Add a few words of comment to explain why SIGURG doesn't follow the
dummy_handler pattern used for SIGUSR2, since that might otherwise
appear to be a bug.
Discussion: https://postgr.es/m/4006115.1618577212%40sss.pgh.pa.us
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
When commit 0827e8af70 added auto-analyze support for partitioned
tables, it included code to obtain reltuples for the partitioned table
as a number of catalog accesses to read pg_class.reltuples for each
partition. That's not only very inefficient, but also problematic
because autovacuum doesn't hold any locks on any of those tables -- and
doesn't want to. Replace that code with a read of pg_class.reltuples
for the partitioned table, and make sure ANALYZE and TRUNCATE properly
maintain that value.
I found no code that would be affected by the change of relpages from
zero to non-zero for partitioned tables, and no other code that should
be maintaining it, but if there is, hopefully it'll be an easy fix.
Per buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/1823909.1617862590@sss.pgh.pa.us
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Previously, autovacuum would completely ignore partitioned tables, which
is not good regarding analyze -- failing to analyze those tables means
poor plans may be chosen. Make autovacuum aware of those tables by
propagating "changes since analyze" counts from the leaf partitions up
the partitioning hierarchy.
This also introduces necessary reloptions support for partitioned tables
(autovacuum_enabled, autovacuum_analyze_scale_factor,
autovacuum_analyze_threshold). It's unclear how best to document this
aspect.
Author: Yuzuko Hosoya <yuzukohosoya@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CAKkQ508_PwVgwJyBY=0Lmkz90j8CmWNPUxgHvCUwGhMrouz6UA@mail.gmail.com
Maxim Orlov reported that the shutdown of standby server could result in
the following assertion failure. The cause of this issue was that,
when the shutdown caused the startup process to exit, recovery-time
transaction tracking was not shut down even if it's already initialized,
and some locks the tracked transactions were holding could not be released.
At this situation, if other process was invoked and the PGPROC entry that
the startup process used was assigned to it, it found such unreleased locks
and caused the assertion failure, during the initialization of it.
TRAP: FailedAssertion("SHMQueueEmpty(&(MyProc->myProcLocks[i]))"
This commit fixes this issue by making the startup process shut down
transaction tracking and release all locks, at the exit of it.
Back-patch to all supported branches.
Reported-by: Maxim Orlov
Author: Fujii Masao
Reviewed-by: Maxim Orlov
Discussion: https://postgr.es/m/ad4ce692cc1d89a093b471ab1d969b0b@postgrespro.ru
Backend status (supporting pg_stat_activity) and command
progress (supporting pg_stat_progress*) related code is largely
independent from the rest of pgstat.[ch] (supporting views like
pg_stat_all_tables that accumulate data over time). See also
a333476b92.
This commit doesn't rename the function names to make the distinction
from the rest of pgstat_ clearer - that'd be more invasive and not
clearly beneficial. If we were to decide to do such a rename at some
point, it's better done separately from moving the code as well.
Robert's review was of an earlier version.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The wait event related code is independent from the rest of the
pgstat.[ch] code, of nontrivial size and changes on a regular
basis. Put it into its own set of files.
As there doesn't seem to be a good pre-existing directory for code
like this, add src/backend/utils/activity.
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20210316195440.twxmlov24rr2nxrg@alap3.anarazel.de
The caller of pgstat_report_replslot() passes int64 values to the function.
Also the function stores those values in PgStat_Counter (i.e., int64) fields
of PgStat_MsgReplSlot struct. But previously the function used "int" as
the data types of some arguments for those values, which could lead to
the overflow of values.
To avoid this risk, this commit fixes pgstat_report_replslot() to use
PgStat_Counter type for the arguments. Since they are the statistics counters,
PgStat_Counter, the data type used for counters, is used for them
instead of int64.
Reported-by: Vignesh C
Author: Vignesh C
Reviewed-by: Jeevan Ladhe, Fujii Masao
Discussion: https://postgr.es/m/CALDaNm080OpG=ZwOb0i8EyChH5SyHAMFWJCKaKTXmrfvJLbgaA@mail.gmail.com
This implements asynchronous execution, which runs multiple parts of a
non-parallel-aware Append concurrently rather than serially to improve
performance when possible. Currently, the only node type that can be
run concurrently is a ForeignScan that is an immediate child of such an
Append. In the case where such ForeignScans access data on different
remote servers, this would run those ForeignScans concurrently, and
overlap the remote operations to be performed simultaneously, so it'll
improve the performance especially when the operations involve
time-consuming ones such as remote join and remote aggregation.
