQO join planning. So far as I can find, the core code never does
that, but it's hard to be sure that no extensions do, especially since
the comments make it clear that that's supposed to be a supported case.
Fix by not computing these values until we've switched into planner_cxt
to build the new EquivalenceClass.
generate_join_implied_equalities() uses inner_rel->relids to look up
relevant eclasses, but it ought to be using nominal_inner_relids.
This is presently harmless because a child RelOptInfo will always have
exactly the same eclass_indexes as its topmost parent; but that might
not be true forever, and anyway it makes the code confusing.
The first of these is old (introduced by me in f3b3b8d5b), so back-patch
to all supported branches. The second only dates to v13, but we might
as well back-patch it to keep the code looking similar across branches.
Discussion: https://postgr.es/m/1508010.1601832581@sss.pgh.pa.us
Tomas Vondra observed that the IO behavior for HashAgg tends to be
worse than for Sort. Penalize HashAgg IO costs accordingly.
Also, account for the CPU effort of spilling the tuples and reading
them back.
Discussion: https://postgr.es/m/20200906212112.nzoy5ytrzjjodpfh@development
Reviewed-by: Tomas Vondra
Backpatch-through: 13
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
It's a bit inefficient to test if a Bitmapset is empty by counting all the
members and seeing if that number is zero. It's much better just to use
bms_is_empty(). Likewise for checking if there are at least two members,
just use bms_membership(), which does not need to do anything more after
finding two members.
Discussion: https://postgr.es/m/CAApHDvpvwm_QjbDOb5xga%2BKmX9XkN9xQavNGm3SvDbVnCYOerQ%40mail.gmail.com
Reviewed-by: Tomas Vondra
The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
Commit a477bfc1d fixed eval_const_expressions() to ensure that it
didn't generate unnecessary RelabelType nodes, but I failed to notice
that some other places in the planner had the same issue. Really
noplace in the planner should be using plain makeRelabelType(), for
fear of generating expressions that should be equal() to semantically
equivalent trees, but aren't.
An example is that because canonicalize_ec_expression() failed
to be careful about this, we could end up with an equivalence class
containing both a plain Const, and a Const-with-RelabelType
representing exactly the same value. So far as I can tell this led to
no visible misbehavior, but we did waste a bunch of cycles generating
and evaluating "Const = Const-with-RelabelType" to prove such entries
are redundant.
Hence, move the support function added by a477bfc1d to where it can
be more generally useful, and use it in the places where planner code
previously used makeRelabelType.
Back-patch to v12, like the previous patch. While I have no concrete
evidence of any real misbehavior here, it's certainly possible that
I overlooked a case where equivalent expressions that aren't equal()
could cause a user-visible problem. In any case carrying extra
RelabelType nodes through planning to execution isn't very desirable.
Discussion: https://postgr.es/m/1311836.1597781384@sss.pgh.pa.us
Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
reparameterize_path_by_child() failed to reparameterize BitmapAnd
and BitmapOr paths. This matters only if such a path is chosen as
the inside of a nestloop partition-wise join, where we have to pass
in parameters from the outside of the nestloop. If that did happen,
we generated a bad plan that would likely lead to crashes at execution.
This is not entirely reparameterize_path_by_child()'s fault though;
it's the victim of an ancient decision (my ancient decision, I think)
to not bother filling in param_info in BitmapAnd/Or path nodes. That
caused the function to believe that such nodes and their children
contain no parameter references and so need not be processed.
In hindsight that decision looks pretty penny-wise and pound-foolish:
while it saves a few cycles during path node setup, we do commonly
need the information later. In particular, by reversing the decision
and requiring valid param_info data in all nodes of a bitmap path
tree, we can get rid of indxpath.c's get_bitmap_tree_required_outer()
function, which computed the data on-demand. It's not unlikely that
that nets out as a savings of cycles in many scenarios. A couple
of other things in indxpath.c can be simplified as well.
While here, get rid of some cases in reparameterize_path_by_child()
that are visibly dead or useless, given that we only care about
reparameterizing paths that can be on the inside of a parameterized
nestloop. This case reminds one of the maxim that untested code
probably does not work, so I'm unwilling to leave unreachable code
in this function. (I did leave the T_Gather case in place even
though it's not reached in the regression tests. It's not very
clear to me when the planner might prefer to put Gather below
rather than above a nestloop, but at least in principle the case
might be interesting.)
Per bug #16536, originally from Arne Roland but with a test case
by Andrew Gierth. Back-patch to v11 where this code came in.
Discussion: https://postgr.es/m/16536-2213ee0b3aad41fd@postgresql.org
The qual pushdown logic assumed that all Vars in a restriction clause
must be Vars referencing subquery outputs; but since we introduced
LATERAL, it's possible for such a Var to be a lateral reference instead.
This led to an assertion failure in debug builds. In a non-debug
build, there might be no ill effects (if qual_is_pushdown_safe decided
the qual was unsafe anyway), or we could get failures later due to
construction of an invalid plan. I've not gone to much length to
characterize the possible failures, but at least segfaults in the
executor have been observed.
Given that this has been busted since 9.3 and it took this long for
anybody to notice, I judge that the case isn't worth going to great
lengths to optimize. Hence, fix by just teaching qual_is_pushdown_safe
that such quals are unsafe to push down, matching the previous behavior
when it accidentally didn't fail.
Per report from Tom Ellis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200713175124.GQ8220@cloudinit-builder
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
When estimating the number of pre-sorted groups in cost_incremental_sort
we must not pass Vars with varno 0 to estimate_num_groups, which would
cause failues in find_base_rel. This may happen when sorting output of
set operations, thanks to generate_append_tlist.
