Buildfarm member dromedary is still unhappy about the recently-added
ecpg "long long" tests. The reason turns out to be that it includes
"-ansi" in its CFLAGS, and in their infinite wisdom Apple have decided
to hide the declarations of strtoll/strtoull in C89-compliant builds.
(I find it pretty curious that they hide those function declarations
when you can nonetheless declare a "long long" variable, but anyway
that is their behavior, both on dromedary's obsolete macOS version and
the newest and shiniest.) As a result, gcc assumes these functions
return "int", leading naturally to wrong results.
(Looking at dromedary's past build results, it's evident that this
problem also breaks pg_strtouint64() on 32-bit platforms; but we
evidently have no regression tests that exercise that function with
values above 32 bits.)
To fix, supply declarations for these functions when the platform
provides the functions but not the declarations, using the same type
of mechanism as we use for some other similar cases.
Discussion: https://postgr.es/m/151935568942.1461.14623890240535309745@wrigleys.postgresql.org
On Sparc64, use of __attribute__(aligned(8)) with __int128 causes faulty
code generation in gcc versions at least through 5.5.0. We can work around
that by disabling use of __int128, so teach configure to test for the bug.
This solution doesn't fix things for the case of cross-compiling with a
buggy compiler; to support that nicely, we'd need to add a manual disable
switch. Unless more such cases turn up, it doesn't seem worth the work.
Affected users could always edit pg_config.h manually.
In passing, fix some typos in the existing configure test for __int128.
They're harmless because we only compile that code not run it, but
they're still confusing for anyone looking at it closely.
This is needed in support of commit 751804998, so back-patch to 9.5
as that was.
Marina Polyakova, Victor Wagner, Tom Lane
Discussion: https://postgr.es/m/0d3a9fa264cebe1cb9966f37b7c06e86@postgrespro.ru
This is necessary for ActivePerl 5.18 onwards and for Strawberry Perl.
It is not sufficient for 32-bit builds with newer Visual Studio; these
fail with error LINK2026. Back-patch to 9.3 (all supported versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
Back-patch of commit 751804998. The code known to be affected only exists
in 9.6 and later, but we do have some stuff using int128 in 9.5, so patch
back to 9.5.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Upon further review, our Bonjour code doesn't actually work with the
Avahi not-too-compatible compatibility library. While you can get it
to work on non-macOS platforms if you link to Apple's own mDNSResponder
code, there don't seem to be many people who care about that. Leaving in
the AC_SEARCH_LIBS call seems more likely to encourage people to build
broken configurations than to do anything very useful.
Hence, remove the AC_SEARCH_LIBS call and put in a warning comment instead.
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
On macOS the relevant functions require no special library, but elsewhere
we need to pull in libdns_sd.
Back-patch to supported branches. No docs change since the docs do not
suggest that this is a Mac-only feature.
Luke Lonergan
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
On Linux, shared memory segments created with shm_open() are backed by
swap files created in tmpfs. If the swap file needs to be extended,
but there's no tmpfs space left, you get a very unfriendly SIGBUS trap.
To avoid this, force allocation of the full request size when we create
the segment. This adds a few cycles, but none that we wouldn't expend
later anyway, assuming the request isn't hugely bigger than the actual
need.
Make this code #ifdef __linux__, because (a) there's not currently a
reason to think the same problem exists on other platforms, and (b)
applying posix_fallocate() to an FD created by shm_open() isn't very
portable anyway.
Back-patch to 9.4 where the DSM code came in.
Thomas Munro, per a bug report from Amul Sul
Discussion: https://postgr.es/m/1002664500.12301802.1471008223422.JavaMail.yahoo@mail.yahoo.com
Instead of using a cast to force the constant to be the right width,
assume we can plaster on an L, UL, LL, or ULL suffix as appropriate.
The old approach to this is very hoary, dating from before we were
willing to require compilers to have working int64 types.