We may extend this to other node types such as joins or aggregates over
ForeignScans in the future.
This also adds the support for postgres_fdw, which is enabled by the
table-level/server-level option "async_capable". The default is false.
Robert Haas, Kyotaro Horiguchi, Thomas Munro, and myself. This commit
is mostly based on the patch proposed by Robert Haas, but also uses
stuff from the patch proposed by Kyotaro Horiguchi and from the patch
proposed by Thomas Munro. Reviewed by Kyotaro Horiguchi, Konstantin
Knizhnik, Andrey Lepikhov, Movead Li, Thomas Munro, Justin Pryzby, and
others.
Discussion: https://postgr.es/m/CA%2BTgmoaXQEt4tZ03FtQhnzeDEMzBck%2BLrni0UWHVVgOTnA6C1w%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKGLBRyu0rHrDCMC4%3DRn3252gogyp1SjOgG8SEKKZv%3DFwfQ%40mail.gmail.com
Discussion: https://postgr.es/m/20200228.170650.667613673625155850.horikyota.ntt%40gmail.com
Previously when an archive recovery or a standby was starting and
reached the consistent recovery state but hot_standby was configured
to off, the error message when a client connectted was "the database
system is starting up", which was needless confusing and not really
all that accurate either.
This commit improves the connection denied error message during
recovery, as follows, so that the users immediately know that their
servers are configured to deny those connections.
- If hot_standby is disabled, the error message "the database system
is not accepting connections" and the detail message "Hot standby
mode is disabled." are output when clients connect while an archive
recovery or a standby is running.
- If hot_standby is enabled, the error message "the database system
is not yet accepting connections" and the detail message
"Consistent recovery state has not been yet reached." are output
when clients connect until the consistent recovery state is reached
and postmaster starts accepting read only connections.
This commit doesn't change the connection denied error message of
"the database system is starting up" during normal server startup and
crash recovery. Because it's still suitable for those situations.
Author: James Coleman
Reviewed-by: Alvaro Herrera, Andres Freund, David Zhang, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAAaqYe8h5ES_B=F_zDT+Nj9XU7YEwNhKhHA2RE4CFhAQ93hfig@mail.gmail.com
Common recommendations are that the checkpoint should be spread out as
much as possible, provided we avoid having it take too long. This
change updates the default to 0.9 (from 0.5) to match that
recommendation.
There was some debate about possibly removing the option entirely but it
seems there may be some corner-cases where having it set much lower to
try to force the checkpoint to be as fast as possible could result in
fewer periods of time of reduced performance due to kernel flushing.
General agreement is that the "spread more" is the preferred approach
though and those who need to tune away from that value are much less
common.
Reviewed-By: Michael Paquier, Peter Eisentraut, Tom Lane, David Steele,
Nathan Bossart
Discussion: https://postgr.es/m/20201207175329.GM16415%40tamriel.snowman.net
Commit de829ddf23 added wait event WalrcvExit. But its name is not
consistent with other wait events like WalReceiverMain or
WalReceiverWaitStart, etc. So this commit renames WalrcvExit to
WalReceiverExit.
Author: Fujii Masao
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/cced9995-8fa2-7b22-9d91-3f22a2b8c23c@oss.nttdata.com
Previously the type of this wait event was Client. But while this
wait event is being reported, walreceiver process is waiting for
the startup process to set initial data for streaming replication.
It's not waiting for any activity on a socket connected to a user
application or walsender. So this commit changes the type for
WalReceiverWaitStart wait event to IPC.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/cdacc27c-37ff-f1a4-20e2-ce19933abfcc@oss.nttdata.com
Commit 86c23a6eb2 changed the option to specify that postgres will
stop all other server processes by sending the signal SIGSTOP,
from -s to -T. But previously there were comments incorrectly
explaining that SIGSTOP behavior is set by -s option. This commit
fixes them.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20210316.165141.1400441966284654043.horikyota.ntt@gmail.com
After a crash of a backend using temporary files, the files used to be
left behind, on the basis that it might be useful for debugging. But we
don't have any reports of anyone actually doing that, and it means the
disk usage may grow over time due to repeated backend failures (possibly
even hitting ENOSPC). So this behavior is a bit unfortunate, and fixing
it required either manual cleanup (deleting files, which is error-prone)
or restart of the instance (i.e. service disruption).