Unlike recurse_set_operations we can't easily access the original target
list, so if we find any Vars with varno 0, we fall back to the default
estimate DEFAULT_NUM_DISTINCT.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20200411214639.GK2228%40telsasoft.com
Previously, the partitionwise join technique only allowed partitionwise
join when input partitioned tables had exactly the same partition
bounds. This commit extends the technique to some cases when the tables
have different partition bounds, by using an advanced partition-matching
algorithm introduced by this commit. For both the input partitioned
tables, the algorithm checks whether every partition of one input
partitioned table only matches one partition of the other input
partitioned table at most, and vice versa. In such a case the join
between the tables can be broken down into joins between the matching
partitions, so the algorithm produces the pairs of the matching
partitions, plus the partition bounds for the join relation, to allow
partitionwise join for computing the join. Currently, the algorithm
works for list-partitioned and range-partitioned tables, but not
hash-partitioned tables. See comments in partition_bounds_merge().
Ashutosh Bapat and Etsuro Fujita, most of regression tests by Rajkumar
Raghuwanshi, some of the tests by Mark Dilger and Amul Sul, reviewed by
Dmitry Dolgov and Amul Sul, with additional review at various points by
Ashutosh Bapat, Mark Dilger, Robert Haas, Antonin Houska, Amit Langote,
Justin Pryzby, and Tomas Vondra
Discussion: https://postgr.es/m/CAFjFpRdjQvaUEV5DJX3TW6pU5eq54NCkadtxHX2JiJG_GvbrCA@mail.gmail.com
Commit d2d8a229bc introduced Incremental Sort, but it was considered
only in create_ordered_paths() as an alternative to regular Sort. There
are many other places that require sorted input and might benefit from
considering Incremental Sort too.
This patch modifies a number of those places, but not all. The concern
is that just adding Incremental Sort to any place that already adds
Sort may increase the number of paths considered, negatively affecting
planning time, without any benefit. So we've taken a more conservative
approach, based on analysis of which places do affect a set of queries
that did seem practical. This means some less common queries may not
benefit from Incremental Sort yet.
Author: Tomas Vondra
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Incremental Sort is an optimized variant of multikey sort for cases when
the input is already sorted by a prefix of the requested sort keys. For
example when the relation is already sorted by (key1, key2) and we need
to sort it by (key1, key2, key3) we can simply split the input rows into
groups having equal values in (key1, key2), and only sort/compare the
remaining column key3.
This has a number of benefits:
- Reduced memory consumption, because only a single group (determined by
values in the sorted prefix) needs to be kept in memory. This may also
eliminate the need to spill to disk.
- Lower startup cost, because Incremental Sort produce results after each
prefix group, which is beneficial for plans where startup cost matters
(like for example queries with LIMIT clause).
We consider both Sort and Incremental Sort, and decide based on costing.
The implemented algorithm operates in two different modes:
- Fetching a minimum number of tuples without check of equality on the
prefix keys, and sorting on all columns when safe.
- Fetching all tuples for a single prefix group and then sorting by
comparing only the remaining (non-prefix) keys.
We always start in the first mode, and employ a heuristic to switch into
the second mode if we believe it's beneficial - the goal is to minimize
the number of unnecessary comparions while keeping memory consumption
below work_mem.
This is a very old patch series. The idea was originally proposed by
Alexander Korotkov back in 2013, and then revived in 2017. In 2018 the
patch was taken over by James Coleman, who wrote and rewrote most of the
current code.
There were many reviewers/contributors since 2013 - I've done my best to
pick the most active ones, and listed them in this commit message.
Author: James Coleman, Alexander Korotkov
Reviewed-by: Tomas Vondra, Andreas Karlsson, Marti Raudsepp, Peter Geoghegan, Robert Haas, Thomas Munro, Antonin Houska, Andres Freund, Alexander Kuzmenkov
Discussion: https://postgr.es/m/CAPpHfdscOX5an71nHd8WSUH6GNOCf=V7wgDaTXdDd9=goN-gfA@mail.gmail.com
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
Move have_partkey_equi_join and match_expr_to_partition_keys to
relnode.c, since they're used only there. Refactor
build_joinrel_partition_info to split out the code that fills the
joinrel's partition key lists; this doesn't have any non-cosmetic
impact, but it seems like a useful separation of concerns.
Improve assorted nearby comments.
Amit Langote, with a little further editorialization by me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Commit d25ea0127 got rid of what I thought were entirely unnecessary
derived child expressions in EquivalenceClasses for EC members that
mention multiple baserels. But it turns out that some of the child
expressions that code created are necessary for partitionwise joins,
else we fail to find matching pathkeys for Sort nodes. (This happens
only for certain shapes of the resulting plan; it may be that
partitionwise aggregation is also necessary to show the failure,
though I'm not sure of that.)
Reverting that commit entirely would be quite painful performance-wise
for large partition sets. So instead, add code that explicitly
generates child expressions that match only partitionwise child join
rels we have actually generated.
Per report from Justin Pryzby. (Amit Langote noticed the problem
earlier, though it's not clear if he recognized then that it could
result in a planner error, not merely failure to exploit partitionwise
join, in the code as-committed.) Back-patch to v12 where commit
d25ea0127 came in.
Amit Langote, with lots of kibitzing from me
Discussion: https://postgr.es/m/CA+HiwqG2WVUGmLJqtR0tPFhniO=H=9qQ+Z3L_ZC+Y3-EVQHFGg@mail.gmail.com
Discussion: https://postgr.es/m/20191011143703.GN10470@telsasoft.com
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
3373c7155 changed how we determine EquivalenceClasses for relations and
added an Assert to ensure all relations mentioned in each EC's ec_relids
was a RELOPT_BASEREL. However, the join removal code may remove a LEFT
JOIN and since it does not clean up EC members belonging to the removed
relations it can leave RELOPT_DEADREL rels in ec_relids.
Fix this by adjusting the Assert to allow RELOPT_DEADREL rels too.
