single integers, and lists of names, without surrounding them with quotes.
Remove all tokens which are defined as operators from ColID and ColLabel
to avoid precedence confusion. Thanks to Tom Lane for catching this.
to next integer. Previously, if selectivity was small, we could compute
very tiny scan cost on the basis of estimating that only 0.001 tuple
would be fetched, which is silly. This naturally led to some rather
silly plans...
Move CREATE FUNCTION/WITH clause to end of statement to get around
shift/reduce conflicts with type names containing "WITH".
Add lots of tokens as allowed ColId's and/or ColLabel's,
so this should be a complete set for the v7.0 release.
We still have an internal limit in the ODBC code of 8 columns per key,
but this should lay the groundwork for resolving that.
Includes reformulated query from Tom Lane.
apparently copied from the makefile for the perl5 interface module,
which needs it for reasons explained in src/interfaces/Makefile.
But none of those reasons apply to plperl.
keys lists of Constraint nodes. This eliminates a type pun that would
probably have caused trouble someday, and eliminates circular references
in the parsetree that were causing trouble now.
Also, change parser's uses of strcasecmp() to strcmp(). Since scan.l
has downcased any unquoted identifier, it is never correct to check an
identifier with strcasecmp() in the parser. For example,
CREATE TABLE FOO (f1 int, UNIQUE("F1"));
was accepted, which is wrong, and xlateSqlFunc did more than it should:
select datetime();
ERROR: Function 'timestamp()' does not exist
(good)
select "DateTime"();
ERROR: Function 'timestamp()' does not exist
(bad)
Clean up grotty coding in them, too. AFAICS from the CVS logs, these
have been broken since Postgres95, so I'm not going to insist on an
initdb to fix them now...
it in a separate object. There's no value in keeping the state separate,
and it creates dangling-pointer problems. Also, remove PQsetenv routines
from public API, until and unless they are redesigned to have a safer
interface. Since they were never part of the documented API before 7.0,
it's unlikely that anyone is calling them.
to avoid undue sensitivity to roundoff error, believe that a zero
or slightly negative range estimate should represent a small
positive selectivity, rather than falling back on a generic default
estimate.
1. C++ style comments in C source for ecpg ( // comment )
2. compiler finds wrong include file extern.h in ecpg/lib/descriptor.c
from
include path instead of workdir (rename it ?)
3. fe-connect getsockopt takes a socklen_t as fifth arg not int (use
SOCKET_SIZE_TYPE instead)
4. char vs unsigned char in psql calls to libpq
5. empty define that results in an empty but terminated line ( ; )
Now for all but point 3 I can supply changes to the
compiler flags, to make the compiler less pedantic.
Or is someone interested in the complications ?
in the meantime can someone apply the attached patch ?
Andreas
use a default value that's fairly small. We were generating a result
of about 0.1, but I think 0.01 is probably better --- want to encourage
use of an indexscan in this situation.
costs using the inner path's parent->rows count as the number of tuples
processed per inner scan iteration. This is wrong when we are using an
inner indexscan with indexquals based on join clauses, because the rows
count in a Relation node reflects the selectivity of the restriction
clauses for that rel only. Upshot was that if join clause was very
selective, we'd drastically overestimate the true cost of the join.
Fix is to calculate correct output-rows estimate for an inner indexscan
when the IndexPath node is created and save it in the path node.
Change of path node doesn't require initdb, since path nodes don't
appear in saved rules.
to simplify constant expressions and expand SubLink nodes into SubPlans
is done in a separate routine subquery_planner() that calls union_planner().