This fix makes the PG_INT64_MIN, PG_INT64_MAX, and PG_UINT64_MAX
constants safe to use in preprocessor conditions, where a cast
doesn't work. Other symbolic constants that might be defined using
[U]INT64CONST are likewise safer than before.
Also fix the SIZE_MAX macro to be similarly safe, if we are forced
to provide a definition for that. The test added in commit 2e70d6b5e
happens to do what we want even with the hack "(size_t) -1" definition,
but we could easily get burnt on other tests in future.
Back-patch to all supported branches, like the previous commits.
Discussion: https://postgr.es/m/15883.1504278595@sss.pgh.pa.us
Commit 3c163a7fc's original choice to ignore all #define symbols whose
names begin with underscore turns out to be too simplistic. On Windows,
some Perl installations are built with -D_USE_32BIT_TIME_T, and we must
absorb that or we get the wrong result for sizeof(PerlInterpreter).
This effectively re-reverts commit ef58b87df, which injected that symbol
in a hacky way, making it apply to all of Postgres not just PL/Perl.
More significantly, it did so on *all* 32-bit Windows builds, even when
the Perl build to be used did not select this option; so that it fails
to work properly with some newer Perl builds.
By making this change, we would be introducing an ABI break in 32-bit
Windows builds; but fortunately we have not used type time_t in any
exported Postgres APIs in a long time. So it should be OK, both for
PL/Perl itself and for third-party extensions, if an extension library
is built with a different _USE_32BIT_TIME_T setting than the core code.
Patch by me, based on research by Ashutosh Sharma and Robert Haas.
Back-patch to all supported branches, as commit 3c163a7fc was.
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
This reverts commit b9515b6287.
Buildfarm results suggest that some platforms have versions of pselect(2)
that are not merely non-atomic, but flat out non-functional. Revert the
use-pselect patch to confirm this diagnosis (and exclude the no-SA_RESTART
patch as the source of trouble). If it's so, we should probably look into
blacklisting specific platforms that have broken pselect.
Discussion: https://postgr.es/m/9696.1493072081@sss.pgh.pa.us
Traditionally we've unblocked signals, called select(2), and then blocked
signals again. The code expects that the select() will be cancelled with
EINTR if an interrupt occurs; but there's a race condition, which is that
an already-pending signal will be delivered as soon as we unblock, and then
when we reach select() there will be nothing preventing it from waiting.
This can result in a long delay before we perform any action that
ServerLoop was supposed to have taken in response to the signal. As with
the somewhat-similar symptoms fixed by commit 893902085, the main practical
problem is slow launching of parallel workers. The window for trouble is
usually pretty short, corresponding to one iteration of ServerLoop; but
it's not negligible.
To fix, use pselect(2) in place of select(2) where available, as that's
designed to solve exactly this problem. Where not available, we continue
to use the old way, and are no worse off than before.
pselect(2) has been required by POSIX since about 2001, so most modern
platforms should have it. A bigger portability issue is that some
implementations are said to be non-atomic, ie pselect() isn't really
any different from unblock/select/reblock. Still, we're no worse off
than before on such a platform.
There is talk of rewriting the postmaster to use a WaitEventSet and
not do signal response work in signal handlers, at which point this
could be reverted, since we'd be using a self-pipe to solve the race
condition. But that's not happening before v11 at the earliest.
Back-patch to 9.6. The problem exists much further back, but the
worst symptom arises only in connection with parallel query, so it
does not seem worth taking any portability risks in older branches.
Discussion: https://postgr.es/m/9205.1492833041@sss.pgh.pa.us
LibreSSL defines OPENSSL_VERSION_NUMBER to claim that it is version 2.0.0,
but it doesn't have the functions added in OpenSSL 1.1.0. Add autoconf
checks for the individual functions we need, and stop relying on
OPENSSL_VERSION_NUMBER.