This implements automatic cleanup of temporary files, controled by a new
GUC remove_temp_files_after_crash. By default the files are removed, but
it can be disabled to restore the old behavior if needed.
Author: Euler Taveira
Reviewed-by: Tomas Vondra, Michael Paquier, Anastasia Lubennikova, Thomas Munro
Discussion: https://postgr.es/m/CAH503wDKdYzyq7U-QJqGn%3DGm6XmoK%2B6_6xTJ-Yn5WSvoHLY1Ww%40mail.gmail.com
When accessing replication slot stats, introduced in 9868167500,
pgstat_read_statsfiles() reads the data into newly allocated
memory. Unfortunately the current memory context at that point is the
callers, leading to leaks and use-after-free dangers.
The fix is trivial, explicitly use pgStatLocalContext. There's some
potential for further improvements, but that's outside of the scope of
this bugfix.
No backpatch necessary, feature is only in HEAD.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20210317230447.c7uc4g3vbs4wi32i@alap3.anarazel.de
Commit 3048898e dropped -ING from some wait event names that correspond
to barrier phases. Update the phases' names to match.
While we're here making cosmetic changes, also rename "DONE" to "FREE".
That pairs better with "ALLOCATE", and describes the activity that
actually happens in that phase (as we do for the other phases) rather
than describing a state. The distinction is clearer after bugfix commit
3b8981b6 split the phase into two. As for the growth barriers, rename
their "ALLOCATE" phase to "REALLOCATE", which is probably a better
description of what happens then. Also improve the comments about
the phases a bit.
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
Since commits 9f095299 and f98b8476 we don't poll the postmaster
pipe at all during crash recovery on Linux and FreeBSD, but on other
operating systems we were still doing it for every WAL record. Do it
less frequently on operating systems where system calls are required, at
the cost of delaying exit a bit after postmaster death. This avoids
expensive system calls reported to slow down CPU-bound recovery by as
much as 10-30%.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com
Discussion: https://postgr.es/m/7261eb39-0369-f2f4-1bb5-62f3b6083b5e@iki.fi
When shutdown is requested, checkpointer performs checkpoint or
restartpoint, and updates the statistics, before it exits. But previously
checkpointer didn't send those statistics to the stats collector.
Shutdown checkpoint and restartpoint are treated as requested ones
instead of scheduled ones, so the number of them are counted in
pg_stat_bgwriter.checkpoints_req column.
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
In walwriter's main loop, WAL stats message is only sent if enough time
has passed since last one was sent to reach PGSTAT_STAT_INTERVAL msecs.
This is necessary to avoid overloading to the stats collector. But this
can cause recent WAL stats to be unsent when walwriter exits.
To ensure that all the WAL stats are sent, this commit makes walwriter
force to send remaining WAL stats to the collector when it exits because
of shutdown request. Note that those remaining WAL stats can still be
unsent when walwriter exits with non-zero exit code (e.g., FATAL error).
This is OK because that walwriter exit leads to server crash and
subsequent recovery discards all the stats. So there is no need to send
remaining stats in that case.
Author: Masahiro Ikeda
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
1. Backends waiting for buffer I/O are now interruptible.
2. If something goes wrong in a backend that is currently performing
I/O, waiting backends no longer wake up until that backend reaches
AbortBufferIO() and broadcasts on the CV. Previously, any waiters would
wake up (because the I/O lock was automatically released) and then
busy-loop until AbortBufferIO() cleared BM_IO_IN_PROGRESS.
3. LWLockMinimallyPadded is removed, as it would now be unused.
Author: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (earlier version, 2016)
Discussion: https://postgr.es/m/CA%2BhUKGJ8nBFrjLuCTuqKN0pd2PQOwj9b_jnsiGFFMDvUxahj_A%40mail.gmail.com
Discussion: https://postgr.es/m/CA+Tgmoaj2aPti0yho7FeEf2qt-JgQPRWb0gci_o1Hfr=C56Xng@mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
PostgreSQL disabled compression as of e3bdb2d and the documentation
recommends against using it since. Additionally, SSL compression has
been disabled in OpenSSL since version 1.1.0, and was disabled in many
distributions long before that. The most recent TLS version, TLSv1.3,
disallows compression at the protocol level.