We formerly did most of this work in query_planner(), but that's the
wrong place because it may never see the real targetlist. Splitting
union_planner into two routines also allows us to avoid redundant work
when union_planner is invoked recursively for UNION and inheritance
cases. Upshot is that it is now possible to do something like
select float8(count(*)) / (select count(*) from int4_tbl) from int4_tbl
group by f1;
which has never worked before.
command, the entries in template/.similar can really be regular
expressions. This isn't a new feature, just an observation of what the
code already did.
had already been transformed. This led to failure in examples like
UPDATE table SET fld = (SELECT ...). Repair this, and revise the
comments to explain that transformExpr has to be robust against this
condition. Someday we might want to fix the callers so that
transformExpr is never invoked on its own output, but that someday
is not today.
user, so it doesn't need to be translated from the number to the name.
also ``create database ...'' does not take numbers for the encoding, so
the ENCODING variable does not need to be translated to a number, but left
as the text representation. a patch is supplied to make the changes i
have found to work. i was successful dumping and reloading my database
after these changes.
-
John M. Flinchbaugh
incorrect descriptions of a couple of log-related functions.
I will not force an initdb for this, but log() on a numeric won't
work until you do one...
In function parsing, try for an actual function of the given name and
input types before trying to interpret the function call as a type
coercion request, rather than after. Before, a function that had the
same name as a type and operated on a binary-compatible type wouldn't
get invoked. Also, cross-pollinate between func_select_candidates and
oper_select_candidates to ensure that they use as nearly the same
resolution rules as possible. A few other minor code cleanups too.
problem could be lack of parentheses. This addresses cases like
X UserOp UserOp Y, which will be parsed as (X UserOp) UserOp Y,
whereas what likely was wanted was X UserOp (UserOp Y).
16-Mar-00: trailing + or - is not part of the operator unless the operator
also contains characters not present in SQL92-defined operators. This
solves the 'X=-Y' problem without unduly constraining users' choice of
operator names --- in particular, no existing Postgres operator names
become invalid.
Also, remove processing of // comments, as agreed in the same thread.
running gcc and HP's cc with warnings cranked way up. Signed vs unsigned
comparisons, routines declared static and then defined not-static,
that kind of thing. Tedious, but perhaps useful...
/tmp/trace.out.
However, elog.h uses DEBUG as a log-level flag. As a result, tracing is
turned on even if the libpq++.so is built with DEBUG commented out in
the Makefile.
This patch changes libpq++ to use DEBUGFILE instead (which is not
defined anywhere else).
Oliver Elphick
We probably support a superset of the spec, but I don't have the spec
to confirm this.
Update regression tests to include tests for this format.
Update geometry.out with results from Linux RH 5.2 system
(for last decimal place).
We probably support a superset of the spec, but I don't have the spec
to confirm this.
Update regression tests to include tests for this format.
Fix single-space typo in printed message in regress.sh.
actually a type-coercion problem. If you have a function defined on
class A, and class B inherits from A, then the function ought to work
on class B as well --- but coerce_type didn't know that. Now it does.
mark query as having subselects if a subselect was added from a rule
WHERE condition (as opposed to a rule action). Also, fix adjustment
of varlevelsup so that it actually has some prospect of working when
inserting an expression containing a subselect into a subquery.
small changes in formatting.c code (better memory usage ...etc.) and
better
to_char's cache (will fastly for more to_char()s in one query).
(It is probably end of to_char() development in 7.0 cycle.)
Karel
after trying to resolve the item as an input-column name. This allows us
to be compliant with the SQL92 spec for queries that fall within the spec,
while still accepting the same out-of-spec queries as 6.5 did. You'll only
lose if there is an output column name that is the same as an input
column name, but doesn't refer to the same value. 7.0 will interpret
such a GROUP BY spec differently than 6.5 did. No way around that, because
6.5 was clearly not spec compliant.
CREATE DB/DROP DB. If you didn't think they were wrong, try what
happens when you compile with -DCLOBBER_FREED_MEMORY --- database
name displayed in error messages is trashed, because transaction
abort freed it. Also, remove trailing periods in error messages,
per our prevailing style.
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
(ie, allow rounding to occur at a digit position left of the decimal
point). Apparently this is how Oracle handles it, and there are
precedents in other programming languages as well.