Backport to 9.5 and 9.6, like the patch that broke this. In the
back-branches, there are still a few OPENSSL_VERSION_NUMBER checks left,
to check for OpenSSL 0.9.8 or 0.9.7. I left them as they were - LibreSSL
has all those functions, so they work as intended.
Per buildfarm member curculio.
Discussion: <2442.1473957669@sss.pgh.pa.us>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to 9.5 and 9.6, per popular demand. The file structure was
somewhat different in earlier branches, so I didn't bother to go further
than that. In back-branches, we still support OpenSSL 0.9.7 and above.
OpenSSL 0.9.6 should still work too, but I didn't test it. In master, we
only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
awk's equality-comparison operator is "==" not "=". We got this right
in many places, but not in configure's checks for supported version
numbers of flex and perl. It hadn't been noticed because unsupported
versions are so old as to be basically extinct in the wild, and because
the only consequence is whether or not a WARNING flies by during
configure.
Daniel Gustafsson noted the problem with respect to the test for flex,
I found the other by reviewing other awk calls.
Create a "bsd" auth method that works the same as "password" so far as
clients are concerned, but calls the BSD Authentication service to
check the password. This is currently only available on OpenBSD.
Marisa Emerson, reviewed by Thomas Munro
Commit ac1d794 ("Make idle backends exit if the postmaster dies.")
introduced a regression on, at least, large linux systems. Constantly
adding the same postmaster_alive_fds to the OSs internal datastructures
for implementing poll/select can cause significant contention; leading
to a performance regression of nearly 3x in one example.
This can be avoided by using e.g. linux' epoll, which avoids having to
add/remove file descriptors to the wait datastructures at a high rate.
Unfortunately the current latch interface makes it hard to allocate any
persistent per-backend resources.
Replace, with a backward compatibility layer, WaitLatchOrSocket with a
new WaitEventSet API. Users can allocate such a Set across multiple
calls, and add more than one file-descriptor to wait on. The latter has
been added because there's upcoming postgres features where that will be
helpful.
In addition to the previously existing poll(2), select(2),
WaitForMultipleObjects() implementations also provide an epoll_wait(2)
based implementation to address the aforementioned performance
problem. Epoll is only available on linux, but that is the most likely
OS for machines large enough (four sockets) to reproduce the problem.
To actually address the aforementioned regression, create and use a
long-lived WaitEventSet for FE/BE communication. There are additional
places that would benefit from a long-lived set, but that's a task for
another day.
Thanks to Amit Kapila, who helped make the windows code I blindly wrote
actually work.
Reported-By: Dmitry Vasilyev Discussion:
CAB-SwXZh44_2ybvS5Z67p_CDz=XFn4hNAD=CnMEF+QqkXwFrGg@mail.gmail.com20160114143931.GG10941@awork2.anarazel.de
Previously latches for windows and unix had been implemented in
different files. A later patch introduce an expanded wait
infrastructure, keeping the implementation separate would introduce too
much duplication.
This basically just moves the functions, without too much change. The
reason to keep this separate is that it allows blame to continue working
a little less badly; and to make review a tiny bit easier.
Discussion: 20160114143931.GG10941@awork2.anarazel.de
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
Previously, configure would take any string, including an empty string,
leading to obscure compile failures in guc.c. It seems worth expending
a few lines of code to ensure that the argument is a decimal number
between 1 and 65535.
Report and patch by Jim Nasby; reviews by Alex Shulgin, Peter Eisentraut,
Ivan Kartyshov
Commit e2609323e set the minimum Tcl version we support to 8.4, but
I forgot to adjust the documentation to say the same. Some nosing
around for other consequences found that the configure script could
be simplified slightly as well.
Insert sd_notify() calls at server start and stop for integration with
systemd. This allows the use of systemd service units of type "notify",
which greatly simplifies the systemd configuration.