Reported-by: sqlsmith via Andreas Seltenreich
Discussion: https://postgr.es/m/87y30r8sls.fsf@ansel.ydns.eu
Previously in order to determine which ECs a relation had members in, we
had to loop over all ECs stored in PlannerInfo's eq_classes and check if
ec_relids mentioned the relation. For the most part, this was fine, as
generally, unless queries were fairly complex, the overhead of performing
the lookup would have not been that significant. However, when queries
contained large numbers of joins and ECs, the overhead to find the set of
classes matching a given set of relations could become a significant
portion of the overall planning effort.
Here we allow a much more efficient method to access the ECs which match a
given relation or set of relations. A new Bitmapset field in RelOptInfo
now exists to store the indexes into PlannerInfo's eq_classes list which
each relation is mentioned in. This allows very fast lookups to find all
ECs belonging to a single relation. When we need to lookup ECs belonging
to a given pair of relations, we can simply bitwise-AND the Bitmapsets from
each relation and use the result to perform the lookup.
We also take the opportunity to write a new implementation of
generate_join_implied_equalities which makes use of the new indexes.
generate_join_implied_equalities_for_ecs must remain as is as it can be
given a custom list of ECs, which we can't easily determine the indexes of.
This was originally intended to fix the performance penalty of looking up
foreign keys matching a join condition which was introduced by 100340e2d.
However, we're speeding up much more than just that here.
Author: David Rowley, Tom Lane
Reviewed-by: Tom Lane, Tomas Vondra
Discussion: https://postgr.es/m/6970.1545327857@sss.pgh.pa.us
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
WHERE EXISTS (...) queries cannot be executed by Parallel Hash Join
with jointype JOIN_UNIQUE_INNER, because there is no way to make a
partial plan totally unique. The consequence of allowing such plans
was duplicate results from some EXISTS queries.
Back-patch to 11. Bug #15857.
Author: Thomas Munro
Reviewed-by: Tom Lane
Reported-by: Vladimir Kriukov
Discussion: https://postgr.es/m/15857-d1ba2a64bce0795e%40postgresql.org
If an EquivalenceClass member expression includes variables from
multiple appendrels, then instead of producing one substituted
expression per child relation as intended, we'd create additional
child expressions for combinations of children of different appendrels.
This happened because the child expressions generated while considering
the first appendrel were taken as sources during substitution of the
second appendrel, and so on. The extra expressions are useless, and are
harmless unless there are too many of them --- but if you have several
appendrels with a thousand or so members each, it gets bad fast.
To fix, consider only original (non-em_is_child) EC members as candidates
to be expanded. This requires the ability to substitute directly from a
top parent relation's Vars to those of an indirect descendant relation,
but we already have that in adjust_appendrel_attrs_multilevel().
Per bug #15847 from Feike Steenbergen. This is a longstanding misbehavior,
but it's only worth worrying about when there are more appendrel children
than we've historically considered wise to use. So I'm not going to take
the risk of back-patching this.
Discussion: https://postgr.es/m/15847-ea3734094bf8ae61@postgresql.org
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
create_merge_append_plan failed to honor the CP_EXACT_TLIST flag:
it would generate the expected targetlist but then it felt free to
add resjunk sort targets to it. This demonstrably leads to assertion
failures in v11 and HEAD, and it's probably just accidental that we
don't see the same in older branches. I've not looked into whether
there would be any real-world consequences in non-assert builds.
In HEAD, create_append_plan has sprouted the same problem, so fix
that too (although we do not have any test cases that seem able to
reach that bug). This is an oversight in commit 3fc6e2d7f which
invented the CP_EXACT_TLIST flag, so back-patch to 9.6 where that
came in.
convert_subquery_pathkeys would create pathkeys for subquery output
values if they match any EquivalenceClass known in the outer query
and are available in the subquery's syntactic targetlist. However,
the second part of that condition is wrong, because such values might
not appear in the subquery relation's reltarget list, which would
mean that they couldn't be accessed above the level of the subquery
scan. We must check that they appear in the reltarget list, instead.
This can lead to dropping knowledge about the subquery's sort
ordering, but I believe it's okay, because any sort key that the
outer query actually has any interest in would appear in the
reltarget list.
This second issue is of very long standing, but right now there's no
evidence that it causes observable problems before 9.6, so I refrained
from back-patching further than that. We can revisit that choice if
somebody finds a way to make it cause problems in older branches.
(Developing useful test cases for these issues is really problematic;
fixing convert_subquery_pathkeys removes the only known way to exhibit
the create_merge_append_plan bug, and neither of the test cases added
by this patch causes a problem in all branches, even when considering
the issues separately.)
The second issue explains bug #15795 from Suresh Kumar R ("could not
find pathkey item to sort" with nested DISTINCT queries). I stumbled
across the first issue while investigating that.
Discussion: https://postgr.es/m/15795-fadb56c8e44ee73c@postgresql.org
join_is_legal() needs to reject forming certain outer joins in cases
where that would lead the planner down a blind alley. However, it
mistakenly supposed that the way to handle full joins was to treat them
as applying the same constraints as for left joins, only to both sides.
That doesn't work, as shown in bug #15741 from Anthony Skorski: given
a lateral reference out of a join that's fully enclosed by a full join,
the code would fail to believe that any join ordering is legal, resulting
in errors like "failed to build any N-way joins".
However, we don't really need to consider full joins at all for this
purpose, because we effectively force them to be evaluated in syntactic
order, and that order is always legal for lateral references. Hence,
get rid of this broken logic for full joins and just ignore them instead.
This seems to have been an oversight in commit 7e19db0c0.
Back-patch to all supported branches, as that was.
Discussion: https://postgr.es/m/15741-276f1f464b3f40eb@postgresql.org
If we need ordered output from a scan of a partitioned table, but
the ordering matches the partition ordering, then we don't need to
use a MergeAppend to combine the pre-ordered per-partition scan
results: a plain Append will produce the same results. This
both saves useless comparison work inside the MergeAppend proper,
and allows us to start returning tuples after istarting up just
the first child node not all of them.
