* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Commit d94c36a45a introduced error handling to sslinfo to handle
OpenSSL errors gracefully. This ports this errorhandling to the
backend TLS implementation.
Author: Daniel Gustafsson <daniel@yesql.se>
OpenSSL's native reports about problems related to protocol version
restrictions are pretty opaque and inconsistent. When we get an
SSL error that is plausibly due to this, emit a hint message that
includes the range of SSL protocol versions we (think we) are
allowing. This should at least get the user thinking in the right
direction to resolve the problem, even if the hint isn't totally
accurate, which it might not be for assorted reasons.
Back-patch to v13 where we increased the default minimum protocol
version, thereby increasing the risk of this class of failure.
Patch by me, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/a9408304-4381-a5af-d259-e55d349ae4ce@2ndquadrant.com
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Commit 79dfa8a has introduced a check to catch when the minimum protocol
version was set higher than the maximum version, however an error was
getting generated when both bounds are set even if they are able to
work, causing a backend to not use a new SSL context but keep the old
one.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/14BFD060-8C9D-43B4-897D-D5D9AA6FC92B@yesql.se
The default hook function sets the default password callback function.
In order to allow preloaded libraries to have an opportunity to override
the default, TLS initialization if now delayed slightly until after
shared preloaded libraries have been loaded.
A test module is provided which contains a trivial example that decodes
an obfuscated password for an SSL certificate.
Author: Andrew Dunstan
Reviewed By: Andreas Karlsson, Asaba Takanori
Discussion: https://postgr.es/m/04116472-818b-5859-1d74-3d995aab2252@2ndQuadrant.com
Mixing incorrect bounds in the SSL context leads to confusing error
messages generated by OpenSSL which are hard to act on. New range
checks are added when both min/max parameters are loaded in the context
of a SSL reload to improve the error reporting. Note that this does not
make use of the GUC hook machinery contrary to 41aadee, as there is no
way to ensure a consistent range check (except if there is a way one day
to define range types for GUC parameters?). Hence, this patch applies
only to OpenSSL, and uses a logic similar to other parameters to trigger
an error when reloading the SSL context in a session.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200114035420.GE1515@paquier.xyz
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Two routines have been added in OpenSSL 1.1.0 to set the protocol bounds
allowed within a given SSL context:
- SSL_CTX_set_min_proto_version
- SSL_CTX_set_max_proto_version
As Postgres supports OpenSSL down to 1.0.1 (as of HEAD), equivalent
replacements exist in the tree, which are only available for the
backend. A follow-up patch is planned to add control of the SSL
protocol bounds for libpq, so move those routines to src/common/ so as
libpq can use them.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Support is out of scope from all the major vendors for these versions
(for example RHEL5 uses a version based on 0.9.8, and RHEL6 uses 1.0.1),
and it created some extra maintenance work. Upstream has stopped
support of 0.9.8 in December 2015 and of 1.0.0 in February 2016.
Since b1abfec, note that the default SSL protocol version set with
ssl_min_protocol_version is TLSv1.2, whose support was added in OpenSSL
1.0.1, so there is no point to enforce ssl_min_protocol_version to TLSv1
in the SSL tests.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/20191205083252.GE5064@paquier.xyz
When loading DH parameters used for the generation of ephemeral DH keys
in the backend, the code has never bothered releasing the memory used
for the DH information loaded from a file or from libpq's default. This
commit makes sure that the information is properly free()'d.
Note that as SSL parameters can be reloaded, this can cause an accumulation
of memory leaked. As the leak is minor, no backpatch is done.
Reported-by: Dmitry Uspenskiy
Discussion: https://postgr.es/m/16160-18367e56e9a28264@postgresql.org
Some older OpenSSL versions (0.9.8 branch) define TLS*_VERSION macros
but not the corresponding SSL_OP_NO_* macro, which causes the code for
handling ssl_min_protocol_version/ssl_max_protocol_version to fail to
compile. To fix, add more #ifdefs and error handling.
Reported-by: Victor Wagner <vitus@wagner.pp.ru>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190924101859.09383b4f%40fafnir.local.vm
HEAD supports OpenSSL 0.9.8 and newer versions, and this code likely got
forgotten as its surrounding comments mention an incorrect version
number.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/20190927032311.GB8485@paquier.xyz
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Be more consistent about use of XXXGetDatum macros in new jsonpath
code. This is mostly to avoid having code that looks randomly
different from everyplace else that's doing the exact same thing.
