I happened to notice that the new test case I added in b55b4dad9
falls over if one runs "make check" repeatedly; though not in branches
after v10. That's because it was assuming that tmp_check/pgpass
wouldn't exist already. However, it's only been since v11 that the
Makefiles forcibly remove all of tmp_check/ before starting a TAP run.
This fix to unlink the file is therefore strictly necessary only in
v10 ... but it seems wisest to do it across the board, rather than
let the test rely on external logic to get the conditions right.
Commit 3f60f690f only partially fixed the broken-status-tracking
issue in LogicalRepApplyLoop: we need ping_sent to have the same
lifetime as last_recv_timestamp. The effects are much less serious
than what that commit fixed, though. AFAICS this would just lead to
extra ping requests being sent, once per second until the sender
responds. Still, it's a bug, so backpatch to v10 as before.
Discussion: https://postgr.es/m/959627.1599248476@sss.pgh.pa.us
When reading a WAL record fails to find continuation record(s) of the
proper length, report what it expects, for clarity.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200903212152.GA15319@alvherre.pgsql
If this data is not collected, pg_dump segfaults if asked for column
inserts.
Fix by Fabrízio de Royes Mello
Backpatch to release 12 where the bug was introduced.
The "DROP ACCESS METHOD gist2" test will require locking the index
to be dropped and then its table; while most ordinary operations
lock a table first then its index. While no concurrent test scripts
should be touching fast_emp4000, autovacuum might chance to be
processing that table when the DROP runs, resulting in a deadlock
failure. This is pretty rare but we see it in the buildfarm from
time to time.
To fix, acquire a lock on fast_emp4000 before issuing the DROP.
Since the point of the exercise is mostly to prevent buildfarm
failures, back-patch to 9.6 where this test was introduced.
Discussion: https://postgr.es/m/839004.1599185607@sss.pgh.pa.us
This node already handles multiple options using a bitmask, so having a
separate boolean flag is not necessary. This simplifies the code a bit
with less arguments to give to the reindex routines, by replacing the
boolean with an equivalent bitmask value.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20200902110326.GA14963@paquier.xyz
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Because sigsetjmp() will restore the initial state with signals blocked,
the code path in bgworker.c for reporting an error and exiting would
execute that way. Usually this is fairly harmless; but if a parallel
worker had an error message exceeding the shared-memory communication
buffer size (16K) it would lock up, because it would wait for a
resume-sending signal from its parallel leader which it would never
detect.
To fix, just unblock signals at the appropriate point.
This can be shown to fail back to 9.6. The lack of parallel query
infrastructure makes it difficult to provide a simple test case for
9.5; but I'm pretty sure the issue exists in some form there as well,
so apply the code change there too.
Vignesh C, reviewed by Bharath Rupireddy, Robert Haas, and myself
Discussion: https://postgr.es/m/CALDaNm1d1hHPZUg3xU4XjtWBOLCrA+-2cJcLpw-cePZ=GgDVfA@mail.gmail.com
A backslash at the end of a line now causes the next line to be appended
to the current one (effectively, the backslash and newline are discarded).
This allows long HBA entries to be created without legibility problems.
While we're here, get rid of the former hard-wired length limit on
pg_hba.conf lines, by using an expansible StringInfo buffer instead
of a fixed-size local variable.
Since the same code is used to read the ident map file, these changes
apply there as well.
Fabien Coelho, reviewed by Justin Pryzby and David Zhang
Discussion: https://postgr.es/m/alpine.DEB.2.21.2003251906140.15243@pseudo
To add support for streaming of in-progress transactions into the
built-in logical replication, we need to do three things:
* Extend the logical replication protocol, so identify in-progress
transactions, and allow adding additional bits of information (e.g.
XID of subtransactions).
* Modify the output plugin (pgoutput) to implement the new stream
API callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle streamed
in-progress transaction by spilling the data to disk and then
replaying them on commit.
We however must explicitly disable streaming replication during
replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover we don't have a replication connection open so we
don't have where to send the data anyway.
Author: Tomas Vondra, Dilip Kumar and Amit Kapila
Reviewed-by: Amit Kapila, Kuntal Ghosh and Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This splits a string at occurrences of a delimiter. It is exactly like
string_to_array() except for producing a set of values instead of an
array of values. Thus, the relationship of these two functions is
the same as between regexp_split_to_table() and regexp_split_to_array().
Although the same results could be had from unnest(string_to_array()),
this is somewhat faster than that, and anyway it seems reasonable to
have it for symmetry with the regexp functions.