Reviewed-by: Pavel Stěhule <pavel.stehule@gmail.com>
Further portability fix for a967613911. Mingw- and MSVC-based builds
appear to be working fine, but Cygwin needs an extra tweak whereby the
new win32security.c file is explicitely added to the list of files to
build in pgport, per Cygwin members brolga and lorikeet.
Author: Michael Paquier
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
Per buildfarm member anchovy, 2.6.0 exists in the wild now.
Hopefully it works with Postgres; if not, we'll have to do something
about that, but in any case claiming it's "too old" is pretty silly.
This is like BSWAP32, but for 64-bit values. Since we've got two of
them now and they have use cases (like sortsupport) beyond CRCs, move
the definitions to their own header file.
Peter Geoghegan
Remove configure's checks for HAVE_POSIX_SIGNALS, HAVE_SIGPROCMASK, and
HAVE_SIGSETJMP. These APIs are required by the Single Unix Spec v2
(POSIX 1997), which we generally consider to define our minimum required
set of Unix APIs. Moreover, no buildfarm member has reported not having
them since 2012 or before, which means that even if the code is still live
somewhere, it's untested --- and we've made plenty of signal-handling
changes of late. So just take these APIs as given and save the cycles for
configure probes for them.
However, we can't remove as much C code as I'd hoped, because the Windows
port evidently still uses the non-POSIX code paths for signal masking.
Since we're largely emulating these BSD-style APIs for Windows anyway, it
might be a good thing to switch over to POSIX-like notation and thereby
remove a few more #ifdefs. But I'm not in a position to code or test that.
In the meantime, we can at least make things a bit more transparent by
testing for WIN32 explicitly in these places.
C89 requires <signal.h> to define sig_atomic_t, and there is no evidence
in the buildfarm that any supported platforms don't comply. Remove the
configure test to stop wasting build cycles on a purely historical issue.
(Once upon a time, we cared about supporting C89-compliant compilers on
machines with pre-C89 system headers, but that use-case has been dead for
quite a few years.)
I have some other fixes planned in this area, but let's start with this
to see if the buildfarm produces any surprising results.
With optimizations enabled at least one compiler, clang 3.7, optimized
away the crc intrinsics knowing that the result went on unused and has
no side effects. That can trigger errors in code generation when the
intrinsic is used, as we chose to use the intrinsics without any
additional compiler flag. Return the computed value to prevent that.
With some more pedantic warning flags (-Wold-style-definition) the
configure test failed to recognize the existence of _mm_crc32_u*
intrinsics due to an independent warning in the test because the test
turned on -Werror, but that's not actually needed here.
Discussion: 20150814092039.GH4955@awork2.anarazel.de
Backpatch: 9.5, where the use of crc intrinsics was integrated.
So far we have worked around the fact that some very old compilers do
not support 'inline' functions by only using inline functions
conditionally (or not at all). Since such compilers are very rare by
now, we have decided to rely on inline functions from 9.6 onwards.
To avoid breaking these old compilers inline is defined away when not
supported. That'll cause "function x defined but not used" type of
warnings, but since nobody develops on such compilers anymore that's
ok.
This change in policy will allow us to more easily employ inline
functions.
I chose to remove code previously conditional on PG_USE_INLINE as it
seemed confusing to have code dependent on a define that's always
defined.
Blacklisting of compilers, like in c53f73879f, now has to be done
differently. A platform template can define PG_FORCE_DISABLE_INLINE to
force inline to be defined empty.
Discussion: 20150701161447.GB30708@awork2.anarazel.de
The current version is adding a spurious -pthread option on some Darwin
systems that don't need it, which leads to a bunch of "unrecognized option
'-pthread'" warnings. There is a proposed fix for that in the upstream
autoconf archive's bug tracker, see https://savannah.gnu.org/patch/?8186.
This commit updates our version of ax_pthread.m4 to the "draft2" version
proposed there by Daniel Richard G. I'm using our buildfarm to help Daniel
to test this, before he commits this to the upstream repository.