Since we detect oversize tuples elsewhere, I see no reason not to allow
string constants that are 'too long' --- after all, they might never get
stored in a tuple at all.
YY_READ_BUF_SIZE, which turns out to have nothing to do with buffer size.
It's just a totally arbitrary upper limit on how much data myinput() is
asked for at one time.
that the inputs to a given operator can be recursively simplified to
constants, it was evaluating the operator using the op's *original*
(unsimplified) arg list, so that any subexpressions had to be evaluated
again. A constant subexpression at depth N got evaluated N times.
Probably not very important in practical situations, but it made us look
real slow in MySQL's 'crashme' test...
gone, replaced by plain a_expr. The few places where we needed to
distinguish NULL from a_expr are now handled by tests inside the actions
rather than by separate productions. This allows us to accept queries
like 'SELECT 1 + NULL' without requiring parentheses around the NULL.
subplan: do it if subplan has subplans itself, and always do it if the
subplan is an indexscan. (I originally set it to materialize an indexscan
only if the indexqual is fairly selective, but I dunno what I was
thinking ... an unselective indexscan is still expensive ...)
coercion code. I'm beginning to wonder why we have separate candidate
selection routines for functions, operators, and aggregates --- shouldn't
this code all be unified? But meanwhile,
SELECT 'a' LIKE 'a';
finally works; the code for dealing with unknown input types for operators
was pretty busted.
per pghackers discussion around 20-Feb. Also add specific error messages
for unterminated comments and unterminated quoted strings. These things
are nonissues for input coming from psql, but they do matter for input
coming from other front ends.
array. This allows processing of conninfo strings to be made thread-safe,
at the cost of a small memory leak in applications that use
PQconndefaults() and are not updated to free the returned array via
the new PQconninfoFree() function. But PQconndefaults() is probably not
used very much, so this seems like a good compromise.
nodes. The former version failed to check permissions of relations that
were referenced in second and later clauses of UNIONs, and it did not
check permissions of tables referenced via inheritance.
The regression test script runcheck.sh doesn't seem able to
handle the blank line on the end of the resultmap file.
Here's a patch to remove it!!
Keith.
1) adds NetBSD shared lib support on both ELF and a.out platforms
2) replaces "-L$(LIBPQDIR) -lpq" with "$(LIBPQ)" defined in
Makefile.global. This makes it much easier to build stuff in
the source tree after you've already installed the libraries.
3) adds TEMPLATEDIR in Makefile.global that indicates where the
database templates are stored. This separates the template files
from real libraries that are installed in $(LIBDIR).
4) changes include order of <readline/readline.h> and <readline.h>.
The latest GNU readline installs its headers under a readline
subdirectory.
In addition to applying the patch below the following files need to be copied:
backend/port/dynloader:
bsd.h -> netbsd.h
bsd.c -> netbsd.c
include/port:
bsd.h -> netbsd.h
makefiles:
Makefile.bsd -> Makefile.netbsd
It would be great to see this incorporated into the source tree before
the 7.0 release is cut.
Thanks!
-- Johnny C. Lam <lamj@stat.cmu.edu>
Here's a patch to fix the " '.' not allowed in db path" problem I ran into.
I removed '.' from the set of illegial characters, but added backtick. I also
included an explicit test for attempting include a reference to a parent dir.
How that?
Ross
I try change prompt in the psql, but it is set '.' (as '%m') for
non-TCP/IP
connection. This small patch try use uname() information for non-TCP/IP
instead '.'.
Karel
the to_char() source code is large, here are regression tests for
numeric/timestamp/int8 part. It is probably enough test for formatting
code in the formatting.c module. The others (float4/float8/int4) types
share this formatting code and eventual bugs for these types aren't
few probable.
Patch fix timestamp_to_char() for infinity/invalid timestamp too.
Karel
(Subj: [PORTS] initdb problem on NT with 7.0). Since nobody helped me,
I had to find out the reson. The difference between NT and Linux (for
instance) is that "open( path, O_RDWR );" opens a file in text mode. So
sometime less block can be read than required.