However, all is not peaches and cream, because if some of the
child nodes have high startup costs then there will be big
discontinuities in the tuples-returned-versus-elapsed-time curve.
The planner's cost model cannot handle that (yet, anyway).
If we model the Append's startup cost as being just the first
child's startup cost, we may drastically underestimate the cost
of fetching slightly more tuples than are available from the first
child. Since we've had bad experiences with over-optimistic choices
of "fast start" plans for ORDER BY LIMIT queries, that seems scary.
As a klugy workaround, set the startup cost estimate for an ordered
Append to be the sum of its children's startup costs (as MergeAppend
would). This doesn't really describe reality, but it's less likely
to cause a bad plan choice than an underestimated startup cost would.
In practice, the cases where we really care about this optimization
will have child plans that are IndexScans with zero startup cost,
so that the overly conservative estimate is still just zero.
David Rowley, reviewed by Julien Rouhaud and Antonin Houska
Discussion: https://postgr.es/m/CAKJS1f-hAqhPLRk_RaSFTgYxd=Tz5hA7kQ2h4-DhJufQk8TGuw@mail.gmail.com
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
While trying to plan a partitionwise join, we may be faced with cases
where one or both input partitions for a particular segment of the join
have been pruned away. In HEAD and v11, this is problematic because
earlier processing didn't bother to make a pruned RelOptInfo fully
valid. With an upcoming patch to make partition pruning more efficient,
this'll be even more problematic because said RelOptInfo won't exist at
all.
The existing code attempts to deal with this by retroactively making the
RelOptInfo fully valid, but that causes crashes under GEQO because join
planning is done in a short-lived memory context. In v11 we could
probably have fixed this by switching to the planner's main context
while fixing up the RelOptInfo, but that idea doesn't scale well to the
upcoming patch. It would be better not to mess with the base-relation
data structures during join planning, anyway --- that's just a recipe
for order-of-operations bugs.
In many cases, though, we don't actually need the child RelOptInfo,
because if the input is certainly empty then the join segment's result
is certainly empty, so we can skip making a join plan altogether. (The
existing code ultimately arrives at the same conclusion, but only after
doing a lot more work.) This approach works except when the pruned-away
partition is on the nullable side of a LEFT, ANTI, or FULL join, and the
other side isn't pruned. But in those cases the existing code leaves a
lot to be desired anyway --- the correct output is just the result of
the unpruned side of the join, but we were emitting a useless outer join
against a dummy Result. Pending somebody writing code to handle that
more nicely, let's just abandon the partitionwise-join optimization in
such cases.
When the modified code skips making a join plan, it doesn't make a
join RelOptInfo either; this requires some upper-level code to
cope with nulls in part_rels[] arrays. We would have had to have
that anyway after the upcoming patch.
Back-patch to v11 since the crash is demonstrable there.
Discussion: https://postgr.es/m/8305.1553884377@sss.pgh.pa.us
Introduce a third extended statistic type, supported by the CREATE
STATISTICS command - MCV lists, a generalization of the statistic
already built and used for individual columns.
Compared to the already supported types (n-distinct coefficients and
functional dependencies), MCV lists are more complex, include column
values and allow estimation of much wider range of common clauses
(equality and inequality conditions, IS NULL, IS NOT NULL etc.).
Similarly to the other types, a new pseudo-type (pg_mcv_list) is used.
Author: Tomas Vondra
Reviewed-by: Dean Rasheed, David Rowley, Mark Dilger, Alvaro Herrera
Discussion: https://postgr.es/m/dfdac334-9cf2-2597-fb27-f0fb3753f435@2ndquadrant.com
Up to now, otherrel RelOptInfos were built at the same time as baserel
RelOptInfos, thanks to recursion in build_simple_rel(). However,
nothing in query_planner's preprocessing cares at all about otherrels,
only baserels, so we don't really need to build them until just before
we enter make_one_rel. This has two benefits:
* create_lateral_join_info did a lot of extra work to propagate
lateral-reference information from parents to the correct children.
But if we delay creation of the children till after that, it's
trivial (and much harder to break, too).
* Since we have all the restriction quals correctly assigned to
parent appendrels by this point, it'll be possible to do plan-time
pruning and never make child RelOptInfos at all for partitions that
can be pruned away. That's not done here, but will be later on.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
The assertions added by commits 34ea1ab7f et al found another problem:
set_dummy_rel_pathlist and mark_dummy_rel were failing to label
the dummy paths they create with the correct outer_relids, in case
the relation is necessarily parameterized due to having lateral
references in its tlist. It's likely that this has no user-visible
consequences in production builds, at the moment; but still an assertion
failure is a bad thing, so back-patch the fix.
Per bug #15694 from Roman Zharkov (via Alexander Lakhin)
and an independent report by Tushar Ahuja.
Discussion: https://postgr.es/m/15694-74f2ca97e7044f7f@postgresql.org
Discussion: https://postgr.es/m/7d72ab20-c725-3ce2-f99d-4e64dd8a0de6@enterprisedb.com
When we introduced separate ProjectSetPath nodes for application of
set-returning functions in v10, we inadvertently broke some cases where
we're supposed to recognize that the result of a subquery is known to be
empty (contain zero rows). That's because IS_DUMMY_REL was just looking
for a childless AppendPath without allowing for a ProjectSetPath being
possibly stuck on top. In itself, this didn't do anything much worse
than produce slightly worse plans for some corner cases.
Then in v11, commit 11cf92f6e rearranged things to allow the scan/join
targetlist to be applied directly to partial paths before they get
gathered. But it inserted a short-circuit path for dummy relations
that was a little too short: it failed to insert a ProjectSetPath node
at all for a targetlist containing set-returning functions, resulting in
bogus "set-valued function called in context that cannot accept a set"
errors, as reported in bug #15669 from Madelaine Thibaut.