This commit removes the feature itself, removing support for the libpq
parameter sslcompression (parameter still listed for compatibility
reasons with existing connection strings, just ignored), and removes
the equivalent field in pg_stat_ssl and de facto PgBackendSSLStatus.
Note that, on top of removing the ability to activate compression by
configuration, compression is actively disabled in both frontend and
backend to avoid overrides from local configurations.
A TAP test is added for deprecated SSL parameters to check after
backwards compatibility.
Bump catalog version.
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/7E384D48-11C5-441B-9EC3-F7DB1F8518F6@yesql.se
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
This option controls if toast tables associated with a relation are
vacuumed or not when running a manual VACUUM. It was already possible
to trigger a manual VACUUM on a toast relation without processing its
main relation, but a manual vacuum on a main relation always forced a
vacuum on its toast table. This is useful in scenarios where the level
of bloat or transaction age of the main and toast relations differs a
lot.
This option is an extension of the existing VACOPT_SKIPTOAST that was
used by autovacuum to control if toast relations should be skipped or
not. This internal flag is renamed to VACOPT_PROCESS_TOAST for
consistency with the new option.
A new option switch, called --no-process-toast, is added to vacuumdb.
Author: Nathan Bossart
Reviewed-by: Kirk Jamison, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/BA8951E9-1524-48C5-94AF-73B1F0D7857F@amazon.com
This add counters for number of sessions, the different kind of session
termination types, and timers for how much time is spent in active vs
idle in a database to pg_stat_database.
Internally this also renames the parameter "force" to disconnect. This
was the only use-case for the parameter before, so repurposing it to
this mroe narrow usecase makes things cleaner than inventing something
new.
Author: Laurenz Albe
Reviewed-By: Magnus Hagander, Soumyadeep Chakraborty, Masahiro Ikeda
Discussion: https://postgr.es/m/b07e1f9953701b90c66ed368656f2aef40cac4fb.camel@cybertec.at
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Up to now, if the DBA issued "pg_ctl stop -m immediate", the message
sent to clients was the same as for a crash-and-restart situation.
This is confusing, not least because the message claims that the
database will soon be up again, something we have no business
predicting.
Improve things so that we can generate distinct messages for the two
cases (and also recognize an ad-hoc SIGQUIT, should somebody try that).
To do that, add a field to pmsignal.c's shared memory data structure
that the postmaster sets just before broadcasting SIGQUIT to its
children. No interlocking seems to be necessary; the intervening
signal-sending and signal-receipt should sufficiently serialize accesses
to the field. Hence, this isn't any riskier than the existing usages
of pmsignal.c.
We might in future extend this idea to improve other
postmaster-to-children signal scenarios, although none of them
currently seem to be as badly overloaded as SIGQUIT.
Discussion: https://postgr.es/m/559291.1608587013@sss.pgh.pa.us
Same type of issue as in commit 53d4f5fef and earlier fixes; also
found by apparently-more-picky-than-the-buildfarm valgrind testing.
This one is an oversight in commit 986816750. Since that's new in
HEAD, no need for a back-patch.
Revert ac22929a26, as well as the followup fix 113d3591b8. Because it broke
the assumption that the startup process waiting for the recovery conflict
on buffer pin should be waken up only by buffer unpin or the timeout enabled
in ResolveRecoveryConflictWithBufferPin(). It caused, for example,
SIGHUP signal handler or walreceiver process to wake that startup process
up unnecessarily frequently.
Additionally, add the comments about why that dedicated latch that
the reverted patch tried to get rid of should not be removed.
Thanks to Kyotaro Horiguchi for the discussion.
Author: Fujii Masao
Discussion: https://postgr.es/m/d8c0c608-021b-3c73-fffd-3240829ee986@oss.nttdata.com
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
After autovacuum collects the relations to vacuum or analyze, it rechecks
whether each relation still needs to be vacuumed or analyzed before actually
doing that. Previously this recheck could be a significant overhead
especially when there were a very large number of relations. This was
because each recheck forced the statistics to be refreshed, and the refresh
of the statistics for a very large number of relations could cause heavy
overhead. There was the report that this issue caused autovacuum workers
to have gotten “stuck” in a tight loop of table_recheck_autovac() that
rechecks whether a relation needs to be vacuumed or analyzed.
This commit speeds up the recheck by making autovacuum worker reuse
the previously-read statistics for the recheck if possible. Then if that
"stale" statistics says that a relation still needs to be vacuumed or analyzed,
autovacuum refreshes the statistics and does the recheck again.
