type coercion after failing to find an exact match in pg_proc, but before
considering interpretations that involve a function call with one or
more argument type coercions. This avoids surprises wherein what looks
like a type coercion is interpreted as coercing to some third type and
then to the destination type, as in Dave Blasby's bug report of 3-Oct-01.
See subsequent discussion in pghackers.
'aggname (aggtype)'. The old syntax 'aggname aggtype' is still accepted
for backwards compatibility. Fix pg_dump, which was actually broken for
most cases of user-defined aggregates. Clean up error messages associated
with these commands.
> > > > > and --enable-unicode-convertion if it ought to work correctly
> > > > > with Tcl/Tk >= 8.1 (client or server side).
> > > > >
> > > > > - PL/Tcl needs to be changed to use pg_do_encoding_conversion
> > > > > if it runs on a Tcl version >= 8.1 .
> > >
> > > > I'll do pl/tcl part in the next version of patch. Using this approach we
> > > > can eliminate overhead for databases in UNICODE.
> > >
> > > Any progress on this? I'd prefer to get rid of this --enable-pltcl-utf
> > > option before release.
> >
> > Done
> >
> > Next version removes --enable-pltcl-utf switch and enables embedded
> > utf conversion of pgsql if tcl version >=8.1 and --enable-unicode-conversion
from the config file, so that these changes will propagate to backends
started later. Already-started backends continue to ignore changes
in these variables.
upper limit on what we will believe from sysconf(_SC_OPEN_MAX). The
default value is 1000, so that under ordinary conditions it won't
affect the behavior. But on platforms where the kernel promises far
more than it can deliver, this can be used to prevent running out of
file descriptors. See numerous past discussions, eg, pgsql-hackers
around 23-Dec-2000.
existing lock manager and spinlocks: it understands exclusive vs shared
lock but has few other fancy features. Replace most uses of spinlocks
with lightweight locks. All remaining uses of spinlocks have very short
lock hold times (a few dozen instructions), so tweak spinlock backoff
code to work efficiently given this assumption. All per my proposal on
pghackers 26-Sep-01.
a hung client or lost connection can't indefinitely block a postmaster
child (not to mention the possibility of deliberate DoS attacks).
Timeout is controlled by new authentication_timeout GUC variable,
which I set to 60 seconds by default ... does that seem reasonable?
rather than making index.html a symlink to the autogenerated name.
Fixes fatal problems with tar programs that don't handle symlinks
very well (MacOS X).
(The names user.html, admin.html, etc. are still available as make
targets, but they aren't packaged anymore.)
Use the manifest file that the stylesheets generate as the file list
for packaging. Put graphics in the right place while building, not
while packaging, so you can actually look at them after building.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
CREATE RULE bad_rule_combination_1 AS
ON SELECT TO emp
DO INSTEAD
SELECT * FROM toyemp;
CREATE RULE bad_rule_combination_2 AS
ON SELECT TO toyemp
DO INSTEAD
SELECT * FROM emp;
Tatsuo Ishii
undocumented items in TD.
Should doc patches alse be sent to pgsql-patches, or do I
have to subscribe to pgsql-docs?
The archive link for pgsql-patches is broken, and I don't
see any patches in spot checking the archive for pgsql-docs.
-Brad McLean.
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
discussion on pgsql-hackers (especially the frightening memory dump in
<12273.999562219@sss.pgh.pa.us>), we decided that it is best not to
use identifiers from an untrusted source at all. Therefore, all
claims of the suitability of PQescapeString() for identifiers have
been removed.
Florian Weimer
table creation time. Big deal you say - but this patch is the basis of the
next thing which is adding PRIMARY KEYs after table creation time. (Which
is currently impossible without twiddling catalogs)
Rundown
-------
* I have made the makeObjectName function of analyze.c non-static, and
exported it in analyze.h
* I have included analyze.h and defrem.h into command.c, to support
makingObjectNames and creating indices
* I removed the 'case CONSTR_PRIMARY' clause so that it properly fails and
says you can't add primary keys, rather than just doing nothing and
reporting nothing!!!
* I have modified the docs.