I suggest a following patch. BTW the situation appeared before, see
hba.c, pqcomm.c and others.
Alexei Zakharov
when you have networks with the same prefix, but different netmasks.
This is due to the fact that occassionally there is random
(uninitialized?)
data in the extra bits past the point where the netmask cares about
them.
ie (real data from a real live database):
10.0/10 == 00001010.00100000.00100000.00011000
10.0/11 == 00001010.00000000.00000000.00000000
^ Bad data, normally never seen
The v4bitncmp() function was only taking one bit length argument so
it would determine that the networks were different, even though
they really aren't (and the netmask test wouldn't be used). This
ONLY happens if the tuple with the longer bit length is used as the
ip_bits() for the v4bitncmp call AND there happens to be junk data
in place in the shorter tuple. Odd and random, but I saw it happen
a couple times so...
Ryan Mooney
as independent clauses in the grammar. analyze.c takes care of putting
the data where it belongs and complaining about invalid combinations.
Also, make TEMP (and TEMPORARY) non-reserved words.
failures. Fix some outright bugs too, including a reference to
uninitialized memory that would cause failures like this one:
select -('1234567890.1234567'::text);
ERROR: Unable to locate type oid 2139062143 in catalog
such as bpchar(char_expression, N), and pull out the attrtypmod that
the function is coercing to. This allows correct deduction of the
column type in examples such as
CREATE VIEW v AS SELECT f1::char(8) FROM tbl;
Formerly we labeled v's column as char-of-unknown-length not char(8).
Also, this change causes the parser not to insert a redundant length
coercion function if the user has explicitly casted an INSERT or UPDATE
expression to the right length.
fields, nor with bpchar and varchar fields that have typmod -1. The
latter effectively have an unspecified length, so I made them display
as char() and varchar() rather than falsely equating them to char(1)
and varchar(1).
it's a good idea to choose the directory size based on the expected
number of entries. But ShmemInitHash was using a hard-wired constant.
Boo hiss. This accounts for recent report of postmaster failure when
asking for 64K or more buffers.
platform (psql and libpq):
The file "config.h.win32" in the include\ directory (from my patch from
2000-01-18) is missing from the tree. It needs to be put back :-)
The following patch has to be applied in the interfaces\libpq directory.
//Magnus
thinks the connection is idle, the error message is displayed as if
it were a NOTICE. This seems better than dropping the message on
the floor ... particularly if the message is the backend telling us
why it's about to close the connection. The previous behavior was
Backend message type 0x45 arrived while idle
pqReadData() -- backend closed the channel unexpectedly.
which is not real helpful.
as a unary minus operator for numeric. Now that long numeric constants
will get converted to NUMERIC in early parsing, it's essential to have
numeric->int8 conversion to avoid 'can't convert' errors on undecorated
int8 constants. Threw in the rest for completeness while I was in the
area.
I did not force an initdb for this, since the system will still run
without the new pg_proc/pg_operator entries. Possibly I should've.
and produce either FLOAT8 or NUMERIC output depending on whether the
value fits in a float8 or not. This is almost back to the way the
code was before I changed T_Float, but there is a critical difference:
now, when a numeric constant doesn't fit in float8, it will be treated
as type NUMERIC instead of type UNKNOWN.
2. Regression tests fail for types int2 and int4 (which can easily be
fixed by adding entries to resultmap) aswell as float8 and geometry,
where floating point numbers appear to be rounded a little differently
than in your expected results (besides that I also need the positive
zeros file). I'm including a patch for the first 2, but I don't know
whether the latter two are actually a bug in postgres or a bug in the
OS or even allowed difference. I'm including my results for reference.
Rolf Grossmann
tests for the Foreign Key support in 7.0 which
was made against a CVS copy from this
afternoon.