The benchmark shows that the more relations exist and autovacuum workers
are running concurrently, the more this change reduces the autovacuum
execution time. For example, when there are 20,000 tables and 10 autovacuum
workers are running, the benchmark showed that the change improved
the performance of autovacuum more than three times. On the other hand,
even when there are only 1000 tables and only a single autovacuum worker
is running, the benchmark didn't show any big performance regression by
the change.
Firstly POC patch was proposed by Jim Nasby. As the result of discussion,
we used Tatsuhito Kasahara's version of the patch using the approach
suggested by Tom Lane.
Reported-by: Jim Nasby
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/3FC6C2F2-8A47-44C0-B997-28830B5716D0@amazon.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Commit 6b466bf5f2 allowed pg_stat_statements to track the number of
WAL records, full page images and bytes that each statement generated.
Similarly this commit allows us to track the cluster-wide WAL statistics
counters.
New columns wal_records, wal_fpi and wal_bytes are added into the
pg_stat_wal view, and reports the total number of WAL records,
full page images and bytes generated in the , respectively.
Author: Masahiro Ikeda
Reviewed-by: Amit Kapila, Movead Li, Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/35ef960128b90bfae3b3fdf60a3a860f@oss.nttdata.com
Currently only OpenSSL requires this initialization, but in the future
other SSL implementations are likely to need it as well. Abstracting
this functionality out into a separate function makes this cleaner and
more clear, and also removes the dependency on OpenSSL headers from
fork_process.c.
OpenSSL is special in that we need to initialize this random number
generator even if we're not going to use it directly, until we drop
support for everything prior to OpenSSL 1.1.1. (And of course also if we
actually use it). All other implementations are left empty at this time,
but more are expected to be added in the future.
Author: Daniel Gustafsson <daniel@yesql.se>, Michael Paquier <michael@paquier.xyz>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/F6291C3C-747C-4C93-BCE0-28BB420B1FF5@yesql.se
There is no outright bug here but it is better to be consistent with the
usage at other places in the same file. In the passing, fix a wrong
assertion in pgstat_recv_replslot.
Author: Kyotaro Horiguchi
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/20201104.175523.1704166915688949637.horikyota.ntt@gmail.com
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
This adds the statistics about transactions streamed to the decoding
output plugin from ReorderBuffer. Users can query the
pg_stat_replication_slots view to check these stats and call
pg_stat_reset_replication_slot to reset the stats of a particular slot.
Users can pass NULL in pg_stat_reset_replication_slot to reset stats of
all the slots.
Commit 9868167500 has added the basic infrastructure to capture the stats
of slot and this commit extends the statistics collector to track
additional information about slots.
Bump the catversion as we have added new columns in the catalog entry.
Author: Ajin Cherian and Amit Kapila
Reviewed-by: Sawada Masahiko and Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1+chpEomLzgSoky-D31qev19AmECNiEAietPQUGEFhtVA@mail.gmail.com
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
We decided that the policy established in commit 7634bd4f6 for
the bgwriter, checkpointer, walwriter, and walreceiver processes,
namely that they should accept SIGQUIT at all times, really ought
to apply uniformly to all postmaster children. Therefore, get
rid of the duplicative and inconsistent per-process code for
establishing that signal handler and removing SIGQUIT from BlockSig.
Instead, make InitPostmasterChild do it.
The handler set up by InitPostmasterChild is SignalHandlerForCrashExit,
which just summarily does _exit(2). In interactive backends, we
almost immediately replace that with quickdie, since we would prefer
to try to tell the client that we're dying. However, this patch is
changing the behavior of autovacuum (both launcher and workers), as
well as walsenders. Those processes formerly also used quickdie,
but AFAICS that was just mindless copy-and-paste: they don't have
any interactive client that's likely to benefit from being told this.
The stats collector continues to be an outlier, in that it thinks
SIGQUIT means normal exit. That should probably be changed for
consistency, but there's another patch set where that's being
dealt with, so I didn't do so here.
Discussion: https://postgr.es/m/644875.1599933441@sss.pgh.pa.us
We use the timestamp of the global statfile if we are not able to
determine it for a particular database in case the entry for that database
doesn't exist. However, we were using it even when the statfile is
corrupt.
As there is no user reported issue and it is not clear if there is any
impact of this on actual application so decided not to backpatch.