Algorithm
---------
* If name specified is null, search for a new valid constraint name. I'm
not sure if I should "lock" my generated name somehow tho - should I open
the relation before doing this step?
* Open relation in access exclusive mode
* Check that the constraint does not already exist
* Define the new index
* Warn if they're doubling up on an existing index
Christopher Kings-Lynne
occur unconditionally, even if the rule should otherwise execute
conditionally. This is more useful than giving an error, even though it's
not truly the correct behavior. Per today's pghackers discussion.
> pam_strerror() should be used a few more times, rather than just saying
> "Error!". Also, the configure.in snippet seems wrong. You add
> -I$pam_prefix/include/security to $INCLUDES and then you #include
> <security/pam_appl.h>. This whole thing is probably unnecessary, since
> PAM is a system library on the systems where it exists, so the headers
> and libraries are found automatically, unlike OpenSSL and
> Kerberos.
See attached revised patch. (I'm sure the configure.in stuff can be done
right/better, I'm just not enough of a autoconf guru to know what to
change it to.)
Dominic J. Eidson
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
Now with documentation update and disabling of UTF conversion for Tcl <=8.0
On Fri, 24 Aug 2001, Vsevolod Lobko wrote:
> On Thu, 23 Aug 2001, Tom Lane wrote:
>
> > > Is this looks better?
> >
> > It does, but one small gripe: the lack of semicolons will probably cause
> > pg_indent to mess up the indentation. (I know emacs' autoindent mode
> > will not work nicely with it, either.) Please set up the macros so that
> > you write
> >
> > UTF_BEGIN;
> > Tcl_DStringAppend(&unknown_src, UTF_E2U(part), -1);
> > UTF_END;
> >
> > and then I'll be happy.
>
> Attached revised patch
>
> > Your point about overhead is a good one, so I retract the gripe about
> > using a configure switch. But please include documentation patches to
> > describe the configure option in the administrator's guide (installation
> > section).
>
> This patch still uses configure switch for enabling feature.
>
> For enabling based on tcl version we have 2 posibilites:
> 1) having feature enabled by default, but in pltcl.c check for tcl
> version and disable it for old versions
> 2) enable or disable at configure time based on tcl version, but there
> are problem - current configure don't checks for tcl version at all
> and my configure skills not enought for adding this
>
Vsevolod Lobko
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
system. Some systems did not understand the 'l' section, and in general
it wasn't entirely appropriate.
On SCO OpenServer, the man pages won't be installed at all until someone
figures out their man system.
Client headers are no longer in a subdirectory, since they have been made
namespace-clean.
Internal libpq headers are in a private subdirectory.
Server headers are in a private subdirectory. pg_config has a new option
to point there.
the Admin Guide about routine maintenance tasks. Currently this only
discusses the various reasons for doing VACUUM, but perhaps it could be
fleshed out with topics like log rotation.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
syntax for language names (instead of 'string').
createlang now handles the case where a second language uses the same call
handler as an already installed language (e.g., plperl/plperlu).
droplang now handles the reverse case, i.e., dropping a language where
the call handler is still used by another language. Moreover, droplang
can now be used to drop any user-defined language, not just the supplied
ones.
Don't hardcode the maximum accepted server version, use PG_VERSION instead.
Install a notice processor so notices are handled like error messages.
Word smithing.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
clauses are equal(), before trying to match them up using btree opclass
inference rules. This allows it to recognize many simple cases involving
non-btree operations, for example 'x IS NULL'. Clean up code a little.
Sorry I don't have the original around to make a quick diff, but its a very small change... I think this should be in the next release, there's no reason not to have it.
its a function with no expected arguments, so you can use it like:
spi_exec "INSERT INTO mytable(columns...) VALUES(values..)"
set oid [spi_lastoid]
spi_exec "SELECT mytable_id from mytable WHERE oid=$oid"
It just didn't make sense for me to use plpgsql and pltcl, or just screw
them both and use SPI from C.
bob@redivi.com
system supports SO_PEERCRED requests for Unix sockets. This is an
amalgamation of patches submitted by Helge Bahmann and Oliver Elphick,
with some editorializing by yours truly.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.