This modifies
src/test/regress/sql/run_check.tests
src/test/regress/sql/alter_table.sql
src/test/regress/expected/alter_table.out
src/test/regress/sql/foreign_key.sql
src/test/regress/expected/foreign_key.out
sszabo@bigpanda.co
integers) to be strings instead of 'double'. We convert from string form
to internal representation only after type resolution has determined the
correct type for the constant. This eliminates loss-of-precision worries
and gets rid of the change in behavior seen at 17 digits with the
previous kluge.
portion of the query result that will be retrieved. As far as I could
tell, the consensus was that we should let the planner do the best it
can with a LIMIT query, and require the user to add ORDER BY if he
wants consistent results from different LIMIT values.
as representing a type coercion request in more cases than we did before.
It will work now whenever no underlying function is required, ie if the
coercion is binary-compatible or if the argument is a previously untyped
string constant. Otherwise, you still need a real function to exist.
represent the result of a binary-compatible type coercion. At runtime
it just evaluates its argument --- but during type resolution, exprType
will pick up the output type of the RelabelType node instead of the type
of the argument. This solves some longstanding problems with dropped
type coercions, an example being 'select now()::abstime::int4' which
used to produce date-formatted output, not an integer, because the
coercion to int4 was dropped on the floor.
agg_select_candidate, which could cause them to keep more candidates
than they should and thus fail to select a single match. I had
previously fixed the identical bug in oper_select_candidate, but
didn't realize that the same error was repeated over here.
Also, repair func_select_candidate's curious notion that it could
scribble on the input type-OID vector. That was causing failure to
apply necessary type coercion later on, leading to malfunction of
examples such as select date('now').
a few bricks shy of a load concerning knowing all the date/time types.
This is real bad because it interferes with func_select_candidate()'s
willingness to disambiguate functions --- func_select_candidate() will
punt unless all the available choices have the same type category.
I think this whole mechanism needs redesigned, but in the meantime
this is a needed patch.
command line processing. As it stood, a bogus PGOPTIONS value from
a client would force a database system restart. Not bad as a denial-
of-service attack...
interpret a column name as an output column alias (targetlist AS name),
ather than a real column name as it ought to. According to the spec,
only ORDER BY should look at output column names. I left in GROUP BY's
willingness to use an output column number ('GROUP BY 2'), even though
this is also contrary to the spec --- again, only ORDER BY is supposed
to accept that. But there is no possible reason to want to GROUP BY
an integer constant, so keeping this old behavior won't break any
SQL-compliant queries. DISTINCT ON will behave the same as GROUP BY.
Change numerology regress test, which depended on the incorrect
behavior.
erroneous expected output for RESET DateStyle: should be ISO now.
Fix run_check.sh so that test postmaster is started with PGDATESTYLE=ISO,
else the horology test won't pass.
variable, instead calling same code in variable.c that is used to parse
SET DATESTYLE. Fix bug: although backend's startup datestyle had been
changed to ISO, 'RESET DATESTYLE' and 'SET DATESTYLE TO DEFAULT' didn't
know about it. For consistency I have made the latter two reset to the
PGDATESTYLE-defined initial value, which may not be the same as the
compiled-in default of ISO.
equivalent now, which should make Windows and Mac clients happier.
Also fix failure to handle SQL comments between segments of a multiline
quoted literal.
appropriate btree three-way comparison routine. Not clear why the
three-way comparison routines were being used in some paths and not
others in btree --- incomplete changes by someone long ago, maybe?
Anyway, this makes for a nice speedup in CREATE INDEX.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
Version: 6.5.3-11
Severity: important
'char' is not a signed type by default on powerpc; therefore a character
can
never be equal to EOF (-1). A patch is attached.
Dan
/--------------------------------\ /--------------------------------\
| Daniel Jacobowitz |__| SCS Class of 2002 |
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
Tom Lane
Bruce Momjian
Michael Meskes
Thomas G. Lockhart
Peter Eisentraut
Tatsuo Ishii
Vadim B. Mikheev
Hiroshi Inoue
Jan Wieck
Byron Nikolaidis