The best way to fix this mess seems to be to reimplement IS_DUMMY_REL
so that it drills down through any ProjectSetPath nodes that might be
there (and it seems like we'd better allow for ProjectionPath as well).
While we're at it, make it look at rel->pathlist not cheapest_total_path,
so that it gives the right answer independently of whether set_cheapest
has been done lately. That dependency looks pretty shaky in the context
of code like apply_scanjoin_target_to_paths, and even if it's not broken
today it'd certainly bite us at some point. (Nastily, unsafe use of the
old coding would almost always work; the hazard comes down to possibly
looking through a dangling pointer, and only once in a blue moon would
you find something there that resulted in the wrong answer.)
It now looks like it was a mistake for IS_DUMMY_REL to be a macro: if
there are any extensions using it, they'll continue to use the old
inadequate logic until they're recompiled, after which they'll fail
to load into server versions predating this fix. Hopefully there are
few such extensions.
Having fixed IS_DUMMY_REL, the special path for dummy rels in
apply_scanjoin_target_to_paths is unnecessary as well as being wrong,
so we can just drop it.
Also change a few places that were testing for partitioned-ness of a
planner relation but not using IS_PARTITIONED_REL for the purpose; that
seems unsafe as well as inconsistent, plus it required an ugly hack in
apply_scanjoin_target_to_paths.
In passing, save a few cycles in apply_scanjoin_target_to_paths by
skipping processing of pre-existing paths for partitioned rels,
and do some cosmetic cleanup and comment adjustment in that function.
I renamed IS_DUMMY_PATH to IS_DUMMY_APPEND with the intention of breaking
any code that might be using it, since in almost every case that would
be wrong; IS_DUMMY_REL is what to be using instead.
In HEAD, also make set_dummy_rel_pathlist static (since it's no longer
used from outside allpaths.c), and delete is_dummy_plan, since it's no
longer used anywhere.
Back-patch as appropriate into v11 and v10.
Tom Lane and Julien Rouhaud
Discussion: https://postgr.es/m/15669-02fb3296cca26203@postgresql.org
Check ec_relids before bothering to iterate through the EC members.
On a perhaps extreme, but still real-world, query in which
match_eclasses_to_foreign_key_col() accounts for the bulk of the
planner's runtime, this saves nearly 40% of the runtime. It's a bit
of a stopgap fix, but it's simple enough to be back-patched to 9.6
where this code came in; so let's do that.
David Rowley
Discussion: https://postgr.es/m/6970.1545327857@sss.pgh.pa.us
In commit 1a8d5afb0, I thought it'd be a good idea to define
IndexClause.indexquals as NIL in the most common case where the given
clause (IndexClause.rinfo) is usable exactly as-is. It'd be more
consistent to define the indexquals in that case as being a one-element
list containing IndexClause.rinfo, but I thought saving the palloc
overhead for making such a list would be worthwhile.
In hindsight, that was a great example of "premature optimization is the
root of all evil": it's complicated everyplace that needs to deal with
the indexquals, requiring duplicative code to handle both the simple
case and the not-simple case. I'd initially found that tolerable but
it's getting less so as I mop up some areas that I'd not touched in
1a8d5afb0. In any case, two more pallocs during a planner run are
surely at the noise level (a conclusion confirmed by a bit of
microbenchmarking). So let's change this decision before it becomes
set in stone, and insist that IndexClause.indexquals always be a valid
list of the actual index quals for the clause.
Discussion: https://postgr.es/m/24586.1550106354@sss.pgh.pa.us
We're only going to consider key columns when creating indexquals,
so there is no point in having the outer loops in indxpath.c iterate
further than nkeycolumns.
Doing so in match_pathkeys_to_index() is actually wrong, and would have
caused crashes by now, except that we have no index AMs supporting both
amcanorderbyop and amcaninclude.
It's also wrong in relation_has_unique_index_for(). The effect there is
to fail to prove uniqueness even when the index does prove it, if there
are extra columns.
Also future-proof examine_variable() for the day when extra columns can
be expressions, and fix what's either a thinko or just an oversight in
btcostestimate(): we should consider the number of key columns, not the
total, when deciding whether to derate correlation.
None of these things seemed important enough to risk changing in a
just-before-wrap patch, but since we're past the release wrap window,
time to fix 'em.
Discussion: https://postgr.es/m/25526.1549847928@sss.pgh.pa.us
For a long time, indxpath.c has had the ability to extract derived (lossy)
index conditions from certain operators such as LIKE. For just as long,
it's been obvious that we really ought to make that capability available
to extensions. This commit finally accomplishes that, by adding another
API for planner support functions that lets them create derived index
conditions for their functions. As proof of concept, the hardwired
"special index operator" code formerly present in indxpath.c is pushed
out to planner support functions attached to LIKE and other relevant
operators.
A weak spot in this design is that an extension needs to know OIDs for
the operators, datatypes, and opfamilies involved in the transformation
it wants to make. The core-code prototypes use hard-wired OID references
but extensions don't have that option for their own operators etc. It's
usually possible to look up the required info, but that may be slow and
inconvenient. However, improving that situation is a separate task.
I want to do some additional refactorization around selfuncs.c, but
that also seems like a separate task.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
indxpath.c needs a good deal more attention for covering indexes than
it's gotten. But so far as I can tell, the only really awful breakage
is in expand_indexqual_rowcompare (nee adjust_rowcompare_for_index),
which was only half fixed in c266ed31a. The other problems aren't
bad enough to take the risk of a just-before-wrap fix.
The problem here is that if the leading column of a row comparison
matches an index (allowing this code to be reached), and some later
column doesn't match the index, it'll nonetheless believe that that
column matches the first included index column. Typically that'll
lead to an error like "operator M is not a member of opfamily N" as
a result of fetching a garbage opfamily OID. But with enough bad
luck, maybe a broken plan would be generated.