Reported-by: Amit Kapila
Author: Amit Kapila
Reviewed-by: Sawada Masahiko, Magnus Hagander and Alvaro Herrera
Discussion: https://postgr.es/m/CAA4eK1J3oTJKyVq6v7K4d3jD+vtnruG9fHRib6UuWWsrwAR6Aw@mail.gmail.com
The bgwriter, checkpointer, walwriter, and walreceiver processes
claimed to allow SIGQUIT "at all times". In reality SIGQUIT
would get re-blocked during error recovery, because we didn't
update the actual signal mask immediately, so sigsetjmp() would
save and reinstate a mask that includes SIGQUIT.
This appears to be simply a coding oversight. There's never a
good reason to hold off SIGQUIT in these processes, because it's
going to just call _exit(2) which should be safe enough, especially
since the postmaster is going to tear down shared memory afterwards.
Hence, stick in PG_SETMASK() calls to install the modified BlockSig
mask immediately.
Also try to improve the comments around sigsetjmp blocks. Most of
them were just referencing postgres.c, which is misleading because
actually postgres.c manages the signals differently.
No back-patch, since there's no evidence that this is causing any
problems in the field.
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
Currently, no useful trace is left in the logs when the postmaster
is forced to use SIGKILL to shut down children that failed to respond
to SIGQUIT. Some questions were raised about how often that scenario
happens in the buildfarm, so let's add a LOG-level message showing
that it happened.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Although 58c6feccf fixed the case for SIGQUIT, we were still calling
proc_exit() from signal handlers for SIGTERM and timeout failures in
ProcessStartupPacket. Fortunately, at the point where that code runs,
we haven't yet connected to shared memory in any meaningful way, so
there is nothing we need to undo in shared memory. This means it
should be safe to use _exit(1) here, ie, not run any atexit handlers
but also inform the postmaster that it's not a crash exit.
To make sure nobody breaks the "nothing to undo" expectation, add
a cross-check that no on-shmem-exit or before-shmem-exit handlers
have been registered yet when we finish using these signal handlers.
This change is simple enough that maybe it could be back-patched,
but I won't risk that right now.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Bring the signal handling for startup-packet collection into line
with the policy established in commits bedadc732 and 8e19a8264,
namely don't risk running atexit callbacks when handling SIGQUIT.
Ideally, we'd not do so for SIGTERM or timeout interrupts either,
but that change seems a bit too risky for the back branches.
For now, just improve the comments in this area to describe the risk.
Also relocate where BackendInitialize re-disables these interrupts,
to minimize the code span where they're active. This doesn't buy
a whole lot of safety, but it can't hurt.
In passing, rename startup_die() to remove confusion about whether
it is for the startup process.
Like the previous commits, back-patch to all supported branches.
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Commit 8e19a8264 changed the SIGQUIT handlers of almost all server
processes not to run atexit callbacks. The archiver process was
skipped, perhaps because it's not connected to shared memory; but
it's just as true here that running atexit callbacks in a signal
handler is unsafe. So let's make it work like the rest.
In HEAD and v13, we can use the common SignalHandlerForCrashExit
handler. Before that, just tweak pgarch_exit to use _exit(2)
explicitly.
Like the previous commit, back-patch to all supported branches.
Kyotaro Horiguchi, back-patching by me
Discussion: https://postgr.es/m/1850884.1599601164@sss.pgh.pa.us
Because sigsetjmp() will restore the initial state with signals blocked,
the code path in bgworker.c for reporting an error and exiting would
execute that way. Usually this is fairly harmless; but if a parallel
worker had an error message exceeding the shared-memory communication
buffer size (16K) it would lock up, because it would wait for a
resume-sending signal from its parallel leader which it would never
detect.
To fix, just unblock signals at the appropriate point.
This can be shown to fail back to 9.6. The lack of parallel query
infrastructure makes it difficult to provide a simple test case for
9.5; but I'm pretty sure the issue exists in some form there as well,
so apply the code change there too.
Vignesh C, reviewed by Bharath Rupireddy, Robert Haas, and myself
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
Allow BufFile to support temporary files that can be used by the single
backend when the corresponding files need to be survived across the
transaction and need to be opened and closed multiple times. Such files
need to be created as a member of a SharedFileSet.
Additionally, this commit implements the interface for BufFileTruncate to
allow files to be truncated up to a particular offset and extends the
BufFileSeek API to support the SEEK_END case. This also adds an option to
provide a mode while opening the shared BufFiles instead of always opening
in read-only mode.