Pavel Stehule, reviewed by Peter Smith
Discussion: https://postgr.es/m/CAFj8pRD8HOpjq2TqeTBhSo_QkzjLOhXzGCpKJ4nCs7Y9SQkuPw@mail.gmail.com
Listing a full set of relations with those psql meta-commands, without a
matching pattern, has never showed the access method associated with
each relation. This commit adds the access method of tables, indexes
and matviews, masking it for relation kinds where it does not apply.
Note that when HIDE_TABLEAM is enabled, the information does not show
up. This is available when connecting to a backend version of at least
12, where table AMs have been introduced.
Author: Georgios Kokolatos
Reviewed-by: Vignesh C, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/svaS1VTOEscES9CLKVTeKItjJP1EEJuBhTsA0ESOdlnbXeQSgycYwVlliL5zt8Jwcfo4ATYDXtEqsExxjkSkkhCSTCL8fnRgaCAJdr0unUg=@protonmail.com
In SyncRepWaitForLSN() routine called in transaction commit time,
SyncRepLock is necessary to atomically both check the shared
sync_standbys_defined flag and operate the sync replication wait-queue.
On the other hand, when the flag is false, the lock is not necessary
because the wait-queue is not touched. But due to the changes by
commit 48c9f49265, previously the lock was taken whatever the flag was.
This could cause unnecessary performance overhead in every transaction
commit time. Therefore this commit avoids that unnecessary aquisition
of SyncRepLock.
Author: Fujii Masao
Reviewed-by: Asim Praveen, Masahiko Sawada,
Discussion: https://postgr.es/m/20200406050332.nsscfqjzk2d57zyx@alap3.anarazel.de
When multiple relations are reindexed, a scan of pg_class is done first
to build the list of relations to work on. However the REINDEX logic
has never checked if a relation listed still exists when beginning the
work on it, causing for example sudden cache lookup failures.
This commit adds safeguards against dropped relations for REINDEX,
similarly to VACUUM or CLUSTER where we try to open the relation,
ignoring it if it is missing. A new option is added to the REINDEX
routines to control if a missed relation is OK to ignore or not.
An isolation test, based on REINDEX SCHEMA, is added for the concurrent
and non-concurrent cases.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200813043805.GE11663@paquier.xyz
Add a test case that exercises vacuum's deletion of empty GIN
posting pages. Since this is a temp table, it should now work
reliably to delete a bunch of rows and immediately VACUUM.
Before the preceding commit, this would not have had the desired
effect, at least not in parallel regression tests.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
Since other sessions aren't allowed to look into a temporary table
of our own session, we do not need to worry about the global xmin
horizon when setting the vacuum XID cutoff. Indeed, if we're not
inside a transaction block, we may set oldestXmin to be the next
XID, because there cannot be any in-doubt tuples in a temp table,
nor any tuples that are dead but still visible to some snapshot of
our transaction. (VACUUM, of course, is never inside a transaction
block; but we need to test that because CLUSTER shares the same code.)
This approach allows us to always clean out a temp table completely
during VACUUM, independently of concurrent activity. Aside from
being useful in its own right, that simplifies building reproducible
test cases.
Discussion: https://postgr.es/m/3490536.1598629609@sss.pgh.pa.us
We were already raising an error for DROP INDEX CONCURRENTLY on a
partitioned table, albeit a different and confusing one:
ERROR: DROP INDEX CONCURRENTLY must be first action in transaction
Change that to throw a more comprehensible error:
ERROR: cannot drop partitioned index \"%s\" concurrently
Michael Paquier authored the test case for indexes on temporary
partitioned tables.
Backpatch to 11, where indexes on partitioned tables were added.
Reported-by: Jan Mussler <jan.mussler@zalando.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16594-d2956ca909585067@postgresql.org
Historically there's been a hard-wired assumption here that no line of
a .pgpass file could be as long as NAMEDATALEN*5 bytes. That's a bit
shaky to start off with, because (a) there's no reason to suppose that
host names fit in NAMEDATALEN, and (b) this figure fails to allow for
backslash escape characters. However, it fails completely if someone
wants to use a very long password, and we're now hearing reports of
people wanting to use "security tokens" that can run up to several
hundred bytes. Another angle is that the file is specified to allow
comment lines, but there's no reason to assume that long comment lines
aren't possible.
Rather than guessing at what might be a more suitable limit, let's
replace the fixed-size buffer with an expansible PQExpBuffer. That
adds one malloc/free cycle to the typical use-case, but that's surely
pretty cheap relative to the I/O this code has to do.
Also, add TAP test cases to exercise this code, because there was no
test coverage before.
This reverts most of commit 2eb3bc588, as there's no longer a need for
a warning message about overlength .pgpass lines. (I kept the explicit
check for comment lines, though.)
In HEAD and v13, this also fixes an oversight in 74a308cf5: there's not
much point in explicit_bzero'ing the line buffer if we only do so in two
of the three exit paths.