Discussion: https://postgr.es/m/25526.1549847928@sss.pgh.pa.us
Add support function requests for estimating the selectivity, cost,
and number of result rows (if a SRF) of the target function.
The lack of a way to estimate selectivity of a boolean-returning
function in WHERE has been a recognized deficiency of the planner
since Berkeley days. This commit finally fixes it.
In addition, non-constant estimates of cost and number of output
rows are now possible. We still fall back to looking at procost
and prorows if the support function doesn't service the request,
of course.
To make concrete use of the possibility of estimating output rowcount
for SRFs, this commit adds support functions for array_unnest(anyarray)
and the integer variants of generate_series; the lack of plausible
rowcount estimates for those, even when it's obvious to a human,
has been a repeated subject of complaints. Obviously, much more
could now be done in this line, but I'm mostly just trying to get
the infrastructure in place.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
In place of three separate but interrelated lists (indexclauses,
indexquals, and indexqualcols), an IndexPath now has one list
"indexclauses" of IndexClause nodes. This holds basically the same
information as before, but in a more useful format: in particular, there
is now a clear connection between an indexclause (an original restriction
clause from WHERE or JOIN/ON) and the indexquals (directly usable index
conditions) derived from it.
We also change the ground rules a bit by mandating that clause commutation,
if needed, be done up-front so that what is stored in the indexquals list
is always directly usable as an index condition. This gets rid of repeated
re-determination of which side of the clause is the indexkey during costing
and plan generation, as well as repeated lookups of the commutator
operator. To minimize the added up-front cost, the typical case of
commuting a plain OpExpr is handled by a new special-purpose function
commute_restrictinfo(). For RowCompareExprs, generating the new clause
properly commuted to begin with is not really any more complex than before,
it's just different --- and we can save doing that work twice, as the
pretty-klugy original implementation did.
Tracking the connection between original and derived clauses lets us
also track explicitly whether the derived clauses are an exact or lossy
translation of the original. This provides a cheap solution to getting
rid of unnecessary rechecks of boolean index clauses, which previously
seemed like it'd be more expensive than it was worth.
Another pleasant (IMO) side-effect is that EXPLAIN now always shows
index clauses with the indexkey on the left; this seems less confusing.
This commit leaves expand_indexqual_conditions() and some related
functions in a slightly messy state. I didn't bother to change them
any more than minimally necessary to work with the new data structure,
because all that code is going to be refactored out of existence in
a follow-on patch.
Discussion: https://postgr.es/m/22182.1549124950@sss.pgh.pa.us
The previous ordering of these steps satisfied the nominal requirement
that set_rel_pathlist_hook could editorialize on the whole set of Paths
constructed for a base relation. In practice, though, trying to change
the set of partial paths was impossible. Adding one didn't work because
(a) it was too late to be included in Gather paths made by the core code,
and (b) calling add_partial_path after generate_gather_paths is unsafe,
because it might try to delete a path it thinks is dominated, but that
is already embedded in some Gather path(s). Nor could the hook safely
remove partial paths, for the same reason that they might already be
embedded in Gathers.
Better to call extensions first, let them add partial paths as desired,
and then gather. In v11 and up, we already doubled down on that ordering
by postponing gathering even further for single-relation queries; so even
if the hook wished to editorialize on Gather path construction, it could
not.
Report and patch by KaiGai Kohei. Back-patch to 9.6 where Gather paths
were added.
Discussion: https://postgr.es/m/CAOP8fzahwpKJRTVVTqo2AE=mDTz_efVzV6Get_0=U3SO+-ha1A@mail.gmail.com
An upcoming patch which changes how inheritance planning works requires
adding a new function that does a similar job to set_append_rel_size() but
for child target relations. To save it from having to duplicate the qual
building code, move that to a separate function first.
Here we also change things so that we never attempt to build security quals
after detecting some const false child quals. We needlessly used to do this
just before we marked the child relation as a dummy rel.
In passing, this also moves the partition pruned check to before the qual
building code. We don't need to build the child quals before we check if
the partition has been pruned.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_i+jrrD+if8qC7KPuTAAWsd=dtepgY_7u=P86GDEwm7A@mail.gmail.com
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Discussion: https://postgr.es/m/7719.1548688728@sss.pgh.pa.us
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
Move a few very simple node-creation and node-type-testing functions
from the planner's clauses.c to nodes/makefuncs and nodes/nodeFuncs.
There's nothing planner-specific about them, as evidenced by the
number of other places that were using them.
While at it, rename and_clause() etc to is_andclause() etc, to clarify
that they are node-type-testing functions not node-creation functions.
And use "static inline" implementations for the shortest ones.
Also, modify flatten_join_alias_vars() and some subsidiary functions
to take a Query not a PlannerInfo to define the join structure that
Vars should be translated according to. They were only using the
"parse" field of the PlannerInfo anyway, so this just requires removing
one level of indirection. The advantage is that now parse_agg.c can
use flatten_join_alias_vars() without the horrid kluge of creating an
incomplete PlannerInfo, which will allow that file to be decoupled from
relation.h in a subsequent patch.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
Previously, in set_append_rel_size(), we generated tlists and EC members
for dummy children for possible use by partition-wise join, even if
partition-wise join was disabled or the top parent was not a partitioned
table, but adding such EC members causes noticeable planning speed
degradation for queries with certain kinds of join quals like
"(foo.x + bar.y) = constant" where foo and bar are partitioned tables in
cases where there are lots of dummy children, as the EC members lists
grow huge, especially for the ECs derived from such join quals, which
makes the search for the parent EC members in add_child_rel_equivalences()
very time-consuming. Postpone the work until such children are actually
involved in a partition-wise join.