These enhancements in BufFile interface are required for the upcoming
patch to allow the replication apply worker, to handle streamed
in-progress transactions.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Similar to the previous commit this increases the chance that data
frequently needed by GetSnapshotData() stays in l2 cache. As we now
take care to not unnecessarily write to ProcGlobal->vacuumFlags, there
should be very few modifications to the ProcGlobal->vacuumFlags array.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
This had gotten a little disjointed over time, and some of the grammar
was sloppy. Rewrite for more clarity.
In passing, re-pgindent some recently added comments.
No code changes.
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
Create LatchWaitSet at backend startup time, and use it to implement
WaitLatch(). This avoids repeated epoll/kqueue setup and teardown
system calls.
Reorder SubPostmasterMain() slightly so that we restore the postmaster
pipe and Windows signal emulation before we reach InitPostmasterChild(),
to make this work in EXEC_BACKEND builds.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
OpenSSL deprecated RAND_cleanup(), and OpenSSL 1.1.0 made it into a
no-op. Replace it with RAND_poll(), per an OpenSSL community
recommendation. While this has no user-visible consequences under
OpenSSL defaults, it might help under non-default settings.
Daniel Gustafsson, reviewed by David Steele and Michael Paquier.
Discussion: https://postgr.es/m/9B038FA5-23E8-40D0-B932-D515E1D8F66A@yesql.se
Previously we checked that the ssl pointer was not null, but this puts a
requirement on there being such a pointer which may not be true in
future multi-ssl-library supporting times. This seems to have been an
oversight in 9029f4b374, but hasn't really had any effect since we only
have one library.
Author: Daniel Gustafsson
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Previously, AsyncShmemInit forcibly initialized the first page of the
async SLRU, to save dealing with that case in asyncQueueAddEntries.
But this is a poor tradeoff, since many installations do not ever use
NOTIFY; for them, expending those cycles in AsyncShmemInit is a
complete waste. Besides, this only saves a couple of instructions
in asyncQueueAddEntries, which hardly seems likely to be measurable.
The real reason to change this now, though, is that now that we track
SLRU access stats, the existing code is causing the postmaster to
accumulate some access counts, which then get inherited into child
processes by fork(), messing up the statistics. Delaying the
initialization into the first child that does a NOTIFY fixes that.
Hence, we can revert f3d23d83e, which was an incorrect attempt at
fixing that issue. Also, add an Assert to pgstat.c that should
catch any future errors of the same sort.
Discussion: https://postgr.es/m/8367.1589391884@sss.pgh.pa.us
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
Previously since SLRUStats was not initialized, SLRU stats counters
could begin with non-zero value. Which could lead to incorrect results
in pg_stat_slru view.
Author: Fujii Masao
Reviewed-by: Tomas Vondra
Discussion: https://postgr.es/m/976bbb73-a112-de3c-c488-b34b64609793@oss.nttdata.com
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
If the client is compiled with GSSAPI support and tries to start up GSS
with the server, but the server is not compiled with GSSAPI support, we
would mistakenly end up falling through to call ProcessStartupPacket
with secure_done = true, but the client might then try to perform SSL,
which the backend wouldn't understand and we'd end up failing the
connection with:
FATAL: unsupported frontend protocol 1234.5679: server supports 2.0 to 3.0
Fix by arranging to track ssl_done independently from gss_done, instead
of trying to use the same boolean for both.
Author: Andrew Gierth
Discussion: https://postgr.es/m/87h82kzwqn.fsf@news-spur.riddles.org.uk
Backpatch: 12-, where GSSAPI encryption was added.
Checkpointer uses its MyLatch to wake up when a checkpoint request is
received. But before commit c655077639 the latch was not used for
anything else, so the code could just go to sleep after each loop
without rechecking the sleeping condition. That commit added a separate
ResetLatch in its code path[1], which can cause a checkpoint to go
unnoticed for potentially a long time.
Fix by skipping sleep if any checkpoint flags are set. Also add a test
to verify this; authored by Kyotaro Horiguchi.
[1] CreateCheckPoint -> InvalidateObsoleteReplicationSlots ->
ConditionVariableTimeSleep
Report and diagnosis by Kyotaro Horiguchi.
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.141956.891237856186513376.horikyota.ntt@gmail.com