Back-patch to all supported branches, except that the test case only
goes back to v10 where src/test/authentication/ was added.
Discussion: https://postgr.es/m/4187382.1598909041@sss.pgh.pa.us
Commit 808e13b282 introduced a few APIs to extend the existing Buffile
interface. In SharedFileSetDeleteOnProcExit, it tries to delete the list
element while traversing the list with 'foreach' construct which makes the
behavior of list traversal unpredictable.
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Tested-by: Dilip Kumar and Neha Sharma
Discussion: https://postgr.es/m/CAA4eK1JhLatVcQ2OvwA_3s0ih6Hx9+kZbq107cXVsSWWukH7vA@mail.gmail.com
Per discussion, we're planning to remove parser support for postfix
operators in order to simplify the grammar. So it behooves us to
put out a deprecation notice at least one release before that.
There is only one built-in postfix operator, ! for factorial.
Label it deprecated in the docs and in pg_description, and adjust
some examples that formerly relied on it. (The sister prefix
operator !! is also deprecated. We don't really have to remove
that one, but since we're suggesting that people use factorial()
instead, it seems better to remove both operators.)
Also state in the CREATE OPERATOR ref page that postfix operators
in general are going away.
Although this changes the initial contents of pg_description,
I did not force a catversion bump; it doesn't seem essential.
In v13, also back-patch 4c5cf5431, so that there's someplace for
the <link>s to point to.
Mark Dilger and John Naylor, with some adjustments by me
Discussion: https://postgr.es/m/BE2DF53D-251A-4E26-972F-930E523580E9@enterprisedb.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
A failure when dropping concurrently an index used in a replica identity
could leave in pg_index an index marked as !indisvalid and
indisreplident. Reindexing this index would switch back indisvalid to
true, and if the replica identity of the parent relation was switched to
use a different index, it would be possible to finish with more than one
index marked as indisreplident. If that were to happen, this could mess
up with the relation cache as an incorrect index could be used for the
replica identity.
Indexes marked as invalid are discarded as candidates for the replica
identity, as of RelationGetIndexList(), so similarly to what is done
with indisclustered, resetting indisreplident when the index is marked
as invalid keeps things consistent. REINDEX CONCURRENTLY's swapping
already resets the flag for the old index, while the new index inherits
the value of the old index to-be-dropped, so only DROP INDEX was an
issue.
Even if this is a bug, the sequence able to reproduce a problem requires
a failure while running DROP INDEX CONCURRENTLY, something unlikely
going to happen in the field, so no backpatch is done.
Author: Michael Paquier
Reviewed-by: Dmitry Dolgov
Discussion: https://postgr.es/m/20200827025721.GN2017@paquier.xyz
collectMatchBitmap() needs to re-find the index tuple it was previously
looking at, after transiently dropping lock on the index page it's on.
The tuple should still exist and be at its prior position or somewhere
to the right of that, since ginvacuum never removes tuples but
concurrent insertions could add one. However, there was a thinko in
that logic, to the effect of expecting any inserted tuples to have the
same index "attnum" as what we'd been scanning. Since there's no
physical separation of tuples with different attnums, it's not terribly
hard to devise scenarios where this fails, leading to transient "lost
saved point in index" errors. (While I've duplicated this with manual
testing, it seems impossible to make a reproducible test case with our
available testing technology.)
Fix by just continuing the scan when the attnum doesn't match.
While here, improve the error message used if we do fail, so that it
matches the wording used in btree for a similar case.
collectMatchBitmap()'s posting-tree code path was previously not
exercised at all by our regression tests. While I can't make
a regression test that exhibits the bug, I can at least improve
the code coverage here, so do that. The test case I made for this
is an extension of one added by 4b754d6c1, so it only works in
HEAD and v13; didn't seem worth trying hard to back-patch it.
Per bug #16595 from Jesse Kinkead. This has been broken since
multicolumn capability was added to GIN (commit 27cb66fdf),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/16595-633118be8eef9ce2@postgresql.org
The additional information added will be an offset number for heap
operations. This information will help us in finding the exact tuple due
to which the error has occurred.
Author: Mahendra Singh Thalor and Amit Kapila
Reviewed-by: Sawada Masahiko, Justin Pryzby and Amit Kapila
Discussion: https://postgr.es/m/CAKYtNApK488TDF4bMbw+1QH8HJf9cxdNDXquhU50TK5iv_FtCQ@mail.gmail.com
Allow BufFile to support temporary files that can be used by the single
backend when the corresponding files need to be survived across the
transaction and need to be opened and closed multiple times. Such files
need to be created as a member of a SharedFileSet.
