and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
in favor of using the REINDEX TABLE apparatus, which does the same thing
simpler and faster. Also, make TRUNCATE not use cluster.c at all, but
just assign a new relfilenode and REINDEX. This partially addresses
Hartmut Raschick's complaint from last December that 7.4's TRUNCATE is
an order of magnitude slower than prior releases. By getting rid of
a lot of unnecessary catalog updates, these changes buy back about a
factor of two (on my system). The remaining overhead seems associated
with creating and deleting storage files, which we may not be able to
do much about without abandoning transaction safety for TRUNCATE.
modify. Also fix a passel of problems with ALTER TABLE CLUSTER ON:
failure to check that the index is safe to cluster on (or even belongs
to the indicated rel, or even exists), and failure to broadcast a relcache
flush event when changing an index's state.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
problem, per previous discussion. Make some additional changes to
centralize the knowledge of just how identifier downcasing is done,
in hopes of simplifying any future tweaking in this area.
This commit teaches ANALYZE to store such stats in pg_statistic, but
nothing is done yet about teaching the planner to use 'em.
Also, repair longstanding oversight in separate ANALYZE command: it
updated the pg_class.relpages and reltuples counts for the table proper,
but not for indexes.
indexes, it seems like we ought to put another layer of indirection
between the compute_stats functions and the actual data storage. This
would allow us to compute the values on-the-fly, for example.
subroutine in src/port/pgsleep.c. Remove platform dependencies from
miscadmin.h and put them in port.h where they belong. Extend recent
vacuum cost-based-delay patch to apply to VACUUM FULL, ANALYZE, and
non-btree index vacuuming.
By the way, where is the documentation for the cost-based-delay patch?
should not be too eager to reject paths involving unknown schemas, since
it can't really tell whether the schemas exist in the target database.
(Also, when reading pg_dumpall output, it could be that the schemas
don't exist yet, but eventually will.) ALTER USER SET has a similar issue.
So, reduce the normal ERROR to a NOTICE when checking search_path values
for these commands. Supporting this requires changing the API for GUC
assign_hook functions, which causes the patch to touch a lot of places,
but the changes are conceptually trivial.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
a single LEFT JOIN query instead of firing the check trigger for each
row individually. Stephan Szabo, with some kibitzing from Tom Lane and
Jan Wieck.
of Describe on a prepared statement. This was in the original 3.0
protocol proposal, but I took it out for reasons that seemed good at
the time. Put it back per yesterday's pghackers discussion.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
initial values and runtime changes in selected parameters. This gets
rid of the need for an initial 'select pg_client_encoding()' query in
libpq, bringing us back to one message transmitted in each direction
for a standard connection startup. To allow server version to be sent
using the same GUC mechanism that handles other parameters, invent the
concept of a never-settable GUC parameter: you can 'show server_version'
but it's not settable by any GUC input source. Create 'lc_collate' and
'lc_ctype' never-settable parameters so that people can find out these
settings without need for pg_controldata. (These side ideas were all
discussed some time ago in pgsql-hackers, but not yet implemented.)
rewritten and the protocol is changed, but most elog calls are still
elog calls. Also, we need to contemplate mechanisms for controlling
all this functionality --- eg, how much stuff should appear in the
postmaster log? And what API should libpq expose for it?
Add ALTER SEQUENCE to modify min/max/increment/cache/cycle values
Also updated create sequence docs to mention NO MINVALUE, & NO MAXVALUE.
New Files:
doc/src/sgml/ref/alter_sequence.sgml
src/test/regress/expected/sequence.out
src/test/regress/sql/sequence.sql
ALTER SEQUENCE is NOT transactional. It behaves similarly to setval().
It matches the proposed SQL200N spec, as well as Oracle in most ways --
Oracle lacks RESTART WITH for some strange reason.
--
Rod Taylor <rbt@rbt.ca>
> >
> > - Add check in pg_dump to see if the value returned is the max /min
> > values and replace with NO MAXVALUE, NO MINVALUE.
> >
> > - Change START and INCREMENT to use START WITH and INCREMENT BY syntax.
> > This makes it a touch easier to port to other databases with sequences
> > (Oracle). PostgreSQL supports both syntaxes already.
>
> + char bufm[100],
> + bufx[100];
>
> This seems to be an arbitary size. Why not set it to the actual maximum
> length?
>
> Also:
>
> + snprintf(bufm, 100, INT64_FORMAT, SEQ_MINVALUE);
> + snprintf(bufx, 100, INT64_FORMAT, SEQ_MAXVALUE);
>
> sizeof(bufm), sizeof(bufx) is probably the more
> maintenance-friendly/standard way to do it.
I changed the code to use sizeof - but will wait for a response from
Peter before changing the size. It's consistent throughout the sequence
code to be 100 for this purpose.
Rod Taylor <rbt@rbt.ca>
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
On Wed, 2003-01-08 at 21:59, Christopher Kings-Lynne wrote:
> I agree. I want to remove OIDs from heaps of our tables when we go to 7.3.
> I'd rather not have to do it in the dump due to down time.
Rod Taylor <rbt@rbt.ca>
startup, not in the parser; this allows ALTER DOMAIN to work correctly
with domain constraint operations stored in rules. Rod Taylor;
code review by Tom Lane.
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
-hackers a couple days ago.
Notes/caveats:
- added regression tests for the new functionality, all
regression tests pass on my machine
- added pg_dump support
- updated PL/PgSQL to support per-statement triggers; didn't
look at the other procedural languages.
- there's (even) more code duplication in trigger.c than there
was previously. Any suggestions on how to refactor the
ExecXXXTriggers() functions to reuse more code would be
welcome -- I took a brief look at it, but couldn't see an
easy way to do it (there are several subtly-different
versions of the code in question)
- updated the documentation. I also took the liberty of
removing a big chunk of duplicated syntax documentation in
the Programmer's Guide on triggers, and moving that
information to the CREATE TRIGGER reference page.
- I also included some spelling fixes and similar small
cleanups I noticed while making the changes. If you'd like
me to split those into a separate patch, let me know.
Neil Conway
Tom Lane
Bruce Momjian
PostgreSQL Daemon
Peter Eisentraut