In pg_regress.c, avoid an unreferenced-function warning from
compilers that don't understand pg_attribute_unused(). Putting
the function inside the same #ifdef as its only caller is more
straightforward coding anyway.
In be-secure-openssl.c, avoid use of pg_attribute_unused() on a label.
That's pretty creative, but there's no good reason to suppose that
it's portable, and there's absolutely no need to use goto's here in the
first place. (This wasn't actually causing any buildfarm complaints,
but it's new code in v12 so it has no portability track record.)
In case of a reload, we just want to LOG errors instead of FATAL when
processing SSL configuration, but the more recent code for the
ssl_*_protocol_version settings didn't behave like that.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Commit cfdf4dc4 added an assertion that every WaitLatch() or similar
handles postmaster death. One place did not, but was missed in
review and testing due to the need for an SSL connection. Fix, by
asking for WL_EXIT_ON_PM_DEATH.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/20181124143845.GA15039%40msg.df7cb.de
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
As already explained in configure.in, using the OpenSSL version number
to detect presence of functions doesn't work, because LibreSSL reports
incompatible version numbers. Fortunately, the functions we need here
are actually macros, so we can just test for them directly.
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
The existing "connection authorized" server log messages used OpenSSL
API calls directly, even though similar abstracted API calls exist.
Change to use the latter instead.
Change the function prototype for the functions that return the TLS
version and the cipher to return const char * directly instead of
copying into a buffer. That makes them slightly easier to use.
Add bits= to the message. psql shows that, so we might as well show the
same information on the client and server.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Some things in be-secure-openssl.c and fe-secure-openssl.c were not
actually specific to OpenSSL but could also be used by other
implementations. In order to avoid copy-and-pasting, move some of that
code to common files.
Move the documentation of the SSL API calls are supposed to do into the
headers files, instead of keeping them in the files for the OpenSSL
implementation. That way, they don't have to be duplicated or be
inconsistent when other implementations are added.
It seems we can't easily work around the lack of
X509_get_signature_nid(), so revert the previous attempts and just
disable the tls-server-end-point feature if we don't have it.
This adds a second standard channel binding type for SCRAM. It is
mainly intended for third-party clients that cannot implement
tls-unique, for example JDBC.
Author: Michael Paquier <michael.paquier@gmail.com>
This is the basic feature set using OpenSSL to support the feature. In
order to allow the frontend and the backend to fetch the sent and
expected TLS Finished messages, a PG-like API is added to be able to
make the interface pluggable for other SSL implementations.
This commit also adds a infrastructure to facilitate the addition of
future channel binding types as well as libpq parameters to control the
SASL mechanism names and channel binding names. Those will be added by
upcoming commits.
Some tests are added to the SSL test suite to test SCRAM authentication
with channel binding.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
We don't actually support session tickets, since we do not create an SSL
session identifier. But it seems that OpenSSL will issue a session ticket
on-demand anyway, which will then fail when used. This results in
reconnection failures when using ticket-aware client-side SSL libraries
(such as the Npgsql .NET driver), as reported by Shay Rojansky.
To fix, just tell OpenSSL not to issue tickets. At some point in the
far future, we might consider enabling tickets instead. But the security
implications of that aren't entirely clear; and besides it would have
little benefit except for very short-lived database connections, which is
Something We're Bad At anyhow. It would take a lot of other work to get
to a point where that would really be an exciting thing to do.
While at it, also tell OpenSSL not to use a session cache. This doesn't
really do anything, since a backend would never populate the cache anyway,
but it might gain some micro-efficiencies and/or reduce security
exposures.
Patch by me, per discussion with Heikki Linnakangas and Shay Rojansky.
Back-patch to all supported versions.
Discussion: https://postgr.es/m/CADT4RqBU8N-csyZuzaook-c795dt22Zcwg1aHWB6tfVdAkodZA@mail.gmail.com
Commit c0a15e07c moved the setting of OpenSSL's SSL_OP_SINGLE_DH_USE option
into a new subroutine initialize_dh(), but forgot to remove it from where
it was. SSL_CTX_set_options() is a trivial function, amounting indeed to
just "ctx->options |= op", hence there's no reason to contort the code or
break separation of concerns to avoid calling it twice. So separating the
DH setup from disabling of old protocol versions is a good change, but we
need to finish the job.
Noted while poking into the question of SSL session tickets.