Reported-by: Sanyo Capobiango
Analyzed-by: Justin Pryzby and Alvaro Herrera
Author: Amit Langote, with a few additional changes by me
Reviewed-by: Ashutosh Bapat
Backpatch-through: v11 where partition-wise join was added
Discussion: https://postgr.es/m/CAO698qZnrxoZu7MEtfiJmpmUtz3AVYFVnwzR%2BpqjF%3DrmKBTgpw%40mail.gmail.com
This commit moves expand_inherited_tables and underlings from
optimizer/prep/prepunionc.c to optimizer/utils/inherit.c.
Also, all of the AppendRelInfo-based expression manipulation routines
are moved to optimizer/utils/appendinfo.c.
No functional code changes. One exception is the introduction of
make_append_rel_info, but that's still just moving around code.
Also, stop including <limits.h> in prepunion.c, which no longer needs
it since 3fc6e2d7f5. I (Álvaro) noticed this because Amit was copying
that to inherit.c, which likewise doesn't need it.
Author: Amit Langote
Discussion: https://postgr.es/m/3be67028-a00a-502c-199a-da00eec8fb6e@lab.ntt.co.jp
While rearranging code in tidpath.c, I overlooked the fact that we ought
to check restriction_is_securely_promotable when trying to use a join
clause as a TID qual. Since tideq itself is leakproof, this wouldn't
really allow any interesting leak AFAICT, but it still seems like we
had better check it.
For consistency with the corresponding logic in indxpath.c, also
check rinfo->pseudoconstant. I'm not sure right now that it's
possible for that to be set in a join clause, but if it were,
a match couldn't be made anyway.
Up to now we've not worried much about joins where the join key is a
relation's CTID column, reasoning that storing a table's CTIDs in some
other table would be pretty useless. However, there are use-cases for
this sort of query involving self-joins, so that argument doesn't really
hold water.
This patch allows generating plans for joins on CTID that use a nestloop
with inner TidScan, similar to what we might do with an index on the join
column. This is the most efficient way to join when the outer side of
the nestloop is expected to yield relatively few rows.
This change requires upgrading tidpath.c and the generated TidPaths
to work with RestrictInfos instead of bare qual clauses, but that's
long-postponed technical debt anyway.
Discussion: https://postgr.es/m/17443.1545435266@sss.pgh.pa.us
Now that name comparison has effectively the same behavior as text
comparison, we might as well merge the name_ops opfamily into text_ops,
allowing cross-type comparisons to be processed without forcing a
datatype coercion first. We need do little more than add cross-type
operators to make the opfamily complete, and fix one or two places
in the planner that assumed text_ops was a single-datatype opfamily.
I chose to unify hash name_ops into hash text_ops as well, since the
types have compatible hashing semantics. This allows marking the
new cross-type equality operators as oprcanhash.
(Note: this doesn't remove the name_ops opclasses, so there's no
breakage of index definitions. Those opclasses are just reparented
into the text_ops opfamily.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
The "name" comparison operators now all support collations, making them
functionally equivalent to "text" comparisons, except for the different
physical representation of the datatype. They do, in fact, mostly share
the varstr_cmp and varstr_sortsupport infrastructure, which has been
slightly enlarged to handle the case.
To avoid changes in the default behavior of the datatype, set name's
typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that
by default comparisons to a name value will continue to use strcmp
semantics. (This would have been the case for system catalog columns
anyway, because of commit 6b0faf723, but doing this makes it true for
user-created name columns as well. In particular, this avoids
locale-dependent changes in our regression test results.)
In consequence, tweak a couple of places that made assumptions about
collatable base types always having typcollation DEFAULT_COLLATION_OID.
I have not, however, attempted to relax the restriction that user-
defined collatable types must have that. Hence, "name" doesn't
behave quite like a user-defined type; it acts more like a domain
with COLLATE "C". (Conceivably, if we ever get rid of the need for
catalog name columns to be fixed-length, "name" could actually become
such a domain over text. But that'd be a pretty massive undertaking,
and I'm not volunteering.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
"rescanratio" was computed as 1 + rescanned-tuples / total-inner-tuples,
which is sensible if it's to be multiplied by total-inner-tuples or a cost
value corresponding to scanning all the inner tuples. But in reality it
was (mostly) multiplied by inner_rows or a related cost, numbers that take
into account the possibility of stopping short of scanning the whole inner
relation thanks to a limited key range in the outer relation. This'd
still make sense if we could expect that stopping short would result in a
proportional decrease in the number of tuples that have to be rescanned.
It does not, however. The argument that establishes the validity of our
estimate for that number is independent of whether we scan all of the inner
relation or stop short, and experimentation also shows that stopping short
doesn't reduce the number of rescanned tuples. So the correct calculation
is 1 + rescanned-tuples / inner_rows, and we should be sure to multiply
that by inner_rows or a corresponding cost value.
Most of the time this doesn't make much difference, but if we have
both a high rescan rate (due to lots of duplicate values) and an outer
key range much smaller than the inner key range, then the error can
be significant, leading to a large underestimate of the cost associated
with rescanning.
Per report from Vijaykumar Jain. This thinko appears to go all the way
back to the introduction of the rescan estimation logic in commit
70fba7043, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CAE7uO5hMb_TZYJcZmLAgO6iD68AkEK6qCe7i=vZUkCpoKns+EQ@mail.gmail.com
classify_index_clause_usage() is O(N^2) in the number of distinct index
qual clauses it considers, because of its use of a simple search list to
store them. For nearly all queries, that's fine because only a few clauses
will be considered. But Alexander Kuzmenkov reported a machine-generated
query with 80000 (!) index qual clauses, which caused this code to take
forever. Somewhat remarkably, this is the only O(N^2) behavior we now
have for such a query, so let's fix it.
We can get rid of the O(N^2) runtime for cases like this without much
damage to the functionality of choose_bitmap_and() by separating out
paths with "too many" qual or pred clauses, and deeming them to always
be nonredundant with other paths. Then their clauses needn't go into
the search list, so it doesn't get too long, but we don't lose the
ability to consider bitmap AND plans altogether. I set the threshold
for "too many" to be 100 clauses per path, which should be plenty to
ensure no change in planning behavior for normal queries.