Additionally, this commit implements the interface for BufFileTruncate to
allow files to be truncated up to a particular offset and extends the
BufFileSeek API to support the SEEK_END case. This also adds an option to
provide a mode while opening the shared BufFiles instead of always opening
in read-only mode.
These enhancements in BufFile interface are required for the upcoming
patch to allow the replication apply worker, to handle streamed
in-progress transactions.
Author: Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Previously the codes for pg_backend_memory_contexts were in
src/backend/utils/mmgr/mcxt.c. This commit moves them to
src/backend/utils/adt/mcxtfuncs.c so that mcxt.c basically includes
only the low-level interface for memory contexts.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/20200819135545.GC19121@paquier.xyz
pg_backend_memory_contexts view contains some internal information of
memory contexts. Since exposing them to any users by default may cause
security issue, this commit allows only superusers to read this view,
by default, like we do for pg_shmem_allocations view.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Michael Paquier, Fujii Masao
Discussion: https://postgr.es/m/1414992.1597849297@sss.pgh.pa.us
It's a bit inefficient to test if a Bitmapset is empty by counting all the
members and seeing if that number is zero. It's much better just to use
bms_is_empty(). Likewise for checking if there are at least two members,
just use bms_membership(), which does not need to do anything more after
finding two members.
Discussion: https://postgr.es/m/CAApHDvpvwm_QjbDOb5xga%2BKmX9XkN9xQavNGm3SvDbVnCYOerQ%40mail.gmail.com
Reviewed-by: Tomas Vondra
We were displaying the wrong phase information for 'info' message in the
index clean up phase because we were switching to the previous phase a bit
early. We were also not displaying context information for heap phase
unless the block number is valid which is fine for error cases but for
messages at 'info' or lower error level it appears to be inconsistent with
index phase information.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k4HcbhPnCs7paRTw1K-AHin8y4xKomB9Ru0ATw0UeTy2w@mail.gmail.com
The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
Commit 1281a5c90 rearranged the logic in this area rather drastically,
and it broke the case of adding a foreign key constraint in the same
ALTER that adds the pkey or unique constraint it depends on. While
self-referential fkeys are surely a pretty niche case, this used to
work so we shouldn't break it.
To fix, reorganize the scheduling rules in ATParseTransformCmd so
that a transformed AT_AddConstraint subcommand will be delayed into
a later pass in all cases, not only when it's been spit out as a
side-effect of parsing some other command type.
Also tweak the logic so that we won't run ATParseTransformCmd twice
while doing this. It seems to work even without that, but it's
surely wasting cycles to do so.
Per bug #16589 from Jeremy Evans. Back-patch to v13 where the new
code was introduced.
Discussion: https://postgr.es/m/16589-31c8d981ca503896@postgresql.org
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Commit 9d701e624f caused the regression test for EXPLAIN to fail on
the buildfarm member prion. This happened because of instability of
test output, i.e., in text format, whether "Planning:" line is output
varies depending on the system state.
This commit updated the regression test so that it ignores that
"Planning:" line to produce more stable test output and get rid of
the test failure.
Back-patch to v13.
Author: Fujii Masao
Discussion: https://postgr.es/m/1803897.1598021621@sss.pgh.pa.us
Commit ce77abe63c allowed EXPLAIN (BUFFERS) to report the information
on buffer usage during planning phase. However three issues were
reported regarding this feature.
(1) Previously, EXPLAIN option BUFFERS required ANALYZE. So the query
had to be actually executed by specifying ANALYZE even when we
want to see only the planner's buffer usage. This was inconvenient
especially when the query was write one like DELETE.
(2) EXPLAIN included the planner's buffer usage in summary
information. So SUMMARY option had to be enabled to report that.
Also this format was confusing.
(3) The output structure for planning information was not consistent
between TEXT format and the others. For example, "Planning" tag
was output in JSON format, but not in TEXT format.
For (1), this commit allows us to perform EXPLAIN (BUFFERS) without
ANALYZE to report the planner's buffer usage.
For (2), this commit changed EXPLAIN output so that the planner's
buffer usage is reported before summary information.
For (3), this commit made the output structure for planning
information more consistent between the formats.
Back-patch to v13 where the planner's buffer usage was allowed to
be reported in EXPLAIN.
Reported-by: Pierre Giraud, David Rowley
Author: Fujii Masao
Reviewed-by: David Rowley, Julien Rouhaud, Pierre Giraud
Discussion: https://postgr.es/m/07b226e6-fa49-687f-b110-b7c37572f69e@dalibo.com
Tom Lane
Jeff Davis
Alvaro Herrera
Andrew Dunstan
Bruce Momjian
Peter Eisentraut
Amit Kapila
Michael Paquier
Fujii Masao
David Rowley