There are other things we could do to make this go faster, but it's not
clear that it's worth any additional effort. 80000 qual clauses require
a whole lot of work in many other places, too.
The code's been like this for a long time, so back-patch to all supported
branches. The troublesome query only works back to 9.5 (in 9.4 it fails
with stack overflow in the parser); so I'm not sure that fixing this in
9.4 has any real-world benefit, but perhaps it does.
Discussion: https://postgr.es/m/90c5bdfa-d633-dabe-9889-3cf3e1acd443@postgrespro.ru
The planner doesn't make any use of root->total_table_pages until it
estimates costs of indexscans, so we don't need to compute it as
early as that's currently done. By doing the calculation between
set_base_rel_sizes and set_base_rel_pathlists, we can omit relations
that get removed from the query by partition pruning or constraint
exclusion, which seems like a more accurate basis for costing.
(Historical note: I think at the time this code was written, there
was not a separation between the "set sizes" and "set pathlists"
steps, so that this approach would have been impossible at the time.
But now that we have that separation, this is clearly the better way
to do things.)
David Rowley, reviewed by Edmund Horner
Discussion: https://postgr.es/m/CAKJS1f-NG1mRM0VOtkAG7=ZLQWihoqees9R4ki3CKBB0-fRfCA@mail.gmail.com
Allowing sub-select containing LIMIT/OFFSET in workers can lead to
inconsistent results at the top-level as there is no guarantee that the
row order will be fully deterministic. The fix is to prohibit pushing
LIMIT/OFFSET within sub-selects to workers.
Reported-by: Andrew Fletcher
Bug: 15324
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Backpatch-through: 9.6
Discussion: https://postgr.es/m/153417684333.10284.11356259990921828616@wrigleys.postgresql.org
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Discussion: https://postgr.es/m/CAKcux6ktu-8tefLWtQuuZBYFaZA83vUzuRd7c1YHC-yEWyYFpg@mail.gmail.com
The previous coding here supposed that if run-time partitioning applied to
a particular Append/MergeAppend plan, then all child plans of that node
must be members of a single partitioning hierarchy. This is totally wrong,
since an Append could be formed from a UNION ALL: we could have multiple
hierarchies sharing the same Append, or child plans that aren't part of any
hierarchy.
To fix, restructure the related plan-time and execution-time data
structures so that we can have a separate list or array for each
partitioning hierarchy. Also track subplans that are not part of any
hierarchy, and make sure they don't get pruned.
Per reports from Phil Florent and others. Back-patch to v11, since
the bug originated there.
David Rowley, with a lot of cosmetic adjustments by me; thanks also
to Amit Langote for review.
Discussion: https://postgr.es/m/HE1PR03MB17068BB27404C90B5B788BCABA7B0@HE1PR03MB1706.eurprd03.prod.outlook.com
GatherMergePath (introduced in 10) and CustomPath (introduced in 9.5)
have gone missing. The order of the Path nodes was inconsistent with
what is listed in nodes.h, so make the order consistent at the same time
to ease future checks and additions.
Author: Sawada Masahiko
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBQMLoc=ohH-oocuAPsELrmk8_EsRJjOyR8FQLZkbE0wA@mail.gmail.com
In final_cost_hashjoin(), commit 9c7f5229a allowed inner_unique cases
to follow a code path previously used only for SEMI/ANTI joins; but it
neglected to fix an if-test within that path that assumed SEMI and ANTI
were the only possible cases. This resulted in a wrong value for
hashjointuples, and an ensuing bad cost estimate, for inner_unique normal
joins. Fortunately, for inner_unique normal joins we can assume the number
of joined tuples is the same as for a SEMI join; so there's no need for
more code, we just have to invert the test to check for ANTI not SEMI.
It turns out that in two contrib tests in which commit 9c7f5229a
changed the plan expected for a query, the change was actually wrong
and induced by this estimation error, not by any real improvement.
Hence this patch also reverts those changes.
Per report from RK Korlapati. Backpatch to v10 where the error was
introduced.
David Rowley
Discussion: https://postgr.es/m/CA+SNy03bhq0fodsfOkeWDCreNjJVjsdHwUsb7AG=jpe0PtZc_g@mail.gmail.com
We include <float.h> in every place that needs isnan(), because MSVC
used to require it. However, since MSVC 2013 that's no longer necessary
(cf. commit cec8394b5c), so we can retire the inclusion to a
version-specific stanza in win32_port.h, where it doesn't need to
pollute random .c files. The header is of course still needed in a few
places for other reasons.
I (Álvaro) removed float.h from a few more files than in Emre's original
patch. This doesn't break the build in my system, but we'll see what
the buildfarm has to say about it all.
Author: Emre Hasegeli
Discussion: https://postgr.es/m/CAE2gYzyc0+5uG+Cd9-BSL7NKC8LSHLNg1Aq2=8ubjnUwut4_iw@mail.gmail.com
Commit ab72716778 allowed Parallel Append paths to be generated for a
relation that is not parallel safe. Prevent that from happening.
Initial analysis by Tom Lane.
Reported-by: Rajkumar Raghuwanshi
Author: Amit Kapila and Rajkumar Raghuwanshi
Reviewed-by: Amit Khandekar and Robert Haas
Discussion:https://postgr.es/m/CAKcux6=tPJ6nJ08r__nU_pmLQiC0xY15Fn0HvG1Cprsjdd9s_Q@mail.gmail.com
Bruce Momjian
Tomas Vondra
Dean Rasheed
Heikki Linnakangas
Michael Paquier
David Rowley
Tom Lane
Jeff Davis
Peter Geoghegan
Andres Freund
Peter Eisentraut
Etsuro Fujita
Amit Kapila
Alvaro Herrera
Thomas Munro